knives made in Italy

Intended use: sports/steak

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel W1.4116
Blade treatment: satin finish
Handle: ebony
Blade length: 83mm.
Blade thickness: 2.5mm.
Closed length: 103mm.
Total length: 185mm.
Closed thickness: 17mm.
Weight: 88g.
Closure: Liner Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

Intended use: sporting/for table use

Type of production: Industrial
Country of Production: Italy
Blade: Stainless damascus steel "Rose"
Blade finish: -
Handle: fat carbon with green highlights
Blade length: 97mm.
Blade thickness: 2.5mm.
Length closed: 118mm.
Total length: 217mm.
Thickness when closed: 17mm.
Weight: 88g.
Closure: Liner Lock
Clip: -
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio "Atti" Morotti

FLAME LIGHT, practical folding knife and now even lighter!

BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael Zieba

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available NO
* Sharpness: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: YES
* Checked and Certified by our internal laboratory

Type of production: Industrial
Country of production: Italy
Blade: in N690Co stainless steel
Finish: Testudo burnishing
Handle: Anodized aeronautical aluminum anticorodal
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 210mm.
Weight: 152g.
Sheath: -
Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificates
Notes: emergency blade with snap opening (length. 8 cm) - glass breaker - model from 2013 now out of production

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On order
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Packaging: Zip pouch, original
* Scabbard: Leather, pocket size, original
* Manuals, Certificates and Warranties: Certificate of guarantee and authenticity present.
* Checked and Certified by our in-house laboratory

Intended use: sports/collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel M390 60/61HRC
Blade finish: satin finish
Handle: titanium
Blade length: 176mm.
Blade thickness: 2.5mm.
Length closed: 99mm.
Total length: 175mm.
Weight: 64g.
Closure: Frame Lock
Clip: removable, titanium
Scabbard: Leather pouch
Packaging: Zip pouch and certificate of authenticity and warranty 
Notes: Designed and made entirely by hand in Italy by Franco "Frank" Bonassi, Decemnre 2019 example with serial number T27 - Previously purchased, from private collection

FLAME LIGHT, practical folding knife and now even lighter!

BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.

Intended Use: Sporting


Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael Zieba

Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.

The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.

To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade

Type of production: semi-artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: in plywood with satin brass ring with nickel plating
Blade length: 100mm.
Blade thickness: 2.5mm.
Closed length: 127mm.
Thick when closed: 22mm.
Total length: 225mm.
Weight: 68g.
Closure: viro block

The handles are made of Italian olive wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid safety ring in nickel plated brass equipped with a special locking device (covered by patent n. active partner of this project) which can be activated both in the open and in the closed position.

As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.

The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.

Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: Collini Steel

Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.

The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.

To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade

Type of production: semi artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: olive wood
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Thick when closed: 22mm.
Total length: 212mm.
Weight: 65g.
Closure: viro block

The handles are made of Italian olive wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n. of this project) which can be activated both in the open position and in the closed position.

As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.

The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.

Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: Collini Steel

Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.

The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.

To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade

Type of production: semi artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: in walnut wood
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 190mm.
Weight: 46g.
Closure: viro block

The handles are made of antique and oiled walnut wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.

As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.

The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.

Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: Collini Steel

Intended Use: Sporty / Gentleman / EDC

Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade Treatment: Satin
Handle: Titanium
Blade length: 76mm.
Blade thickness: 2.5mm.
Length closed: 102mm.
Total lenght: 174mm.
Thickness when closed: 12mm.
Weight: 72g.
Opening: two hands
Washers: Brass
Closure: Slip Joint
Clip: -
Scabbard: leather, with belt loop with magnetic release
Package: Cardboard box with logos MKM Maniago Knife Makers
Notes: Design by Bruno Bruna Graciut, Master CIC (Italian Knife Makers Guild)

Intended Use: Sporty / Gentleman / EDC

Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Aluminium
Blade length: 76mm.
Blade thickness: 2.5mm.
Length closed: 102mm.
Total lenght: 174mm.
Thickness when closed: 12mm.
Weight: 53g.
Opening: two hands
Washers: Brass
Closure: Slip Joint
Clip: -
Scabbard: leather, with belt loop with magnetic release
Package: Cardboard box with logos MKM Maniago Knife Makers
Notes: Design by Bruno Bruna Graciut, Master CIC (Italian Knife Makers Guild)

Intended Use: Sporty / Gentleman / EDC

Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Aluminium
Blade length: 76mm.
Blade thickness: 2.5mm.
Length closed: 102mm.
Total lenght: 174mm.
Thickness when closed: 12mm.
Weight: 53g.
Opening: two hands
Washers: Brass
Closure: Slip Joint
Clip: -
Scabbard: leather, with belt loop with magnetic release
Package: Cardboard box with logos MKM Maniago Knife Makers
Notes: Design by Bruno Bruna Graciut, Master CIC (Italian Knife Makers Guild)

The knife is very original, the blade recalls that of the grafting knife, a well-known traditional knife from Maniago.
In - Estro is made looking to the past but with modern design and materials. Lightweight and practical to carry thanks to its E.D.C steel clip. Carbon D 2 tool steel is used for the blade, while anodized aluminum with G10 inserts is used for the handles.

Intended use: sports / steak

Type of production: Industrial
Country of production: Italy
Blade: D2 steel
Blade treatment: satin finish
Handle: G10
Blade length: 65mm.
Blade thickness: 2.5mm.
Closed length: 105mm.
Total length: 200mm.
Thick when closed: 17mm.
Weight: 68g.
Closure: Slip Join
Clip: absent
Sheath: -
Packaging: cardboard box with Maserin logos
Note:

The knife is very original, the blade recalls that of the grafting knife, a well-known traditional knife from Maniago.
In - Estro is made looking to the past but with modern design and materials. Lightweight and practical to carry thanks to its E.D.C steel clip. Carbon D 2 tool steel is used for the blade, while anodized aluminum with micarta inserts is used for the handles.
Intended use: sports / steak

Type of production: Industrial
Country of production: Italy
Blade: D2 steel
Blade treatment: satin finish
Handle: Micarta and aluminum
Blade length: 65mm.
Blade thickness: 2.5mm.
Closed length: 105mm.
Total length: 200mm.
Thick when closed: 17mm.
Weight: 68g.
Closure: Slip Join
Clip: absent
Sheath: -
Packaging: cardboard box with Maserin logos
Note:

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: Bohler M390 stainless steel
Blade finish: Black PVD
Handle: Titanium PVD and Fat Carbon Red Lava
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 61g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Frame Lock
Clip: PVD stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael Zieba

"My idea behind the Gitano was to make a folding knife that is based on old south european folding knives in a new style. What I like about these knives is its elegant lines and often large blades in relation to the handles". Gudy van Poppel
 
LionSteel loved Gudy 's idea and decided to start this new collaboration with him and Tools For Gents that helped us to devolope the final versions. Gitano is an E.D.C. (Every Day Carry) folding knife that joined the "Tradition by LionSteel" collection.
 
Gitano comes with a Niolox stailess steel satin blade. It is available with 6AI4V titanium bolsters and liners, while the scales can be made of olive wood, santos wood, green canvas, black G10 or carbon fiber.
 
For its light weight and average dimensions, Gitano is the new elegant slip-point knife to carry with you in every situation.

Intended use: Gentleman / EDC

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel Niolox 59 / 60HRC
Blade treatment: Satin finish
Handle: Titanium 6Al4V and micarta
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 105mm.
Total length: 190mm.
Thick when closed: 12mm.
Weight: 76g.
Closure: SlipJoint
Clip: -
Sheath: -
Packaging: cardboard box with LionSteel logos
Note: -

bestMAN is an E.D.C (Every Day Carry) folding knife born to be the best companion for daily activities. lionSTEEL takes a leap backwards towards the classics, creating a modern version of this knife with innovative technologies and high quality materials.

bestMAN is characterized by a M390 sintered steel clip blade, 6AI4V titanium escutcheons and natural micarta grips. For its lightness and small size, bestMAN is the new slipjoint knife ideal to take with you on any occasion.

Intended use: Gentleman / EDC

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Titanium 6Al4V and micarta
Blade length: 71mm.
Blade thickness: 2.5mm.
Closed Length: 96.5mm.
Total length: 170mm.
Thick when closed: 11.7mm.
Weight: 68g.
Closure: SlipJoint
Clip: -
Sheath: -
Packaging: cardboard box with LionSteel logos
Note: -

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with Fox logos and embroidered fabric key ring

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with Fox logos and embroidered fabric key ring

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with Fox logos and embroidered fabric key ring

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

Intended use: sports / steak

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel W1.4116
Blade treatment: satin finish
Handle: root
Blade length: 97mm.
Blade thickness: 2.5mm.
Length closed: 118mm.
Total length: 217mm.
Thick when closed: 17mm.
Weight: 88g.
Closure: Liner Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

Intended use: sports / steak

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel W1.4116
Blade treatment: satin finish
Handle: root
Blade length: 97mm.
Blade thickness: 2.5mm.
Length closed: 118mm.
Total length: 217mm.
Thick when closed: 17mm.
Weight: 88g.
Closure: Liner Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

Intended use: sports / steak

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel W1.4116
Blade treatment: satin finish
Handle: root
Blade length: 97mm.
Blade thickness: 2.5mm.
Length closed: 118mm.
Total length: 217mm.
Thick when closed: 17mm.
Weight: 88g.
Closure: Liner Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model keeps all the features of the BF0 updated with the new High Speed Razor Opening opening system. Available in the following versions: BF0 R CD Desert with stone washed blade and HCS and BF0 R CD Stone Washed with stone washed blade and black grip.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 55mm.
Blade thickness: 2.5mm.
Length closed: 85mm.
Total length: 140mm.
Weight: 53g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

Target: Tactical / CQC

Type of production: Industrial
Country of production: Italy
Blade: stainless steel Elmax 59/61HRC
Blade treatment: Black Hidroglider
Handle: carbon fiber and bronze CeraKote titanium
Blade Length: 62mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Total length: 174mm.
Closed thickness: 11mm.
Weight: 82g.
Opening: Carson Flipper system and Emerson Wave
Washers: Brass
Closure: Titanium Framelock with Stainless Steel Swing
Clip: Titanium, removable and reversible
Sheath: zip pocket in synthetic leather
Packing: cardboard box with Fox logos
Notes: Patents Emerson Pat. 5.878.500

Target: Tactical / CQC

Type of production: Industrial
Country of production: Italy
Blade: Elmax stainless steel 59/61HRC
Blade treatment: satin finish
Handle: carbon fiber and titanium
Blade Length: 62mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Total length: 174mm.
Closed thickness: 11mm.
Weight: 82g.
Opening: Carson Flipper system and Emerson Wave
Washers: Brass
Closure: Titanium Framelock with Stainless Steel Swing
Clip: Titanium, removable and reversible
Sheath: zip pocket in synthetic leather
Packing: cardboard box with Fox logos
Notes: Patents Emerson Pat. 5.878.500

The series Kilama by Consigli is a modern interpretation of Italian regional knives.
The materials and finishes remain the same as always but the line has the form "new"

Total length: 185
Blade length: 80
Blade thickness: 2.5
Weight. 55g
Steel: 420
Hanfle: amaranth wood
Sheath: -
Package: box with cleaning kit

The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Weight: 63g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Maremma in Olivo - Series Kilama MFO18 - knife

The series Kilama Councils is a modern interpretation of Italian regional knives.
The materials and finishes remain the same as always but the line has the form "new"
that reflect the traditional and regional Italian classics knives.

Total length: 185
Blade length: 80
blade thickness: 2.5
weight. 55g
Steel: 420
manicatura: amaranth wood
Sheath: fabric
Package: Box Advice with cleaning kit knife

The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Type of production: artisan

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: olive wood
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 185mm.
Weight: 50g.
Closing: retention spring
Packaging: Tips box with knife cleaning kit
Sheath: fabric case

The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: amaranth wood
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 185mm.
Weight: 55g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Made according to the ancient art of knives, the Piedmontese knife, typical of the Piedmont Region, retains its original sober line.
Solid and functional, the blade is in stainless steel and the handle is a monobloc made of bovine horn.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 90mm.
Total length: 180mm.
Weight: 50g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Intended use: sporty / gentleman

Type of production: industrial
Production Blade: Italy
Blade: AUS-8 stainless steel
Treatment Blade: satin
Handle: Fiberglass
Blade length: 78mm.
Blade Thickness: 2.5mm.
Closed Length: 100mm.
Total length: 175mm.
Thick when closed: 10mm.
Balance: -
Weight: 52g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Notes: Design by Puddu

Intended use: sporty / gentleman

Type of production: industrial
Production Blade: Italy
Blade: AUS-8 stainless steel
Treatment Blade: satin
Handle: Carbon Fiber
Blade length: 78mm.
Blade Thickness: 2.5mm.
Closed Length: 100mm.
Total length: 175mm.
Thick when closed: 10mm.
Balance: -
Weight: 50g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Notes: Design by Puddu

The "Roman" testifies to the widespread mentality in the Papal States for which the knife was considered as a faithful friend to be constantly worn "in his pocket" and to be unleashed at the first hint of a fight or for an immediate response.

Many elements constituting the "Roman" bear witness to the offensive use that distinguished this knife: the sharp blade, the decorations of the lattice handle or fish bone that served to improve the grip, the locking system with fixed spring that prevented the knife could close up accidentally and that at the time of the opening emitted a dry noise that exalted the aggressive expression.

Destination of use: collection

Type of production: artisan
Blade: 420 stainless steel
Country of production: Italy
Grip: engraved ox horn
Blade length: 130mm.
Blade thickness: 2.5mm.
Length closed: 160mm.
Total length: 290mm.
Weight: 106g.
Closure: rear ring lock
Notes: made entirely by hand in the city of Scarperia (FI)

Weight: 140g.

Maserin - Gourmet Ebony - 380/EB - knife

Intended Use: Sport / Table

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel 440
Treatment Lama: -
Handle: ebony wood
Blade length: 97mm.
Blade thickness: 2.5mm.
Length closed: 118mm.
Total length: 217mm.
Thick when closed: 17mm.
Balance: -
Weight: 88g.
Lock: Liner Lock
Clip: -
Sheath: leather pocket
Packaging: cardboard box with logos Maserin
Notes: Design by Acts

Type of production: Industrial
Blade: N690Co 58HRC stainless steel
Country of production: Italy
Handle: Nylon
Blade length: 55mm.
Blade Thickness: 2.5mm.
Closed Length: 85mm.
Overall length: 140mm.
Weight: 75g.
locking system: Liner Lock
Clip: reversible and removable, stainless steel