Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.

The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.

Intended use: allrounder utility 

Blade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpener

Roselli's version of the ultimate outdoor knife is now also available in a full tang model with hidden steel (where the blade runs through the entire handle) to give you better support and balance when you use it intensely. All Roselli full tang knives are long-lasting, sturdy and perfect for heavy-duty use.

The design is inspired by traditional carving knives and, thanks to its handy size, can be adapted anywhere. The knife is also effective as a hunting knife and the size of the blade makes it suitable for hunters who prefer to hunt smaller game.

This new full tang knife features a carbon steel blade and a stabilized birch handle, featuring an eyelet hole for strap attachment. Wood stabilization is the process of strengthening the wood so that it no longer reacts to changes in humidity, which cause the wood to shrink or swell.

Intended use: Hunting/Sports

Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Blade production: Finland
Handle: Arctic Birch
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: -
Total length: 195mm.
Balancing: -
Weight: 145g.
Closure: -
Clips: -
Sheath: light brown leather
Note: -

The M23 Ranger Cub knife features a 6.5-centimeter carbon steel blade with an induction-hardened edge at 62 HRC. Remember that carbon steel always requires some care, so keep the blade clean and wash and dry it after each use. You can also apply a little oil to the blade from time to time. With proper care, corrosion is kept at bay and the blade remains intact.

The handle material is TPV, thermoplastic vulcanized, a type of rubber-like plastic material that resists wear, impact, chemicals and temperature changes almost indefinitely. The secure grip remains firm even in wet conditions.

Thanks to the Kydex sheath, the knife can be easily carried on the belt in a horizontal position.

Intended Use: Hiking / Hunting / Bushcraft

Production type: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 62HRC
Blade treatment: Dual Tone
Handle: TPV (vulcanized thermoplastic)
Blade length: 65mm.
Blade thickness: 3.3mm.
Total length: 165mm.
Weight: 78g.
Sheath: Kydex
Packaging: Cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka Peltonen

The Ranger Puukko is a versatile knife ideal for international special units and civilian use such as bushcraft, hunting and camping.

Made with precision and high-quality materials, it offers a secure grip, a sharp blade and a practical sheath. No frills, it ensures safety and consistent performance in all seasons and circumstances. The EasyLock composite sheath allows for safe and quiet carrying.

It synthesizes the traditional Puukko with the ruggedness of a military knife, symbolizing perseverance and the pursuit of perfection. The Ranger Puukko is a reliable companion in any environment, embodying the resilience and functionality of Nordic knives.

Intended Use: Hiking / Hunting / Bushcraft

Type of production: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 59HRC
Blade treatment: Dual Tone, partially treated with Cerakote
Handle: TPV (vulcanized thermoplastic)
Blade length: 119mm.
Blade thickness: 4.25mm.
Total length: 243mm.
Weight: 180g.
Sheath: composite material
Packaging: cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka Peltonen

A minimalist workhorse: this ultra-versatile kitchen tool was built, designed and crafted to give you the best. From field to table, this unique knife combines the power and exceptional quality of Benchmade's proprietary SelectEdge technology for unparalleled cutting.

The wide CPM-154 blade extends to a precisely shaped handle that provides a comfortable grip for extended use. The knife comes with a plastic sheath that allows liquids to drain away from the knife thanks to drainage holes.

Intended Use: Universal household and field kitchen knife

Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-154CM 58/61HRC
Blade finish: Black DLC
Handle: G10 Green and Carbon Fiber
Blade length: 148mm.
Blade thickness: 2.5mm.
Total length: 273mm.
Weight: 179g.
Blade Cover: plastic material, with drainage holes
Packaging: Box made of cardboard and recycled materials, with Benchmade logos
Notes: designed to be used both in the home kitchen and on hikes

A minimalist workhorse: this ultra-versatile kitchen tool was built, designed and crafted to give you the best. From field to table, this unique knife combines the power and exceptional quality of Benchmade's proprietary SelectEdge technology for unparalleled cutting.

The wide CPM-154 blade extends to a precisely shaped handle that provides a comfortable grip for extended use. The knife comes with a plastic sheath that allows liquids to drain away from the knife thanks to drainage holes.

Intended Use: Universal household and field kitchen knife

Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-154CM 58/61HRC
Blade Finish: Stonewashed
Handle: Tan Richlite and Black G10
Blade length: 148mm.
Blade thickness: 2.5mm.
Total length: 273mm.
Weight: 179g.
Blade Cover: plastic material, with drainage holes
Packaging: Box made of cardboard and recycled materials, with Benchmade logos
Notes: designed to be used both in the home kitchen and on hikes

Intended use: tactical / sports

Type of production: Industrial
Country of production: Taiwan
Blade: SK-5 carbon steel
Blade treatment: Black Tuff-Ex painting
Handle: Kray-Ex (Kraton)
Blade length: 155mm.
Blade thickness: 5mm.
Total length: 275mm.
Balancing: on the guard branch
Weight: 230g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos

This is a smaller version of Bo Randall's original knife, made in the Scagel knife style. 12.2 cm blade made of 4.5 mm thick stainless steel. This size and shape are popular with outdoor activity experts worldwide. It has a nickel silver guard and back cap and a handle made of authentic Indian deer antler. It weighs about 168 grams and comes with a brown leather sheath.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting/fishing

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: deerskin with through-guard and nickel silver tang
Blade length: 122mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Balance: backward
Weight: 168g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

The Model 27 is an ideal all-purpose sports knife. This knife has a stainless steel blade, 5mm blade thickness and 147mm length with concealed tang construction. The handle has nickel silver guard and pommel and a leather and walnut wood ring handle with black micarta and nickel silver spacers. 

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: made of leather and walnut wood rings with through-guard and nickel silver tang
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 262mm.
Balance: backward
Weight: 230g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: ergonomic, walnut wood with through-guard and brass tang
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 245mm.
Balance: backward
Weight: 290g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

ExtremaRatio - Dobermann IV Knife - S600 - Tactical Black represents the evolution of the first and most classic Extrema Ratio model, the K1 DOBERMANN. Since 1997, the DOBERMANN model has undergone significant aesthetic and design changes, adapting to the evolution of tastes and trends while remaining true to the original designs. Versatility of use and structural resistance are the main characteristics of DOBERMANN IV S600, making it ideal for hunting, survival, camping, and military use.

• • Type: Tactical / Collection
  • Blade Production: Italy
  • Blade: Stainless steel S600 64hrc
  • Blade Treatment: EXP DARK
  • Handle: Forprene
  • Blade Length: 185mm
  • Blade Thickness: 6.3mm
  • Total Length: 315mm
  • Weight: 360g
  • Sheath: Cordura with M.O.L.L.E attachments
  • Packaging: Cardboard box with Extrema Ratio logos

The blade of the DOBERMANN IV S600, made from Böhler S600 steel, offers excellent hardness, wear resistance, and toughness, thanks to the high content of molybdenum, tungsten, and vanadium. The addition of cobalt promotes the formation of small carbides, further improving wear resistance. With a hardness of 64 HRC, it ensures long-lasting edge retention. The “EXP DARK” teflon coating protects the steel from oxidation.

DOBERMANN IV S600 features a green forprene handle with a glass-breaking tang. It comes with a green cordura thigh sheath, adaptable for both left and right-handed users and compatible with the M.O.L.L.E system.

Intended Use: Excursionism / Heavy Duty

Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC
Blade Finish: Black
Handle: Micarta
Blade Length: 140mm.
Blade thickness: 6.3mm.
Total length: 257mm.
Balance: advanced
Weight: 433g.
Sheath: leather, handcrafted
Packaging: certificate of guarantee and authenticity
Notes: Each knife is unique and handcrafted in every part

This Lynx model knife from Wander Tactical is handcrafted and handcrafted by Dino and Alex, founders of Wander Tactical Research Team, known for their ability to create sturdy and reliable cutting tools. This custom knife represents excellence in Italian artisan cutlery, combining high quality materials with craftsmanship

Technical specifications:

Type of production: Artisan
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Marble Gun Coated
Handle: Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 237mm.
Balancing: advanced
Weight: 293g.
Sheath: in Kydex, thermoformed
Packaging: without packaging, supplied with its own certificate of authenticity
Notes: Each knife is unique and handcrafted

COL MOSCHIN Paper Knife is a taglicarte whose outline is faithfully derived from one of the most iconic knives of our production, the Col Moschin model, adopted by the 9th Parachute Assault Regiment "Col Moschin."

This instrument is part of a larger collection.

COL MOSCHIN Paper Knife is not only a decorative and evocative accessory, but it also has all the tactical features that are part of Extrema Ratio's DNA.

It features nylon grips and a sturdy steel blade that echoes the same shape as its big brother.

COL MOSCHIN Paper Knife is very practical and convenient for the office or home office and is also perfectly suited as an original gift idea.

Intended Use: Collection/Tactical/Military

Country of manufacture: Italy
Blade: stainless steel NOT SHARPENED
Blade Finish: Burnishing MIL-C-13924
Handle: nylon
Blade length: 100mm.
Blade thickness: 1.5mm.
Total length: 180mm.
Weight: 45g.
Sheath: -
Packaging: cardboard box with Extrema Ratio logos.
Notes: -

The Fallkniven H1 knife is a very handy knife with impressive strength. The H1 is our first true hunting knife and encapsulates the history of Nordic Scandinavian cutlery art. Because of this heritage, the H1 does not have a standard finger guard, but grip security is improved by the ergonomic thermorun plastic handle.

The special design of the H1 blade is used to work game while hunting. The H1 knife may look different, but it works very well. In many ways, the performance of a knife depends on the person holding it. Knowing where and how to properly carve game goes beyond the knife. Hunters must avoid wrong cuts, keep hair off the meat, avoid cutting organs, and minimize blood flowing onto the game and the hunter. The combination of an experienced hunter and a well-designed knife is unbeatable!

Intended use: hunting

Type of production: Industrial
Country of manufacture: Sweden
Blade: Elmax SuperClean stainless steel at 61/62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Balance: backward
Weight: 175g.
Sheath: made of Zytel
Packaging: white cardboard case with Fallkniven logos
Notes: -

Explore the power of modernity and boldness with the OXYLOS FX-616 OL knife. Embodying the quintessence of contemporary pugnacity and aggressive design, this tool is more than just a bushcraft knife: it is an icon of innovation. With a BECUT stainless steel blade that promises durability and strength, combined with a sought-after satin finish for an elegant finish, the OXYLOS is ready to take on any challenge.

The olive wood handle offers a secure and comfortable grip, while stainless steel screws ensure strength and durability. Complete with a leather sheath for safe and stylish carrying, the OXYLOS is ready to be the ideal companion for outdoor adventurers.

Masterfully crafted in Italy, the OXYLOS is more than just a knife: it is an experience, a symbol of exceptional performance and timeless style.

Intended Use: Hunting / Hiking / Bushcraft / Utility

Type of production: Industrial
Country of manufacture: Italy
Blade: full tang in Becut 56/58HRC stainless steel
Blade treatment: Satin finish
Handle: Olive wood
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 240mm.
Balance: On the guard branch
Weight: 270g.
Sheath: leather, belt, ambidextrous, for horizontal or vertical carry
Packaging: cardboard box with Fox logos
Notes: -

Explore the power of modernity and boldness with the OXYLOS FX-616 MB knife. Embodying the quintessence of contemporary combativeness and aggressive design, this tool is more than just a bushcraft knife: it is an icon of innovation. With a BECUT stainless steel blade that promises durability and strength, combined with a stone washed surface treatment for a rugged finish, the OXYLOS is ready to take on any challenge.

The black micarta handle offers a secure and comfortable grip, while stainless steel screws ensure strength and durability. Complete with a leather sheath for safe and stylish carrying, the OXYLOS is ready to be the ideal companion for outdoor adventurers.

Masterfully crafted in Italy, the OXYLOS is more than just a knife: it is an experience, a symbol of exceptional performance and timeless style.

Intended Use: Hiking / Bushcraft / Utility

Type of production: Industrial
Country of manufacture: Italy
Blade: full tang in Becut 56/58HRC stainless steel
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 240mm.
Balance: On the guard branch
Weight: 273g.
Sheath: leather, belt, ambidextrous, for horizontal or vertical carry
Packaging: cardboard box with Fox logos
Notes: -

In this new edition of the Defender FX-689, we have focused our attention on the blade, introducing an extraordinary 5 mm thick N690Co blade, which gives it particularly high strength. The handle features deep transverse grooves for an extremely secure grip.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: Black Top Shield
Handle: FRN (Fiberglass Reinforced Nylon) with Black Top Shield steel guard and pommel
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 320mm.
Weight: 360g.
Sheath: made of Kydex, with M.O.L.L.E. compatible loops.
Packaging: cardboard box with Fox logos
Notes: -

From field work to food preparation in the outdoor field kitchen, the 15505 Meatcrafter 4" derives from its full-size counterpart in terms of handle ergonomics and hybrid fixed blade profile, but offers a slightly smaller blade for even finer, more precise and detailed work.

The CPM-154 premium stainless steel blade with 14° SelectEdge is designed specifically for working with smaller animals such as game and poultry, with the perfect amount of blade for delicate cuts around the sternum.

With a Dark Olive Santoprene handle for a secure grip even in wet environments, the Meatcrafter 4" is a no-holds-barred cutting tool for the most experienced hunter.

Intended Use: Hunting / Meat Knife

Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-154 58/61HRC
Blade finish: Stonewashed
Handle: Santoprene
Blade length: 102mm.
Blade thickness: 2.3mm.
Total length: 225mm.
Weight: 76.8g.
Sheath: Two-tone boltaron (one side black, one side orange)
Packaging: cardboard box with Benchmade logos
Notes: smaller and more compact version of the Meatcrafter modelo

Survival in the wilderness can depend on the tools you carry, and the 165-1 Mini Bushcrafter is a compact take on the classic outdoor bushcrafting knife, the most important tool in your kit.

With an 8.5cm. fixed blade made of premium CPM-S30V sintered stainless steel and an all-weather durable G10 OD Green handle with a highly visible red G10 spacer, the 165-1 Mini Bushcrafter is purpose-built for all of the toughest outdoor tasks, including fire bait preparation, batoning, shelter construction, and food preparation.

Redesigned with updated blade geometry and handle ergonomics to the demands of modern users, it can be kept handy in the leather sheath to be worn on the belt, which also features a special recess for carrying a firestarter.

Intended Use: Utility / Hiking

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC sintered stainless steel
Blade finish: Stonewash
Handle: G10
Blade length: 85mm.
Blade thickness: 4.2mm.
Total length: 192mm.
Weight: 183g.
Sheath: leather, with belt loop for vertical carry
Packaging: cardboard box with Benchmade logos
Notes: Design by Shane Sibert

Survival in the wilderness can depend on the tools you carry, and the 163-1 Bushcrafter is a reimagining of the classic outdoor bushcrafting knife, the most important tool in your kit.

With a fixed 11-cm. blade of premium CPM-S30V sintered stainless steel and an all-weather durable G10 OD Green handle with a highly visible red G10 spacer, the 163-1 Bushcrafter is purpose-built for all of the toughest outdoor tasks, including fire bait preparation, batoning, shelter construction, and food preparation.

Redesigned with updated blade geometry and handle ergonomics to the demands of modern users, it can be kept handy in the leather sheath to be worn on the belt, which also features a special recess for carrying a firestarter.

Intended Use: Utility / Hiking

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC sintered stainless steel
Blade finish: Stonewash
Handle: G10
Blade length: 111mm.
Blade thickness: 4.2mm.
Total length: 229mm.
Weight: 218g.
Sheath: leather, with belt loop for vertical carry
Packaging: cardboard box with Benchmade logos
Notes: Design by Shane Sibert

The Ranger Puukko is a versatile knife ideal for international special units and civilian use such as bushcraft, hunting and camping.

Made with precision and high-quality materials, it offers a secure grip, a sharp blade and a practical sheath. No frills, it ensures safety and consistent performance in all seasons and circumstances. The EasyLock composite sheath allows for safe and quiet carrying.

It synthesizes the traditional Puukko with the ruggedness of a military knife, symbolizing perseverance and the pursuit of perfection. The Ranger Puukko is a reliable companion in any environment, embodying the resilience and functionality of Nordic knives.

Intended Use: Hiking / Hunting / Bushcraft

Type of production: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 59HRC
Blade treatment: Teflon coated PTFE
Handle: TPV (vulcanized thermoplastic)
Blade length: 150mm.
Blade thickness: 4.25mm.
Total length: 273mm.
Weight: 198g.
Sheath: composite material
Packaging: cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka Peltonen

The Ranger Puukko is a versatile knife ideal for international special units and civilian use such as bushcraft, hunting and camping.

Made with precision and high-quality materials, it offers a secure grip, a sharp blade and a practical sheath. No frills, it ensures safety and consistent performance in all seasons and circumstances. The EasyLock composite sheath allows for safe and quiet carrying.

It synthesizes the traditional Puukko with the ruggedness of a military knife, symbolizing perseverance and the pursuit of perfection. The Ranger Puukko is a reliable companion in any environment, embodying the resilience and functionality of Nordic knives.

Intended Use: Hiking / Hunting / Bushcraft

Type of production: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 59HRC
Blade treatment: Dual Tone, partially treated with Black Cerakote coating
Handle: TPV (vulcanized thermoplastic)
Blade length: 150mm.
Blade thickness: 4.25mm.
Total length: 273mm.
Weight: 198g.
Sheath: composite material
Packaging: cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka Peltonen

The Ranger Puukko is a versatile knife ideal for international special units and civilian use such as bushcraft, hunting and camping.

Made with precision and high-quality materials, it offers a secure grip, a sharp blade and a practical sheath. No frills, it ensures safety and consistent performance in all seasons and circumstances. EasyLock composite scabbard allows for safe and quiet carrying.

It synthesizes the traditional Puukko with the ruggedness of a military knife, symbolizing perseverance and the pursuit of perfection. The Ranger Puukko is a reliable companion in any environment, embodying the resilience and functionality of Nordic knives.

Intended Use: Hiking / Hunting / Bushcraft

Type of production: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 59HRC
Blade treatment: Black Cerakote
Handle: TPV (vulcanized thermoplastic)
Blade length: 150mm.
Blade thickness: 4.25mm.
Total length: 273mm.
Weight: 198g.
Sheath: composite material
Packaging: cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka Peltonen

The M23 Ranger Cub knife features a 6.5-centimeter carbon steel blade with an induction-hardened edge at 62 HRC. Remember that carbon steel always requires some care, so keep the blade clean and wash and dry it after each use. You can also apply a little oil to the blade from time to time. With proper care, corrosion is kept at bay and the blade remains intact.

The handle material is TPV, thermoplastic vulcanized, a type of rubber-like plastic material that resists wear, impact, chemicals and temperature changes almost indefinitely. The secure grip remains firm even in wet conditions.

Thanks to the Kydex sheath, the knife can be easily carried on the belt in a horizontal position.

Intended Use: Hiking / Hunting / Bushcraft

Production type: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 62HRC
Blade treatment: Dual Tone
Handle: TPV (vulcanized thermoplastic)
Blade length: 65mm.
Blade thickness: 3.3mm.
Total length: 165mm.
Weight: 78g.
Sheath: Kydex
Packaging: Cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka Peltonen

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition, aesthetically marked by some oxidation marks on the blade, guard and pommel; the scabbard leather is also somewhat marked
* Commercially available: Currently in production
* Sharpening: Factory.
* Marks on blade: various oxidation marks.
* Marks on handle: None
* Box: Present and complete with accessories.
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Hunting / Outdoor

Production Type: Industrial
Country of Production: Taiwan
Blade: Made of 1095 carbon steel at 58/59HRC
Blade Treatment: mirror polish
Handle: brass and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Scabbard: Black leather
Packaging: cardboard box with Down Under logos, sharpening steel
Notes: the Outback is a clear homage to the knife used by Paul Hogan in the Mr. Crocodile Dundee movies, in fact it faithfully traces its shape and dimensions. - Eclipse version in carbon steel (it is recommended to keep it oiled and stored outside the leather sheath) - Previously purchased knife, from a private collection

Official reproduction, made under film license by Hollywood Collectibles, of the knife used in the film "Rambo III". This model features a signature on the blade of John Rambo and is a limited edition.

Intended use: Survival/Collection

Blade: 420J2 stainless steel
Country of production China
Handle: in wood, with stainless steel guard and knob
Blade length: 320mm.
Blade thickness: 5.5mm.
Total length: 455mm.
Balancing: advanced
Weight: 922g.
Sheath: leather
Notes: Official reproduction under cinematographic license
Limited Edition: blade and scabbard signed "John Rambo", limited and numbered edition made in 10,000 copies

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In good condition
* Commercially available: YES
* Sharpening: re-sharpened by our in-house laboratory
* Marks on blade: YES,  has a number of scratches on the blade
* Marks on handle: None
* Box: Present and complete
* Sheath: Leather sheath
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our internal laboratory

Intended use: hunting/hiking

Type of production: semi-artisanal
Blade: 12C27 stainless steel
Handle: Birch
Blade length: 102mm.
Blade thickness: 3mm.
Total length: 221mm.
Balancing: set back 2.5cm
Weight: 151g.
Sheath: leather
Notes: Design by Jesper Voxnaes

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Full set, NOS (new old stock / stock fund).
* Condition: Brand new, never taken out of wooden box.
* Commercially available: Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Iconic knife produced by Puma and dating back to the late 1980s, featuring a then very modern line and a steel that was very advanced for the time (154CM). 

Intended Use: Collection / Vintage / Tactical

Type of production: Semi-industrial
Country of Production: Germany
Blade: Stainless steel 154CM
Blade finish: Satin finish
Handle: integral, stainless steel and Brazilian Jacaranda wood
Blade length: 165mm.
Blade thickness: 5.5mm.
Total length: 290mm.
Balance: backward
Weight: 320g.
Sheath: leather
Packaging: wooden case
Notes: 1980s Vintage knife - NOS (new old stock) - Brand new

Intended Use: Excursionism / Heavy Duty

Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC
Blade Finish: Dual Tone, Black & Satin
Handle: Micarta
Blade Length: 140mm.
Blade thickness: 6.3mm.
Total Length: 255mm.
Balance: advanced
Weight: 425g.
Sheath: leather, handcrafted
Packaging: certificate of guarantee and authenticity
Notes: Each knife is unique and handcrafted in every part

Use: Heavy Duty / Collection

Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Ice Brush
Handle: Micarta
Blade Length: 237mm.
Blade thickness: 6.5mm.
Total length: 390mm.
Balance: backward
Weight: 690g.
Sheath: leather
Packaging: certificate of guarantee and authenticity
Notes: special edition, with bowie-style blade

Use: EDC / Light Utility / All Round

Type of production: Handmade
Country of Production: Italy
Blade: integral, D2 steel at 59/61HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 205mm.
Balance: backward
Weight: 214g.
Sheath: made of Kydex, thermoformed, with tek-lok type attachment
Packaging: certificate of guarantee and authenticity
Notes: Each knife is unique and handcrafted

The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While retaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency. 

Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.

Intended use: Neck knife / Utility

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: Dark Stone Washed
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)

The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While maintaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency. 

Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.

Intended use: Neck knife / Utility

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: satin finish
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife from the 1990s, previously purchased.
* Condition: In very good condition
* Commercially available: discontinued
* Sharpening: Factory sharpened
* Marks on blade: Small marks given by time.
* Marks on handle: None
* Box: -
* Scabbard: Present, but presumably not original although fully compatible.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8A
Blade Finish: Satin finish
Handle: Kraton
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 263mm.
Balance: advanced
Weight: 225g.
Scabbard: brown leather, belt-mounted, presumably not original but fully compatible
Packaging: -
Notes: previously purchased knife, from private collection

Intended Use: Multirole / Utility

Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC
Blade finish: Raw, with compound type sharpening
Handle: Micarta
Blade length: 150mm.
Blade thickness: 5mm.
Total length: 295mm.
Balance: advanced
Weight: 395g.
Sheath: thermoformed Kydex with multi-position belt loop, MOLLE compatible
Packaging: polypropylene case with Wander Tactical logos and certificate of authenticity signed and dated
Notes: Particular unique specimen with compound type sharpening

Spectacular one-of-a-kind, specially made for Coltelleria Collini, reminiscent of primitive knives made of obsidian. The blade is masterfully handcrafted faceted and the handle is made of hand woven leather and leather.

The scabbard is made of thermoformed kydex to which soft, fine brown greased leather has been applied externally.

It is completed by the beautiful, entirely handcrafted wooden box with engraved Wander Tactical logos and runes, with the inner part that holds the knife made of handcrafted leather.

Intended Use: Collection

Type of production: Handcrafted - one-of-a-kind
Country of production: Italy
Blade: ** unsharpened ** made of D2 steel at 59/60HRC
Blade treatment: primitive, reminiscent of prehistoric obsidian knives
Handle: leather and leather
Blade length: 150mm.
Blade thickness: 4mm.
Total length: 265mm.
Balance: backward
Weight: 166g.
Scabbard: kydex, with handcrafted leather outer cover
Packaging: antiqued wooden box, with engraved logos and runes and handcrafted leather interior 
Notes: unsharpened knife

We are proud to present a true gem in the world of knives: the exclusive Wander Tactical model, Mistral XL. This extraordinary edition is distinguished by its elegance and refinement, with a Raw Finish blade treatment that captures the essence of craftsmanship, coupled with a G10 desert handle, which not only offers a high-end aesthetic but also ensures a solid and comfortable grip.

This production is extremely limited and unique, made in only 4 separate pieces, making each one a collector's item with collector's value. The knife we present here is number 3 in this exclusive series, as confirmed by the certificate of authenticity.

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/61HRC
Blade Finish: Raw
Handle: G10 Desert
Blade length: 160mm.
Blade thickness: 5mm.
Total length: 310mm.
Balance: set back about 2cm. from the guard branch
Weight: 419g.
Sheath: made of Kydex, thermoformed, with MOLLE-compatible belt loop
Packaging: accompanied by polypropylene case 
Notes: limited series of four pieces different from each other, specimen #3 of #4

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased 
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in excellent condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.

Designed specifically for the seven Mercury Program astronauts, the Model 17 accompanied these pioneers on the United States' first manned space flights. Astronaut Gordon Cooper contributed to the final design of this knife, making it not only a survival tool, but also a piece of history. Two examples of this knife, rich in historical value, are currently on display at the Smithsonian Institution.

Intended use: utility/military

Type of production: handcrafted
Country of manufacture: USA
Blade: 440B stainless steel
Blade finish: satin-finished
Handle: micarta, brass and duralumin
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 256mm.
Balance: on the guard branch
Weight: 252g.
Sheath: Black Leather
Notes: previously purchased knife, withdrawn from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / All round utility

Blade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather case

This year's colors come from the 17th century Mora folk dress, one of Sweden's oldest folk dresses. Here the green fabric meets the classic Dala Red color typical of our knives. Together, they breathe new life into the color combination that once made the people of Mora famous all over the world.

Mora folk dress is still worn by people on special occasions, such as midsummer, weddings or folk music events. Over the years, the dress has undergone few changes and has remained largely the same as it always has. The Mora folk dress and the Morakniv are both worn with pride, in keeping with the tradition established by the ancestors and the heritage that has been developed and cultivated over the years.

The knife, with its ergonomic barrel-shaped polymer handle, features a sturdy finger guard and a 2.0 mm-thick carbon steel blade that provides strength and stability with every cut. 

Intended use: hiking / hunting / sports

Type of production: industrial
Blade: 12C27 recycled Swedish stainless steel
Country of manufacture: Sweden
Handle: thermoplastic
Blade length: 91mm.
Blade thickness: 2mm.
Total length: 206mm.
Weight: 109g.
Scabbard: plastic material
Notes: exclusive, limited edition coloring for the year 2024

This year's colors come from the 17th century Mora folk dress, one of Sweden's oldest folk dresses. Here the green fabric meets the classic Dala Red color typical of our knives. Together, they breathe new life into the color combination that once made the people of Mora famous all over the world.

Mora folk dress is still worn by people on special occasions, such as midsummer, weddings or folk music events. Over the years, the dress has undergone few changes and has remained largely the same as it always has. The Mora folk dress and the Morakniv are both worn with pride, in keeping with the tradition established by the ancestors and the heritage that has been developed and cultivated over the years.

The knife, with its ergonomic barrel-shaped polymer handle, features a sturdy finger guard and a 2.0 mm-thick carbon steel blade that provides strength and stability with every cut. 

Intended use: hiking / hunting / sports

Type of production: industrial
Blade: carbon steel C100
Country of manufacture: Sweden
Handle: thermoplastic
Blade length: 91mm.
Blade thickness: 2mm.
Total length: 206mm.
Weight: 109g.
Scabbard: plastic material
Notes: exclusive, limited edition coloring for the year 2024

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratory

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratory

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel N690Co hardened to 59/60 HRC
Blade finish: satin finish
Handle: Snakewood - 416 stainless steel guard and pommel
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 240mm.
Weight: 185g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from a private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.

When your field adventures transition to the kitchen, the right cutting tool can make all the difference!

The new 15500 Meatcrafter™️ is a fixed hybrid hunting knife with a blade design ideal for cutting, boning or slicing your favorite cuts of meat. Featuring Benchmade's new SelectEdge™ technology, the 28° sharpening angle of the CPM-154 stainless steel blade provides the perfect balance of penetration, strength, edge retention and blade flexibility. Ideal to take with you on your hunting trips, but also a reliable companion in the kitchen or during the most demanding barbecues!

Intended Use: Hunting / Meat Knife

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-154 58/61HRC stainless steel
Blade finish: Stonewashed
Handle: Santoprene
Blade length: 154mm.
Blade thickness: 2.3mm.
Total length: 281mm.
Weight: 91.8g.
Sheath: Boltaron
Packaging: Cardboard box with Benchmade logos
Notes: -

Intended use: Tactical / Multirole

Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw
Handle: Micarta
Blade length: 110mm
Blade thickness: 5mm
Total length: 250mm
Balance: Rearward
Weight: 295g
Sheath: Thermoformed Kydex
Packaging: Certificate of warranty and authenticity
Note: Knife entirely handcrafted

The Zeitgeist is the sum total of those visions that are born in the present, shape an entire era, and are long gone by the creative minds that generated them. As a specialist in tactical and outdoor knives, Hungarian free spirit and knife maker Kornel Kiss regularly dares to look beyond the tip of his nose and, in the Boker Plus Makri, combines the elements of a practical EDC knife with the advantages of a Kukri blade, whose historical origins go back to Nepal.

Intended Use: Utility

Production Type: Industrial
Country of manufacture: China
Blade: ful tang in D2 steel
Blade finish: Blacwashed
Handle: G10
Blade length: 71mm.
Blade thickness: 3mm.
Total length: 159mm.
Weight: 94g.
Sheath: made of Kydex, with Tek-Lok type attachment
Packaging: cardboard box with Boker Plus logos
Notes: Design by Kornel Kiss

Type of Production: Handcrafted
Blade Production: Italy
Blade: Apex Ultra steel at 63HRC
Blade Finish: Stone Washed
Handle: Ironwood, G10, and carbon pins
Blade Length: 90mm
Blade Thickness: 4.8mm
Total Length: 204mm
Balance: Set back 3cm from the guard branch
Weight: 179g
Sheath: Hand-stitched and crafted leather
Notes: unique knife handcrafted for Coltelleria Collini of Busto Arsizio - No. 310

Type of Production: Handcrafted
Blade Production: Italy
Blade: Apex Ultra steel at 63HRC
Blade Finish: Stone Washed
Handle: Stabilized Birch, G10, and carbon pins
Blade Length: 90mm
Blade Thickness: 4.8mm
Total Length: 204mm
Balance: shifted 3cm back from the guard branch
Weight: 179g
Sheath: hand-stitched and crafted leather
Packaging and Certificate: Cordura case and authenticity certificate
Notes: unique knife handcrafted for Coltelleria Collini of Busto Arsizio - No. 309

Intended Use: Utility

Production type: Industrial
Country of Production: Germany - Solingen
Blade: ful tang 80CrV2 steel
Blade finish: Stone Washed
Handle: TPE
Blade length: 89mm.
Blade thickness: 3.5mm.
Total length: 210mm.
Weight: 137g.
Sheath: kydex
Packaging: cardboard box with Boker Germany logos
Notes: -

Usage: Sports
Type of Production: Industrial
Country of Production: Italy
Blade: Full tang in N690Co stainless steel
Blade Treatment: Black Hydroglider
Handle: Multicolor G10
Blade Length: 110mm
Blade Thickness: 4mm
Total Length: 220mm
Balance: -
Weight: 160g
Sheath: Kydex
Packaging: Cardboard box with Fox logos
Notes: Design by Jesper Voxnaes

Intended Use: Tactical / Sporting

Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market only

Type of production: Artisan

Blade production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Iron Washed
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balancing: advanced
Weight: 466g.
Sheath: kydex
Packaging: -
Notes: Each knife is unique and handcrafted

Extrema Ratio Misericordia Ranger XXV Anniversarium Limited Edition is a limited series version of only 400 pieces that preserves intact all the features of the famous Misericordia model adopted by the 4th Alpine Parachute Regiment.

Misericordia Ranger XXV Anniversarium Limited Edition comes with 2 sheaths, both in desert color: the first, produced in kydex, offers the possibility of attachment via belt-clip, ulti-clip and malice-clip (optional accessories not included with the product). Attachment to the M.O.L.L.E. system by braiding the paracord is also possible. The second, made of high-strength Nylon, has 2 adjustable loops that allow it to be attached to M.O.L.L.E. systems.


Intended Use: Tactical/Multi-role

Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Geotech Camo (Black Warfare)
Handle: FRN (fiberglass reinforced Nylon) with skull crasher / rear glass breaker
Blade length: 118mm.
Blade thickness: 4mm.
Total length: 233mm.
Weight: 87g.
Sheath: double sheath: Kydex and ABS.
Packaging: polypropylene case with Misericordia / Extrema Ratio logos and commemorative Coin
Notes: Limited edition of only 400 pieces, numbered on box and blade to celebrate the company's 25th anniversary

Mini-Trapper is a fixed-blade outdoor knife that, thanks to its small size, can be carried comfortably in your pocket while hiking.

Made of Elmax steel with a hardness of 61 HRC, it is extremely durable and suitable for all uses, including hunting to process small prey. The groove on the back of the blade acts as a thumb gripper allowing the knife to be guided safely.

Mini-Trapper has a one-piece construction into which deer antler insignia are attached by steel screws.


Intended Use: Hunting / Hiking

Production type: Industrial
Country of manufacture: Italy
Blade: full tang in Elmax 61HRC steel
Blade treatment: Stonewashed
Handle: deer antler
Blade length: 65mm.
Blade thickness: 4mm.
Total length: 120mm.
Weight: 76g.
Sheath: leather
Packaging: cardboard box with Maserin logos
Notes: -

A pocket-sized and compact EDC knife featuring an M390 steel blade with a satin finish and a SOLID® (one-piece) handle with titanium ferrule.

The SOLID® handle is available in several variants, and its ergonomic shape fits the palm of the hand perfectly, allowing for very precise handling.

Type of use: hiking / hunting / light utility

Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: Full tang, stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Green Micarta and Titanium
Blade length: 65mm.
Blade thickness: 3.8mm.
Total length: 150mm.
Balance: central
Weight: 57g. (99g. scabbard included)
Sheath: leather, belt, with vertical port
Packaging: cardboard box with Lion Steel logos
Notes: design by the well-known knife-maker Gianluigi "Wilson" Simonella, a lifelong maker of custom knives, as well as a craftsman of material and a founding member of the Corporazione Italiana Coltellinai (CIC)

Intended use: Tactical / EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Full tang in AUS-8 57/59HRC stainless steel
Blade finish: Powder coated
Handle: Zytel
Blade length: 80mm.
Blade thickness: 3.7mm.
Total length: 197mm.
Weight: 117g. (172g. with sheath)
Sheath: ABS with clip
Notes: -

Intended Use: Bushcraft / Outdoor

Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Coltelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: full tang in D2 steel
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 203mm.
Weight: 210g.
Sheath: made of Kydex, with Tek-Lok type attachment
Packaging: cardboard box with Viper logos
Notes: design by Tommaso Rumici

In Norse mythology, Andhrimnir tirelessly took care of the physical well-being of the gods and the honorably fallen heroes, who thoroughly enjoyed their existence in the carefree warriors' paradise, Valhalla.

For this purpose, he slaughtered the beast Sæhrimnir day after day, which was then resurrected at night to be eaten again the following day. A fleeting glance at Midgard (the Norse term for earth/world) would have elevated the chef's status even further in the eyes of the gods. This is because the knife craftsman Dirk Hofmeister knows like no other how to create mythical blades infused with Norse magic.

The Andhrimnir Mini bears the unmistakable hallmarks of Midgard's full tang constructed knives, with a 6mm thick Wharncliffe blade made of D2 in a two-tone finish with grooves on both sides and jimpings to ensure optimal functionality and maximum stability for all daily cutting tasks. The ergonomic and milled handles* made of G10 allow for comfortable and effortless work.

The custom-fitted Kydex sheath with a full-sized belt adapter, as well as a lanyard hole, harmoniously round off the package and revive the spirit of the Vikings in the fixed blade knife. * Other handles in a wide range of shapes and colors can be directly downloaded from us as a file for the home 3D printer or custom-made by Midgards Messer.

Intended use: Utility

Type of production: Industrial
Country of production: China
Blade: full tang in D2 steel
Blade finish: Dual tone (Satin + Black)
Handle: G10
Blade length: 85mm.
Blade thickness: 6mm.
Total length: 150mm.
Weight: 182g.
Sheath: In Kydex, with attachment
Packaging: Cardboard box with Boker Plus logos
Notes: Design by Midgards Messer

Intended use: Light Utility/Hunting

Type of production: Industrial
Blade Production: Italy
Blade: Full Tang in N690Co stainless steel
Blade Treatment: Stonewash
Handle: Brown Micarta
Blade Length: 115mm.
Blade Thickness: 5mm.
Closed Length: -
Total Length: 250mm.
Thickness when closed: -
Balance: set back by 3cm
Weight: 245g.
Closure: -
Clip: -
Sheath: brown leather
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

The Flyway has proven to be the ultimate fixed blade for offshore game and waterfowl. The 15700-01 offers the ultimate in edge retention thanks to CPM-S90V steel, which will keep you in the field well into the season. To change things up even further, the ergonomic handle now includes OD green G10 gauntlets with orange rings for visibility, while the orange Boltaron sheath is perfect for attaching to a chest rig or stuffing into a backpack.

Intended Use: Hunting/Light Utility

Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S90V stainless steel (59/61HRC)
Blade finish: Satin finish
Handle: G10
Blade length: 68mm.
Blade thickness: 2.3mm.
Total length: 177mm.
Weight: 58.5g.
Sheath: Boltaron
Packaging: Cardboard box with Benchmade logos
Notes: -

Built on a solid foundation, the revamped 15201OR Altitude takes ultralight hunting gear to new levels. Incorporating feedback from our fans, this minimalist fixed blade features full-length carbon fiber sheaths for better blade control in CPM-S90V. This less than 50-gram machining tool earns its place at your side with a balance of corrosion resistance, strength, and edge retention.


Intended Use: Hunting

Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-S90V (59/61HRC)
Blade treatment: Cerakote
Handle: stainless steel CPM-S90V with carbon fiber grips
Blade length: 78mm.
Blade thickness: 2.3mm.
Total length: 175mm.
Weight: 47g.
Sheath: made of Boltaron, for neck or compatible with M.O.L.L.E. type attachments.
Packaging: cardboard box with Benchmade logos
Notes: -

On December 9, 1942, during the Second World War, KA-BAR presented a knife to the United States Marine Corps hoping it would become the standard weapon. In collaboration with the Marine Supply Department, the project was revised, and production began on an improved combat and utility knife.

During the war, USMC KA-BAR knives gained such recognition for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, and the wars in Iraq and Afghanistan.

In 2019, KA-Bar partnered with Spartan Blades to form Pineland Cutlery. CEO John Stitt aimed to create a "KA-BAR" with improved strength, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.

CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries and specifically designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: ZrN Flat Dark Earth
Handle: Kraton G with stainless steel 301 guard and tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Black leather
Packaging: Cardboard box with Spartan Blades logos
Notes: Please note that the Flat Dark Earth (FDE) coated blade, when inserted or removed from the leather sheath, may show streaks or stains due to the dye used for the sheath. The blade can be cleaned with petroleum or acetone, re-oiled (e.g., with WD40 or light mechanical oil), and dried with a clean cloth to restore the original coating finish.

Produced in Olean, NY, in collaboration with the skilled people at KA-BAR knives, the Spartan-Harsey Fighter is born from the partnership between William W. Harsey Jr. and Spartan Blades. The intention behind this knife was to combine the blade of a US military combat/utility knife with the contoured handle that has become a hallmark of Mr. Harsey's designs. This knife is a no-nonsense combat blade.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: 1095 carbon steel 56/58HRC
Blade Finish: Black Powder Coating
Handle: Injection-molded Thermoplastic
Blade Length: 155mm
Blade Thickness: 4.9mm
Overall Length: 292mm
Weight: 334g
Sheath: Thermoplastic, with belt attachment and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by William W. Harsey Jr. - The Professional Grade series with Silver packaging identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience to keep prices affordable for the public without sacrificing USA-made production.

Machai - A fitting name for this large cutting tool. In Greek mythology, the Machai were the demons (spirits) of battle and combat.

The high weight and recurved profile of this flat ground blade make it an excellent hatchet. The Machai has a full-tang construction and a handle that ensures a forward balance in the user's hand.

The textured Micarta canvas ergonomic handle ensures a secure and comfortable grip, whether wet or dry. Made by the good people at KA-BAR Knives; in Olean, NY, USA.

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: in 1095 carbon steel 56/58HRC
Blade finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade length: 165mm.
Blade thickness: 4.8mm.
Total length: 295mm.
Weight: 308g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E compatible belt attachments and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by Iovito - The Professional Grade series with a Silver-colored box identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with the production experience of Ka-Bar to keep public prices affordable without having to give up a made in USA production.

For the big game hunter who tracks their prey through the woods, every gram counts. Try the brand new 15600-01, an ultra-lightweight fixed blade knife designed to process large animals.

Building on the ergonomics of the 15600 model, the 15600-01 features an OD Green G10 handle that fits well in the hand and a reliable CPM-S30V stainless steel.

Intended use: Hunting / Light Utility

Type of production: Industrial
Country of production: USA
Blade: in CPM-S30V stainless steel (58-60)
Blade finish: Satin
Handle: G10 Green
Blade length: 116mm.
Blade thickness: 2.3mm.
Total length: 2.28mm.
Weight: 45g.
Sheath: kydex
Packaging: Cardboard box with Benchmade logos
Notes: -

Intended Use: Tactical / Military 

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Black Idroglider
Handle: G10
Blade length: 78mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 97g.
Sheath: kydex, with double Ulti-Clip attachment system
Packaging: cardboard box with Fox logos
Notes: Design by Doug Marcaida

Intended use: Utility / Tactical / Outdoor

Type of production: Industrial
Country of production: Italy
Blade: Niolox 59/61HRC stainless steel with Black Idroglider finish
Handle: Bison Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balancing: advanced by 1cm
Weight: 235g.
Sheath: leather
Packaging: cardboard box with Fox logos
Note: -

The Boker Plus Accomplice by John Gray is a very compact and handy EDC or reserve knife, which with its slim handle and the typical karambit ring at the end of the handle combines a high level of user comfort with the discretion of an excellent hand position. It can also be carried as a large neck knife. The G10 handles feature a textured groove and are fully contoured, so that the Accomplice virtually nestles in the hand. The blade is made of D2 and features a satin finish. Comes with customised Kydex sheath and large belt adapter.

Intended use: Tactical / EDC

Production type: Industrial
Country of manufacture: China
Blade: Full tang, D2 steel
Blade finish: Satin finish
Handle: G10
Blade length: 82mm.
Blade thickness: 4.1mm.
Total length: 111mm.
Weight: 111g.
Sheath: in kydex, with Tek-Lok type multi-position attachment
Packaging: Cardboard box with Boker Plus logos
Notes: Design by John Gray

COL MOSCHIN Paper Knife is a paper knife whose shape is faithfully derived from one of the most iconic knives of our production, the Col Moschin model, adopted by the 9th Parachute Assault Regiment "Col Moschin".

This tool is part of a larger collection.

COL MOSCHIN Paper Knife is not only a decorative and evocative accessory, but also has all the tactical characteristics that are typical of Extrema Ratio's DNA.

It is equipped with nylon grips and a sturdy steel blade that takes up the same shape as its older brother.

COL MOSCHIN Paper Knife is very practical and convenient for the office or home studio and is also perfect as an original gift idea.

Intended use: Collection/Tactical/Military

Country of production: Italy
Blade: NOT SHARP stainless steel
Blade Finish: MIL-C-13924 Bluing
Handle: nylon
Blade length: 100mm.
Blade thickness: 1.5mm.
Total length: 180mm.
Weight: 45g.
Scabbard: -
Packaging: Cardboard box with Extrema Ratio logos with hand-polished plexiglass base in BLACK color with engraved Extrema Ratio logo
Note:

The Harsey TT (Tactical Trout) is designed to be a very comfortable and sturdy medium-sized knife for most field tasks and defensive use. The size of the TT makes it easy to carry and handle.

The blade profile provides a clean cut with excellent tip strength. The full tang and handle of the Harsey TT provide neutral balance in the user's hand. The ergonomically shaped, linen Micarta handle provides a comfortable and secure grip when dry or wet. The pommel has a lanyard hole in the center of the angled tip. The TT is an excellent universal fixed blade, well balanced in size, function and feel. In our opinion, one of William Harsey's best designs.

After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.

Intended Use: Tactical/Military

Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade finish: ZrN Flat Dark Earth
Handle: Linen Micarta
Blade length: 114mm.
Blade thickness: 4.8mm.
Total length: 229mm.
Balance: on the guard branch
Weight: 209g.
Sheath: thermoformed in Kydex
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey