bing
News
Best news of March
Shop By
Shopping Options
Brand
  1. Spyderco 1item
  2. Approved 2items
  3. No Brand 1item
  4. Rockstead 2items
Less
Stock
  1. In Stock 1item
  2. Out of Stock 5items
Set Ascending Direction

6 Items

  1. William Henry - Signature Collection B12-FTD - Damascus ZDP-189 and Titanium - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Like new
    * Commercially available Out of production
    * Sharpening: Factory
    * Marks on blade: None
    * Marks on handle: some minor scuffs and hairlines on the right side
    * Box: Present
    * Scabbard: Present
    * Manuals, Certificates and Warranties: Present
    * Checked and Certified by our in-house laboratory

     

    Intended Use: Collection

    Production type: MidTech
    Country of manufacture: USA
    Blade: stainless rolled damascus with wave design, 45-ply and ZDP-189 cutting edge
    Blade finish: -
    Handle: titanium with blue anodized and topaz set
    Blade length: 79mm.
    Blade thickness: 2.3mm.
    Length closed: 100mm.
    Total length: 180mm.
    Weight: 57g.
    Closure: Button Lock with embedded topaz
    Sheath: leather, with stainless steel clip
    Packaging: cardboard box with William Henry logos and warranty certificate
    Notes: previously purchased knife, from a private collection

    WH-BF12-CP
    €1,057.38
    Only 1 left
    Only 1 left
  2. Rockstead - Shin - Clad ZDP189 & Aluminum and Samekawa - folding knife

    With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.

    Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.

    Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
    Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
    Blade length: 95 mm.
    Blade thickness: 4 mm.
    Overall length: 210 mm.
    Weight: 145 g.
    Lock: Liner Lock steel in 52HRC 402J2
    Clip: Steel 402J2 to 52HRC
    Notes: Accompanied by a certificate of guarantee with the technical specifications.

    RO-SHIN-ZDP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  3. Rockstead - CHI ZDP - Shinogi Zukuri Clad Steel SanMai ZDP189 - knife made in Japan

    Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.

    Intended Use: Collection/Sportsman

    Type of production: Midtech
    Country of manufacture: Sakai - Japan
    Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
    Blade treatment: mirror polish
    Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
    Blade length: 82mm.
    Blade thickness: 3.7mm.
    Length closed: 111mm.
    Total length: 189mm.
    Thickness when closed: 16.2mm.
    Weight: 133g.
    Opening: via ambidextrous pin
    Washers: steel
    Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
    Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
    Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
    Notes: Shinogi Zukuri type blade sharpening

    R-CHIZDP
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  4. Rockstead - Shin knife - ZDP189 in SanMai - PRIVATE COLLECTION - knife

    Retired from rivata collection - Rare Rockstead model produced in 2009 in SANMAI ZDP189 and ATS34 steel - the temper of this piece has reached a rare hardness of 67.4 hrc - Knife in like new condition.

    Checked and certified by our internal laboratory - Collini Cutlery.

    The best industrial knives currently in production are currently marketed under the Rockstead brand, of Ishida Co. of Sakai, Japan.

    Created by Katsumi Kitano, who has been producing quality knives for over 20 years so as to have been awarded the highest recognition among artisan cutlers in Japan, they prove to be exceptional both in cutting capacity, penetration and edge retention and in terms of innovation for materials used and for the construction techniques.

    Blade: SanMai ZDP189 and ATS-34 stainless steel at 67.4 HRC
    Handle: Same (real stingray leather) and aircraft aluminum with black alumite treatment at Hv400
    Blade length: 95 mm.
    Blade thickness: 4 mm.
    Total length: 210 mm.
    Weight: 145 g.
    Closure: Liner Lock in 402J2 steel at 52HRC
    Clip: 402J2 to 52HRC steel
    Notes: Accompanied by a guarantee certificate with technical specifications.

    RO-S-ZDP-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  5. Spyderco - Caly 3.5 Carbon Fiber ZDP - C144CFPE - knife

    Intended Use: sports / tactical

    Type of production: industrial
    Production Blade: Japan
    Blade: Stainless steel with rolled edge in ZDP-189 to 67HRC and cheeks external 420J2
    Treatment Lama: -
    Handle: Carbon Fiber
    Blade length: 86mm.
    Blade Thickness: 3mm.
    Closed Length: 108mm.
    Total length: 194mm.
    Balance: -
    Weight: 88g.
    Closure: Back Lock
    Clips: stainless steel, removable and reversible
    Sheath: -
    Notes: -

    SC144CFPE
    €299.18
    Only 0 left
    Only 0 left
    Out of stock
  6. Yuna Knives - EQ 2 Fibra di Carbonio - coltello artigianale

    Destinazione d'uso: Collezione/Sportivo

    Tipo di produzione: Artigianale
    Paese di produzione: Indonesia
    Lama: in acciaio laminato ZDP-189 e ATS-34
    Finitura lama: Satinatura
    Manicatura: Titanio 6AL4V e fibra di carbonio
    Lunghezza lama: 65mm.
    Spessore lama: 3mm.
    Lunghezza chiuso: 85mm.
    Lunghezza totale: 97mm.
    Spessore da chiuso: 11mm.
    Peso: 62g.
    Chiusura: Frame Lock
    Clip: Titanio 6AL4V
    Fodero: -
    Confezione: -
    Note: Realizzati interamente a mano da Yuna Knives

     

    9020
    €0.00
    Only -99 left
    Only -99 left
    Out of stock
Set Ascending Direction

6 Items





ecommerce sicuro