Fixed Blade Knives: sturdiness and versatility for every adventure

The Herring dagger is one of the most loved military knives by enthusiasts.

Its original name is Fairbairn Sykes or Commando Dagger and it was present in the endowment of the British Commandos.

A dagger that entered Italian history in World War II, thanks to the exploits of young soldiers of the 1st "Folgore" Reconnaissance Squadron, who were equipped with this weapon during Operation Herring. He has behind him a heroic piece of history that is rarely talked about, despite the fact that these young boys, thanks to their devotion to the cause and their courage, have written an important page in Italian history.

Extrema Ratio wanted to pay homage to this dagger trying to remain faithful to the original forms, while using the most modern production techniques.

The very special hand-made finish of the handle simulates the aging of brass and gives the dagger a dated look, similar to the original.

The dagger was developed in collaboration with the 185th RAO and adopted as a ceremonial commemorative dagger for the 20th anniversary of the regiment's establishment and the 75th anniversary of the Herring mission.

The knife is equipped with a polymer case with historical frieze of the F Squadron, leather / kydex sheath with brass tip and two commemorative scrolls.

PLEASE NOTE:
NE version, simulacrum replica with rounded tip and blunt blade, to allow free sale and possession according to the current regulations in force on the Italian territory.

We warn that any subsequent modifications and sharpening made to the blade modify the status of simulacrum of the Herring NE. In this case it will be subject to the regulations in force in the respective countries. Furthermore, these changes will void the Extrema Ratio warranty.

Intended use: Collection / Tactical

Type of production: Industrial
Country of production: Italy
Blade: not sharp, in stainless steel N690Co 58HRC
Blade treatment: Burnishing MIL-C-13924
Handle: Aged brass
Blade length: 167mm.
Blade thickness: 6.3mm.
Total length: 289mm.
Weight: 276g.
Sheath: leather, ABS and brass sheath
Packaging: Polymer case with historical frieze of Squadron F and 2 commemorative scrolls
Note: -

Model: Lightened version of the classic Fulcrum Bayonet, with shearder, stone washed blade, desert handle and desert nylon sheath.

Intended use: tactical / military / multi-role

Blade: full tang in stainless steel N690Co 58HRC
Handle: dismountable in Forprene
Blade length: 180mm.
Blade thickness: 6.3mm.
Length closed: -
Total length: 310mm.
Balancing: advanced, 1.5 cm from the lower guard branch
Weight: 378g.
Closure: -
Clip: -
Sheath: modular tactical with shear, thigh or belt, in Nylon and Kydex
Note: -

The Wander Tactical Lynx knife is an excellent option for anyone looking for a robust and reliable knife. The blade is made of D2 steel, which offers good resistance to wear and corrosion. The length of the blade is approximately 10cm and has a clip point shape, making it ideal for many outdoor activities.

The handle of the knife is made of micarta, a resistant and non-slip material that offers excellent grip even in humid or sweaty conditions. The length of the handle is approximately 12cm which gives a good balance to the knife, making it easy to handle and control.

The Lynx knife comes with a Kydex sheath, which protects and keeps it safe during transport. In addition, the cover can be easily attached to a belt or trousers thanks to its quick fastening system.

Overall, the Wander Tactical Lynx knife is an excellent choice for anyone looking for a reliable and durable knife for outdoor activities. With its sturdy blade, non-slip handle and Kydex sheath, the Lynx knife is a very attractive option for hikers, campers and outdoor enthusiasts.

Intended use: utility / bushcraft

Type of Production: Artisanal
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw Finish
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backwards
Weight: 260g.
Sheath: kydex
Packaging: -
Notes: Each knife is unique and handcrafted

Destinazione d'uso: Neck Knife

Tipo di produzione: Industriale
Paese di produzione: Maniago, Italia, by Fox Cutlery
Lama: acciaio inox N690Co
Trattamento lama: Black Cerakote
Impugnatura: acciaio inox N690Co
Lunghezza lama: 40mm.
Spessore lama: 3.8mm.
Lunghezza totale: 138mm.
Peso: 30g.
Fodero: Da collo, in Kydex, compatibile con sistemi di aggancio UltiClip (non compresi, acquistabili separatamente)
Confezione: Scatola di cartone con loghi Bastinelli Knives
Note: Prodotto in Italia da Fox Cutlery

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

The first and original Tanto "Made in Japan", here in a 1980's version with a San Mai steel blade, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto.

* Type: Previously Purchased
* Condition: very good, never used, some light surface marks (visible against the light)
* Commercially available Out of production
* Sharpening: Original wire
* Marks on blade: yes, superficial
* Marks on handle: no
* Box: no
* Scabbard: Present - Original, in good general condition, some marks present
* Manuals, Certificates and Warranties: no
* Checked and certified by our internal laboratory

Intended use: Collection

Type of production: Industrial
Country of manufacture: Japan
Blade: San Mai steel - Made in Japan
Blade treatment: satin finish
Handle: Kraton with brass guard and pommel
Blade length: 145m
Blade thickness: 4.7mm.
Total length: 285mm.
Balance: recessed
Weight: 268g.
Sheath: Black leather, branded "Japan".
Packaging: without original box
Notes: Knife from a private collection, first series, produced in the 1980s and out of production since the 1990s, overall in very good condition.

Knife withdrawn from private collection - Discontinued coloration - First series, with flat sheath - Overall in very good condition, with small marks on the blade due to insertion and removal of the knife from the sheath - Original factory sharpening in excellent condition, never used - Accompanied by original box and paper certificates and warranties - checked and certified by our in-house laboratory.

Intended Use: Tactical/Sporting

Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co
Finish: camouflage coating
Handle: Forprene
Blade length: 110mm.
Blade thickness: 6.3mm.
Total length: 210mm.
Balance: backward
Weight: 200g.
Sheath: rigid ABS with Tek-Lok attachment with automatic knife retention system.
Packaging: knife withdrawn from private collection globally in excellent condition

Knife from a private collection - The first and original Tanto "Made in Japan", here in the second series from 1986, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto - Overall in very good condition, with no particular scratches, marks or abrasions on blade and handle; a few small marks of time on scabbard - Product still has original factory sharpening, although it would need a brightening-no signs of wear anyway - Supplied with its own original leather scabbard marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: Japan
Blade: made of "Cold Steel's 400 Series Stainless" steel (presumably 420 stainless)
Blade treatment: satin finish
Handle: made of Kraton with brass guard and pommel
Blade length: 145m.
Blade thickness: 5mm.
Total length: 285mm.
Balance: backward
Weight: 259g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.

Knife from a private collection - The first and original Magnum Tanto "Made in Japan" from 1988, progenitor of the modern generation continued with the Magnum Tanto II in 1990 - Overall in very good condition, with no particular scratches, marks or abrasions on blade, handle and sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: Japan
Blade: stainless steel AUS-8A
Blade treatment: satin finish
Handle: kraton
Blade length: 230mm.
Blade thickness: 5mm.
Total length: 370mm.
Balance: advanced
Weight: 330g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.

Knife from a private collection - Very rare and highly sought after discontinued model dating back to 2000 - Peculiar tanto blade with chisel sharpening - This is a scaled down version of Timberline's Specwar model made in collaboration with Emerson - Like new, never used, perfect in every detail, with warranty and immaculate box - Checked and certified by our in-house laboratory.

Intended Use: Tactical / Collection

Type of manufacture: Industrial
Country of Production: USA
Blade: 440C stainless steel with chisel sharpening
Blade finish: matte microbead blasting
Handle: Nylon and Fiberglass
Blade length: 95mm.
Blade thickness: 2.5mm.
Total length: 220mm.
Weight: 105g.
Sheath: Kydex
Notes: 2000 knife from a private collection - Like new

Selvans Expeditions, as well as the Selvans model from which it derives, was born from the collaboration between Extrema Ratio and the Master instructor F.I.S.S. (Federazione Italiana Survival Sportivo e Sperimentale) Daniele Dal Canto. This tool is the result of the modification of the ONTOS, military survival knife, realized in order to accentuate and maximize the performance of the knife.

Selvans Expeditions uses Böhler N690 steel heat treated to 58 HRC with MIL-C-13924 burnishing and stone washed surface treatment (Dark Stone finish). The handle has been lengthened and the blade weighted to promote effective cutting strokes. It comes with a desert Cordura sheath with MOLLE system, equipped with a mini pouch containing paracord with flammable filament that can be used in case of emergency and/or critical weather conditions and a Firesteel for lighting fires.

The survival kit (not included and purchasable separately) has been optimized and includes whistle, chainsaw, drinking pads, compass, brass wire, flintlock, flashlight, paracord 2,5 mt. and sharpener.

Intended use: Survival / Heavy Utility

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924 with Dark Stone finish
Handle: Forprene
Blade length: 160mm.
Blade thickness: 6.3mm.
Total length: 312mm.
Balance: Advanced
Weight: 430g.
Sheath: Cordura, M.O.L.L.E. compatible.
Package: Cardboard box with Extrema Ratio logos
Notes: Designed and developed thanks to the collaboration with the instructor Daniele del Canto of F.I.S.S.S. (Federazione Italiana Survival Spotivo e Sperimentale).

Intended Use: utility / bushcraft

Type of Production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw Finish
Handle: Micarta
Blade Length: 105mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 260g.
Sheath: kydex
Package: -
Notes: Each knife is unique and handcrafted

Japanese steel blends with Italian excellence

For this 2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an easy regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.
Selvan model: for this First Production Run a run of 5 pieces numbered from 1 to 5 was created.

The Selvans was born from the collaboration between Extrema Ratio and FISSS (Italian Federation of Sports and Experimental Survival). The project consists of modifying the Ontos, a military survival knife, to accentuate and maximize the performance of the knife as a hiking tool.

The handle has been lengthened and the blade weighted to favor the effectiveness of the cutting strokes and to make more use of the inertia of the stroke.

Intended use: Heavy Utility
Type of production: Industrial
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade treatment: Testudo
Handle: Forprene
Blade length: 15.5mm.
Blade thickness: 6.3mm.
Total length: 310mm.
Thick when closed: -
Balancing: advanced
Weight: 424g.
Sheath: nylon, MOLLE compatible
Packaging: Cardboard box with Extrema Ratio logos
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate - being the cutting edge in carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a light surface of oil.

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Intended use: Tactical / Military

Type of production: Industrial
Country of production: China
Blade: full tang in SK-5 carbon steel
Blade treatment: powder coated
Handle: G10
Blade length: 117mm.
Blade thickness: 4mm.
Total length: 238mm.
Weight: 130g.
Sheath: FRN with belt or neck loop
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson

The Giant Mamba has a "tanto" blade in 6.3 mm thick Böhler N690 steel with a hardness of 58 HRC, flat edge and full length lightening.

The Forprene handle with locking by threaded tang makes the knife solid and well balanced. The MOLLE compatible sheath is made of shockproof nylon with a conical opening for rapid insertion and extraction and a system that avoids shaking noises, it is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and a reversible ambidextrous safety : simply pressing the trigger unlocks the blade.

 
Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Satin
Handle: Forprene
Blade length: 163mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 289g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

FULCRUM C model: for this First Production Run, a circulation of 10 pieces numbered from 1 to 10 was produced.

FULCRUM C is the compact version of FULCRUM, it maintains all the characteristics of solidity and robustness and, thanks to the reduced dimensions of the blade (only 110 mm) and the handle, it is easily portable and concealable. The rigid sheath can be positioned horizontally, vertically or in a 45 ° inclined position. The only safety of the sheath is automatic with extraction and re-insertion by pressure, this detail makes it an intuitive and extremely fast tool, particularly suitable for emergency use and for personal defense.

Use: backup knife
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade thickness: 6.3 mm.
Blade length: 90 mm.
Total length: 210 mm.
Balancing: set back to 0.5cm. from the guard branch
Weight: 210g.
Sheath: ABS with Tek-Lok multiposition attachment
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (V-Toku2, VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, reaches hardness and cutting performance significantly higher than that achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 carbon steel
Blade treatment: powder coating
Handle: micarta
Blade length: 175mm.
Blade thickness: 6.3mm.
Total length: 305mm.
Balancing: slightly advanced
Weight: 522g.
Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

Intended use: Tactical / Military

Type of production: Industrial
Country of production: Australia
Blade: full tang in steel D2 at 58 / 60HRC
Blade treatment: Teflon coating
Handle: G10
Blade length: 128mm.
Blade thickness: 6mm.
Total length: 265mm.
Balancing: Advanced
Weight: 347g.
Sheath: in Kydex, with Tek-Lok attacks
Packaging: cardboard box
Note: -

Type of production: handmade
Production Country: Italy
Blade: D2 steel 59 / 60HRC
Treatment: Raw
Handle: Micarta
Blade length: 100mm.
Blade thickness: 6.5mm.
Overall length: 220mm.
Balancing: backward
Weight: 338g.
Sheath: Kydex, thermoformed, with Tek-Lok attack
Packaging: -
Notes: Each knife is unique and handmade; there may be slightly different from the one shown in the pictures

Use target: Neck Knife / Sportsman / Tactical

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. Harsey

Purpose of use: Collection / Sportsman / Machete

Type of production: Artisan
Blade Production: Japan
Blade: Hand forged, rolled damper with Hitachi Shirogami cutting edge at 64HRC
Blade Treatment: -
Manicure: Paracord
Blade Length: 125mm.
Blade thickness: 5mm.
Closed length: -
Total Length: 245mm.
Closure thickness: -
Balance: -
Weight: 205g.
Closure: -
Clip: -
Sheath: IN LEATHER
Packing: Carton box
Notes: Hand made entirely by Takeshi Saji

Intended use: Hiking / Backup

Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 118mm.
Blade thickness: 5mm.
Total Length: 232mm.
Weight: 145g.
Sheath: Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

Intended use: Hiking / Backup

Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 103mm.
Blade thickness: 5mm.
Overall length: 217mm.
Weight: 141g.
Sheath: In Nylon, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

Intended use: Hiking / Backup

Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: Brush MIL-C-13924
Handle: Forprene
Blade Length: 118mm.
Blade thickness: 5mm.
Total Length: 232mm.
Weight: 145g.
Sheath: In Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

Intended use: Hiking / Backup

Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: Brush MIL-C-13924
Handle: Forprene
Blade Length: 103mm.
Blade thickness: 5mm.
Overall length: 217mm.
Weight: 141g.
Sheath: In Nylon, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

NK3 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.

The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 153mm.
Weight: 82g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

With the T4000 C continues the purest series so Extrema Ratio, for lovers of the profile of Japanese blades that do not want to give up the accessories typically tactical as sheath and handle.

Intended use: Tactical / Backup

Type of production: Industrial
Production Country: Italy
Blade: stainless steel Bohler N690Co to 58HRC
Treatment blade: Browning MIL-C-13924
Handle: Forprene
Blade length: 174mm.
Blade thickness: 4mm.
Length closed: -
Overall length: 304mm.
Thick when closed: -
Balancing: -
Weight: 264g.
Closing: -
Clip: -
Sheath: Nylon
Packaging: Cardboard box with logos Extrema Ratio
Notes: -

The Selvans is born from the collaboration between Extrema Ratio and FISSS (Italian Federation of Sports and Experimental Survival). The project consists of modifying Ontos, a military survival knife, to accentuate and maximize the knife's performance as a hiking tool.

The handle has been lengthened and the blade weighed down to facilitate the effectiveness of the cutting strokes and to make more use of the inertia of the blow.

Intended use: Heavy Utility
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Surface treatment: Brun-MIL-C-13924
Handle: Forprene
Blade length: 15.5mm.
Blade thickness: 6.3mm.
Total length: 310mm.
Balancing: advanced
Weight: 424g.
Sheath: nylon, MOLLE compatible
Packaging: Cardboard box with Extrema Ratio logos
Note: developed in collaboration with FISSS (Italian Federation of Sports and Experimental Survival)

Extrema Ratio - Kukri KL - Training Knife

Intended Use: Training
Production: Italy
Blade: Aluminium 6061 T6 Aviation
Treatment: Anodizing
Handle: Forprene
Sheath: -
Blade length: 340mm
Overall Length: 470mm
Blade thickness: 6mm
Weight: 296g.

After insistent requests from professional customers, Extrema Ratio decided to create a survival tool suitable for every situation.

Hence the Ontos, (from the Greek "la cosa") a pure, robust, heavy but compact field knife. A portion of the blade is serrated to have a part of the knife always sharpened and ready for use.

The nylon thigh sheath with M.O.L.L.E. he remains on the soldier even when in case of withdrawal he is forced to abandon the primary, heavy and tactical equipment. A pocket is fixed to the scabbard, also with the M.O.L.L.E. system, containing a survival kit that makes the Ontos a real survival knife; in addition a fluorescent stick (duration 12 hours) and a diamond sharpener.

The survival kit contains:
* container for water
* water purifying tablets
* nylon lanyard
* mini compass
* candle
* Flint
* wire saw
* fishing kit
* multi-tool
* matches
* needle and thread kit
* razor blade
* emergency whistle
* copper wire
* SOS mirror
* lapis
* instructions for survival (in English).

Technical Data of the Knife:
BLADE LENGTH: 165 mm
TOTAL LENGTH: mm 298
BLADE THICKNESS: 6.3 mm
WEIGHT KNIFE: gr 400
TOTAL WEIGHT: 1000 gr
STEEL BLADE: BOHLER N690 (58HRC)
HANDLE MATERIAL: Forprene
DENTATION: YES
FINISHING / SURFACE TREATMENT: Testudo

Intended use: Tactical / Military

Type of production: Industrial
Lama production: Germany
Blade: 440A 55 / 56HRC steel
Blade treatment: Teflon-coating
Handle: Fiberglass reinforced polyamide
Blade length: 170mm.
Blade thickness: 5mm.
Length closed: -
Total length: 295mm.
Thick when closed: -
Balancing: on the guard branch
Weight: 270g.
Closing: -
Clip: -
Sheath: cordura and polyamide
Packaging: cardboard box
Notes: single piece - as shown in the photo the product has a defect in the covering of the blade close to the tip