Fixed Blade Knives: sturdiness and versatility for every adventure
-
Peltonen Knives - M23 Ranger Cub Orange - FJP308 - puukko knife
The M23 Ranger Cub knife features a 6.5-centimeter carbon steel blade with an induction-hardened edge at 62 HRC. Remember that carbon steel always requires some care, so keep the blade clean and wash and dry it after each use. You can also apply a little oil to the blade from time to time. With proper care, corrosion is kept at bay and the blade remains intact.
The handle material is TPV, thermoplastic vulcanized, a type of rubber-like plastic material that resists wear, impact, chemicals and temperature changes almost indefinitely. The secure grip remains firm even in wet conditions.
Thanks to the Kydex sheath, the knife can be easily carried on the belt in a horizontal position.
Intended Use: Hiking / Hunting / BushcraftProduction type: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 62HRC
Blade treatment: Dual Tone
Handle: TPV (vulcanized thermoplastic)
Blade length: 65mm.
Blade thickness: 3.3mm.
Total length: 165mm.
Weight: 78g.
Sheath: Kydex
Packaging: Cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka PeltonenPE-FJP308 -
Peltonen Knives - M07 Ranger Puukko - Black Uncoated - FJP146 - Knife
The Ranger Puukko is a versatile knife ideal for international special units and civilian use such as bushcraft, hunting and camping.
Made with precision and high-quality materials, it offers a secure grip, a sharp blade and a practical sheath. No frills, it ensures safety and consistent performance in all seasons and circumstances. The EasyLock composite sheath allows for safe and quiet carrying.
It synthesizes the traditional Puukko with the ruggedness of a military knife, symbolizing perseverance and the pursuit of perfection. The Ranger Puukko is a reliable companion in any environment, embodying the resilience and functionality of Nordic knives.
Intended Use: Hiking / Hunting / BushcraftType of production: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 59HRC
Blade treatment: Dual Tone, partially treated with Cerakote
Handle: TPV (vulcanized thermoplastic)
Blade length: 119mm.
Blade thickness: 4.25mm.
Total length: 243mm.
Weight: 180g.
Sheath: composite material
Packaging: cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka PeltonenPE-FJP146 -
Benchmade - Station Kitchen Knife - DLC CPM-154CM & G10 with Carbon Fiber - 4010BK-01 - field kitchen knife
A minimalist workhorse: this ultra-versatile kitchen tool was built, designed and crafted to give you the best. From field to table, this unique knife combines the power and exceptional quality of Benchmade's proprietary SelectEdge technology for unparalleled cutting.
The wide CPM-154 blade extends to a precisely shaped handle that provides a comfortable grip for extended use. The knife comes with a plastic sheath that allows liquids to drain away from the knife thanks to drainage holes.
Intended Use: Universal household and field kitchen knife
Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-154CM 58/61HRC
Blade finish: Black DLC
Handle: G10 Green and Carbon Fiber
Blade length: 148mm.
Blade thickness: 2.5mm.
Total length: 273mm.
Weight: 179g.
Blade Cover: plastic material, with drainage holes
Packaging: Box made of cardboard and recycled materials, with Benchmade logos
Notes: designed to be used both in the home kitchen and on hikesBM-4010BK-01 -
Benchmade - Station Kitchen Knife - CPM-154CM & Tan Richlite - 4010-02 - field kitchen tool
A minimalist workhorse: this ultra-versatile kitchen tool was built, designed and crafted to give you the best. From field to table, this unique knife combines the power and exceptional quality of Benchmade's proprietary SelectEdge technology for unparalleled cutting.
The wide CPM-154 blade extends to a precisely shaped handle that provides a comfortable grip for extended use. The knife comes with a plastic sheath that allows liquids to drain away from the knife thanks to drainage holes.
Intended Use: Universal household and field kitchen knife
Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-154CM 58/61HRC
Blade Finish: Stonewashed
Handle: Tan Richlite and Black G10
Blade length: 148mm.
Blade thickness: 2.5mm.
Total length: 273mm.
Weight: 179g.
Blade Cover: plastic material, with drainage holes
Packaging: Box made of cardboard and recycled materials, with Benchmade logos
Notes: designed to be used both in the home kitchen and on hikesBM-4010-02 -
ExtremaRatio - Dobermann IV Tactical Black - Bohler S600 64HRC - knife
ExtremaRatio - Dobermann IV Knife - S600 - Tactical Black represents the evolution of the first and most classic Extrema Ratio model, the K1 DOBERMANN. Since 1997, the DOBERMANN model has undergone significant aesthetic and design changes, adapting to the evolution of tastes and trends while remaining true to the original designs. Versatility of use and structural resistance are the main characteristics of DOBERMANN IV S600, making it ideal for hunting, survival, camping, and military use.
-
- Type: Tactical / Collection
- Blade Production: Italy
- Blade: Stainless steel S600 64hrc
- Blade Treatment: EXP DARK
- Handle: Forprene
- Blade Length: 185mm
- Blade Thickness: 6.3mm
- Total Length: 315mm
- Weight: 360g
- Sheath: Cordura with M.O.L.L.E attachments
- Packaging: Cardboard box with Extrema Ratio logos
The blade of the DOBERMANN IV S600, made from Böhler S600 steel, offers excellent hardness, wear resistance, and toughness, thanks to the high content of molybdenum, tungsten, and vanadium. The addition of cobalt promotes the formation of small carbides, further improving wear resistance. With a hardness of 64 HRC, it ensures long-lasting edge retention. The “EXP DARK” teflon coating protects the steel from oxidation.
DOBERMANN IV S600 features a green forprene handle with a glass-breaking tang. It comes with a green cordura thigh sheath, adaptable for both left and right-handed users and compatible with the M.O.L.L.E system.
ER-DOB-S600 -
-
Wander Tactical - Mountain Lion Custom Edition - Marble & Micarta Brown - handcrafted knife
Intended Use: Excursionism / Heavy Duty
Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC
Blade Finish: Black
Handle: Micarta
Blade Length: 140mm.
Blade thickness: 6.3mm.
Total length: 257mm.
Balance: advanced
Weight: 433g.
Sheath: leather, handcrafted
Packaging: certificate of guarantee and authenticity
Notes: Each knife is unique and handcrafted in every partWT-ML-MMB -
ExtremaRatio - Col Moschin Paper Knife - letter opener
COL MOSCHIN Paper Knife is a taglicarte whose outline is faithfully derived from one of the most iconic knives of our production, the Col Moschin model, adopted by the 9th Parachute Assault Regiment "Col Moschin."
This instrument is part of a larger collection.
COL MOSCHIN Paper Knife is not only a decorative and evocative accessory, but it also has all the tactical features that are part of Extrema Ratio's DNA.
It features nylon grips and a sturdy steel blade that echoes the same shape as its big brother.
COL MOSCHIN Paper Knife is very practical and convenient for the office or home office and is also perfectly suited as an original gift idea.
Intended Use: Collection/Tactical/Military
Country of manufacture: Italy
Blade: stainless steel NOT SHARPENED
Blade Finish: Burnishing MIL-C-13924
Handle: nylon
Blade length: 100mm.
Blade thickness: 1.5mm.
Total length: 180mm.
Weight: 45g.
Sheath: -
Packaging: cardboard box with Extrema Ratio logos.
Notes: -ER-COL-PK -
Fox - Oxylos - Satin Becut & Olive Wood - FX-616OL - hunting and bushcraft knife
Explore the power of modernity and boldness with the OXYLOS FX-616 OL knife. Embodying the quintessence of contemporary pugnacity and aggressive design, this tool is more than just a bushcraft knife: it is an icon of innovation. With a BECUT stainless steel blade that promises durability and strength, combined with a sought-after satin finish for an elegant finish, the OXYLOS is ready to take on any challenge.
The olive wood handle offers a secure and comfortable grip, while stainless steel screws ensure strength and durability. Complete with a leather sheath for safe and stylish carrying, the OXYLOS is ready to be the ideal companion for outdoor adventurers.
Masterfully crafted in Italy, the OXYLOS is more than just a knife: it is an experience, a symbol of exceptional performance and timeless style.
Intended Use: Hunting / Hiking / Bushcraft / UtilityType of production: Industrial
Country of manufacture: Italy
Blade: full tang in Becut 56/58HRC stainless steel
Blade treatment: Satin finish
Handle: Olive wood
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 240mm.
Balance: On the guard branch
Weight: 270g.
Sheath: leather, belt, ambidextrous, for horizontal or vertical carry
Packaging: cardboard box with Fox logos
Notes: -FX-616OL -
Fox - Oxylos - Stonewashed Becut & Black Micarta - FX-616MB - bushcraft knife
Explore the power of modernity and boldness with the OXYLOS FX-616 MB knife. Embodying the quintessence of contemporary combativeness and aggressive design, this tool is more than just a bushcraft knife: it is an icon of innovation. With a BECUT stainless steel blade that promises durability and strength, combined with a stone washed surface treatment for a rugged finish, the OXYLOS is ready to take on any challenge.
The black micarta handle offers a secure and comfortable grip, while stainless steel screws ensure strength and durability. Complete with a leather sheath for safe and stylish carrying, the OXYLOS is ready to be the ideal companion for outdoor adventurers.
Masterfully crafted in Italy, the OXYLOS is more than just a knife: it is an experience, a symbol of exceptional performance and timeless style.
Intended Use: Hiking / Bushcraft / Utility
Type of production: Industrial
Country of manufacture: Italy
Blade: full tang in Becut 56/58HRC stainless steel
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 240mm.
Balance: On the guard branch
Weight: 273g.
Sheath: leather, belt, ambidextrous, for horizontal or vertical carry
Packaging: cardboard box with Fox logos
Notes: -FX-616MB -
Fox - Defender - Black Top Shield N690Co & FRN - FX-689B - knife
In this new edition of the Defender FX-689, we have focused our attention on the blade, introducing an extraordinary 5 mm thick N690Co blade, which gives it particularly high strength. The handle features deep transverse grooves for an extremely secure grip.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: Black Top Shield
Handle: FRN (Fiberglass Reinforced Nylon) with Black Top Shield steel guard and pommel
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 320mm.
Weight: 360g.
Sheath: made of Kydex, with M.O.L.L.E. compatible loops.
Packaging: cardboard box with Fox logos
Notes: -FX-689B -
Benchmade - Meatcrafter 4" - Dark Olive Santoprene Hybrid Hunting Knife - 15505 - knife
From field work to food preparation in the outdoor field kitchen, the 15505 Meatcrafter 4" derives from its full-size counterpart in terms of handle ergonomics and hybrid fixed blade profile, but offers a slightly smaller blade for even finer, more precise and detailed work.
The CPM-154 premium stainless steel blade with 14° SelectEdge is designed specifically for working with smaller animals such as game and poultry, with the perfect amount of blade for delicate cuts around the sternum.
With a Dark Olive Santoprene handle for a secure grip even in wet environments, the Meatcrafter 4" is a no-holds-barred cutting tool for the most experienced hunter.
Intended Use: Hunting / Meat KnifeType of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-154 58/61HRC
Blade finish: Stonewashed
Handle: Santoprene
Blade length: 102mm.
Blade thickness: 2.3mm.
Total length: 225mm.
Weight: 76.8g.
Sheath: Two-tone boltaron (one side black, one side orange)
Packaging: cardboard box with Benchmade logos
Notes: smaller and more compact version of the Meatcrafter modeloBM-15505 -
Benchmade - Sibert Mini Bushcrafter - CPM-S30V & OD Green G10 - 165-1 - knife
Survival in the wilderness can depend on the tools you carry, and the 165-1 Mini Bushcrafter is a compact take on the classic outdoor bushcrafting knife, the most important tool in your kit.
With an 8.5cm. fixed blade made of premium CPM-S30V sintered stainless steel and an all-weather durable G10 OD Green handle with a highly visible red G10 spacer, the 165-1 Mini Bushcrafter is purpose-built for all of the toughest outdoor tasks, including fire bait preparation, batoning, shelter construction, and food preparation.
Redesigned with updated blade geometry and handle ergonomics to the demands of modern users, it can be kept handy in the leather sheath to be worn on the belt, which also features a special recess for carrying a firestarter.
Intended Use: Utility / HikingType of production: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC sintered stainless steel
Blade finish: Stonewash
Handle: G10
Blade length: 85mm.
Blade thickness: 4.2mm.
Total length: 192mm.
Weight: 183g.
Sheath: leather, with belt loop for vertical carry
Packaging: cardboard box with Benchmade logos
Notes: Design by Shane SibertBM-165-1 -
Benchmade - Sibert Bushcrafter - CPM-S30V & OD Green G10 - 163-1 - knife
Survival in the wilderness can depend on the tools you carry, and the 163-1 Bushcrafter is a reimagining of the classic outdoor bushcrafting knife, the most important tool in your kit.
With a fixed 11-cm. blade of premium CPM-S30V sintered stainless steel and an all-weather durable G10 OD Green handle with a highly visible red G10 spacer, the 163-1 Bushcrafter is purpose-built for all of the toughest outdoor tasks, including fire bait preparation, batoning, shelter construction, and food preparation.
Redesigned with updated blade geometry and handle ergonomics to the demands of modern users, it can be kept handy in the leather sheath to be worn on the belt, which also features a special recess for carrying a firestarter.
Intended Use: Utility / HikingType of production: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC sintered stainless steel
Blade finish: Stonewash
Handle: G10
Blade length: 111mm.
Blade thickness: 4.2mm.
Total length: 229mm.
Weight: 218g.
Sheath: leather, with belt loop for vertical carry
Packaging: cardboard box with Benchmade logos
Notes: Design by Shane SibertBM-163-1 -
Peltonen Knives - M95 Ranger Puukko - Coyote PTFE - FJP120 - Knife
The Ranger Puukko is a versatile knife ideal for international special units and civilian use such as bushcraft, hunting and camping.
Made with precision and high-quality materials, it offers a secure grip, a sharp blade and a practical sheath. No frills, it ensures safety and consistent performance in all seasons and circumstances. The EasyLock composite sheath allows for safe and quiet carrying.
It synthesizes the traditional Puukko with the ruggedness of a military knife, symbolizing perseverance and the pursuit of perfection. The Ranger Puukko is a reliable companion in any environment, embodying the resilience and functionality of Nordic knives.
Intended Use: Hiking / Hunting / BushcraftType of production: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 59HRC
Blade treatment: Teflon coated PTFE
Handle: TPV (vulcanized thermoplastic)
Blade length: 150mm.
Blade thickness: 4.25mm.
Total length: 273mm.
Weight: 198g.
Sheath: composite material
Packaging: cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka PeltonenPE-FJP120 -
Peltonen Knives - M95 Ranger Puukko - Black Uncoated - FJP144 - Knife
The Ranger Puukko is a versatile knife ideal for international special units and civilian use such as bushcraft, hunting and camping.
Made with precision and high-quality materials, it offers a secure grip, a sharp blade and a practical sheath. No frills, it ensures safety and consistent performance in all seasons and circumstances. The EasyLock composite sheath allows for safe and quiet carrying.
It synthesizes the traditional Puukko with the ruggedness of a military knife, symbolizing perseverance and the pursuit of perfection. The Ranger Puukko is a reliable companion in any environment, embodying the resilience and functionality of Nordic knives.
Intended Use: Hiking / Hunting / BushcraftType of production: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 59HRC
Blade treatment: Dual Tone, partially treated with Black Cerakote coating
Handle: TPV (vulcanized thermoplastic)
Blade length: 150mm.
Blade thickness: 4.25mm.
Total length: 273mm.
Weight: 198g.
Sheath: composite material
Packaging: cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka PeltonenPE-FJP144 -
Peltonen Knives - M95 Ranger Puukko - Black Cerakote - FJP002 - Knife
The Ranger Puukko is a versatile knife ideal for international special units and civilian use such as bushcraft, hunting and camping.
Made with precision and high-quality materials, it offers a secure grip, a sharp blade and a practical sheath. No frills, it ensures safety and consistent performance in all seasons and circumstances. EasyLock composite scabbard allows for safe and quiet carrying.
It synthesizes the traditional Puukko with the ruggedness of a military knife, symbolizing perseverance and the pursuit of perfection. The Ranger Puukko is a reliable companion in any environment, embodying the resilience and functionality of Nordic knives.
Intended Use: Hiking / Hunting / BushcraftType of production: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 59HRC
Blade treatment: Black Cerakote
Handle: TPV (vulcanized thermoplastic)
Blade length: 150mm.
Blade thickness: 4.25mm.
Total length: 273mm.
Weight: 198g.
Sheath: composite material
Packaging: cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka PeltonenPE-FJP002 -
Peltonen Knives - M23 Ranger Cub Black - FJP305 - Puukko Knife
The M23 Ranger Cub knife features a 6.5-centimeter carbon steel blade with an induction-hardened edge at 62 HRC. Remember that carbon steel always requires some care, so keep the blade clean and wash and dry it after each use. You can also apply a little oil to the blade from time to time. With proper care, corrosion is kept at bay and the blade remains intact.
The handle material is TPV, thermoplastic vulcanized, a type of rubber-like plastic material that resists wear, impact, chemicals and temperature changes almost indefinitely. The secure grip remains firm even in wet conditions.
Thanks to the Kydex sheath, the knife can be easily carried on the belt in a horizontal position.
Intended Use: Hiking / Hunting / BushcraftProduction type: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 62HRC
Blade treatment: Dual Tone
Handle: TPV (vulcanized thermoplastic)
Blade length: 65mm.
Blade thickness: 3.3mm.
Total length: 165mm.
Weight: 78g.
Sheath: Kydex
Packaging: Cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka PeltonenPE-FJP305 -
Wander Tactical - Mountain Lion Custom Edition - Dual Tone & Micarta Green - handmade knife
Intended Use: Excursionism / Heavy Duty
Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC
Blade Finish: Dual Tone, Black & Satin
Handle: Micarta
Blade Length: 140mm.
Blade thickness: 6.3mm.
Total Length: 255mm.
Balance: advanced
Weight: 425g.
Sheath: leather, handcrafted
Packaging: certificate of guarantee and authenticity
Notes: Each knife is unique and handcrafted in every partWT-ML-DTMG -
ExtremaRatio - KIRI Neck Knife - N690Co Dark Stone Washed - Kiridashi Knife
The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While retaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency.
Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.
Intended use: Neck knife / UtilityType of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: Dark Stone Washed
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)ER-KIRI-DSW -
ExtremaRatio - KIRI Neck Knife - N690Co Satin - Kiridashi Knife
The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While maintaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency.
Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.
Intended use: Neck knife / UtilityType of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: satin finish
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)ER-KIRI-SA -
Wander Tactical - One of a Kind FC WT Knife - Primitive D2 & Leather - Custom Knife
Spectacular one-of-a-kind, specially made for Coltelleria Collini, reminiscent of primitive knives made of obsidian. The blade is masterfully handcrafted faceted and the handle is made of hand woven leather and leather.
The scabbard is made of thermoformed kydex to which soft, fine brown greased leather has been applied externally.
It is completed by the beautiful, entirely handcrafted wooden box with engraved Wander Tactical logos and runes, with the inner part that holds the knife made of handcrafted leather.
Intended Use: CollectionType of production: Handcrafted - one-of-a-kind
Country of production: Italy
Blade: ** unsharpened ** made of D2 steel at 59/60HRC
Blade treatment: primitive, reminiscent of prehistoric obsidian knives
Handle: leather and leather
Blade length: 150mm.
Blade thickness: 4mm.
Total length: 265mm.
Balance: backward
Weight: 166g.
Scabbard: kydex, with handcrafted leather outer cover
Packaging: antiqued wooden box, with engraved logos and runes and handcrafted leather interior
Notes: unsharpened knifeWT-FCWT -
MoraKniv - Basic 546 Limited Edition 2024 - Dala Red & Ivy Green - 14282 - knife
This year's colors come from the 17th century Mora folk dress, one of Sweden's oldest folk dresses. Here the green fabric meets the classic Dala Red color typical of our knives. Together, they breathe new life into the color combination that once made the people of Mora famous all over the world.
Mora folk dress is still worn by people on special occasions, such as midsummer, weddings or folk music events. Over the years, the dress has undergone few changes and has remained largely the same as it always has. The Mora folk dress and the Morakniv are both worn with pride, in keeping with the tradition established by the ancestors and the heritage that has been developed and cultivated over the years.
The knife, with its ergonomic barrel-shaped polymer handle, features a sturdy finger guard and a 2.0 mm-thick carbon steel blade that provides strength and stability with every cut.
Intended use: hiking / hunting / sportsType of production: industrial
Blade: 12C27 recycled Swedish stainless steel
Country of manufacture: Sweden
Handle: thermoplastic
Blade length: 91mm.
Blade thickness: 2mm.
Total length: 206mm.
Weight: 109g.
Scabbard: plastic material
Notes: exclusive, limited edition coloring for the year 202414282 -
MoraKniv - Basic 511 Limited Edition 2024 - Ivy Green & Dala Red - 14281 - knife
This year's colors come from the 17th century Mora folk dress, one of Sweden's oldest folk dresses. Here the green fabric meets the classic Dala Red color typical of our knives. Together, they breathe new life into the color combination that once made the people of Mora famous all over the world.
Mora folk dress is still worn by people on special occasions, such as midsummer, weddings or folk music events. Over the years, the dress has undergone few changes and has remained largely the same as it always has. The Mora folk dress and the Morakniv are both worn with pride, in keeping with the tradition established by the ancestors and the heritage that has been developed and cultivated over the years.
The knife, with its ergonomic barrel-shaped polymer handle, features a sturdy finger guard and a 2.0 mm-thick carbon steel blade that provides strength and stability with every cut.
Intended use: hiking / hunting / sportsType of production: industrial
Blade: carbon steel C100
Country of manufacture: Sweden
Handle: thermoplastic
Blade length: 91mm.
Blade thickness: 2mm.
Total length: 206mm.
Weight: 109g.
Scabbard: plastic material
Notes: exclusive, limited edition coloring for the year 202414281 -
Livio Montagna - 2014 Hunting Knife - RWL34 & Sambar Amber - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratoryIntended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.AP-MONT-CPSA -
Livio Montagna - 2017 Fighter - N690Co & Snake Wood - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratoryIntended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel N690Co hardened to 59/60 HRC
Blade finish: satin finish
Handle: Snakewood - 416 stainless steel guard and pommel
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 240mm.
Weight: 185g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from a private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.AP-MONT-CPFD -
Benchmade - Meatcrafter - Dark Olive Santoprene - 15500-04 - knife
When your field adventures transition to the kitchen, the right cutting tool can make all the difference!
The new 15500 Meatcrafter™️ is a fixed hybrid hunting knife with a blade design ideal for cutting, boning or slicing your favorite cuts of meat. Featuring Benchmade's new SelectEdge™ technology, the 28° sharpening angle of the CPM-154 stainless steel blade provides the perfect balance of penetration, strength, edge retention and blade flexibility. Ideal to take with you on your hunting trips, but also a reliable companion in the kitchen or during the most demanding barbecues!
Intended Use: Hunting / Meat Knife
Type of production: Industrial
Country of manufacture: USA
Blade: CPM-154 58/61HRC stainless steel
Blade finish: Stonewashed
Handle: Santoprene
Blade length: 154mm.
Blade thickness: 2.3mm.
Total length: 281mm.
Weight: 91.8g.
Sheath: Boltaron
Packaging: Cardboard box with Benchmade logos
Notes: -BM-15500-04 -
Tommy Lee - Clip Point - Damascus & Giraffe Bone - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1990 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade; artisan passed away in 2013
* Sharpening: Factory sharpening, can be improved.
* Marks on blade: A few small oxidation marks on handle.
* Marks on handle: A few small marks on steel bolsters due to time.
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks from time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Collection/GentlemanType of production: Handcrafted
Country of Production: USA
Blade: full tang, handcrafted carbon damascus steel
Handle: stainless steel heads and giraffe bone handles
Blade length: 104mm
Blade thickness: 3mm.
Total length: 196mm.
Weight: 94g.
Sheath: Leather, for belt or boot, with steel clip for attachment
Packaging: -
Notes: rare handcrafted knife made in 1990 by well-known American knife maker Tommy LeeFC-TLEE-DG-CP -
Peter Herbst - Engraved Integral - CPM-T440V & Fossil Ivory - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 03/1990 model, in like-new condition
* Commercially available: Unique knife, entirely custom made and hand-engraved
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house workshopIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: Germany
Blade: stainless steel CPM-T440V at 60HRC
Blade finish: mirror polish
Handle: integral from solid, fully hand-engraved, with fossil ivory grips and red micarta spacers
Blade length: 93mm
Blade thickness: 4mm.
Total length: 203mm.
Weight: 99g.
Sheath: Leather
Packaging: -
Notes: rare handcrafted knife made in March 1990 by well-known German knifemaker Peter Herbs, a member of the German Knifemakers' Guild and a member of the very prestigious American Knifemakers' Guild.FC-PHERBST-CP -
Boker Plus - Makri by Kornel Kiss - 02BO089 - knife
The Zeitgeist is the sum total of those visions that are born in the present, shape an entire era, and are long gone by the creative minds that generated them. As a specialist in tactical and outdoor knives, Hungarian free spirit and knife maker Kornel Kiss regularly dares to look beyond the tip of his nose and, in the Boker Plus Makri, combines the elements of a practical EDC knife with the advantages of a Kukri blade, whose historical origins go back to Nepal.
Intended Use: UtilityProduction Type: Industrial
Country of manufacture: China
Blade: ful tang in D2 steel
Blade finish: Blacwashed
Handle: G10
Blade length: 71mm.
Blade thickness: 3mm.
Total length: 159mm.
Weight: 94g.
Sheath: made of Kydex, with Tek-Lok type attachment
Packaging: cardboard box with Boker Plus logos
Notes: Design by Kornel KissBO-02BO089 -
La Cantina - Khorakhané Custom Knife - ApexUltra & Ironwood - Handcrafted Knife
Type of Production: Handcrafted
Blade Production: Italy
Blade: Apex Ultra steel at 63HRC
Blade Finish: Stone Washed
Handle: Ironwood, G10, and carbon pins
Blade Length: 90mm
Blade Thickness: 4.8mm
Total Length: 204mm
Balance: Set back 3cm from the guard branch
Weight: 179g
Sheath: Hand-stitched and crafted leather
Notes: unique knife handcrafted for Coltelleria Collini of Busto Arsizio - No. 310LC-KK-IW -
La Cantina - Khorakhané Custom Knife - ApexUltra & Birch - Handcrafted Knife
Type of Production: Handcrafted
Blade Production: Italy
Blade: Apex Ultra steel at 63HRC
Blade Finish: Stone Washed
Handle: Stabilized Birch, G10, and carbon pins
Blade Length: 90mm
Blade Thickness: 4.8mm
Total Length: 204mm
Balance: shifted 3cm back from the guard branch
Weight: 179g
Sheath: hand-stitched and crafted leather
Packaging and Certificate: Cordura case and authenticity certificate
Notes: unique knife handcrafted for Coltelleria Collini of Busto Arsizio - No. 309LC-KK-BC -
Boker - Mini Bronco 80CrV2 Bushcraft Knife - 121505 - knife
Intended Use: Utility
Production type: Industrial
Country of Production: Germany - Solingen
Blade: ful tang 80CrV2 steel
Blade finish: Stone Washed
Handle: TPE
Blade length: 89mm.
Blade thickness: 3.5mm.
Total length: 210mm.
Weight: 137g.
Sheath: kydex
Packaging: cardboard box with Boker Germany logos
Notes: -BO-121505 -
Fox - Tur Fixed G10 Multicolor by Vox - FX-529 TR- N690 Steel - Sports Knife
Usage: Sports
Type of Production: Industrial
Country of Production: Italy
Blade: Full tang in N690Co stainless steel
Blade Treatment: Black Hydroglider
Handle: Multicolor G10
Blade Length: 110mm
Blade Thickness: 4mm
Total Length: 220mm
Balance: -
Weight: 160g
Sheath: Kydex
Packaging: Cardboard box with Fox logos
Notes: Design by Jesper VoxnaesFX-529TR -
Zero Tolerance - ZT0006BLK - Limited Edition Sprint Run - CPM-3V & Black G10 - knife
Intended Use: Tactical / Sporting
Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market onlyZT0006BLK -
ExtremaRatio - Misericordia Ranger - XXV Anniversarium Limited Edition - knife
Extrema Ratio Misericordia Ranger XXV Anniversarium Limited Edition is a limited series version of only 400 pieces that preserves intact all the features of the famous Misericordia model adopted by the 4th Alpine Parachute Regiment.
Misericordia Ranger XXV Anniversarium Limited Edition comes with 2 sheaths, both in desert color: the first, produced in kydex, offers the possibility of attachment via belt-clip, ulti-clip and malice-clip (optional accessories not included with the product). Attachment to the M.O.L.L.E. system by braiding the paracord is also possible. The second, made of high-strength Nylon, has 2 adjustable loops that allow it to be attached to M.O.L.L.E. systems.
Intended Use: Tactical/Multi-role
Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Geotech Camo (Black Warfare)
Handle: FRN (fiberglass reinforced Nylon) with skull crasher / rear glass breaker
Blade length: 118mm.
Blade thickness: 4mm.
Total length: 233mm.
Weight: 87g.
Sheath: double sheath: Kydex and ABS.
Packaging: polypropylene case with Misericordia / Extrema Ratio logos and commemorative Coin
Notes: Limited edition of only 400 pieces, numbered on box and blade to celebrate the company's 25th anniversaryER-MIS-RALE -
Maserin - Mini Trapper - Elmax & Deer Horn - 924/CV-1 - knife
Mini-Trapper is a fixed-blade outdoor knife that, thanks to its small size, can be carried comfortably in your pocket while hiking.
Made of Elmax steel with a hardness of 61 HRC, it is extremely durable and suitable for all uses, including hunting to process small prey. The groove on the back of the blade acts as a thumb gripper allowing the knife to be guided safely.
Mini-Trapper has a one-piece construction into which deer antler insignia are attached by steel screws.
Intended Use: Hunting / Hiking
Production type: Industrial
Country of manufacture: Italy
Blade: full tang in Elmax 61HRC steel
Blade treatment: Stonewashed
Handle: deer antler
Blade length: 65mm.
Blade thickness: 4mm.
Total length: 120mm.
Weight: 76g.
Sheath: leather
Packaging: cardboard box with Maserin logos
Notes: -MA-924/CV-1 -
Ka-Bar - TDI Pocket Strike - Karambit Knife - 2491 - knife
Intended use: Tactical / EDC
Production type: Industrial
Country of manufacture: Taiwan
Blade: Full tang in AUS-8 57/59HRC stainless steel
Blade finish: Powder coated
Handle: Zytel
Blade length: 80mm.
Blade thickness: 3.7mm.
Total length: 197mm.
Weight: 117g. (172g. with sheath)
Sheath: ABS with clip
Notes: -KB-2491 -
Viper - Basic 1 by T. Rumici - D2 & Green Canvas Micarta - VT4028CG - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: full tang in D2 steel
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 203mm.
Weight: 210g.
Sheath: made of Kydex, with Tek-Lok type attachment
Packaging: cardboard box with Viper logos
Notes: design by Tommaso RumiciVT4028CG -
Boker Plus - Andhrimnir Mini Knife by Midgards knife - 02BO091 - knife
In Norse mythology, Andhrimnir tirelessly took care of the physical well-being of the gods and the honorably fallen heroes, who thoroughly enjoyed their existence in the carefree warriors' paradise, Valhalla.
For this purpose, he slaughtered the beast Sæhrimnir day after day, which was then resurrected at night to be eaten again the following day. A fleeting glance at Midgard (the Norse term for earth/world) would have elevated the chef's status even further in the eyes of the gods. This is because the knife craftsman Dirk Hofmeister knows like no other how to create mythical blades infused with Norse magic.
The Andhrimnir Mini bears the unmistakable hallmarks of Midgard's full tang constructed knives, with a 6mm thick Wharncliffe blade made of D2 in a two-tone finish with grooves on both sides and jimpings to ensure optimal functionality and maximum stability for all daily cutting tasks. The ergonomic and milled handles* made of G10 allow for comfortable and effortless work.
The custom-fitted Kydex sheath with a full-sized belt adapter, as well as a lanyard hole, harmoniously round off the package and revive the spirit of the Vikings in the fixed blade knife. * Other handles in a wide range of shapes and colors can be directly downloaded from us as a file for the home 3D printer or custom-made by Midgards Messer.
Intended use: Utility
Type of production: Industrial
Country of production: China
Blade: full tang in D2 steel
Blade finish: Dual tone (Satin + Black)
Handle: G10
Blade length: 85mm.
Blade thickness: 6mm.
Total length: 150mm.
Weight: 182g.
Sheath: In Kydex, with attachment
Packaging: Cardboard box with Boker Plus logos
Notes: Design by Midgards MesserBO-02BO091 -
Benchmade - Flyway - Small Game Hunter Knife - CPM-S90V & OD Green G10 - 15700-01 - knife
The Flyway has proven to be the ultimate fixed blade for offshore game and waterfowl. The 15700-01 offers the ultimate in edge retention thanks to CPM-S90V steel, which will keep you in the field well into the season. To change things up even further, the ergonomic handle now includes OD green G10 gauntlets with orange rings for visibility, while the orange Boltaron sheath is perfect for attaching to a chest rig or stuffing into a backpack.
Intended Use: Hunting/Light Utility
Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S90V stainless steel (59/61HRC)
Blade finish: Satin finish
Handle: G10
Blade length: 68mm.
Blade thickness: 2.3mm.
Total length: 177mm.
Weight: 58.5g.
Sheath: Boltaron
Packaging: Cardboard box with Benchmade logos
Notes: -BM-15700-01 -
Spartan Blades - Spartan-Ka-Bar - FDE MagnaCut & Leather - SB54DEBKLTBK - knife
On December 9, 1942, during the Second World War, KA-BAR presented a knife to the United States Marine Corps hoping it would become the standard weapon. In collaboration with the Marine Supply Department, the project was revised, and production began on an improved combat and utility knife.
During the war, USMC KA-BAR knives gained such recognition for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, and the wars in Iraq and Afghanistan.
In 2019, KA-Bar partnered with Spartan Blades to form Pineland Cutlery. CEO John Stitt aimed to create a "KA-BAR" with improved strength, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.
CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries and specifically designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: ZrN Flat Dark Earth
Handle: Kraton G with stainless steel 301 guard and tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Black leather
Packaging: Cardboard box with Spartan Blades logos
Notes: Please note that the Flat Dark Earth (FDE) coated blade, when inserted or removed from the leather sheath, may show streaks or stains due to the dye used for the sheath. The blade can be cleaned with petroleum or acetone, re-oiled (e.g., with WD40 or light mechanical oil), and dried with a clean cloth to restore the original coating finish.SB54DEBKLTBK -
Spartan Blades - Spartan-Harsey Fighter - SBSL006BK - Knife
Produced in Olean, NY, in collaboration with the skilled people at KA-BAR knives, the Spartan-Harsey Fighter is born from the partnership between William W. Harsey Jr. and Spartan Blades. The intention behind this knife was to combine the blade of a US military combat/utility knife with the contoured handle that has become a hallmark of Mr. Harsey's designs. This knife is a no-nonsense combat blade.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: 1095 carbon steel 56/58HRC
Blade Finish: Black Powder Coating
Handle: Injection-molded Thermoplastic
Blade Length: 155mm
Blade Thickness: 4.9mm
Overall Length: 292mm
Weight: 334g
Sheath: Thermoplastic, with belt attachment and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by William W. Harsey Jr. - The Professional Grade series with Silver packaging identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience to keep prices affordable for the public without sacrificing USA-made production.SBSL006BK -
Spartan Blades - Machai knife Green - Fixed Blade Pro Grade- SBSL002BKGR - Knife
Machai - A fitting name for this large cutting tool. In Greek mythology, the Machai were the demons (spirits) of battle and combat.
The high weight and recurved profile of this flat ground blade make it an excellent hatchet. The Machai has a full-tang construction and a handle that ensures a forward balance in the user's hand.
The textured Micarta canvas ergonomic handle ensures a secure and comfortable grip, whether wet or dry. Made by the good people at KA-BAR Knives; in Olean, NY, USA.
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: in 1095 carbon steel 56/58HRC
Blade finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade length: 165mm.
Blade thickness: 4.8mm.
Total length: 295mm.
Weight: 308g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E compatible belt attachments and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by Iovito - The Professional Grade series with a Silver-colored box identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with the production experience of Ka-Bar to keep public prices affordable without having to give up a made in USA production.SBSL002BKGR -
Benchmade - Raghorn knife - CPM-S30V - OD Green G10 - 15600-01 - knife
For the big game hunter who tracks their prey through the woods, every gram counts. Try the brand new 15600-01, an ultra-lightweight fixed blade knife designed to process large animals.
Building on the ergonomics of the 15600 model, the 15600-01 features an OD Green G10 handle that fits well in the hand and a reliable CPM-S30V stainless steel.
Intended use: Hunting / Light Utility
Type of production: Industrial
Country of production: USA
Blade: in CPM-S30V stainless steel (58-60)
Blade finish: Satin
Handle: G10 Green
Blade length: 116mm.
Blade thickness: 2.3mm.
Total length: 2.28mm.
Weight: 45g.
Sheath: kydex
Packaging: Cardboard box with Benchmade logos
Notes: -BM-15600-01 -
Fox - TRIBAL K Fixed Karambit by Doug Marcaida - FX-803 - Knife
Intended Use: Tactical / Military
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Black Idroglider
Handle: G10
Blade length: 78mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 97g.
Sheath: kydex, with double Ulti-Clip attachment system
Packaging: cardboard box with Fox logos
Notes: Design by Doug MarcaidaFX-803 -
Fox - Tokala Fixed Knife - Bison Micarta - FX-105MB - Design by Reichart Markus - knife
Intended use: Utility / Tactical / Outdoor
Type of production: Industrial
Country of production: Italy
Blade: Niolox 59/61HRC stainless steel with Black Idroglider finish
Handle: Bison Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balancing: advanced by 1cm
Weight: 235g.
Sheath: leather
Packaging: cardboard box with Fox logos
Note: -FX-105MB -
ExtremaRatio - Col Moschin Paper Knife - with plexiglass base - paper knife
COL MOSCHIN Paper Knife is a paper knife whose shape is faithfully derived from one of the most iconic knives of our production, the Col Moschin model, adopted by the 9th Parachute Assault Regiment "Col Moschin".
This tool is part of a larger collection.
COL MOSCHIN Paper Knife is not only a decorative and evocative accessory, but also has all the tactical characteristics that are typical of Extrema Ratio's DNA.
It is equipped with nylon grips and a sturdy steel blade that takes up the same shape as its older brother.
COL MOSCHIN Paper Knife is very practical and convenient for the office or home studio and is also perfect as an original gift idea.
Intended use: Collection/Tactical/Military
Country of production: Italy
Blade: NOT SHARP stainless steel
Blade Finish: MIL-C-13924 Bluing
Handle: nylon
Blade length: 100mm.
Blade thickness: 1.5mm.
Total length: 180mm.
Weight: 45g.
Scabbard: -
Packaging: Cardboard box with Extrema Ratio logos with hand-polished plexiglass base in BLACK color with engraved Extrema Ratio logo
Note:ER-COL-TC -
Benchmade - SOCP Fixed Blade Trainer - 185T - unsharpened training knife
Proper preparation is the key to effective use of any defensive system. This is the mission of the 185T SOCP Fixed Blade Trainer, designed to perfectly mimic the weight and feel of a real sharp counterpart, but with a high visibility red 440C unsharpened blade and a G10 handle.
Intended Use: Training/Tactical
Type of production: Industrial
Country of Production: USA
Blade: unsharpened, 440C stainless steel
Blade treatment: High-visibility coating
Handle: G10
Blade length: 174mm.
Blade thickness: 3.8mm.
Length closed: 114mm.
Total length: 291mm.
Weight: 186g.
Sheath: Thermoplastic polymer
Packaging: Cardboard box with Benchmade logos
Notes: training knife with unsharpened bladeBM-185T -
Fox - PIKAL - Folding Karambit by Giuliano Ron - FX-826 - Knife
The Fox Pikal is a folding tactical knife specifically designed for martial arts practitioners. It was created with the collaboration of the personal defense instructor Giuliano Ron who, after two years of severe tests, combined the advantages of the Pikal style (handle with blade pointing down and edge facing the person) with the Karambit (rear ring for the index)
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Black Idroglider
Handle: G10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 182mm.
Weight: 113g.
Clip: reversible and removable, in painted stainless steel
Packaging: Cardboard box with Fox logos
Notes: Design by Giuliano RonFX-826 -
Fox - TRIBAL K - Karambit Knife by Doug Marcaida - FX-802
Intended use: Tactical / Collection
Production type: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Black Idroglider
Handle: G10
Blade length: 50mm of cutting edge and 70mm of blade
Blade thickness: 3mm
Overall length: 150mm
Weight: 105g
Clip: Steel
Packaging: Cardboard box with Fox logos
Notes: Design by Doug MarcaidaFX-802 -
Lionsteel - T6 - CPM-3V Old Black and Micarta Black - T6B 3V CVB - knife
T6 is the latest addition to the fixed blade family, in terms of size it ranks between the M7 and the T5 and is the knife for every strategic and field use, the perfect companion for every outdoor experience. It features a powerful CPM-3V steel blade and is equipped with a SOLID® handle, made by four-axis milling of a single block of Canvas Micarta, which ensures a firm and secure grip.
The T6 has an aggressive profile and is therefore particularly suitable for those who need a tactical tool that is rugged, reliable and easy to handle. Supplied with Kydex sheath equipped with Cordura implant for easy and secure fit, reversible and with M.O.L.L.E. system.
Intended Use: Utility
Production type: Industrial
Country of manufacture: Italy
Blade: full tang, made of CPM-3V sintered carbon steel
Blade finish: Old Black (blacwashed)
Handle: Canvas Micarta
Blade length: 148mm.
Blade thickness: 5.5mm.
Total length: 295mm.
Weight: 274g.
Sheath: kydex and cordura
Packaging: cardboard box with Lion Steel logos
Notes: -LS-T6B3VCVB -
MoraKniv - Wit - Black Blade and Ash Wood - 14084 - knife
A reliable, full tang bushcraft knife that can be used in a wide variety of situations during your next long-duration adventure. The ergonomic polished ash wood handle allows for a variety of grips that can be useful. The black recycled Swedish stainless steel blade, with its full curvature and drop point, allows you to get the most out of your experience. The back of the blade is also compatible with a fire starter.
The unique, carefully selected ash wood handle features a functional grip bead and a 2.5 mm thick black blade made of recycled Swedish stainless steel, providing strength and stability with every cut. Thanks to the design of the blade and handle, the knife is well balanced and specially developed for precision work. The black PC coating creates a balanced contrast between the bright ash wood and the polished edge of the blade. The vegetable-tanned leather sheath has a belt loop and protects the cutting edge from surfaces that can dull the knife.
Intended use: hiking / bushcraft / light utility
Type of manufacture: semi-crafted
Blade: full tang, recycled Swedish stainless steel
Country of manufacture: Sweden
Handle: ash wood
Blade length: 103mm.
Blade thickness: 2.5mm.
Total length: 213mm.
Balance: advanced
Weight: 128g.
Sheath: vegetable-tanned leather
Notes: scandi-type sharpeningM14084 -
MoraKniv - Stainless Companion Bushcraft - OD Green - 14065OD - knife
The Mora Companion has always been known by all as one of the most popular knives in the world of bushcraft, both for its reliability and light weight and for its attractive price. In fact, its low weight and minimal bulk make it the perfect choice for both demanding hikes and simple Sunday outings.
Intended use: hiking / hunting / sports / fishing
Type of production: industrial
Blade: Sandvik 12C27 57/58HRC stainless steel
Country of manufacture: Sweden
Handle: polypropylene with non-slip rubber inserts
Blade length: 104mm.
Blade thickness: 2.5mm.
Total length: 218mm.
Balance: backward
Weight: 116g.
Sheath: polypropylene
Notes: scandi-type sharpeningM14065OD -
MoraKniv - Stainless Companion Bushcraft - Desert - 14065DE - knife
The Mora Companion has always been known by all as one of the most popular knives in the world of bushcraft, both for its reliability and light weight and for its attractive price. In fact, its low weight and minimal bulk make it the perfect choice for both demanding hikes and simple Sunday outings.
Intended use: hiking / hunting / sports / fishing
Type of production: industrial
Blade: Sandvik 12C27 57/58HRC stainless steel
Country of manufacture: Sweden
Handle: polypropylene with non-slip rubber inserts
Blade length: 104mm.
Blade thickness: 2.5mm.
Total length: 218mm.
Balance: backward
Weight: 116g.
Sheath: polypropylene
Notes: scandi-type sharpeningM14065DE -
MoraKniv - Stainless Companion Bushcraft - Black - 14065BK - knife
The Mora Companion has always been known by all as one of the most popular knives in the world of bushcraft, both for its reliability and light weight and for its attractive price. In fact, its low weight and minimal bulk make it the perfect choice for both demanding hikes and simple Sunday outings.
Intended use: hiking / hunting / sports / fishing
Type of production: industrial
Blade: Sandvik 12C27 57/58HRC stainless steel
Country of manufacture: Sweden
Handle: polypropylene with non-slip rubber inserts
Blade length: 104mm.
Blade thickness: 2.5mm.
Total length: 218mm.
Balance: backward
Weight: 116g.
Sheath: polypropylene
Notes: scandi-type sharpeningM14065BK -
Fox - Native Bushcraft - Idroglider D2, Black Micarta - FX-611 - single edge fixed knife, made in Italy
The Fox Native is a bushcraft knife suitable for all outdoor activities. Perfect companion for all wilderness adventures, thanks to the 17.5 cm - 6.89" blade made of D2 carbon steel, it is easy to sharpen using even minimal resources, making this knife always perform in all situations. The handle is made of durable Micarta: ergonomic and easy to handle, also equipped with holes for Paracord to achieve a higher level of safety during demanding work.
Intended Use: Hiking / Bushcraft / Utility
Production type: Industrial
Country of manufacture: Italy
Blade: full tang in Bohler K110 (D2) steel at 60/61HRC
Blade treatment: Black Idroglider Stonewashed
Handle: Micarta
Blade length: 175mm.
Blade thickness: 4mm.
Total length: 300mm.
Balance: Advanced
Weight: 375g.
Sheath: leather, belt, ambidextrous, for horizontal or vertical carry
Packaging: cardboard box with Fox logos
Notes: Design by Andrea TodescoFX-611 -
Zero Tolerance - ZT0006 - CPM-3V - OD Green G10 - fixed blade, single edge knife, Made in USA
Intended Use: Tactical / Sporting
Type of production: Industrial
Country of manufacture: USA
Blade: full tang in CPM-3V carbon steel
Blade treatment: Microbead blasting and Cerakote protective treatment
Handle: G10 OD Green with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos.
Notes: -ZT0006 -
Boker Plus - Desertman - 12C27 Sandy Brown TPR - 02BO083 - fixed blade knife single edge
Intended Use: Outdoor / Bushcraft / Light Utility
Production type: Industrial
Country of Production: Taiwan
Blade: hidden tang made of Sandvik 12C27 stainless steel
Blade Finish: Titanium coating
Handle: Injection molded polymers (brown TPR and black GRP)
Blade length: 115mm.
Blade thickness: 4.2mm.
Total length: 242mm.
Weight: 210g.
Sheath: polymer and Nylon
Packaging: cardboard box with Boker Plus logos
Notes: -BO-02BO083 -
Fox - Veleno - Black Top Shield - FX-596 - Single Edge Fixed Blade Knife - Made in Italy
The knife echoes one that Fox Knives created at the request of GIS, Gruppo di Intervento Speciale dell'Arma dei Carabinieri, Italian special forces. The design of Veleno stems from a reinterpretation of the ceremonial dagger made more appealing thanks to the materials: blade in N690 steel with Top Shield® finish and aluminum handle finished in black color that recalls the color that distinguishes the weapon group.
Intended Use: Tactical / Collection
Production Type: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co
Blade treatment: Black Top Shield
Handle: Aluminum
Blade length: 170mm.
Blade thickness: 6mm.
Total length: 300mm.
Weight: 223g.
Sheath: handmade, vegetable-tanned Tuscan leather
Packaging: cardboard box with Fox logos
Notes: numbered on box and on bladeFX-596 -
Fox - Toa - Fixed Karambit by Jared Wihongi - FX-652 - Knife - Made in Italy
Intended Use: Tactical / Military
Type of production: Industrial
Country of Production: Italy
Blade: full tang in stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 180mm.
Weight: 120g.
Sheath: kydex, with Tek-Lok-like attachment
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)FX-652 -
Fox - Moa - Fixed Karambit by Jared Wihongi - FX-651 - Knife - Made in Italy
Intended Use: Tactical / Military
Production type: Industrial
Country of Production: Italy
Blade: full tang in stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 180mm.
Weight: 130g.
Sheath: kydex, with Tek-Lok-like attachment
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)FX-651 -
Cold Steel - Leatherneck Bowie - D2 Black - FX-LTHRNK - knife
Intended Use: Tactical / Heavy Duty
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Black Powder Coating
Handle: made of Griv-Ex polymer, with steel pommel
Blade length: 267mm.
Blade thickness: 5mm.
Total length: 387mm.
Balance: Advanced
Weight: 474g.
Sheath: Secure-Ex ABS
Packaging: Cardboard box with Cold Steel logos
Notes: -CSFX-LTHRNK -
Fox - AKA Spear Point by D. Simonutti - Elmax Top Shield - FX-554B - knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Italy
Blade: full tang, stainless steel Elmax 60/62 HRC
Blade treatment: Black Top Shield
Handle: G-10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 140mm.
Weight: 60g.
Sheath: made of Kydex, with Ulti-Clip attachment
Packaging: cardboard box with Fox logos
Notes: Design by Denis SimonuttiFX-554B -
Fox - AKA Drop Point by D. Simonutti - Elmax Top Shield - FX-553B - knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Italy
Blade: full tang, stainless steel Elmax 60/62 HRC
Blade treatment: Black Top Shield
Handle: G-10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 140mm.
Weight: 65g.
Sheath: made of Kydex, with Ulti-Clip attachment
Packaging: cardboard box with Fox logos
Notes: Design by Denis SimonuttiFX-553B -
Boker Plus - Scalpel by Alexander Krava - D2 - 02BO072 - neck knife
Surgical precision, a clean cut, and a sense of pride in what you've achieved: the Böker Plus scalpel knife by Alexander Krava provides the dexterity needed for everyday, delicate cutting tasks. The compact all-steel construction in D2 is modeled on a scalpel but convinces as an absolutely practical neck knife.
The bulbous blade has a satin finish and cuts through cardboard boxes with equal concentration and effortlessness, and steps in for crafts where scissors can go no further. Epoxy handle inserts and serrations on the wrist rest increase control while working. Supplied with a black ball chain and custom-made Kydex sheath.
Intended Use: Tactical / CQB
Production type: Industrial
Country of manufacture: Taiwan
Blade: D2 steel
Blade treatment: Stone Washed
Handle: D2 steel
Blade length: 42mm.
Blade thickness: 2.6mm.
Total length: 125mm.
Balance: -
Weight: 14g.
Sheath: Neck, in Kydex
Packaging: Cardboard box with Boker Plus logos
Notes: Design Alexander KravaBO-02BO072 -
ExtremaRatio - S-Thil Stone Washed - knife
Extrema Ratio S-THIL STONE WASHED is a tactical backup knife with monolithic construction machined from a single piece of 5 mm thick BOHLER N690 steel, developed in collaboration with Thilo designer Arnd Schiller.
The blade, a spear point type, is hardened to 58 HRC in order to achieve the best balance of edge retention and strength, features a false counterbore at the top that enhances penetration and point work characteristics, and has a full-length groove (fuller) that flows elegantly from the blade to the handle. The blade is milled integrally to the knife to enhance its compactness and lightness, maintaining a minimal thickness while still having a profile reminiscent of the classic Extrema Ratio handle.
That profile goes to form two small guards and a comfortable thumb rest to prevent the hand from slipping towards the blade. On the end are a skull crusher with a diamond-shaped tip and a slot that allows a wrist strap to be attached to the knife or the handle to be fitted with paracord coiling.
The molded nylon sheath is designed to be extremely flat with very small side dimensions to make it as compact as possible. The design of the knife makes it ambidextrous, allowing it to be inserted into the sheath with the blade cutting edge to the right or left. The double retention system integral to the sheath consists of four pressure elements that work only two at a time, depending on right/left-handed use, while the nylon textile part has a button that allows the knife to be secured to the sheath.
The end of the sheath has a hole to expel liquids or debris inside. The ability to attach belt clip, ulticlip, malice clip makes it extremely versatile. You can also attach the sheath to the M.O.L.L.E. system by braiding the paracord.
Intended Use: Tactical/Multi-role
Production type: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Stonewashed
Handle: Steel N690Co 58HRC
Blade length: 119mm.
Blade thickness: 5mm.
Total length: 230mm.
Weight: 123g.
Sheath: Nylon
Packaging: cardboard box with Extrema Ratio logos
Notes: -ER-STHIL-SW -
ExtremaRatio - K1 Dobermann knife - XXV Anniversary - Limited Edition
This special edition in 250 pieces, proposed on the occasion of the 25th anniversary of the brand, maintains the shape of the original, but with materials and finishes corresponding to the current production.
The K1 is equipped with a modified spear point profile blade, characterized by a tip that combines the 40° "tanto" profile with the more traditional European one, creating a sharp but very solid hybrid which, with the false false edge, makes it particularly effective in jab. The bevel is high, allowing for a very effective cutting angle.
The blade is immediately recognizable by the fenestration at the heel, which allows for considerable lightening without compromising its strength. It is made of Böhler N690 steel, with heat treatments that bring its hardness to 58 HRC for the best combination of edge hold and resistance. The finish is satin with flat grinding.
The handle, in anodized Anticorodal alloy, compared to the original presents the lightening on the sides that make the Extrema Ratio knives immediately distinguishable, but maintains the arched shape and the lateral "bellies" of the K1, offering an excellent grip both in the "saber" than in the "reverse" grip.
The terminal part of the handle curves to form a sort of hook which allows particularly easy and rapid extraction from the scabbard, while the tang protrudes from it with a triangular cusp which acts as a glass breaker with a slot which allows the knife to be equipped of lasso.
The leather scabbard faithfully reproduces the original while maintaining both the qualities of ease and speed of extraction. The carry can take place in an upside-down axillary position, horizontally on the belt or tactically on the thigh.
The K1 equipment is completed with a polypropylene case , complete leather sheath and underarm shoulder strap.
WEIGHT g.: 493
WEIGHT OZ.: 17.39
BLADE LENGTH (MM): 210
BLADE LENGTH (IN): 8.26
TOTAL LENGTH (MM): 351
TOTAL LENGTH (IN): 13.81
BLADE THICKNESS (MM): 6.3
BLADE THICKNESS (IN): 0.25
BLADE MATERIAL: BÖHLER N690 STEEL (58HRC)
BLADE FINISH: SATIN
BLADE GRINDING: FLAT EDGE
HANDLE MATERIAL: ANODIZED ANTICORODAL ALUMINUMER-K1-D-LE -
La Cantina - Mini Jones custom knife - Sleipner Steel - Black Birch and Fatcarbon - handmade knife
Production Type: Artisan
Blade Production: Italy
Blade: Sleipner steel at 60HRC
Blade Finish: PVD
Handle: Black Stabilized Birch with FatCarbon Darkmatter guard and carbon pins
Blade length: 115mm.
Blade thickness: 6mm.
Total length: 244mm.
Balance: set back 3cm from the guard branch
Weight: 265g.
Scabbard: handcrafted and hand-stitched leather
Package and certificate: cordura pouch and certificate of authenticity
Notes: unique knife and handcrafted for Coltelleria Collini in Busto Arsizio - no. 253LC-MJ-BNF -
Cold Steel - Leatherneck Bowie - Lynn Thompson Limited Edition - 39LSFCAA - knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Stonewashed
Handle: made of Griv-Ex polymer, with steel pommel
Blade length: 267mm.
Blade thickness: 5mm.
Total length: 387mm.
Balance: Advanced
Weight: 474g.
Sheath: Secure-Ex ABS
Packaging: Cardboard box with Cold Steel logos
Notes: Limited and numbered edition with serial number engraved on blade and with Lynn Thompson's autograph on boxCS39LSFCAA -
Boker Plus - Micro Tracker Knife by Dave Wenger - 02BO076 - knife
The distinctive design, the Tracker concept with two separate blades, the impact-resistant 1095 carbon steel and the remarkable price-performance ratio quickly made Dave Wenger's Boker Plus Mini Tracker a top seller in the bushcraft and outdoor scene. While the front of the larger Tracker variants is primarily suitable for chopping and splitting, the blade shape of the smaller size of the new Boker Plus Micro Tracker shows completely different advantages and qualities.
The Micro Tracker shares the benefits of two sharpening angles on one blade with its bigger brothers. Additionally, the front half of the blade in the smaller format is great for working on a chopping board and the sturdy tip is great for opening boxes in everyday use. The small nose, which separates the two grinds, pulls hard when cutting in soft materials and is predestined for cutting ropes, lines and belts.
The field and 3D archer appreciates the compact size, powerful point and archaic look when working out the wrong arrows. The Boker Plus Micro Trapper has the same indestructible materials and finish as the Mini Tracker.
The three hollow brass studs carefully recessed and chamfered into the handle add visual flair. Supplied with a belt adapter and sheath
Intended use: Utility
Type of production: Industrial
Country of production: Taiwan
Blade: 1095 steel ful tang
Blade finish: powder coat
Handle: Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 190mm.
Weight: 159g.
Sheath: Kydex
Packaging: cardboard box with Boker Plus logos
Notes: Design by Dave WengerBO-02BO076 -
ExtremaRatio - S-Thil Black Warfare knife - XXV Anniversary Special Edition - knife
Extrema Ratio S-THIL Black Warfare, a special version of the S-THIL model, is a backup knife with a monolithic structure machined from a single piece of 5 mm thick BOHLER N690 steel, developed in collaboration with the designer Thilo Arnd Schiller. The spear point type blade is hardened to 58 HRC in order to obtain the best balance between edge retention and strength, has a false edge in the upper part which enhances the characteristics of penetration and tip work, and is equipped with a Full length furrow flowing elegantly from blade to grip.
The blade is milled integrally with the knife to enhance its compactness and lightness, maintaining a minimum thickness even with a profile that recalls the classic Extrema Ratio handle. This profile forms two small guards and a comfortable thumb rest in order to prevent the hand from slipping towards the blade. On the end there is a skull crusher with a diamond-shaped tip and a slot that allows you to attach a wrist strap to the knife or to equip the handle with paracord winding.
The special Black Warfare version uses the innovative and original Geotech Camo pattern, created by laser engraving. The molded nylon sheath has been designed to be extremely flat and with very small lateral dimensions, in order to make it as compact as possible. The design of the knife makes it ambidextrous, allowing it to be inserted into the sheath with the cutting edge of the blade to the right or left. The double retention system integral with the sheath is made up of four pressure elements that work only two at a time, depending on right/left use, while in the nylon textile part there is a button that allows you to secure the knife to the sheath . The end of the sheath has a hole that allows you to expel liquids or residues inside. The possibility of applying belt clips, ulticlips, malice clips makes it extremely versatile. It is also possible to hook the sheath to the M.O.L.L.E. system. weaving the paracord lanyard.
The S-thil Black Warfare is supplied in an IP67 certified watertight Polypropylene technical case, with pressurization valve, resistant to atmospheric agents, dust and shocks. Inside there are also the Nylon sheath, the double ULTICLIP and the double grain sharpening plate (ceramic abrasive and synthetic diamond).
Intended use: Tactical / Multirole
Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel hardened to 58HRC
Blade treatment: BURNISHING MIL-C-13924 GEOTECH CAMO
Handle: N690 steel
Blade length: 119mm.
Blade thickness: 5mm.
Total length: 230mm.
Weight: 123g.
Sheath: in Kydex, with double multiposition ULTICLIP attachment clip
Packaging: Polypropylene case with S-Thil / Extrema Ratio logos
Notes: exclusive briefcase to celebrate the company's 25th anniversaryER-STHIL-BWLE -
Viper - Lille 2 Fixed Knife by Vox - Elmax Orange/Black G10 - VT4024GBO - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Stonewashed
Handle: G10 Two-tone
Blade length: 70mm.
Blade thickness: 3.5mm.
Total length: 170mm.
Weight: 105g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesVT4024GBO