Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Intended use: Chopper / Machete

Type of production: Industrial
Production Lama: Italy
Blade: stainless steel, hardened to 54HRC N690Co
Treatment Lama: Testudo
Handle: Forprene
Blade length: 280mm.
Blade thickness: 4mm.
Length closed: -
Overall length: 450mm.
Thick when closed: -
Balancing: -
Weight: 370g.
Closing: -
Clip: -
Sheath: Nylon with attacks belt and MOLLE type
Packaging: Cardboard box with logos Extrema Ratio
Notes: Studied and designed to sever the thick vegetation broadleaf, typical of tropical forests and rainforests.

WAKI XXV ANNIVERSARIUM LIMITED EDITION is a limited series version of only 150 pieces that keeps all the features of the famous Waki model intact.

This product is an elaboration of the Japanese Wakizashi sword, a typical blade 30 to 60 centimeters long, which the Samurai always carried in contact with the body, where the Katana was carried exclusively in battle.

The blade has the classic Japanese Tanto profile and is made of Böhler N690 steel with heat treatments that raise its hardness to 58 HRC for the best combination of edge hold and strength. The blade, with flat rounding, features a precious satin finish.

The handle, in black coloring, is made of Forprene while The black-colored Cordura sheath is equipped with a MOLLE system that ensures safe carrying of the razor-sharp blade by protecting it from shocks that could reduce its efficiency.

WAKI XXV ANNIVERSARIUM LIMITED EDITION comes in an IP67-certified watertight Polypropylene technical case with pressurization valve that is weather, dust and shock resistant. Also inside is a metal plaque with the numbering of the limited series of 150 and a commemorative coin of the twenty-fifth Extrema Ratio anniversary.

Intended Use: Collection / Tactical / Machete

Production type: Industrial
Country of manufacture: Italy
Blade: N690Co stainless steel at 58HRC
Blade Treatment: Satin finish
Handle: Forprene
Blade Length: 297mm.
Blade thickness: 6.5mm. tapering to 4mm from the handle.
Total length: 456mm.
Weight: 384g.
Sheath: cordura, compatible with M.O.L.L.E. systems.
Packaging: polypropylene case with numbered metal plaque and commemorative coin with Extrema Ratio logos
Notes: Limited and numbered edition made in only 150 pieces

KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Good
* Commercially available No
* Sharpening: Original
* Marks on the blade: Some scratches on the pommel, blade and guard in very good condition
* Marks on handle: Some assembly inaccuracies near the pommel, adhesive residues
* Packaging: NO
* Scabbard: Leather, handcrafted, original with some marks due to age and storage
* Manuals, Certificates and Warranties: YES
* Checked and certified by our in-house laboratory

Knife handcrafted by Master C.IC. (Corporazione Italiana Coltellinai - Italian Knife-makers Guild) Livio Montagna. Reproduction of one of the various versions of the Arkansas Toothpick, legendary frontier knife of the American 1800s. Famous, often infamous, it generally has a 30 to 50 cm blade, rather narrow and sometimes symmetrical, dagger-style. Used mainly for hunting and personal defence.

Livio Montagna's version is aesthetically very similar to the Toothpick used in Expandables 2.

The knife is distinguished by an excellent overall balance, allowing control and precision in use. The finish is of a good standard.

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: hardened 440C steel at 58/59 HRC
Blade finish: satin finish
Handle: Ebony - 416 stainless steel guard and pommel
Blade length: 305mm.
Blade thickness: 6mm.
Total length: 445mm.
Weight: 722g. (960g. including scabbard)
Sheath: Handcrafted, leather, hand-stitched
Packaging: NO
Notes: -

The Power Eagle 12 is a true force multiplier

For hundreds of years, people have survived by using machetes as a source of income, food, shelter and self-defense tool. TOPS designer Leo Espinoza has taken this tool, combined with a kukuri and a bolo, and enhanced it with highly flexible, impact-resistant steel. The bushcrafter, explorer, or outdoor expert can use it for long periods of time without much effort or fatigue, thanks to the extremely ergonomic, comfortable, and indestructible handle. 

Whether you use it to clear a trail, build a shelter, or for military or survival applications, this is definitely an important tool.

TOPS POWER EAGLE 12

Intended use: machete / heavy utility

Type of manufacture: semi-industrial
Blade: full tang in 1095 carbon steel
Country of Production: USA
Handle: Micarta
Blade length: 300mm.
Blade thickness: 6.3mm.
Total length: 448mm.
Balance: advanced
Weight: 740g.
Sheath: made of Nylon, simultaneously holds the Power Eagle and ALRT XL Tanto
Notes: -

TOPS ALRT XL TANTO

Intended use: light utility / neck knife 

Type of production: semi-industrial
Blade: full tang in 1095 carbon steel
Country of Production: USA
Handle: 1095 carbon steel
Blade length: 35mm.
Blade thickness: 4mm.
Total length: 135mm.
Weight: 89g.
Sheath: thermoplastic, for neck
Notes: -

Intended Use: Tactical/Military/Survival

Type of production: semi industrial
Blade: full tang in carbon steel 1095 58HRC
Blade finishing: Camouflage
Handle: Micarta
Blade length: 260mm.
Blade thickness: 6mm.
Total length: 425mm.
Balance: Advanced
Weight: 735g.
Sheath: Nylon
Notes: Design By Xtreme Survivalist & Adventurer EJ Snyder.

From a private collection, this is a model no longer in production that reproduces the Argentine national knife: a blade with a simple shape that is ideal for almost everything from hunting, repair of harnesses and saddles, cooking and eating meals.

In very good condition, it shows some signs of light oxidation on the blade. Checked and certified by our internal laboratory Coltelleria Collini.

Intended use: hunting, cooking

Type of production: industrial
Blade: carbon steel 1090
Country of production: India
Handle: Malaysian Sai Wood
Blade length: 300mm.
Blade thickness: 5mm.
Total length: 447mm.
Balance: forward, 4cm. from the handle
Weight: 542g. (709G. scabbard included).
Scabbard: leather, with metal trim
Notes: -

Designed by Dan Maragni, the Ontario SP53 Bolo Knife features a 25cm bolo-style blade made of 5160 steel with an epoxy powder coating. The Bolo SP53 knife comes complete with a MOLLE compatible black tactical sheath and is made in the USA.

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 Carbon Steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 257mm.
Blade thickness: 6.4mm.
Total length: 384mm.
Balancing: advanced
Weight: 940g.
Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 250mm.
Blade thickness: 6mm.
Total length: 380mm.
Balancing: advanced
Weight: 425g.
Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

Intended use: Tactical / Military / Survival

Type of production: semi industrial
Blade: full tang in 1095 58HRC carbon steel
Blade finish: Black Traction Coating
Handle: Micarta
Blade length: 200mm.
Blade thickness: 6mm.
Total length: 345mm.
Balancing: advanced
Weight: 449g.
Sheath: Nylon
Notes: design by Laci Szabo

Intended use: Tactical / Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang, in 5160 carbon steel
Blade finish: Cerakote
Handle: Micarta
Blade length: 254mm.
Total length: 406mm.
Balancing: Advanced
Weight: 655g.
Sheath: Nylon and Polyester
Packaging: Cardboard box with Buck logos
Note: -

USED KNIFE, TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased and used
* Condition: In good overall condition (see accompanying photos)
* Commercially available 
* Sharpening: Resharpened by our workshop, also clean oxidation which has affected some portions of the edge, which is however back in working order
* Marks on blade: YES
* Marks on handle: YES, various superficial oxidation stains
* Box: Present and original, in cardboard
* Scabbard: in good condition
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: Hunting / Outdoor

Production type: Industrial
Blade production: Taiwan
Blade: Stainless steel 440C differentiated hardening 58/45HRC
Blade Treatment: Mirror polished
Handle: Brass, ebony wood and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Scabbard: Leather
Packaging: Cardboard box
Notes: Accompanied by a whetstone.

The Outback is a clear homage to the knife used by Paul Hogan in the Mr. Crocodile Dundee films, in fact it faithfully follows its shape and dimensions.

Intended use: Sports / Hunting / Collection

Type of production: Industrial
Country of production: Taiwan
Blade: carbon steel O-1
Blade treatment: satin finish
Handle: micarta, with brass guard
Blade length: 269mm.
Blade thickness: 7.6mm.
Total length: 399mm.
Balancing: advanced
Weight: 483g.
Sheath: in ABS, of the SecurEx type
Packaging: cardboard box with Cold Steel logos
Note: -

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton with steel guard
Blade length: 245mm.
Blade thickness: 6.8mm.
Total length: 380mm.
Balancing: advanced
Weight: 620g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 255mm.
Blade thickness: 6.5mm.
Total length: 385mm.
Balancing: advanced
Weight: 642g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with Ontario Knife Company logos
Note: -

Intended use: Tactical / Utility

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflon coated
Handle: Ultramid
Blade Length: 155mm.
Blade thickness: 5mm.
Total Length: 287mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 338g.
Sheath: kydex

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Manicure: wood
Finishes: Brass
Blade length: 260 mm.
Blade thickness: 9.4 mm.
Total length: 400 mm.
Karda: 110 mm.
Chakmak: 110 mm.
Weight: 426g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Covered
Aunlo-Bal: -
Handle: Wood
Blade length: 230mm.
Blade Thickness: 11mm.
Overall length: 395mm.
Karda: horn length. tot. 12mm.
Chakmak: horn length. tot. 12mm.
Weight: 690g.
Sheath: wood and leather
Notes: Nepalese original knife made entirely by hand

Kukri Artisan - Ceremonial Long Aluminum 027 - knife

Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Kukri Artisan - Ceremonial Long Aluminum 027 - knife

Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Collini Cutlery is the official distributor for Italy of tactical knives / collection made in the USA Chris Reeve

Made at the Blade Show in 2014 in a limited edition of only 500 pieces worldwide, the impofu (eland antelope, Lungu in Zulu) is a fixed blade knife largest and most impressive ever produced by Chris Reeve.

Use: Collection / Heavy Utility

Type of production: semi-homemade
Blade: Stainless Steel Tool CPM-3V 58 / 60HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 254mm.
Blade Thickness: 6.8mm.
Length closed: -
Overall length: 413mm.
Balancing: Advanced
Weight: 573g.
Closed: -
Sheath: Black Leather by Gfeller Casemakers
Notes: Production limited to 500 pieces worldwide - Certificate of Authenticity and warranty

Takeshi Saji was born in 1948 in Takefu ( Fukui Prefecture ) , a city located approximately in the center of Japan and in the heart of an area for centuries devoted to the production of blades . His lab is still there, built around the oven thanks to which, for several years now , Takeshi Saji forges the steel (especially damascus) with which he made various models of traditional Japanese knives . The choice of material finishes (mostly natural ) , the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home , have earned him the prestigious title of Master .

Intended use: Collection / Sports / Machete

Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Blade: -
Handle : Wood covered with leather strip
Blade length : 265mm .
Blade thickness : 5mm.
Length closed : -
Overall length: 395mm .
Thick when closed: -
Balancing : -
Weight: 422g .
Closure: -
Clip: -
Sheath: Leather treated
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji

Takeshi Saji was born in 1948 in Takefu ( Fukui Prefecture ) , a city located approximately in the center of Japan and in the heart of an area for centuries devoted to the production of blades . His lab is still there, built around the oven thanks to which, for several years now , Takeshi Saji forges the steel (especially damascus) with which he made various models of traditional Japanese knives . The choice of material finishes (mostly natural ) , the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home , have earned him the prestigious title of Master .

Intended use: Collection / Sports / Machete

Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Blade: -
Handle: Paracord
Blade length : 285mm .
Blade thickness : 5mm.
Length closed : -
Overall length: 420mm .
Thick when closed: -
Balancing : -
Weight: 490g .
Closure: -
Clip: -
Sheath: Wood painted
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji

Intended use: Survival / Collection

Blade: stainless steel
Lama Lama production
Handle: Dark brown leather
Blade length: 290mm.
Blade thickness: 7mm.
Length closed: -
Total length: 460mm.
Balancing: advanced to 4 cm.
Weight: 1.098g.
Closure: -
Clip: -
Sheath: in leather
Notes: Official reproduction with movie license

Specifications:
Blade Length: 16"
Overall Length: 22"
Steel: 1055 Carbon Steel w/ Black Baked on Anti Rust Matte Finish
Weight: 23.4 oz
Blade Thickness: 2.8 mm
Handle: 5 5/8" Long. Polypropylene
Sheath: Cor-Ex™ Sheath

Made from tough rigid 1055 carbon steel with a strong spring temper, it's virtually unbreakable and offers the weight forward balance necessary to chop through vines, saplings, and brush and even trees with ease. What's more, its sharp point offers plenty of belly for slashing or even skinning, and in an emergency, adds to it value as an improvised self defense tool. Sold fully sharpened, and shipped with a sturdy nylon sheath, it's ready for your jungle wherever it may be.

Intended Use: Collection

Type of production: Industrial
Production Lama: China
Blade: AUS-6 stainless steel
Treatment Lama: -
Handle material: Wood and avoriolina scrimshaw printed with "The Expendables"
Blade length: 300mm.
Blade thickness: 5mm.
Length closed: -
Total length: 440mm.
Thick when closed: -
Balance: -
Weight: 675g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Guard and false gold plated brass - Warranty - Cardboard box with logos The Expendables
Notes: Exact replica behind movie licenses in the film directed by and starring Sylvester Stallone: The Expendables II (Mercenaries II)

Kukri - Gurkha Army

Nepal's national weapon and its Gurkha warriors are distinguished by their sharp curved blade in the lathe and the weight shift towards the tip that allows very effective gaiters. The grip is straight, no guard. Characteristic is the ricotta (kauri) and the leather sheath covered with two small knives (karda and chakmak).

Blade: Carbon steel
Manicure: black polished horn
Blade length: 265 mm.
Blade thickness: 10 mm.
Total length: 390 mm.
Weight: g.
Sheath: leather and wood, handmade
Notes: Every knife is handmade in Nepal and also includes two small knives.

Destination: Machete/Utlity

Type of production: Industrial
Blade Made in: Italy
Blade: stainless steel 440C
Handle: hard rubber
Blade Length: 270mm.
Blade Thickness: 3.5mm.
Total Length: 430mm.
Balance: toward the tip, at about 3cm from knife's guard
Weigth: 450g.
Sheath: Nylon
Packaging: carton box
Disegned and developed in collaboration with Alfredo Doricchi

Kukri - Operation Iraqi Freedom

Arma nazionale del Nepal e dei suoi guerrieri Gurkha, si distingue per la sua lama ricurva affilata nel latoconcavo e per lo spostamento del peso verso la punta che consente fendenti molto efficaci. L’impugnatura è diritta, senzaguardia. Caratteristico il ricasso (kauri) e il fodero di legno ricoperto di cuoioin cui sono contenuti anche due piccoli coltelli (karda e chakmak).

Lama: full tang in Acciaio al carbonio
Manicatura: Legno
Lunghezza lama: 275mm.
Spessore della lama: 10mm.
Lunghezza totale: 415mm.
Peso: 710g.
Fodero: in cuoio e legno, realizzato a mano
Note: ogni coltello e' interamente realizzato a mano in Nepal e comprende anche due piccoli coltelli.

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: single engraved, black line
Manicure: Black horned horn engraved and polished
Finishes: Brass
Blade length: 275 mm.
Blade thickness: 10 mm.
Total length: 400 mm.
Karda: 110 mm.
Chakmak: 105 mm.
Weight: 505g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Blade: Carbon steel
Conformation: Flat blade
Kauri: Discovered
Aunlo-Bal: single black line engraved
Manicure: Black horn of polished and engraved buffalo
Finishes: Brass
Blade length: 260 mm.
Blade thickness: 9 mm.
Total length: 380 mm.
Karda: 120 mm.
Chakmak: 115 mm.
Weight: 490g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Destinazione d'uso: Survival/Collezione

Lama: in acciaio al carbonio 1060
Produzione Lama Cina
Manicatura: Cuoio nero
Lunghezza lama: 290mm.
Spessore della lama: 7mm.
Lunghezza chiuso: -
Lunghezza totale: 460mm.
Bilanciatura: avanzata a 4 cm.
Peso: 820g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: edizione a tiratura limitata con firma di "Sylvester Stallone" su lama e fodero.

Intended use: Outdoor

Type of production: Industrial
Lama production: USA
Blade: 5160 carbon steel
Blade treatment: Powder Coat
Handle: Micarta
Blade length: 265mm.
Blade thickness: 4.7mm.
Total length: 425mm.
Balancing: -
Weight: 622g.
Sheath: in Nylon with MOLLE attachments.
Packaging: cardboard box with Ontario Knife Company logos
Note:

Takeshi Saji - Mikatsuki Green 270 - Knife ArtigianaleTakeshi Saji - Mikatsuki Green 270 - Craft Knife

Intended use: Collection / Sports / Machete

Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Blade: -
Handle: Paracord
Blade length: 285mm.
Blade thickness: 5mm.
Length closed: -
Overall length: 420mm.
Thick when closed: -
Balancing: -
Weight: 490g.
Closure: -
Clip: -
Sheath: Wood painted
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji

Purpose of use: Survival / Collection

Blade: Stainless Steel 420J2
Manicure: Aluminum and Paracord
Blade Length: 255mm.
Blade thickness: 5.5mm.
Handle Length: 100mm.
Total Length: 395mm.
Balance: Advanced, 2cm. From the lower guard branch
Weight: 504g.
Closure: -
Clip: -
Sheath: in leather
Notes: Compass with survival kit in the handle, in the sheath.