Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Gerber - StrongArm Fixed Black Plain - knife
Intended Use: Tactical / Hiking
Type of production: Industrial
Blade: full tang, stainless steel 420HC
Treatment Lama: Ceramic Coating
Production Lama USA
Handle material: fiberglass and nylon with rubbered anti slip polymer
Blade length: 122mm.
Blade Thickness: 5mm.
Overall length: 248mm.
Balancing: backward 1cm.
Weight: 204g.
Sheath: Nylon and polymers, MOLLE compatibile
Notes: Skullcrasher with holeG31-003654 -
Gerber - StrongArm Fixed Black - knife
Intended Use: Tactical / Hiking
Type of production: Industrial
Blade: full tang, stainless steel 420HC
Treatment Lama: Ceramic Coating
Production Lama USA
Handle material: fiberglass and nylon with rubbered anti slip polymer
Blade length: 122mm.
Blade Thickness: 5mm.
Overall length: 248mm.
Balancing: backward 1cm.
Weight: 204g.
Sheath: Nylon and polymers, MOLLE compatibile
Notes: Skullcrasher with holeG31-003648 -
Gerber - StrongArm Fixed Coyote Plain - G1058 - knife
Intended use: Tactical / Hiking
Type of production: industrial
Blade: full tang, 420HC stainless steel
Blade Treatment: Ceramic Coating
Blade production: USA
Handle: fiberglass and nylon with non-slip rubberized polymers
Blade length: 122mm.
Blade thickness: 5mm.
Total lenght: 248mm.
Balance: set back 1cm.
Weight: 204g.
Scabbard: Nylon and polymer, multi-position and MOLLE compatible.
Notes: Rear skullcrasher that integrates the hole for the wrist strap.G31-003615 -
BlackJack - Model 5 knife - A2 - Green Canvas Micarta - outdoor knife
Intended use: hunting / sports / collection
Type of production: industrial
Blade: A2 carbon steel
Production Lama: USA
Handle: Green Canvas micarta
Blade length: 140mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 270mm.
Balancing: -
Weight: 262g.
Closure: -
Clip: -
Sheath: Brown Leather
Notes: made by Bark RiverBCB5GM -
Bark River - Sandstorm - CPM154 Steel - Green Canvas - BA07150MGC - knife
Intended use: Hunting / Utility
Type of production: Semi-Industrial
Country of production: USA
Blade: CPM-154CM stainless steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 127mm.
Blade thickness: 5mm.
Total length: 244mm.
Balancing: advanced
Weight: 168g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -BA07150MGC -
Bark River - Bravo 1 Field knife - A2 Steel - Green Canvas - BA07112MGC - knife
Intended use: Outdoor
Type of production: Semi-Industrial
Country of production: USA
Blade: A2 steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 10mm.
Blade thickness: 5mm.
Total length: 230mm.
Balancing: advanced
Weight: 192g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -BA07112 -
Gerber - 05981 Fixed Blade Tactical Knife - knife
Intended use: Survival / Utility / Hiking
Type of production: Industrial
Lama production: Taiwan
Blade: full tang, in 9Cr19MoV stainless steel
Blade treatment: satin finish
Handle: rubber
Blade length: 135mm.
Blade thickness: 4.2mm.
Length closed: -
Total length: 265mm.
Thick when closed: -
Balancing: -
Weight: 206g.
Closing: -
Clip: -
Sheath: in Nylon
Packaging:
Note:05981 -
Bark River - Bravo Tope Record - Black Canvas - 10-221M-BC - knife
Intended use: Outdoor / Tactical
Type of production: semi-industrial
Country of production: USA
Blade: full tang in CPM-3V steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 195mm.
Blade thickness: 5mm.
Total length: 327mm.
Balancing: advanced
Weight: 380g.
Sheath: in leather
Packaging: Cardboard box with Bark River logos
Note: -BR-BTRB -
Chris Reeve - Mk IV 28 Year Commemorative knife
Chris Reeve - Mk IV 28 Year Commemorative knife
For 28 years, (the A2 round handled) One Piece Range of knives has been an essential part of Chris Reeve Knives. From Chris first designing the concept while serving in the South African Army in Namibia to today, these knives have been used, carried, admired and collected in all corners of the world.
An integral part of the success of this range has been Eddie Myers. Eddie was Chris's foreman when Chris was an apprentice tool and die maker. They have known each other more years than they care to count and Chris has always regarded Eddie as mentor, teacher, friend and consultant! For 25 years, Eddie has machined the blanks for our One Piece Knives. Still living in South Africa, Eddie and his wife Caroline, have provided fine service to deliver the best blanks at the best price. (There is no question that the volatility of the South African currency has helped over the years!)
Eddie and Caroline want to retire. Ed wants to buy a boat again and go fishing whenever he feels like it! This brought us to a cross-roads--do we try to source a vendor in the USA or should we simply retire a - Classic. We have decided to take the second choice--to discontinue the One Piece Range.
To celebrate the end of this era, Chris Reeve Knives offered a limited edition of 250 Commemorative Mk IVs. The Mk IV was the first iteration of the one piece concept to become known there is still call for this model which we initially discontinued in 1995. It has a 7 inch blade with a clip point and sawback. For this commemorative edition, the butt cap is engraved and polished and the sheath has a commemorative logo embossed.
Specifications
Blade Material: A2 tool steel
Blade Hardness: 55-57 RC
Blade Coating: KG Gun-Kote
Blade Length: 7" sawback blade
Blade Thickness: 0.187"
Overall Length: 12"
Handle Material: A2 Tool Steel
But Cap Material: D65S aluminum
Sheath: Leather with horizontal carry belt loop, Snap
Weight: 12.90 oz. (365 grams)
Limited Edition, only 250 pieces produced!
Handmade in the USA
One Piece Knife ConceptThe idea of the one piece knife was born while Chris was serving time in the South African Army on the Namibia/Angola border in 1979. The experiences of military service have contributed substantially to the features in these knives.
Chris realized that the ideal working knife was a tool which was strong, reliable and impervious to temperature and humidity. Extensive time has been devoted to design, and research and development to improve both the blade designs and the methods used in making the knives.
Each knife is made from a solid billet of A2 tool steel. The stock removal method results in two distinct advantages--the strength/weight ratio is exceptional and there is no handle/blade join. This means that there is no area where the blade and handle could come apart--a weakness in the design of other hollow handle knives. The handle cavity is larger than that of any similar knife. The hollow handle is closed with a butt cap made of 6061 aluminum which screws into the handle against a Neoprene "O" ring, ensuring the cavity is sealed from dust and moisture. All the one piece knives are hardened to 55-57 RC and random checks are made to ensure accuracy. This hardness gives superb toughness, good edge retention and allows for efficient sharpening in the field. Each knife is coated with super hi-tech KG Gun-Koteä originally developed for use in the aerospace industry. This coating offers a durable, long-lasting, non-reflective covering. Included in the price of each knife is a hand-made leather sheath. A lifelong guarantee, signed by Chris accompanies each knife.
The one piece design offers the highest possible weight/strength ratio
A2 Tool Steel offers excellent edge retention and good shock resistance
Hardness at between 55 and 57 Rockwell C is not brittle but gives good edge retention along with ease of sharpening
An 8" hollow grind is used with a full thickness back edge. All designs are ground to allow the full thickness of the back edge to come as close to the point as possible, affording a very strong front tip but not restricting the knife's ability to pierce
The hollow handle, which is created to reduce weight, is larger than any similar sized knife because there is no join between handle and blade
The aluminum butt cap provides an airtight closure for the hollow handle and is designed so that it can be used for hammering. Because using the knife as a hammer can be dangerous to one's knuckles and fingers, we do not recommend that this be done unless in an emergency situation. It is preferable to use a hammer
Full depth precision machined knurling affords maximum non-slip grip
Non-reflective KG Gun-Koteä coating gives lasting protection
All knives carry a lifetime guarantee and a damaged knife will be replaced or repaired at Chris' discretion. This guarantee does not cover damage to a knife that has been thrown or used for heavy levering
These knives are used by hunters, backpackers, SWAT teams, military personnel, firefighters and police all over the world. They are also to be found in many knife collections and most of our customers own more than one of our knives
Each hand made leather sheath is designed to fit the knife well, to give maximum protection to the carrier and the knife when being carried. Because we continue to improve our design, sheaths supplied might not be exactly as shown in the brochure
Replacement butt caps and sheaths are available at reasonable prices
Many customers feel that once their knives have been used, they lose collector's value. This is not so as the knife can be returned to Chris Reeve Knives, where it will be sandblasted, re-coated with KG Gun-Kotea, sharpened and returned to it's original condition. Contact Chris Reeve Knives for cost. Please return knife in sheathCR-MkIV -
Chris Reeve - Ubejane Skinner - coltello
Raro coltello fuori serie realizzato nel 2009 da Chris Reeve.
Il nome Ubejane significa Rinoceronte nella lingua Zulu in South Africa.
Destinazione d'uso: Collezione/Caccia/Sportivo
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio A2 55/57HRC
Trattamento Lama: black
Manicatura: Brown canvas Micarta
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 230mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 312g.
Chiusura: -
Clip: -
Fodero: Cuoio nero
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: coltello fuori produzione dal 2011CR-SKINNER -
Gerber - StrongArm Fixed Coyote - knife
Intended Use: Tactical / Hiking
Type of production: Industrial
Blade: full tang, stainless steel 420HC
Treatment Lama: Ceramic Coating
Production Lama USA
Handle material: fiberglass and nylon with rubbered anti slip polymer
Blade length: 122mm.
Blade Thickness: 5mm.
Overall length: 248mm.
Balancing: backward 1cm.
Weight: 204g.
Sheath: Nylon and polymers, MOLLE compatibile
Notes: Skullcrasher with hole12284 -
Gerber - Bear Grylls Ultimate Pro Fixed Blade - 31-001901 - knife
Blade: 9Cr19MoV Stainless Steel Handle: TPE Blade Lenght: 122mm. Blade Thickness: 5mm. Overall Lenght: 254mm. Weight: 388.4g. Lock: - Clip: - Sheath: - Notes: Pull-through carbide sharpener in sheath, for guaranteed sharpness - Built-in fire starter rod in watertight holder10070 -
A.T.C. - American Tomahawk Company - Fox Fighting Tomahawk - FX-ATC02
Destinazione d'uso: Tattico/Allround
Tipo di produzione: industriale
Lama: in acciaio inox N690Co 58/60HRC
Trattamento Lama: Teflonatura Opaca Nera
Produzione Lama: Italia
Manicatura: G-10 OD Green
Lunghezza lama: 95mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 360x220mm.
Bilanciatura: -
Peso: 810g.
Chiusura: -
Clip: -
Fodero: Cordura Verde 1100D
Note: Design by Sibert - Prodotto commissionato dall'americana Tomahawk Company, specializzata in questa tipologia di articoli - Adatta ad usi estremi - Adatta per il lancio.5747 -
Bark River - Huntsman A2 Green Canvas Micarta - Coltello
Destinazione d'uso: Caccia/Outdoor/Bushcraft
Tipo di produzione: Semi-Industriale
Produzione Lama: USA
Lama: in acciaio A2 a 58HRC
Trattamento Lama: -
Manicatura: Green Canvas Micarta
Lunghezza lama: 82mm.
Spessore lama: 4.8mm.
Lunghezza chiuso: -
Lunghezza totale: 178mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 100g.
Chiusura: -
Clip: -
Fodero: In pelle marrone, stile Loveless
Confezione: Scatola di cartone con loghi Bark River
Note: -3296 -
Gerber - G01063 - Bear Grylls Ultimate Fine Edge Fixed Blade - coltello
L'ultimate knife è il fiore all'occhiello della serie survival sviluppata in collaborazione con Bear Grylls.
Disegnato dietro strette indicazioni di Bear, è carico di innovazioni che non è possibile trovare su altri modelli a lama fissa.
Destinazione d'uso: Utility
Tipo di produzione: Industriale
Produzione Lama: China
Lama: in acciaio inox 7Cr17MoV a filo liscio
Trattamento Lama: Nitrurazione
Manicatura: Gomma antiscivolo e Nylon
Lunghezza lama: 120mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 255mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 240g.
Chiusura: -
Clip: -
Fodero: Cordura con guscio rigido in Nylon
Confezione: Scatola con loghi Gerber/Bear Grylls
Note: acciarino incluso - affilatore al diamante
Caratteristiche del coltello:
- Lama drop point in acciaio inox liscia
- Impugnatura ergonomica in gomma texturizzata per massimizzare il comfort e massimizzare il grip della presa
- Pomolo in acciaio inox, ideale per essere utilizzato come martello
- Battente per acciarino integrato nel dorso della lama
- Fischietto di emergenza integrato con il lacciolo di sicurezza
Caratteristiche del fodero:
- Fodero in Nylon
- Acciarino al ferro-cerio integrato
- Affilatore al diamante integrato
- Piccolo manuale di emergenza con consigli di sopravvivenza di Bear Grylls
Il consiglio di Bear Grylls:
“Il compagno delle mie avventure più estreme, senza di lui non mi sentirei al sicuro. Un'impugnatura super grippante è essenziale nella natura ed un fodero così ricco ben concepito aiuta a tenere tutto a portata di mano in caso di emergenza."4613L -
Gerber - G0751 - Bear Grylls Ultimate Fixed Blade - coltello
L'ultimate knife è il fiore all'occhiello della serie survival sviluppata in collaborazione con Bear Grylls.
Disegnato dietro strette indicazioni di Bear, è carico di innovazioni che non è possibile trovare su altri modelli a lama fissa.
Destinazione d'uso: Utility
Tipo di produzione: Industriale
Produzione Lama: China
Lama: in acciaio inox 7Cr17MoV
Trattamento Lama: Nitrurazione
Manicatura: Gomma antiscivolo e Nylon
Lunghezza lama: 120mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 255mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 240g.
Chiusura: -
Clip: -
Fodero: Cordura con guscio rigido in Nylon
Confezione: Scatola con loghi Gerber/Bear Grylls
Note: acciarino incluso - affilatore al diamante
Caratteristiche del coltello:
- Lama drop point in acciaio inox parzialmente seghettata
- Impugnatura ergonomica in gomma texturizzata per massimizzare il comfort e massimizzare il grip della presa
- Pomolo in acciaio inox, ideale per essere utilizzato come martello
- Battente per acciarino integrato nel dorso della lama
- Fischietto di emergenza integrato con il lacciolo di sicurezza
Caratteristiche del fodero:
- Fodero in Nylon
- Acciarino al ferro-cerio integrato
- Affilatore al diamante integrato
- Piccolo manuale di emergenza con consigli di sopravvivenza di Bear Grylls
Il consiglio di Bear Grylls:
“Il compagno delle mie avventure più estreme, senza di lui non mi sentirei al sicuro. Un'impugnatura super grippante è essenziale nella natura ed un fodero così ricco ben concepito aiuta a tenere tutto a portata di mano in caso di emergenza."4613