Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1989 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade
* Sharpening: Factory sharpened.
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Warranty certificate issued by the Italian dealer of the time, not stamped or signed.
* Checked and Certified by our in-house laboratory

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: Germany
Blade: Bohler K190 powder steel at 62HRC
Blade finish: horizontal satin finish
Handle: integral, from solid, with snakewood grips
Blade length: 83mm
Blade thickness: 4mm.
Total length: 187mm.
Weight: 139g.
Sheath: leather, belt
Packaging: -
Notes: rare handcrafted knife made in 1989 by renowned German cutler Dietmar Kressler

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, but not used.
* Condition: Overall in good condition with some aesthetic dissimilarity of the Black TiNi finish due to time
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: Uneven color of Black TiNi finish given by signs of time
* Marks on handle: No.
* Box: Present, worn
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory


Intended Use: Sporting

Production type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade finish: Black TiNi
Handle: Zytel with steel liners
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 210mm.
Thickness when closed: 20mm.
Weight: 135g.
Closure: Arc Lock
Clip: removable, stainless steel
Packaging: cardboard box with SOG logos
Notes: previously purchased knife, from private collection

Knife withdrawn from private collection - Rare model no longer in production.

The Zero Tolerance 0500 model, also known as MUDD, was designed by Grant and Gavin Hawk. This knife is resistant to sand, dirt, and water thanks to the neoprene seals around the pivot and the lock.

The blade is coated in Tungsten DLC, approximately 9.2 cm long, and made of 154CM steel.

The handle is made of aluminum with textured G-10 grips, providing a solid grip.

This model was manufactured roughly between 2007 and 2009, and although the exact number of pieces produced is not known, estimates suggest a low quantity, probably between 1000 and 2500 units.

NOS FULL SET KNIFE, NEW FROM STOCK

Type: withdrawn from private collection
Condition: Like new
Available in the market: Out of production since 2009
Sharpening: Factory
Marks on blade: No
Marks on handle: No
Box: Included
Sheath: -
Manuals, Certificates, and Guarantees: Included
Checked and Certified by our internal laboratory

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available No.
* Sharpening: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: NO
* Scabbard: Leather, handcrafted
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our in-house laboratory






Intended use: collection / fighter

Production type: handmade
Country of production: Italy
Blade: steel N690Co 59/60 HRC
Blade finish: satin finish
Handle: stabilized alder wood with 416 stainless steel through-guard and screw pins
Blade length: 123mm.
Blade thickness: 4mm.
Total length: 232mm.
Weight: 212g.
Sheath: handcrafted, made of ostrich paw and leather, hand-stitched
Packaging: -
Notes: Previously purchased, like new - Knife handcrafted by Livio Montagna, accredited member C.IC. (Italian Knifemakers Guild).

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No
* Sharpening: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: NO
* Scabbard: Leather, handcrafted, original with some small marks due to age and storage
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our in-house laboratory

Knife handcrafted by Accredited Member C.IC. (Italian Guild of Cutlery Makers) Livio Montagna. Reproduction inspired by one of the most iconic knives of all time (the Bowie), but with a more "tactical" touch for the blade; the deer handle and leather rings are left to recall the classicism of the model.

Intended use: hunting / collection

Type of production: artisan
Country of production: Italy
Blade: hardened 440C steel at 59/60 HRC
Blade finish: satin finish
Handle: Deer and Leather Rings - brass guard
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 340mm.
Weight: 390g. (519g. including scabbard)
Sheath: Handcrafted, leather, hand-stitched
Packaging: NO
Notes: -

COLTELLO USATO, RITIRATO DA COLLEZIONE PRIVATA
* Tipologia: Produzione degli anni 80 (presumibilmente 1984/1986), precedentemente acquistato ed etilizzato
* Condizioni: Globalmente in buone condizioni
* Reperibile in commercio: Attualmente in produzione, con differenti finiture del cuoio
* Affilatura: Riaffilato professionalmente
* Segni su lama: Diversi segni di usura che conferiscono carattere e non ne limitano la funzionalità
* Segni su impugnatura: Segni di usura su guardia e pomolo, cuoio del manico in buono stato
* Scatola: Assente
* Fodero: Assente
* Manuali, Certificati e Garanzie: No
* Controllato e Certificato dal nostro laboratorio interno

Il KA-BAR USMC è considerato uno tra i più famosi coltelli al mondo. Venne originariamente ideato per le truppe degli Stati Uniti nella Seconda Guerra Mondiale e da allora la sua efficacia è stata universalmente riconosciuta e impiegata in tanti altri scenari militari. 

Destinazione d'uso: Tattico/Militare

Lama: in acciaio al carbonio 1095 56/58HRC
Manicatura: anelli di cuoio
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 305mm.
Bilanciatura: arretrata - 1 cm. dal ramo di guardia inferiore
Peso: 305g.
Fodero: in cuoio
Note: Produzione degli anni 80 (presumibilmente 1984/1986), precedentemente acquistato ed etilizzato

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In like-new condition
* Commercially available Discontinued as of 2022
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present (but from a different ZT knife).
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Sporting / Collection

Type of Production: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade Treatment: Black DLC
Handle: Titanium Black DLC and G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total length: 218mm.
Thickness when closed: 14mm.
Weight: 134g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings - Carson Flipper opening system

Translated with DeepL

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like New
* Commercially available No.
* Sharpening: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: NO
* Scabbard: Leather, handcrafted and hand-stitched
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our in-house laboratory

Knife handcrafted by Accredited Member C.I.C. (Corporazione Italiana Coltellinai) Livio Montagna. 

Intended use: bushcraft / utility

Type of production: handcrafted
Country of manufacture: Italy
Blade: RWL34 steel
Blade finish: satin-finished
Handle: micarta with 416 stainless steel cotter
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Weight: 230g.
Scabbard: handcrafted, leather, hand-stitched
Packaging: unwrapped, comes with certificate of authenticity and warranty
Notes: previously purchased knife, from a private collection, "homage" to the Bayley S4 knife, designed and handcrafted by Rob Bailey, famous for being used by Bear Grylls during his first TV appearances, before he made business deals with Gerber.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased from Lorenzi's cutlery shop in Milan, via Monte Napoleone, presumably in the 1980s.
* Condition: In good condition
* Commercially available: the craftsman long ago stopped making knives.
* Sharpening: Factory original, can be improved, with some cosmetic abrasion
* Marks on blade: Small marks and slight hairlines also on the through-guard.
* Marks on handle: A few small marks.
* Packaging: absent
* Scabbard: Leather, handcrafted, original, stamped "Coltelleria Lorenzi," with marks given by use and time
* Manuals, Certificates and Warranties: absent.
* Checked and Certified by our in-house laboratory

Intended use: collection/tactical

Type of production: handcrafted
Country of manufacture: USA
Blade: full tang stainless steel, steel composition not stated (presumably RWL34 or 440C)
Blade finish: mirror polish
Handle: nickel silver through-guard and brown micarta grips, with red spacers
Blade length: 97mm.
Blade thickness: 4mm.
Total length: 202mm.
Weight: 97g.
Sheath: handcrafted, leather, with stainless steel back clip
Packaging: -
Notes: Specimen presumably from the 1980s, previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: various marks given by time and use.
* Marks on handle: normal signs of time.
* Box: not present
* Scabbard: present, original, leather, with signs of time.
* Manuals, Certificates and Warranties: not present.
* Checked and Certified by our in-house laboratory.


Created as a cutting tool and emergency instrument for U.S.A.F. pilots, the Camillus Pilot has managed to win a solid reputation worldwide for both its legendary sturdiness and its successful and attractive aesthetics. 

Intended Use: Collection/Tactical

Type of production: Industrial
Country of manufacture: USA
Blade: hidden tang, made of 1095 carbon steel
Blade finish: epoxy powder
Handle: pressed leather rings
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 243mm.
Weight: 255g.
Sheath: leather
Packaging: -
Notes: 1985 knife withdrawn from private collection

KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: light
* Marks on handle: light, on the guard
* Box: Original, with some marks
* Scabbard: Original, leather, with some small marks, also due to the insertion of the knife
* Manuals, Certificates and Warranties: Certificate present
* Checked and certified by our in-house laboratory

This limited edition Magnum Tanto style piece is based on a historical Japanese samurai sword that was popular during the Heian period (794-1185). The modified dagger-style blade, based on a design by the legendary blacksmith Amakumi, refers to the period when samurai lived the 'bushido' or 'way of the warrior'. The shape of this blade is called Kissagi-moroha and is derived from the Kogarasu-maru sword. The material of the blade is 440A stainless steel with a rich two-tone finish. The traditional handle is combined with synthetic material simulating tsuka and ray skin; the Tsuba provides a secure grip. Supplied with a genuine leather sheath and presentation box. Limited to 1,999 pieces worldwide, each serialised.

Intended use: Collection / Utility

Production type: Industrial
Country of manufacture: Taiwan
Blade: Ful tang in 440A steel
Blade finish: satin finish/polishing
Handle: canvas and synthetic ray skin
Blade length: 180mm.
Blade thickness: 5mm.
Total length: 300mm.
Weight: 271g.
Sheath: black leather
Packaging: case with certificate of guarantee
Notes: Numbered and limited edition of 1999 pieces - Serial Number 136

NOS KNIFE (New, Old Stock) WITHDRAWN FROM PRIVATE COLLECTION.
* Type: Previously Purchased.
* Condition: NOS, like new
* Commercially available Out of production.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present (full set)
* Scabbard: -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory



Intended Use: Tactical/EDC

Production Type: Industrial
Country of Production: Japan - Seki
Blade: stainless steel AUS-8 56/58HRC
Blade finish: microbead blasting
Handle: aluminum liners, Zytel grips
Blade length: 126mm.
Blade thickness: 4mm.
Length closed: 149mm.
Total length: 275mm.
Thickness when closed: 19mm.
Weight: 198g.
Closure: Arc Lock
Clip: Removable, stainless steel
Packaging: black and white cardboard case with SOG logos
Notes: knife discontinued NOS (new, old stock) new and perfect in every part

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On commission
* Sharpening: Factory.
* Marks on blade: A couple of imperceptible marks on the satin finish, presumably from being inserted in the scabbard
* Marks on handle: No.
* Packaging: Zip pouch, original
* Scabbard: Leather, handcrafted, original
* Manuals, Certificates and Warranties: Certificate of guarantee and authenticity present.
* Checked and Certified by our in-house laboratory



Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel ATS-34 60HRC
Blade finish: satin finish
Handle: deer Sambar with stainless steel 416 guard
Blade length: 87mm.
Blade thickness: 4mm.
Total length: 198mm.
Weight: 80g.
Sheath: handcrafted, leather, for vertical belt carry
Packaging: zippered case and certificate of authenticity and guarantee from the Corporazione Italiana Coltellinai
Notes: Designed and made entirely by hand in Italy by Master CIC Roberto Bernini, specimen dated November 2010 - Previously purchased, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On order.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Original packaging present
* Scabbard: Original scabbard present.
* Manuals, Certificates and Warranties: Certificate of Warranty and Authenticity present.
* Checked and Certified by our in-house laboratory



Intended use: sports/collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL-34 60HRC
Blade finish: dual tone (satin finish and microblading)
Handle: channel handles and titanium TI6AL4V inserts, ball bearing movement
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: 147mm.
Total length: 256mm.
Weight: 120g.
Closure: -
Clip: -
Sheath: Black leather pouch
Packaging: Leather pouch with zipper and certificate of authenticity and warranty made of steel, laser engraved
Notes: Designed and made entirely by hand in Italy by Davide Ceroni - Previously purchased 09/12/2021 specimen from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Used, but in good condition
* Commercially available Discontinued
* Sharpening: Professionally re-sharpened. 
* Marks on blade: Signs of wear on tip, right side.
* Marks on handle: Some slight marks on tang, wear marks on removable clip
* Box: Comes with original box
* Scabbard: -
* Manuals, Certificates and Warranties: Supplied with original warranty and accessories.
* Checked and Certified by our in-house laboratory



Intended Use: Sporting/Tactical


Production Type: Industrial
Country of Production: Italy
Blade: Sleipner steel 60/61HRC
Blade finish: satin-finished
Handle: Titanium 6Al4V monolithic
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 180mm.
Thickness when closed: 9mm.
Weight: 140g.
Closure: Frame Lock with Rotoblock security system
Clip: removable and reversible, stainless steel
Packaging: wooden box with Lion Steel logos
Notes: discontinued item, previously purchased, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Condition: in mint condition - year of manufacture 1997
* Sharpening: Factory
* Marks on blade: None
* Signs on handle: None
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: without certificate
* Checked and Certified by our internal laboratory

Intended use: Collection
Type of production: Handcrafted unique piece by Francesco Pachì with Scrimshaw (wolf's head) by Mirella Pachì
Blade production: Italy
Blade: ATS-34 stainless steel
Handle: in desert ironwood with insert in mammoth fossil ivory with handcrafted scrimshaw depicting a wolf's head
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 235mm.
Weight: 215g.
Sheath: in handmade leather
Packaging: Pachì cordura pocket
Note:

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2014, limited edition made of only 300 pieces.
* Sharpening: Factory sharpened, improvable
* Marks on blade: None
* Marks on handle: Very small abrasions on titanium and hardware.
* Box: Present - Original
* Scabbard: Present - Original.
* Manuals, Certificates and Warranties: Certificate with date of manufacture, serial number and signature.
* Checked and Certified by our in-house laboratory


Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: USA
Blade: sintered stainless steel CPM-154CM
Blade Finish: Stone Washed
Handle: Microblasted Titanium
Blade Length: 76mm.
Blade thickness: 4.7mm.
Total length: 190mm.
Thickness when closed: 12mm.
Weight: 115g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Quartermaster logos
Notes: Knife withdrawn from a private collection, previously purchased - Limited edition specimen of only 300, individually numbered on blade and box (knife number #159)

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like New
* Commercially available: Discontinued since 2014, limited to only 150 numbered pcs.
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present - Original
* Scabbard: -
* Manuals, Certificates and Warranties: Warranty certificate with serial number, date of manufacture and signature.
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: USA
Blade: sintered stainless steel CPM-154CM
Blade Finish: Stone Washed
Handle: G10
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 178mm.
Thickness when closed: 17mm.
Weight: 190g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Quartermaster logos, warranty certificate with date of manufacture, serial number and signature
Notes: ORB Pivot System ball bearing opening system - 2014 limited edition specimen of only 150, individually numbered on blade and box (specimen number #91)

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available: Discontinued, made in 2018 in only 300 pieces, individually numbered
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Original Nylon case with accessories.
* Scabbard: Not provided
* Manuals, Certificates and Warranties: Certificate with serial number and signature.
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / Collection 

Type of production: Midtech (semi-craft)
Country of manufacture: Russia
Blade: stainless steel M390
Blade treatment: Bkacwashed
Handle: bronze anodized titanium with carbon fiber inserts
Blade length: 111mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 250mm.
Thickness when closed: 13mm.
Weight: 167g.
Closure: Frame Lock
Clip: titanium machined from solid, with Timascus insert
Notes: knife from private collection, previously purchased, made in only 300 individually numbered examples

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production single piece produced in 2019
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: -
* Sheath: no
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratory

Intended use: Collection

Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: full-tang stainless steel RWL-34 60 / 61HRC
Blade treatment: -
Handle: holographic resin handle with titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Closed length: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 132g.
Closure: Liner Lock
Clip: -
Sheath: -
Packaging:
Notes: Handmade by Master Sergio Consoli - knife number 480 made in 2019

The SOG Tomcat is one of SOG's largest folding knives. It features a 5mm thick blade, making it a heavy-duty folding knife, and while it weighs more than the average folding knife, it will withstand heavy use. The SOG Tomcat also won the "Overall Knife of the Year" award in 1988, one of the company's first awards, for its outstanding design.

It is one of the most collected SOG folding knives

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Out of production, in production between 1986 and 2002
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: Yes, original, in perfect condition
* Sheath: original in cordura
* Manuals, Certificates and Warranties: present in the package
* Checked and certified by our internal laboratory

Intended use: Collection

Type of production: Industrial
Production Lama: Japan
Blade: 440C stainless steel
Blade treatment: -
Handle: Stainless steel and Kraton
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 116mm.
Total length: 210mm.
Thick when closed: -
Balancing: -
Weight: 216g.
Closure: back-Lock
Clip: -
Sheath: Nylon
Packaging: Cardboard box with SOG logos
Note:

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available: Discontinued, replaced by new variants in different steels
* Sharpening: Factory sharpened
* Marks on blade: No
* Marks on handle: No
* Box: Yes, original, in perfect condition
* Scabbard: -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / Collection 

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade treatment: Microbead blasted
Handle: Duralumin A7075 
Blade length: 152mm.
Blade thickness: 4mm.
Length closed: 178mm.
Total length: 330mm.
Thickness when closed: 22mm.
Weight: 258g.
Closure: LinerLock type
Clip: removable, painted stainless steel
Notes: discontinued knife, like new, withdrawn from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued, replaced by later Gen.
* Sharpening: Factory sharpened, but improvable
* Marks on blade: No
* Marks on handle: Small marks on hardware.
* Box: No
* Scabbard: -
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratory





Intended Use: Tactical / Collection 

Type of production: Midtech (semi-craft)
Country of manufacture: USA
Blade: Stainless steel CPM-20CV
Blade treatment: Stonewashed
Handle: 3mm thick G10 black (+ one spare in desert color) on 1mm thick 6AL4V titanium liner. Frame in 4mm thick billet 6AL4V titanium with Hinderer Lockbar Stabilizer. 17-4PH stainless steel spacers and hardware.
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 207mm.
Thickness when closed: 13mm.
Weight: 175g.
Closure: frame lock type
Clip: stainless steel 17-4PH
Notes: coyote paracord lanyard - second G10 scale, original Hinderer, in desert color - knife from private collection, previously purchased - product does not fall under "Loyalty" discounts

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory sharpened, perfect
* Marks on blade: No
* Marks on handle: Very small abrasion sengi on a couple of corners and on the clip.
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory



Intended Use: Collection/Tactical

Type of production: Midtech (semi-craft)
Country of manufacture: USA
Blade: stainless steel CPM-S30V/CF2 triple hardened 59/61HRC
Blade finish: Stone Washed
Handle: Titanium 6AL4V
Blade Length: 90mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 222mm.
Thickness when closed: 10.7mm.
Weight: 307g.
Closure: Frame Lock
Clip: Ttanium 6AL4V
Packaging: Cardboard box with Crusader Forge logos - certificate of guarantee and authenticity with knife data sheet
Notes: knife withdrawn from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available In production, but hard to find.
* Sharpening: Factory.
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory



Intended Use: Tactical/CQC

Production type: Industrial
Country of Production: Italy
Blade: Full tang in N690Co 58/60HRC steel
Blade finish: satin finish
Handle: olive wood
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 220mm.
Balance: backward
Weight: 200g.
Sheath: leather
Packaging: cardboard box with Fox logos
Notes: knife withdrawn from private collection - like new

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Commercially available: no longer in production since 2014
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original ZT box
* Manuals, Certificates and Guarantees: ZT certificates
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Tactical / Military

Type of production: Industrial
Production Lama: USA
Blade: CPM-S30V steel
Blade treatment: Tungsten DLC Coating
Handle: Black anodized aluminum with non-slip Trac-Tec inserts
Blade length: 925mm.
Blade thickness: 4mm.
Closed length: 126mm.
Total length: 215mm.
Thick when closed: 17mm.
Balancing: -
Weight: 146g.
Closure: Liner Lock
Clip: Removable, Multiposition, in stainless steel
Sheath: -
Packaging:
Notes: Design by Ken Onion - SpeedSafe opening system

Interesting handcrafted lockable "One of a Kind" made in 2008 by established Danish knife maker Mikkel Willumsen

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Overall in very good condition
* Commercially available Unique specimen made in 2008.
* Sharpening: Original, with a few small marks from use.
* Marks on blade: A couple of small marks.
* Marks on handle: A couple of small abrasions on titanium folder.
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory



Intended Use: Collection 

Production type: custom
Country of production: Denmark
Blade: handcrafted and beveled, stainless steel RWL-34
Blade treatment: dual tone: stone washed and handcrafted satin finish
Handle: micropallinated titanium and carbon fiber
Blade length: 107mm.
Blade thickness: 4mm.
Length closed: 137mm.
Total length: 245mm.
Thickness when closed: 15mm.
Weight: 215g.
Closure: Framelock
Clip: Removable, anodized titanium
Notes: Made entirely by hand by Mikkel Willumsen - Ball bearing opening

Knife withdrawn from private collection - First series (Gen1) of the model produced from 2010, born from the collaboration with Rick Hinderer - Discontinued and no longer available - Globally in very good condition with original sharpening - Supplied with custom G10 and original cheek piece, which can be installed as desired - Devoid of original packaging - Checked and certified by our in-house laboratory.

Intended Use: Sporting

Type of production: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S35VN
Blade finish: Stonewashed
Sleeve: Titanium and G-10 Black (with additional custom G10 gauntlet)
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 206mm.
Thickness when closed: 14mm.
Weight: 173g.
Closure: Frame Lock
Clip: Removable, reversible and multi-position, stainless steel
Packaging: -
Notes: Design by Rick Hinderer - Collected from private collection, overall in very good condition

Knife withdrawn from private collection. Overall in good condition shows small marks on clip, hardware and handle - Original factory sharpening in good condition - Complete with original Extrema Ratio cardboard box - Checked and certified by our in-house laboratory. 

Intended Use: Tactical/Sportsman

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924
Handle: rough anticorodal (aluminum)
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 15mm.
Weight: 139g.
Closure: Liner Lock, with additional safety catch
Clip: Removable and reversible stainless steel
Packaging: cardboard box with Extrema Ratio logos

Knife withdrawn from private collection, presumably from the first half of the 1980s - In excellent condition, with no particular scratches or signs of wear, still has the original factory sharpening - Rare version with micarta handle and engraved head " De Oppresso Liber", the famous motto of the American Green Berets - Original leather sheath in excellent condition, accompanied by original sharpening stone that finds its place in the special pocket - Checked and certified by our in-house laboratory.

Intended use: collection

Type of manufacture: industrial
Blade: stainless steel AUS 8
Blade finish: satin finish
Country of manufacture: Seki - Japan
Handle: brown micarta
Blade length: 148mm. 
Blade thickness: 4mm.
Total length: 265mm.
Balance: on the guard branch
Weight: 238g.
Sheath: black leather, with sharpening stone
Notes: knife from a private collection from the first half of the 1980s, overall in very good condition

Knife from private collection - Knife in mint condition, brand new - Checked and certified by our in-house laboratory.

Intended Use: Collection / Heavy Duty

Type of production: Handcrafted
Country of manufacture: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total length: 214mm.
Thickness when closed: 24mm.
Weight: 167g.
Opening: Carson Flipper system / Ambidextrous opening pins on blade
Closure: Rockers Arm 8.11
Clip: stone washed titanium, removable and reversible
Packaging: -
Notes: Limited Edition handcrafted by Dino Picco of Wander Tactical

Knife withdrawn from private collection presumably dating back to the first half of the 1980s - overall in good condition - knife still has factory sharpening, but now ineffective - has a couple of small scratches on the blade and a few small marks on the guard - comes with Randall handcrafted leather sheath in excellent condition - Checked and certified by our in-house lab. 

Randall's Model 11 was designed in 1952 by Tommy Thompson, noted Alaskan guide. An otima blade for skinning big game, it features a serrated top of the blade to facilitate thumb placement and prevent thumb slippage.

Intended use: hunting/collecting

Type of production: handcrafted
Country of manufacture: USA
Blade: O-1 carbon steel
Blade finish: satin-finished
Handle: deer antler, with brass guard
Blade length: 855mm.
Blade thickness: 4mm.
Total length: 195mm.
Balance: set back, at 2cm.
Weight: 165g.
Sheath: Leather
Notes: knife withdrawn from private collection, overall in good condition

Knife withdrawn from private collection - Absolutely like new, untouched, never used, never put in the sheath - Supplied with box and warranty - Checked and certified by our in-house laboratory.

Intended Use: Sporting / Hunting

Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang stainless steel M390 59/61 HRC
Blade treatment: PVD Stonewashed
Handle: stainless steel M390
Blade length: 60mm.
Total length: 135mm.
Blade thickness: 5mm.
Weight: 70g.
Sheath: leather sheath
Packaging: Cardboard box with GiantMouse ACE logos
Notes: Design by Jens Anso & Jesper Voxnaes - Knife withdrawn from private collection, absolutely like new

Collected from a private collection, this Custom model of the American Buck made prior to 1986 is numbered on the blade with serial number 0023 - Never used and never resharpened, overall in excellent condition - Devoid of packaging and certificates, supplied with its own brown leather sheath - Distinguished by its full tang construction, prominent brass guard and beautiful stag handle with finger grooves - Checked and certified by our in-house laboratory Coltelleria Collini.

Intended Use: Collection / Hunting

Type of production: handcrafted
Country of production: USA
Blade: full tang in 420HC stainless steel with concave rounding
Blade finish: mirror polish
Handle: brass guard and deer handle with finger grooves
Blade length: 134mm.
Blade thickness: 5mm.
Total length: 258mm.
Weight: 325g.
Sheath: leather
Packaging: -
Notes: Pre-1986 specimen withdrawn from private collection - Custom series, numbered version on blade, specimen number 0023 - Never used, never resharpened, in excellent condition

Knife withdrawn from a private collection. Condition like new, production dating back to between 1996 and 2005, supplied with Randall artisan leather sheath. Checked and certified by our internal laboratory.

Intended use: hunting / collection

Type of production: artisanal
Production Lama: america
Blade: 440A stainless steel
Blade treatment: -
Handle: -
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 165mm.
Balance: set back, at 2cm.
Weight: 89g.
Closure: -
Clip: -
Sheath: Leather
Note:

Each Randall model has been thoroughly tested in the field and has been shown to be properly modeled and designed for its particular use. Randall knives are 100% handmade and no two are exactly alike. The demand is so great for all models that it typically takes a few years to get the model ordered directly from Randall.

"Bo" Randall passed away on December 25, 1989 at his home. Bo and his son Gary have run the business side by side for over twenty five years. Gary continues the tradition of handcrafted knives that carry the Randall Made brand along with his children, Jason and Michael.

Knife acquired from a private collection - Overall in very good condition, with factory sharpening - Rare version, one of the first, with flat G10 handle - Hardened by Paul Bos, with logo present on the right heel of the blade - It has some small signs of abrasion on the tigerstripe finish, common to all Strider knives - Checked and certified by our internal laboratory.

Intended Use: Tactical

Manufacturing Type: Mid Tech (semi-craft)
Country of Production: USA
Blade: Stainless steel CPM-S30V hardened by Paul Bos
Blade Treatment: Tiger Stripe
Handle: G10 flat with 2mm titanium liners
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thickness closed: 18mm.
Weight: 228g.
Closure: Liner Lock
Clip: Titanium 
Package: Nylon pouch with zipper 
Notes: Rare version, one of the first, with G10 flat grip - Hardened by Paul Bos, with logo on the right heel of the blade

Knife withdrawn from a private collection. Produced in 2008, it was born from the collaboration between Buck and Simonich Knives. The result is a sturdy, yet handy full tang tactical knife.
Overall in excellent condition - Checked and certified by our in-house Coltelleria Collini laboratory, it comes complete with original box.

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: USA
Blade: Bos-hardened CPM S30V stainless steel
Handle: G10
Blade length: 125mm.
Blade thickness: 4mm.
Total length: 255mm.
Balancing: set back from the guard branch at about 40mm.
Weight: 230g. (317g. Including scabbard)
Sheath: in black Nylon
Packaging: Official cardboard box with Buck logos

Knife withdrawn from a private collection. Condition like new, production dating back to 2005 supplied with Randall artisan leather sheath. Checked and certified by our internal laboratory.

Randall's Model 11 features a serrated top blade for thumb placement. From a leather handle of about 11 cm equipped with a duralumin bottom. The drop-point blade was designed in 1952 by Tommy Thompson, a well-known Alaska guide. Excellent blade for skinning large game.

Intended use: hunting / collection

Type of production: artisanal
Production Lama: america
Blade: stainless steel
Blade treatment: -
Handle: leather and brass discs
Blade length: 105mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 225mm.
Balance: set back, at 2cm.
Weight: 163g.
Closure: -
Clip: -
Sheath: Leather
Note:

From a private collection, this is a model no longer in production that reproduces the Argentine national knife: a blade with a simple shape that is ideal for almost everything from hunting, repair of harnesses and saddles, cooking and eating meals.

In very good condition, it shows some signs of light oxidation on the blade. Checked and certified by our internal laboratory Coltelleria Collini.

Intended use: hunting, cooking

Type of production: industrial
Blade: carbon steel 1090
Country of production: India
Handle: Malaysian Sai Wood
Blade length: 300mm.
Blade thickness: 5mm.
Total length: 447mm.
Balance: forward, 4cm. from the handle
Weight: 542g. (709G. scabbard included).
Scabbard: leather, with metal trim
Notes: -

Knife collected from private collection - 2014 model entirely handmade by Allen Elishewitz - Like new, original sharpening - Supplied with nylon pouch with velcro - Checked and certified by our internal laboratory Coltelleria Collini.

Intended use: Collection 

Kind of production: Handmade
Country of production: USA
Blade: handcrafted and beveled, in CTS-C75P stainless steel (Latrobe BG-42)
Blade treatment: handmade satin finish with Allen Elishewitz golden punch
Handle: titanium liners "crushed ice" with carbon fiber and copper grips with handmade bronze bolsters
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total lenght: 223mm.
Thickness when closed: 16mm.
Weight: 199g.
Closure: Liner Lock
Clip: Removable, inegral carbon fiber
Notes: Entirely handcrafted by Allen Elishewitz - 2014 model, like new - from private collector - Supplied with nylon velcro pouch.

Intended use: hunting / sports / collection

Type of production: industrial
Blade: A2 carbon steel
Production Lama: USA
Handle: Green Canvas micarta
Blade length: 140mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 270mm.
Balancing: -
Weight: 262g.
Closure: -
Clip: -
Sheath: Brown Leather
Notes: made by Bark River

Rare knife produced by the Japanese Al-Mar around the 90s. Knife withdrawn from a private collection in like new condition - New knife with sheath and original box - Checked and certified by our in-house Coltelleria Collini laboratory.

Intended use: sports / collection
Type of production: industrial
Blade: AUS 8 stainless steel
Blade treatment: -
Lama production: Japan
Handle: micarta
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 195mm.
Weight: 117g.
Closing: -
Clip: -
Sheath: in leather
Notes: with original box

Retired from rivata collection - Rare Rockstead model produced in 2009 in SANMAI ZDP189 and ATS34 steel - the temper of this piece has reached a rare hardness of 67.4 hrc - Knife in like new condition.

Checked and certified by our internal laboratory - Collini Cutlery.

The best industrial knives currently in production are currently marketed under the Rockstead brand, of Ishida Co. of Sakai, Japan.

Created by Katsumi Kitano, who has been producing quality knives for over 20 years so as to have been awarded the highest recognition among artisan cutlers in Japan, they prove to be exceptional both in cutting capacity, penetration and edge retention and in terms of innovation for materials used and for the construction techniques.

Blade: SanMai ZDP189 and ATS-34 stainless steel at 67.4 HRC
Handle: Same (real stingray leather) and aircraft aluminum with black alumite treatment at Hv400
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closure: Liner Lock in 402J2 steel at 52HRC
Clip: 402J2 to 52HRC steel
Notes: Accompanied by a guarantee certificate with technical specifications.

Knife withdrawn from a private collection - Excellent condition, has small marks and scratches on the titanium sleeve, factory sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Tactical / EDC / Collection

Type of production: semi-artisan
Country of production: USA
Blade: in CTS-XHP Black stainless steel
Blade treatment: Black PVD
Handle: Grade 5 titanium
Blade length: 92mm.
Blade thickness: 5mm.
Length closed: 122mm.
Total length: 216mm.
Thick when closed: 13.2mm.
Balancing: -
Weight: 187g.
Opening: titanium thumbstood for right-handers
Washers: Steel ball bearings
Closing: Framelock
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Knife withdrawn from a private collection - Model discontinued by WE KNIFE - Like new condition, with original packaging - Checked, certified by our internal laboratory Collini Cutlery

Intended use: Sports / Collection

Type of production: Industrial
Country of production: China
Blade: CPM-S35VN 59 / 61HRC stainless steel
Blade treatment: dual tone, satin & black PVD
Handle: 6AL4V titanium machined with numerical control
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 114g.
Closing: Framelock
Clip: 6AL4V titanium
Packaging: cardboard box with We Knife Co. logos
Notes: Carson Flipper opening system on ceramic ball bearings

Intended use: Collection

Type of production: Artisan by Maestro CIC Sergio Consoli
Lama production: Italy
Blade: full-tang in RWL-34 60 / 61HRC stainless steel
Blade treatment: -
Handle: carbon fiber
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 138g.
Closing: Liner Lock
Clip: carbon fiber
Sheath: -
Packaging:
Notes: Handmade by Maestro Sergio Consoli - knife number 271 made in 2009

Acknowledgments

I currently make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:

in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded the "best table on display"

always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"

moreover, I ranked second in the competition organized by LAME D'AUTORE magazine as the best fixed hunting blade

then in 2007 at "Scarperia" I won the third prize as the best closable

but above all again in 2007, I achieved, to my great satisfaction, the level of MASTER OF ITALIAN COLTELLINAI CORPORATION, recognition received at the first exam taken.

Presentation of the craftsman

Creating a hand knife is what I consider a real art form.
The satisfaction of seeing an object that comes from your own hands, that takes shape and that reaches mechanical, artistic and aesthetic perfection is what pays me more for all the hours of work and effort it takes to create a knife completely by hand.

The passion for "cutting irons" has always been in me since I was a child and has grown with me until the almost sudden decision to build my first knife on my own, it was a "need", almost an inner need that I couldn't put it off, my hands and my mind had to start creating, of course what I had always been passionate about ... the knife!

I started at 40, in 2003, practically self-taught, I had no manual work experience, but I had been a mechanical designer for many years and this allowed me to know perfectly the technique and all the various stages of mechanical processing.

Currently I am a member, with the rank of Maestro, which is the highest, of the Italian Knifemakers Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.

What I do now is what I consider my art form ..., to create "handmade, hunting and collectible knives".

They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I make above all folding knives, which satisfy more my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they cannot be seen, is what distinguishes a hand-made knife from an industrially made one .

The mechanics must then be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.

Of course, over the years I have refined my technique and currently I have improved even more the mechanics by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction and with an incredible sweetness.

With regard to the blades, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow exceptional wire holding and cutting quality for all types of use.

Pathically I make all the knives on my initial design, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "handmade".

Regarding the materials that I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damask, both stainless steel and carbon, for the uniqueness 'that they donate to the knife, since each damask is always different from another.

For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of colors, all beautiful, I also use the fossil ivory of mammoth, various briars, titanium and carbon fiber.

Most of the knives, however, are made entirely of steel, in order to then be engraved, always and rigorously by hand, to transform the knife even more into a real work of art ...

Collector's knife from a private collection - Model TTFF1 by Medford with custom Black Blood treatment and black coating of the sleeve by Dino Picco by Wander Tactical - Excellent condition with original box - Regrinded - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Tactical / Collection

Type of production: Custom
Blade production: Usa
Blade: D2 steel
Blade treatment: -
Handle: aluminum and titanium
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 245mm.
Thick when closed: 13mm.
Balancing: on the guard branch
Weight: 252g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packaging: polymer tactical case with Medford logos
Notes: Designed and built by Greg Medford - Black Blood blade treatment and handle repainted by Wander Tactical designer Dino Picco

Intended use: Hunting / Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: CPM-154CM stainless steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 127mm.
Blade thickness: 5mm.
Total length: 244mm.
Balancing: advanced
Weight: 168g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -

Intended use: Outdoor

Type of production: Semi-Industrial
Country of production: USA
Blade: A2 steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 10mm.
Blade thickness: 5mm.
Total length: 230mm.
Balancing: advanced
Weight: 192g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -

Intended use: Outdoor

Type of production: Semi-Industrial
Country of production: USA
Blade: CPM-3V steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 145mm.
Blade thickness: 4mm.
Total length: 270mm.
Balancing: advanced
Weight: 194g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -

Custom by Kevin Wilkins from 2005 from a private collection provided with original certificates signed by the craftsman.

Slight regrinding, perfectly centered blade with good retention from closed, fluid opening movement and blade without any horizontal or vertical clearance once opened. The frame lock engages in the first quarter of the race without any uncertainty and without sticking.

Globally in good condition, it shows some small marks on the G11 handles and on the back and belly of the liners. A small abrasion on the blade, on the right side near the tip of the knife.

Intended use: collection

Type of production: artisanal
Country of production: Germany
Blade: CPM-S90V stainless steel
Finish: Satin
Handle: jade Titanium and G11
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 110mm.
Total length: 188mm.
Thick when closed: 15.8mm
Weight: 158g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: with original warranty certificates - produced in March 2005 - from a private collection

Intended use: collection

Type of production: mid tech
Country of production: USA
Blade: CPM-154CM stainless steel
Blade treatment: Blackwash
Handle: Aluminum
Blade length: 94mm.
Blade thickness: 5mm.
Length closed: 130m.
Total length: 226mm.
Thick when closed: 16mm.
Weight: 128g.
Closing: Plunge Lock
Clip: in steel
Notes: numbered series
Packaging: in cardboard with Brian Tighe and Friends logos, Design by Brian Tighe, opening system on IKBS type ball bearings with Carson Flipper type opening

Destination of use: collection

Type of production: semi-custom
Lama production: USA
Blade: 154CM stainless steel
Lama treatment: Satin
Handle: G10
Blade length: 94mm.
Blade thickness: 5mm.
Length closed: 130m.
Total length: 226mm.
Thick when closed: 16mm.
Balancing: -
Weight: 134g.
Closing: Plunge Lock
Clip: in steel
Notes: numbered series
Packaging: cardboard with logos Brian Tighe and Friends, Design by Brian Tighe, opening system on ball bearings of type IKBS with Carson Flipper opening

Intended use: Outdoor / Tactical

Type of production: semi-industrial
Country of production: USA
Blade: full tang in CPM-3V steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 195mm.
Blade thickness: 5mm.
Total length: 327mm.
Balancing: advanced
Weight: 380g.
Sheath: in leather
Packaging: Cardboard box with Bark River logos
Note: -

Purpose : Hunting / Outdoor / Bushcraft
Type of production : Semi-Industrial
Country of production : USA Blade : A2 steel at 58HRC
blade Treatment : -
Handle : Green Canvas Micarta
blade length : 103mm.
blade thickness : 4mm.
Length closed : -
total length : 212mm.
thickness when closed : -
Balancing : -
Weight : 126g.
Closing : -
Clip : -
Sheath : brown leather, style Loveless
Pack : Cardboard box with logos Bark River
Notes : -