Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.

Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs

Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm

Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 83g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory



Use: Tactical / Military

Blade: Stainless steel 154CM 58/60 HRC with PVD treatment
Handle: Zytel
Blade length: 95 mm.
Blade thickness: 3 mm.
Total length: 220 mm.
Length closed: 125 mm.
Weight: 115 g.
Clip: stainless steel
Locking system: liner lock with additional safety lock

Intended use: sporting/collection
Type of production: artisan
Blade production: Italy
Blade: Stainless steel X50CrMoV15
Blade treatment: -
Handle: Raw ox horn
Blade length: 70mm.
Blade thickness: 1,6mm.
Length closed: 90mm.
Total length: 160mm.
Weight: 53g.
Closure: without blade lock
Packaging: cardboard box
Sheath: -

Craftsmanship is beautiful because it is varied

The colours of the materials from which the handicrafts are made may vary from those shown in the pictures.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: that's the beauty of fine materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: that's the beauty of fine workmanship. Combine all this and you have a product that is always different and unique. And always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.

Knife withdrawn from a private collection - In like new condition, original sharpening, without original box - Checked and certified by our in-house Coltelleria Collini laboratory.

After two years of collaboration with expert military instructor Frank Heyl, Gerber is delighted to bring to market what they themselves define as the strongest military / survival knife ever built. quick to change the handle, but also so robust that it can pierce an aircraft fuselage but also simply be used as a hammer, glass breaker or throwing knife.

Intended use: Military

Type of production: industrial
Blade: 12C27 stainless steel
Blade treatment: TiNi - Titanium Nitriding
Production Lama: USA
Handle: non-slip in fiberglass and nylon
Blade length: 125mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 275mm.
Balancing: 3cm back.
Weight: 330g.
Closure: -
Clip: -
Sheath: Nylon and fire retardant anti-slip polymers, M.O.L.L.E. system, ultra-flat to limit the overall dimensions, integrated sharpener
Notes: Skullcrasher / Hammer in stainless steel and slots for wrist strap or to be used with a rod to create a spear.

Intended use: Tactical / Hiking

Type of production: industrial
Blade: full tang, 420HC stainless steel
Blade Treatment: Ceramic Coating
Blade production: USA
Handle: fiberglass and nylon with non-slip rubberized polymers
Blade length: 122mm.
Blade thickness: 5mm.
Total lenght: 248mm.
Balance: set back 1cm.
Weight: 204g.
Scabbard: Nylon and polymer, multi-position and MOLLE compatible.
Notes: Rear skullcrasher that integrates the hole for the wrist strap.

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 7Cr17Mov stainless steel
Blade treatment: Teflon coating
Handle: Aluminum
Blade length: 25.4mm.
Blade thickness: 3.8mm.
Length closed: 50.8mm.
Total length: 76.2mm.
Weight: 66g.
Closing: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Gerber logos
Notes: Opening via Carson Flipper system

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 7Cr17Mov stainless steel
Blade treatment: Satin finish
Handle: Aluminum
Blade length: 25.4mm.
Blade thickness: 3.8mm.
Length closed: 50.8mm.
Total length: 76.2mm.
Weight: 66g.
Closing: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Gerber logos
Notes: Opening via Carson Flipper system

Intended use: sports

Type of production: Industrial
Country of production: China
Blade: Stainless steel 7Cr17Mov
Blade treatment: Satin finish
Handle: Aluminum
Blade length: 74mm.
Blade thickness: 2.7mm.
Closed length: 98mm.
Total length: 169mm.
Weight: 115g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Gerber logos
Note: -

Important notice: due to Gerber's technical and packaging choices (painted aluminum instead of anodized and poorly protected knife in its packaging), we point out that these articles, although they are new from the factory and come from the manufacturer, already present small imperfections and abrasions that undermine aesthetic perfection. We therefore recommend the purchase only to concrete users and we advise against buying them instead from collectors.

Intended use: sports

Type of production: Industrial
Country of production: China
Blade: Stainless steel 7Cr17Mov
Blade treatment: Stonewashed
Handle: Stainless Steel and G10
Blade length: 97mm.
Blade thickness: 3.8mm.
Length closed: 119mm.
Total length: 216mm.
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with Gerber logos
Note: -

Intended use: sports

Type of production: Industrial
Country of production: China
Blade: Stainless steel 7Cr17Mov
Blade treatment: Stonewashed
Handle: Stainless Steel and Aluminum
Blade length: 97mm.
Blade thickness: 3.8mm.
Length closed: 119mm.
Total length: 216mm.
Weight: 150g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with Gerber logos
Note: -

Important notice: due to the technical and packaging choices of Gerber (painted aluminum instead of anodized and knife fixed with a plastic band in the cardboard box that physically "scrapes" the paint of the handle), we point out that these articles, although factory new and from the manufacturer, they already present small imperfections and abrasions that undermine their aesthetic perfection. We therefore recommend the purchase only to concrete users and we advise against buying them instead from collectors.

Intended use: Survival / Utility / Hiking

Type of production: Industrial
Lama production: Taiwan
Blade: full tang, in 9Cr19MoV stainless steel
Blade treatment: satin finish
Handle: rubber
Blade length: 135mm.
Blade thickness: 4.2mm.
Length closed: -
Total length: 265mm.
Thick when closed: -
Balancing: -
Weight: 206g.
Closing: -
Clip: -
Sheath: in Nylon
Packaging:
Note:

The artisans of Berkel have created an exclusive series of switchblade knives. The search for steel for the blade and fine materials for the handle, make these knives real collectibles. These unique pieces are numbered one by one by Berkel's cut masters.

- Blade material: Damaged steel San Mai 67 VG10 (60/61 HRC)
- Blade length: 11 cm long blade
- Total length: 25.5 cm
- Weight: 78 gr
- Sharpening: Smooth
- Handle: Composed of two wooden grips. Decorated with glossy black logo.
- Notes: no box, with vinyl case.

The series Kilama by Consigli is a modern interpretation of Italian regional knives.
The materials and finishes remain the same as always but the line has the form "new"

Total length: 185
Blade length: 80
Blade thickness: 2.5
Weight. 55g
Steel: 420
Hanfle: amaranth wood
Sheath: -
Package: box with cleaning kit

Intended Use: Tactical / Hiking

Type of production: Industrial
Blade: full tang, stainless steel 420HC
Treatment Lama: Ceramic Coating
Production Lama USA
Handle material: fiberglass and nylon with rubbered anti slip polymer
Blade length: 122mm.
Blade Thickness: 5mm.
Overall length: 248mm.
Balancing: backward 1cm.
Weight: 204g.
Sheath: Nylon and polymers, MOLLE compatibile
Notes: Skullcrasher with hole

This slender-shaped knife with a curved handle derives from ancient models used by the shepherds of Abruzzo. Its adoption in the repertoire of knives manufactured in Scarperia (where the particular crease of the handle earned it the name of "hunchback") dates back to the late nineteenth century and took place without flashy changes compared to the original type, equipped with a simple spring and one-piece bovine horn handle. This model is in horn tip.

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 105mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 247mm.
Weight: 107g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

The first certain information on this knife dates back to 1848. A specimen, dated 1871, is kept in the State Archives of Florence, attached to the documents of a trial against a convicted person. The mark of a Scarperia manufacturer, Gustavo Buffi, is clearly visible on it, the shape of the blade is that with an angled back, also maintained in the twentieth century and present in the catalogs of various firms in Scarperia. The Maremmano is a horn tip model.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 120g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

A native of Calabria, this knife by the blade and pointed straight but has a handle in the most typical style of Scarborough, has a seal consists of two rings round, similar to Fiorentino, although smaller. It is supposed to have been in the past a major reworking of the knives typical Calabrian by the craftsmen of Scarperia that as often happened then have been extensively used to their own tradition. Model in horn tip.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tip

The "Neapolitan" old drives is a knife in horn tip elongated, suitable to cut the use of tip. It is not clear which of the knives of the traditional Neapolitan is inspired model of Scarperia. The general line is somewhat related to the "Maremma" in the form assumed in the Mugello, but with more slender proportions and read.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tip

The most striking feature of this model is in the edge of the blade, a full right to the tip. The Casertano lent itself well to a variety of uses, thanks to the cutting edge straight that finishes in a very simply shaped handle. This solution was very appreciated in different times and places, even outside the area where it originated, as to be still widespread. The Caserta is a model in horn tip.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 70 gr.
Handle in horn tip

Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 170mm.
Weight: 34g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 50g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

Survival Bracelet

Useful in phase Hiking, this bracelet can be articulated in such a way as to have available, in case of emergency or need. over 3.5m Nylon Paracord . Made in one size, fits every wrist and can be fastened and unfastened with one hand , thanks to the closure by drawstring . It also incorporates a practical and compact emergency whistle , to be heard at a distance.

- 3.65m Paracord Bracelet made from Nylon , swivel all'occrenza
- One Size
- Can be fastened and unfastened with one hand
- Emergency Whistle
- Small manual emergency survival tips from Bear Grylls

The board of Bear Grylls :

" Take him with you always! In the city is a trendy bracelet , but in nature it can save you from bad situations in case of emergency and necessity. Use it as a tow rope to tie together tools, knives and sticks or as a makeshift tourniquet , it will be a reliable companion and invisible. "

The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Weight: 63g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Zuava Cattle Polished R-ZVC19 - knife

Traditional knife of Scarborough and is used in all of Tuscany to the first 800. He had an element of novelty, for its time: the metal frame inside the handle as well in traditional cattle.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 19 cm.
Weight 100 gr.

Traditional Scarperia knife and used throughout Tuscany until the early 1800s. It had an element of novelty, for the time: the metallic structure inside the handle as well as in the traditional bovine.

440 stainless steel blade.
Blade length 8 cm.
Blade thickness 3 mm.
Open length 19 cm.
Weight 100 gr.

Intended use: collection

Type of production: handmade
Country of Production: Scarperia - Italy
Blade: stainless steel X50CrMoV15
Blade finish: satin-finished
Handle: ox horn and brass
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Weight: 193g.
Closure: blade lock
Packaging: cardboard box with Consigli logos
Sheath: fabric pouch

Handicrafts are beautiful because they are varied!
The colors of the materials from which crafts are made may vary from those shown in the pictures.

Horn, deer, and wood are raw materials that by their nature have distinct variability from one supply to the next-that's the beauty of fine materials. Add craftsmanship, where the artisan's hand never makes the same gesture: that's the beauty of craftsmanship. Combine all this and you have a product that is always different and unique. Always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.

Palmerino horn cattle PA2C20 two knives - knife

The production of Scarborough has not devoted much attention to penknives.
It was, however, made a template from the desk, which in the past was used to make the tip of the quill pens and pencils.
This sharpener Scarperia was always devoid of spring and could have from one to two blades; unmistakable the shape of the handle, in a single piece of horn.
In the catalogs of the early years of the twentieth century these items were listed as "sharpeners use Palmerini" which was actually the name of a renowned manufacturer of the nineteenth century.
Proposed model is at the tip of the horn two blades.

Stainless steel blade 440.
Blade length 4.6 cm.
Blade thickness 2.5 mm.
Overall length 15 cm.
Weight 40 gr.

Rasolino in bovine RAC-20 - Knife

The name of this knife comes from the shape of the blade, reminiscent of the razor.
Had spread following the law Giolitti in 1908 which placed severe limitations to the port of sharp knives, and that favored the production of various models in a truncated tip.
  The Rasolino is distinguished by the slight curvature of the blade and back to the shape of the handle.

Stainless steel blade 440.
Blade length 9 cm.
Blade thickness 2.5 mm.
Overall length 20 cm.
Weight 70 gr.

The silver Fiorentino version has the same construction characteristics as the classic Fiorentino, but it is made with silver finishes, in the lily, in the band and in the rings worked by hand by skilled engravers. Horn tip model.

Intended use: sports / collection

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and Silver with handcrafted engravings
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 76g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which our handcrafted products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ox horn
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 190mm.
Weight: 79g.
Closing: without blade lock
Packaging: cardboard box
Sheath: -

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Mugello 16 cm horn cattle raw E-CMC16G - knife

Blade: 420 stainless steel
Handle: raw beef
Blade length: 75mm.
Overall length: 165mm.
Weight: 39g.
Closed Length: 90mm.

CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.

Ghiandina 16 cm horn cattle raw E-GHC16G - knife

Blade: 420 stainless steel
Handle: raw beef
Blade length: 70mm.
Overall length: 160mm.
Weight: 36g.
Closed Length: 90mm.

CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.

This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of ram's horn are affected by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 120mm.
Total length: 215mm.
Weight: 53g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of ram's horn are affected by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox wood
Blade length: 70mm.
Blade thickness: 2mm.
Length closed: 95mm.
Total length: 170mm.
Weight: 35g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

Roman Ring with polished horn cattle R-RMC30A - knife

Antique knife initially in use in the Roman countryside, and then in Rome at the time of the papal city. Often, the rustic character of duels, it was designed primarily as a weapon. The blade is made of carbon steel with locking blade. The cow horn handle. Variable length. These knives are made from "Conaz" only on demand, thereby making each one as unique.

Intended Use: Collection

Type of production: craft
Blade: carbon steel
Treatment Blade: -
Production Blade: Italy
Handle: Horn Cattle Etched
Blade length: 130mm.
Blade Thickness: 2.5mm.
Closed Length: 160mm.
Overall length: 290mm.
Balancing: -
Weight: 106g.
Closure: Without Rear Blade
Clip: -
Sheath: -
Notes: -

Destinazione d'uso: Sportivo/Escursionismo

Tipo di produzione: Industriale
Produzione Lama: China
Lama: in acciaio inox 5Cr13
Trattamento Lama: Verniciatura
Manicatura: Polimeri gommati
Lunghezza lama: 89mm.
Spessore lama: 6mm.
Lunghezza chiuso: -
Lunghezza totale: 242mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 590g.
Chiusura: -
Clip: -
Fodero: in Nylon, da cintura, con chiusura a velcro
Confezione: Scatola di cartone con loghi Gerber e Bear Grylls
Note: Piccolo manuale di sopravvivenza incluso

Destinazione d'uso: Escursionismo Leggero

Tipo di produzione: Industriale
Produzione Lama: China
Lama: in acciaio al carbonio 1055
Trattamento Lama: Verniciatura
Manicatura: Polimeri gommati
Lunghezza lama: 236mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: -
Lunghezza totale: 380mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 385g.
Chiusura: -
Clip: -
Fodero: Cordura
Confezione: Scatola di cartone con loghi Gerber e Bear Grylls
Note: Piccolo manuale di sopravvivenza incluso

Characteristic Sardinian knife, typical of the Arbus area, blade with a characteristic bellied shape, very suitable for leather.

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver with handcrafted engravings
Blade length: 85mm.
Blade thickness: 2.5mm.
Length closed: 15mm.
Total length: 205mm.
Weight: 73g.
Closing: without blade lock
Packaging: cardboard box
Sheath: fabric case
Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.

Type of production: artisan

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: bovine horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 200mm.
Weight: 70g.
Closing: without spring
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Le prime notizie certe su questo coltello risalgono al 1848. Un esemplare, datato 1871, è conservato nell'Archivio di Stato di Firenze, allegato agli atti di un processo a carico di un pregiudicato. Su di esso è ben visibile il marchio di un fabbricante di Scarperia, Gustavo Buffi, la forma della lama è quella con dorso angolato, mantenuta anche nel Novecento e presente nei cataloghi di varie ditte scarperiesi. Il Maremmano è un modello in punta di corno. 

Lama. in acciaio inox 440, 
Manicatura: in corno bovino lucido
Lunghezza totale 200 mm
Lunghezza lama: 90 mm 
Affilato a mano

ATTENZIONE: trattandosi di materiale naturale, la colorazione del corno può risultare diversa da quella presente in foto.

Knife in use for certain information until the first half of the 19th century in the Tuscan and Lazio Maremma.
Through finds from the criminological museum of Rome, he was seen among those knives handed over by the rioters of the penal baths of Civitavecchia to Cardinal Franco Pentini, in 1848, sent to put down a revolt.

Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: olive wood
Blade length: 80mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 205mm.
Weight: 56g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

The craftsmanship is beautiful because it is varied

The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.

This knife owes its name to the blunt tip which is absolutely missing as if the blade had been cut off.
Pointless knives became much more widespread with the "Giolitti law" of 1908 which fixed the length of the blade of pointed knives at only four centimeters.
For mozzette, the limit rose to ten centimeters, offering the possibility of safely carrying a knife of sufficient size in your pocket without risking the rigors of the law.

Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 185mm.
Weight: 63g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

The craftsmanship is beautiful because it is varied

The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.

This Pattada constitutes the now historical interpretation of the Sardinian knife made by the Scarperia Consigli company.
The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition.
Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver with handcrafted engravings
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 120mm.
Total length: 215mm.
Weight: 62g.
Closing: without blade lock
Packaging: cardboard box
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 76g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

The name clearly indicates the area of ​​origin, but this knife became part of Scarperia's production perhaps as early as the nineteenth century, taking over from an older model called "scimitar" due to the hollow shape of the back of the blade towards the tip.
The handle has no metal seals, apart from the tiny raperelle on which the three pins are pressed, is thinned at the end, making it particularly light, and is made of solid horn.

Intended use: sports / collection

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 197mm.
Weight: 73g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

Traditional knife produced by master cutlers in Scarperia, place where, since 1300, the craftsmanship of Italian knives continues.
Typical Piedmont knife, in use since the early 19th century also in Liguria. Originally from the village of Vernante (Cuneo).

The 420 stainless steel blade can be scimitar or straight.
On the upper part of the heel there is always the characteristic appendix with the head of a nail which, by housing a socket in the handle, allows the blade to be held steady with the knifted thumb.
Used for all agricultural and domestic work and, for the particular sharpening, also for carving wood.
The cattlemen also used it as a surgical tool to carve the belly of cattle grazing, when too much wet grass was ingested causing excessive accumulation of gas.

Total length: 200 mm
Blade length: 90mm
Handle: in full polished horn
Sharpened by hand

Traditional Scarperia knife and used throughout Tuscany until the early 1800s.
It had an element of novelty, for the time: the metal structure inside the handle. As well as in the traditional bovine, Consiglio proposes it today also in buffalo and exotic woods.

Intended use: sports / collection

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Buffalo horn
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 19mm.
Weight: 93g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

The version of the Zuava with sundial, very particular, carries on the blade the engraving of an ancient drawing of sundial, functioning. The hard is in brass.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 105mm.
Blade thickness: 3mm.
Length closed: 130mm.
Total length: 240mm.
Weight: 190g.
Closing: retention spring
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.