bing
News
Best news of March
Shop By
Shopping Options
Brand
  1. Acta Non Verba 17items
  2. Aitor 21items
  3. Antonini 20items
  4. Benchmade 279items
  5. BlackFox 35items
  6. Boker 245items
  7. Cold Steel 158items
  8. Coltelleria Collini 54items
  9. Consigli 55items
  10. CRKT 99items
  11. Due Cigni 1item
  12. Extrema Ratio 301items
  13. Fallkniven 100items
  14. Fox Knives 402items
  15. Gastronom Knives 1item
  16. Global Knives 3items
  17. Horl 6items
  18. Ka Bar 77items
  19. Kai Knives 8items
  20. Laguiole en Aubrac 95items
  21. Leatherman 7items
  22. Lion Steel 128items
  23. Maserin 220items
  24. Mcusta 75items
  25. Nitecore 13items
  26. Opinel 86items
  27. Pfeil 7items
  28. Roselli 18items
  29. Saji Takeshi 45items
  30. Sanelli 7items
  31. Spyderco 203items
  32. Victorinox 44items
  33. Viper 203items
  34. Wahl 1item
  35. Wusthof 6items
  36. Zero Tolerance 105items
  37. Zwilling 3items
  38. Approved 174items
  39. Peltonen 9items
  40. ADV Tactical 24items
  41. Ahti 10items
  42. Al-Mar 6items
  43. Andrew Demko Knives 5items
  44. Arkansas 2items
  45. ATC 4items
  46. Azero 3items
  47. Bark River 10items
  48. Basko 1item
  49. Bastinelli Knives 12items
  50. Bear and Son 1item
  51. Begg Knives 7items
  52. Beltrame 1item
  53. Benchmark 1item
  54. Beretta 2items
  55. Berkel 1item
  56. Berti 3items
  57. BlachHawk Blades 10items
  58. Blackjack 10items
  59. Blade Magazine 12items
  60. BladeTech 1item
  61. Bradley 5items
  62. Brian Tighe and Friends 4items
  63. Browning 2items
  64. Brusletto 1item
  65. Buck 28items
  66. Busse 0items
  67. Carl Schlieper 6items
  68. Case 13items
  69. Cesare Tonelli 7items
  70. Chris Reeve Knives 58items
  71. Citadel 32items
  72. Combative Edge 5items
  73. Corey Sar Fox 2items
  74. Crusader Forge 1item
  75. David 4items
  76. DMT 4items
  77. Douk Douk 5items
  78. Dovo 2items
  79. Down Under Knives 10items
  80. DPX Gear 8items
  81. DuStar 1item
  82. Eickhorn 9items
  83. Elite Tactical 2items
  84. Emerson 12items
  85. Enzo 20items
  86. EOS 13items
  87. Esee Knives 16items
  88. Estas 1item
  89. F. Pachì 1item
  90. Fantoni 40items
  91. Forge de Laguiole 6items
  92. Freeman Outdoor Gear 11items
  93. G. Sakai 4items
  94. Gary Bradburn 1item
  95. Gatco 2items
  96. Gerber 44items
  97. Gilles 6items
  98. Glock knives 7items
  99. Guardian Tactical 20items
  100. Halcon Spain 3items
  101. Hardcore Hardware 2items
  102. Heckler and Kock 1item
  103. Helle 15items
  104. Herold 6items
  105. Hikari Japan 6items
  106. Hoffner Knives 18items
  107. Hogue Knives 10items
  108. Hollywood Collectibles Group 11items
  109. HTM Knives 1item
  110. Ibberson 1item
  111. Indiana Jones 1item
  112. Jaguar Knives 8items
  113. JetBeam 1item
  114. Kanekoma 5items
  115. Kanetsune 2items
  116. Karhunkynsi Puukko 2items
  117. Kasumi 2items
  118. Kauhavan Puukkopaja 3items
  119. Kershaw 48items
  120. Kiku Knives 13items
  121. Koji Hara 3items
  122. La Cantina 10items
  123. La Passion des Couteaux 1item
  124. Lame D'autore 40items
  125. Lansky 4items
  126. Linder 22items
  127. Lodge 1item
  128. Lone Wolf 9items
  129. Mac 11items
  130. Master Cutlery 4items
  131. Master of Defense 3items
  132. Maxpedition 3items
  133. MedFordKnives 47items
  134. Mercury 3items
  135. Microtech 14items
  136. Mil Tac 4items
  137. Minosharp 4items
  138. Mission 4items
  139. MKM 84items
  140. Mora Kniv 14items
  141. Muela 3items
  142. Nepal Kukri 44items
  143. Nieto 5items
  144. Nilte 2items
  145. No Brand 43items
  146. Norton 1item
  147. Olamic Cutlery 5items
  148. Ontario 49items
  149. Original Usa 15items
  150. Othello 10items
  151. Piscitelli 2items
  152. Pohl Force 76items
  153. Puma 1item
  154. Quartermaster 19items
  155. Randall 3items
  156. Red Claw 4items
  157. Remington 1item
  158. RH Preyda 8items
  159. Rick Hinderer Knives 11items
  160. Rivista Coltelli 38items
  161. Rockstead 27items
  162. Sandrin Knives 7items
  163. Sanelli Ambrogio 4items
  164. Santa Fe 2items
  165. Saturn Knives 2items
  166. Sergio Consoli 2items
  167. Smith and Wesson 9items
  168. SOG 43items
  169. Spartan Blades 54items
  170. Stangen 1item
  171. Stedemon Knife Co. 2items
  172. Steel Will 2items
  173. Steel X 1item
  174. Strider 25items
  175. Taidea 2items
  176. Takefu knives 5items
  177. Tasmanian Tiger 3items
  178. TB Outdoor 11items
  179. Timberline 1item
  180. Tops Knives 88items
  181. TRC Knives 7items
  182. Tridentum 3items
  183. Ulticlip 3items
  184. United Cutlery 26items
  185. Valyrian Steel 1item
  186. Waffentechnik 5items
  187. WanderTactical 300items
  188. We Knife Co. 3items
  189. White River Knife and Tool 28items
  190. Wildsteer 11items
  191. Windlass 4items
  192. Work Sharp 3items
Less
Stock
  1. In Stock 8items
  2. Out of Stock 292items
Rating
  1. 5
    23items
  2. 4
    & up
    42items
  3. 3
    & up
    44items
Set Ascending Direction

Items 97-144 of 300

Page
  1. Wander Tactical - Smilodon - Marble and Green Micarta - handmade knife

    Production type: Heavy duty hiking / Collection

    Production type: Handmade
    Country of Production: Italy
    Blade: D2 steel at 59/60HRC
    Blade Treatment: Marble
    Handle: Micarta
    Blade length: 180mm.
    Blade thickness: 6.5mm.
    Total length: 360mm.
    Balance: set back from the guard branch
    Weight: 644g.
    Scabbard: Kydex, thermoformed
    Packaging: unpacked, accompanied by certificate of authenticity
    Notes: Each knife is unique and made entirely by hand

    WT-SM-MBGM
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  2. Wander Tactical - Centuria knife - Serial VIII - Prototype Limited Edition - Custom knife

    Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely hand-made limited series of prototypes, in just 10 specimens, all different from each other, of the new Centuria fixed blade model that smoothly blends the typical design together. of ancient Roman daggers with iconic American World War II combat knives.


    Intended use: Collection

    Type of production: Artisan
    Country of production: Italy
    Blade: in D2 steel at 59 / 60HRC
    Blade treatment: Raw
    Handle: Micarta
    Blade length: 180mm.
    Blade thickness: 5.5mm.
    Total length: 315mm.
    Balancing: advanced
    Weight: 393g.
    Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible
    Packaging: unpacked - supplied with certificate of originality and Wander Tactical guarantee
    Notes: This knife is part of an exclusive lot of handcrafted prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, processes, bevels and grindings that make the 10 pieces all completely different from each other.

    WT-CE-PR-VIII
    €737.70
    Only -50 left
    Only -50 left
    Out of stock
  3. Wander Tactical - Centuria - Serial VII - Prototype Limited Edition - Custom Knife

    Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely handmade limited edition of prototypes, in only 10 pieces all different from each other, of the new fixed blade model Centuria that smoothly blends together the typical design of the ancient Roman daggers with the iconic American combat knives of World War II.

     


    Intended Use: Collection

    Type of production: Artisan
    Country of Production: Italy
    Blade: D2 steel at 59/60HRC
    Blade Treatment: Raw
    Handle: Micarta
    Blade length: 180mm.
    Blade thickness: 5.5mm.
    Total length: 315mm.
    Balance: Advanced
    Weight: 393g.
    Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible.
    Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
    Notes: This knife is part of an exclusive batch of handmade prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, machining, bevelling and grinding that make the 10 examples all completely different from each other.

    WT-CE-PR-VII
    €655.74
    Only -50 left
    Only -50 left
    Out of stock
  4. Wander Tactical - Centuria - Serial IX - Prototype Limited Edition - Custom Knife

    Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely handmade limited edition of only 10 different prototypes of the new Centuria fixed blade model that smoothly blends together the typical design of ancient Roman daggers with the iconic American combat knives of World War II.

     


    Intended Use: Collection

    Type of production: Artisan
    Country of Production: Italy
    Blade: D2 steel at 59/60HRC
    Blade Treatment: Raw
    Handle: Micarta
    Blade length: 180mm.
    Blade thickness: 5.5mm.
    Total length: 315mm.
    Balance: Advanced
    Weight: 393g.
    Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible.
    Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
    Notes: This knife is part of an exclusive batch of handmade prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, machining, bevelling and grinding that make the 10 examples all completely different from each other.

    WT-CE-PR-IX
    €737.70
    Only -50 left
    Only -50 left
    Rating:
    73%
    3.7
    Out of stock
  5. Wander Tactical - Lynx Bushman knife - Dual Tone - Brown Micarta - custom knife

    Destinazione d'uso: Utility / Collezione

    Tipo di produzione: Artigianale
    Paese di produzione: Italia
    Lama: in acciaio D2 a 59/60HRC
    Trattamento lama: Raw
    Manicatura: Micarta
    Lunghezza lama: 105mm.
    Spessore lama: 6mm.
    Lunghezza totale: 235mm.
    Bilanciatura: arretrata
    Peso: 319g.
    Fodero: in cuoio marrone
    Confezione: privo di imballo - fornito con certificato di originalità e garanzia Wander Tactical
    Note: Ogni coltello è unico e realizzato artigianalmente; possono esserci leggere differenze di finiture, colori e materiali rispetto al prodotto fotografato.

    WT-LY-BUBR
    €323.77
    Only -50 left
    Only -50 left
    Out of stock
  6. Wander Tactical - Centuria - Serial X - Prototype Limited Edition - custom knife

    Dino Picco, knife maker and lead designer of Wander Tactical, has created a limited edition of only 10 different prototypes of the new fixed blade model Centuria, which smoothly blends together the typical design of ancient Roman daggers with the iconic American combat knives of World War II.

     


    Intended Use: Collection

    Type of production: Custom
    Country of Production: Italy
    Blade: D2 steel at 59/60HRC
    Blade Treatment: Raw
    Handle: Micarta
    Blade length: 180mm.
    Blade thickness: 5.5mm.
    Total length: 315mm.
    Balance: Advanced
    Weight: 393g.
    Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible.
    Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
    Notes: This knife is part of an exclusive batch of handmade prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, machining, bevelling and grinding that make the 10 examples all completely different from each other.

    WT-CE-PR-X
    €655.74
    Only -50 left
    Only -50 left
    Rating:
    100%
    5
    Out of stock
  7. Wander Tactical - Franken Folder - Raw & Burnt Green Micarta - Limited Edition - handmade knife

    Intended Use: Collection / Heavy Duty

    Kind of production: Handmade
    Country of Production: Italy
    Blade: D2 steel at 59/61HRC with cryogenic hardening
    Blade treatment: Raw
    Handle: 2mm titanium folder with micarta handle
    Blade length: 95mm.
    Blade thickness: 5mm.
    Length closed: 124mm.
    Total lenght: 214mm.
    Thickness when closed: 24mm.
    Weight: 193g.
    Opening: Carson Flipper system / Ambidextrous opening pins on the blade.
    Closure: Rockers Arm 8.11
    Clip: titanium stone washed, removable and reversible
    Package: Plastic case with Wander Tactical logos
    Notes: Limited Edition, entirely hand made, each piece is different from the previous one for aesthetic finishing.

    WT-FF-RB
    €450.82
    Only -50 left
    Only -50 left
    Out of stock
  8. Wander Tactical - Franken Folder - Mozzetta Blade - Limited Edition - handmade knife

    Intended Use: Collection / Heavy Duty

    Kind of production: Handmade
    Country of Production: Italy
    Blade: D2 steel at 59/61HRC with cryogenic hardening
    Blade treatment: Raw
    Handle: 2mm titanium folder with micarta handle
    Blade length: 95mm.
    Blade thickness: 5mm.
    Length closed: 124mm.
    Total lenght: 214mm.
    Thickness when closed: 24mm.
    Weight: 193g.
    Opening: Carson Flipper system / Ambidextrous opening pins on the blade.
    Closure: Rockers Arm 8.11
    Clip: titanium stone washed, removable and reversible
    Package: Plastic case with Wander Tactical logos
    Notes: Limited Edition, entirely hand made, each piece is different from the previous one for aesthetic finishing.

    WT-FF-MO
    €450.82
    Only -50 left
    Only -50 left
    Out of stock
  9. Wander Tactical - Special Commando knife - Brown Micarta - custom knife

    special knife made by Wander Tactical in April 2021

    Type of production: Artisan
    Production Lama: Italy
    Blade: stainless steel Nitro-B 58 / 59HRC
    Blade treatment: Proto
    Handle: Brown Micarta
    Blade length: 115mm.
    Blade thickness: 5mm.
    Total length: 270mm.
    Balancing: on the branch of gurdia
    Weight: 284g.
    Sheath: in kydex and leather
    Packaging: -
    Notes: unique piece

    WT-SC-BBM
    €483.61
    Only -50 left
    Only -50 left
    Out of stock
  10. Wander Tactical - Special Commando knife - Brown Micarta - custom knife

    special knife made by Wander Tactical in April 2021

    Type of production: Artisan
    Production Lama: Italy
    Blade: stainless steel Nitro-B 58 / 59HRC
    Blade treatment: Proto
    Handle: Brown Micarta
    Blade length: 115mm.
    Blade thickness: 5mm.
    Total length: 270mm.
    Balancing: on the branch of gurdia
    Weight: 284g.
    Sheath: in kydex and leather
    Packaging: -
    Notes: unique piece

    WT-USC-BM
    €483.61
    Out of stock
  11. Wander Tactical - Special Commando knife - Brown Micarta - custom knife

    special knife made by Wander Tactical in April 2021

    Type of production: Artisan
    Production Lama: Italy
    Blade: stainless steel Nitro-B 58 / 59HRC
    Blade treatment: Proto
    Handle: Brown Micarta
    Blade length: 115mm.
    Blade thickness: 5mm.
    Total length: 270mm.
    Balancing: on the branch of gurdia
    Weight: 284g.
    Sheath: in kydex and leather
    Packaging: -
    Notes: unique piece

    WT-SC-BM
    €483.61
    Only -50 left
    Only -50 left
    Out of stock
  12. Wander Tactical - Hurricane Folder knife Gen. III - Drop Black PVD - folding knife

    Intended use: Heavy Duty / Hiking / Tactical / Collection

    Type of production: industrial
    Country of production: Italy
    Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
    Blade treatment: Black
    Handle: titanium folders with aluminum handle
    Blade length: 90mm.
    Blade thickness: 5mm.
    Closed length: 120mm.
    Total length: 210mm.
    Thick when closed: 13.6mm.
    Balancing: -
    Weight: 160g.
    Opening: Carson Flipper system / ambidextrous opening pins on the blade
    Washers: in steel, with ball bearings made in Japan
    Closing: Rockers Arm 8.11
    Clip: titanium, removable and reversible
    Sheath: -
    Packaging: Plastic case with Wander Tactical logos
    Notes: 3rd generation 2019 production

    WT-HU-F
    €221.31
    Out of stock
  13. Wander Tactical - Drago The Beast knife - Raw Finish & Green Micarta - custom knife

    Type of production: Artisan
    Production Lama: Italy
    Blade: in D2 steel at 59 / 60HRC
    Blade treatment: Raw Finish
    Handle: Micarta
    Blade length: 2430mm.
    Blade thickness: 6.5mm.
    Total length: 400mm.
    Balancing: backward
    Weight: 712g.
    Sheath: in thermoformed kydex and leather
    Packaging: -
    Notes: exclusive model produced in just two pieces and handcrafted

    WT-DR-RM
    €795.08
    Out of stock
  14. Wander Tactical - Smilodon knife - Moon Effect & Black Micarta - custom knife

    Type of production: Artisan
    Production Lama: Italy
    Blade: in D2 steel at 59 / 60HRC
    Blade Finish: Moon Effect
    Handle: Micarta
    Blade length: 180mm.
    Blade thickness: 6.5mm.
    Total length: 360mm.
    Balancing: backward
    Weight: 644g.
    Sheath: in Kydex, thermoformed
    Packaging: -
    Notes: unique and handcrafted knife

    WT-SM-ME-B
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  15. Wander Tactical - Godfather knife - Raw Finish & Green Micarta - custom knife

    Type of production: Artisan
    Production Lama: Italy
    Blade: in D2 steel at 59 / 60HRC
    Blade treatment: Raw Finish
    Handle: Micarta
    Blade length: 240mm.
    Blade thickness: 6.5mm.
    Total length: 400mm.
    Balancing: backward
    Weight: 702g.
    Sheath: thermoformed kydex
    Packaging: -
    Notes: unique and handcrafted knife

    WT-GF-RF-GM
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  16. Wander Tactical - Godfather knife - Moon Effect & Black Micarta - custom knife

    Type of production: Artisan
    Production Lama: Italy
    Blade: in D2 steel at 59 / 60HRC
    Blade treatment: Moon Effect
    Handle: Micarta
    Blade length: 240mm.
    Blade thickness: 6.5mm.
    Total length: 400mm.
    Balancing: backward
    Weight: 715g.
    Sheath: thermoformed kydex
    Packaging: -
    Notes: unique and handcrafted knife

    WT-GF-MEGB
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  17. Wander Tactical - Tryceratops - Raw & Brown Micarta - custom knife

    Type of production: Handmade
    Blade Production: Italy
    Blade: D2 steel at 59/60HRC
    Blade treatment: Raw GunKote
    Handle: Micarta
    Blade Length: 70mm.
    Blade thickness: 6.5mm.
    Total length: 132mm.
    Balance: backward
    Weight: 190g.
    Scabbard: in thermoformed Kydex
    Package: unpacked, accompanied by certificate of authenticity with technical specifications
    Notes: Each knife is unique and handcrafted, there may be slight differences in finishes, colors and materials compared to the product photographed.

    WT-TR-RBM
    €147.54
    Out of stock
  18. Wander Tactical - Lynx Bushmann - Raw & Black Micarta - custom knife

    Intended Use: Utility / Collection

    Production type: Handmade
    Country of Production: Italy
    Blade: D2 steel at 59/60HRC
    Blade Treatment: Raw
    Handle: Micarta
    Blade length: 105mm.
    Blade thickness: 6mm.
    Total length: 235mm.
    Balance: backward
    Weight: 319g.
    Sheath: brown leather
    Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

    WT-LY-BUSB
    €323.77
    Only -50 left
    Only -50 left
    Out of stock
  19. Wander Tactical - Uro Knife - Marble and Black Micarta - craft knife

    Type of production: Artisan

    Blade Production: Italy
    Blade: Steel D2 at 59/60HRC
    Blade Finishing: Marble
    Handle: Micarta
    Blade Length: 147mm.
    Blade thickness: 6mm.
    Total length: 300mm.
    Balance: Advanced
    Weight: 446g.
    Sheath: Kydex, thermoformed
    Package: -
    Notes: Each knife is unique and handcrafted

    WT-UR-MBM
    €315.57
    Only -50 left
    Only -50 left
    Out of stock
  20. Wander Tactical - Smilodon knife - Marble and Brown Micarta - handcrafted knife

    Production Type: Handicraft
    Blade Production: Italy
    Blade: D2 steel at 59/60HRC
    Blade Finishing: Marble
    Handle: Micarta
    Blade Length: 180mm.
    Blade thickness: 6.5mm.
    Total length: 360mm.
    Balance: backward
    Weight: 644g.
    Sheath: Kydex, thermoformed
    Package: -
    Notes: Each knife is unique and handcrafted, there may be slight differences in finishes, colors and materials compared to the product photographed.

    WT-SM-MBM
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  21. Wander Tactical - Tryceratops XL El Carnicero - Raw Black Blood & Black Micarta - handmade knife

    Type of production: Custom
    Country of Production: Italy
    Blade: D2 steel at 59/60HRC
    Blade finish: Black Blood & Raw
    Handle: Micarta
    Blade Length: 155mm.
    Blade thickness: 5.5mm.
    Total length: 255mm.
    Balance: Advanced
    Weight: 475g.
    Sheath: Kydex, thermoformed
    Packaging: -
    Notes: Each knife is unique and handcrafted, there may be slight differences in finishes, colors and materials compared to the product photographed.

    WT-TXL-RBBB
    €323.77
    Out of stock
  22. Wander Tactical - Pterodactyl Hawk - Black Blood & Green Paracord - custom ax

    Type of production: Artisan
    Production Lama: Italy
    Blade: in D2 steel at 59 / 60HRC
    Blade treatment: Black Blood
    Handle: Green Paracord
    Head Size: 90mm (cutting edge) x 208mm
    Thickness: 6.5mm.
    Total length: 370mm.
    Balancing: advanced
    Weight: 943g. (1.080g. With scabbard)
    Sheath: in Kydex, thermoformed
    Packaging: -
    Note:

    WT-PH-GP
    €508.20
    Out of stock
  23. Wander Tactical - Dagger Tool - Limited Edition - craft knife

    Use: Tactics / collection

    Type of production: Artisan
    Production Lama: Italy
    Blade: integral, D2 steel
    Blade treatment: gun cote heart
    Handle: black micarta
    Blade length: 110mm.
    Blade thickness: 5mm.
    Total length: 240mm.
    Balancing: set back
    Weight: 200g.
    Sheath: in Kydex, thermoformed
    Packaging: -
    Notes: WT Limited Exclusive Project - Single Edge - Wander Tactical Certified

    WT-DA-MI
    €262.30
    Rating:
    100%
    5
    Out of stock
  24. Wander Tactical - Lynx - Marble & Brown Micarta - custom knife

    Intended Use: Utility / Collection

    Kind of production: Handmade
    Country of Production: Italy
    Blade: D2 steel at 59/60HRC
    Blade Treatment: Marble
    Handle: Micarta
    Blade length: 105mm.
    Blade thickness: 5mm.
    Total lenght: 235mm.
    Balance: backward
    Weight: 289g.
    Sheath: Kydex
    Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
    Notes: Each knife is unique and handcrafted, there may be slight differences in finishes, colors and materials compared to the product photographed.

    WT-LY-MABR
    €286.89
    Only -50 left
    Only -50 left
    Out of stock
  25. Wander Tactical - Raptor knife - SanMai V-Toku2 & Green Paracord - kydex brown - custom knife

    Japanese steel blends with Italian excellence

    For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an easy regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

    RAPTOR model:

    Use: Tactical / Utility

    Type of production: Artisan
    Production Lama: Italy
    Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
    Blade finish: satin finish
    Handle: Paracord
    Blade length: 75mm.
    Blade thickness: 6.5mm.
    Total length: 178mm.
    Balancing: set back
    Weight: 149g.
    Sheath: in brown kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient Japanese Samurai swords.

    The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

    - Longer life of the cutting edge

    thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

    - Greater resilience
    built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-RAP-VT-B
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  26. Wander Tactical - Tryceratops XL El Carnicero knife - Icebrush & Black Micarta - craft knife

    Type of production: Artisan
    Country of production: Italy
    Blade: in D2 steel at 59 / 60HRC
    Blade Finish: Icebrush
    Handle: Micarta
    Blade length: 155mm.
    Blade thickness: 5.5mm.
    Total length: 255mm.
    Balancing: advanced
    Weight: 442g.
    Sheath: in Kydex, thermoformed
    Packaging: -
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

    WT-TRY-XL-B
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  27. Wander Tactical - Prototype X-020 knife - Green paracord - custom knife

    special prototype made by Wander Tactical in October 2020

    Type of production: Artisan
    Production Lama: Italy
    Blade: stainless steel Nitro-B 58 / 59HRC
    Blade treatment: -
    Handle: Green paracord
    Blade length: 115mm.
    Blade thickness: 5mm.
    Total length: 260mm.
    Balancing: on the branch of gurdia
    Weight: 201g.
    Sheath: in kydex
    Packaging: -
    Notes: unique piece

    WT-X020
    €241.80
    Only -50 left
    Only -50 left
    Out of stock
  28. Wander Tactical - Godfather knife - Marble & Black Micarta - custom knife

    Type of production: Artisan
    Production Lama: Italy
    Blade: in D2 steel at 59 / 60HRC
    Blade treatment: Marble
    Handle: Micarta
    Blade length: 240mm.
    Blade thickness: 6.5mm.
    Total length: 400mm.
    Balancing: set back
    Weight: 715g.
    Sheath: in kydex
    Packaging: -
    Notes: GodFather model

    WT-GF-M
    €0.00
    Only -50 left
    Only -50 left
    Rating:
    80%
    4
    Out of stock
  29. Wander Tactical - Uro - Ice Brush Tiger knife and Green Micarta - craft knife

    Type of production: Artisan

    Production Lama: Italy
    Blade: in D2 steel at 59 / 60HRC
    Blade treatment: Ice Brush Tiger
    Handle: Micarta
    Blade length: 147mm.
    Blade thickness: 6mm.
    Total length: 300mm.
    Balancing: advanced
    Weight: 446g.
    Sheath: in Kydex, thermoformed, with Tek-Lok type attachment
    Packaging: -
    Notes: Each knife is unique and handcrafted

    WT-URO-G
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  30. Wander Tactical - Tryceratops XL El Carnicero - Raw & Brown Micarta - custom knife

    Intended use: Hard Utility / Collection

    Type of production: Handmade
    Country of production: Italy
    Blade: 59 / 60HRC D2 steel
    Blade finish: Raw
    Handle: Micarta
    Blade length: 155mm.
    Blade thickness: 5.5mm.
    Total length: 255mm.
    Balancing: advanced
    Weight: 475g.
    Sheath: in Kydex, thermoformed
    Packaging: -
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

    WT-TXL-RB
    €277.87
    Only -50 left
    Only -50 left
    Out of stock
  31. Wander Tactical - Smilodon Iron Washed and Green Micarta - craft knife

    Thought to be the ultimate survival tool, the Smilodon is remarkably well balanced and offers incredible cutting power on the timber thanks to its bevelled double-concave. In urban areas it can be used as breaching tool, but having regard to its ergonomics can also be employed to use less demanding and complex.

    Type of production: Artisan
    Production Lama: Italy
    Blade: 59 / 60HRC D2 steel
    Blade treatment: GunKote Ice Brush
    Handle: Micarta
    Blade length: 180mm.
    Blade thickness: 6.5mm.
    Total length: 360mm.
    Balancing: set back
    Weight: 644g.
    Sheath: in Kydex, thermoformed
    Packaging: -
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

     

    WT-SMI-GM
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  32. Wander Tactical - Tryceratops knife Clip Point - SanMai V-Toku2 & Black Micarta - custom knife

    Japanese steel blends with Italian excellence

    For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of extrene steel and by the laminated structure.

    Tryceratops model .:

    Use: Tactical / Utility

    Type of production: Artisan
    Production Lama: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 70mm.
    Blade thickness: 6.5mm.
    Total length: 130mm.
    Balancing: set back
    Weight: 188g.
    Sheath: in kydex black
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient Japanese Samurai swords.

    The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

    - Longer tool life

    thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

    - Greater resilience
    built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-TRY-C-VT
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  33. Wander Tactical - Primitive Dagger Tool - Limited Edition - custom knife

    Use: Tactics / collection

    Type of production: Artisan
    Production Lama: Italy
    Blade: integral, D2 steel
    Blade treatment: dual tone
    Handle: black micarta
    Blade length: 110mm.
    Blade thickness: 5mm.
    Total length: 240mm.
    Balancing: set back
    Weight: 200g.
    Sheath: in Kydex, thermoformed
    Packaging: -
    Notes: WT exclusive project limited to 5 pieces - single edge - Wander Tactical certified

    WT-DAG-P
    €262.30
    Out of stock
  34. Wander Tactical - Raptor knife - SanMai V-Toku2 & Green Paracord - custom knife

    Japanese steel blends with Italian excellence

    For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an easy regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of extrene steel and by the laminated structure.

    RAPTOR model:

    Use: Tactical / Utility

    Type of production: Artisan
    Production Lama: Italy
    Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
    Blade finish: satin finish
    Handle: Paracord
    Blade length: 75mm.
    Blade thickness: 6.5mm.
    Total length: 178mm.
    Balancing: set back
    Weight: 149g.
    Sheath: in green kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient Japanese Samurai swords.

    The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

    - Longer tool life

    thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

    - Greater resilience
    built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-RAP-VT
    €0.00
    Only -50 left
    Only -50 left
    Rating:
    93%
    4.7
    Out of stock
  35. Wander Tactical - Scrambler knife - SanMai V-Toku2 & Black Micarta - custom knife

    In collaboration with Wander Tactical we have decided to propose the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese San Mai steel produced by Takefu Steel.
    This time, in the rich catalog of products they offer, we have chosen a particular steel with a carbonaceous edge, but with external stainless steel cheeks. Specifically we used, for the central plate, the carbonaceous V-Toku2 at 62 / 63HRC and the SUS410 for the external lamination in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening and maintenance; at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the laminated structure.
    Use: EDC / Light Utility / All Round

    Type of production: Artisan
    Production Lama: Italy
    Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
    Blade treatment: Satin
    Handle: Micarta
    Blade length: 82mm.
    Blade thickness: 6.8mm.
    Total length: 200mm.
    Balancing: set back
    Weight: 229g.
    Sheath: in Kydex, thermoformed, with belt loop
    Packaging: certificate of authenticity
    Notes: unique and exclusive piece

    As in the ancient Japanese Samurai swords.

    The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

    - Longer tool life

    thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

    - Greater resilience
    built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-SC-VT
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  36. Wander Tactical - Godfather knife Tiger - Icebrush & Black Micarta - custom knife

    Type of production: Artisan
    Production Lama: Italy
    Blade: 59 / 60HRC D2 steel
    Blade treatment: Black Blood
    Handle: Micarta
    Blade length: 225mm.
    Blade thickness: 6.5mm.
    Total length: 385mm.
    Balancing: set back
    Weight: 686g.
    Sheath: in leather
    Packaging: -
    Notes: GodFather model with bowie

    WT-GF-T-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  37. Wander Tactical - Lynx knife Iron Washed & Micarta Desert - custom knife

    Intended use: Utility / Collection

    Type of production: Artisan
    Country of production: Italy
    Blade: in D2 steel at 59 / 60HRC
    Blade treatment: Iron Washed
    Handle: Micarta
    Blade length: 105mm.
    Blade thickness: 5mm.
    Total length: 235mm.
    Balancing: set back
    Weight: 289g.
    Sheath: in leather
    Packaging: unpacked - supplied with certificate of originality and Wander Tactical guarantee
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

    WT-LYNX-BB
    €217.21
    Out of stock
  38. Wander Tactical - Scrambler knife - SanMai V-Toku2 & Desert Micarta - coltello custom

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    SCRAMBLER Model .:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 95mm.
    Blade thickness: 6.5mm.
    Total length: 210mm.
    Balancing: backward
    Weight: 212g.
    Sheath: brown kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-SC-VT-D
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  39. Wander Tactical - Lynx knife - Row & Micarta Desert - custom knife

    Type of production: Artisan
    Lama production: Italy
    Blade: in D2 steel at 59 / 60HRC
    Blade treatment: Row Finish
    Handle: Micarta
    Blade length: 105mm.
    Blade thickness: 5mm.
    Total length: 235mm.
    Balancing: backward
    Weight: 260g.
    Sheath: kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the product photographed.

     

    WT-LY-RF
    €237.70
    Only -50 left
    Only -50 left
    Out of stock
  40. Wander Tactical - Godfather knife - SanMai V-Toku2 & Black Micarta - Unique piece

    In collaboration with Wander Tactical, a unique and exclusive piece to collect, the Godfather model, in a satin blade version with San Mai Japanese steel blade produced by Takefu Steel.
    This time, in the rich catalog of products offered by them, we have chosen a particular steel with a carbon cutting edge, but with external stainless steel cheeks. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the SUS410 for external lamination in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance; at the same time the blade has a remarkable corrosion resistance and an important increase in resilience given by the laminated structure.

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless)
    Blade treatment: satin
    Handle: Micarta
    Blade length: 235mm.
    Blade thickness: 6.5mm.
    Total length: 400mm.
    Balancing: backward
    Weight: 700g.
    Sheath: in black leather

    WT-GF-SM
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  41. Wander Tactical - Tryceratops Compound knife - SanMai V-Toku2 & Brown Micarta - custom knife

    Japanese steel blends with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable corrosion resistance and an important increase in resilience given by the type of foreign steel and the laminated structure.

    Tryceratops Model .:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbonaceous) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 70mm.
    Blade thickness: 6.5mm.
    Total length: 130mm.
    Balancing: backward
    Weight: 184g.
    Sheath: brown kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

     

    WT-TR-VT-C
    €241.80
    Only -50 left
    Only -50 left
    Out of stock
  42. Wander Tactical - Raptor compound knife - SanMai V-Toku2 & OD black Paracord - custom knife

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    RAPTOR model:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Paracord
    Blade length: 75mm.
    Blade thickness: 6.5mm.
    Total length: 178mm.
    Balancing: backward
    Weight: 136g.
    Sheath: black kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-R-VT-C
    €241.80
    Out of stock
  43. Wander Tactical - Godfather knife - Iron Washed & Desert Micarta - Standard Version

    Type of production: Semi-Artisan
    Lama production: Italy
    Blade: in D2 steel at 59 / 60HRC
    Blade treatment: Iron Wash
    Handle: Micarta
    Blade length: 235mm.
    Blade thickness: 6.5mm.
    Total length: 400mm.
    Balancing: backward
    Weight: 748g.
    Sheath: leather
    Notes: semi-artisanal series produced by Wander Tactical. This series differs from the custom line as it is made with standard finishes and materials and is characterized by the presence of the laser engraved Wander Tactical brand on the left side of the blade.
    Send feedback
    History
    Saved
    Community

    WT-GF-B-ST
    €0.00
    Only -50 left
    Only -50 left
    Rating:
    100%
    5
    Out of stock
  44. Wander Tactical - Scrambler knife - SanMai V-Toku2 & Black Micarta - custom

    In collaboration with Wander Tactical we have decided to offer their heavy duty, the Smilodon model, in an exclusive satin blade version that uses the famous Japanese San Mai steel produced by Takefu Steel.

    This time, in the rich catalog of products offered by them, we chose a particular steel with a carbon cutting edge, but with external stainless steel cheeks. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the SUS410 for external lamination in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance; at the same time the blade has a remarkable corrosion resistance and an important increase in resilience given by the laminated structure.

    Use: EDC / Light Utility / All Round

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade treatment: Satin
    Handle: Micarta
    Blade length: 82mm.
    Blade thickness: 6.8mm.
    Total length: 200mm.
    Balancing: backward
    Weight: 215g.
    Sheath: Kydex, thermoformed, with belt loop
    Packaging: certificate of authenticity
    Notes: unique and exclusive piece

    WT-SC-VT2B
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  45. Wander Tactical - Scrambler knife - SanMai V-Toku2 & Brown Micarta - custom knife

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    SCRAMBLER Model .:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 95mm.
    Blade thickness: 6.5mm.
    Total length: 210mm.
    Balancing: backward
    Weight: 212g.
    Sheath: brown kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-TR-VT2
    €225.41
    Out of stock
  46. Wander Tactical - Raptor knife - SanMai V-Toku2 & OD green Paracord - custom knife

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    RAPTOR model:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Paracord
    Blade length: 75mm.
    Blade thickness: 6.5mm.
    Total length: 178mm.
    Balancing: backward
    Weight: 136g.
    Sheath: black kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-RAP-VT2
    €229.51
    Out of stock
  47. Wander Tactical - Lynx knife - SanMai V-Toku2 & Brown Micarta - custom knife

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    Lynx Model:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 107mm.
    Blade thickness: 6.5mm.
    Total length: 237mm.
    Balancing: backward
    Weight: 310g.
    Sheath: brown leather
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-LY-VT2
    €409.84
    Out of stock
  48. Wander Tactical - Scrambler knife - SanMai V-Toku2 & Brown Micarta - custom knife

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    SCRAMBLER Model .:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 95mm.
    Blade thickness: 6.5mm.
    Total length: 210mm.
    Balancing: backward
    Weight: 212g.
    Sheath: brown kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-SC-VT2R
    €278.69
    Out of stock
Set Ascending Direction

Items 97-144 of 300

Page




ecommerce sicuro