Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Tops - CUMA Tak-Ri 3.5 - Tactical Kukri - Green Canvas Micarta - Knife
The CUMA Tak-Ri 3.5 is not your typical kukri. In fact, you have to understand what a Gurkha Kukri is to see the curve of its blade. The kukri (Devnagari/ खुकुरी), originally spelled khukri or khukuri, is a Nepalese curved knife. It is a traditional weapon of the Nepali people and also a weapon of choice/side arm for all Nepalis, including those serving in various armies around the world, but with the CUMA Tak-Ri we have gone further!
Once you have the CUMA Tak-Ri in your hands, you will quickly realize that it is "tough to the core." In fact, the Tak-Ri caused such a stir at the 2011 SHOT Show that Lou Ferrigno (the historic "Incredible Hulk") pre-ordered his directly at the TOPS Knives booth.
Intended Use: Hard Utility / Tactical
Type of Production: Semi-Industrial
Country of Manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Coyote Tan Coatung
Handle: Canvas Micarta
Blade Length: 178mm.
Blade thickness: 4.9mm.
Total length: 343mm.
Weight: 460g.
Scabbard: Nylon, belt-mounted, M.O.L.L.E. compatible.
Packaging: transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by certificate of guarantee and authenticityTPCUMATK35 -
Gerber - Tri-Tip Mini Cleaver - Black Coating - G1694 - knife
Intended use: Sports
Type of production: industrial
Blade: full tang, in 7Cr17MoV stainless steel
Blade finish: Teflon coating
Country of production: China
Handle: aluminum
Blade length: 73mm.
Blade thickness: 4.5mm.
Total length: 148mm.
Balancing: backward
Weight: 170g.
Sheath: ABS with multi-position belt attachment
Note: -G1694 -
Maserin - Artiglio Flipper Knife - OD Green G10 - 420/G10V - Knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Italy
Blade: in D2 steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 100mm.
Blade thickness: 3.2mm.
Closed length: 130mm.
Total length: 223mm.
Thick when closed: 16.4mm.
Weight: 154g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Maserin logos
Notes: Design by Giacomo Toncelli420/G10V -
Maserin - Croz - Micarta Green - 976/MCV - knife
Designed by Ettore Zanon, Croz is a high-quality fixed knife designed to eviscerate ungulates.
It is a simple and lightweight 23cm wide blade, 11 of which 4mm thick blade, N690 steel, 60 HRC, one of the best in the world with a high carbon content and a hardness that allows it to work well without losing the thread. Suture in the part near the handle is intended to facilitate work on the bony parts.
For ergonomics, cheeks are tapped to make it more difficult to slip in the work phases. Maximum safety, guaranteed by generous guard and knurling at the top of the blade, which will make it extremely difficult to lose grip.
Purpose: Hunting / Utility
Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co 60HRC
Blade Treatment: Satin
Handle: Micarta
Blade Length: 110mm.
Blade thickness: 4mm.
Total Length: 230mm.
Balance: Returned to 2.5cm. from the guard branch
Weight: 190g.
Sheath: in Nylon
Packing: Cardboard box with Maserin logos
Notes: Dotted by Ettore Zanon - In the grip there is a handy diamond sharpener attached to the tang.M-976/MCV -
Fabrizio "Silvester" Silvestrelli - Custom CSFK - Black RWL34 - handmade knife
Knife handmade, designed and produced in only 10 copies (5 CPM-S30V steel sandblasted and 5 in RWL-34 steel coated TIN) from the known knifemaker Fabrizio "Silvester" Silvestrelli in collaboration with Collini Cutlery.
Further the CSFK feature is the ability to change at will the manicatura the same between the grips included in the package: Micarta Loveless, G10 or Black Paracord Camouflage. The knife can also be deprived of the grips to be used as a spearhead or to minimize the footprint thickness.
Intended use: tactical / collection
Type of production: made entirely by hand, limited and numbered
Production Country: Italy
Blade: stainless steel full-tang RWL-34 60 / 61HRC
Surface treatment: surface coating TIN "Advance Top" - Multi-layer aluminum and amorphous carbon titanium - Microhardness (HV 0.05): 3500 Vickers
Handle: Micarta Loveless / G10 / Paracord
Blade length: 135mm.
Blade Thickness: 5.5mm.
Overall length: 250mm.
Weight: 225g.
Sheath: Cordura, made in the USA, made by Blackhawk
Notes: knife made by the cutler Fabrizio "Silvester" Silvestrelli in only 5 specimens - certificate of guarantee and authenticity - key to remove the grips9005 -
Tops - Baja 3.0 - Small Outdoor Knife - Green Canvas Micarta - Knife
The Baja 3.0 knife is a synthesis of simple design and excellent execution. The 3.0-inch blade can adequately handle a wide variety of tasks, such as building wooden tools, building a fire and shelter, or felling an animal. The 1/8-inch thick 1095 high-carbon steel provides excellent cutting, penetration and edge-holding qualities. The simple handle design, with its Micarta grooves, provides the user with excellent traction in most circumstances.
Intended Use: Utility
Production Type: Semi-Industrial
Country of Production: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Coyote Tan Coatung
Handle: Canvas Micarta
Blade Length: 76mm.
Blade thickness: 3.5mm.
Total length: 158mm.
Weight: 85g.
Sheath: leather, belt
Packaging: transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by certificate of guarantee and authenticityTPBAJA03 -
Maserin - Reactor knife - Green G10 - Design by Nicolai Lilin - 681 / G10V - knife
Nicolai Lilin, a Russian writer, of Siberian origin, designed Reactor in memory of the operation of the Russian navy special forces in 2010, near the coast of Somalia, when in 22 minutes two operational corps of the marines rescued from the pirates a kidnapped merchantile ship that was carrying oil. On that occasion the militaries could not use firearms to prevent the ship from exploding, so they only used knives. They caught 30 terrorists in 22 minutes. It was a unique operation in the history of international special departments. Reactor is dedicated to all special forces that use white weapons.
Intended use: sports collection
Type of production: industrial
Country of production: Italy
Blade: in D2 steel
Surface treatment: stonewashed
Handle: titanium frame with G10 handle
Blade length: 100mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 243mm.
Closed thickness: 14mm.
Weight: 154g.
Closure: Framelock with removable stainless steel leaf
Clip: removable and reversible, in stainless steel
Sheath: -
Notes: Opening through Carson flipper system - Opening movement on ball bearings - Design by Nicolai LilinMA-681/G10V -
Maserin - B.A.C. Battle Ax Concept 954 / G10 Green - ax
Type of production: Industrial
Country of production: Italy
Blade: Steel D2 59 / 61HRC
Blade treatment: -
Handle: G10 Green
Blade width: 220mm.
Blade thickness: 6mm.
Total length: 340 mm
Weight: 865 gr
Sheath: Kydex with M.O.L.L.E.
Packaging: cardboard box with Maserin logos
Design: Design by Alessandro ZaninMA-954/G10G -
Tops - Wind Runner XL SRE - Snake River Edition - WDR-XL - knife
Intended use: Utility
Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in steel 1095 58 / 60HRC
Blade treatment: Black River Wash
Handle: Tan Canvas Micarta
Blade length: 120mm.
Blade thickness: 4.5mm.
Total length: 248mm.
Balancing: Set back
Weight: 270g.
Sheath: kydex, with vertical belt attachment
Packaging: Transparent plastic bag
Notes: Emergency whistle - Design by Leo EspinozaT-WDR-XL -
Maserin - Tusk - Design by Nicolai Lilin - 988G10V - knife
Intended use:Survival/utlity
Type of production: Industrial
Production Lama: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Stonewashed
Handle: Green G10
Blade length: 150mm.
Blade thickness: 5mm.
Overall length: 226mm.
Balancing: Set back to 1.5cm. the branch of the guard
Weight: 218g. (418g. Sheath)
Sheath: Nylon, MOLLE compatible
Packaging: Cardboard box with logos Maserin
Notes: designed by Nicolai LilinMA-988/G10V -
Wolfpack Survival / Maserin - WP4 Rough Wolf - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present, original, but damaged
* Scabbard: Present, original, like new.
* Manuals, Certificates and Warranties: Yes
* Checked and Certified by our in-house laboratory
WP4 Rough Wolf is a knife researched and designed by chief instructor Paolo Bozzo of Wolfpack Survival Training (survival and survival school). This design was developed through years of direct experience in the field and further improves on the STF-3 model previously made in collaboration with Fox FKMD
Intended Use: Survival/Utlity
Production type: Industrial
Country of Production: Italy
Blade: Stainless Steel N690Co
Blade Finish: Black Stonewashed
Handle: Green G10
Blade Length: 190mm.
Blade thickness: 5.8mm.
Total Length: 320mm.
Balance: Advanced to 3cm. from guard branch
Weight: 566g. (772g. with scabbard)
Sheath: by Radar, in Kydex with multi-position Keyblock attachment
Packaging: cardboard box with Wolfpack Survival logos
Notes: designed by Paolo Bozzo
Dear Friend,
I am Paolo Bozzo and many times ml have found myself in unpleasant, pericolase and difficult situations. Designing a knife and testing it just a few afternoons in the woods is quite different than designing one trying to solve all those survival problems I have encountered in the last 25 years, both In ltaly and abroad. Mud, water, dirt, grease, blood, fatigue, night use, weak hand, limited space, trajectories, physical deficits, heat, cold, transportation, speed and much, much more...these are just some of the tests a good design must pass.
Here are some of the reasons for the WF4 Rough Wolf design.
1. Balance: it is fondamenlal that the center of gravity is shifted forward. beyond the heel, such that it decreases, i.e., saves energy when delivering the blow. one must always have the feeling that the knife falls forward.
2. Beating mass: 65% of the weight of the whole knife is between the first and second 3rd of the blade, giving maximum beating capacity in penetrating.
3. Cutting edge: due to the main core in the shape of an esse. the cutting edge is lower than the fingers of the handle, with the result that in the dynamics of the fendenle and biomechanics of the arm, the force expressed is never attenuated; especially never before the impact of the same on the object to be cut.
4. Blade height: compared to other blades, it has a significantly higher ability to dig holes.
s. Handling: excellent the ability to use the Wp4 for both coarse and precision work, this thanks to the ability to put the hand before the guard, giving absolute mastery of the blade despite its size. This is thanks to the large heel where the index finger can be inserted and the convenient thumb rest. It is also possible to do this while wearing tactical gloves.
6. Back: the inclination is reversed for 2 reasons; 1st to give forward beating mass, 2nd not to stress the wrist during use as chopping, a normal knife arrives at an angle on the object, devastating the point of impact being slight in thickness. This can only be avoided by straining the thumb-side wrist to tilt so that the back of the knife falls perpendicular on the object. The wp4 does not have this problem; it does not stress the wrist because the back of the blade already falls perpendicular to the object to be beaten.
7. Bevel: it is very high, has impressive penetration capacity.
8. Milling cutter: 5 millings placed on the blade plane for holding the knife with two hands when handling animal hides or for special uses during bushcrafting.
9. Grip: it is designed to decrease the possibility of losing the blade and avoid opening of the phalanges during pmlong use or in situations of prolonged physical deficit. Improved, anti-slip grip with internally concave Gauntlets to accommodate a Micro SurvivalKit.
As for the scabbard, I believe it is as important as the blade. I proceeded to design it and recommend its qualities; the main feature I wanted to put in designing it was the multi-positioning of the same: in particular, placing it at will on one's body or equipment facilitates the possibility of use.
This quality is particularly appreciated by military personnel, who are known to have special technical and logistical needs. For this purpose we have used in addition to Kydex the Keyblock closure, as well as the many holes along the perimeter; also safe for airdrop it has the possibility of use and positioning by both Right and Left handed operators.
PAUL BOZZOWP4-CP -
Tops - Tex Creek XL - # TEX-XL - Knife
Intended use: Tactical
Production Type: Semi-Industrial
Blade Production: USA
Blade: Steel 58HRC 1095
Treatment Blade: Black River Wash
Handle: Black Canvas Micarta
Blade length: 155mm.
Blade thickness: 5mm.
Length closed: -
Overall length: 282mm.
Thick when closed: -
Balancing: -
Weight: 270g.
Closure: -
Clip: -
Sheath: Leather
Packing: transparent bag in bubble wrap, warranty certificates
Notes: emergency whistle10964 -
Maserin - Spider 2 Damasco e Radica Verde - Design by Puddu 390/DRV - coltello
Destinazione d'uso: Collezione
Tipo di produzione: industriale
Lama: in acciaio damasco inox ATS34 e 440A a 58HRC
Trattamento Lama: -
Produzione Lama: Italia
Manicatura: acciaio e radica di legno
Lunghezza lama: 77mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 104mm.
Lunghezza totale: 183mm.
Bilanciatura: -
Peso: 94g.
Chiusura: Liner Lock
Clip: -
Fodero: bustina in cuoio nero
Note: design by Puddu2643DRV -
Maserin - Starlight Folder G10 Green - Design by Puddu - 392G10V - knife
Maserin - Starlight Folder G10 Green - Design by Puddu - 392G10V
Intended use: sporty / gentleman
Type of production: industrial
Production Blade: Italy
Blade: AUS-8 stainless steel
Treatment Blade: satin
Handle material: G10 Green
Blade length: 78mm.
Blade Thickness: 2.5mm.
Closed Length: 100mm.
Total length: 175mm.
Thick when closed: 10mm.
Balance: -
Weight: 74g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: Design by Puddu4311-G10-V -
Tops - ATC - coltello
Destinazione d'uso: Tattico/Militare
Tipo di produzione: semi industriale
Lama: Full-tang in acciaio al carbonio 1095
Produzione Lama USA
Manicatura: Micarta grigia con spaziatori bianchi
Lunghezza lama: 130mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 265mm.
Bilanciatura: arretrata a 2cm dal ramo di guardia
Peso: 284g.
Chiusura: -
Clip: -
Fodero: in Cordura
Note: -5732 -
Tops - Cheetah Skeleton Black coltello
Destinazione d'uso: Backup / Light Utility
Tipo di produzione: Semi-Industriale
Produzione Lama: USA
Lama: In acciaio al carbonio 1095 58HRC
Trattamento Lama: BTC - Black Traction Coating
Manicatura: Paracord
Lunghezza lama: 70mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 160mm.
Spessore da chiuso: -
Bilanciatura: arretrata, ad 1cm. dal ramo di guardia
Peso: 90g.
Chiusura: -
Clip: sul fodero
Fodero: in cuoio
Confezione: busta con certificati di garanzia e numeri di serie
Note: -5799 -
Tops - Hoffman Harpoon - Plain Black coltello
Destinazione d'uso: militare
Tipo di produzione: semi industriale
Lama: full tang in acciaio al carbonio 1095
Produzione Lama: USA
Manicatura: Paracord
Lunghezza lama: 62mm.
Spessore della lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 204mm.
Bilanciatura: -
Peso: 74g.
Chiusura: -
Clip: -
Fodero: Cordura
Note: affilatore ceramico Lansky incluso - Kit per accendere fuochi incluso5751 -
Tops - Mohawk Hunter - Plain Black - coltello
Destinazione d'uso: militare
Tipo di produzione: semi industriale
Lama: full tang in acciaio al carbonio 1095
Produzione Lama: USA
Manicatura: Micarta
Lunghezza lama: 125mm.
Spessore della lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 250mm.
Bilanciatura: avanzata - 2.5cm. dal ramo di guardia
Peso: 220g.
Chiusura: -
Clip: -
Fodero: Kydex
Note: -5741 -
TOPS - Safety Security Survival Knife - SSSK-01 coltello
Destinazione d'uso: Survival
Tipo di produzione: Semi-Industriale
Produzione Lama: USA
Lama: In acciaio inox 154CM 60HRC con tempra di Paul Bos
Trattamento Lama: -
Manicatura: Paracord
Lunghezza lama: 60mm.
Spessore lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 130mm.
Spessore da chiuso: -
Bilanciatura: Arretrata, 1cm
Peso: 48g.
Chiusura: -
Clip: -
Fodero: in Micarta, con agganci magnetici
Confezione: -
Note: comprende un acciarino, uno specchio per segnalazioni, un affilatore al diamante ed un fischietto di emergenza5798 -
Tops - UTE#01 - Utility Tool Edge - coltello
Destinazione d'uso: Backup/Tattico
Tipo di produzione: semi industriale
Lama: in acciaio 1095 58HRC
Manicatura: Black Linen Micarta
Lunghezza lama: 70mm.
Spessore della lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 155mm.
Bilanciatura: Arretrata a 2cm. dal ramo di guardia
Peso: 108g.
Chiusura: -
Clip: -
Fodero: in Kydex con clip multiposizione
Note: made in U.S.A.5714