Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Knife from a private collection

* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, limited edition to 150 pieces
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:
* Sheath:
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory

Intended use: Collection / Survival

Type of production: industrial
Blade: CPM D2 steel
Country of production: Germany
Handle: in G10
Blade length: 140mm.
Blade thickness: 4.8mm.
Total length: 310mm.
Weight: 520g.
Sheath: -
Notes: patented "knee" closure system made in Italy

The original purpose of the Silent Hero knife was to provide a medium-sized tool for use by an interdiction unit specializing in fighting rhino poachers in Africa. It is an excellent design that has served many people on different continents. Over time, Anton (the designer) realized that he did not always need such a large knife strapped to his hip.

This is where the Silent Hero 4 was born. The handle and blade shape of the full-sized knife were perfect for a variety of tasks. By reducing them, you get a knife that is much easier to carry as an EDC, but still long enough to handle most cutting tasks. The appearance of this smaller version is basically the same, but there are some differences. The blade is a bit thinner, the finish is Sniper Gray Cerakote (instead of Black River Wash) and it comes with a Kydex sheath instead of leather. So if you are looking for a blade to match your Silent Hero or simply prefer a blade length of about 4" instead of 6", the new Silent Hero 4 will be an excellent addition to your collection!

Intended Use: Utility

Type of production: Semi-Industrial
Country of manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade treatment: Cerakote Sniper Gray
Handle: Canvas Micarta
Blade length: 108mm.
Blade thickness: 3.4mm.
Total length: 225mm.
Balance: on the guard branch
Weight: 170g.
Sheath: kydex
Packaging: transparent plastic bag
Notes: Emergency whistle - Design by Anton Du Plessis

The Mission Team 21 is a no-nonsense tactical knife that can also easily carry out many activities in the field. The handle has been designed to remain in the operator's hand even in difficult situations thanks to the finger grooves, finger guard and jimping. If necessary, the knife can also be used in survival situations.

Created with the guidance of Bill Hill (Command Master Chief-Seal Team 3 retired with over 30 years of real-time experience), this design has produced a great field tool for any theater. Very nice aesthetically, feels good in the hand and always performs at its best.

Intended use: Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in 1095 steel 58 / 60HRC
Blade treatment: Black River Wash
Handle: G10 Black
Blade length: 150 mm.
Blade thickness: 6mm.
Total length: 300 mm.
Balancing: on the guard branch
Weight: 487g.
Sheath: in cordura
Packaging: Transparent plastic bag
Notes: Emergency whistle

Intended Use: Bushcraft / Utility

Production type: Semi-Industrial
Country of Production: USA
Blade: Full tang in 1095 58/60HRC steel
Blade Finish: Black Traction Coating
Handle: Micarta
Blade Length: 172mm.
Blade thickness: 6.3mm.
Total length: 305mm.
Weight: 430g.
Sheath: Nylon, for thighs, with frontal pocket.
Package: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity.

Intended Use: Bushcraft / Utility

Production type: Semi-Industrial
Country of Production: USA
Blade: Full tang in 1095 58/60HRC steel
Blade Finish: Black Traction Coating
Handle: Micarta
Blade Length: 146mm.
Blade thickness: 6.3mm.
Total length: 286mm.
Weight: 510g.
Sheath: Nylon, thigh length, with frontal pocket.
Package: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity.

Intended Use: Tactical / Military

Production type: Semi-Industrial
Country of Production: USA
Blade: Full tang in 1095 58/60HRC steel
Blade Finish: Tactical Stone Coating
Handle: G-10
Blade Length: 89mm.
Blade thickness: 5mm.
Total length: 219mm.
Weight: 192g.
Sheath: Kydex sheath with metal belt clip rotatable 360° and tinder box included.
Package: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity.

The Fieldcraft Knife was designed by The Brothers of Bushcraft, a group of nature activity enthusiasts. From tracking, to building shelters, the Brothers of Bushcraft are committed to training and educating people of all ages and genders to the passion of bushcraft.

The Fieldcraft Knife is the result of their knowledge and experience gained in the field; through experiences in the vast and humid rainforests, the arid and scorpion-strewn deserts and the freezing northern lands that span the Americas.

Intended use: Bushcraft / Utility

Type of production: Semi-Industrial
Production Lama: USA
Blade: full tang in 1095 steel 58 / 60HRC
Blade treatment: Black Traction Coating
Handle: G10
Blade length: 120mm.
Blade thickness: 4.5mm.
Total length: 250mm.
Thick when closed: -
Weight: 278g.
Sheath: in Kydex with 360 ° rotatable metal belt clip and flintlock included
Packaging: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity

Intended use: Bushcraft / Utility

Type of production: Semi-Industrial
Production Lama: USA
Blade: full tang in 1095 steel 58 / 60HRC
Blade treatment: Black Traction Coating
Handle: Micarta
Blade length: 100mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Thick when closed: -
Weight: 191g.
Sheath: in Kydex with 360 ° rotatable metal belt clip
Packaging: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity

Knife withdrawn from a private collection - In like new condition, original sharpening, without original box - Checked and certified by our in-house Coltelleria Collini laboratory.

After two years of collaboration with expert military instructor Frank Heyl, Gerber is delighted to bring to market what they themselves define as the strongest military / survival knife ever built. quick to change the handle, but also so robust that it can pierce an aircraft fuselage but also simply be used as a hammer, glass breaker or throwing knife.

Intended use: Military

Type of production: industrial
Blade: 12C27 stainless steel
Blade treatment: TiNi - Titanium Nitriding
Production Lama: USA
Handle: non-slip in fiberglass and nylon
Blade length: 125mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 275mm.
Balancing: 3cm back.
Weight: 330g.
Closure: -
Clip: -
Sheath: Nylon and fire retardant anti-slip polymers, M.O.L.L.E. system, ultra-flat to limit the overall dimensions, integrated sharpener
Notes: Skullcrasher / Hammer in stainless steel and slots for wrist strap or to be used with a rod to create a spear.

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 7Cr17Mov stainless steel
Blade treatment: Satin finish
Handle: Aluminum
Blade length: 25.4mm.
Blade thickness: 3.8mm.
Length closed: 50.8mm.
Total length: 76.2mm.
Weight: 66g.
Closing: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Gerber logos
Notes: Opening via Carson Flipper system

Intended use: Tactical / Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in 1075 - 56 / 58HRC carbon steel
Blade treatment: Black Traction Coating
Handle: G10 Black
Blade length: 184mm.
Blade thickness: 7.8mm.
Total length: 318mm.
Balancing: on the guard branch
Weight: 695g.
Sheath: in kydex
Packaging: Transparent plastic bag
Notes: Design by Leo Espinoza

Intended use: sports

Type of production: Industrial
Country of production: China
Blade: Stainless steel 7Cr17Mov
Blade treatment: Satin finish
Handle: Aluminum
Blade length: 74mm.
Blade thickness: 2.7mm.
Closed length: 98mm.
Total length: 169mm.
Weight: 115g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Gerber logos
Note: -

Important notice: due to Gerber's technical and packaging choices (painted aluminum instead of anodized and poorly protected knife in its packaging), we point out that these articles, although they are new from the factory and come from the manufacturer, already present small imperfections and abrasions that undermine aesthetic perfection. We therefore recommend the purchase only to concrete users and we advise against buying them instead from collectors.

Intended use: sports

Type of production: Industrial
Country of production: China
Blade: Stainless steel 7Cr17Mov
Blade treatment: Stonewashed
Handle: Stainless Steel and Aluminum
Blade length: 97mm.
Blade thickness: 3.8mm.
Length closed: 119mm.
Total length: 216mm.
Weight: 150g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with Gerber logos
Note: -

Important notice: due to the technical and packaging choices of Gerber (painted aluminum instead of anodized and knife fixed with a plastic band in the cardboard box that physically "scrapes" the paint of the handle), we point out that these articles, although factory new and from the manufacturer, they already present small imperfections and abrasions that undermine their aesthetic perfection. We therefore recommend the purchase only to concrete users and we advise against buying them instead from collectors.

Intended use: Survival / Utility / Hiking

Type of production: Industrial
Lama production: Taiwan
Blade: full tang, in 9Cr19MoV stainless steel
Blade treatment: satin finish
Handle: rubber
Blade length: 135mm.
Blade thickness: 4.2mm.
Length closed: -
Total length: 265mm.
Thick when closed: -
Balancing: -
Weight: 206g.
Closing: -
Clip: -
Sheath: in Nylon
Packaging:
Note:

Intended use: Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in steel 1095 58 / 60HRC
Blade treatment: Black River Wash
Handle: G10 Black
Blade length: 184 mm.
Blade thickness: 7.8mm.
Total length: 318 mm.
Balancing: on the guard branch
Weight: 695g.
Sheath: in kydex
Packaging: Transparent plastic bag
Notes: Emergency whistle - Design by Leo Espinoza

The Operator 7 is huge! TOPS Knives went well with heavy steel and handles to make a hefty, well-balanced knife. It also has those classic American fighting knife aesthetics that make it look as good as it will perform.

Made out of 5/16 "thick 1075, the differentially heat-treated blade with a very strong thorn. The entire handle is also over 1 "thick once assembled to fill out the user's hand much like an ax or hatchet handle would.

Because it is a tool, it's got to be comfortable. It's made for the men that do not back down. This knife will find its place with door kickers, survivalists, and weekend warriors alike. The rounded handles and hand guards make it a joy to use and the finger choil allows the user great precision for finer cuts. The 6.5 "of cutting edge will help you get the work done." The included Kydex sheath with dangler attachment makes it easy to carry into whatever territory you find yourself.

Intended use: Hard Utility / Survival

Type of production: industrial seeds
Country of production: USA
Blade: CPM-154CM stainless steel 58 / 60HRC with cryogenic treatment
Blade finish: tumbled
Handle: micarta
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 273mm.
Balancing: coinciding with the lower guard branch
Weight: 931g.
Sheath: in thermoformed kydex with 360 ° rotating steel clips
Notes: Design by Tom Brown - used in the film The Hunted with Benicio Del Toro

Intended use: Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in steel 1095 58 / 60HRC
Blade treatment: Black River Wash
Handle: Tan Canvas Micarta
Blade length: 240mm.
Blade thickness: 5mm.
Total length: 295mm.
Balancing: on the guard branch
Weight: 315g.
Sheath: in black leather
Packaging: Transparent plastic bag
Notes: Emergency whistle - Design by Anton Du Plessis

The Silent Hero was designed by Anton Du Plessis, who is the Chief of Operations for the Specialized Interdiction Unit of the Silent Heroes Foundation. His task is to combat the poaching crisis in South Africa. This knife has to be durable, versatile, and able to fill Anton's needs in the field, which affected the design of the blade and the handle. It will definitely hold up to hard use. And with a weight of only 12 oz, you'll be able to use the knife without getting fatigued too quickly.

There is a lanyard hole in the handle along with another in the finger guard. This is meant to allow the user to add a safety cord in order to improve the grip on the handle, which already allows for a solid grip. The finger-guard hole can also be used to assist in lashing to a spear when the situation warrants it.

There is a finger choil up into the blade to give you the ability to choke up and execute precise, fine cuts. The drop point design makes this knife great for slicing and gives the tip extra strength. So this knife will be a great knife for bushcraft, survival, and tactical purposes.

The black leather sheath is durable and looks great paired with this knife. The Silent Hero is held in place with a single snap loop that curls around the finger guard.

The Silent Hero is a great design and a very versatile blade. It is large enough that it can be used to chop, but is also still small enough to complete most of the tasks you can do or want to do with a smaller knife.

TOPS Knives is a proud supporter and Corporate Sponsor of the Silent Heroes Foundation.

Intended use: Sports

Type of production: Semi-Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade treatment: Stonewashed
Handle: Black G10 with Cryptic design Cyber
Blade length: 82mm.
Blade thickness: 3.5mm.
Closed Length: 146mm.
Overall length: 194mm.
Weight: 76.5g.
Closing: Friction / Slip Joint
Sheath: leather with belt loop
Packaging: transparent plastic bag with warranty and authenticity certificate
Notes: Design by Leo Espinoza

Use: Bushcraft / Utilities

Production Type: Semi-Industrial
Production Lama USA
Blade: Full tang 1095 steel 58 / 60HRC
Treatment Blade: Black Traction Coating
Handle: Green G10
Blade length: 120mm.
Blade thickness: 4.5mm.
Length closed: -
Overall length: 250mm.
Thickness when folded: -
Balancing: -
Weight: 278g.
Closed: -
Clip: -
Sheath: Kydex with metal belt clip rotates 360 ° and flint included
Packaging: transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of authenticity and warranty

Intended use: Tactical / Military

Blade: stainless steel 420HC
Production Lama USA
Handle: Zytel
Blade length: 115mm.
Blade Thickness: 3.5mm.
Closed Length: 142mm.
Overall length: 255mm.
Balancing: -
Weight: 172g.
Lock: Liner Lock
Clip: -
Sheath: Cordura
Notes: Based on the dagger designed by William Fairbairn and Rex Applegate

Intended use: Tactical / Military

Blade: 420HC stainless steel
Lama production: USA
Handle: Zytel
Blade length: 115mm.
Blade thickness: 3.5mm.
Length closed: 142mm.
Total length: 255mm.
Balancing: -
Weight: 172g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -

Tops Knives - C.A.T. (Covert Anti-Terrorism) Spearpoint Skeletonized

Type of production: semi industrial
Blade: 1095 58HRC steel
Handle: -
Blade length: 83mm.
Total length: 180mm.
Blade thickness: 4mm.
Closed Length: -
Weight: 120g.
Closure: -
Sheath: Kydex
Notes: full tang

Intended use: Hard Utility

Type of production: Semi-Industrial
Lama production: USA
Blade: 1095 carbon steel
Blade Treatment: Heat Treated 2XBlack Traction Coating
Handle: Micarta
Blade length: 141mm.
Blade thickness: 6.5mm.
Total length: 275mm.
Balancing: on the guard branch
Weight: 438g.
Sheath: combat ballistic nylon
Packaging: envelope with guarantee certificates

PRY-PROBE-PUNCH TOOL
Dimensions: 175x35mm.
Max thickness: 12mm.

FOLDING SAW
Blade length: 80mm.
Open length: 195mm.

DOUBLE SCREWDRIVER
Dimensions: 105x45mm.