Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

* Type: Previously purchased and used. 
* Condition: Very good condition, with a few small marks on blade and handle.
* Commercially available: Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small, unnoticeable scratches on the tip of the blade.
* Marks on handle: A small mark near the clip housing.
* Packaging: Yes
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Production Type: Industrial
Country of Production: China (by Reate Knives)
Blade: Elmax stainless steel
Blade finish: satin finish
Handle: green cavnas micarta with brass spacer
Blade length: 87mm.
Blade thickness: 3.5mm.
Length closed: 114mm
Total length: 203mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: cardboard box with Giant Mouse logos
Notes: discontinued knife, winner of the "2023 BEST EDC CHAMPION" award by Carryology

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratory

Intended use: Regional

Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife from the 1990s, previously purchased.
* Condition: In very good condition
* Commercially available: discontinued
* Sharpening: Factory sharpened
* Marks on blade: Small marks given by time.
* Marks on handle: None
* Box: -
* Scabbard: Present, but presumably not original although fully compatible.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8A
Blade Finish: Satin finish
Handle: Kraton
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 263mm.
Balance: advanced
Weight: 225g.
Scabbard: brown leather, belt-mounted, presumably not original but fully compatible
Packaging: -
Notes: previously purchased knife, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: some minor scuffs and hairlines on the right side
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Collection

Production type: MidTech
Country of manufacture: USA
Blade: stainless rolled damascus with wave design, 45-ply and ZDP-189 cutting edge
Blade finish: -
Handle: titanium with blue anodized and topaz set
Blade length: 79mm.
Blade thickness: 2.3mm.
Length closed: 100mm.
Total length: 180mm.
Weight: 57g.
Closure: Button Lock with embedded topaz
Sheath: leather, with stainless steel clip
Packaging: cardboard box with William Henry logos and warranty certificate
Notes: previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased 
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in excellent condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.

Designed specifically for the seven Mercury Program astronauts, the Model 17 accompanied these pioneers on the United States' first manned space flights. Astronaut Gordon Cooper contributed to the final design of this knife, making it not only a survival tool, but also a piece of history. Two examples of this knife, rich in historical value, are currently on display at the Smithsonian Institution.

Intended use: utility/military

Type of production: handcrafted
Country of manufacture: USA
Blade: 440B stainless steel
Blade finish: satin-finished
Handle: micarta, brass and duralumin
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 256mm.
Balance: on the guard branch
Weight: 252g.
Sheath: Black Leather
Notes: previously purchased knife, withdrawn from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratory

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratory

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel N690Co hardened to 59/60 HRC
Blade finish: satin finish
Handle: Snakewood - 416 stainless steel guard and pommel
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 240mm.
Weight: 185g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from a private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1990 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade; artisan passed away in 2013
* Sharpening: Factory sharpening, can be improved.
* Marks on blade: A few small oxidation marks on handle.
* Marks on handle: A few small marks on steel bolsters due to time.
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks from time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: USA
Blade: full tang, handcrafted carbon damascus steel
Handle: stainless steel heads and giraffe bone handles
Blade length: 104mm
Blade thickness: 3mm.
Total length: 196mm.
Weight: 94g.
Sheath: Leather, for belt or boot, with steel clip for attachment
Packaging: -
Notes: rare handcrafted knife made in 1990 by well-known American knife maker Tommy Lee

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 03/1990 model, in like-new condition
* Commercially available: Unique knife, entirely custom made and hand-engraved
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house workshop

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: Germany
Blade: stainless steel CPM-T440V at 60HRC
Blade finish: mirror polish
Handle: integral from solid, fully hand-engraved, with fossil ivory grips and red micarta spacers
Blade length: 93mm
Blade thickness: 4mm.
Total length: 203mm.
Weight: 99g.
Sheath: Leather
Packaging: -
Notes: rare handcrafted knife made in March 1990 by well-known German knifemaker Peter Herbs, a member of the German Knifemakers' Guild and a member of the very prestigious American Knifemakers' Guild.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 12/1990 model, overall in good condition, with a few small marks from time
* Commercially available: Limited edition, numbered model, made entirely by hand; craftsman passed away in 2009
* Sharpening: Re-sharpened, a few small marks on blade due to sharpening
* Marks on blade: A few small marks
* Marks on handle: A few hairlines on the bolsters and a small dent on the left micarta handle.
* Box: -
* Scabbard: Suede leather case.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house laboratory

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: USA
Blade: stainless steel ATS34
Blade finish: satin finish
Handle: Stainless steel and Micarta
Blade length: 83mm
Blade thickness: 2.5mm.
Length closed: 108mm.
Total length: 189mm.
Thickness when closed: 8mm.
Weight: 99g.
Closure: Back Lock
Clip: -
Sheath: Suede leather pouch
Packaging: -
Notes: rare handcrafted knife made in December 1990 by noted U.S. knife maker Frank Centofante who passed away in 2009, serial number #049

Type: Previously Purchased
Condition: in excellent condition
Available in the market, currently in production
Sharpening: Factory standard
Blade marks: None
Handle marks: None
Box: Present
Sheath: Not applicable
Manuals, Certificates, and Warranties: ER
Checked and Certified by our internal laboratory
Intended use: Tactical/Emergency

Type of production: Industrial
Blade Production: Italy
Blade: N690Co stainless steel, 58HRC
Blade Treatment: Testudo
Handle: Anticorodal
Blade length: 95mm
Blade thickness: 4mm
Closed length: 134mm
Total length: 225mm
Closed thickness: 24mm
Balance: Not applicable
Weight: 162g
Closure: Liner Lock
Clip: Stainless Steel
Sheath: Not applicable
Packaging: black cardboard box with Extrema Ratio logos
Notes: seat belt cutter, glass breaker, screwdriver for optics

Type: Previously purchased and used
Condition: In excellent condition
Availability: Available for purchase
Sharpening: Resharpened
Blade marks: NO
Handle marks: small marks on the clip
Box: Original and present, made of cardboard
Sheath: Not included
Manuals, Certificates, and Warranties: Included
Inspected and Certified by our internal laboratory
Usage: Sports/Collection

Type of production: Industrial
Country of production: Italy
Blade: Bohler M390 steel 60/61HRC
Blade finish: Bead blasted and matt
Handle: Carbon Fiber and Titanium
Blade length: 74mm
Blade thickness: 3.5mm
Total length: 175mm
Weight: 62g
Lock: Titanium Frame Lock with steel stopper
Clip: 6Al4V Titanium
Packaging: Cardboard box with LionSteel logos
Notes: IKBS ball-bearing opening with Carson flipper system

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased and Used
Conditions: In excellent conditions
Available in the market: Out of production since 2010
Sharpening: Factory
Marks on blade: NO
Marks on handle: NO
Box: Present
Sheath: -
Manuals, Certificates, and Warranties: No
Checked and Certified by our internal laboratory
Intended use: Sport / Collection

Type of production: Industrial
Blade Production: USA
Blade: In CPM-S30V stainless steel
Blade finish: Satin
Handle: G10
Blade Length: 87mm.
Blade Thickness: 3.5mm.
Closed Length: 122mm.
Total Length: 210mm.
Weight: 110g.
Closure: Compression Lock
Clip: Painted stainless steel
Packaging: Cardboard box with Spyderco logos
Notes:

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Condition: in excellent condition
Available in commerce: NO
Sharpening: Original
Marks on blade: YES - small marks
Marks on handle: NO
Packaging: YES, original box
Checked and Certified by our internal laboratory
Intended use: Tactical/Military

Type of production: Industrial
Country of production: USA
Blade: In stainless steel 154CM
Blade finish: Tungsten DLC Coating
Handle: G10 with stainless steel liners
Blade length: 101mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 222mm.
Thickness when closed: 21mm.
Weight: 225g.
Closure: Liner Lock
Clip: Removable, reversible and multi-position, in stainless steel
Packaging: -
Notes: Design by Ken Onion - Opening system through Carson Flipper system - Knife out of production, withdrawn from private collection, like new, without box

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight: a few small scratches and abrasions on corners and clip; small oxidation marks on hardware
* Box: Present and original (full set).
* Scabbard: -
* Manuals, Certificates and Warranties: Present (full set)
* Checked and Certified by our in-house laboratory



Tactical knife/EDC produced in the late 1990s and designed by martial arts expert James Keating,

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.

Intended Use: Tactical/Collection
Production Type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM 
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 75mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 13mm
Weight: 90g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Master of Defense logos

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On order
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Packaging: Zip pouch, original
* Scabbard: Leather, pocket size, original
* Manuals, Certificates and Warranties: Certificate of guarantee and authenticity present.
* Checked and Certified by our in-house laboratory

Intended use: sports/collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel M390 60/61HRC
Blade finish: satin finish
Handle: titanium
Blade length: 176mm.
Blade thickness: 2.5mm.
Length closed: 99mm.
Total length: 175mm.
Weight: 64g.
Closure: Frame Lock
Clip: removable, titanium
Scabbard: Leather pouch
Packaging: Zip pouch and certificate of authenticity and warranty 
Notes: Designed and made entirely by hand in Italy by Franco "Frank" Bonassi, Decemnre 2019 example with serial number T27 - Previously purchased, from private collection

CHEF'S TONGUE

Stainless steel chef's tongs, useful for checking food cooking and making it easier to grip.

Specifications: Dishwasher safe Length: 15 cm.

Knife from private collection - Vintage model (presumably early 90's) from Maison Coutellerie Thiers - In very good condition, never used for cutting, still shows some small signs of wear due to past time - Supplied with original leather sheath, with some small signs of wear - Checked and certified by our in-house laboratory.

Intended Use: Collection/Sportsman

Type of manufacture: Industrial
Country of Production: France
Blade: Stainless steel Z70CD15 (440A)
Blade finish: satin-finished
Handle: stainless steel and dark green stamina wood
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 175mm.
Weight: 95g.
Closure: Back Lock
Clip: not present
Sheath: leather, with belt loop
Notes: knife from private collection in excellent condition

H.E.F.T. Hostile Environment Field Tool
Knife born from the collaboration between the American DPX Gear and the Italian company Lion Steel.

Knife withdrawn from a private collection - Globally in excellent condition, complete with original box and certificates - Checked, certified by our in-house Coltelleria Collini laboratory.

Intended use: Sports / Tactical

Type of production: Semi-Industrial
Production Lama: Italy
Blade: Sleipner Steel 60HRC
Blade treatment: black satin TiCN PVD coating
Handle: G10 Black
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: central
Weight: 200g.
Designed: by Tommaso Rumici & Robert Young Pelton
Sheath: cordura
Packaging: cardboard box with DPX GEAR logos

Scissors Thinning mod. Style by Salon Professional 5.5 "

Material: Stainless steel 420 satined
Blade: a smooth and notched
Blade Length: 5.5 cm
Overall Length: 5.5 Inches - 14,5 cm
Sharpening: Plain
Finger rest: Removable
Weight: 46 gr.

Each scissor is controlled by our laboratory in order to ensure a perfect cut

Scissors Thinning mod. Style by Salon Professional 5.5 "

Material: Stainless steel 420 satined
Blade: a smooth and notched
Blade Length: 5.5 cm
Overall Length: 5.5 Inches - 14,5 cm
Sharpening: Plain
Finger rest: Removable
Weight: 46 gr.

Each scissor is controlled by our laboratory in order to ensure a perfect cut

Coltelleria Collini - Chef's food tongs - Beak - 15 cm

Chef's food tongs with beak - 15 cm.

Stainless steel chef's tongs, useful for checking the cooking of food and making it easier to grip. Its curved shape makes it possible to move and check the food more precisely, especially for the plating and decorating of sweet or savoury dishes.

Ideal especially for preparing sushi dishes.

Specifications:

Dishwasher safe

Length: 15cm.

Coltelleria Collini - Animal shearing scissors with straight perforated blade - 8''

Scissors specially designed for shearing animals. The scissors of the Style series are made of high carbon stainless steel and feature perforated blades to significantly reduce hand strain during cutting, thus ensuring an easier, more precise and long-lasting cutting performance.

Material: 420 stainless steel 

Straight blade: Perforated

Blade length: 9 cm

Total Length: 8 Inches - 19 cm (with finger rest 21 cm)

Sharpening: Flat Finger rest: Fixed

Each scissor is checked by our internal laboratory in order to guarantee a perfect cut.

Professional gouge for carving and removing calluses; completely made of stainless steel

Pre-sale inspection and sharpening service carried out in our workshops

Classic series nail clippers are manufactured from high cobalt stainless steel.

Professional, stylish, sturdy, practical nail clippers suitable for ingrown nails

- Stainless steel
- Excellent quality
- Single spring
- Total size: 10 cm.

To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening laboratory, checks and overhauls every tool sold.

Classic series nail clippers are manufactured from high cobalt stainless steel.

Professional, stylish, sturdy, practical nail clippers suitable for ingrown nails

- Stainless steel
- Excellent quality
- Single spring
- Total size: 12 cm.

To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening laboratory, checks and overhauls every tool sold.

Classic series nail clippers are made of high cobalt stainless steel.

Professional, stylish, sturdy, practical nail clippers suitable for ingrown nails

- Stainless steel
- Excellent quality
- Single spring
- Total size: 13 cm.

To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening workshop, checks and overhauls every tool sold.

Coltelleria Collini - Chef's tongs for food - Sushi - 21cm

CHEF'S TONGS

Stainless steel chef's tongs, useful for checking the cooking of food and making it easier to grip. Its curved shape makes it possible to move and check the food more precisely, especially for the plating and decoration of sweet or savoury dishes.

Ideal especially for preparing sushi dishes.

Technical features:

Dishwasher safe

Length: 21cm.

Pliers Chef Food 18 cm

FORCEPS CHEF
Forceps chef stainless steel, useful for checking cooking food and for easier handling.
Specifications Suitable for dishwasher
Length: 18 cm.

The microfibre cloth for cleaning blades, offered by Coltelleria Collini, represents an essential accessory for cutlery enthusiasts and for those who want to keep their blades always in perfect condition. This cloth, measuring 15x15 cm, has been designed to offer effective cleaning of the blades, easily removing fingerprints, grease and dirt without leaving streaks or scratches.

Personalized with the Coltelleria Collini logo, this cloth is not only a practical maintenance tool, but also becomes a symbol of belonging to our community of enthusiasts and customers.

Suitable for both daily and professional use, the microfibre cloth for cleaning blades is the accessory that cannot be missing from every knife lover's collection.

Classic series nail clippers are made of high cobalt stainless steel.

Professional, stylish, sturdy, practical nail clippers suitable for ingrown nails

- Stainless steel
- Excellent quality
- Double spring
- Total size: 14 cm.

To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening laboratory, checks and overhauls every tool sold.

Black Hat - Gadgets

Comfortable 100% cotton baseball cap with embroidery Collini Cutlery.

The baseball cap is useful in all situations, with a modern pre-curved visor, a comfortable shelter from the sun, and the light summer rain, very breathable and durable cotton.

One size fits all adjustable through system closing on the back.

Style series nail clippers are manufactured from high-carbon stainless steel.

Professional, stylish, sturdy, practical nail clippers suitable for hand manicures

- Stainless steel
- Excellent quality
- Single spring
- Total size: 12 cm.

To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening workshop, checks and overhauls every tool sold.

Style series cutters are manufactured from high-carbon stainless steel.

Professional, stylish and practical cutters suitable for hand manicures

- Stainless steel at
- Excellent quality
- Single spring
- Cutting size: 5 mm or 7 mm

To ensure a perfect cut, Coltelleria Collini with its in-house sharpening workshop checks and overhauls every tool sold.

Style Series Hairdressing Scissors

Style series scissors are manufactured from high-carbon stainless steel, featuring semi-convex blades and a concave inner surface to significantly reduce hand strain during cutting, thus ensuring an easier, more precise and longer-lasting cutting performance.

They feature a micrometric tension adjustment mechanism and an unscrewable, ergonomically machined finger rest.

Material: polished 420 stainless steel
Blade: smooth
Blade Length: 5.5 inches
Total Length: 5.5 inches - 14.5 cm
Sharpening: Flat
Finger Rest: Removable
Weight: 46 gr.

Each scissor is checked by our in-house laboratory in order to ensure a perfect cut

Classic series hairdressing scissors

Material: satin-finish 420 stainless steel
Blade: smooth
Blade Length: 5 cm
Total Length: 5.5 Inches - 14 cm
Sharpening: Flat
Finger Rest: Removable
Weight: 44 gr.

Each scissor is checked by our in-house laboratory in order to ensure a perfect cut

Stainless Steel Tweezers for fishbones

FORCEPS CHEF

Tweezers for fishbones in stainless steel. Perfect for take off, with ease and precision, the bones.

Specifications Suitable for dishwasher
Length: 13 cm.

Professional gouge for carving and removing calluses; completely made of stainless steel

Pre-sale inspection and sharpening service performed in our workshops

Professional gouge for carving and removing calluses; completely made of stainless steel

Pre-sale inspection and sharpening service performed in our workshops

Professional gouge for carving and removing calluses; completely made of stainless steel

Pre-sale inspection and sharpening service performed in our workshops

Professional gouge for carving and removing calluses; completely made of stainless steel

Pre-sale inspection and sharpening service performed in our workshops

Professional gouge for carving and removing calluses; completely made of stainless steel

Pre-sale inspection and sharpening service performed in our workshops

Microfibre bag for folding knives, offered by Coltelleria Collini, confirms itself as an essential accessory for knife enthusiasts and for those who aspire to preserve their blades in impeccable condition. Characterized by generous dimensions of 180x80 mm, this bag has been meticulously designed to house and protect folding knives, using a quality microfibre material that guarantees effective defense against dust, abrasion and impacts.

Equipped with a practical drawstring closure system, enriched by a plastic thread holder, the bag ensures additional protection for the knives, preventing them from accidentally slipping out. The functionality of the drawstring allows for quick and simple sealing, making the bag extremely practical for both everyday and professional use.

The customization with the Coltelleria Collini logo imprinted on the bag not only elevates its aesthetic appearance, but also transforms it into a sign of belonging to our community of enthusiasts and customers.

Professional clipper suitable for very hard toenails
- Nickel-plated steel
- Large size
- Excellent quality
- Double spring
- Overhead cut

To ensure a perfect cut, Coltelleria Collini with its in-house sharpening workshop checks and overhauls every tool sold.

Knife handmade, designed and produced in only 10 copies (5 CPM-S30V steel sandblasted and 5 in RWL-34 steel coated TIN) from the known knifemaker Fabrizio "Silvester" Silvestrelli in collaboration with Collini Cutlery.

Further the CSFK feature is the ability to change at will the manicatura the same between the grips included in the package: Micarta Loveless, G10 or Black Paracord Camouflage. The knife can also be deprived of the grips to be used as a spearhead or to minimize the footprint thickness.

Intended use: tactical / collection
Type of production: made entirely by hand, limited and numbered
Production Country: Italy
Blade: stainless steel full-tang RWL-34 60 / 61HRC
Surface treatment: surface coating TIN "Advance Top" - Multi-layer aluminum and amorphous carbon titanium - Microhardness (HV 0.05): 3500 Vickers
Handle: Micarta Loveless / G10 / Paracord
Blade length: 135mm.
Blade Thickness: 5.5mm.
Overall length: 250mm.
Weight: 225g.
Sheath: Cordura, made in the USA, made by Blackhawk
Notes: knife made by the cutler Fabrizio "Silvester" Silvestrelli in only 5 specimens - certificate of guarantee and authenticity - key to remove the grips

Knife handmade, designed and produced in only 10 copies (5 CPM-S30V steel sandblasted and 5 in RWL-34 steel coated TIN) from the known knifemaker Fabrizio "Silvester" Silvestrelli in collaboration with Collini Cutlery.

Further the CSFK feature is the ability to change at will the manicatura the same between the grips included in the package: Micarta Loveless, G10 or Black Paracord Camouflage. The knife can also be deprived of the grips to be used as a spearhead or to minimize the footprint thickness.

Intended use: tactical / collection

Type of production: made entirely by hand, limited and numbered
Production Country: Italy
Blade: full tang CPM-S30V Stainless Steel 60 / 61HRC
Surface treatment: glass micropallinatura
Handle: Micarta Loveless / G10 / Paracord
Blade length: 135mm.
Blade Thickness: 5.5mm.
Overall length: 250mm.
Weight: 225g.
Sheath: Cordura, made in the USA, made by Blackhawk
Notes: knife made by the cutler Fabrizio "Silvester" Silvestrelli in only 5 specimens - certificate of guarantee and authenticity - key to remove the grips