Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Boker Plus - ME 109 Damast knife - 01BO909DAM - knife
The Messerschmitt Bf 109 was built from 1935 onwards and, with a production of around 33,000 aircraft, is the most widely produced fighter aircraft in the history of aviation. Officially, the type designation Bf 109 was never changed, even after BFW was renamed Messerschmitt AG. However, since all aircraft types later developed by Messerschmitt were given the model abbreviation ME, the name ME 109 also became established in the public consciousness for the Bf 109. In the 1930s, it marked the step towards a new generation of low-wing fighter aircraft with a closed pilot's cockpit, retractable landing gear and an all-metal construction of wings and fuselage. This new structure withstood far greater loads than the fabric-covered tubular constructions that had been common up to then, which also had the disadvantage of immense air resistance due to the necessary transverse bracing. As a result, the Messerschmitt's more compact and stable design allowed higher speeds with tighter radii during the cornering and dive maneuvers so crucial to fighter pilots. The Bf 109 was armed with two 20 mm MG FF machine guns in the wings and two 7.92 mm MG 17 machine guns. The latter were mounted directly in front of the pilot and coupled via an interrupter gear to the propeller shaft of the 1,000 hp Daimler V12 engine. In this way it was possible for the MGs to fire through the circular path of the spinning propeller without the projectiles hitting the rotating propeller blades. The MGs were thus very close to the pilot's line of sight. The pilot's seat was steel-plated inside the fuselage area to protect it from enemy fire.
The steel we were able to obtain for our Damascus project came from an E-series Messerschmitt Bf 109 that was shot down by a Royal Airforce Supermarine Spitfire in 1940 during the Battle of Britain near the village of Ashford in the British county of Kent. The specific parts are the rear plate of the pilot's steel-plated seat and the bearing sleeve of the propeller shaft. These are forged by Chad Nichols into a high-carbon, high-cut 80-layer Damascus.
The Boker Plus ME 109 Damascus picks up numerous design elements of the legendary Messerschmitt. The opening at the back of the blade base has the unmistakable shape of the pilot's cockpit and is visible when the knife is closed and open. The folds in the sheet metal of the engine cowling as recesses for the barrel soul axles of the two MG 17s form the template for the schor at the tip of the blade. The flipper indicates a wheel of the retractable landing gear. For the front carbon fiber shell, the material Toxic Storm from the manufacturer Fatcarbon Materials was chosen in the colors green, black and yellow. The color scheme is based on the characteristic camouflage paint of the Bf 109 with greenish-gray undercoat and yellow front fuselage. The opposite side has a titanium framelock with an elaborately integrated carbide contact surface. A beautifully designed and elaborately integrated clip allows the Boker Plus ME 109 to be worn tip-up on the right. Supplied with a high-quality case for storage and a certificate of authenticity.
Intended use: Sports / collection
Type of production: Industrial
Country of production: Taiwan
Blade: Damascus steel
Blade finish: -
Handle: in carbon fiber and titanium
Blade length: 80mm.
Blade thickness: 3.6 mm.
Total length: 180mm.
Weight: 66 g.
Clip: in stainless steel, removable
Closure: frame lock
Packaging: cardboard box with Boker Plus logos, zip case, guarantee certificate
Notes: pinball opening on bearings01BO909DAM -
Boker Plus - Urban Trapper Premium G-10 Jade by Brad Zinker - 01BO614 - folding knife
Intended Use: Sporting / Collection
Production Type: Industrial
Country of manufacture: Taiwan
Blade: M390 stainless steel
Blade treatment: Black PVD
Handle: titanium and G-10 jade
Blade length: 90mm.
Blade thickness: 2.6mm.
Total length: 196mm.
Weight: 100g.
Clip: titanium, machined from billet
Locking mechanism: Framelock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Brad Zinker - Ball bearing opening systemBO-01BO614 -
Boker Arbolito - Esculta Micarta - 02BA593M - Knife
Intended Use: Hunting / Utility
Production type: Industrial
Country of Production: Argentina
Blade: ful tang in stainless steel N695Co 58HRC
Blade finish: Satin finish
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.1mm.
Total length: 293mm.
Weight: 374g.
Scabbard: leather
Package: cardboard box with Boker logos
Notes: -BO-02BA593M -
Boker Plus - Urban Spillo Jade G10 - gentleman's knife - 01BO357 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: in 440C stainless steel
Blade treatment: black coating
Handle: steel liners and jade G10 grips
Blade length: 78mm.
Blade thickness: 3mm.
Total length: 176mm.
Weight: 47g.
Clip: removable, in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: pinball opening system on ball bearingsBO-01BO357 -
Boker Plus - Celos Slipjoint - G10 Jade - 01BO179 - knife
Intended Use: EDC/Gentleman
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 440C
Blade treatment: Satin finish
Handle: G10
Blade length: 67mm.
Blade thickness: 2.7mm.
Total lenght: 150mm.
Weight: 33g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: -
Package: Cardboard box with Boker logos
Notes: -BO-01BO179 -
Boker Plus - Kwaiken Air Mini G10 Jade by Lucas Burnley - 01BO331 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel VG10
Blade treatment: black coating
Handle: steel liners and jade G10 grips
Blade length: 78mm.
Blade thickness: 2.5mm.
Total length: 183mm.
Weight: 60g.
Clip: removable, stainless steel
Closure: liner lock
Package: cardboard box with Boker Plus logos, nylon case with zipper
Notes: Design by Lucas Burnley - ball bearing flipper opening systemBO-01BO331 -
Boker Plus - Kwaiken Air G10 Jade by Lucas Burnley - 01BO343 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel VG10
Blade treatment: black coating
Handle: steel liners and jade G10 grips
Blade length: 90mm.
Blade thickness: 2.5mm.
Total length: 213mm.
Weight: 82g.
Clip: removable, stainless steel
Closure: liner lock
Package: cardboard box with Boker Plus logos, nylon case with zipper
Notes: Design by Lucas Burnley - ball bearing flipper opening systemBO-01BO343 -
Fabrizio "Silvester" Silvestrelli - Custom CSFK - CPM-S30V - handmade knife
Knife handmade, designed and produced in only 10 copies (5 CPM-S30V steel sandblasted and 5 in RWL-34 steel coated TIN) from the known knifemaker Fabrizio "Silvester" Silvestrelli in collaboration with Collini Cutlery.
Further the CSFK feature is the ability to change at will the manicatura the same between the grips included in the package: Micarta Loveless, G10 or Black Paracord Camouflage. The knife can also be deprived of the grips to be used as a spearhead or to minimize the footprint thickness.
Intended use: tactical / collection
Type of production: made entirely by hand, limited and numbered
Production Country: Italy
Blade: full tang CPM-S30V Stainless Steel 60 / 61HRC
Surface treatment: glass micropallinatura
Handle: Micarta Loveless / G10 / Paracord
Blade length: 135mm.
Blade Thickness: 5.5mm.
Overall length: 250mm.
Weight: 225g.
Sheath: Cordura, made in the USA, made by Blackhawk
Notes: knife made by the cutler Fabrizio "Silvester" Silvestrelli in only 5 specimens - certificate of guarantee and authenticity - key to remove the grips9006 -
Wander Tactical - Mountain Lion - Stone Edge D2 & Loveless Micarta - custom knife
Intended Use: Excursionism / Heavy Duty
Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC
Blade Finish: Stone Edge
Handle: Micarta Loveless
Blade Length: 140mm.
Blade thickness: 6.3mm.
Total length: 255mm.
Balance: advanced
Weight: 425g.
Sheath: made of Kydex, thermoformed, with MOLLE compatible belt loop
Packaging: Made in Italy thermoplastic case with airtight closure and impact resistant
Notes: Each knife is unique and handcrafted in every partWT-MLK-SELM -
Wander Tactical - Uro Saw Marble knife - Green Micarta - craft knife
Intended use: Utility / Collection
Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: Marble
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balancing: advanced
Weight: 450g.
Sheath: in thermoformed kydex, with double belt loop, M.O.L.L.E. compatible
Packaging: without packaging, accompanied by certificate of authenticity, version with hallmark with WT and DP marks
Notes: Each knife is unique and made entirely by handWT-URS-MGM -
Wander Tactical - Hurricane Folder Gen.IV - DLC Green Micarta - folding knife
Intended use: Heavy Duty / Hiking / Tactical / Collection
Production type: industrial
Country of production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Black DLC
Handle: Titanium folders with micarta grip
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 120mm.
Total lenght: 210mm.
Thickness when closed: 13,6mm.
Weight: 164g.
Closure: Rockers Arm 8.11 with additional screw safety pin, removable
Clip: Titanium, removable and reversible
Package: Plastic box with Wander Tactical logos, warranty certificate, safety pin
Notes: 4th generation, production 2021WT-H4-PGM -
Boker Arbolito - El Gigante Micarta - 02BA595M - Knife
Intended Use: Hunting / Utility
Production type: Industrial
Country of Production: Argentina
Blade: ful tang in stainless steel N695Co 58HRC
Blade finishing: Satin finish
Handle: Micarta
Blade length: 236mm.
Blade thickness: 6.2mm.
Total length: 379mm.
Weight: 445g.
Sheath: leather
Package: cardboard box with Boker logos
Notes: -BO-02BA595M -
Wander Tactical - Uro Saw - Raw and Green Micarta - handmade knife
Intended Use: Utility / Collection
Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balance: Advanced
Weight: 450g.
Sheath: thermoformed kydex, with double belt loop, M.O.L.L.E. compatible.
Package: unpacked, accompanied by certificate of authenticity
Notes: Each knife is unique and made entirely by handWT-UR-S-RGM -
Wander Tactical - Smilodon - Marble and Green Micarta - handmade knife
Production type: Heavy duty hiking / Collection
Production type: Handmade
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Marble
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 360mm.
Balance: set back from the guard branch
Weight: 644g.
Scabbard: Kydex, thermoformed
Packaging: unpacked, accompanied by certificate of authenticity
Notes: Each knife is unique and made entirely by handWT-SM-MBGM -
Olamic Cutlery - Wayfarer 247 - Kinetic Rainforest - 5 Holes Violet - custom knife
The Wayfarer 247 was initially released in May 2016 and since then Olamic has continuously refined the design and the model, enriching it with features, options and customizations to choose from to create millions of possible combinations on the model. In May 2018 the range is extended by offering 4 different blade shapes to choose from: drop point, harpoon, sheepscliffe and much more.
Intended use: collection / sports
Type of production: Artisan
Lama Production: Visalia, California, USA
Blade: M390 stainless steel - Acidwash
Handle: kinetic rainforest titanium with purple anodizing, screws and kinetic rainforest spacer
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 123mm.
Total length: 207mm.
Thick when closed: 12.5mm.
Weight: 136g.
Opening: carson flipper system on movement with ball bearings
Closure: FrameLock
Clip: titanium kinetic rainforest
Packaging: hard-copy textile case with zip closure and Olamic Cutlery logos - certificate of guarantee and authenticity with serial number
Notes: each Olamic knife is unique and made entirely by hand in different combinations of materials, finishes, colors and details - each knife is numberedOC-W247-KRV -
Wander Tactical - Hurricane Lava Flow Custom - Bronze Finish and G10 Jade - folding knife
Single piece custom version of the standard Hurricane model - blade, folders, clips and screws modified by hand by the Wander Tactical knife designer Dino Picco - The finish of the "Bronze" blade is obtained through a natural oxidation process that takes place at the end of the hardening phase cryogenic.
Type of production: semi-industrial
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Lama treatment: Bronze flow
Manicure: Aluminum (alluminium)
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 215mm.
Balancing: set back
Weight: 187g.
Package: -
Notes: clip, blade lock Rockers Arm 8.11 - safety pinWT-HU-C -
Wander Tactical - Hurricane Custom Gate - Raw Finish and G10 Jade - folding knife
Unique piece custom version of the standard Hurricane model - blade, folders, clips and hardware modified by hand by the Wander Tactical knife designer Dino Picco
Type of production: semi-industrial
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Lama treatment: Black Blood
Manicure: Aluminum (alluminium)
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 215mm.
Balancing: set back
Weight: 187g.
Package: -
Notes: clip, blade lock Rockers Arm 8.11 - safety pinWT-HUR-GBB -
Wander Tactical - Megalodon Special Edition - Pitch Black & Jade G10 - custom knife
Type of production: Custom made
Blade production: Italy
Blade: D2 steel to 59 / 60HRC
Blade Treatment: GunKote
Manicure: Jade G10
Blade Length: 150mm.
Blade thickness: 6.5mm.
Total Length: 285mm.
Balancing: backward
Weight: 508g.
Sheath: in Kydex, thermoformed
Packing: -
Notes: "One of a Kind" Special EditionWT-MESEJ -
Boker Plus - Kwaiken Folder by Lucas Burnley - 01BO291 - folding knife
Intended use: Sports
Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel AUS-8
Blade treatment: stonewashed
Handle: Steel liners, bolsters with green micarta
Blade length: 90mm.
Blade thickness: 3.2mm.
Overall length: 213mm.
Weight: 118g.
Clips: stainless steel
Lock: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Lucas Burnley - opening system IKBS on ball bearingsBO-01BO291 -
Boker Plus - Subcom Folder - 01BO594 - knife
Boker Plus - Subcom Folder - 01BO594 - knife
Intended use: Sport
Blade: steel AUS-8 stainless partially serrated Black
Handle material: stainless steel and Zytel
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 68mm.
Overall length: 117mm.
Balancing: -
Weight: 74g.
Lock: Frame Lock
Clip: removable and reversible stainless steel
Sheath: -
Notes: -BO-01BO594