Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Zero Tolerance - KVT Folder Knife - MagnaCut & Carbon Fiber - ZT0545 - Knife
The slim profile and carbon fiber handle provide comfortable and lightweight carry for the Zero Tolerance 0545. Moreover, the 0545 model is appropriately sized for serious cutting tasks. The CPM MagnaCut steel blade is balanced and highly performant.
Aesthetically, this ZT Original boasts a clean design without visible screws for the pocket clip.
Produced in the United States, the premium CPM MagnaCut steel of the blade, achieved through powdered metallurgy, excels in edge retention, corrosion resistance, wear resistance, and toughness; the stonewashed finish helps conceal signs of use.
The blade opens easily and effortlessly thanks to the KVT system with ball bearings, washers, and flipper.
Intended use: EDC/Sport/Collection
Production type: Industrial
Blade production: USA
Blade: CPM Magnacut Steel 60-63 HRC
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 81mm
Blade thickness: 2.3mm
Closed length: 109mm
Overall length: 190mm
Weight: 57g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: KVT opening on ball bearingsZT0545 -
Zero Tolerance - Sinkevich Folder - 0450BLUCF - Flipper Knife Blue CF - Knife
As an elegant and refined alternative to the original 0450, Zero Tolerance presents the 0450BLUCF model with that extra touch.
The CPM MagnaCut blade steel represents exceptional toughness, wear resistance, and unparalleled edge retention.
The classic stonewash finish of the blade with ball bearings highlights the robust side of the Frame Lock Folder and complements the blue marbled carbon front handles and the titanium handle area on the back.
With a reversible clip for pocket carry and a lanyard hole. Made in the USA.
Intended use: EDC/Sport/Collection
Production type: Industrial
Blade production: USA
Blade: CPM Magnacut steel
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 82mm
Blade thickness: 3mm
Closed length: 111mm
Overall length: 187mm
Weight: 68g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearingsZT0450BLUCF -
Zero Tolerance - ZT0006BLK - Limited Edition Sprint Run - CPM-3V & Black G10 - knife
Intended Use: Tactical / Sporting
Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market onlyZT0006BLK -
Zero Tolerance - ZT0006 - CPM-3V - OD Green G10 - fixed blade, single edge knife, Made in USA
Intended Use: Tactical / Sporting
Type of production: Industrial
Country of manufacture: USA
Blade: full tang in CPM-3V carbon steel
Blade treatment: Microbead blasting and Cerakote protective treatment
Handle: G10 OD Green with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos.
Notes: -ZT0006 -
Zero Tolerance - Tim Galyean - Copper - Factory Special Series - ZT0022CU - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: stone washed
Handle: Bronze and Titanium
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thickness when closed: 11.1mm.
Weight: 80g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings via Carson Flipper system - Limited Edition "Factory Special Series"ZT0022CU -
Laguiole En Aubrac - raw buffalo horn - knife
Destination: French regional collector's knife
Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: raw buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 72 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: AbsentL0512CBI/FSI1 -
Zero Tolerance - ZT0990 knife - CPM 20CV - Carbon Fiber - knife
Based on the award-winning ZT 0999, the 0990 simplifies this legendary design. Despite the skeletonized structure, this ZT is reliable and robust thanks to the steel structure.
Intended use: Sports / Tactical / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber and steel
Blade length: 83mm.
Blade thickness: 3mm.
Closed length: 114mm.
Total length: 193mm.
Thick when closed: 114mm.
Weight: 82g.
Closure: liner lock
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: flipper opening system on ball bearings - Manual KVT ball bearingsZT0990 -
Zero Tolerance - ZT0762 knife - CPM 20CV - Carbon Fiber - knife
Intended use: Sports / Tactical / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Black carbon fiber with aluminum spacers
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 126mm.
Total length: 206mm.
Thick when closed: 112mm.
Weight: 82g.
Closure: Sub Framelock in hardened steel
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Tuned Detent System (TDS ™) opening systemZT0762 -
Laguiole En Aubrac - Le Randonneur knife - Boxwood collection knife
Intended use: Sports
Type of production: artisanal
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: -
Handle: Boxwood
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: 119mm.
Total length: 219mm.
Thick when closed: 16mm.
Balancing: -
Weight: 70g.
Closure: Simple spring
Clip: -
Sheath: -
Packaging: cardboard tubular box with Laguiole en Aubrac logos
Note:L0512RBI-LSB1 -
Laguiole en Aubrac - Sommelier sabre Lisse Origine Concorde - Sabrage
Laguiole en Aubrac - Sommelier sabre Lisse Origine Concorde - Sabrage
Sabrage is a special technique for opening champagne bottles with a sabre (sabre in French), usually used as a ceremonial gesture. The sabre is slid along the body of the bottle towards the neck with a sharp blow. The force of the blade striking the lip of the neck is sufficient to break the glass and separate the neck cleanly from the bottle collar which, together with the cork, is shot away by the force of the gas contained in the wine. When applied correctly, the technique is effective with any sparkling wine.
This practice became popular in Napoleonic France when the army visited the aristocratic domains belonging to the empire. The period was just after the French Revolution and the sabre was the weapon of choice for the army's light cavalry, the hussars. Given the numerous victories achieved by the army, there were many celebrations, during which it was customary to open the bottles by a convenient and easily available means. It seems that during one of these celebrations Napoleon himself said 'Champagne! In victory it is a merit; in defeat a necessity', thus encouraging its use and practice.
Champagne sabre entirely handmade in the town of Laguiole.
Authentic champagne sabre of premium Laguiole en Aubrac quality.
Unique piece of Sanvik 12C27 stainless steel, a martensitic stainless steel.
The composition of carbon and chromium offers a unique combination of properties including: very high hardness, very high wear and corrosion resistance.
White resin handle.
Each piece is a unique work of art, handmade by a craftsman.
Delivered in a gift box, manufactured in Aubrac, France
Blade: Stainless steel 12C27 mirror polished - unsharpened
Handle: WHITE RESIN
Blade length: 265mm
Total length: 405mm
Weight: 298g
Packaging: Wooden box with Laguiole en Aubrac logos.
C1S99OC -
Zero Tolerance - Coyote Flipper Frame Lock - Titanium - ZT0308 - Knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: BlackWash
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Note: -ZT0308BLKTS -
Laguiole en Aubrac - Set with acacia cutting board with cheese cutting thread and classical cheese knife
Laguiole en Aubrac - Set with acacia cutting board with cheese cutting thread and classical cheese knife
LAGUIOLE EN AUBRAC is one of the five blacksmiths that still forge knives around the village of Laguiole in southern France according to a centuries-old tradition and turn them into real gems of craftsmanship. Each piece is unique and from wood to mammoth ivory there is hardly any limit to the exclusivity of the materials. Laguiole en Aubrac - acacia board with cheese cutting wire and cheese knife A set of the extra class for every cheese connoisseur and lover of a well-tended cheese platter.
The simple rectangular acacia wood board has a groove and a cutting wire with a stainless steel bracket.
The set also includes the cheese knife with a classic shape, ornament and bee. High-gloss polished stainless steel jaws. This cheese knife is also available in buffalo horn and different types of wood. Suitable for all Laguiole en Aubrac cutlery. The set is delivered in a elegant paper box.
Manufacturer: Laguiole en Aubrac
Handcrafted French Classical cheese knife - 24.5 cm
Blade 12,5 cm
12C27 stainless steel Corn handle.
SETFRGM -
Laguiole En Aubrac - Sauveterre knife in buffalo horn - handmade knife
French regional knife handcrafted in the city of Sauveterre
Blade: Swedish 12C27 to 54HRC stainless steel.
Handle: horn
Blade length: 90 mm.
Blade thickness: 3 mm.
Total length: 200 mm.
Weight: 90 g.
Folders: Stainless Steel
Heads: Stainless steel
Closure: Stainless steel retention spring
Clip: Absent
Sheath: AbsentSA509BUI -
Laguiole En Aubrac - Oyster Opener Knife with mussel shell handle - Gift box
Laguiole En Aubrac - Oyster Opener Knife with mussel shell handle - Gift box
Ref.C2I99CQMIH - Oyster knife with mussel shell handle Presitigioso Open Oysters Laguiole En Aublrac.
Handcrafted realization
Blade: 12C27
Stainless Steel Handle: in shell of mussels.
Blade length: 60 mm.
Blade thickness: 3 mm. T
otal length: 180 mm.
Packaged in an elegant wooden box.
8169C -
Zero Tolerance - Flipper Frame Lock - Carbon Fiber - ZT0707 - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and Carbon Fiber
Blade length: 89mm.
Blade thickness: 3.1mm.
Length closed: 117mm.
Total length: 210mm.
Weight: 68g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: New Tuned Detent System (TDS) which allows easy knife opening, even by exerting pressure on the titanium frame lockZT0707 -
Zero Tolerance - ZT0235 - Jens Anso - Carbon Fiber SlipJoint - knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens AnsoZT0235 -
Zero Tolerance - SpeedSafe Flipper - BlackWash - ZT0357BW - knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: BlackWash
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper systemZT0357BW -
Zero Tolerance - SpeedSafe Flipper - Stone Washed - ZT0357 - knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: Stone Washed
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper systemZT0357 -
Coltelleria Collini - Animals Scissors straight blade - 8 ''
Scissors straight blade animals - 8 '' Scissors specifically designed for thinning and shearing of animals The scissors of the Style series are produced in high carbon content stainless steel, characterized by semi-convex blades and concave inner surface to significantly reduce the effort of the hand during cutting, thus guaranteeing a cutting performance easier, precise and lasting. Material: 420 Stainless steel brushed straight blade: Blade length: 9 cm Total length: 8 inch - 19 cm Sharpening: Plain / smooth Finger rest: Fixedcollini8,5 -
Zero Tolerance - Coyote Flipper Frame Lock - Titanium - ZT0308 - Knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Note: -ZT0308 -
Zero Tolerance - ZT0230 - Jens Anso - Carbon Fiber SlipJoint - knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens AnsoZT0230 -
Zero Tolerance - Tim Galyean knife - Flipper Carbon Fiber - ZT0022 - knife
Intended use: Sports / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed
Handle: Carbon Fiber and Titanium with anodized spacers
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thick when closed: 11.1mm.
Weight: 50g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings using the Carson Flipper systemZT0022 -
Collini Cutlery - Scissors Thinning mod. Style by Salon Professional 6"
Scissors Thinning mod. Style by Salon Professional 5.5 "
Material: Stainless steel 420 satined
Blade: a smooth and notched
Blade Length: 5.5 cm
Overall Length: 5.5 Inches - 14,5 cm
Sharpening: Plain
Finger rest: Removable
Weight: 46 gr.Each scissor is controlled by our laboratory in order to ensure a perfect cut
collini29 -
Collini Cutlery - Scissors Thinning Style by Salon Professional 5.5"
Scissors Thinning mod. Style by Salon Professional 5.5 "
Material: Stainless steel 420 satined
Blade: a smooth and notched
Blade Length: 5.5 cm
Overall Length: 5.5 Inches - 14,5 cm
Sharpening: Plain
Finger rest: Removable
Weight: 46 gr.Each scissor is controlled by our laboratory in order to ensure a perfect cut
collini026B -
Coltelleria Collini - Chef's food tongs - Beak - 15 cm
Coltelleria Collini - Chef's food tongs - Beak - 15 cm
Chef's food tongs with beak - 15 cm.
Stainless steel chef's tongs, useful for checking the cooking of food and making it easier to grip. Its curved shape makes it possible to move and check the food more precisely, especially for the plating and decorating of sweet or savoury dishes.
Ideal especially for preparing sushi dishes.
Specifications:
Dishwasher safe
Length: 15cm.
collini0013 -
Laguiole En Aubrac - Olive Wood Stainless Steel Wine and Cheese Set in box 3 Pieces
Laquiole En Aubrac Waiters Corkscrew Wine Opener Forged stainless steel blades Olive wood handles, finished by hand Unique Laguiole is pronounced "Laiole" is a village in France renewed for its artisanal hand finished cutlery. Inspired by this region of the world , this set has preserved the craftsmanship in its manufacturing process. The metal is forged then finished and assembled by hand. The Ulive Wood access add the finishing touch to this big-quality laguiole product. Laguiole Set of Wine and Cheese Set Stainless steel blades Smooth easy grip wood handles Unique wood veneer Stone Finished steel blade and Ulive wood hadles Built to last with with quality materials. Olive wood is exceptional quality Veneer handle is implanted with phenolic thermosetting resins which creates a durable dimension stable handle Moisture resistant finishes last a lifetime The color in the Olive wood and grain structure creates unique to each piece Wooden presentation box 2 knives lenght 24cm cheese/ 18cm butter1253SET -
Coltelleria Collini - Scissors for animals mod. straight blade - 9 ''
Scissors for animals mod. straight blade - 9 '' Scissors specifically designed for thinning and shearing of animals The scissors of the Style series are produced in high carbon content stainless steel, characterized by semi-convex blades and concave inner surface to significantly reduce the effort of the hand during cutting, thus guaranteeing a cutting performance easier, precise and lasting. Material: 420 Stainless steel brushed straight blade: Blade length: 12 cm Total length: 9 inch - 23 cm Sharpening: Plain / smooth Finger rest: Fixed Each scissor is controlled by our laboratory in order to ensure a perfect cutcollini34 -
Coltelleria Collini - Animals Scissors straight blade - 8 ''
Scissors straight blade animals - 8 '' Scissors specifically designed for thinning and shearing of animals The scissors of the Style series are produced in high carbon content stainless steel, characterized by semi-convex blades and concave inner surface to significantly reduce the effort of the hand during cutting, thus guaranteeing a cutting performance easier, precise and lasting. Material: 420 Stainless steel brushed straight blade: Blade length: 9 cm Total length: 8 inch - 19 cm Sharpening: Plain / smooth Finger rest: Fixedcollini33 -
Laguiole en Aubrac - Set of 3 grey glitter resin Cheese Knives
Laguiole GREY GLITTER RESIN Cheese Knives - Laguiole En Aubrac, Set of 3 These heirloom-quality knives, designed to last a lifetime and crafted by French artisans with the highest-quality materials, make a truly special gift for wedding or corporate events, finely crafted knives. An exquisite gift or elegant complement to your wine & cheese fete. Each set includes 3 knives packaged in a wooden storage box. The blades are forged from ultrastrong Sandvik steel. The handles are handcrafted from ;grey glitter resin Made in France's Laguiole region. Includes a certificate of authenticity and a lifetime warranty. Set includes 3 pieces: plane, knife and soft cheese spreader. Size (inches): 1 1/2w x 9h (plane), 1w x 9 1/4h (knife), 1w x 7 1/4h (soft spreader) Genuine Laguiole en Aubrac grey glitter resin cheese knives are hand-made in France by master craftsmen and guaranteed for life.5551CORIAN -
Zero Tolerance - Hinderer Slicer Frame Lock - Carbon Fiber - ZT0562CF - knife
Intended use: Tactical / Military
Type of production: Industrial
Production Lama USA
Blade: Stainless steel Elmax
Treatment Blade: Stonewashed
Handle: Stainless Steel and CTS-204P
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 113mm.
Overall length: 206mm.
Thick when closed: 12mm.
Balancing: -
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - KVT Ball Bearing SystemZT0562CF -
Coltelleria Collini - Animal shearing scissors with straight perforated blade - 8''
Coltelleria Collini - Animal shearing scissors with straight perforated blade - 8''
Scissors specially designed for shearing animals. The scissors of the Style series are made of high carbon stainless steel and feature perforated blades to significantly reduce hand strain during cutting, thus ensuring an easier, more precise and long-lasting cutting performance.
Material: 420 stainless steel
Straight blade: Perforated
Blade length: 9 cm
Total Length: 8 Inches - 19 cm (with finger rest 21 cm)
Sharpening: Flat Finger rest: Fixed
Each scissor is checked by our internal laboratory in order to guarantee a perfect cut.
colliniblack -
Zero Tolerance - Sinkevich Folder Titanium - ZT0450 - knife
The original Zero Tolerance 0454 was an award-winning collaboration between ZT and custom knife designer Dmitry Sinkevich. But it was also a very Limited Edition knife.
So ZT is doing something about that with the new 0450. While based on the original’s streamlined form and high-performance function, this new and more compact version will be much more readily available. With its 3.25-inch blade and lightweight-yet-stronger-than-steel titanium handles, the 0450 has a sleek and sophisticated look that, we think, makes it a perfect EDC.
ZT built it with an S35VN stainless blade that sharpens to a razor edge, holds it well, and can be resharpened easily. The knife opens smoothly and easily with the KVT ball-bearing opening system and built-in flipper. A titanium frame lock with hardened steel lockbar insert ensures solid lock up. Polished pivot hardware just adds to the 0450's refined good looks.
Sinkevich Folder Titanium - ZT0450 - knife
Intended use: Sport / Collection
Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: -
Handle: Titanium
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 111mm.
Overall length: 187mm.
Thick when closed: -
Balancing: -
Weight: 84g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Dmitry Sinkevich - Opening KVT ball-bearingZT450 -
Zero Tolerance - Carbon Fiber Flipper Folder - ZT0770CF - knife
Intended use: Tactical / Military
Type of production: Industrial
Production Country: USA
Blade: Stainless Steel CPM-S35VN 59/61HRC
Treatment Llama: Stonewashed
Handle: Carbon Fibre
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Overall length: 190mm.
Thick when closed: 13mm.
Balancing: -
Weight: 85g.
Lock: Liner Lock
Clip: Removable and multi-position, stainless steel
Packaging: cardboard box with logos Zero Tolerance
Note: Opening system SpeedsafeZT0770CF -
Coltelleria Collini - Stainless steel cutter for ingrown toenails 10 cm
Classic series nail clippers are manufactured from high cobalt stainless steel.
Professional, stylish, sturdy, practical nail clippers suitable for ingrown nails
- Stainless steel
- Excellent quality
- Single spring
- Total size: 10 cm.To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening laboratory, checks and overhauls every tool sold.
collini23 -
Coltelleria Collini - Stainless steel cutter for ingrown toenails 12 cm
Classic series nail clippers are manufactured from high cobalt stainless steel.
Professional, stylish, sturdy, practical nail clippers suitable for ingrown nails
- Stainless steel
- Excellent quality
- Single spring
- Total size: 12 cm.To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening laboratory, checks and overhauls every tool sold.
collini025 -
Coltelleria Collini - Stainless steel cutter for ingrown toenails 13 cm
Classic series nail clippers are made of high cobalt stainless steel.
Professional, stylish, sturdy, practical nail clippers suitable for ingrown nails
- Stainless steel
- Excellent quality
- Single spring
- Total size: 13 cm.To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening workshop, checks and overhauls every tool sold.
collini027 -
Coltelleria Collini - Chef's tongs for food - Sushi - 21cm
Coltelleria Collini - Chef's tongs for food - Sushi - 21cm
CHEF'S TONGS
Stainless steel chef's tongs, useful for checking the cooking of food and making it easier to grip. Its curved shape makes it possible to move and check the food more precisely, especially for the plating and decoration of sweet or savoury dishes.
Ideal especially for preparing sushi dishes.
Technical features:
Dishwasher safe
Length: 21cm.
collini0012 -
Coltelleria Collini - microfibre cloth for cleaning blades - accessory
The microfibre cloth for cleaning blades, offered by Coltelleria Collini, represents an essential accessory for cutlery enthusiasts and for those who want to keep their blades always in perfect condition. This cloth, measuring 15x15 cm, has been designed to offer effective cleaning of the blades, easily removing fingerprints, grease and dirt without leaving streaks or scratches.
Personalized with the Coltelleria Collini logo, this cloth is not only a practical maintenance tool, but also becomes a symbol of belonging to our community of enthusiasts and customers.
Suitable for both daily and professional use, the microfibre cloth for cleaning blades is the accessory that cannot be missing from every knife lover's collection.
CC-PANNOMF -
Coltelleria Collini - Stainless steel cutter for ingrown toenails 14 cm
Classic series nail clippers are made of high cobalt stainless steel.
Professional, stylish, sturdy, practical nail clippers suitable for ingrown nails
- Stainless steel
- Excellent quality
- Double spring
- Total size: 14 cm.To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening laboratory, checks and overhauls every tool sold.
collini037 -
Coltelleria Collini - Black Hat - Gadgets
Black Hat - Gadgets
Comfortable 100% cotton baseball cap with embroidery Collini Cutlery.
The baseball cap is useful in all situations, with a modern pre-curved visor, a comfortable shelter from the sun, and the light summer rain, very breathable and durable cotton.
One size fits all adjustable through system closing on the back.
collini-hat -
Coltelleria Collini - Stainless nail clippers 12 cm
Style series nail clippers are manufactured from high-carbon stainless steel.
Professional, stylish, sturdy, practical nail clippers suitable for hand manicures
- Stainless steel
- Excellent quality
- Single spring
- Total size: 12 cm.To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening workshop, checks and overhauls every tool sold.
collini034 -
Coltelleria Collini - Stainless Steel Cutter for Skins
Style series cutters are manufactured from high-carbon stainless steel.
Professional, stylish and practical cutters suitable for hand manicures
- Stainless steel at
- Excellent quality
- Single spring
- Cutting size: 5 mm or 7 mmTo ensure a perfect cut, Coltelleria Collini with its in-house sharpening workshop checks and overhauls every tool sold.
collini036 -
Coltelleria Collini - Professional Hairdressing Scissors 5.5"
Classic series hairdressing scissors
Material: satin-finish 420 stainless steel
Blade: smooth
Blade Length: 5 cm
Total Length: 5.5 Inches - 14 cm
Sharpening: Flat
Finger Rest: Removable
Weight: 44 gr.Each scissor is checked by our in-house laboratory in order to ensure a perfect cut
collini012 -
Laguiole En Aubrac - Capucin carbon and bronze - 8cm - collection knife
Intended use: Sports / collection
Type of production: Industrial
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: satin
Handle: carbon fiber and copper
Blade length: 77mm.
Blade thickness: 2.5mm.
Closed length: 100mm.
Total length: 177mm.
Thick when closed: 20mm.
Balancing: -
Weight: 47g.
Closing: -
Clip: -
Sheath: -
Packaging: -
Note: -L0510CCBI -
Coltelleria Collini - microfibre bag for folding knives - 180 X 80 mm - accessory
Microfibre bag for folding knives, offered by Coltelleria Collini, confirms itself as an essential accessory for knife enthusiasts and for those who aspire to preserve their blades in impeccable condition. Characterized by generous dimensions of 180x80 mm, this bag has been meticulously designed to house and protect folding knives, using a quality microfibre material that guarantees effective defense against dust, abrasion and impacts.
Equipped with a practical drawstring closure system, enriched by a plastic thread holder, the bag ensures additional protection for the knives, preventing them from accidentally slipping out. The functionality of the drawstring allows for quick and simple sealing, making the bag extremely practical for both everyday and professional use.
The customization with the Coltelleria Collini logo imprinted on the bag not only elevates its aesthetic appearance, but also transforms it into a sign of belonging to our community of enthusiasts and customers.
CC-BAGMF -
Fabrizio "Silvester" Silvestrelli - Custom CSFK - Black RWL34 - handmade knife
Knife handmade, designed and produced in only 10 copies (5 CPM-S30V steel sandblasted and 5 in RWL-34 steel coated TIN) from the known knifemaker Fabrizio "Silvester" Silvestrelli in collaboration with Collini Cutlery.
Further the CSFK feature is the ability to change at will the manicatura the same between the grips included in the package: Micarta Loveless, G10 or Black Paracord Camouflage. The knife can also be deprived of the grips to be used as a spearhead or to minimize the footprint thickness.
Intended use: tactical / collection
Type of production: made entirely by hand, limited and numbered
Production Country: Italy
Blade: stainless steel full-tang RWL-34 60 / 61HRC
Surface treatment: surface coating TIN "Advance Top" - Multi-layer aluminum and amorphous carbon titanium - Microhardness (HV 0.05): 3500 Vickers
Handle: Micarta Loveless / G10 / Paracord
Blade length: 135mm.
Blade Thickness: 5.5mm.
Overall length: 250mm.
Weight: 225g.
Sheath: Cordura, made in the USA, made by Blackhawk
Notes: knife made by the cutler Fabrizio "Silvester" Silvestrelli in only 5 specimens - certificate of guarantee and authenticity - key to remove the grips9005 -
Fabrizio "Silvester" Silvestrelli - Custom CSFK - CPM-S30V - handmade knife
Knife handmade, designed and produced in only 10 copies (5 CPM-S30V steel sandblasted and 5 in RWL-34 steel coated TIN) from the known knifemaker Fabrizio "Silvester" Silvestrelli in collaboration with Collini Cutlery.
Further the CSFK feature is the ability to change at will the manicatura the same between the grips included in the package: Micarta Loveless, G10 or Black Paracord Camouflage. The knife can also be deprived of the grips to be used as a spearhead or to minimize the footprint thickness.
Intended use: tactical / collection
Type of production: made entirely by hand, limited and numbered
Production Country: Italy
Blade: full tang CPM-S30V Stainless Steel 60 / 61HRC
Surface treatment: glass micropallinatura
Handle: Micarta Loveless / G10 / Paracord
Blade length: 135mm.
Blade Thickness: 5.5mm.
Overall length: 250mm.
Weight: 225g.
Sheath: Cordura, made in the USA, made by Blackhawk
Notes: knife made by the cutler Fabrizio "Silvester" Silvestrelli in only 5 specimens - certificate of guarantee and authenticity - key to remove the grips9006 -
Laguiole en Aubrac - 3-piece cheese set - guim blanc
Laguiole en Aubrac 3-piece cheese set - guim blanc
The knives by Laguiole en Aubrac combine the long tradition of knife makers in perfect symbiosis with a penchant for perfection, while the price, though, can be measured in worldly standards.
As is for all genuine French Laguiole knives, the traditional shepherds cross in the RESIN GUIM handle, the hand-made engravings on the spine and the bee are a must, including for this cheese set.
It is carefully manufactured by hand and reflects the French tradition and dining culture. Please hand wash (only).
5551 -
Laguiole En Aubrac - Alsacien Ebony - ALS99EBC / NSB1 - knife collection
Destination: French collector's regional knife
Blade: 12C27 Swedish polished stainless steel to 54HRC.
Handle: ebony wood
Blade length: 70 mm.
Blade thickness: 2.5 mm.
Total length: 180 mm.
Weight: 70 g.
Folders: Stainless Steel
Heads: Stainless Steel
Closure: Retention spring
Clip: Absent
Sheath: Absent2481 -
Laguiole En Aubrac - Le Randonneur knife - Ginepro coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: artigianale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Ginepro
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512REI-LSB1 -
Laguiole En Aubrac - Le Randonneur knife - Oak knife collection
Intended use: Sports
Type of production: artisanal
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: -
Handle: Oak wood
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: 119mm.
Total length: 219mm.
Thick when closed: 16mm.
Balancing: -
Weight: 70g.
Closure: Simple spring
Clip: -
Sheath: -
Packaging: cardboard tubular box with Laguiole en Aubrac logos
Note:L0512RHI-FSB1 -
Laguiole En Aubrac - Le Randonneur knife - Olivo coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: artigianale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Olivo
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512RLI-LSB1 -
Laguiole En Aubrac - Le Randonneur knife - Wengè coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Wengè
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512RWI-LSB1 -
Laguiole En Aubrac - Texalium - coltello collezione
Coltello chiudibile realizzato artigianalmente dalla Laguiole En Aubrac una delle migliori e più antiche aziende francesi produttrici di coltelli “Laguiole”.
– Acciaio Lama: 12C27 lucidata a specchio
– Manicatura: in Fibra di Carbonio e Texalium
– Lunghezza totale: cm 21,5
– Lunghezza lama: cm 10
– Molla e “mosca” o “ape” (simbolo che contraddistingue un Laguiole visibile sul dorso del coltello) forgiata
– Peso: 89 grammi
3258 -
Laguiole En Aubrac - Ebony and Mammoth Fossil Ivory - Knife
Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.
Intended use: regional/collectible
Type of production: handcrafted
Blade: stainless steel Sandvik 12C27
Country of manufacture: France
Handle: ebony wood with mammoth fossil ivory insert
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 220mm.
Weight: 104g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L-ENEBAVFM -
Laguiole En Aubrac - Le Camembert - Pistachio Wood - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This knife is dedicated to Camembert and is sold in the round wooden box typical of this famous cheese known throughout the world.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Stainless steel 12C27
Country of production: France
Handle: Pistachio wood
Blade length: 80mm.
Blade thickness: 2.6mm.
Length closed: 110mm.
Total length: 193mm.
Weight: 88g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: wooden boxCB-PIST -
Laguiole En Aubrac - Raw Buffalo Horn with Damascus Steel Blade - Knife
Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.
Intended use: regional/collectible
Type of production: handcrafted
Blade: stainless damasci steel
Country of manufacture: France
Handle: raw buffalo horn
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 220mm.
Weight: 104g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0512CBI/FDBI1 -
Laguiole En Aubrac - Horn point - spring engraved with Maltese cross - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.
The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration.
The back spring (with the Maltese cross symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Stainless steel 12C27
Blade production: France
Handle: Blond cow horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -LEA-croce-m -
Laguiole En Aubrac - Horn Point - spring engraved with Pilgrim's Shell - VG10 in Sanmai - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.
The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration.
The back spring (with the Pilgrim's shell symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme.
The blade uses 67-layer Japanese VG10 rolled steel, manufactured by Takefu Steel.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Damascus and Japanese VG10 rolled steel
Blade production: France
Handle: Blond Cowhorn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -aubrac-conchiglia -
Laguiole En Aubrac - Hunteing knife - Ebony - L0514EBI - knife
These high quality knives, are handcrafted in the tradition of French Thiers cutlery.
This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.
The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.
The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly.
The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs.
The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.
Intended Use: Regional/Collection/Outdoor/Hunting
Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0514EBI -
Zero Tolerance - Sinkevich - S35VN Red Blackwash - Factory Special Series - ZT0452RDBW - knife
Intended Use: Tactical/Military
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: Blackwash
Handle: Titanium Blackwash and Carbon Fiber Red and Black
Blade Length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 235mm.
Thickness when closed: 13mm.
Weight: 125g.
Closure: Frame Lock
Clip: stainless steel, removable and multi-position
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings - Opening via Carson Flipper system - Limited Edition "Factory Special Series"ZT0452RDBW