bing
News
Best news of March
Shop By
Shopping Options
Brand
  1. Acta Non Verba 17items
  2. Aitor 21items
  3. Antonini 20items
  4. Benchmade 279items
  5. BlackFox 35items
  6. Boker 245items
  7. Cold Steel 158items
  8. Coltelleria Collini 54items
  9. Consigli 55items
  10. CRKT 99items
  11. Due Cigni 1item
  12. Extrema Ratio 301items
  13. Fallkniven 100items
  14. Fox Knives 402items
  15. Gastronom Knives 1item
  16. Global Knives 3items
  17. Horl 6items
  18. Ka Bar 77items
  19. Kai Knives 8items
  20. Laguiole en Aubrac 95items
  21. Leatherman 7items
  22. Lion Steel 128items
  23. Maserin 220items
  24. Mcusta 75items
  25. Nitecore 13items
  26. Opinel 86items
  27. Pfeil 7items
  28. Roselli 18items
  29. Saji Takeshi 45items
  30. Sanelli 7items
  31. Spyderco 203items
  32. Victorinox 44items
  33. Viper 203items
  34. Wahl 1item
  35. Wusthof 6items
  36. Zero Tolerance 105items
  37. Zwilling 3items
  38. Approved 174items
  39. Peltonen 9items
  40. ADV Tactical 24items
  41. Ahti 10items
  42. Al-Mar 6items
  43. Andrew Demko Knives 5items
  44. Arkansas 2items
  45. ATC 4items
  46. Azero 3items
  47. Bark River 10items
  48. Basko 1item
  49. Bastinelli Knives 12items
  50. Bear and Son 1item
  51. Begg Knives 7items
  52. Beltrame 1item
  53. Benchmark 1item
  54. Beretta 2items
  55. Berkel 1item
  56. Berti 3items
  57. BlachHawk Blades 10items
  58. Blackjack 10items
  59. Blade Magazine 12items
  60. BladeTech 1item
  61. Bradley 5items
  62. Brian Tighe and Friends 4items
  63. Browning 2items
  64. Brusletto 1item
  65. Buck 28items
  66. Carl Schlieper 6items
  67. Case 13items
  68. Cesare Tonelli 7items
  69. Chris Reeve Knives 58items
  70. Citadel 32items
  71. Combative Edge 5items
  72. Corey Sar Fox 2items
  73. Crusader Forge 1item
  74. David 4items
  75. DMT 4items
  76. Douk Douk 5items
  77. Dovo 2items
  78. Down Under Knives 10items
  79. DPX Gear 8items
  80. DuStar 1item
  81. Eickhorn 9items
  82. Elite Tactical 2items
  83. Emerson 12items
  84. Enzo 20items
  85. EOS 13items
  86. Esee Knives 16items
  87. Estas 1item
  88. F. Pachì 1item
  89. Fantoni 40items
  90. Forge de Laguiole 6items
  91. Freeman Outdoor Gear 11items
  92. G. Sakai 4items
  93. Gary Bradburn 1item
  94. Gatco 2items
  95. Gerber 44items
  96. Gilles 6items
  97. Glock knives 7items
  98. Guardian Tactical 20items
  99. Halcon Spain 3items
  100. Hardcore Hardware 2items
  101. Heckler and Kock 1item
  102. Helle 15items
  103. Herold 6items
  104. Hikari Japan 6items
  105. Hoffner Knives 18items
  106. Hogue Knives 10items
  107. Hollywood Collectibles Group 11items
  108. HTM Knives 1item
  109. Ibberson 1item
  110. Indiana Jones 1item
  111. Jaguar Knives 8items
  112. JetBeam 1item
  113. Kanekoma 5items
  114. Kanetsune 2items
  115. Karhunkynsi Puukko 2items
  116. Kasumi 2items
  117. Kauhavan Puukkopaja 3items
  118. Kershaw 48items
  119. Kiku Knives 13items
  120. Koji Hara 3items
  121. La Cantina 10items
  122. La Passion des Couteaux 1item
  123. Lame D'autore 40items
  124. Lansky 4items
  125. Linder 22items
  126. Lodge 1item
  127. Lone Wolf 9items
  128. Mac 11items
  129. Master Cutlery 4items
  130. Master of Defense 3items
  131. Maxpedition 3items
  132. MedFordKnives 47items
  133. Mercury 3items
  134. Microtech 14items
  135. Mil Tac 4items
  136. Minosharp 4items
  137. Mission 4items
  138. MKM 84items
  139. Mora Kniv 14items
  140. Muela 3items
  141. Nepal Kukri 44items
  142. Nieto 5items
  143. Nilte 2items
  144. No Brand 43items
  145. Norton 1item
  146. Olamic Cutlery 5items
  147. Ontario 49items
  148. Original Usa 15items
  149. Othello 10items
  150. Piscitelli 2items
  151. Pohl Force 76items
  152. Puma 1item
  153. Quartermaster 19items
  154. Randall 3items
  155. Red Claw 4items
  156. Remington 1item
  157. RH Preyda 8items
  158. Rick Hinderer Knives 11items
  159. Rivista Coltelli 38items
  160. Rockstead 27items
  161. Sandrin Knives 7items
  162. Sanelli Ambrogio 4items
  163. Santa Fe 2items
  164. Saturn Knives 2items
  165. Sergio Consoli 2items
  166. Smith and Wesson 9items
  167. SOG 43items
  168. Spartan Blades 54items
  169. Stangen 1item
  170. Stedemon Knife Co. 2items
  171. Steel Will 2items
  172. Steel X 1item
  173. Strider 25items
  174. Taidea 2items
  175. Takefu knives 5items
  176. Tasmanian Tiger 3items
  177. TB Outdoor 11items
  178. Timberline 1item
  179. Tops Knives 88items
  180. TRC Knives 7items
  181. Tridentum 3items
  182. Ulticlip 3items
  183. United Cutlery 26items
  184. Valyrian Steel 1item
  185. Waffentechnik 5items
  186. WanderTactical 300items
  187. We Knife Co. 3items
  188. White River Knife and Tool 28items
  189. Wildsteer 11items
  190. Windlass 4items
  191. Work Sharp 3items
Less
Stock
  1. In Stock 15items
  2. Out of Stock 89items
Rating
  1. 5
    22items
  2. 4
    & up
    47items
Set Ascending Direction

Items 1-48 of 104

Page
  1. Mcusta - Bamboo knife brown pakka wood - SPG2 Powder Steel - MC-0145G - knife

    Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

    Intended use: sports / collection

    Type of production: industrial cutting - handcrafted assembly and finishing
    Blade: SPG2 61 / 62HRC
    Blade treatment: -
    Production Lama: Japan
    Handle: Damascus steel and pakka wood
    Blade length: 70mm.
    Blade thickness: 3mm.
    Closed length: 96mm.
    Total length: 166mm.
    Balancing: -
    Weight: 96g.
    Closure: Liner Lock
    Clip: -
    Sheath: cordura
    Note: -

    MC-0145G
    €254.10
    Only 1 left
    Only 1 left
    Out of stock
  2. Mcusta - Take knife VG10 Damascus - Shinra Series - Stamina Wood - MC-0075D - knife

    Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

    Intended use: sports / collection / gentlemen

    Type of production: industrial cutting - craft assembly and finishing
    Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
    Production Lama: Japan
    Handle: Stamina Wood
    Blade length: 65mm.
    Blade thickness: 3mm.
    Length closed: 95mm.
    Total length: 164mm.
    Balancing: -
    Weight: 58g.
    Closure: Liner Lock
    Clip: -
    Sheath: in fabric
    Note: -

    MC-0075D
    €184.43
    Only 2 left
    Only 2 left
    Rating:
    100%
    5
  3. Mcusta - Tsuchi Damascus knife - Shinra Stamina Wood - MC-0078D - knife

    Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

    Intended use: sports / collection

    Type of production: industrial cutting - craft assembly and finishing
    Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
    Production Lama: Japan
    Handle: Stamina Wood
    Blade length: 70mm.
    Blade thickness: 3mm.
    Length closed: 95mm.
    Total length: 167mm.
    Balancing: -
    Weight: 66g.
    Closure: Liner Lock
    Clip: -
    Sheath: fabric bag
    Note: -

    MC-0078D
    €151.64
    Only 1 left
    Only 1 left
  4. Mcusta - Katana knife series - MC-0044C - Black / Green - knife

    Mcusta - Series Katana - MC-0041C - knife

    Intended use: sports / collection

    Type of production: industrial cutting - assembly and handcrafted finishes
    Production Lama: Japan
    Blade: laminated steel with sharp VG-10 to 59/60 HRC
    Handle: Aluminum
    Blade length: 80mm.
    Blade thickness: 3mm.
    Closed Length: 110mm.
    Overall length: 194mm.
    Thick when closed: 14mm.
    Weight: 96g.
    Lock: Liner Lock
    Clip: Stainless Steel
    Packaging: cardboard box with logos Mcusta
    Notes: -

    MC-0044C
    €159.84
    Only 1 left
    Only 1 left
    Rating:
    93%
    4.7
  5. Mcusta - Katana knife series - MC-0042C - Blue / Orange - knife

    Mcusta - Series Katana - MC-0041C - knife

    Intended use: sports / collection

    Type of production: industrial cutting - assembly and handcrafted finishes
    Production Lama: Japan
    Blade: laminated steel  with VG-10 edge hardened to 59/60 HRC
    Handle: Aluminum
    Blade length: 80mm.
    Blade thickness: 3mm.
    Closed Length: 110mm.
    Overall length: 194mm.
    Thick when closed: 14mm.
    Weight: 96g.
    Lock: Liner Lock
    Clip: Stainless Steel
    Packaging: cardboard box with logos Mcusta
    Notes: -

    MC-0042C
    €159.84
    Only 2 left
    Only 2 left
    Rating:
    100%
    5
  6. Mcusta - Masamune Dates MC-0186D knife - VG10 Damascus SanMai - Sengoku Series - knife

    Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

    Intended use: sports / collection

    Type of production: industrial cutting - craft assembly and finishing
    Production Lama: Japan
    Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
    Handle: Micarta
    Blade length: 93mm.
    Blade thickness: 3mm.
    Length closed: 117mm.
    Total length: 210mm.
    Thick when closed: 17.5mm.
    Weight: 120g.
    Closure: Liner Lock
    Clip: in stainless steel
    Packaging: cardboard box with Mcusta logos
    Notes: -

    MC-0186D
    €172.13
    Only 2 left
    Only 2 left
  7. Mcusta - MC-0191C Slip Joint Knife Black / Red Wood - knife

    Destination of use: sport / collection

    Type of production: industrial cutting - assembly and artisan finishes
    Lama production: Japan
    Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
    Handle: wood
    Blade length: 85mm.
    Blade thickness: 3mm.
    Length closed: 110mm.
    Total length: 195mm.
    Thick when closed: 12mm.
    Weight: 78g.
    Closure: Joint Slip
    Clip: -
    Packaging: cardboard box with Mcusta logos with fabric sheath
    Note: -

    MC-0191C
    €127.05
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  8. Mcusta - MC-193C Slip Joint Knife Black / Green - knife

    Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

    Destination of use: sport / collection

    Type of production: industrial cutting - assembly and artisan finishes
    Lama production: Japan
    Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
    Handle: wood
    Blade length: 85mm.
    Blade thickness: 3mm.
    Length closed: 110mm.
    Total length: 195mm.
    Thick when closed: 12mm.
    Weight: 78g.
    Closure: Joint Slip
    Clip: -
    Packaging: cardboard box with Mcusta logos with fabric sheath
    Note: -

    MC-193C
    €127.05
    Only 2 left
    Only 2 left
    Rating:
    93%
    4.7
  9. Mcusta-Zanmai - Whetstone - Grana 400 - accessories knives

    Mcusta-Zanmai - Whetstone - Grana 400 - accessories knives

    Stone origianale Japanese synthetic water sharpening coarse (400).
    Dimensions 205x76x35 mm.

    Quality: high

    ZAN400
    €39.34
    Only 2 left
    Only 2 left
    Rating:
    100%
    5
  10. Mcusta-Zanmai - Whetstone - Grana 8000 - accessories knives

    Mcusta-Zanmai - Whetstone - Grana 8000 - accessories knives

    Stone origianale Japanese synthetic water to sharpen fine-grained (8000).
    Dimensions 205x76x25 mm.

    Quality: high

    ZAN8000
    €61.48
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  11. Mcusta - Rikyu Tea Ceremony Damascus - MC-0184D - knife

    Cutlery Collini is the official distributor for Italy of Japanese knives Mcusta

    Intended use: sports / collection

    Type of production: industrial cutting - assembly and handcrafted finishes
    Production Lama: Japan
    Blade: Stainless sanmai with sharp steel VG-10 to 59/60 HRC and cheeks outside Damascus nickel to 33 layers
    Handle: Micarta
    Blade length: 93mm.
    Blade thickness: 3mm.
    Closed Length: 117mm.
    Overall length: 210mm.
    Thick when closed: 17.5mm.
    Weight: 120g.
    Lock: Liner Lock
    Clip: Stainless Steel
    Packaging: cardboard box with logos Mcusta
    Note: Cordura sheath and leather

    12016
    €176.23
    Only 1 left
    Only 1 left
  12. Mcusta - Nami Small Damascus Japan - MC-0111D - knife

    Mcusta - Nami Small Damascus Japan - MC-0111D - knife

    Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta

    Intended Use: Sport / collection

    Type of production: industrial cutting - assembly and handcrafted finishes
    Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
    Blade Production: Japan
    Handle: steel hammered
    Blade length: 65mm.
    Blade Thickness: 3mm.
    Closed Length: 95mm.
    Overall length: 160mm.
    Balancing: -
    Weight: 74g.
    Lock: Liner Lock
    Clip: -
    Sheath: -
    Notes: -

    MC-0111D
    €122.95
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  13. Mcusta - Take VG10 Damascus - Shinra Series - Black PakkaWood - MC-0076DP - knife

    Intended use: sport / collection / gentlemen

    Type of production: industrial cutting - craft assembly and finishing
    Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
    Production Lama: Japan
    Handle: Pakkawood wood, worked bamboo style
    Blade length: 65mm.
    Blade thickness: 3mm.
    Length closed: 95mm.
    Total length: 164mm.
    Balancing: -
    Weight: 58g.
    Closure: Liner Lock
    Clip: -
    Sheath: in fabric
    Note: -

    MC-0076DP
    €172.13
    Only 2 left
    Only 2 left
  14. Mcusta - Shadow - MC-114BD - knife

    Intended use: sports / collection

    Type of production: industrial cutting - craft assembly and finishing
    Production Lama: Japan
    Blade: in damask laminated and hammered stainless steel with cutting edge in VG-10 at 59 / 60HRC
    Handle: Stainless Steel
    Blade length: 85mm.
    Blade thickness: 3mm.
    Length closed: 112mm.
    Total length: 192mm.
    Thick when closed: 8mm.
    Weight: 114g.
    Closure: Frame Lock
    Clip: in stainless steel
    Packaging: cardboard box with Mcusta logos
    Note: -

    MC-0114BD
    €151.64
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  15. Linder - Streich-Riemen - Leather Razor Strop - 888003

    Essential for maintaining sharpness and revive the thread of razors free hand in this leather strop made in Germany allows you to instantly adjust the tension by screwing / unscrewing the comfortable wooden handle.

    Brand: Linder / Streich-Riemen

    Materials: wood handle, system voltage, metal, leather strop with one side coated with abrasive paste red
    Strop Size: Length 183mm. - Width 40mm.
    Overall length: 335mm.

    10174
    €36.88
    Only 6 left
    Only 6 left
    Rating:
    96%
    4.8
  16. Mcusta - Elite Tactility Micarta knife VG10 - MC-00121 knife

    Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

    Intended use: sports / collection

    Type of production: industrial cutting - craft assembly and finishing
    Production Lama: Japan
    Blade: VG-10 stainless steel at 59 / 60HRC
    Handle: Micarta
    Blade length: 95mm.
    Blade thickness: 3mm.
    Length closed: 115mm.
    Total length: 207mm.
    Thick when closed: 17.5mm.
    Weight: 100g.
    Closure: Liner Lock
    Clip: in stainless steel
    Packaging: cardboard box with Mcusta logos
    Note: -

    MC-00121
    €138.52
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
    Out of stock
  17. Mcusta - Yoroi Damasco - 37D - knife

    Intended Use: sporivo / collection

    Type of production: industrial cutting - assembly and handcrafted finishes
    Blade: Stainless steel sanmai with sharp VG-10 59/60HRC cheeks and stainless steel external
    Treatment Lama: -
    Blade Production: Japan
    Handle: damascus steel
    Blade length: 70mm.
    Blade Thickness: 3mm.
    Closed Length: 90mm.
    Total length: 162mm.
    Balance: -
    Weight: 86g.
    Lock: Liner Lock
    Clip: -
    Sheath: -
    Notes: -

    3984
    €233.61
    Only 1 left
    Only 1 left
    Rating:
    93%
    4.7
  18. Rockstead - HIGO II X-FCF - ZDP-189 & Dark Matter Gold Carbon Fiber - folding knife

    Higo is one of the most beloved models for Rockstead Knives fans around the world, and HIGOⅡX, with a custom Dark Matter Gold (DMG) carbon fiber coating and a titanium back layer, is one more step in the pursuit of perfection. The blade is made of ZDP189 super stainless steel and features a unique convexity with gradually reduced angle (30 degrees at the middle and 24 degrees at the tip). The variable blade angle is the result of Rockstead's long quest for superior sharpness and cutting ability.


    Blade: ZDP-189 stainless steel at 66.7HRC
    Handle: anodized titanium and Dark Matter Gold carbon fiber
    Blade length: 89mm.
    Blade thickness: 3.2mm.
    Total length: 216mm.
    Weight: 138g.
    Closure: Frame Lock with SKD11 casement at 61HRC
    Clip: made of 402J2 steel at 48HRC
    Notes: Accompanied by warranty certificate with full technical specifications

    RO-HIGIIX-ZDPDMG
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  19. Rockstead - Shin - Clad ZDP189 & Aluminum and Samekawa - folding knife

    With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.

    Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.

    Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
    Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
    Blade length: 95 mm.
    Blade thickness: 4 mm.
    Overall length: 210 mm.
    Weight: 145 g.
    Lock: Liner Lock steel in 52HRC 402J2
    Clip: Steel 402J2 to 52HRC
    Notes: Accompanied by a certificate of guarantee with the technical specifications.

    RO-SHIN-ZDP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  20. Rockstead - Hizen - DLC YXR7 & Duralumin - Folding Knife

    With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
    Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.


    Intended use: Collection / Sports

    Type of production: Midtech
    Country of production: Sakai - Japan
    Blade: in Hitachi YXR7 steel at 64HRC
    Blade treatment: Black DLC mirror
    Handle: A7075 Duralumin with Hv400 hardness anodizing
    Blade length: 70mm.
    Blade thickness: 3.3mm.
    Length closed: 104mm.
    Total length: 176mm.
    Thick when closed: 11.4mm.
    Weight: 74g.
    Opening: through ambidextrous pin
    Washers: in steel
    Closure: FrameLock with wing in SKD11 at 61HRC
    Clip: removable, in 420J2 stainless steel of 1mm. with PVD treatment
    Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
    Notes: -

    RO-HIZ-DLC
    €750.00
    Only 0 left
    Only 0 left
    Out of stock
  21. Rockstead - Hizen - ZDP-189 & Duralumin - Folding Knife made in Japan

    Blade: stainless steel ZDP-189 to 67.2HRC
    Handle: Duralumin A2024 with anodized surface to HV400
    Blade length: 73 mm.
    Blade Thickness: 3.5 mm.
    Overall length: 176 mm.
    Weight: 172 g.
    Lock: Frame Lock with a swing in SKD11 61HRC
    Clip: Steel 402J2 to 48HRC
    Notes: Accompanied by a certificate of guarantee with the technical specifications.

    RO-HIZ-ZDP189
    €0.00
    Only -50 left
    Only -50 left
    Rating:
    100%
    5
    Out of stock
  22. Rockstead - 2010 Higo-MH-DLC Serial #303 - YXR7 HPC & Micarta - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: In very good condition
    * Commercially available Discontinued
    * Sharpening: Factory
    * Marks on blade: -
    * Marks on handle: - -
    * Box: marketed in silk pouch.
    * Scabbard: Leather, belt, original, with a few small marks given by time.
    * Manuals, Certificates and Warranties: present.
    * Checked and Certified by our in-house laboratory



    The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.

    Country of manufacture: Japan
    Type of manufacture: midtech
    Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
    Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
    Blade length: 90mm.
    Blade thickness: 3.5mm.
    Total length: 216mm.
    Weight: 139g.
    Closure: Liner Lock
    Clip: stainless steel
    Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

    RO-HIMHDLC-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  23. Rockstead - 2010 Higo-ST Serial #005 - YR7 HPC & Duralumin - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Like new
    * Commercially available Discontinued
    * Sharpening: Factory
    * Marks on blade: None
    * Marks on handle: None
    * Box: Present
    * Scabbard: -
    * Manuals, Certificates and Warranties: Present
    * Checked and Certified by our in-house laboratory.


    The best industrial knives currently in production are marketed under the Rockstead brand. Created by Katsumi Kitano, who has been making quality knives for more than 20 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in the level of innovation for the materials used and construction techniques.

    Country of production: Japan
    Type of production: midtech
    Blade: Hitachi YXR7 steel at 64.8HRC with 3micron HPC coverage and hardness of Hv1800
    Handle: Duralumin A2024 with surface anodizing and hardness of Hv400
    Blade length: 90mm.
    Blade thickness: 3.5mm.
    Total length: 215mm.
    Weight: 130g.
    Closure: Frame Lock with SKD11 casement at 61HRC
    Clip: made of 402J2 steel at 48HRC
    Notes: Serial number 005 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

    RO-HISTHPC-CP
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  24. Rockstead - CHI ZDP - Shinogi Zukuri Clad Steel SanMai ZDP189 - knife made in Japan

    Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.

    Intended Use: Collection/Sportsman

    Type of production: Midtech
    Country of manufacture: Sakai - Japan
    Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
    Blade treatment: mirror polish
    Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
    Blade length: 82mm.
    Blade thickness: 3.7mm.
    Length closed: 111mm.
    Total length: 189mm.
    Thickness when closed: 16.2mm.
    Weight: 133g.
    Opening: via ambidextrous pin
    Washers: steel
    Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
    Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
    Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
    Notes: Shinogi Zukuri type blade sharpening

    R-CHIZDP
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  25. Mcusta - Platinum Label Blade Show 2022 Limited Edition - MCPLBS-22 - knife

    Extremely limited edition Platinum Label series folding knife with Mokume damascus blade and heads produced in only 20 examples each with a different coloration of the wood briar. Each specimen is therefore unique and differs from the previous one.

     


    Intended use: collection

    Type of production: industrial cutting - craftsmanship, assembly and finishing
    Country of production: Seki - Japan
    Blade: made of Mokume stainless steel with VG-10 cutting edge, forged with rainbow damascus rolling, achieved through layers of stainless steel, copper and brass and hammered through Tsuchime technique
    Handle: made of Mokume stainless damask steel and wood briar
    Blade length: 80mm.
    Blade thickness: 3mm.
    Length closed: 110mm.
    Total length: 195mm.
    Thickness when closed: 14mm.
    Weight: 208g.
    Closure: Liner Lock
    Clip: handcrafted, removable and reversible, hammered stainless steel
    Packaging: wooden box with Mcusta logos
    Notes: Special and Limited Edition made in only 20 pieces for the Blade Show in Atlanta 2022

    MC-PLBS22
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  26. Mcusta - Shinari Shinra Maxima knife - SPG2 - PRIVATE COLLECTION - Green Pakka Wood - MC-0203G - knife

    Knife withdrawn from a private collection in excellent condition, uniquely has a small imperfection on the wood at the base of the handle (visible in the close up of the photos) - Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.

    The SHINRA MAXIMA series uses the sintered and cryogenically hardened Japanese steel SPG2 in 3-layer laminate, one of the best ever produced in Japan

    Intended use: sports / collection

    Type of production: industrial cutting - handcrafted assembly and finishing
    Production Lama: Japan
    Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
    Handle: Pakka Wood
    Blade length: 95mm.
    Blade thickness: 3mm.
    Closed length: 115mm.
    Total length: 207mm.
    Thick when closed: 17.5mm.
    Weight: 100g.
    Closure: Liner Lock
    Clip: in stainless steel
    Packaging: cardboard box with Mcusta logos
    Note: -

    For more information on the steel used, you can visit the website: www.collinisteel.com

    AP-MC-0203G
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  27. Mcusta - Petit Damascus knife - VG10 steel - Micarta Blue and Black - MC-0212D - knife

    Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives

    Intended use: sports / collection

    Type of production: industrial cutting - handcrafted assembly and finishing
    Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
    Production Lama: Japan
    Handle: Micarta
    Blade length: 45mm.
    Blade thickness: 3mm.
    Closed length: 70mm.
    Total length: 118mm.
    Balancing: -
    Weight: 44g.
    Closure: Liner Lock
    Clip: in deep pocket steel
    Sheath:
    Note: -

    MC-0212D
    €118.85
    Only 0 left
    Only 0 left
    Rating:
    87%
    4.4
    Out of stock
  28. Mcusta - Petit Damascus knife - VG10 steel - Micarta Orange and Black - MC-0211D - knife

    Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives

    Intended use: sports / collection

    Type of production: industrial cutting - handcrafted assembly and finishing
    Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
    Production Lama: Japan
    Handle: Micarta
    Blade length: 45mm.
    Blade thickness: 3mm.
    Closed length: 70mm.
    Total length: 118mm.
    Balancing: -
    Weight: 44g.
    Closure: Liner Lock
    Clip: in deep pocket steel
    Sheath:
    Note: -

    MC-0211D
    €118.85
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  29. Mcusta - Yatagarasu collection knife - Limited Edition - MCSY-001 - knife

    Extremely limited edition Yatagarasu MCUSTA folding knife of the Shinwa series, with Mokume blade and produced in only 100 pieces.

    Yatagarasu, in Japanese culture, is a three-legged crow symbol of driving owned by the Sun goddess Amaterasu. Yatagarasu appears in ancient Japanese documents, such as Kojiki (古 事 記), in which it is also said that he fought and killed a beast intending to devour the Sun, and that he is also the protector of the emperor Jimmu.
    On many occasions, in Japanese art this creature is represented with three legs, although in Kojiki it is never said that the Yatagarasu has more than two. Today, the three-legged version of the Yatagarasu is used as a symbol of the football federation of Japan.

    Intended use: collection

    Type of production: industrial cutting - craftsmanship, assembly and finishes
    Lama production: Japan
    Blade: stainless steel Mokume Damascus - Aogami (blue steel) forged with lamination of rainbow Damascus, obtained thanks to layers of stainless steel, copper and brass and with black hammering through the Tsuchime technique
    Handle: in stainless damask with dark purple corian insert and copper and gold inlays
    Blade length: 80mm.
    Blade thickness: 3mm.
    Length closed: 110mm.
    Total length: 195mm.
    Thick when closed: 14mm.
    Weight: 141g.
    Closure: Liner Lock
    Clip: -
    Packaging: wooden box with Mcusta logos
    Notes: limited edition 100 pieces

    For more information on the steel used you can view the site: www.collinisteel.com

    MCSY-001
    €614.75
    Only -50 left
    Only -50 left
    Out of stock
  30. Mcusta - Takeri Shinra Maxima knife - SPG2 Powder Steel - Damascius - MC-0202G - knife

    Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

    The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

    Intended use: sports / collection

    Type of production: industrial cut - assembly and handmade finishes
    Lama production: Japan
    Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
    Handle: Damascus
    Blade length: 90mm.
    Blade thickness: 3mm.
    Length closed: 117mm.
    Total length: 211mm.
    Thick when closed: 17.5mm.
    Weight: 170g.
    Closure: Liner Lock
    Clip: stainless steel
    Packaging: cardboard box with Mcusta logos
    Note: -

    For more information on the steel used you can view the site: www.collinisteel.com

    MC-0202G
    €323.77
    Only 0 left
    Only 0 left
    Out of stock
  31. Mcusta - Shinari Shinra Maxima knife - SPG2 Powder Steel - Green Pakka Wood - MC-0203G - knife

    Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

    The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

    Intended use: sports / collection

    Type of production: industrial cut - assembly and handmade finishes
    Lama production: Japan
    Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
    Handle: Pakka wood
    Blade length: 95mm.
    Blade thickness: 3mm.
    Length closed: 115mm.
    Total length: 207mm.
    Thick when closed: 17.5mm.
    Weight: 100g
    Closure: Liner Lock
    Clip: stainless steel
    Packaging: cardboard box with Mcusta logos
    Note: -

    For more information on the steel used you can view the site: www.collinisteel.com

    MC-0203G
    €311.48
    Only 0 left
    Only 0 left
    Out of stock
  32. Mcusta - Minagi Shinra Maxima knife - SPG2 Powder Steel - Blue Micarta - MC-0201G - knife

    Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

    The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

    Intended use: sports / collection

    Type of production: industrial cut - assembly and handmade finishes
    Lama production: Japan
    Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
    Handle: Micarta
    Blade length: 90mm.
    Blade thickness: 3mm.
    Length closed: 117mm.
    Total length: 211mm.
    Thick when closed: 17.5mm.
    Weight: 105g.
    Closure: Liner Lock
    Clip: stainless steel
    Packaging: cardboard box with Mcusta logos
    Note: -

    For more information on the steel used you can view the site: www.collinisteel.com

    MC-0201G
    €303.28
    Only 0 left
    Only 0 left
    Rating:
    93%
    4.7
    Out of stock
  33. Mcusta - Bamboo knife black pakka wood - SPG2 Powder Steel - MC-0146G - knife

    Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

    Intended use: dirty / collection

    Type of production: industrial cut - assembly and handmade finishes
    Blade: SPG2 61 / 62HRC
    Blade treatment: -
    Lama production: Japan
    Handle: damask steel and pakka wood
    Blade length: 70mm.
    Blade thickness: 3mm.
    Length closed: 96mm.
    Total length: 166mm.
    Balancing: -
    Weight: 96g.
    Closure: Liner Lock
    Clip: -
    Sheath: cordura
    Note: -

    MC-0146G
    €245.90
    Only 0 left
    Only 0 left
    Out of stock
  34. Rockstead - Higo II F-HTI-ZDP - Titanium ZDP-189 - knife

    With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.

    Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and tightness of the thread and in innovation for the materials used and for construction techniques.


    Intended use: Collection / Sports

    Type of production: Midtech
    Country of production: Sakai - Japan
    Blade: ZDP189 stainless steel hardened to 66.5HRC
    Blade treatment: mirror polished
    Handle: titanium
    Blade length: 90mm.
    Blade thickness: 3mm.
    Closed length: 120mm.
    Total length: 216mm.
    Thick when closed: 12.2mm.
    Weight: 136g.
    Opening: through ambidextrous pin
    Washers: in brass
    Closure: FrameLock with wing in SKD11 at 61HRC
    Clip: removable, in 420J2 stainless steel with PVD treatment
    Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
    Notes: Serial number # 096 - Date of production 05 July 2019

    HIGOIIHTIZ
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  35. Mcusta - Tsuchi Damascus knife - Shinra Iron Wood - MC-0077DI - knife

    Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

    Intended use: sports / collection

    Type of production: industrial cutting - craft assembly and finishing
    Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
    Production Lama: Japan
    Handle: Iron Wood
    Blade length: 70mm.
    Blade thickness: 3mm.
    Length closed: 95mm.
    Total length: 167mm.
    Balancing: -
    Weight: 66g.
    Closure: Liner Lock
    Clip: -
    Sheath: fabric bag
    Note: -

    MC-0077DI
    €163.93
    Only 0 left
    Only 0 left
    Rating:
    80%
    4
    Out of stock
  36. Mcusta - Tsuchi Damascus knife - MC-0114D - Forge Series - knife

    Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

    Intended use: sports / collection

    Type of production: industrial cutting - craft assembly and finishing
    Production Lama: Japan
    Blade: in damask laminated and hammered stainless steel with cutting edge in VG-10 at 59 / 60HRC
    Handle: Stainless Steel
    Blade length: 85mm.
    Blade thickness: 3mm.
    Length closed: 112mm.
    Total length: 192mm.
    Thick when closed: 8mm.
    Weight: 114g.
    Closure: Frame Lock
    Clip: in stainless steel
    Packaging: cardboard box with Mcusta logos
    Note: -

    MC-0114D
    €151.64
    Only 0 left
    Only 0 left
    Out of stock
  37. Mcusta - Elite Tactility knife - SPG2 Powder Steel - Iron Wood - MC-0125G - knife

    Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

    The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

    Intended use: sports / collection

    Type of production: industrial cutting - craft assembly and finishing
    Production Lama: Japan
    Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
    Handle: Iron Wood
    Blade length: 95mm.
    Blade thickness: 3mm.
    Length closed: 115mm.
    Total length: 207mm.
    Thick when closed: 17.5mm.
    Weight: 100g.
    Closure: Liner Lock
    Clip: in stainless steel
    Packaging: cardboard box with Mcusta logos
    Note: -

    For more information on the steel used, you can view the site: www.collinisteel.com

    MC-0125G
    €188.52
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  38. Mcusta - Elite Tactility knife - SPG2 Powder Steel - Corian - MC-0126G - knife

    Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

    The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

    Intended use: sports / collection

    Type of production: industrial cutting - craft assembly and finishing
    Production Lama: Japan
    Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
    Handle: Corian
    Blade length: 95mm.
    Blade thickness: 3mm.
    Length closed: 115mm.
    Total length: 207mm.
    Thick when closed: 17.5mm.
    Weight: 100g.
    Closure: Liner Lock
    Clip: in stainless steel
    Packaging: cardboard box with Mcusta logos
    Note: -

    For more information on the steel used, you can view the site: www.collinisteel.com

    MC-0126G
    €192.62
    Only 0 left
    Only 0 left
    Rating:
    90%
    4.5
    Out of stock
  39. Mcusta - Elite Tactility knife - SPG2 Steel Powder - Micarta Series - MC-0121G - knife

    Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

    The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

    Intended use: sports / collection

    Type of production: industrial cutting - craft assembly and finishing
    Production Lama: Japan
    Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
    Handle: Micarta
    Blade length: 95mm.
    Blade thickness: 3mm.
    Length closed: 115mm.
    Total length: 207mm.
    Thick when closed: 17.5mm.
    Weight: 100g.
    Closure: Liner Lock
    Clip: in stainless steel
    Packaging: cardboard box with Mcusta logos
    Note: -

    For more information on the steel used, you can view the site: www.collinisteel.com

    MC-0121G
    €188.52
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  40. Mcusta - Toyotomi Hideyoshi MC-0182G knife - SPG2 Powder Steel - Sengoku Series - knife

    Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

    The Sengoku series uses 3-layer SPG2 powder steel and cryogenically hardened Japanese steel, one of the best ever produced in Japan

    Intended use: sports / collection

    Type of production: industrial cutting - craft assembly and finishing
    Production Lama: Japan
    Blade: stainless steel SPG-2 at 61 / 62HRC
    Handle: Pakka Wood
    Blade length: 93mm.
    Blade thickness: 3mm.
    Length closed: 117mm.
    Total length: 210mm.
    Thick when closed: 17.5mm.
    Weight: 120g.
    Closure: Liner Lock
    Clip: -
    Packaging: cardboard box with Mcusta logos
    Notes: cordura sheath and leather

    MC-0182G
    €180.33
    Only 0 left
    Only 0 left
    Out of stock
  41. Mcusta - Oda Nobunaga MC-0181G - SPG2 Powder Steel - Sengoku Series - knife

    Intended use: sporting/collection

    Type of production: industrial cut - handcrafted assembling and finishing
    Blade production: Japan
    Blade: SPG-2 stainless steel at 61/62HRC in three layers San Mai laminate
    Handle: Micarta
    Blade length: 93mm.
    Blade thickness: 3mm.
    Length closed: 117mm.
    Total length: 210mm.
    Thickness when closed: 17.5mm.
    Weight: 120g.
    Closure: Liner Lock
    Clip: -
    Package: cardboard box with Mcusta logos
    Notes: Cordura and leather sheath

    MC-0181G
    €180.33
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  42. Rockstead - Shin knife DLC - YXR7 - knife

    This knife blade is convex on both sides in the tradition of the highly praised Japanese sword. This shape is both sharp and strong, and can still slice cleanly through a sheet of paper even after the punishment of chopping and cutting through dried bamboo. Using this special blade shape is an excellent way of allowing an edge to be thick without sacrificing any of its sharpness. This knife is of preeminent sharpness. This is a durable knife with strong cutting capabilities that will last for a long time. Even when used for rigorous cutting, the blade will not bite or catch thanks to its convex shape. Other knives will often bite or catch, and may acquire nicks if pulled out suddenly.

    Blade: XR-7 steel at 64.3 HRC with DLC treatment
    Handle: Same (real breed leather) and aeronautical aluminum with Hv400 black alumite treatment
    Blade length: 95 mm.
    Blade thickness: 4 mm.
    Total length: 210 mm.
    Weight: 145 g.
    Closing: Liner Lock in 402J2 steel at 52HRC
    Clip: in 402J2 steel at 52HRC
    Notes: Accompanied by a warranty certificate with technical specifications.

    RS-SHIN-B
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  43. Rockstead - Higo II X-CF-ZDP - Carbon Fiber ZDP-189 - knife

    With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.

    Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.


    Intended use: Collection / Sports

    Type of production: Midtech
    Country of production: Sakai - Japan
    Blade: ZDP189 stainless steel hardened to 66.4HRC
    Blade treatment: mirror polished
    Handle: anodised titanium and carbon fiber
    Blade length: 89mm.
    Blade thickness: 3mm.
    Closed length: 120mm.
    Total length: 216mm.
    Thick when closed: 15.8mm.
    Weight: 133g.
    Opening: through ambidextrous pin
    Washers: in steel
    Closure: FrameLock with wing in SKD11 at 61HRC
    Clip: removable, in 420J2 stainless steel with PVD treatment
    Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
    Notes: Serial number # 028 - Date of production April 23, 2019

    HIGOIIXCF
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  44. Rockstead - Chou HPC - Black Silk - neck knife

    With the Rockstead brand, of Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently being marketed.

    Created by Katsumi Kitano, who has been producing quality knives for over 20 years, to the extent that they have been awarded the highest recognition among the artisanal cutlers in Japan, they prove to be exceptional both in cutting, penetration and thread strength and in terms of innovation for the materials used and for construction techniques.

    Blade: Hitachi YXR7 65HRC steel with HPC titanium cover
    Handle: interweaving in silk tied by hand
    Blade length: 45 mm.
    Blade thickness: 4 mm.
    Total length: 120 mm.
    Weight: 60 g.
    Sheath: neck, in Kydex
    Notes: Accompanied by silk bag and certificate of guarantee with technical specifications.

    4069BLACK
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  45. Mcusta - MC-192C Slip Joint Knife Black / Yellow - knife

    Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

    Destination of use: sport / collection

    Type of production: industrial cutting - assembly and artisan finishes
    Lama production: Japan
    Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
    Handle: wood
    Blade length: 85mm.
    Blade thickness: 3mm.
    Length closed: 110mm.
    Total length: 195mm.
    Thick when closed: 12mm.
    Weight: 78g.
    Closure: Joint Slip
    Clip: -
    Packaging: cardboard box with Mcusta logos with fabric sheath
    Note: -

    MC-192C
    €127.05
    Only 0 left
    Only 0 left
    Out of stock
  46. Rockstead - TEI DLC - 65hrc - knife collection

    This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.

    Full length: 213.00 mm
    Blade length: 93.00 mm
    Weight: 155 g
    Thickness: 3.70 mm
    Material: YXR7
    Hardness: HRC65
    Blade geometry: Honzukuri
    Hard coating: DLC
    Knives type: Folder

    RO-TEI
    €0.00
    Only -20 left
    Only -20 left
    Rating:
    100%
    5
    Out of stock
  47. Rockstead - Chou HPC Ironwood - Neck Knife - Knife

    With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.

    Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.


    Use: utility / Neck Knife

    Production Country: Japan
    Blade: stainless Hitachi YXR7 to 65HRC
    Finish: HPC titanium
    Handle: Ironwood
    Blade length: 45 mm.
    Blade thickness: 4 mm.
    Overall length: 120 mm.
    Weight: 60 g.
    Sheath: neck, Kydex thermoformed
    Notes: Accompanied by a certificate of guarantee with technical specifications

    4069IW
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  48. Mcusta - Sengoku Damascus - MC-0182D Toyotomi Hideyoshi - knife

    Intended Use: sport / collection

    Type of production: Industrial cutting - assembly and handcrafted finishes
    Production Lama: Japan
    Blade: stainless steel sanmai with sharp VG-10 to 59 / 60HRC and External cheeks damask nickel to 33 layers
    Handle: Micarta
    Blade length: 93mm.
    Blade thickness: 3mm.
    Closed Length: 117mm.
    Overall length: 210mm.
    Thick when closed: 17.5mm.
    Weight: 120g.
    Lock: Liner Lock
    Clips: stainless steel
    Packaging: cardboard box with logos Mcusta
    Notes: Cordura sheath and leather

    MC-0182D
    €168.03
    Only 0 left
    Only 0 left
    Out of stock
Set Ascending Direction

Items 1-48 of 104

Page




ecommerce sicuro