Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Intended use: tactical / military

Type of production: industrial
Country of production: Taiwan
Blade: full tang in AUS-8 57 / 59HRC stainless steel
Blade treatment: nitriding
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 127mm.
Weight: 68g.
Sheath: in ABS with clip
Notes: smaller version of the TDI Law Enforcement 1480 model

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like New
* Commercially available 2018 Exemplar; currently offering other variants in other configurations.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended use: collectible/sporting/military

Production type: Midtech
Country of manufacture: South Africa
Blade: stainless steel CPM-S35VN
Blade treatment: blackwash
Handle: integral, machined titanium from solid, blackwash finish
Blade length: 103mm.
Blade thickness: 4.5mm.
Length closed: 132mm.
Total length: 234mm.
Thickness when closed: 16mm.
Weight: 191g.
Opening: Carson Flipper type, on ball bearings
Closure: FrameLock
Clip: titanium, machined from billet
Packaging: plastic case with ADV Tactical logos
Notes: entirely designed and built by Andre De Villiers in his own workshop

Intended use: collection/sporting

Type of production: MidTech (partially mechanized craft production)
Country of manufacture: South Africa
Blade: stainless steel CPM-S35VN
Blade finish: satin-finished
Handle: PVD titanium with G10 insert
Blade length: 92mm.
Blade thickness: 4mm.
Length closed: 114mm.
Total length: 206mm.
Thickness when closed: 14mm.
Weight: 150g.
Opening: Carson Flipper system on ball bearings
Closure: Button Lock with additional safety
Clip: titanium, laser engraved
Packaging: Nylon pouch with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

Intended use: collection/sporting

Type of production: MidTech (partially mechanized craft production)
Country of manufacture: South Africa
Blade: stainless steel CPM SW35VN
Blade finish: Dual Tone - Sandblasted and Satin finish
Handle: Titanium Dual Tone with Fat Carbon Snake Skin insert
Blade Length: 105mm.
Blade thickness: 4.8mm.
Length closed: 130mm.
Total length: 230mm.
Thickness when closed: 17mm.
Balance: backward
Weight: 248g.
Opening: carson Flipper system on ball bearings
Closure: Frame Lock with removable stainless steel clapper
Clip: Titanium Dual Tone, machined from billet, removable and reversible
Packaging: Nylon pouch with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

The Kudu Hunter fixed-blade knife offers an excellent balance between form and function: the wide drop point blade is reminiscent of its predecessor model Harpoon, but without the dedicated thumb rest. The handle is extremely comfortable for different types of grips, and its shape does not cause fatigue during long periods of use. The Kydex scabbard has a Kydex belt loop that allows you to switch between normal belt carry and scout carry, right or left handed, with ease. This is truly an excellent "all-around" design by Andre.


Intended use: collection/sporting

Type of manufacture: midtech
Country of manufacture: South Africa
Blade: full tang, stainless steel M390
Blade treatment: Satin finish
Handle: Black G10
Blade length: 115mm.
Blade thickness: 4.8mm.
Total length: 228mm.
Balance: backward
Weight: 205g.
Sheath: carbon fiber-effect kydex with multi-position belt attachment
Packaging: -
Notes: designed and made entirely by Andre De Villiers

Il Red Spacer KA-BAR è probabilmente il coltello KA-BAR più collezionabile realizzato durante la seconda guerra mondiale. Il distintivo distanziatore rosso presente sotto la guardia ha attirato l'attenzione dei collezionisti per decenni. Sebbene gli originali siano rari e costosi, il laboratorio State & Union di KA-BAR - che si occupa delle realizzazioni custom - ha realizzato un piccolo lotto di questo iconico coltello.

Le rondelle in pelle sono modellate a mano per creare un aspetto invecchiato. Il fondello e la guardia sono lavorate artigianalmente per replicare le forme e le dimensioni dell'originale.

Ogni distanziatore rosso è fatto a mano per essere leggermente più lungo dell'attuale distanziatore utilizzato sui coltelli da combattimento/utilità KA-BAR. La lama viene sabbiata, quindi trattata a freddo.

Il fodero subisce un processo di invecchiamento per scurire la pelle e far corrispondere il colore del fodero originale.

Destinazione d'uso: Tattico/Militare

Lama: in acciaio al carbonio 1095 56/58HRC
Manicatura: anelli di cuoio
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 290mm.
Bilanciatura: arretrata - 1 cm. dal ramo di guardia inferiore
Peso: 305g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: -

La Coltelleria Collini di Busto Arsizio è distributore ufficiale per l'Italia del marchio KA-BAR

Intended Use: Light Utility

Production type: industrial
Country of Production: China
Blade: full tang, stainless steel 8Cr13MoV
Blade finish: Powder coated
Handle: G10
Blade length: 152mm.
Blade thickness: 4mm.
Total length: 286mm.
Weight: 280g.
Sheath: ABS with belt clip system, M.O.L.L.E. compatible.
Notes: -

Intended Use: Light Utility

Production type: industrial
Country of Production: China
Blade: full tang, stainless steel 8Cr13MoV
Blade finish: Powder coated
Handle: G10
Blade length: 122mm.
Blade thickness: 4mm.
Total length: 254mm.
Weight: 275g.
Sheath: ABS with belt clip system, M.O.L.L.E. compatible.
Notes: -

Intended Use: Sporting / Collection

Country of Production: Taiwan
Blade: AUS 8A stainless steel with Gray Powder Coat treatment
Handle: GFN-PA66
Blade Length: 89mm.
Blade thickness: 2.8mm.
Length closed: 114mm.
Total length: 204mm.
Weight: 95g.
Closure: Back Lock
Opening: One-handed, through pivot on the blade
Clip: steel, removable, ambidextrous
Package: cardboard box with Ka-Bar logos

Intended use: Hiking / Heavy Utility

Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Black Traction Coating
Handle: Zytel
Blade length: 203mm.
Blade thickness: 5mm.
Total length: 343mm.
Weight: 337g.
Sheath: ABS and Nylon
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: Tactical / Military / Collection

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 20.3 mm.
Blade thickness: 4.2 mm.
Total length: 32.4 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logos

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Similar to the most famous and best-selling model 1217 USMC, the model 1219 differs in the use of the U.S. LOGO. ARMY engraved on the blade and on the sheath and with the partially serrated blade.

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: sports

Blade: 4116 stainless steel 57 hrc
Handle: leather rings
Blade length: 175mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 295 mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 200g.
Closing: -
Clip: -
Sheath: in leather
Note: -

From KA-BAR regarding the special engraved logo: The engraved logo features the historical "The Union" logo from the early 1900s, a bear, and the years marking 120 years - 1898 and 2018.
The significance of the bear is in the KA-BAR name itself. An Alaskan hunter was attacked by a Kodiak bear, but successfully defended himself using his Union Cutlery knife. The hunter was so thankful that he sent a letter describing the ordeal with "K a Bar" (Kill a Bear) as well as sending in the bear fur. The officers of Union Cutlery decided to adopt KA-BAR as a trademark in 1924.

Intended use: Tactical / Military
Production: U.S.A.
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Intended use: collection / sport / military

Type of production: artisan
Country of production: South Africa
Blade: stainless steel N690Co
Blade treatment: dual tone satin
Handle: titanium anodized
Blade length: 100mm.
Blade thickness: 4.7mm.
Length closed: 130mm.
Total length: 226mm.
Thick when closed: 13.2mm.
Balancing: 2cm back from the guard branch
Weight: 212g.
Opening: Flipper type on ball bearings
Closure: FrameLock
Clip: titanium anodized, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

Intended use: collection / sports / military

Type of production: artisan seeds
Country of production: South Africa
Blade: N690Co stainless steel
Blade treatment: Black
Handle: Black titanium
Blade length: 100mm.
Blade thickness: 4.7mm.
Closed length: 130mm.
Total length: 226mm.
Thick when closed: 13.2mm.
Balance: 2cm set back from the guard branch
Weight: 212g.
Opening: Flipper on ball bearings
Closure: FrameLock
Clip: anodised titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

Intended use: collection / sport / military

Type of production: semi-handmade
Country of production: South Africa
Blade: full tang, in N690Co stainless steel
Blade treatment: satin finish
Handle: G10
Blade length: 106mm.
Blade thickness: 4.7mm.
Total length: 228mm.
Balancing: set back, at 2cm. from the guard branch
Weight: 216g.
Sheath: in kydex, acon Tek-Lok attacks
Packaging: cordura case with ADV Tactical logos
Notes: designed and built by Andre De Villiers

Intended use: collection / sports / military

Type of production: artisan seeds
Country of production: South Africa
Blade: full tang, in N690Co stainless steel
Blade treatment: satin finish
Handle: G10
Blade length: 106mm.
Blade thickness: 4.7mm.
Total length: 228mm.
Balancing: set back, at 2cm. from the guard branch
Weight: 216g.
Sheath: in kydex, with Tek-Lok type attacks
Packaging: -
Notes: designed and built by Andre De Villiers

Intended use: collection / sport

Type of production: artisan
Country of production: South Africa
Blade: in steel D2
Blade treatment: satin
Handle: in steel, with inserts in Jaracanda briarwood
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 190mm.
Thick when closed: 14mm.
Balancing: set back to 2cm from the guard branch
Weight: 164g.
Opening: Nail Nick
Closure: BackLock
Clip: absent
Packaging: cordura case with ADV Tactical logos
Notes: designed and built by Andre De Villiers

Intended use: collection / sport

Type of production: semi-handmade
Country of production: South Africa
Blade: N690Co Stainless Steel
Blade treatment: Satin
Handle: in steel, with ebony wood inserts
Blade length: 52mm.
Blade thickness: 2.2mm.
Length closed: 72mm.
Total length: 124mm.
Thick when closed: 8.5mm.
Balancing: set back
Weight: 44g.
Opening: Nail Nick
Closure: BackLock
Clip: Absent
Packaging: cordura case with ADV Tactical logos
Notes: designed and built by Andre De Villiers

Intended use: collection / sport

Type of production: semi-handmade
Country of production: South Africa
Blade: in steel N690Co
Blade treatment: Satin
Handle: in steel, with abalone inserts
Blade length: 52mm.
Blade thickness: 2.2mm.
Length closed: 72mm.
Total length: 124mm.
Thick when closed: 8.5mm.
Balancing: set back
Weight: 44g.
Opening: Nail Nick
Closure: Slipjoint
Clip: Absent
Packaging: cordura case with ADV Tactical logos
Notes: designed and built by Andre De Villiers

Intended use: collection / sport

Type of production: artisan seeds
Country of production: South Africa
Blade: in D2 steel
Blade treatment: satin finish
Handle: steel with Jaracanda briar inserts
Blade length: 75mm.
Blade thickness: 4 mm.
Length closed: 100mm.
Total length: 175mm.
Thick when closed: 14mm.
Balance: 2 cm set back from the guard branch
Weight: 120 g.
Opening: Nail Nick
Closure: Slip Joint (without blade lock)
Clip: -
Packaging: cordura case with ADV tactical logos
Notes: Designed and manufactured by Andre De Villiers

Intended use: collection / sport / military

Type of production: semi-handmade
Country of production: South Africa
Blade: N690Co steel
Blade treatment: PVD blackwash
Handle: titanium blackwash PVD
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 177mm.
Thick when closed: 11.7mm.
Balancing: set back, at 2cm. from the guard branch
Weight: 108g.
Opening: Carson Flipper type on ball bearings
Closure: FrameLock
Clip: titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: marked as "prototype" - designed and built by Andre De Villiers

Purpose: collection / sport

Type of production: artisanal seed
Country of Origin: South Africa
Blade: D2 steel
Blade treatment: Satin
Handle: Steel with Rosewood wood inserts
Blade Length: 80mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 190mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 164g.
Opening: Nail Nick
Closing: Back Lock
Clip: -
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

Intended use: collection / sport / military

Type of production: artisan
Country of production: South Africa
Blade: CPM S35VN steel
Blade treatment: satin
Handle: titanium and G10
Blade length: 103mm.
Blade thickness: 4.5mm.
Length closed: 132mm.
Total length: 234mm.
Thick when closed: 14mm.
Balancing: on the guard branch
Weight: 168g.
Opening: Carson Flipper type, on ball bearings
Closing: FrameLock with additional cursor lock
Clip: titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

Intended use: collection / sports / military

Type of production: artisan seeds
Country of production: South Africa
Blade: N690Co stainless steel
Blade treatment: Satin
Handle: Dual Tone titanium anodized
Blade length: 100mm.
Blade thickness: 4.7mm.
Closed length: 130mm.
Total length: 226mm.
Thick when closed: 13.2mm.
Balance: 2cm set back from the guard branch
Weight: 212g.
Opening: Flipper on ball bearings
Closure: FrameLock
Clip: anodised titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

Intended use: Machete

Blade: carbon steel 1095 56 / 58HRC
Country of production: USA
Finishing: Teflonatura
Handle: GFN-PA66 polymer
Blade length: 359mm.
Blade thickness: 5mm.
Total length: 498mm.
Balancing: advanced
Weight: 589g.
Sheath: cordura, with vertical belt attachments

Intended use: Tactical / Utility

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflon coated
Handle: Ultramid
Blade Length: 155mm.
Blade thickness: 5mm.
Total Length: 287mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 338g.
Sheath: kydex

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: black
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -