Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE NOS FULL SET, NEW FROM STOCK
* Type: 1995 NOS knife - New Old Stock - New from stock
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory.
* Marks on blade: Given by time
* Marks on handle: Given by time.
* Box: Present, original, in very good condition
* Scabbard: Present, original, in very good condition, with small marks given by time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: collection / tactical / sporting

Type of production: Industrial
Country of Production: USA
Blade: Carbon V steel
Blade treatment: varnishing
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balance: advanced
Weight: 265g.
Sheath: Cordura
Packaging: cardboard box with Cold Steel logos and "Made in USA" logos.
Notes: knife from 1995 NOS - New Old Stock - New from stock

Intended Use: Tactical

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Stonewashed
Handle: made of Griv-Ex polymer, with steel pommel
Blade length: 267mm.
Blade thickness: 5mm.
Total length: 387mm.
Balance: Advanced
Weight: 474g.
Sheath: Secure-Ex ABS
Packaging: Cardboard box with Cold Steel logos
Notes: Limited and numbered edition with serial number engraved on blade and with Lynn Thompson's autograph on box

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

The first and original Tanto "Made in Japan", here in a 1980's version with a San Mai steel blade, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto.

* Type: Previously Purchased
* Condition: very good, never used, some light surface marks (visible against the light)
* Commercially available Out of production
* Sharpening: Original wire
* Marks on blade: yes, superficial
* Marks on handle: no
* Box: no
* Scabbard: Present - Original, in good general condition, some marks present
* Manuals, Certificates and Warranties: no
* Checked and certified by our internal laboratory

Intended use: Collection

Type of production: Industrial
Country of manufacture: Japan
Blade: San Mai steel - Made in Japan
Blade treatment: satin finish
Handle: Kraton with brass guard and pommel
Blade length: 145m
Blade thickness: 4.7mm.
Total length: 285mm.
Balance: recessed
Weight: 268g.
Sheath: Black leather, branded "Japan".
Packaging: without original box
Notes: Knife from a private collection, first series, produced in the 1980s and out of production since the 1990s, overall in very good condition.

Knife from a private collection - The first and original Tanto "Made in Japan", here in the second series from 1986, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto - Overall in very good condition, with no particular scratches, marks or abrasions on blade and handle; a few small marks of time on scabbard - Product still has original factory sharpening, although it would need a brightening-no signs of wear anyway - Supplied with its own original leather scabbard marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: Japan
Blade: made of "Cold Steel's 400 Series Stainless" steel (presumably 420 stainless)
Blade treatment: satin finish
Handle: made of Kraton with brass guard and pommel
Blade length: 145m.
Blade thickness: 5mm.
Total length: 285mm.
Balance: backward
Weight: 259g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.

Knife from a private collection - First series, first generation, the first and original "Made in USA" Trailmaster from 1988 - Overall in good condition, shows small signs of oxidation on the blade and some minor signs of time on the leather sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath, but lacking box and manuals - Checked and certified by our in-house lab.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: USA
Blade: Carbon V steel
Blade treatment: satin finish
Handle: kraton and brass
Blade length: 240mm.
Blade thickness: 8mm.
Total length: 370mm.
Balance: advanced
Weight: 515g.
Sheath: black leather
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988, overall in good condition.

Knife from a private collection - The first and original Magnum Tanto "Made in Japan" from 1988, progenitor of the modern generation continued with the Magnum Tanto II in 1990 - Overall in very good condition, with no particular scratches, marks or abrasions on blade, handle and sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: Japan
Blade: stainless steel AUS-8A
Blade treatment: satin finish
Handle: kraton
Blade length: 230mm.
Blade thickness: 5mm.
Total length: 370mm.
Balance: advanced
Weight: 330g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.

Knife from a private collection - The original Recon Tanto "Made in USA" of the '90s, progenitor of the current generation - Absolutely like new, never taken out of the box, still with the original factory grease on the blade, sheath without signs of use and knife insertion - Complete, with original box and Cold Steel warranty - Checked and certified by our internal laboratory.

Intended use: collection / tactical / sporting

Production type: Industrial
Country of Production: USA
Blade: Carbon V steel
Blade treatment: varnishing
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balancing: advanced
Weight: 265g.
Scabbard: Simil-leather
Package: Cardboard box with Cold Steel and "Made in USA" logos
Notes: Knife from a private collection - Made in the late 90's (presumably 1997/1998) - Absolutely like new

Intended use: collection / sporting

Production type: Industrial
Country of Production: Taiwan
Blade: Carbon steel CPM-3V
Blade treatment: satin finish
Handle: Kray-Ex (Kraton) with stainless steel guard and pommel
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 292mm.
Balance: on the guard branch
Weight: 269g.
Sheath: Secure-Ex ABS with nylon belt loop.
Packaging: cardboard box with Cold Steel logos
Notes: new version 2021 of the popular Master Tanto 6" produced by Cold Steel since the early 80's

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade finish: Satin finish
Handle: Kray-Ex™
Blade length: 82mm.
Blade thickness: 3mm.
Total length: 168mm.
Weight: 93.5g.
Scabbard: Secure-Ex® thermoplastic material
Packaging: Cardboard box with Cold Steel logos
Note: the package does not include the sheath's docking system or attachment system.

Intended Use: Sporting / Hunting

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade Finish: Polished
Handle: Kray-Ex™
Blade length: 165mm.
Blade thickness: 3.5mm.
Total length: 298mm.
Weight: 159g.
Scabbard: Secure-Ex® in thermoplastic material
Packaging: Cardboard box with Cold Steel logos
Notes: Made in collaboration with Tim Wells, one of the most famous bow and skeet hunters in the world.

Intended use: tactical / sports

Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel laminated with cutting edge in VG-10
Blade treatment: satin finish
Handle: Kray-Ex (Kraton)
Blade length: 155mm.
Blade thickness: 5mm.
Total length: 275mm.
Balancing: on the guard branch
Weight: 249g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos
Notes: new production 2018

The Special Forces Shovel takes its cue directly from the military spade used by the Soviet Spetnaz, one of the elite corps of the former Soviet Union.

The head of the spade is forged in painted carbon steel and has a utility / ax sharpening that can easily be resumed to give a razor sharpening; the handle is instead in wood.

Blade: in painted carbon steel
Handle: American walnut wood
Total length: 76.2cm.
Width: 15cm.
Thickness: 2.5mm
Weight: 1003g.

Intended use: Sports / Hunting / Collection

Type of production: Industrial
Country of production: Taiwan
Blade: carbon steel O-1
Blade treatment: satin finish
Handle: micarta, with brass guard
Blade length: 269mm.
Blade thickness: 7.6mm.
Total length: 399mm.
Balancing: advanced
Weight: 483g.
Sheath: in ABS, of the SecurEx type
Packaging: cardboard box with Cold Steel logos
Note: -

Use: Sporting 

Production Type: Industrial
Country of Production: Taiwan
Blade: stainless steel AUS-8A
Blade finishing: stonewashed
Handle: Kray-Ex kraton
Blade Length: 229mm.
Blade thickness: 4,7mm.
Total length: 359mm.
Balance: on guard branch
Weight: 352g.
Scabbard: Secur-Ex Thermoplastic
Packaging: cardboard box with Cold Steel logos
Notes: -

Sturdy bowie knife with clip point blade made of steel with a high carbon content.

Employment: Sports / Collection

Type of production: seeds / craft
Lama production: India
Blade: 1085 High Carbon steel
Lama treatment: burnishing
Handle: rose wood
Blade length: 305mm.
Blade thickness: 6.2mm.
Total length: 440mm.
Balancing: set back
Weight: 658g.
Sheath: in leather and metal
Package: -
Note:

Intended use: Hiking

Type of production: Industrial
Country of production: South Africa
Blade: 1055 carbon steel
Blade treatment: black protective paint
Handle: Polypropylene
Blade length: 330mm.
Blade thickness: 3mm.
Total length: 470mm.
Balancing: Advanced
Weight: 566g.
Opening: Carson Flipper system
Sheath: Nylon with rigid plastic parts
Packaging: Transparent plastic bag
Note: -

Intended Use: Hunting

Type of production: Industrial
Production Country: Japan
Blade: AUS-8A stainless steel
Blade treatment: satin finish
Handle: ABS
Blade length: 82mm.
Blade thickness: 2 mm.
Overall length: 184mm.
Weight: 39g.
Sheath: Secure-Ex in ABS
Packaging: Sealed box with Cold Steel logos
Notes: -

Intended use: Sport / Hunting

Type of production: Industrial
Pase production: Taiwan
Blade: CPM-3V steel
Blade treatment: Black DLC
Handle: Kraton
Blade length: 114mm.
Blade thickness: 4.8mm.
Overall length: 235mm.
Balancing: back to 1cm from the guard branch
Weight: 168g.
Sheath: ABS
Packaging: cardboard box with Cold Steel logos
Notes: -

Specifications:
Blade Length: 16"
Overall Length: 22"
Steel: 1055 Carbon Steel w/ Black Baked on Anti Rust Matte Finish
Weight: 23.4 oz
Blade Thickness: 2.8 mm
Handle: 5 5/8" Long. Polypropylene
Sheath: Cor-Ex™ Sheath

Made from tough rigid 1055 carbon steel with a strong spring temper, it's virtually unbreakable and offers the weight forward balance necessary to chop through vines, saplings, and brush and even trees with ease. What's more, its sharp point offers plenty of belly for slashing or even skinning, and in an emergency, adds to it value as an improvised self defense tool. Sold fully sharpened, and shipped with a sturdy nylon sheath, it's ready for your jungle wherever it may be.

Intended use: Tactical / Utility

Type of production: Industrial
Production Lama: China
Blade: 1055 carbon steel
Blade treatment: epoxy paint
Handle: Polypropylene
Blade length: 175mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 303mm.
Balancing: on the guard branch
Weight: 340g.
Closing: -
Clip: -
Sheath: SecureEx
Packaging: cardboard box with Cold Steel logos
Note: -

Destinazione d'uso: machete

Tipo di produzione: industriale
Lama: in acciaio al carbonio 1050
Produzione Lama: Sud Africa
Manicatura: PVC
Lunghezza lama: 460mm.
Spessore della lama: 2mm.
Lunghezza totale: 600mm.
Bilanciatura: avanzata, a 14,5cm. dall'impugnatura
Peso: 460g.
Fodero: in Nylon e ABS
Note: -

New version, equipped with a Nylon blade serrated sheath on the back

Intended use: machete

Type of production: industrial
Blade: 1050 carbon steel
Lama production: South Africa
Handle: PVC
Blade length: 610mm.
Blade thickness: 2mm.
Length closed: -
Total length: 755mm.
Balancing: advanced, at 23cm. from the handle
Weight: 560g.
Closing: -
Clip: -
Sheath: in nylon
Note: -

Destinazione d'uso: Sportivo / Caccia

Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: In acciaio inox laminato VG-1 San Mai III
Trattamento Lama: -
Manicatura: Kraton
Lunghezza lama: 117mm.
Spessore lama: 4.5mm.
Lunghezza totale: 235mm.
Bilanciatura: Arretrata ad 1cm dal ramo di guardia
Peso: 176g.
Chiusura: -
Clip: -
Fodero: ABS
Confezione: scatola in cartone con loghi Cold Steel
Note: -

Destinazione d'uso: Caccia / Escursione

Tipo di produzione: Industriale
Paese di produzione: Taiwan
Lama: AUS-10A
Trattamento Lama: Satinatura
Manicatura: Kraton
Lunghezza lama: 74mm.
Spessore lama: 3mm.
Lunghezza totale: 155mm.
Peso: 54g.
Fodero: ABS
Confezione: Scatola di cartone con loghi Cold Steel

Solo leggermente più piccolo del Trail Master Bowie ma dalle stesse caratteristiche di qualità. La durezza del l'acciaio (SK-5), lo speciale trattamento termico, la tenacità e lo spessore (7,5 mm) della lama, il taglio del filo, fanno di questo coltello un ottimo strumento adatto a qualunque utilizzo.

Lama: in acciaio O1 con finitura Black
Lunghezza lama: cm 19
Lunghezza totale: cm 32

Spessore lama: 7mm

Manicatura: in Kraton
Peso: 440 grammi

Cold Steel - Spetsnaz Special Forces Shovel - Shovel

The Special Forces Shovel draws closely by the spade used by military Spetnaz Soviets, one of the elite corps of the former Soviet Union.

The head of the spade is forged in painted carbon steel and has sharpening utility / ax from that can safely be resumed to give sharpening a razor; instead the handle is made of wood.

Specifications:
- Blade: carbon steel painted
- Total length: 50cm.
- Width: 15cm.
- Thickness: 2.5mm
- Weight: 755g.

Intended use: tactical / sports

Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel laminated with cutting edge in VG-10
Blade treatment: satin finish
Handle: Kray-Ex (Kraton)
Blade length: 155mm.
Blade thickness: 5mm.
Total length: 275mm.
Balancing: on the guard branch
Weight: 249g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos
Notes: new production 2018

Intended Use: Neck Knife

Blade: full tang in 420 stainless steel
Country of manufacture: Taiwan
Handle: cotton rope
Blade length: 108mm.
Blade thickness: 5.75mm.
Total length: 203mm.
Weight: 77g.
Scabbard: ABS, for neck
Notes: -

Nuova versione 2016, ora in acciaio O1

Destinazione d'uso: hard utility/sportivo

Tipo di produzione: industriale
Produzione Lama: Taiwan
Lama: in acciaio O1
Trattamento Lama: satinatura
Manicatura: Kraton
Lunghezza lama: 240mm.
Spessore lama: 8mm.
Lunghezza totale: 370mm.
Spessore da chiuso: -
Bilanciatura: avanzata, a 3cm dal ramo di guardia
Peso: 515g.
Fodero: SecurEx in materiale termoplastico
Confezione: astuccio di cartone con loghi cold steel
Note: versione 2016 con nuovo acciaio e nuovo fodero

Production type: Industrial
Country of manufacture: Japan
Blade: Stainless steel SanMai III VG-1
Blade treatment: Satin finish
Handle: Kraton
Blade length: 240mm.
Blade thickness: 8mm.
Total length: 370mm.
Balance: advanced, 3cm from the guard branch
Weight: 515g.
Sheath: black cordura
Packaging: blue cardboard case with cold steel logos
Notes: -