bing
News
Best news of March
Shop By
Shopping Options
Brand
  1. Acta Non Verba 17items
  2. Aitor 21items
  3. Antonini 20items
  4. Benchmade 278items
  5. BlackFox 35items
  6. Boker 245items
  7. Cold Steel 158items
  8. Coltelleria Collini 54items
  9. Consigli 55items
  10. CRKT 99items
  11. Due Cigni 1item
  12. Extrema Ratio 301items
  13. Fallkniven 100items
  14. Fox Knives 400items
  15. Gastronom Knives 1item
  16. Global Knives 3items
  17. Horl 6items
  18. Ka Bar 77items
  19. Kai Knives 8items
  20. Laguiole en Aubrac 95items
  21. Leatherman 7items
  22. Lion Steel 128items
  23. Maserin 220items
  24. Mcusta 75items
  25. Nitecore 13items
  26. Opinel 87items
  27. Pfeil 7items
  28. Roselli 18items
  29. Saji Takeshi 45items
  30. Sanelli 7items
  31. Spyderco 203items
  32. Victorinox 44items
  33. Viper 203items
  34. Wahl 1item
  35. Wusthof 6items
  36. Zero Tolerance 105items
  37. Zwilling 3items
  38. Approved 174items
  39. Peltonen 9items
  40. ADV Tactical 24items
  41. Ahti 10items
  42. Al-Mar 6items
  43. Andrew Demko Knives 5items
  44. Arkansas 2items
  45. ATC 4items
  46. Azero 3items
  47. Bark River 10items
  48. Basko 1item
  49. Bastinelli Knives 12items
  50. Bear and Son 1item
  51. Begg Knives 7items
  52. Beltrame 1item
  53. Benchmark 1item
  54. Beretta 2items
  55. Berkel 1item
  56. Berti 3items
  57. BlachHawk Blades 10items
  58. Blackjack 10items
  59. Blade Magazine 12items
  60. BladeTech 1item
  61. Bradley 5items
  62. Brian Tighe and Friends 4items
  63. Browning 2items
  64. Brusletto 1item
  65. Buck 28items
  66. Carl Schlieper 6items
  67. Case 13items
  68. Cesare Tonelli 7items
  69. Chris Reeve Knives 58items
  70. Citadel 32items
  71. Combative Edge 5items
  72. Corey Sar Fox 2items
  73. Crusader Forge 1item
  74. David 4items
  75. DMT 4items
  76. Douk Douk 5items
  77. Dovo 2items
  78. Down Under Knives 10items
  79. DPX Gear 8items
  80. DuStar 1item
  81. Eickhorn 9items
  82. Elite Tactical 2items
  83. Emerson 12items
  84. Enzo 20items
  85. EOS 13items
  86. Esee Knives 16items
  87. Estas 1item
  88. F. Pachì 1item
  89. Fantoni 40items
  90. Forge de Laguiole 6items
  91. Freeman Outdoor Gear 11items
  92. G. Sakai 4items
  93. Gary Bradburn 1item
  94. Gatco 2items
  95. Gerber 44items
  96. Gilles 6items
  97. Glock knives 7items
  98. Guardian Tactical 20items
  99. Halcon Spain 3items
  100. Hardcore Hardware 2items
  101. Heckler and Kock 1item
  102. Helle 15items
  103. Herold 6items
  104. Hikari Japan 6items
  105. Hoffner Knives 18items
  106. Hogue Knives 10items
  107. Hollywood Collectibles Group 11items
  108. HTM Knives 1item
  109. Ibberson 1item
  110. Indiana Jones 1item
  111. Jaguar Knives 8items
  112. JetBeam 1item
  113. Kanekoma 5items
  114. Kanetsune 2items
  115. Karhunkynsi Puukko 2items
  116. Kasumi 2items
  117. Kauhavan Puukkopaja 3items
  118. Kershaw 48items
  119. Kiku Knives 13items
  120. Koji Hara 3items
  121. La Cantina 10items
  122. La Passion des Couteaux 1item
  123. Lame D'autore 40items
  124. Lansky 4items
  125. Linder 22items
  126. Lodge 1item
  127. Lone Wolf 9items
  128. Mac 11items
  129. Master Cutlery 4items
  130. Master of Defense 3items
  131. Maxpedition 3items
  132. MedFordKnives 47items
  133. Mercury 3items
  134. Microtech 14items
  135. Mil Tac 4items
  136. Minosharp 4items
  137. Mission 4items
  138. MKM 84items
  139. Mora Kniv 14items
  140. Muela 3items
  141. Nepal Kukri 44items
  142. Nieto 5items
  143. Nilte 2items
  144. No Brand 43items
  145. Norton 1item
  146. Olamic Cutlery 5items
  147. Ontario 49items
  148. Original Usa 15items
  149. Othello 10items
  150. Piscitelli 2items
  151. Pohl Force 76items
  152. Puma 1item
  153. Quartermaster 19items
  154. Randall 3items
  155. Red Claw 4items
  156. Remington 1item
  157. RH Preyda 8items
  158. Rick Hinderer Knives 11items
  159. Rivista Coltelli 38items
  160. Rockstead 27items
  161. Sandrin Knives 7items
  162. Sanelli Ambrogio 4items
  163. Santa Fe 2items
  164. Saturn Knives 2items
  165. Sergio Consoli 2items
  166. Smith and Wesson 9items
  167. SOG 43items
  168. Spartan Blades 54items
  169. Stangen 1item
  170. Stedemon Knife Co. 2items
  171. Steel Will 2items
  172. Steel X 1item
  173. Strider 25items
  174. Taidea 2items
  175. Takefu knives 5items
  176. Tasmanian Tiger 3items
  177. TB Outdoor 11items
  178. Timberline 1item
  179. Tops Knives 88items
  180. TRC Knives 7items
  181. Tridentum 3items
  182. Ulticlip 3items
  183. United Cutlery 26items
  184. Valyrian Steel 1item
  185. Waffentechnik 5items
  186. WanderTactical 300items
  187. We Knife Co. 3items
  188. White River Knife and Tool 28items
  189. Wildsteer 11items
  190. Windlass 4items
  191. Work Sharp 3items
Less
Stock
  1. In Stock 19items
  2. Out of Stock 119items
Rating
  1. 5
    9items
  2. 4
    & up
    29items
  3. 3
    & up
    30items
On Sale
  1. On Sale 2items
Set Ascending Direction

Items 1-48 of 138

Page
  1. Pohl Force - Bravo Two Classic - FDE Dark Stonewashed ATS-34 - 1079 - knife

    To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.

    From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.

    It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.

    The Bravo Two Classic BK is equipped with an FDE (Flat Dark Earth) fibreglass handle and a Tanto blade with a Dark Stonewashed finish.


    Intended use: Tactical, collection
    Type of production: Industrial
    Blade: Hitachi ATS-34 stainless steel
    Blade finish: Dark Stonewashed
    Handle: GRP (glass-reinforced polyester)
    Blade length: 83mm.
    Blade thickness: 3.5mm.
    Total length: 195mm.
    Thickness when closed: 14mm.
    Weight: 120g.
    Closure: Back Lock
    Packaging: Cardboard box with Pohl Force logos
    Notes: Numbered and with certificate of authenticity with signature and date of manufacture

    PF-1079FDE
    €172.13
    Only 2 left
    Only 2 left
  2. Pohl Force - Bravo One Classic - FDE Dark Stonewashed ATS-34 - 1077 - knife

    To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.

    From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.

    It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.

    The Bravo One Classic BK features an FDE (Flat Dark Earth) fibreglass handle and a Drop point blade with a Dark Stonewashed finish.


    Intended use: Tactical, collection
    Type of production: Industrial
    Blade: Hitachi ATS-34 stainless steel
    Blade finish: Dark Stonewashed
    Handle: GRP (glass-reinforced polyester)
    Blade length: 83mm.
    Blade thickness: 3.5mm.
    Total length: 195mm.
    Thickness when closed: 14mm.
    Weight: 120g.
    Closure: Back Lock
    Packaging: Cardboard box with Pohl Force logos
    Notes: Numbered and with certificate of authenticity with signature and date of manufacture

    PF-1077FDE
    €172.13
    Only 1 left
    Only 1 left
  3. Pohl Force - Charlie Three SW - D2 steel - 6011 - knife

    With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Three covers a wide range of applications.

    The modern Spear Point blade and handle of the Charlie Three are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The Stonewashed finish creates a scratch-resistant surface and increases the blade's corrosion resistance.

    Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip. 

    The Charlie Three BK comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.

     


    Intended Use: Tactical/Sporting

    Blade: Full tang made of D2 steel at 59/60HRC with Stonewashed finish
    Handle: -
    Blade length: 95mm.
    Blade thickness: 6mm.
    Total length: 210mm.
    Weight: 152g.
    Sheath: kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
    Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signed

    PF-6011
    €159.84
    Only 1 left
    Only 1 left
  4. Ontario Knife Company - Spec Plus SP-2 Survival Knife - 8680 - knife

    Intended Use: Survival / Tactical / Military

    Production Type: Industrial
    Country of Production: USA
    Blade: 1075 carbon steel hidden tang
    Blade treatment: Powder coating
    Handle: kraton
    Blade length: 140mm.
    Blade thickness: 4.5mm.
    Total length: 269mm. 
    Balancing: advanced
    Weight: 255g.
    Scabbard: Belt, nylon, for vertical carrying.
    Packaging: Cardboard box with OKC logos
    Notes: -

    ON8680
    €57.38
    Only 1 left
    Only 1 left
  5. Pohl Force - Compact Two BK TiNi - D2 steel - 6032 - knife

    With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.

    The focus is on the massive classic Drop Point blade of the Compact Two, which is 86 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The surface of the blade has a tactical, non-reflective TiNi titanium nitriding coating that provides excellent protection against external corrosives.

    The reduced handle design is the basis for the knife's very compact size. The pleasantly rounded tang and cleverly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.

    The Compact TWO BK is equipped with a robust, high-quality Kydex sheath in black. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.

     


    Intended use: Tactical / Sporting

    Blade: Full tang in D2 steel at 59/60HRC with TiNi coating
    Handle: In G-10
    Blade length: 86mm.
    Blade thickness: 6mm.
    Total length: 170mm.
    Weight: 165g.
    Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
    Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.

    PF-6032
    €139.34
    Only 2 left
    Only 2 left
  6. Pohl Force - Compact Two SW - D2 steel - 6031 - knife

    With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.

    The focus is on the massive classic Drop Point blade of the Compact Two, which is 86 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion.

    The reduced handle design is the basis for the knife's very compact size. The nicely rounded tang and expertly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.

    The Compact Two SW is equipped with a robust, high-quality Kydex sheath in FDE (Flat Dark Earth) color. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.

     


    Intended use: Tactical / Sporting

    Blade: Full tang in D2 steel at 59/60HRC
    Handle: In G-10
    Blade length: 86mm.
    Blade thickness: 6mm.
    Total length: 170mm.
    Weight: 165g.
    Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
    Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.

    PF-6031
    €135.25
    Only 1 left
    Only 1 left
    Rating:
    93%
    4.7
  7. Pohl Force - Compact One SW - D2 steel - 6021 - knife

    With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.

    The focus is on the massive, classic Bowie blade of the Compact One, which is 88 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion.

    The reduced handle design is the basis for the knife's very compact size. The nicely rounded tang and expertly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.

    The Compact One SW is equipped with a robust, high-quality Kydex sheath in FDE (Flat Dark Earth) color. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.

     


    Intended use: Tactical / Sporting

    Blade: Full tang in D2 steel at 59/60HRC
    Handle: In G-10
    Blade length: 88mm.
    Blade thickness: 6mm.
    Total length: 170mm.
    Weight: 165g.
    Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
    Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.

    PF-6021
    €135.25
    Only 2 left
    Only 2 left
  8. Ontario Knife Company - Bird and Trout Knife with leather sheath - 7027 - knife

    Known for their rugged longevity in countless practical applications, Ontario's famous Old Hickory knives have been a go-to for cooking and outdoor enthusiasts for over 95 years. This model, thanks to its small size and ease of use, is ideal for working birds and fish. It features an 8.5cm stainless steel blade with a satin finish. As with all Old Hickory models, this knife also features a wooden handle with brass rivets. Both the fillet knife and the leather sheath are made in the USA.

    Intended use: Fishing / Hunting / Cooking

    Type of production: industrial
    Country of production: USA
    Blade: 57-59 HRC stainless steel
    Blade treatment: satin finish
    Handle: wood
    Blade length: 85mm.
    Blade thickness: 2mm.
    Total length: 170mm.
    Sheath: in leather
    Packaging: Ontario official box
    Note: To make the knife sharper, through our in-house laboratory, we further sharpen each blade before shipping.

     

    CARE AND MAINTENANCE: it is recommended to wash it under running water and dry it immediately manually with a clean cotton cloth or absorbent paper.

    ON7027
    €24.59
    Only 2 left
    Only 2 left
    Rating:
    80%
    4
  9. Ontario Knife Company - 417 Filet Knife with leather sheath - 1275 - knife

    Revisiting a classic Ontario model, this Old Hickory fish fillet knife comes with a leather sheath. Ideal for hunting, fishing or cooking, the Ontario Old Hickory 417 Filet Knife features a 16cm stainless steel blade with a satin finish. As with all Old Hickory models, this knife also features a wooden handle with brass rivets. Both the fillet knife and the leather sheath are made in the USA.

    Intended use: Fishing / Hunting / Cooking

    Type of production: Industrial
    Country of production: USA
    Blade: 55-58 HRC stainless steel
    Blade treatment: satin finish
    Handle: wood
    Blade length: 160mm.
    Blade thickness: 2mm.
    Total length: 275mm.
    Sheath: in leather
    Packaging: Ontario official box
    Notes: To make the knife sharper, through our internal laboratory, we further sharpen each blade before shipping.

     

    CARE AND MAINTENANCE: it is recommended to wash it under running water and immediately dry it manually with a clean cotton cloth or absorbent paper.

    ON1275
    €36.89
    Only 3 left
    Only 3 left
  10. Ontario Knife Company - Old Hickory Hop Field Knife - 5060 - knife

    Produced by the American Ontario, this knife contains a series of elements that make it practical, manageable, simple, spartan and fascinating. The Hop field is a universal knife, convenient in the kitchen, perfect for a barbecue, valid for hiking or camping.

    Intended use: Hiking / Camp / Meat
    Type of production: Industrial
    Country of production: USA
    Blade: 1095 Carbon Steel 57-59 HRC
    Blade treatment: satin finish
    Handle: wood
    Blade length: 178mm.
    Blade thickness: 2mm.
    Total length: 300mm.
    Weight: 134g.
    Sheath: without sheath
    Packaging: -
    Notes: To make the knife sharper, through our internal laboratory, we further sharpen each blade.

    ON5060
    €16.39
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  11. Ontario Knife Company - Bob Dozier Arrow Folder - 9100 - knife

    Intended use: Tactical / EDC

    Type of production: Industrial
    Country of production: Taiwan
    Blade: in steel tool D2
    Blade treatment: Stonewashed
    Handle: G10
    Blade length: 92mm.
    Blade thickness: 3mm.
    Length closed: 115mm.
    Total length: 207mm.
    Thick when closed: 11.7mm.
    Weight: 85g.
    Opening: through thumbstood, from right-handed
    Washers: teflon
    Closure: liner lock
    Clip: stainless steel, removable
    Packaging: Cardboard box with Ontario Knife Company logos
    Notes: Design by Bob Dozier

    ON9100
    €56.56
    Only 3 left
    Only 3 left
  12. Ontario Knife Company - Bushcraft Woodsman - 8697 - knife

    Intended use: Hiking / Hunting

    Type of production: Industrial
    Country of production: USA
    Blade: full tang in 420 stainless steel
    Blade treatment: satin finish
    Handle: walnut wood
    Blade length: 240mm.
    Blade thickness: 5.8mm.
    Total length: 375mm.
    Balancing: slightly advanced
    Weight: 506g.
    Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
    Packaging: Cardboard box with OKC logos
    Note: -

    ON8697
    €127.05
    Only 2 left
    Only 2 left
  13. Ontario Knife Company - Hunt Plus Skinner - 9716 - knife

    Intended use: Hunting / Hiking

    Type of production: Industrial
    Country of production: USA
    Blade: full tang in 440B stainless steel
    Blade treatment: satin finish
    Handle: in kraton
    Blade length: 110mm.
    Blade thickness: 4.7mm.
    Total length: 230mm.
    Balancing: slightly advanced
    Weight: 160g.
    Sheath: nylon, belt, vertical port
    Packaging: Cardboard box with OKC logos
    Note: -

    ON9716
    €40.16
    Only 3 left
    Only 3 left
  14. EOS Elite Outfitting Solutions - Prawn Friction Folder Aluminum Blue - knives

    Intended use: Tactical / EDC / Collection

    Type of production: semi-handmade
    Country of production: USA
    Blade: CPM S35VN steel
    Blade treatment: -
    Handle: aluminum
    Blade length: 68mm.
    Blade thickness: 4mm.
    Length closed: 83mm.
    Total length: 135mm.
    Thick when closed: 12mm.
    balancing:
    Weight: 68 gr.
    Opening: -
    Washers: -
    Closure: Friction Folder (without block)
    Clip: titanium, removable
    Packaging: nylon bag with EOS logos
    Note: -

    EOS-P-A-B
    €118.85
    Only 1 left
    Only 1 left
  15. EOS Elite Outfitting Solutions - Orca S - Grey Titanium - knife

    Target: Tactical / EDC / Collection

    Type of production: artisanal seed
    Country of production: U.S.A.
    Blade: Steel CPM S35VN
    Blade treatment: -
    Handle: Anodized titanium with thickness of mm per folder
    Blade Length: 68mm.
    Blade thickness: 4mm.
    Closed length: 99mm.
    Total Length: 175mm.
    Closed thickness: 13mm.
    balancing:
    Weight:
    Opening: Flipper
    Washers: Steel ball bearings
    Closure: Framelock
    Clip: Titanium, Removable
    Packing: nylon bag with EOS logos
    Notes: -

    EOS-ORG
    Special Price €381.15 Regular Price €422.13
    Only 1 left
    Only 1 left
  16. Ontario Knife Company - RAT 7 Micarta - knife

    Intended use: tactical / sport
    Type of production: Industrial
    Country of Origin: USA
    Blade: full tang, steel 1095 black texture powder coated
    Handle: Micarta
    Blade length: 179mm.
    Blade thickness: 5mm.
    Overall length: 311mm.
    Balance: on guard branch
    Weight: 357g.
    Sheath: Nylon, with rigid internal
    Packaging: cardboard box with Ontatio Knife Company logos

    ON8668
    €122.95
    Only 1 left
    Only 1 left
    Rating:
    80%
    4
  17. Ontario Knife Company - RAT 3 Micarta - knife

    Intended use: tactical / sport
    Type of production: Industrial
    Country of Origin: USA
    Blade: full tang, steel 1095 black texture powder coated
    Handle: micarta
    Blade length: 95mm.
    Blade thickness: 4.5mm.
    Overall length: 270mm.
    Balance: on guard branch
    Weight: 147g.
    Sheath: ABS, coupling with Tek-Lok type or clip system
    Packaging: cardboard box with Ontatio Knife Company logos

    ON8665
    €98.36
    Only 2 left
    Only 2 left
    Rating:
    100%
    5
  18. Ontario Knife Company - 499 Air Force Survival Pilot knife - knife

    The Ontario Knife 6150, 499 Air Force Survival Knife, a classic among military blades, is still used today by the US military.

    Made in the USA

    Blade: 1095 carbon steel covered with epoxy powders
    Handle: leather discs
    Blade length: 127 mm.
    Blade thickness: 4 mm.
    Total length: 245 mm.
    Weight: 250 g.
    Sheath: Cordura and leather

    ON6150
    €86.07
    Only 1 left
    Only 1 left
    Rating:
    82%
    4.1
  19. Ontario Knife Company - RTAK2 Survival knife - knife

    Intended use: Outdoor


    Type of production: Industrial
    Lama production: USA
    Blade: 5160 carbon steel
    Blade treatment: Powder Coat
    Handle: Micarta
    Blade length: 265mm.
    Blade thickness: 4.7mm.
    Total length: 425mm.
    Balancing: -
    Weight: 622g.
    Sheath: in Nylon with MOLLE attachments.
    Packaging: cardboard box with Ontario Knife Company logos
    Note:

    ON8669
    €130.33
    Only 1 left
    Only 1 left
  20. Pohl Force - Bravo Two Classic - Black Two Tone ATS-34 - 1078 - knife

    To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.

    From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.

    It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.

    The Bravo Two Classic BK is equipped with a black fibreglass handle and a Tanto blade with an exciting two-tone finish (stonewashed/satin-finished lengthwise).


    Intended use: Tactical, collection
    Type of production: Industrial
    Blade: Hitachi ATS-34 stainless steel
    Blade finish: Dual Tone (stonewashed + satin-finished)
    Handle: GRP (glass-reinforced polyester)
    Blade length: 83mm.
    Blade thickness: 3.5mm.
    Total length: 195mm.
    Thickness when closed: 14mm.
    Weight: 120g.
    Closure: Back Lock
    Packaging: Cardboard box with Pohl Force logos
    Notes: Numbered and with certificate of authenticity with signature and date of manufacture

    PF-1078BK
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  21. Pohl Force - Bravo One Classic - Black Two Tone ATS-34 - 1076 - knife

    To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.

    From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.

    It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.

    The Bravo One Classic BK is equipped with a black fibreglass handle and a drop point blade with an exciting two-tone finish (stonewashed/longitudinal satin finish).


    Intended use: Tactical, collection
    Type of production: Industrial
    Blade: Hitachi ATS-34 stainless steel
    Blade finish: Dual Tone (stonewashed + satin-finished)
    Handle: GRP (glass-reinforced polyester)
    Blade length: 83mm.
    Blade thickness: 3.5mm.
    Total length: 195mm.
    Thickness when closed: 14mm.
    Weight: 120g.
    Closure: Back Lock
    Packaging: Cardboard box with Pohl Force logos
    Notes: Numbered and with certificate of authenticity with signature and date of manufacture

    PF-1076BK
    €172.13
    Only 0 left
    Only 0 left
    Out of stock
  22. Ontario Knife Company - RAT 3 Skinner Micarta - 8661 - knife

    Intended use: tactical/sporting

    Type of production: Industrial
    Country of manufacture: USA
    Blade: Fulltang, 1095 black textured powder coated steel
    Handle: Micarta
    Blade length: 95mm.
    Blade thickness: 3.5mm.
    Total length: 197mm.
    Balance: advanced
    Weight: 200g.
    Sheath: leather, for vertical carrying on belt
    Packaging: cardboard box with Ontatio Knife Company logos.

    ON8661
    €81.15
    Only 0 left
    Only 0 left
    Out of stock
  23. Pohl Force - Quebec Two Black TiNi - Limited Signature Edition - 2444S - knife

    Pohl Force's Quebec series is a classic mission knife that has been at the top of founder and designer Dietmar Pohl's wish list for many decades. In 2014, Pohl Force received exclusive permission from the original manufacturer to use the basic design for its interpretation.

    Developed as the Ground Forces Combat & General Purpose Weapon, the multi-purpose knife was designed for the U.S. Marine Corps in the early 1950s. Although it was never officially introduced, it clearly demonstrated its capabilities in the Vietnam War, especially in the hands of American special forces. Almost 70 years after its first design, the modern Pohl Force interpretation of this classic represents the perfect fusion of old-school classic design and modern high-tech production.

    Designer Dietmar Pohl has revised the design of the Quebec One and expanded the knife's range of functions. The blade of the new Quebec Two is now made of D2 steel instead of Sleipner, which brings higher levels of carbon and chromium, thus significantly improving cut and corrosion resistance. In addition, Dietmar Pohl has once again optimized the blade of the classic. The new version now has a 10 mm longer cutting edge and a secondary edge on the back.

    In addition, the Pohl Force Prepper System has been integrated into the handle of the Quebec Two to safely store survival items inside the handle. A tool to open the handle screws is included. Pohl Force's new scabbard system allows for greatly increased use. The highly elaborate sheath, made of 2.5-mm-thick Kydex, with belt adapter and leg strap, allows for high carrying comfort. To attach it to the hand, the Quebec Two is equipped with a lanyard.

    Total length: 315 millimeters
    Blade length: 190 millimeters
    Blade thickness: 6 mm
    Weight: 380g
    Blade material: D2 steel
    Blade finish: titanium nitriding
    Handle material: G-10
    Handle thickness: 24 mm
    Sheath: 2.5mm thick Kydex with Cordura belt hooks, removable
    Accessories included: Lanyard 

    Packaging: Cardboard box, warranty certificate
    Notes: Each knife is numbered and individually signed by DIetmar Pohl on the Kydex sheath

    PF2444S
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  24. Pohl Force - Quebec Two Stonewashed - Limited Signature Edition - 2443S - knife

    Pohl Force's Quebec series is a classic mission knife that has been at the top of founder and designer Dietmar Pohl's wish list for many decades. In 2014, Pohl Force received exclusive permission from the original manufacturer to use the basic design for its interpretation.

    Developed as the Ground Forces Combat & General Purpose Weapon, the multi-purpose knife was designed for the U.S. Marine Corps in the early 1950s. Although it was never officially introduced, it clearly demonstrated its capabilities in the Vietnam War, especially in the hands of American special forces. Almost 70 years after its first design, the modern Pohl Force interpretation of this classic represents the perfect fusion of old-school classic design and modern high-tech production.

    Designer Dietmar Pohl has revised the design of the Quebec One and expanded the knife's range of functions. The blade of the new Quebec Two is now made of D2 steel instead of Sleipner, which brings higher levels of carbon and chromium, thus significantly improving cut and corrosion resistance. In addition, Dietmar Pohl has once again optimized the blade of the classic. The new version now has a 10 mm longer cutting edge and a secondary edge on the back.

    In addition, the Pohl Force Prepper System has been integrated into the handle of the Quebec Two to safely store survival items inside the handle. A tool to open the handle screws is included. Pohl Force's new scabbard system allows for greatly increased use. The highly elaborate sheath, made of 2.5-mm-thick Kydex, with belt adapter and leg strap, allows for high carrying comfort. To attach it to the hand, the Quebec Two is equipped with a lanyard.

    Total length: 315 millimeters
    Blade length: 190 millimeters
    Blade thickness: 6 mm
    Weight: 380g
    Blade material: D2 steel
    Blade finish: stonewashed
    Handle material: G-10
    Handle thickness: 24 mm
    Sheath: 2.5mm thick Kydex with Cordura belt hooks, removable
    Accessories included: Lanyard 

    Packaging: Cardboard box, warranty certificate
    Notes: Each knife is numbered and individually signed by DIetmar Pohl on the Kydex sheath

    PF2443S
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  25. Pohl Force - Charlie Two SW - D2 steel - 6001 - knife

    With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Two covers a wide range of applications.

    The modern Spear Point blade and handle of the Charlie Two are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The Stonewashed finish creates a scratch-resistant surface and increases the blade's corrosion resistance.

    Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip. 

    The Charlie Two comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.

     


    Intended Use: Tactical/Sporting

    Blade: Full tang made of D2 steel at 59/60HRC with Stonewashed finish
    Handle: -
    Blade length: 95mm.
    Blade thickness: 6mm.
    Total length: 210mm.
    Weight: 152g.
    Sheath: made of kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
    Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signed

    PF-6001
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  26. Pohl Force - Charlie Two BK TiNi - D2 steel - 6002 - knife

    With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Two covers a wide range of applications.

    The modern Spear Point blade and handle of the Charlie Two are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The surface of the handle and blade is coated with a black titanium nitriding.

    Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip. 

    The Charlie Two BK comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.

     


    Intended Use: Tactical/Sporting

    Blade: Full tang made of D2 steel at 59/60HRC with TiNi coating
    Handle: -
    Blade length: 95mm.
    Blade thickness: 6mm.
    Total length: 210mm.
    Weight: 152g.
    Sheath: kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
    Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signed

    PF-6002
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  27. Pohl Force - Charlie Three BK TiNi - D2 steel - 6012 - knife

    With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Three covers a wide range of applications.

    The modern Spear Point blade and handle of the Charlie Three are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The surface of the handle and blade is coated with a black titanium nitriding.

    Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip. 

    The Charlie Three BK comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.

     


    Intended Use: Tactical/Sporting

    Blade: Full tang made of D2 steel at 59/60HRC with TiNi coating
    Handle: -
    Blade length: 95mm.
    Blade thickness: 6mm.
    Total length: 210mm.
    Weight: 152g.
    Sheath: kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
    Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signed

    PF-6012
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  28. Ontario Knife Company - Hiking Knife - 8187 - bushcraft knife

    Intended Use: Utility / Bushcrat / Hunting

    Production type: Industrial
    Country of Production: USA
    Blade: 420HC stainless steel full tang
    Blade treatment: Satin finish
    Handle: Micarta Mossy Oak
    Blade length: 86mm.
    Blade thickness: 3.5mm.
    Total length: 210mm. 
    Balance: on the guard branch
    Weight: 148g.
    Scabbard: Belt, leather, for vertical carrying.
    Packaging: Cardboard box with OKC logos
    Notes: -

    ON8187
    €77.87
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  29. Ontario Knife Company - Spec Plus SP-1 Combat Knife - 8679 - tactical knife

    Intended Use: Tactical / Military

    Production type: Industrial
    Country of Production: USA
    Blade: hidden tang in 1075 carbon steel
    Blade treatment: powder coating
    Handle: kraton
    Blade length: 178mm.
    Blade thickness: 4.5mm.
    Total length: 308mm. 
    Balancing: advanced
    Weight: 286g.
    Scabbard: Belt, nylon, for vertical carrying.
    Package: Cardboard box with OKC logos
    Notes: -

    ON8679
    €69.67
    Only -20 left
    Only -20 left
    Out of stock
  30. Ontario Knife Company - MOD Mark 3 Navy Dive Knife - 6141 - knife

    Intended Use: Multirole / Tactical

    Production type: Industrial
    Country of Production: USA
    Blade: hidden tang in 1095 carbon steel
    Blade treatment: Phosphated
    Handle: Thermoplastic, with steel tang and guard
    Blade length: 152mm.
    Blade thickness: 4mm.
    Total length: 282mm. 
    Balance: backward
    Weight: 294g.
    Scabbard: thermoplastic, with steel inner lock and Cordura back loop.
    Package: Cardboard box with OKC logos
    Notes: Knife produced and used for many decades by the U.S. naval forces.

    ON6141
    €146.72
    Only 0 left
    Only 0 left
    Out of stock
  31. Ontario Knife Company - Spec Plus SP-6 Fighting Knife - 8682 - tactical knife

    Intended use: Tactical / Military

    Type of production: Industrial
    Country of production: USA
    Blade: 1095 carbon steel hidden tang
    Blade treatment: epoxy powders
    Handle: in kraton
    Blade length: 200mm.
    Blade thickness: 5mm.
    Total length: 330mm.
    Balancing: on the guard branch
    Weight: 323g.
    Sheath: belt, in cordura and leather, vertical carry
    Packaging: Cardboard box with OKC logos
    Note: -

    ON8682
    €57.38
    Only -20 left
    Only -20 left
    Out of stock
  32. Pohl Force - Compact One BK TiNi - D2 steel - 6022 - knife

    With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.

    The focus is on the massive, classic Bowie blade of the Compact One, which is 88 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The surface of the blade has a tactical, non-reflective TiNi titanium nitriding coating that provides excellent protection against external corrosives.

    The reduced handle design is the basis for the knife's very compact size. The pleasantly rounded tang and cleverly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.

    The Compact One BK is equipped with a robust, high-quality Kydex sheath in black. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.

     


    Intended use: Tactical / Sporting

    Blade: Full tang in D2 steel at 59/60HRC with TiNi coating
    Handle: In G-10
    Blade length: 88mm.
    Blade thickness: 6mm.
    Total length: 170mm.
    Weight: 165g.
    Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
    Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.

    PF-6022
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  33. Pohl Force - Tactical Nine BK knife - D2 steel - 5015 - knife

    Based on the well-known MK-9, designer Dietmar Pohl has developed the new Tactical Nine. Reduced in weight and more compact in size, the Tactical Nine Black is still a full-fledged knife.

    The sturdy 20cm long and 6mm thick spear point blade is suitable for a wide range of applications. For high edge retention and blade resilience, the choice fell on the well-known D2 tool steel.

    The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion. The step-shaped grip design offers an excellent and secure grip. For powerful or delicate work, the pronounced and also rounded finger recess in front of the guard allows the knife to lean forward. A hidden hole in the end of the handle offers the possibility to mount a lanyard (included).

    The Kydex sheath of the Tactical Nine Black has a material thickness of 2.5mm which provides the basis for a well thought out and durable carrying system which fully meets the high demands placed in practice on a tactical knife. A leg strap, infinitely adjustable in size, with snap closure allows it to be fixed to the thigh of the wearer.

    Intended use: Collection / Sports

    Blade: Full tang in D2 steel at 59 / 60HRC
    Handle: In G-10
    Blade length: 200mm.
    Blade thickness: 6mm.
    Total length: 345mm.
    Weight: 482g.
    Sheath: in kydex
    Packaging: 3D certified numbered patch

    PF-5015
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  34. Pohl Force - Tactical Eight BK knife - D2 steel - 5014 - knife

    Based on the well-known MK-8, designer Dietmar Pohl has developed the new Tactical Eight Black. Reduced in weight and more compact in size, the Tactical Eight Black is still a knife in all respects, versatile for professional users.

    The sturdy Bowie blade over 17cm long and 6mm thick is suitable for a wide range of applications. For high edge retention and blade resilience, the choice fell on the well-known D2 tool steel.

    The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion. A hidden hole at the end of the grip offers the possibility to mount a lanyard (included).

    The Kydex® sheath of the Tactical Eight Black with a material thickness of 2.5 millimeters provides the basis for a well thought-out and durable carrying system that fully meets the high demands placed on a tactical knife in practice.

    Intended use: Collection / Sports

    Blade: Full tang in D2 steel at 59 / 60HRC
    Handle: In G-10
    Blade length: 174mm.
    Blade thickness: 6mm.
    Total length: 315mm.
    Weight: 375g.
    Sheath: in kydex
    Packaging: box with numbered certificate

    PF-5014
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  35. Pohl Force - Tactical Eight SW knife - D2 steel - knife

    Based on the well-known MK-8, designer Dietmar Pohl has developed the new Tactical Eight. Reduced in weight and more compact in size, the Tactical Eight is still a knife in all respects, versatile for professional users.

    The sturdy 17.4cm long and 6mm thick Bowie blade is suitable for a wide range of applications. For high edge retention and blade resilience, the choice fell on the well-known D2 tool steel.

    The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion. A hidden hole at the end of the grip offers the possibility to mount a lanyard (included).

    The Kydex® sheath of the Tactical Eight with a material thickness of 2.5mm provides the basis for a well thought-out and durable carrying system that fully meets the high demands placed on a tactical knife in practice.

    Intended use: Collection / Sports

    Blade: Full tang in D2 steel at 59 / 60HRC
    Handle: In G-10
    Blade length: 170mm.
    Blade thickness: 6mm.
    Total length: 315mm.
    Weight: 375g.
    Sheath: in kydex
    Packaging: box with numbered certificate

    PF-5004
    €0.00
    Only 0 left
    Only 0 left
    Out of stock
  36. Pohl Force - Tactical Nine SW knife - D2 steel - knife

    Basato sul noto MK-9, il designer Dietmar Pohl ha sviluppato il nuovo Tactical Nine. Ridotto nel peso e più compatto nelle dimensioni, il Tactical Nine è comunque un coltello a tutti gli effetti.

    La robusta lama spear point lunga 20 centimetri e spessa 6 millimetri è adatta per un'ampia gamma di applicazioni. Per un'elevata ritenzione del filo e resilienza della lama, la scelta è ricaduta sul noto acciaio per utensili D2.

    La finitura stonewashed crea una superficie antigraffio e aumenta anche la resistenza della lama alla corrosione. Il design delle guancette a forma di gradino offorno una presa eccellente e sicura. Per lavori potenti o delicati, l'incavo delle dita pronunciato e anche arrotondato davanti alla protezione consente al coltello di protendersi in avanti. Un foro nascosto all'estremità della maniglia offre la possibilità di montare un cordino (incluso).

    Il fodero in Kydex del Tactical Nine ha uno spessore del materiale di 2,5 millimetri che fornisce la base per un sistema di trasporto ben congegnato e resistente e che soddisfa pienamente le elevate esigenze poste in pratica su un coltello tattico. Un cosciale, regolabile all'infinito nelle dimensioni, con chiusura a scatto consente di fissarlo alla coscia di chi lo indossa. 

    Destinazione d'uso: Collezione/Sportivo

    Lama: Full tang in acciaio D2 a 59/60HRC
    Impugnatura: In G-10
    Lunghezza lama: 200mm.
    Spessore lama: 6mm.
    Lunghezza totale: 345mm.
    Peso: 482g.
    Fodero: in kydex
    Confezione: Patch 3D certificato numerato

    PF-5005
    €0.00
    Only 0 left
    Only 0 left
    Out of stock
  37. Ontario Knife Company - SP53 Bolo Knife - 8689 - knife

    Designed by Dan Maragni, the Ontario SP53 Bolo Knife features a 25cm bolo-style blade made of 5160 steel with an epoxy powder coating. The Bolo SP53 knife comes complete with a MOLLE compatible black tactical sheath and is made in the USA.

    Intended use: Hard Utility / Survival

    Type of production: Industrial
    Country of production: USA
    Blade: full tang in 5160 Carbon Steel
    Blade treatment: epoxy powders
    Handle: in kraton
    Blade length: 257mm.
    Blade thickness: 6.4mm.
    Total length: 384mm.
    Balancing: advanced
    Weight: 940g.
    Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
    Packaging: Cardboard box with OKC logos
    Note: -

    ON8689
    €89.34
    Only 0 left
    Only 0 left
    Out of stock
  38. Ontario Knife Company - TAK 2 knife - leather sheath - 8664 - knife

    The TAK 2 is a fixed blade knife ideal for hunting, camping, survival and many other outdoor applications. The TAK 2 knife features a high carbon steel blade and a stabilized hardwood handle.
    Intended use: Tactical / Military

    Type of production: Industrial
    Country of production: USA
    Blade: 1075 carbon steel hidden tang
    Blade treatment: Powder Coat
    Handle: in kraton, with steel tang
    Blade length: 116mm.
    Blade thickness: 4.8mm.
    Total length: 250mm.
    Balance: 4cm back
    Weight: 275 g.
    Sheath: in leather
    Packaging: Cardboard box with OKC logos
    Note:

    ON8664
    €113.93
    Only 0 left
    Only 0 left
    Out of stock
  39. Ontario Knife Company - SP24 USN-1 Survival Knife - 8688 - knife

    The SP24 USN-1 survival knife is one of Ontario Knife Company's Spec Plus series models. Designed for military use but practical enough as a survival knife, camping knife or even hunting knife. In addition to the serrations on both sides, there is also a rope cutter on the blade of the knife. As with all Spec Plus, the SP24 USN-1 survival knife is made in the United States.
    Intended use: Tactical / Military

    Type of production: Industrial
    Country of production: USA
    Blade: 1075 carbon steel hidden tang
    Blade treatment: Powder Coat
    Handle: in kraton, with steel tang
    Blade length: 127mm.
    Blade thickness: 4.8mm.
    Total length: 245mm.
    Balancing: 3cm back
    Weight: 225g.
    Sheath: nylon, modular, compatible with M.O.L.L.E.
    Packaging: Cardboard box with OKC logos
    Note:

    ON8688
    €58.20
    Only -20 left
    Only -20 left
    Out of stock
  40. Pohl Force - MK-9 Last Blood Heartstopper - Rambo 5 CNC² Edition - knife

    With the Pohl Force MK-8 and MK-9 knives at its side, the legendary Rambo series (1982-2019), which like no other has made the knife the most important part of its equipment on the big screen, comes to an end.

    The Pohl Force LAST BLOOD® CNC² Edition MK-9 is a perfectly designed knife in the eye-catching Spear Point style that looks like a modern, tactical tool in the unmistakable Pohl design.

    Only strong and high quality materials are used for its manufacturing: the stainless steel 90Cr18MoV (440C) hardened at 57/58HRC gives the 23cm long and 6mm thick blade a high corrosion resistance and an excellent edge retention. The full tang construction is topped with a micarta handle that ends in an aesthetic element that can be used as a striking tool.

    The micarta machining gives the handle a distinctive look with three-dimensional millings, and the handle and blade are visually connected by a CNC-milled guard machined from a solid block of stainless steel. A subhilt on the underside of the handle provides maximum control in handling the blade giving the MK-9 a distinctive look. It is completed by the ever-present knotted camouflage paracord lanyard that distinguishes all Pohl Force productions and matches exactly the same paracord used in the filming of the movie.

    The knife comes with a leather sheath of the highest quality and is sold with a 3D Velcro patch and a cloth for care and cleaning.

    Intended Use: Collection

    Blade: Full tang stainless steel 90Cr18MoV (440C) at 57/58HRC
    Handle: Micarta
    Blade length: 230mm.
    Blade thickness: 6mm.
    Total lenght: 380mm.
    Weight: 658g.
    Scabbard: Leather
    Packaging: 3D Velcro patch - Cleaning cloth

    PF-5003
    €0.00
    Only -97 left
    Only -97 left
    Rating:
    100%
    5
    Out of stock
  41. Pohl Force - MK-8 Last Blood Bowie - Rambo 5 CNC² Edition - knife

    With the Pohl Force MK-8 and MK-9 knives at its side, the legendary Rambo series (1982-2019), which like no other has made the knife the most important part of its equipment on the big screen, comes to an end.

    The Pohl Force LAST BLOOD® CNC² Edition MK-8 is a perfectly designed knife in the classic Bowie style that, despite its historical roots, presents itself as a modern, tactical tool in the unmistakable Pohl design.

    Only high quality, durable materials are used in its construction: Stainless steel 90Cr18MoV (440C) hardened to 57/58HRC gives the 20cm long, 6mm thick Bowie blade high corrosion resistance and excellent edge retention. The full tang construction culminates in a G-10 handle that finishes with a unique aesthetic element that impresses with its dramatic design.

    The black surface with three-dimensional millings on the handle contrasts colourfully with the blade in a two-tone finish. The handle and blade are visually connected by a CNC-milled guard machined from a solid block of stainless steel. It is completed by the ever-present knotted paracord camouflage lanyard that distinguishes all Pohl Force productions and corresponds exactly to the same paracord used in the filming of the movie.

    The knife comes with a top-quality leather sheath and is sold with a 3D Velcro patch and a cloth for care and cleaning.

    Intended use: Collection

    Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57/58HRC
    Handle: In G-10
    Blade length: 200mm.
    Blade thickness: 6mm.
    Total length: 350mm.
    Weight: 538g.
    Scabbard: Leather
    Packaging: 3D Velcro patch - Cleaning cloth

    PF-5002
    €0.00
    Only -99 left
    Only -99 left
    Out of stock
  42. Pohl Force - MK-9 Last Blood Heartstopper - Rambo 5 CNC² Edition - Kydex Set - knife

    With the Pohl Force MK-8 and MK-9 knives at its side, the legendary Rambo series (1982-2019), which like no other has made the knife the most important part of its equipment on the big screen, comes to an end.

    The Pohl Force LAST BLOOD® CNC² Edition MK-9 is a perfectly designed knife in the eye-catching Spear Point style that looks like a modern, tactical tool in the unmistakable Pohl design.

    Only strong and high quality materials are used for its manufacturing: the stainless steel 90Cr18MoV (440C) hardened at 57/58HRC gives the 23cm long and 6mm thick blade a high corrosion resistance and an excellent edge retention. The full tang construction is topped with a micarta handle that ends in an aesthetic element that can be used as a striking tool.

    The micarta machining gives the handle a distinctive look with three-dimensional millings, and the handle and blade are visually connected by a CNC-milled guard machined from a solid block of stainless steel. A subhilt on the underside of the handle provides maximum control in handling the blade giving the MK-9 a distinctive look. It is completed by the ever-present knotted camouflage paracord lanyard that distinguishes all Pohl Force productions and matches exactly the same paracord used in the filming of the movie.

    The knife comes with a high quality thermoformed Kydex® sheath with belt loop and thigh stopper and is sold with a certificate of manufacture, a 3D Velcro patch, a care and cleaning cloth and a Nylon Zip bag with Pohl Force logos.

    Each knife is numbered on both the blade and certificate.

     

    Intended use: Collection

    Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57/58HRC
    Handle: Micarta
    Blade length: 230mm.
    Blade thickness: 6mm.
    Total lenght: 380mm.
    Weight: 658g.
    Scabbard: Thermoformed, in Kydex
    Package: Warranty certificate with serial number - 3D Velcro patch - Cleaning cloth - Soft Nylon pouch with zipper and Pohl Force logos.

    PF-5113
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  43. Pohl Force - MK-8 Last Blood Bowie - Rambo 5 CNC² Edition - Kydex Set - knife

    With the Pohl Force MK-8 and MK-9 knives at its side comes the conclusion of the legendary Rambo series (1982-2019), which like no other has made the knife the most important part of its equipment on the big screen.

    The Pohl Force LAST BLOOD® CNC² Edition MK-8 is a perfectly designed knife in the classic Bowie style that despite its historical roots presents itself as a modern, tactical tool in the unmistakable Pohl design.

    Only high quality and resistant materials are used for its production: the stainless steel 90Cr18MoV (440C) hardened at 57/58HRC gives to the Bowie blade, 20cm long and 6mm thick, a high resistance to corrosion and an excellent edge retention. The full tang construction culminates in a G-10 handle that ends in a unique aesthetic element that impresses with its dramatic design.

    The black surface with three-dimensional millings on the handle sits in chromatic contrast to the two-tone finish blade. The handle and blade are visually connected by a CNC-milled guard machined from a solid block of stainless steel. It is completed by the ever-present knotted camouflage paracord lanyard that distinguishes all Pohl Force productions and matches exactly the same paracord used in the filming of the movie.

    The knife comes with a high quality thermoformed Kydex® sheath with belt loop and thigh stopper and is sold with a certificate of manufacture, a 3D Velcro patch, a care and cleaning cloth and a Nylon Zip bag with Pohl Force logos.

    Each knife is numbered on both the blade and certificate.

     

    Intended use: Collection

    Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57/58HRC
    Handle: In G-10
    Blade length: 200mm.
    Blade thickness: 6mm.
    Total length: 350mm.
    Weight: 538g.
    Scabbard: Thermoformed, in Kydex
    Package: Warranty certificate with serial number - 3D Velcro patch - Cleaning cloth - Soft Nylon pouch with zipper and Pohl Force logos.

    PF-5112
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  44. Ontario Knife Company - Spec Plus SP5 Bowie Survival - 8681 - knife

    Intended use: Hard Utility / Survival

    Type of production: Industrial
    Country of production: USA
    Blade: full tang in 1095 carbon steel
    Blade treatment: epoxy powders
    Handle: in kraton
    Blade length: 250mm.
    Blade thickness: 6mm.
    Total length: 380mm.
    Balancing: advanced
    Weight: 425g.
    Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
    Packaging: Cardboard box with OKC logos
    Note: -

    ON8681
    €73.77
    Only -20 left
    Only -20 left
    Rating:
    80%
    4
    Out of stock
  45. Ontario Knife Company - Old Hickory Butcher Knife - 7113 - knife

    Ontario Knife Company - Old Hickory Butcher Knife - 7113 - knife
    Known for their robust longevity in countless practical applications, Ontario's famous Old Hickory knives have been a go-to for cooking and outdoor enthusiasts for over 95 years.

    Intended use: Hiking / Camp / Meat / Barbecue

    Type of production: Industrial
    Country of production: USA
    Blade: carbon steel 1095 57-59 HRC
    Blade treatment: satin finish
    Handle: wood
    Blade length: 360mm.
    Blade thickness: 2.5mm.
    Total length: 500mm.
    Weight: 412g.
    Sheath: without sheath
    Packaging: without packaging
    Notes: To make the knife sharper, through our internal laboratory, we further sharpen each blade before shipping.

    CARE AND MAINTENANCE: This product uses a NON stainless steel with a high carbon content - it is therefore recommended to wash it under running water and dry it immediately manually with a clean cotton cloth or absorbent paper. To avoid the formation of rust and oxidation it is also highly recommended, after having dried it well, to protect the blade with a lubricant (eg grease, paraffin, lanolin, vaseline) that creates a protective barrier between the steel and the atmosphere.

    ON7113
    €31.97
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  46. Ontario Knife Company - Hunting Knife with leather sheath - 7026 - knife

    Known for their robust longevity in countless practical applications, Ontario's famous Old Hickory knives have been a go-to for cooking and outdoor enthusiasts for over 95 years. In line with the Old Hickory design, this hunting knife features a 1095 carbon steel blade and wooden handle, making it perfect for hunting and outdoor use. As with all Old Hickory models, this knife also features a wooden handle with brass rivets. Both the fillet knife and the leather sheath are made in the USA.

    Intended use: Fishing / Hunting

    Type of production: industrial
    Country of production: USA
    Blade: carbon steel 1095 57-59 HRC
    Blade treatment: satin finish
    Handle: wood
    Blade length: 140mm.
    Blade thickness: 2mm.
    Total length: 260mm.
    Sheath: in leather
    Packaging: Ontario official box
    Note: To make the knife sharper, through our in-house laboratory, we further sharpen each blade before shipping.

     

    CARE AND MAINTENANCE: it is recommended to wash it under running water and dry it immediately manually with a clean cotton cloth or absorbent paper.

    ON7026
    €36.89
    Only 0 left
    Only 0 left
    Out of stock
  47. Ontario Knife Company - Fish and Small Game Knife with leather sheath - 7024 - knife

    Known for their rugged longevity in countless practical applications, Ontario's famous Old Hickory knives have been a go-to for cooking and outdoor enthusiasts for over 95 years. This model, thanks to its small size and ease of use, is ideal for processing fish and small game animals. It features an 8.5cm stainless steel blade with a satin finish. As with all Old Hickory models, this knife also features a wooden handle with brass rivets. Both the fillet knife and the leather sheath are made in the USA.

    Intended use: Fishing / Hunting
    Type of production: Industrial
    Country of production: USA
    Blade: carbon steel 1095 57-59 HRC
    Blade treatment: satin finish
    Handle: wood
    Blade length: 100mm.
    Blade thickness: 2mm.
    Total length: 220mm.
    Sheath: in leather
    Packaging: Ontario official box
    Notes: To make the knife sharper, through our internal laboratory, we further sharpen each blade before shipping.

     

    CARE AND MAINTENANCE: it is recommended to wash it under running water and immediately dry it manually with a clean cotton cloth or absorbent paper.

    ON7024
    €36.89
    Only 0 left
    Only 0 left
    Out of stock
  48. Ontario Knife Company - Journeyman knife 6155 - tactical knife

    Made from the very famous 499 Pilot's Survival Knife (Air Force Survival Knife), the OKC Journeyman Knife is ideal for outdoor activities. The OKC Journeyman knife features a sturdy 10cm blade with a sawn back, made from 1095 high carbon steel with a black phosphated finish. The Ontario Journeyman Knife comes with a leather sheath and is entirely made in the USA.

    Intended use: tactical / sports
    Type of production: Industrial
    Country of production: USA
    Blade: 1095 black texture powder coated steel
    Handle: leather discs
    Blade length: 10mm.
    Blade thickness: 4.5mm.
    Total length: 217mm.
    Balancing: 2 cm back from the guard branch
    Weight: 252g.
    Sheath: in leather
    Packaging: cardboard box with Ontatio Knife Company logos

    ON6155
    €40.16
    Out of stock
Set Ascending Direction

Items 1-48 of 138

Page




ecommerce sicuro