Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No since 2014
* Sharpening: Original
* Marks on blade: No
* Marks on handle: No
* Box: NOT present
* Checked and certified by our internal laboratory

Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim Vagner

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

* Type: Previously purchased and used. 
* Condition: Very good condition, with a few small marks on blade and handle.
* Commercially available: Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small, unnoticeable scratches on the tip of the blade.
* Marks on handle: A small mark near the clip housing.
* Packaging: Yes
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Production Type: Industrial
Country of Production: China (by Reate Knives)
Blade: Elmax stainless steel
Blade finish: satin finish
Handle: green cavnas micarta with brass spacer
Blade length: 87mm.
Blade thickness: 3.5mm.
Length closed: 114mm
Total length: 203mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: cardboard box with Giant Mouse logos
Notes: discontinued knife, winner of the "2023 BEST EDC CHAMPION" award by Carryology

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratory

Intended use: Regional

Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -

In designing the Belone, Danish Jesper Voxnaes started from typical lines of the Italian regional tradition, perfectly reworked according to his modern, minimalist style that has made him famous worldwide. The result is a light, tapered folding knife embellished with refined details, such as the holes in the back of the handle.
The Böhler M390 Microclean steel gives the Belone excellent cutting qualities, and the ball bearings make it the fastest flipper opening, perfectly integrated into the overall design. The carefully crafted ergonomically designed handle has an anodized titanium frame enclosed between thin carbon fiber folders. The Belone's clip is attached to the spacer so that the knife disappears completely into the pocket, maintaining maximum discretion.

Intended Use: Sporting / EDC

Production type: Industrial
Country of manufacture: Italy
Blade: Stainless steel M390 60-61HRC
Blade Treatment: Satin finish
Handle: Stonewashed titanium and forged carbon fiber "Dark Matter" in blue color
Blade length: 85mm.
Blade thickness: 3.4mm.
Length closed: 114mm.
Total length: 200mm.
Thickness when closed:11.3mm.
Weight: 78g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Enthusiasts know the value of a good knife. Viper honors this idea with its high-quality EDC knife, called Vale, made from select materials. The MagnaCut blade opens gently thanks to the thumb stud and is locked in place by the sturdy liner lock. The titanium handle features three-dimensional machining, offering a pleasant feel and safe work. The anodized titanium backspacer completes the knife's harmonious appearance.

Intended Use: EDC

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut steel
Blade Finish: Satin
Handle: Anodized titanium
Blade length: 75mm (cutting edge of 68mm.)
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 184mm.
Thickness when closed:15mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium 
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Enthusiasts know the value of a good knife. Viper honors this idea with its high-quality EDC knife, called Vale, made from select materials. The MagnaCut blade opens gently thanks to the thumb stud and is locked in place by the sturdy liner lock. The titanium handle features three-dimensional machining, offering a pleasant feel and safe work. The anodized titanium backspacer completes the knife's harmonious appearance.

Intended Use: EDC

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut steel
Blade Finish: Satin
Handle: Anodized titanium
Blade length: 75mm (cutting edge of 68mm.)
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 184mm.
Thickness when closed:15mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium 
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife from the 1990s, previously purchased.
* Condition: In very good condition
* Commercially available: discontinued
* Sharpening: Factory sharpened
* Marks on blade: Small marks given by time.
* Marks on handle: None
* Box: -
* Scabbard: Present, but presumably not original although fully compatible.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8A
Blade Finish: Satin finish
Handle: Kraton
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 263mm.
Balance: advanced
Weight: 225g.
Scabbard: brown leather, belt-mounted, presumably not original but fully compatible
Packaging: -
Notes: previously purchased knife, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: some minor scuffs and hairlines on the right side
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Collection

Production type: MidTech
Country of manufacture: USA
Blade: stainless rolled damascus with wave design, 45-ply and ZDP-189 cutting edge
Blade finish: -
Handle: titanium with blue anodized and topaz set
Blade length: 79mm.
Blade thickness: 2.3mm.
Length closed: 100mm.
Total length: 180mm.
Weight: 57g.
Closure: Button Lock with embedded topaz
Sheath: leather, with stainless steel clip
Packaging: cardboard box with William Henry logos and warranty certificate
Notes: previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased 
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in excellent condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.

Designed specifically for the seven Mercury Program astronauts, the Model 17 accompanied these pioneers on the United States' first manned space flights. Astronaut Gordon Cooper contributed to the final design of this knife, making it not only a survival tool, but also a piece of history. Two examples of this knife, rich in historical value, are currently on display at the Smithsonian Institution.

Intended use: utility/military

Type of production: handcrafted
Country of manufacture: USA
Blade: 440B stainless steel
Blade finish: satin-finished
Handle: micarta, brass and duralumin
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 256mm.
Balance: on the guard branch
Weight: 252g.
Sheath: Black Leather
Notes: previously purchased knife, withdrawn from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratory

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratory

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel N690Co hardened to 59/60 HRC
Blade finish: satin finish
Handle: Snakewood - 416 stainless steel guard and pommel
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 240mm.
Weight: 185g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from a private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.

Designed by master designer Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock," a locking mechanism that is activated by a button on the handle. This type of lock provides a secure and reliable lock for the blade. 

A state-of-the-art steel such as MagnaCut was chosen for the blade: a high-strength steel known for its hardness and edge retention capacity. Thanks to these properties, the blade is able to tackle a variety of tasks without any problems. 

The handle has an ergonomic and comfortable grip. The 3D finish gives the handle a unique look and provides a secure grip during use. The handle is precisely designed to fit the shape of the hand, ensuring optimal control of the knife.

Intended Use: Sporting

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade finish: Satin finish
Handle: Dark Matter Carbon Fiber in Green color, double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (cutting edge of 75mm.)
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

Designed by master designer Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock," a locking mechanism that is activated by a button on the handle. This type of lock provides a secure and reliable lock for the blade. 

A state-of-the-art steel such as MagnaCut was chosen for the blade: a high-strength steel known for its hardness and edge retention capacity. Thanks to these properties, the blade is able to tackle a variety of tasks without any problems. 

The handle has an ergonomic and comfortable grip. The 3D finish gives the handle a unique look and provides a secure grip during use. The handle is precisely designed to fit the shape of the hand, ensuring optimal control of the knife.

Intended Use: Sporting

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade Finish: Stonewashed
Handle: Natural Canvas Micarta, double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (75mm. cutting edge).
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

Designed by master knife maker Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock."

The handle uses the brand new UltreX SureTouch composite in modified G-10.

SureTouch is a revolutionary new patent-pending process that combines layers of G-10 with rubber. Now you can have the strength and durability of G-10 with the grip and non-slip properties of rubber, all in one material. 

The combination of G-10 and rubber offers one of the most revolutionary advantages on the market. Because G10 is commonly processed for the knife and gun industry, this new material allows for greater ease of use. SureTouch allows for improved grip and comfort.

Intended Use: Sporting

Type of production: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade finish: Stonewashed
Handle: UltreX SureTouch (modified G10 with rubberized, non-slip exterior) with double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (cutting edge of 75mm.)
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1990 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade; artisan passed away in 2013
* Sharpening: Factory sharpening, can be improved.
* Marks on blade: A few small oxidation marks on handle.
* Marks on handle: A few small marks on steel bolsters due to time.
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks from time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: USA
Blade: full tang, handcrafted carbon damascus steel
Handle: stainless steel heads and giraffe bone handles
Blade length: 104mm
Blade thickness: 3mm.
Total length: 196mm.
Weight: 94g.
Sheath: Leather, for belt or boot, with steel clip for attachment
Packaging: -
Notes: rare handcrafted knife made in 1990 by well-known American knife maker Tommy Lee

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 03/1990 model, in like-new condition
* Commercially available: Unique knife, entirely custom made and hand-engraved
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house workshop

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: Germany
Blade: stainless steel CPM-T440V at 60HRC
Blade finish: mirror polish
Handle: integral from solid, fully hand-engraved, with fossil ivory grips and red micarta spacers
Blade length: 93mm
Blade thickness: 4mm.
Total length: 203mm.
Weight: 99g.
Sheath: Leather
Packaging: -
Notes: rare handcrafted knife made in March 1990 by well-known German knifemaker Peter Herbs, a member of the German Knifemakers' Guild and a member of the very prestigious American Knifemakers' Guild.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 12/1990 model, overall in good condition, with a few small marks from time
* Commercially available: Limited edition, numbered model, made entirely by hand; craftsman passed away in 2009
* Sharpening: Re-sharpened, a few small marks on blade due to sharpening
* Marks on blade: A few small marks
* Marks on handle: A few hairlines on the bolsters and a small dent on the left micarta handle.
* Box: -
* Scabbard: Suede leather case.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house laboratory

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: USA
Blade: stainless steel ATS34
Blade finish: satin finish
Handle: Stainless steel and Micarta
Blade length: 83mm
Blade thickness: 2.5mm.
Length closed: 108mm.
Total length: 189mm.
Thickness when closed: 8mm.
Weight: 99g.
Closure: Back Lock
Clip: -
Sheath: Suede leather pouch
Packaging: -
Notes: rare handcrafted knife made in December 1990 by noted U.S. knife maker Frank Centofante who passed away in 2009, serial number #049

Type: Previously Purchased
Condition: in excellent condition
Available in the market, currently in production
Sharpening: Factory standard
Blade marks: None
Handle marks: None
Box: Present
Sheath: Not applicable
Manuals, Certificates, and Warranties: ER
Checked and Certified by our internal laboratory
Intended use: Tactical/Emergency

Type of production: Industrial
Blade Production: Italy
Blade: N690Co stainless steel, 58HRC
Blade Treatment: Testudo
Handle: Anticorodal
Blade length: 95mm
Blade thickness: 4mm
Closed length: 134mm
Total length: 225mm
Closed thickness: 24mm
Balance: Not applicable
Weight: 162g
Closure: Liner Lock
Clip: Stainless Steel
Sheath: Not applicable
Packaging: black cardboard box with Extrema Ratio logos
Notes: seat belt cutter, glass breaker, screwdriver for optics

Type: Previously purchased and used
Condition: In excellent condition
Availability: Available for purchase
Sharpening: Resharpened
Blade marks: NO
Handle marks: small marks on the clip
Box: Original and present, made of cardboard
Sheath: Not included
Manuals, Certificates, and Warranties: Included
Inspected and Certified by our internal laboratory
Usage: Sports/Collection

Type of production: Industrial
Country of production: Italy
Blade: Bohler M390 steel 60/61HRC
Blade finish: Bead blasted and matt
Handle: Carbon Fiber and Titanium
Blade length: 74mm
Blade thickness: 3.5mm
Total length: 175mm
Weight: 62g
Lock: Titanium Frame Lock with steel stopper
Clip: 6Al4V Titanium
Packaging: Cardboard box with LionSteel logos
Notes: IKBS ball-bearing opening with Carson flipper system

Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Satin
Handle: Carbon fiber with 3D processing
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 122g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearing

Intended Use: Tactical/Sporting

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel Elmax SuperClean 59/61HRC
Blade Finish: Satin finish
Handle: carbon fiber and stainless steel damascus effect handle, 1.4116 stainless steel liners and GR2 titanium spacer
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 210mm.
Weight: 145g.
Closure: liner lock with integrated Smart Automatic Safe Lock System.
Clip: stainless steel 1.4116, removable and reversible
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio "Silvester" Silvestrelli

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased and Used
Conditions: In excellent conditions
Available in the market: Out of production since 2010
Sharpening: Factory
Marks on blade: NO
Marks on handle: NO
Box: Present
Sheath: -
Manuals, Certificates, and Warranties: No
Checked and Certified by our internal laboratory
Intended use: Sport / Collection

Type of production: Industrial
Blade Production: USA
Blade: In CPM-S30V stainless steel
Blade finish: Satin
Handle: G10
Blade Length: 87mm.
Blade Thickness: 3.5mm.
Closed Length: 122mm.
Total Length: 210mm.
Weight: 110g.
Closure: Compression Lock
Clip: Painted stainless steel
Packaging: Cardboard box with Spyderco logos
Notes:

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Condition: in excellent condition
Available in commerce: NO
Sharpening: Original
Marks on blade: YES - small marks
Marks on handle: NO
Packaging: YES, original box
Checked and Certified by our internal laboratory
Intended use: Tactical/Military

Type of production: Industrial
Country of production: USA
Blade: In stainless steel 154CM
Blade finish: Tungsten DLC Coating
Handle: G10 with stainless steel liners
Blade length: 101mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 222mm.
Thickness when closed: 21mm.
Weight: 225g.
Closure: Liner Lock
Clip: Removable, reversible and multi-position, in stainless steel
Packaging: -
Notes: Design by Ken Onion - Opening system through Carson Flipper system - Knife out of production, withdrawn from private collection, like new, without box

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: full tang in D2 steel
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 203mm.
Weight: 210g.
Sheath: made of Kydex, with Tek-Lok type attachment
Packaging: cardboard box with Viper logos
Notes: design by Tommaso Rumici

Intended use: Light Utility/Hunting

Type of production: Industrial
Blade Production: Italy
Blade: Full Tang in N690Co stainless steel
Blade Treatment: Stonewash
Handle: Brown Micarta
Blade Length: 115mm.
Blade Thickness: 5mm.
Closed Length: -
Total Length: 250mm.
Thickness when closed: -
Balance: set back by 3cm
Weight: 245g.
Closure: -
Clip: -
Sheath: brown leather
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

Precious Mother-of-Pearl Collection consisting of 3 knives: TWIN, KEY, HUG with titanium handle and mother-of-pearl insert. Rounded spring with handmade file work. Accompanied by individual leather liners.

Limited and numbered series of 200 sets with cylindrical wooden and plexiglass display stand.

HUG DATA SHEET
Type of production: Industrial, with handmade lima spring
Country of production: Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium GR5 and Mother of Pearl
Blade length: 71mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 184mm.
Thickness when closed: 14mm.
Weight: 75g.
Closure: Slipjoint
Clip: titanium
Notes: Design by Sacha Thiel

KEY DATA SHEET
Type of production: Industrial, with handcrafted file spring
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium GR5 and Mother of Pearl
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 185mm.
Thickness when closed:10.5mm.
Weight: 75g.
Closure: SlipJoint
Clip: -
Notes: Design by Jesper Voxnaes

TWIN DATA SHEET
Type of production: Industrial, with handmade file spring
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium GR5 and Mother of Pearl
Blade length: 77mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 176mm.
Thickness when closed: 10mm.
Weight: 77g.
Closure: Slipjoint
Clip: -
Notes: Design by Fabrizio Silvestrelli

Intended use: Gentleman/EDC

Type of production: Industrial
Blade production: Italy
Blade: CPM MagnaCut steel
Blade Treatment: Stonewashed
Handle: Purple Dark Carbon Fiber
Blade length: 68mm.
Blade thickness: 4mm.
Closed length: 111mm.
Total length: 184mm.
Closed thickness: 15mm.
Balancing: -
Weight: 105g.
Closure: Liner Lock
Clip: in anodized titanium
Scabbard: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight: a few small scratches and abrasions on corners and clip; small oxidation marks on hardware
* Box: Present and original (full set).
* Scabbard: -
* Manuals, Certificates and Warranties: Present (full set)
* Checked and Certified by our in-house laboratory



Tactical knife/EDC produced in the late 1990s and designed by martial arts expert James Keating,

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.

Intended Use: Tactical/Collection
Production Type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM 
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 75mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 13mm
Weight: 90g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Master of Defense logos

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On order
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Packaging: Zip pouch, original
* Scabbard: Leather, pocket size, original
* Manuals, Certificates and Warranties: Certificate of guarantee and authenticity present.
* Checked and Certified by our in-house laboratory

Intended use: sports/collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel M390 60/61HRC
Blade finish: satin finish
Handle: titanium
Blade length: 176mm.
Blade thickness: 2.5mm.
Length closed: 99mm.
Total length: 175mm.
Weight: 64g.
Closure: Frame Lock
Clip: removable, titanium
Scabbard: Leather pouch
Packaging: Zip pouch and certificate of authenticity and warranty 
Notes: Designed and made entirely by hand in Italy by Franco "Frank" Bonassi, Decemnre 2019 example with serial number T27 - Previously purchased, from private collection

Intended use: Sporting/EDC

Production type: Industrial
Country of Production: Maniago - Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium insignia, Micarta Natural grips
Blade length: 77mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 176mm.
Thickness when closed: 10mm.
Weight: 77g.
Closure: Slipjoint
Sheath: Leather
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio Silvestrelli

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Stonewashed
Handle: G10 Two-tone
Blade length: 70mm.
Blade thickness: 3.5mm.
Total length: 170mm.
Weight: 105g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended Use: Sporting / Hunting

Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Carbon Fiber
Blade length: 67mm.
Blade thickness: 3.5mm.
Total length: 167mm.
Weight: 100g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Italy
Blade: Sintered stainless steel Lohmann LO-QPM20-4
Blade finish: Dark Stonewashed
Handle: GR5 Dark Stonewashed Titanium with anodized titanium spacer
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 208mm.
Thickness when closed: 12mm.
Weight: 137g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jens Anso

Intended Use: Sporting/EDC

Type of production: Industrial
Country of Production: Maniago - Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: bronze, dark stonewashed, CNC machined, with Stars design
Blade length: 71mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 184mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Slipjoint
Sheath: leather
Packaging: cardboard box with Viper Knives logos
Notes: Design by Sacha Thiel

Knife from private collection - Vintage model (presumably early 90's) from Maison Coutellerie Thiers - In very good condition, never used for cutting, still shows some small signs of wear due to past time - Supplied with original leather sheath, with some small signs of wear - Checked and certified by our in-house laboratory.

Intended Use: Collection/Sportsman

Type of manufacture: Industrial
Country of Production: France
Blade: Stainless steel Z70CD15 (440A)
Blade finish: satin-finished
Handle: stainless steel and dark green stamina wood
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 175mm.
Weight: 95g.
Closure: Back Lock
Clip: not present
Sheath: leather, with belt loop
Notes: knife from private collection in excellent condition

H.E.F.T. Hostile Environment Field Tool
Knife born from the collaboration between the American DPX Gear and the Italian company Lion Steel.

Knife withdrawn from a private collection - Globally in excellent condition, complete with original box and certificates - Checked, certified by our in-house Coltelleria Collini laboratory.

Intended use: Sports / Tactical

Type of production: Semi-Industrial
Production Lama: Italy
Blade: Sleipner Steel 60HRC
Blade treatment: black satin TiCN PVD coating
Handle: G10 Black
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: central
Weight: 200g.
Designed: by Tommaso Rumici & Robert Young Pelton
Sheath: cordura
Packaging: cardboard box with DPX GEAR logos

Intended Use: Tactical / Light Utility

Production type: Industrial
Country of Production: Italy
Blade: Full tang, Sleipner steel 59/61HRC
Blade Finish: Black DLC
Handle: Micarta
Blade length: 152mm.
Blade thickness: 6mm.
Total length: 296mm.
Balance: backward
Weight: 260g.
Scabbard: Kydex with Tek-Lok multi-position locking system.
Package: Cardboard box with Viper Knives logos
Notes: Design by Tommaso Rumici - 2021 version of the Fearless model, originally produced in 2006 with N690Co stainless steel.

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: M390 60 / 61HRC stainless steel
Blade treatment: Satin finish
Handle: titanium with micarta grips
Blade length: 80mm.
Blade thickness: 4mm.
Closed length: 107mm.
Total length: 190mm.
Thick when closed: 14mm.
Weight: 123g.
Closure: Back Lock
Clip: titanium
Sheath: -
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio Silvestrelli

Intended use: Sports / EDC

Type of production: Industrial
Production Lama: Italy
Blade: In stainless steel N690Co 57 / 59HRC
Blade treatment: Satin
Handle: Bocote wood with internal 420C liners and anodized GR2 titanium spacer
Blade length: 73mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 182mm.
Weight: 90g.
Closure: patented Action Stopper system
Clip: Satin stainless steel
Packaging: cardboard box with Viper logos
Notes: Design by Tommaso Rumici

Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Stonewashed
Handle: Satinized titanium 3D processing
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 137g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearing

Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Satin
Handle: Carbon fiber with 3D processing
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearing

Intended use: sportsman / gentleman

Type of production: industrial
Lama production: Italy
Blade: Sandvik 12C27 stainless steel
Blade treatment: -
Handle: ram horn, with liners embedded in stainless steel
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 75mm.
Thick when closed: 12mm.
Total length: 125mm.
Balancing: -
Weight: 60g.
Closure: Liner Lock
Clip: -
Sheath: black leather case
Notes: design by Fabrizio Silvestrelli

Intended use: Sports

Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel M390 59 / 60HRC
Blade treatment: Stonewashed
Handle: Micarta canvas
Blade length: 62mm.
Blade thickness: 4mm.
Total length: 154mm.
Weight: 95g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Tommaso Rumici

Intended use: Sports

Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel M390 59 / 60HRC
Blade treatment: Stonewashed
Handle: Micarta canvas
Blade length: 67mm.
Blade thickness: 4mm.
Total length: 154mm.
Weight: 95g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Tommaso Rumici

Intended use: Sports

Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Marbled carbon fiber
Blade length: 67mm.
Blade thickness: 4mm.
Total length: 154mm.
Weight: 95g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Tommaso Rumici

Intended use: Sports

Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Marbled carbon fiber
Blade length: 67mm.
Blade thickness: 4mm.
Total length: 154mm.
Weight: 95g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Tommaso Rumici

In designing the Belone, the Danish Jesper Voxnaes started from typical lines of the Italian regional tradition, perfectly reworked according to his modern and minimalist style that made him famous all over the world. The result is a light and tapered folding knife, embellished with refined details, such as the holes in the back of the handle.
The Böhler M390 Microclean steel gives the Belone excellent cutting properties, and the ball bearings make it the opening with the very fast pinball machine, perfectly integrated into the overall design. The handle, with its well-kept ergonomics, has an anodized titanium structure, enclosed in thin carbon fiber folders.
The Belone clip is attached to the spacer so that the knife disappears completely into the pocket, maintaining maximum discretion.

Intended use: Gentleman / EDC

Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60-61 hrc
Lama treatment: Stonewashed
Handle: Titanium and carbon fiber
Blade length: 85mm.
Blade thickness: 3.4mm.
Length closed: 114mm.
Total length: 200mm.
Thick when closed: 11.3mm.
Balancing: -
Weight: 78g.
Closure: Frame Lock
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

In designing the Belone, the Danish Jesper Voxnaes started from typical lines of the Italian regional tradition, perfectly reworked according to his modern and minimalist style that made him famous all over the world. The result is a light and tapered folding knife, embellished with refined details, such as the holes in the back of the handle.
The Böhler M390 Microclean steel gives the Belone excellent cutting properties, and the ball bearings make it the opening with the very fast pinball machine, perfectly integrated into the overall design. The handle, with well-kept ergonomics, has an anodized titanium structure, enclosed in thin titanium folders.
The Belone clip is attached to the spacer so that the knife disappears completely into the pocket, maintaining maximum discretion.
Intended use: Gentleman / EDC

Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60-61 hrc
Lama treatment: Stonewashed
Handle: Titanium
Blade length: 85mm.
Blade thickness: 3.4mm.
Length closed: 114mm.
Total length: 200mm.
Thick when closed: 11.3mm.
Balancing: -
Weight: 87g.
Closure: Frame Lock
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended use: Light Utility / Hunting

Type of production: Industrial
Lama production: Italy
Blade: Full Tang in N690Co stainless steel
Blade treatment: -
Handle: Green Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Length closed: -
Total length: 250mm.
Thickness when closed: -
Balancing: 3cm back
Weight: 245g.
Closure: -
Clip: -
Sheath: brown leather
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin
Handle: ziricote wood with heads and spacer in GR2 Titanium
Blade length: 76mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thick when closed: 16mm.
Weight: 135g.
Washers: in steel and bronze, with ball bearings
Closing: Liner Lock in stainless steel 1.4116
Clip: -
Sheath: -
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio Silvestrelli

Intended use: hunting / sporting

Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel N690Co 58 / 60HRC
Blade treatment: Stonewashed
Handle: G10
Blade length: 88mm.
Blade thickness: 3.8mm.
Total length: 200mm.
Balancing: -
Weight: 115g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Jesper Voxnaes

Intended use: hunting / sporting

Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel N690Co 58 / 60HRC
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 88mm.
Blade thickness: 3.8mm.
Total length: 200mm.
Balancing: -
Weight: 110g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Jesper Voxnaes

Intended use: Light Utility / Hunting

Type of production: Industrial
Lama production: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Blade treatment: -
Handle: Olive Wood
Blade length: 105mm.
Blade thickness: 3.8mm.
Length closed: -
Total length: 227mm.
Thickness when closed: -
Balancing: 1.5cm back
Weight: 156g.
Closure: -
Clip: -
Sheath: brown leather
Packaging: cardboard box with Viper logos
Notes: Design by Tommaso Rumici

Purpose: sport / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Stone Washed
Handle: G10 with anodized titanium spacer
Blade Length: 85mm.
Blade thickness: 4mm.
Closed length: 110mm.
Overall length: 192mm.
Closure thickness: 14mm.
Weight: 102g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Stainless Steel Liner Lock 1.4116
Clip: Anodized titanium, made from full, removable
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio Silvestrelli

Purpose: Sports / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Stone Washed
Handle: G10 and Titanium
Blade Length: 78mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 195mm.
Thickness: 15mm.
Weight: 122g.
Opening: Carson Flipper system or ambidextrous pin on the blade
Washers: steel and bronze, with ball bearings
Closure: FrameLock
Clip: Titanium, removable and reversible
Sheath: -
Packing: Cardboard box with Viper Knives logos
Remarks: Design by Rick Hinderer

Purpose: Sports / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Satin
Handle: Carbon Fiber and Titanium
Blade Length: 78mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 195mm.
Closed thickness: 15mm.
Weight: 118g.
Opening: Carson Flipper system or ambidextrous pin on the blade
Washers: steel and bronze, with ball bearings
Closure: FrameLock
Clip: Titanium, removable and reversible
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Rick Hinderer

er Knives logos
Notes: Design by Rick Hinderer

Purpose: Sports / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Satin
Handle: G10 and Titanium
Blade Length: 78mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 195mm.
Thickness: 15mm.
Weight: 122g.
Opening: Carson Flipper system or ambidextrous pin on the blade
Washers: steel and bronze, with ball bearings
Closure: FrameLock
Clip: Titanium, removable and reversible
Sheath: -
Packing: Cardboard box with Viper Knives logos
Remarks: Design by Rick Hinderer

Use: Light Utility

Type of production: Industrial
Production Country: Italy
Blade: Carbon steel D2 59 / 60HRC
Blade Treatment: Blackwash
Handle: Canvas Micarta
Blade length: 105mm.
Blade thickness: 5.8mm.
Overall length: 227mm.
Balancing: backward 2cm
Weight: 260g.
Sheath: Nylon, compatible M.O.L.L.E. by Vega
Packaging: cardboard box with Viper and logos Tecnocut
Notes: Design by Tommaso Rumici

Use: Light Utility

Type of production: Industrial
Production Country: Italy
Blade: Carbon steel D2 59 / 60HRC
Blade Treatment: Blackwash
Handle: Canvas Micarta
Blade length: 105mm.
Blade thickness: 5.8mm.
Overall length: 227mm.
Balancing: backward 2cm
Weight: 260g.
Sheath: Nylon, compatible M.O.L.L.E. by Vega
Packaging: cardboard box with Viper and logos Tecnocut
Notes: Design by Tommaso Rumici

Use: Light Utility

Type of production: Industrial
Production Country: Italy
Blade: Carbon steel D2 59 / 60HRC
Blade Treatment: Blackwash
Handle: Canvas Micarta
Blade length: 125mm.
Blade thickness: 5.8mm.
Overall length: 252mm.
Balancing: back 1cm
Weight: 280g.
Sheath: Nylon, compatible M.O.L.L.E. by Vega
Packaging: cardboard box with Viper and logos Tecnocut
Notes: Design by Tommaso Rumici

Intended use: Sports / EDC

Type of production: Industrial
Production Country: Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Stonewashed
Handle: Titanium and G10
Blade length: 86mm.
Blade thickness: 4mm.
Closed Length: 124mm.
Overall length: 210mm.
Thick when closed: 18mm.
Weight: 110g.
Lock: Frame Lock with steel casement
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended Use: Sport / EDC

Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 57 / 59HRC
Blade Treatment : Satin
Handle: G10 with 420C inner liners and anodized GR2 titanium spacer
Blade length: 73mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 182mm.
Thick when closed: -
Balancing: -
Weight: 90g.
Closing: Action Stopper patented system
Clip: Stainless steel satin
Packaging: cardboard box with Viper logos
Notes: Design by T. Rumici

Intended Use: Sport / EDC

Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 57 / 59HRC
Blade Treatment: Satin
Handle: Carbon Fiber with 420C inner liners and anodized GR2 titanium spacer
Blade length: 73mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 182mm.
Thick when closed: -
Balancing: -
Weight: 90g.
Closing: Action Stopper patented system
Clip: Stainless steel satin
Packaging: cardboard box with Viper logos
Notes: Design by T. Rumici

Intended use: Allround Utility

Type of production: Industrial
Production Blade: Italy
Blade: Carbon steel D2 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Canvas Micarta
Blade length: 125mm.
Blade thickness: 4.8mm.
Length closed: -
Overall length: 260mm.
Thickness when folded: -
Balancing: back 1cm
Weight: 260g.
Closed: -
Clip: -
Sheath: Nylon and ABS compatible M.O.L.L.E
Packaging: cardboard box neutral
Notes: Design by Jesper Voxnaes

Intended Use: Heavy Utility / Machete

Production type: Industrial
Country of Production: Italy
Blade: D2 steel at 58/59HRC
Blade Finish: Stone Washed
Handle: Pao Santo wood
Blade length: 230mm.
Blade thickness: 4.8mm.
Total length: 390mm.
Balance: Advanced
Weight: 498g.
Sheath: Black leather
Packaging: Cardboard box
Notes: Design by Tommaso Rumici

Intended Use: Heavy Utility / Machete

Production type: Industrial
Country of Production: Italy
Blade: D2 steel at 58/59HRC
Blade Finish: Black PVD
Handle: Canvas Micarta
Blade length: 230mm.
Blade thickness: 4.8mm.
Total length: 390mm.
Balance: Advanced
Weight: 498g.
Sheath: Cordura with M.O.L.L.E. system.
Packaging: Cardboard box
Notes: Design by Tommaso Rumici

Intended Use: Heavy Utility / Machete

Production type: Industrial
Country of Production: Italy
Blade: D2 steel at 58/59HRC
Blade Finish: Stone Washed
Handle: Canvas Micarta
Blade Length: 230mm.
Blade thickness: 4.8mm.
Total Length: 390mm.
Balance: Advanced
Weight: 498g.
Sheath: Cordura with M.O.L.L.E. system.
Packaging: Cardboard box
Notes: Design by Tommaso Rumici

Knife withdrawn from a private collection - Knife no longer in production since 2014 - in excellent condition, without box - Never resharpened - Checked and certified by our internal Coltelleria Collini laboratory.

Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim Vagner