Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Giant Mouse - ACE Sonoma V2 - Elmax & Green Canvas Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Very good condition, with a few small marks on blade and handle.
* Commercially available: Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small, unnoticeable scratches on the tip of the blade.
* Marks on handle: A small mark near the clip housing.
* Packaging: Yes
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory
Production Type: Industrial
Country of Production: China (by Reate Knives)
Blade: Elmax stainless steel
Blade finish: satin finish
Handle: green cavnas micarta with brass spacer
Blade length: 87mm.
Blade thickness: 3.5mm.
Length closed: 114mm
Total length: 203mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: cardboard box with Giant Mouse logos
Notes: discontinued knife, winner of the "2023 BEST EDC CHAMPION" award by CarryologyGM-ACESO-CP -
Deroma - Pattada Resolza knife handcrafted ram's horn knife - PRIVATE COLLECTION
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratoryIntended use: Regional
Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -AP-DR-RES-12 -
BlackJack - Wasp Vintage Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife from the 1990s, previously purchased.
* Condition: In very good condition
* Commercially available: discontinued
* Sharpening: Factory sharpened
* Marks on blade: Small marks given by time.
* Marks on handle: None
* Box: -
* Scabbard: Present, but presumably not original although fully compatible.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / SportingProduction Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8A
Blade Finish: Satin finish
Handle: Kraton
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 263mm.
Balance: advanced
Weight: 225g.
Scabbard: brown leather, belt-mounted, presumably not original but fully compatible
Packaging: -
Notes: previously purchased knife, from private collectionBJ-WA-CP -
William Henry - Signature Collection B12-FTD - Damascus ZDP-189 and Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: some minor scuffs and hairlines on the right side
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Collection
Production type: MidTech
Country of manufacture: USA
Blade: stainless rolled damascus with wave design, 45-ply and ZDP-189 cutting edge
Blade finish: -
Handle: titanium with blue anodized and topaz set
Blade length: 79mm.
Blade thickness: 2.3mm.
Length closed: 100mm.
Total length: 180mm.
Weight: 57g.
Closure: Button Lock with embedded topaz
Sheath: leather, with stainless steel clip
Packaging: cardboard box with William Henry logos and warranty certificate
Notes: previously purchased knife, from a private collectionWH-BF12-CP -
Randall Knives - Astro Model 17 - PRIVATE COLLECTION - custom knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in excellent condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.Designed specifically for the seven Mercury Program astronauts, the Model 17 accompanied these pioneers on the United States' first manned space flights. Astronaut Gordon Cooper contributed to the final design of this knife, making it not only a survival tool, but also a piece of history. Two examples of this knife, rich in historical value, are currently on display at the Smithsonian Institution.
Intended use: utility/militaryType of production: handcrafted
Country of manufacture: USA
Blade: 440B stainless steel
Blade finish: satin-finished
Handle: micarta, brass and duralumin
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 256mm.
Balance: on the guard branch
Weight: 252g.
Sheath: Black Leather
Notes: previously purchased knife, withdrawn from private collectionAP-RK-17ASCP -
Livio Montagna - 2014 Hunting Knife - RWL34 & Sambar Amber - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratoryIntended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.AP-MONT-CPSA -
Livio Montagna - 2017 Fighter - N690Co & Snake Wood - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratoryIntended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel N690Co hardened to 59/60 HRC
Blade finish: satin finish
Handle: Snakewood - 416 stainless steel guard and pommel
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 240mm.
Weight: 185g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from a private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.AP-MONT-CPFD -
Tommy Lee - Clip Point - Damascus & Giraffe Bone - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1990 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade; artisan passed away in 2013
* Sharpening: Factory sharpening, can be improved.
* Marks on blade: A few small oxidation marks on handle.
* Marks on handle: A few small marks on steel bolsters due to time.
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks from time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Collection/GentlemanType of production: Handcrafted
Country of Production: USA
Blade: full tang, handcrafted carbon damascus steel
Handle: stainless steel heads and giraffe bone handles
Blade length: 104mm
Blade thickness: 3mm.
Total length: 196mm.
Weight: 94g.
Sheath: Leather, for belt or boot, with steel clip for attachment
Packaging: -
Notes: rare handcrafted knife made in 1990 by well-known American knife maker Tommy LeeFC-TLEE-DG-CP -
Peter Herbst - Engraved Integral - CPM-T440V & Fossil Ivory - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 03/1990 model, in like-new condition
* Commercially available: Unique knife, entirely custom made and hand-engraved
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house workshopIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: Germany
Blade: stainless steel CPM-T440V at 60HRC
Blade finish: mirror polish
Handle: integral from solid, fully hand-engraved, with fossil ivory grips and red micarta spacers
Blade length: 93mm
Blade thickness: 4mm.
Total length: 203mm.
Weight: 99g.
Sheath: Leather
Packaging: -
Notes: rare handcrafted knife made in March 1990 by well-known German knifemaker Peter Herbs, a member of the German Knifemakers' Guild and a member of the very prestigious American Knifemakers' Guild.FC-PHERBST-CP -
Frank Centofante - SL-10 - ATS34 & Micarta #049 - PRIVATE COLLECTION - handmade knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 12/1990 model, overall in good condition, with a few small marks from time
* Commercially available: Limited edition, numbered model, made entirely by hand; craftsman passed away in 2009
* Sharpening: Re-sharpened, a few small marks on blade due to sharpening
* Marks on blade: A few small marks
* Marks on handle: A few hairlines on the bolsters and a small dent on the left micarta handle.
* Box: -
* Scabbard: Suede leather case.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: USA
Blade: stainless steel ATS34
Blade finish: satin finish
Handle: Stainless steel and Micarta
Blade length: 83mm
Blade thickness: 2.5mm.
Length closed: 108mm.
Total length: 189mm.
Thickness when closed: 8mm.
Weight: 99g.
Closure: Back Lock
Clip: -
Sheath: Suede leather pouch
Packaging: -
Notes: rare handcrafted knife made in December 1990 by noted U.S. knife maker Frank Centofante who passed away in 2009, serial number #049FC-SL10-CP -
ExtremaRatio - MF1 BC knife - PRIVATE COLLECTION - tactical knife
Type: Previously Purchased
Condition: in excellent condition
Available in the market, currently in production
Sharpening: Factory standard
Blade marks: None
Handle marks: None
Box: Present
Sheath: Not applicable
Manuals, Certificates, and Warranties: ER
Checked and Certified by our internal laboratory
Intended use: Tactical/EmergencyType of production: Industrial
Blade Production: Italy
Blade: N690Co stainless steel, 58HRC
Blade Treatment: Testudo
Handle: Anticorodal
Blade length: 95mm
Blade thickness: 4mm
Closed length: 134mm
Total length: 225mm
Closed thickness: 24mm
Balance: Not applicable
Weight: 162g
Closure: Liner Lock
Clip: Stainless Steel
Sheath: Not applicable
Packaging: black cardboard box with Extrema Ratio logos
Notes: seat belt cutter, glass breaker, screwdriver for opticsAP-MF1-BC-CP -
Francesco Pachi - Custom Folder knife - BG42 & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Condition: in like new condition
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: lacking certificate and packaging.
* Checked and Certified by our in-house laboratoryIntended Use: Collection
Type of production: Handcrafted unique piece by Francesco Pachì made at the direct request of a customer
Country of production: Italy
Blade: stainless steel BG-42 with gold plated opening pin set with hard stone
Handle: gold-plated internal folders, satin-finished stainless steel heads, red micarta spacer, Loveless micarta handle and gold-plated hardware
Blade length: 57mm.
Blade thickness: 3mm.
Total length: 136mm.
Weight: 57g.
Sheath: lizard skin knife pouch
Locking system: Liner Lock
Notes: knife withdrawn from private collectionAP-LF-CP -
Lionsteel - T.R.E. Three Rapid Exchange - Carbon Fiber - PRIVATE COLLECTION - M390 - Knife
Type: Previously purchased and used
Condition: In excellent condition
Availability: Available for purchase
Sharpening: Resharpened
Blade marks: NO
Handle marks: small marks on the clip
Box: Original and present, made of cardboard
Sheath: Not included
Manuals, Certificates, and Warranties: Included
Inspected and Certified by our internal laboratory
Usage: Sports/CollectionType of production: Industrial
Country of production: Italy
Blade: Bohler M390 steel 60/61HRC
Blade finish: Bead blasted and matt
Handle: Carbon Fiber and Titanium
Blade length: 74mm
Blade thickness: 3.5mm
Total length: 175mm
Weight: 62g
Lock: Titanium Frame Lock with steel stopper
Clip: 6Al4V Titanium
Packaging: Cardboard box with LionSteel logos
Notes: IKBS ball-bearing opening with Carson flipper systemAP-TRE-FC -
Spyderco - Paramilitary Knife - G10 Black - Serrated - C81GS - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased and Used
Conditions: In excellent conditions
Available in the market: Out of production since 2010
Sharpening: Factory
Marks on blade: NO
Marks on handle: NO
Box: Present
Sheath: -
Manuals, Certificates, and Warranties: No
Checked and Certified by our internal laboratory
Intended use: Sport / CollectionType of production: Industrial
Blade Production: USA
Blade: In CPM-S30V stainless steel
Blade finish: Satin
Handle: G10
Blade Length: 87mm.
Blade Thickness: 3.5mm.
Closed Length: 122mm.
Total Length: 210mm.
Weight: 110g.
Closure: Compression Lock
Clip: Painted stainless steel
Packaging: Cardboard box with Spyderco logos
Notes:AP-C81GS -
Zero Tolerance - Ken Onion Flipper Knife - ZT0200ST - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Condition: in excellent condition
Available in commerce: NO
Sharpening: Original
Marks on blade: YES - small marks
Marks on handle: NO
Packaging: YES, original box
Checked and Certified by our internal laboratory
Intended use: Tactical/MilitaryType of production: Industrial
Country of production: USA
Blade: In stainless steel 154CM
Blade finish: Tungsten DLC Coating
Handle: G10 with stainless steel liners
Blade length: 101mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 222mm.
Thickness when closed: 21mm.
Weight: 225g.
Closure: Liner Lock
Clip: Removable, reversible and multi-position, in stainless steel
Packaging: -
Notes: Design by Ken Onion - Opening system through Carson Flipper system - Knife out of production, withdrawn from private collection, like new, without boxAP-ZT0200ST -
Cold Steel - AD-10 Lite - Tanto Point Knife by Andrew Demko - FL-AD10T - folding knife
The AD-10 Lite is the cheaper version of the AD-10 folder with which it shares most of the features, style and high-performance potential such as our unique Tri-Ad Lock, blade configurations and steel thickness. However, we chose to use less expensive materials in manufacturing: for example, instead of G-10 handles we used GFN and for the blade steel we chose to use an AUS 10A instead of CPM-S35VN while still remaining razor sharp and ready for action!
Intended Use: Sport/Utility
Production Type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel AUS-10A
Blade finish: Satin finish
Handle: GFN
Blade length: 89mm.
Blade thickness: 3.8mm.
Total length: 222mm.
Weight: 186g.
Locking system: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew DemkoCSFL-AD10T -
Cold Steel - AD-10 Lite - Drop Point Knife by Andrew Demko - FL-AD10 - folding knife
The AD-10 Lite is the cheaper version of the AD-10 folder with which it shares most of the features, style and high-performance potential such as our unique Tri-Ad Lock, blade configurations and steel thickness. However, we chose to use less expensive materials in manufacturing: for example, instead of G-10 handles we used GFN and for the blade steel we chose to use an AUS 10A instead of CPM-S35VN while still remaining razor sharp and ready for action!
Intended Use: Sport/Utility
Production Type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel AUS-10A
Blade finish: Satin finish
Handle: GFN
Blade length: 89mm.
Blade thickness: 3.8mm.
Total length: 222mm.
Weight: 186g.
Locking system: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew DemkoCSFL-AD10 -
Master of Defense - Hornet Black Serrated - James Keating Design - PRIVATE COLLECTION - folding knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight: a few small scratches and abrasions on corners and clip; small oxidation marks on hardware
* Box: Present and original (full set).
* Scabbard: -
* Manuals, Certificates and Warranties: Present (full set)
* Checked and Certified by our in-house laboratory
Tactical knife/EDC produced in the late 1990s and designed by martial arts expert James Keating,
Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.
Intended Use: Tactical/Collection
Production Type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 75mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 13mm
Weight: 90g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Master of Defense logosMOD-HORNET-CP -
Franco Bonassi - Titanium Front Flipper Custom M390 - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On order
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Packaging: Zip pouch, original
* Scabbard: Leather, pocket size, original
* Manuals, Certificates and Warranties: Certificate of guarantee and authenticity present.
* Checked and Certified by our in-house laboratory
Intended use: sports/collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel M390 60/61HRC
Blade finish: satin finish
Handle: titanium
Blade length: 176mm.
Blade thickness: 2.5mm.
Length closed: 99mm.
Total length: 175mm.
Weight: 64g.
Closure: Frame Lock
Clip: removable, titanium
Scabbard: Leather pouch
Packaging: Zip pouch and certificate of authenticity and warranty
Notes: Designed and made entirely by hand in Italy by Franco "Frank" Bonassi, Decemnre 2019 example with serial number T27 - Previously purchased, from private collectionAP-FRANK-TI -
Cold Steel - Leatherneck Bowie - D2 Black - FX-LTHRNK - knife
Intended Use: Tactical / Heavy Duty
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Black Powder Coating
Handle: made of Griv-Ex polymer, with steel pommel
Blade length: 267mm.
Blade thickness: 5mm.
Total length: 387mm.
Balance: Advanced
Weight: 474g.
Sheath: Secure-Ex ABS
Packaging: Cardboard box with Cold Steel logos
Notes: -CSFX-LTHRNK -
Cold Steel - 4 Max Scout - Flat Dark Earth and Black Blade - 62RQ-DEBK - folding knife
Intended Use: Sport/Utility
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS 10A
Blade treatment: Black Coating
Handle: Griv-Ex™
Blade Length: 100mm.
Blade thickness: 3.8mm.
Total length: 250mm.
Weight: 288g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew DemkoCS62RQ-DEBK -
Cold Steel - Leatherneck Bowie - Lynn Thompson Limited Edition - 39LSFCAA - knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Stonewashed
Handle: made of Griv-Ex polymer, with steel pommel
Blade length: 267mm.
Blade thickness: 5mm.
Total length: 387mm.
Balance: Advanced
Weight: 474g.
Sheath: Secure-Ex ABS
Packaging: Cardboard box with Cold Steel logos
Notes: Limited and numbered edition with serial number engraved on blade and with Lynn Thompson's autograph on boxCS39LSFCAA -
Cold Steel - Engage Knife - 2.5" Clip Point Atlas Lock - FL-25DPLC - knife
Intended Use: Sporting / Utility
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade finish: Stonewashed
Handle: GFN (nylon and fiberglass)
Blade length: 63mm.
Blade thickness: 2.5mm.
Total length: 152mm.
Weight: 62g.
Closure: Atlas Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -CS-FL-25DPLC -
Cold Steel - 4 Max Scout knife - OD Green Stone Washed - 62RQ-ODSW - folding knife
Intended Use: Sport/Utility
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS 10A
Blade treatment: Stone Wash
Handle: Griv-Ex™
Blade length: 100mm.
Blade thickness: 3.8mm.
Total length: 250mm.
Weight: 288g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew DemkoCS62RQ-ODSW -
Cold Steel - Luzon Black & OD Green - Medium Flipper - 20NQL-ODBK - knife
Intended Use: Sporting/Tactical
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: Black Tuff-Ex coating
Handle: GFN (Glass Filled Nylon)
Blade length: 102mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 229mm.
Weight: 101g.
Closure: Liner Lock with additional safety catch on the right handle
Clip: removable, made of GFN (Glass Filled Nylon)
Packaging: cardboard box with Cold Steel logos
Notes: Carson Flipper opening systemCS20NQL-ODBK -
Cold Steel - SRK Compact OD Green - Survival Rescue Knife - 49LCKD-ODBK - knife
Intended Use: Tactical / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: SK-5 carbon steel
Blade finish: Black Tuff-Ex coating
Handle: Kray-Ex (Kraton)
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 241mm.
Balance: backward
Weight: 142g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logosCS49LCKD-ODBK -
Cold Steel - SRK Compact Tan - Survival Rescue Knife - 49LCKD-DTBK - knife
Intended Use: Tactical / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: SK-5 carbon steel
Blade finish: Black Tuff-Ex coating
Handle: Kray-Ex (Kraton)
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 241mm.
Balance: backward
Weight: 142g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logosCS49LCKD-DTBK -
Cold Steel - Engage 3.5" Clip Point - S35VN Atlas Lock - FL-35DPLC - knife
Designed as an everyday companion for heavy-duty use, Engage is an easy-to-carry knife with a wide 3.5-inch S35VN stainless steel blade for superior strength and edge retention. Featuring Cold Steel's Atlas™ lock that provides a consistent, durable and reliable lock; fully ambidextrous and able to handle any task. The easy-to-grip G-10 handle is built to be durable, and the satin-finished clip blade allows for precise and effective cutting.
Intended Use: Sporting/Utility
Production type: Industrial
Country of manufacture: Taiwan
Blade: stainless steel CPM-S35VN
Blade Finish: Satin finish
Handle: G-10
Blade length: 89mm.
Blade thickness: 3.8mm.
Total length: 221mm.
Weight: 187g.
Closure: Atlas Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -CSFL35DPLC -
Cold Steel - Razor Tek 6.5" - Black GFN - FX-65RZR - Knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: full tang, stainless steel 1.4116
Blade finish: satin finish
Handle: GFN
Blade length: 165mm.
Blade thickness: 5mm.
Total length: 298mm.
Weight: 330g.
Sheath: Secure-Ex® thermoplastic material
Packaging: cardboard box with Cold Steel logos
Notes: -CSFX-65RZR -
Extremaratio - Fulcrum II T knife Folder Tanto - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: In like new condition
* Commercially available: No
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: present
* Manuals, Certificates and Guarantees: yes
* Checked and Certified by our internal laboratory
Intended use: tactical/military/backupBlade: N690Co 58HRC stainless steel
Handle: Anticorodal thickness 4.5mm
Blade length: 95mm.
Blade thickness: 6mm.
Closed length: 127
Total length: 220mm.
Balancing: -
Weight: 200g.
Closure: Back Lock
Clip: removable and reversible in stainless steel
Sheath: in cordura
Notes: safety mechanism both on opening and closingExtrema Ratio foldables:
Directly derived from military specifications, this openable was developed to replace a fixed blade in use.
To achieve this result, very robust materials, high thicknesses and a solid and safe opening/closing system were used: the back lock.
The knife is equipped with a manual safety which provides maximum safety in use and drastically reduces the risk of accidental closures.
The safety, if inserted in the lock, prevents military or police operators from having the knife turned against them in the event of theft.
Materials and processes:
All the parts of the knife are machined from solid by high-precision numerical control machines while the assembly, adjustment and sharpening are carried out by hand.
The blade is made of N690 cobalt stainless steel, a steel with very high characteristics of resistance to mechanical stress, cutting capacity, edge retention and corrosion resistance. The grinding is flat and the hardness is 58HRC.
The grip scales are in Anticorodal, an aluminum alloy with high resistance to mechanical stress and oxidation.
The tang, in hardened N690, is an effective emergency glass breaker. All screws, pins and clips are in burnished stainless steel. The blade, the lever and the tang are covered with Testudo treatment, very resistant to abrasion and oxidation. The grips are black anodized.AP-ER-F-2 -
MC Thiers - AX1 Vintage Knife - Green Stamina Wood - PRIVATE COLLECTION - knife
Knife from private collection - Vintage model (presumably early 90's) from Maison Coutellerie Thiers - In very good condition, never used for cutting, still shows some small signs of wear due to past time - Supplied with original leather sheath, with some small signs of wear - Checked and certified by our in-house laboratory.
Intended Use: Collection/SportsmanType of manufacture: Industrial
Country of Production: France
Blade: Stainless steel Z70CD15 (440A)
Blade finish: satin-finished
Handle: stainless steel and dark green stamina wood
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 175mm.
Weight: 95g.
Closure: Back Lock
Clip: not present
Sheath: leather, with belt loop
Notes: knife from private collection in excellent conditionMCT-AX1-GSW -
Cold Steel - Air Lite Tanto - CS26WT - Black G10 - folding knife
We know that many of our customers are increasingly concerned about the weight and bulk of their EDC (every day carry) knife as space in their pockets is always very limited. That's why we focused on making a feather-light (90g.) and ultra-thin (8.8 mm thick) knife that can be carried 24/7 while still leaving pocket space for other essential accessories.
What we did not do, however, in our attempt to create a super EDC knife was to skimp on workmanship and materials. That's why all the blades in the Air Lite series feature impeccable workmanship and Japanese AUS-10A stainless steel, famous for its ability to hold an edge; the handles, on the other hand, are laser-cut from genuine G-10.
Even the locking mechanism is unbeatable-there's nothing better than our celebrated Tri-Ad Lock when it comes to finger protection. With an affordable price, amazing sharpness, and tremendous comfort and convenience in use, the Air Lite is truly unbeatable!
Intended Use: Sporty / EDCProduction type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade treatment: Satin finish
Handle: G10
Blade length: 89mm.
Blade thickness: 3mm.
Total length: 203mm.
Weight: 90g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -CS26WT -
Cold Steel - SR1 Clip Point knife - S35VN - 62L OD Green G10 - folding knife
The Cold Steel SRK (Survival Rescue Knife) has been a Cold Steel pride for over 25 years. Favorite knife for many military operators, still supplied to Navy SEALs today during BUDS training.
It is therefore not surprising that Cold Steel, when commissioned in-house designer Andrew Demko to develop a high-end tactical folding knife for military applications, was inspired by the legendary SRK!
The SR1's sturdy heavy-duty blade is made from US 5mm premium CPM-S35VN sintered steel
A good blade needs a good grip, so this model of the SR1 is made from G10.
For added reliability and safety, Cold Steel has equipped the SR1 with the famous Tri-Ad locking mechanism - proven time and again to be perfect for heavy-duty use.
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Satin
Handle: OD Green G10
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62L -
Cold Steel - SR1 Tanto Point knife - S35VN - 62LA OD Green G10 - folding knife
The Cold Steel SRK (Survival Rescue Knife) has been a Cold Steel pride for over 25 years. Favorite knife for many military operators, still supplied to Navy SEALs today during BUDS training.
It is therefore not surprising that Cold Steel, when commissioned in-house designer Andrew Demko to develop a high-end tactical folding knife for military applications, was inspired by the legendary SRK!
The SR1's sturdy heavy-duty blade is made from US 5mm premium CPM-S35VN sintered steel
A good blade needs a good grip, so this model of the SR1 is made from G10.
For added reliability and safety, Cold Steel has equipped the SR1 with the famous Tri-Ad locking mechanism - proven time and again to be perfect for heavy-duty use.
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Stone Wash
Handle: OD Green G10
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62LA -
Cold Steel - SR1 Lite Tanto Point knife - 62K1A - folding knife
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: 8Cr13MoV stainless steel
Blade treatment: Stone Wash
Handle: Griv-Ex ™
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62K1A -
Cold Steel - SR1 Lite knife - 62K1 - folding knife
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: 8Cr13MoV stainless steel
Blade treatment: Stone Wash
Handle: Griv-Ex ™
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62K1 -
Cold Steel - Mini Tuff Lite knife - Green - 20MTGD - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Taiwan
Blade: AUS-8A stainless steel
Blade treatment: Satin finish
Handle: Grivory (Griv-Ex)
Blade length: 35mm.
Blade thickness: 3mm.
Closed length: 76mm.
Total length: 126mm.
Weight: 41g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Cold Steel logos
Note: -CS20MTGD -
DPX Gear - H.E.F.T. 4 "Assault Fixed Blade - PRIVATE COLLECTION - knife
H.E.F.T. Hostile Environment Field Tool
Knife born from the collaboration between the American DPX Gear and the Italian company Lion Steel.Knife withdrawn from a private collection - Globally in excellent condition, complete with original box and certificates - Checked, certified by our in-house Coltelleria Collini laboratory.
Intended use: Sports / Tactical
Type of production: Semi-Industrial
Production Lama: Italy
Blade: Sleipner Steel 60HRC
Blade treatment: black satin TiCN PVD coating
Handle: G10 Black
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: central
Weight: 200g.
Designed: by Tommaso Rumici & Robert Young Pelton
Sheath: cordura
Packaging: cardboard box with DPX GEAR logosAP-DPHFX002 -
Cold Steel - Mini Recon 1 Tanto Point - 27BAT - knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade treatment: Stonewashed
Handle: Zytel
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 178mm.
Weight: 99g.
Closure: Tri-Ad Lock
Clip: Stainless steel, removable and reversible
Package: Cardboard box with Cold Steel logos
Notes: -CS27BAT -
Cold Steel - Oyabun Tanto Flipper Folder Knife - Signature Limited Edition - 32AA - knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN 59/60HRC
Blade Treatment: Satin finish
Handle: Aluminum T6061 mirror polished with G10 inserts
Blade length: 89mm.
Blade thickness: 3.8mm.
Length closed: 120mm.
Total length: 209mm.
Weight: 125g.
Closure: Liner Lock with additional safety catch on the right handle
Clip: Stainless steel, removable
Package: Cardboard box with Cold Steel logos
Notes: Numbered and limited edition of only 3500 pieces with signature of "Lynn C. Thompson" laser engraved on the blade and pencilled on the product packaging.FROM COLD STEEL WEBSITE
The Oyabun Limited is a high-end collector's version of our Oyabun. It shares features in common with the standard model in terms of functionality and appearance, but differs greatly in the materials used in its construction. It also has the value of being a collectible keepsake as only 3500 were produced. Each one is serially numbered and each box will be personally signed by Lynn C. Thompson himself! The blade's fine S35VN steel is an expensive powder coated steel that is heat treated to Rc 59-60 and hardened to sub zero. It has been given an attractive two-tone finish on the blade planes and a high satin polish on the blade bevels. Notably, the handle frame is milled from two solid billets of 6061 aluminum to create the bolster and pommel, which has been given a beautiful mirror polished finish. The handle also features CNC-machined G-10 plates with a diamond checkerboard pattern for a good, secure grip.
"I like flashy knives and when they are limited collector's editions with serial numbers made from high quality materials, I like them even more. That's why I think you'll like our Oyabun Limited. Only 3500 pieces will be made. All individually serial numbered with 6061 aluminum frames, CNC machined handles that are completely checkered just like my much original and a two-tone polished S35VN blade! And best of all, all this splendor and high performance is backed by our state-of-the-art leaf spring lock and secondary safety, so you know it won't bend on your hand. Now you have a knife that is worth every penny asked (just compare) and has tremendous appeal/appreciation from collectors!!!" - Lynn Thompson
CS32AA -
Cold Steel - Mini Leatherneck - Tanto Point - 39LSAA - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade finish: Satin finish
Handle: Kray-Ex™ with stainless steel guard
Blade length: 89mm.
Blade thickness: 3mm.
Total length: 171mm.
Weight: 93.5g.
Scabbard: Secure-Ex® in thermoplastic material
Packaging: Cardboard box with Cold Steel logos
Note: the package does not include the sheath's docking system or attachment system.CS-39LSAA -
Cold Steel - Oyabun Tanto Flipper Folder - 26T - knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: China
Blade: Stainless steel 4034SS
Blade Treatment: Satin finish
Handle: Griv-Ex with non-slip Kray-Ex
Blade length: 89mm.
Blade thickness: 3.8mm.
Length closed: 120mm.
Total length: 209mm.
Weight: 116g.
Closure: Liner Lock with additional safety catch on right handle
Clip: Stainless steel, removable
Packaging: Cardboard box with Cold Steel logos
Notes: -CS26T -
Cold Steel - Mini Leatherneck - Clip Point - 39LSAB - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade finish: Satin finish
Handle: Kray-Ex™ with stainless steel guard
Blade length: 89mm.
Blade thickness: 3mm.
Total length: 171mm.
Weight: 93.5g.
Scabbard: Secure-Ex® in thermoplastic material
Packaging: Cardboard box with Cold Steel logos
Note: the package does not include the sheath's docking system or attachment system.CS39LSAB -
Cold Steel - Kyoto I Mini Japanese Tanto - 17DA - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade finish: Satin finish
Handle: Kray-Ex™
Blade length: 82mm.
Blade thickness: 3mm.
Total length: 168mm.
Weight: 93.5g.
Scabbard: Secure-Ex® thermoplastic material
Packaging: Cardboard box with Cold Steel logos
Note: the package does not include the sheath's docking system or attachment system.CS17DA -
Cold Steel - Micro Recon 1 Tanto Point - 27DT - Knife
Intended Use: Sporting / EDC
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 4034SS
Blade Treatment: Stonewashed
Handle: Griv-Ex
Blade length: 47mm.
Blade thickness: 2.4mm.
Length closed: 67mm.
Total length: 110mm.
Weight: 30g.
Closure: Tri-Ad Lock
Clip: -
Package: Cardboard box with Cold Steel logos
Notes: supplied with key ringCS27DT -
Cold Steel - Micro Recon 1 Spear Point - 27DS - Knife
Intended Use: Sporting / EDC
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 4034SS
Blade Treatment: Stonewashed
Handle: Griv-Ex
Blade length: 47mm.
Blade thickness: 2.4mm.
Length closed: 67mm.
Total length: 110mm.
Weight: 30g.
Closure: Tri-Ad Lock
Clip: -
Package: Cardboard box with Cold Steel logos
Notes: supplied with key ringCS27DS -
Cold Steel - Tim Wells Slock Master - 20VSTW - knife
Intended Use: Sporting / Hunting
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade Finish: Polished
Handle: Kray-Ex™
Blade length: 165mm.
Blade thickness: 3.5mm.
Total length: 298mm.
Weight: 159g.
Scabbard: Secure-Ex® in thermoplastic material
Packaging: Cardboard box with Cold Steel logos
Notes: Made in collaboration with Tim Wells, one of the most famous bow and skeet hunters in the world.CS20VSTW -
Cold Steel - Tanto Machete 32cm - 97BTMS - knife
Intended use: Machete
Type of production: industrial
Blade: carbon steel 1050
Country of Production: South Africa
Handle: PVC
Blade length: 320mm.
Blade thickness: 2mm.
Total length: 470mm.
Balance: advanced, 8cm. from the handle
Weight: 450g.
Sheath: Nylon and ABS
Notes: -CS97BTMS