Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Intended use: Hiking / Hunting

Type of production: Industrial
Country of production: USA
Blade: full tang in 420 stainless steel
Blade treatment: satin finish
Handle: walnut wood
Blade length: 240mm.
Blade thickness: 5.8mm.
Total length: 375mm.
Balancing: slightly advanced
Weight: 506g.
Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

Intended Use: Utility / Bushcrat / Hunting

Production type: Industrial
Country of Production: USA
Blade: 420HC stainless steel full tang
Blade treatment: Satin finish
Handle: Micarta Mossy Oak
Blade length: 86mm.
Blade thickness: 3.5mm.
Total length: 210mm. 
Balance: on the guard branch
Weight: 148g.
Scabbard: Belt, leather, for vertical carrying.
Packaging: Cardboard box with OKC logos
Notes: -

Intended use: Collection

Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018

Acknowledgments

Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:

in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"

always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"

I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade

then in 2007 at "Scarperia" I won the third prize for best folding

but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.

Presentation of the craftsman

Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.

The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!

I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.

Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.

What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".

They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .

The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.

Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.

With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.

I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".

Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.

For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.

Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...

Ontario Knife Company - Old Hickory Butcher Knife - 7113 - knife
Known for their robust longevity in countless practical applications, Ontario's famous Old Hickory knives have been a go-to for cooking and outdoor enthusiasts for over 95 years.

Intended use: Hiking / Camp / Meat / Barbecue

Type of production: Industrial
Country of production: USA
Blade: carbon steel 1095 57-59 HRC
Blade treatment: satin finish
Handle: wood
Blade length: 360mm.
Blade thickness: 2.5mm.
Total length: 500mm.
Weight: 412g.
Sheath: without sheath
Packaging: without packaging
Notes: To make the knife sharper, through our internal laboratory, we further sharpen each blade before shipping.

CARE AND MAINTENANCE: This product uses a NON stainless steel with a high carbon content - it is therefore recommended to wash it under running water and dry it immediately manually with a clean cotton cloth or absorbent paper. To avoid the formation of rust and oxidation it is also highly recommended, after having dried it well, to protect the blade with a lubricant (eg grease, paraffin, lanolin, vaseline) that creates a protective barrier between the steel and the atmosphere.

Known for their robust longevity in countless practical applications, Ontario's famous Old Hickory knives have been a go-to for cooking and outdoor enthusiasts for over 95 years. In line with the Old Hickory design, this hunting knife features a 1095 carbon steel blade and wooden handle, making it perfect for hunting and outdoor use. As with all Old Hickory models, this knife also features a wooden handle with brass rivets. Both the fillet knife and the leather sheath are made in the USA.

Intended use: Fishing / Hunting

Type of production: industrial
Country of production: USA
Blade: carbon steel 1095 57-59 HRC
Blade treatment: satin finish
Handle: wood
Blade length: 140mm.
Blade thickness: 2mm.
Total length: 260mm.
Sheath: in leather
Packaging: Ontario official box
Note: To make the knife sharper, through our in-house laboratory, we further sharpen each blade before shipping.

CARE AND MAINTENANCE: it is recommended to wash it under running water and dry it immediately manually with a clean cotton cloth or absorbent paper.

Known for their rugged longevity in countless practical applications, Ontario's famous Old Hickory knives have been a go-to for cooking and outdoor enthusiasts for over 95 years. This model, thanks to its small size and ease of use, is ideal for processing fish and small game animals. It features an 8.5cm stainless steel blade with a satin finish. As with all Old Hickory models, this knife also features a wooden handle with brass rivets. Both the fillet knife and the leather sheath are made in the USA.

Intended use: Fishing / Hunting
Type of production: Industrial
Country of production: USA
Blade: carbon steel 1095 57-59 HRC
Blade treatment: satin finish
Handle: wood
Blade length: 100mm.
Blade thickness: 2mm.
Total length: 220mm.
Sheath: in leather
Packaging: Ontario official box
Notes: To make the knife sharper, through our internal laboratory, we further sharpen each blade before shipping.

CARE AND MAINTENANCE: it is recommended to wash it under running water and immediately dry it manually with a clean cotton cloth or absorbent paper.

Intended use: Sportsman / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: in steel tool D2
Blade treatment: Satin
Handle: Titanium
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: 140mm.
Total length: 235mm.
Thick when closed: 13.8mm.
Weight: 172g.
Opening: through thumbstood, ambidextrous
Washers: in Teflon
Closure: Frame Lock with stainless steel leaf
Clip: stainless steel, deep pocket type, reversible and removable
Packaging: Cardboard box with Ontario Knife Company logos
Note: -

Intended use: Sportsman / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: in steel tool D2
Blade treatment: Blackwashed
Handle: Titanium
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 123mm.
Total length: 213mm.
Thick when closed: 14.5mm.
Weight: 176g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Frame Lock with stainless steel leaf
Clip: titanium, machined from solid, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Robert Carter

Intended use: Hiking / Hunting

Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 carbon steel
Blade treatment: satin finish
Handle: walnut wood
Blade length: 103mm.
Blade thickness: 3mm.
Total length: 235mm.
Balancing: set back
Weight: 176g.
Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: 420HC stainless steel
Blade treatment: Satind
Handle: 6061-T6 aluminum
Blade length: 66mm.
Blade thickness: 2.6mm.
Length closed: 87mm.
Overall length: 151mm.
Thick when closed: 11mm.
Balancing: -
Weight: 38g.
Opening: hole on the blade
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, removable, with the function of a bottle opener
Sheath: -
Packaging: Cardboard box with Leatherman logos
Note: -

Blade: 61HRC RWL34 Stainless Steel
Handle: Walnut, Damascus and Titanium
Blade Lenght: 75mm.
Blade Thickness: 4mm.
Overall Lenght: 180mm.
Weight: 110g.
Lock: Liner lock
Clip: -
Sheath: -
Notes: Handmade in Italy by CIC Master Sergio Consoli

Ontario - P4 USMC Combat knife -

Intended Use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: 440A stainless steel
Treatment Lama: -
Handle material: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 310mm.
Balance: -
Weight: 290g.
Sheath: Leather Brown
Packaging: cardboard box with logos Ontario
Notes: -

Originally produced as an accessory to the ASEK survival knife series, this ASEK belt cutter is constructed of anodized aluminum. The ASEK Strap Cutter can also be considered a multi-tool thanks to the ceramic sharpener, the lanyard and the presence of a screwdriver. Click here for replacement blades for the ASEK Belt Cutter. The ASEK cutter blades are made in the USA.

Total length: 16.8 cm
Hardness: 55 HRC
Handle color black
Black blade color
Blade thickness: 0.064 cm
Blade material: 440 stainless steel
Blade length: 2.5 cm