Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Intended Use: Sporting / Utility

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade finish: Stonewashed
Handle: GFN (nylon and fiberglass)
Blade length: 63mm.
Blade thickness: 2.5mm.
Total length: 152mm.
Weight: 62g.
Closure: Atlas Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -

Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.

The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.

To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade

Type of production: semi-artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: in plywood with satin brass ring with nickel plating
Blade length: 100mm.
Blade thickness: 2.5mm.
Closed length: 127mm.
Thick when closed: 22mm.
Total length: 225mm.
Weight: 68g.
Closure: viro block

The handles are made of Italian olive wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid safety ring in nickel plated brass equipped with a special locking device (covered by patent n. active partner of this project) which can be activated both in the open and in the closed position.

As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.

The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.

 

Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: Collini Steel

Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.

The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.

To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade

Type of production: semi artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: olive wood
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Thick when closed: 22mm.
Total length: 212mm.
Weight: 65g.
Closure: viro block

The handles are made of Italian olive wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n. of this project) which can be activated both in the open position and in the closed position.

As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.

The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.

 

Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: Collini Steel

Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.

The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.

To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade

Type of production: semi artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: in walnut wood
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 190mm.
Weight: 46g.
Closure: viro block

The handles are made of antique and oiled walnut wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.

As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.

The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.

Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: Collini Steel

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 4034SS
Blade Treatment: Stonewashed
Handle: Griv-Ex
Blade length: 47mm.
Blade thickness: 2.4mm.
Length closed: 67mm.
Total length: 110mm.
Weight: 30g.
Closure: Tri-Ad Lock
Clip: -
Package: Cardboard box with Cold Steel logos
Notes: supplied with key ring

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 4034SS
Blade Treatment: Stonewashed
Handle: Griv-Ex
Blade length: 47mm.
Blade thickness: 2.4mm.
Length closed: 67mm.
Total length: 110mm.
Weight: 30g.
Closure: Tri-Ad Lock
Clip: -
Package: Cardboard box with Cold Steel logos
Notes: supplied with key ring

Cold Steel - The Bushman - 95BBUS Bowie Blade - knife

Intended Use: hunting / sporting

Blade: SK-5 High Carbon Steel
Wire Type: floor
Production Lama China
Handle: -
Blade length: 170mm.
Blade Thickness: 2.5mm.
Length closed: -
Total length: 310mm.
Balance: -
Weight: 284g.
Closing: -
Clip: -
Sheath: Secure-Ex with flint magnesium included

Cold Steel - Finn Bear - 20PC - knife

Intended Use: Sport / Hunting

Type of production: industrial
Production Blade: Taiwan
Blade: stainless steel 1.4116 Krupp 56/57HRC
Treatment Blade: -
Handle: Zytel
Blade length: 105mm.
Blade Thickness: 2.5mm.
Length closed: -
Overall length: 220mm.
Balancing: -
Weight: 78g.
Closure: -
Clip: -
Sheath: Cordura
Notes: -

Fallkniven Tre Kronor TK3

La linea "Tre Kronor" fonde le più moderne tecnologie martensitiche con le antiche radici della famiglia reale svedese.
Questi coltelli, infatti, sono gli unici a potersi fregiare del simbolo reale delle tre corone poste sulla lama e sulla splendida confezione in legno che contiene il coltello ed il fodero.
L'acciaio laminato utilizzato è attualmente uno dei migliori acciai industriali in commercio ed è composto da una lamina interna in SGPS da polvere, acciaio già utilizzato per il modello U2, a 62HRC accopiato a due guancette esterne in VG2. I coltelli rivelano così eccezionali doti di taglio, penetrazione e tenuta del filo.

Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
Manicatura: Legno di Cocobolo
Lunghezza lama: 70 mm.
Spessore della lama: 2.5 mm.
Lunghezza totale: 165 mm.
Peso: 100 g.
Chiusura: Backlock
Fodero: Nero, in cordura