bing
News
Best news of March
Set Ascending Direction

32 Items

  1. ExtremaRatio - Police I knife - Multi-purpose 2 blades - PRIVATE COLLECTION - knife

    KNIFE RETIRED FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: In very good condition
    * Commercially available NO
    * Sharpness: Original
    * Marks on blade: NO
    * Marks on handle: NO
    * Packaging: YES
    * Checked and Certified by our internal laboratory

    Type of production: Industrial
    Country of production: Italy
    Blade: in N690Co stainless steel
    Finish: Testudo burnishing
    Handle: Anodized aeronautical aluminum anticorodal
    Blade length: 85mm.
    Blade thickness: 2.5mm.
    Total length: 210mm.
    Weight: 152g.
    Sheath: -
    Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificates
    Notes: emergency blade with snap opening (length. 8 cm) - glass breaker - model from 2013 now out of production

    ER-AP-POLICE
    €258.20
    Only 1 left
    Only 1 left
  2. Ka-Bar - Mini Dozier Folding Hunter knife 4072ZG - Zombie Green - knife

    Intended use: tactical

    Blade: AUS 8A stainless steel
    Handle: Zytel
    Blade length: 60mm.
    Blade thickness: 2.5mm.
    Closed length: 87mm.
    Total length: 147mm.
    Balancing:
    Weight: 22g.
    Closure: back lock
    Opening: -
    Clip: in steel


    Design: by Bob Dozier

    Production: Taiwan

    The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

    KB-4072ZG
    €26.23
    Only 1 left
    Only 1 left
  3. ExtremaRatio - BD0 R - Desert - Stone Washed - knife

    It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

    Type of production: industrial
    Blade: stainless steel N690Co 58HRC
    Country of production: Italy
    Handle: Nylon with stainless steel folders
    Blade length: 60mm.
    Blade thickness: 2.5mm.
    Length closed: 95mm.
    Total length: 145mm.
    Weight: 52g.
    Closure: Liner Lock
    Clip: reversible and removable, in stainless steel

    ER-BD0R-DE
    €79.51
    Only 1 left
    Only 1 left
  4. ExtremaRatio - BD0 R - Ranger Green - Stone Washed - knife

    It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

    Type of production: industrial
    Blade: stainless steel N690Co 58HRC
    Country of production: Italy
    Handle: Nylon with stainless steel folders
    Blade length: 60mm.
    Blade thickness: 2.5mm.
    Length closed: 95mm.
    Total length: 145mm.
    Weight: 52g.
    Closure: Liner Lock
    Clip: reversible and removable, in stainless steel

    ER-BD0R-RG
    €79.51
    Only 1 left
    Only 1 left
    Rating:
    93%
    4.7
  5. ExtremaRatio - BD0 R - HCS - Stone Washed - knife

    It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

    Type of production: industrial
    Blade: stainless steel N690Co 58HRC
    Country of production: Italy
    Handle: Nylon with stainless steel folders
    Blade length: 60mm.
    Blade thickness: 2.5mm.
    Length closed: 95mm.
    Total length: 145mm.
    Weight: 52g.
    Closure: Liner Lock
    Clip: reversible and removable, in stainless steel

    ER-BD0R-HC
    €79.51
    Only 1 left
    Only 1 left
  6. ExtremaRatio - BD0 R - Black - Stone Washed - knife

    It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

    Type of production: industrial
    Blade: stainless steel N690Co 58HRC
    Country of production: Italy
    Handle: Nylon with stainless steel folders
    Blade length: 60mm.
    Blade thickness: 2.5mm.
    Length closed: 95mm.
    Total length: 145mm.
    Weight: 52g.
    Closure: Liner Lock
    Clip: reversible and removable, in stainless steel

    ER-BD0R-BK
    €79.51
    Only 1 left
    Only 1 left
  7. ExtremaRatio - BF0 R CD HCS- Stone Washed - knife

    It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model keeps all the features of the BF0 updated with the new High Speed Razor Opening opening system. Available in the following versions: BF0 R CD Desert with stone washed blade and HCS and BF0 R CD Stone Washed with stone washed blade and black grip.

    Type of production: industrial
    Blade: stainless steel N690Co 58HRC
    Country of production: Italy
    Handle: Nylon with stainless steel folders
    Blade length: 55mm.
    Blade thickness: 2.5mm.
    Length closed: 85mm.
    Total length: 140mm.
    Weight: 53g.
    Closure: Liner Lock
    Clip: reversible and removable, in stainless steel

    ER-BF0R-HCS
    €79.51
    Only 1 left
    Only 1 left
  8. ExtremaRatio - BF0CD - Stone Washed - knife

    Type of production: Industrial
    Blade: N690Co 58HRC stainless steel
    Country of production: Italy
    Handle: Nylon
    Blade length: 55mm.
    Blade Thickness: 2.5mm.
    Closed Length: 85mm.
    Overall length: 140mm.
    Weight: 75g.
    locking system: Liner Lock
    Clip: reversible and removable, stainless steel

    ER-BF0-SW
    €79.51
    Only 1 left
    Only 1 left
    Rating:
    95%
    4.8
  9. Fallkniven - TK3 knife - Jigged Bone - coltello

    Destinazione d'uso: sportivo

    Tipo di produzione: industriale
    Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
    Trattamento Lama: -
    Produzione Lama: Sweden
    Manicatura: Acciaio Inox 420J2 e Cervo Ambrato
    Lunghezza lama: 70mm.
    Spessore della lama: 2.5mm.
    Lunghezza chiuso: 95mm.
    Lunghezza totale: 165mm.
    Bilanciatura: -
    Peso: 100g.
    Chiusura: Back Lock
    Clip: -
    Fodero: Nylon
    Note: -
    F-TK3JB
    €274.59
    Only 100 left
    Only 100 left
    Rating:
    100%
    5
  10. Fallkniven - TK3ic knife - Cocobolo - coltello

    Fallkniven Tre Kronor TK3

    La linea "Tre Kronor" fonde le più moderne tecnologie martensitiche con le antiche radici della famiglia reale svedese.
    Questi coltelli, infatti, sono gli unici a potersi fregiare del simbolo reale delle tre corone poste sulla lama e sulla splendida confezione in legno che contiene il coltello ed il fodero.
    L'acciaio laminato utilizzato è attualmente uno dei migliori acciai industriali in commercio ed è composto da una lamina interna in SGPS da polvere, acciaio già utilizzato per il modello U2, a 62HRC accopiato a due guancette esterne in VG2. I coltelli rivelano così eccezionali doti di taglio, penetrazione e tenuta del filo.

    Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
    Manicatura: Legno di Cocobolo
    Lunghezza lama: 70 mm.
    Spessore della lama: 2.5 mm.
    Lunghezza totale: 165 mm.
    Peso: 100 g.
    Chiusura: Backlock
    Fodero: Nero, in cordura
    F-TK3ic
    €266.39
    Only 99 left
    Only 99 left
  11. Fallkniven - LTC Pink rd knife - Slip Joint - 3G Laminated steel - Knife

    The LTC is a gentleman that you can easily carry in your pocket, without a blade lock but with an excellent retention spring once opened. The quality remains the same as any other Fallkniven knife. They have spared no expense when it comes to blade quality. Fallkniven was among the first in the world to introduce a knife with a blade in their famous 3G powder-coated Japanese steel. The blade has grooves on both sides, making it usable for both right and left handed users. The LTC is available in a variety of attractive colors and comes in a beautiful solid wood gift box.

    Intended use: edc

    Type of production: industrial
    Blade: Three-layer laminated 3G stainless steel at 62HRC
    Blade treatment: -
    Blade production: Japan
    Handle: Anodized aluminum
    Blade length: 59mm.
    Blade thickness: 2.5mm.
    Closed length: 81mm.
    Total length: 140mm.
    Weight: 33g.
    Closure: -
    Clips: -
    Notes: wooden box

    F-LTCrd
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  12. LoneWolf - Loveless City knife - Snakewood - knife

    Intended use: Pocket knife

    Type of production: industrial
    Blade: 19C27 stainless steel
    Blade treatment: -
    Handle: snakewood
    Blade length: 60mm.
    Blade thickness: 2.5mm.
    Length closed: 95mm.
    Total length: 160mm.
    Balancing: -
    Weight: 65g.
    Closing: -
    Clip: -
    Notes: aluminum box

    LW-SN
    €90.16
    Out of stock
  13. Fallkniven - PD knife 35 years - SGPS 67 layer steel - Ironwood - knife

    Intended use: collection

    Type of production: industrial
    Blade: 67-layer laminated steel (VG2 and SGPS "Super Gold Powder Stainless Steel" at 62 HRC)
    Blade treatment: -
    Lama production: Japan
    Handle: 420J2 Stainless Steel and Ironwood
    Blade length: 76mm.
    Blade thickness: 3mm.
    Length closed: 100mm.
    Total length: 180mm.
    Balancing: -
    Weight: 72g.
    Closure: Liner Lock
    Clip: -
    Sheath: Nylon
    Notes: Limited Edition to celebrate the 35th anniversary of Fallkniven

    F-PD
    €225.41
    Out of stock
  14. ExtremaRatio - Police I knife - Multi-purpose 2 blades - knife

    Intended use: Emergency and survival multi-purpose knife

    Type of production: Industrial
    Country of production: Italy
    Blade: N690Co stainless steel
    Finish: Testudo burnishing
    Handle: anticorodal anodized aluminum
    Blade length: 85mm.
    Blade thickness: 2.5mm.
    Total length: 210mm.
    Weight: 152g.
    Sheath: -
    Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificates
    Notes: emergency blade with snap opening (length 8 cm) - window breaker - 2013 model now out of production

    ER-POLICE
    €196.72
    Only -99 left
    Only -99 left
    Rating:
    100%
    5
    Out of stock
  15. ExtremaRatio - BF0 R CD - Stone Washed - knife

    It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model keeps all the features of the BF0 updated with the new High Speed Razor Opening opening system. Available in the following versions: BF0 R CD Desert with stone washed blade and HCS and BF0 R CD Stone Washed with stone washed blade and black grip.

    Type of production: industrial
    Blade: stainless steel N690Co 58HRC
    Country of production: Italy
    Handle: Nylon with stainless steel folders
    Blade length: 55mm.
    Blade thickness: 2.5mm.
    Length closed: 85mm.
    Total length: 140mm.
    Weight: 53g.
    Closure: Liner Lock
    Clip: reversible and removable, in stainless steel

    ER-BF0R-SW
    €79.51
    Only 0 left
    Only 0 left
    Out of stock
  16. ExtremaRatio - BF1CT - Damascus Coreless - Limited Edition - knife

    Purpose of use: Collection / Sportsman

    Type of production: Sprint Run, Industrial, Open Number
    Country of production: Prato - Italy
    Blade: Coreless Steel VG10 / VG2 61HRC made in Japan by Takefu Steel
    Blade treatment: chemical detection
    Handle: Anodized aluminum anticorodal
    Blade Length: 70mm.
    Blade thickness: 2.5mm.
    Closed length: 99mm.
    Total Length: 168mm.
    Closure thickness: 11mm.
    Weight: 84g.
    Opening: ambidextrous opening pin
    Washers: in fiberglass
    Closure: Liner Lock
    Clip: stainless steel, deep pocket, removable and reversible
    Packing: Cardboard box with Extrema Ratio logos - Numbered guarantee certificate
    Notes: Limited edition - Each specimen is numbered on the grip and on the internal warranty certificate - Exclusive Product of Coltelleria Collini

     

    ABOUT THE STEEL

    More than just a damask, Coreless steel made by Japanese Takefu Steel comes with over 70 layers of VG10 and VG2 stainless steel welded, forged and coated between them so that you can form a lightweight, slim and durable blade with a spectacular damask outer pattern.

    The peculiarity of Coreless steel, unlike conventional rolled steel or Japanese San-Mai, is that it does not have a hard core steel that is used for the cutting edge but has both the VG10 and VG2 steels arranged to form the cutting edge so alternating and sequential to each other.

    This particular construction gives the blade - compared to the two steels that make it, individually taken - greater resistance to oxidation, higher surface hardness (up to 61.5HRC), 25% more than cutting capacity, 25% more than the wire hold capacity and 25% more resilience making the blade more robust and less subject to breakage.

    Thanks to this latest steel, Takefu Steel has been rewarded on Japanese territory for research and development and innovation in the cutting-edge landscape. Coreless steel has already been chosen by major brands such as Kai and Mcusta Zanmai who since 2017 proposed it on their top productions of professional kitchen knives.



    Coreless Steel

    ER-BF1CT-C
    €192.62
    Rating:
    100%
    5
    Out of stock
  17. ExtremaRatio - BF1CD - Damascus Coreless - Limited Edition - knife

    Purpose of use: Collection / Sportsman

    Type of production: Sprint Run, Industrial, Open Number
    Country of production: Prato - Italy
    Blade: Coreless Steel VG10 / VG2 61HRC made in Japan by Takefu Steel
    Blade treatment: chemical detection
    Handle: Anodized aluminum anticorodal
    Blade Length: 70mm.
    Blade thickness: 2.5mm.
    Closed length: 99mm.
    Total Length: 168mm.
    Closure thickness: 11mm.
    Weight: 84g.
    Opening: ambidextrous opening pin
    Washers: in fiberglass
    Closure: Liner Lock
    Clip: stainless steel, deep pocket, removable and reversible
    Packing: Cardboard box with Extrema Ratio logos - Numbered guarantee certificate
    Notes: Limited edition - Each specimen is numbered on the grip and on the internal warranty certificate - Exclusive Product of Coltelleria Collini

     

    ABOUT THE STEEL

    More than just a damask, Coreless steel made by Japanese Takefu Steel comes with over 70 layers of VG10 and VG2 stainless steel welded, forged and coated between them so that you can form a lightweight, slim and durable blade with a spectacular damask outer pattern.

    The peculiarity of Coreless steel, unlike conventional rolled steel or Japanese San-Mai, is that it does not have a hard core steel that is used for the cutting edge but has both the VG10 and VG2 steels arranged to form the cutting edge so alternating and sequential to each other.

    This particular construction gives the blade - compared to the two steels that make it, individually taken - greater resistance to oxidation, higher surface hardness (up to 61.5HRC), 25% more than cutting capacity, 25% more than the wire hold capacity and 25% more resilience making the blade more robust and less subject to breakage.

    Thanks to this latest steel, Takefu Steel has been rewarded on Japanese territory for research and development and innovation in the cutting-edge landscape. Coreless steel has already been chosen by major brands such as Kai and Mcusta Zanmai who since 2017 proposed it on their top productions of professional kitchen knives.



    Coreless Steel

    ER-BF1CD-C
    €192.62
    Out of stock
  18. Fallkniven - P3Gcfc - Carbon Fiber - knife

    Fallkniven - P3Gcfc - Carbon Fiber - knife

    Intended Use: Sports

    Type of production: industrial
    Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
    Treatment Blade: -
    Blade Production: Sweden
    Handle: 420J2 Stainless Steel and Carbon Fiber
    Blade length: 76mm.
    Blade Thickness: 2.5mm.
    Closed Length: 100mm.
    Overall length: 180mm.
    Balance: -
    Weight: 67g.
    Lock: Liner Lock
    Clip: -
    Sheath: Nylon
    Notes: -

    F-P3GCFC
    €281.15
    Out of stock
  19. Fallkniven - TK3 Oak - knife

    Fallkniven Tre Kronor TK3

    The "Tre Kronor" martensitic combines the latest technology with the ancient roots of the Swedish royal family.
    These knives, in fact, are the only ones that can boast of a real symbol of the three crowns placed on the blade and on the beautiful wooden box containing the knife and sheath.
    The steel laminate used is currently one of the best steel in industrial trade and is composed of a lamina in internal SGPS from dust, steel already used for the U2, to 62HRC coupled to two grips external VG2. The knives reveal so exceptional qualities of cut, penetration and sealing of the wire.

    Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
    Handle material: Oak Wood
    Blade length: 70 mm.
    Blade Thickness: 2.5 mm.
    Total length: 165 mm.
    Weight: 100 g.
    Closure: BackLock
    Sheath: Black Cordura

    F-TK3Q
    €237.70
    Out of stock
  20. Fallkniven - P3G - Quercia - coltello

    Destinazione d'uso: sportivo

    Tipo di produzione: industriale
    Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
    Trattamento Lama: -
    Produzione Lama: Sweden
    Manicatura: Acciaio Inox 420J2 e Quercia
    Lunghezza lama: 76mm.
    Spessore della lama: 2.5mm.
    Lunghezza chiuso: 100mm.
    Lunghezza totale: 180mm.
    Bilanciatura: -
    Peso: 70g.
    Chiusura: Liner Lock
    Clip: -
    Fodero: Nylon
    Note: -
    F-P3GQ
    €185.25
    Only -99 left
    Only -99 left
    Out of stock
  21. Fallkniven - P3G - Blue Bone - coltello

    Destinazione d'uso: sportivo

    Tipo di produzione: industriale
    Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
    Trattamento Lama: -
    Produzione Lama: Japan
    Manicatura: Acciaio Inox 420J2 e Osso Blu
    Lunghezza lama: 76mm.
    Spessore della lama: 2.5mm.
    Lunghezza chiuso: 100mm.
    Lunghezza totale: 180mm.
    Bilanciatura: -
    Peso: 70g.
    Chiusura: Liner Lock
    Clip: -
    Fodero: Nylon
    Note: -
    F-P3GBB
    €172.13
    Out of stock
  22. Fallkniven - P3G - Cocobolo - knife

    Intended Use: sports

    Type of production: industrial
    Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
    Treatment Lama: -
    Production Blade: Sweden
    Handle: Stainless Steel 420J2 and Cocobolo
    Blade length: 76mm.
    Blade Thickness: 2.5mm.
    Closed Length: 100mm.
    Total length: 180mm.
    Balance: -
    Weight: 70g.
    Lock: Liner Lock
    Clip: -
    Sheath: Nylon
    Notes: -

    F-P3G
    €233.61
    Only -99 left
    Only -99 left
    Rating:
    100%
    5
    Out of stock
  23. Fallkniven - P3G - Yellow Bone - knife

    Destinazione d'uso: sportivo

    Tipo di produzione: industriale
    Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
    Trattamento Lama: -
    Produzione Lama: Japan
    Manicatura: Acciaio Inox 420J2 e Osso Giallo
    Lunghezza lama: 76mm.
    Spessore della lama: 2.5mm.
    Lunghezza chiuso: 100mm.
    Lunghezza totale: 180mm.
    Bilanciatura: -
    Peso: 70g.
    Chiusura: Liner Lock
    Clip: -
    Fodero: Nylon
    Note: -
    F-P3GYB
    €172.13
    Out of stock
  24. Fallkniven - TK3 - Mother of Pearl - knife

    Intended Use: sports

    Type of production: industrial
    Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
    Treatment Lama: -
    Production Blade: Sweden
    Handle: 420J2 Stainless Steel and Mother of Pearl
    Blade length: 70mm.
    Blade Thickness: 2.5mm.
    Closed Length: 95mm.
    Total length: 165mm.
    Balance: -
    Weight: 100g.
    Closure: Back Lock
    Clip: -
    Sheath: Nylon
    Notes: -

    F-TK3MOP
    €381.15
    Only 0 left
    Only 0 left
    Out of stock
  25. Fallkniven - TK3 knife Black Quince - coltello

    Fallkniven Tre Kronor TK3

    La linea "Tre Kronor" fonde le più moderne tecnologie martensitiche con le antiche radici della famiglia reale svedese.
    Questi coltelli, infatti, sono gli unici a potersi fregiare del simbolo reale delle tre corone poste sulla lama e sulla splendida confezione in legno che contiene il coltello ed il fodero.
    L'acciaio laminato utilizzato è attualmente uno dei migliori acciai industriali in commercio ed è composto da una lamina interna in SGPS da polvere, acciaio già utilizzato per il modello U2, a 62HRC accopiato a due guancette esterne in VG2. I coltelli rivelano così eccezionali doti di taglio, penetrazione e tenuta del filo.

    Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
    Manicatura: Black Quince
    Lunghezza lama: 70 mm.
    Spessore della lama: 2.5 mm.
    Lunghezza totale: 165 mm.
    Peso: 100 g.
    Chiusura: Backlock
    Fodero: Nero, in cordura
    F-TK3BQ
    €217.21
    Out of stock
  26. Fallkniven - TK3 knife Red Quince - coltello

    Fallkniven Tre Kronor TK3

    La linea "Tre Kronor" fonde le più moderne tecnologie martensitiche con le antiche radici della famiglia reale svedese.
    Questi coltelli, infatti, sono gli unici a potersi fregiare del simbolo reale delle tre corone poste sulla lama e sulla splendida confezione in legno che contiene il coltello ed il fodero.
    L'acciaio laminato utilizzato è attualmente uno dei migliori acciai industriali in commercio ed è composto da una lamina interna in SGPS da polvere, acciaio già utilizzato per il modello U2, a 62HRC accopiato a due guancette esterne in VG2. I coltelli rivelano così eccezionali doti di taglio, penetrazione e tenuta del filo.

    Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
    Manicatura: Radica di Red Quince
    Lunghezza lama: 70 mm.
    Spessore della lama: 2.5 mm.
    Lunghezza totale: 165 mm.
    Peso: 100 g.
    Chiusura: Backlock
    Fodero: Nero, in cordura
    F-TK3RQ
    €217.21
    Out of stock
  27. Fallkniven - TK3 Maroon Micarta - coltello

    Fallkniven Tre Kronor TK3

    La linea "Tre Kronor" fonde le più moderne tecnologie martensitiche con le antiche radici della famiglia reale svedese.
    Questi coltelli, infatti, sono gli unici a potersi fregiare del simbolo reale delle tre corone poste sulla lama e sulla splendida confezione in legno che contiene il coltello ed il fodero.
    L'acciaio laminato utilizzato è attualmente uno dei migliori acciai industriali in commercio ed è composto da una lamina interna in SGPS da polvere, acciaio già utilizzato per il modello U2, a 62HRC accopiato a due guancette esterne in VG2. I coltelli rivelano così eccezionali doti di taglio, penetrazione e tenuta del filo.

    Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
    Manicatura: Micarta Marrone
    Lunghezza lama: 70 mm.
    Spessore della lama: 2.5 mm.
    Lunghezza totale: 165 mm.
    Peso: 100 g.
    Chiusura: Backlock
    Fodero: Nero, in cordura
    F-TK3MM
    €223.77
    Out of stock
  28. Fallkniven - U1 - Cocobolo - knife

    Intended Use: sports

    Type of production: industrial
    Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
    Treatment Lama: -
    Production Blade: Sweden
    Handle: Stainless Steel 420J2 and Cocobolo
    Blade length: 61mm.
    Blade Thickness: 2.5mm.
    Closed Length: 85mm.
    Total length: 148mm.
    Balance: -
    Weight: 72g.
    Closing: -
    Clip: -
    Sheath: Nylon
    Notes: -

    F-U1CB
    €226.23
    Out of stock
  29. Fallkniven - U1 SlipJoint - Blue Bone - Knife

    Intended use: sports

    Type of production: industrial
    Blade: 3-layer laminated 3G steel (VG2 and SGPS "Super Gold Powder Stainless Steel" at 62 HRC)
    Blade finish: satin finish
    Country of production: Japan
    Handle: 420J2 Stainless Steel and Yellow Bone
    Blade length: 61mm.
    Blade thickness: 2.5mm.
    Closed length: 85mm.
    Total length: 148mm.
    Weight: 72g.
    Closure: SlipJoint
    Clip: absent
    Sheath: belt, in nylon, with velcro closure
    Notes: model out of production and no longer available on the market - only a few pieces still available in our warehouses

    F-U1BB
    €159.84
    Out of stock
  30. Fallkniven - U1 SlipJoint - Yellow Bone - knife

    Intended use: sports

    Type of production: industrial
    Blade: 3-layer laminated 3G steel (VG2 and SGPS "Super Gold Powder Stainless Steel" at 62 HRC)
    Blade finish: satin finish
    Country of production: Japan
    Handle: 420J2 Stainless Steel and Yellow Bone
    Blade length: 61mm.
    Blade thickness: 2.5mm.
    Closed length: 85mm.
    Total length: 148mm.
    Weight: 72g.
    Closure: SlipJoint
    Clip: absent
    Sheath: belt, in nylon, with velcro closure
    Notes: model out of production and no longer available on the market - only a few pieces still available in our warehouses

    F-U1YB
    €159.84
    Out of stock
  31. LoneWolf - Loveless City - Buffalo Horn

    Destinazione d'uso: coltello da tasca

    Tipo di produzione: industriale
    Lama: in acciaio inox 19C27
    Trattamento Lama: -
    Manicatura: Corno di Bufalo
    Lunghezza lama: 60mm.
    Spessore della lama: 2.5mm.
    Lunghezza chiuso: 95mm.
    Lunghezza totale: 160mm.
    Bilanciatura: -
    Peso: 65g.
    Chiusura: -
    Clip: -
    Fodero: -
    Note: scatola in alluminio
    1320
    €105.74
    Out of stock
  32. LoneWolf - Loveless City - Micarta knife

    LoneWolf - Loveless City - Micarta knife

    Intended use: Pocket Knife

    Type of production: industrial
    Blade: stainless steel 19c27
    Treatment Blade: -
    Handle: micarta loveless
    Blade length: 60mm.
    Blade Thickness: 2.5mm.
    Closed Length: 95mm.
    Overall length: 160mm.
    Balancing: -
    Weight: 65g.
    Closure: -
    Clip: -
    Notes: aluminum box

    1318
    €90.16
    Out of stock
Set Ascending Direction

32 Items





ecommerce sicuro