bing
News
Best news of March
Shop By
Shopping Options
Brand
  1. Acta Non Verba 10items
  2. Aitor 12items
  3. Antonini 18items
  4. Benchmade 159items
  5. BlackFox 23items
  6. Boker 178items
  7. Cold Steel 103items
  8. Coltelleria Collini 2items
  9. Consigli 54items
  10. CRKT 60items
  11. Extrema Ratio 99items
  12. Fallkniven 72items
  13. Fox Knives 202items
  14. Ka Bar 6items
  15. Kai Knives 1item
  16. Laguiole en Aubrac 80items
  17. Leatherman 1item
  18. Lion Steel 105items
  19. Maserin 199items
  20. Mcusta 69items
  21. Nitecore 1item
  22. Opinel 73items
  23. Roselli 12items
  24. Saji Takeshi 41items
  25. Sanelli 3items
  26. Spyderco 181items
  27. Victorinox 11items
  28. Viper 178items
  29. Zero Tolerance 62items
  30. Approved 133items
  31. ADV Tactical 17items
  32. Ahti 2items
  33. Al-Mar 6items
  34. Andrew Demko Knives 3items
  35. Azero 3items
  36. Bark River 10items
  37. Basko 1item
  38. Bastinelli Knives 4items
  39. Bear and Son 1item
  40. Begg Knives 7items
  41. Benchmark 1item
  42. Beretta 2items
  43. Berkel 1item
  44. Berti 2items
  45. BlachHawk Blades 1item
  46. Blackjack 10items
  47. Bradley 5items
  48. Brian Tighe and Friends 4items
  49. Brusletto 1item
  50. Buck 20items
  51. Carl Schlieper 5items
  52. Case 13items
  53. Cesare Tonelli 7items
  54. Chris Reeve Knives 36items
  55. Citadel 27items
  56. Corey Sar Fox 2items
  57. David 4items
  58. Douk Douk 4items
  59. Down Under Knives 10items
  60. DPX Gear 3items
  61. Eickhorn 3items
  62. Emerson 5items
  63. Enzo 20items
  64. EOS 11items
  65. Esee Knives 8items
  66. Fantoni 36items
  67. Forge de Laguiole 6items
  68. Freeman Outdoor Gear 1item
  69. G. Sakai 4items
  70. Gerber 11items
  71. Gilles 6items
  72. Guardian Tactical 13items
  73. Halcon Spain 3items
  74. Helle 15items
  75. Hikari Japan 5items
  76. Hoffner Knives 11items
  77. Hogue Knives 5items
  78. Hollywood Collectibles Group 8items
  79. Ibberson 1item
  80. Indiana Jones 1item
  81. Jaguar Knives 8items
  82. Kanekoma 5items
  83. Kanetsune 2items
  84. Kershaw 24items
  85. Kiku Knives 1item
  86. Koji Hara 3items
  87. La Cantina 4items
  88. Linder 14items
  89. Lone Wolf 7items
  90. Mac 6items
  91. Master Cutlery 1item
  92. Master of Defense 1item
  93. MedFordKnives 22items
  94. Mercury 2items
  95. Microtech 7items
  96. Mission 4items
  97. MKM 67items
  98. Mora Kniv 14items
  99. Muela 3items
  100. Nepal Kukri 42items
  101. Nieto 5items
  102. Nilte 2items
  103. No Brand 29items
  104. Olamic Cutlery 5items
  105. Ontario 17items
  106. Othello 10items
  107. Piscitelli 2items
  108. Pohl Force 41items
  109. Puma 1item
  110. Quartermaster 13items
  111. Randall 3items
  112. Remington 1item
  113. Rick Hinderer Knives 11items
  114. Rockstead 17items
  115. Sandrin Knives 2items
  116. Sanelli Ambrogio 3items
  117. Santa Fe 2items
  118. Saturn Knives 2items
  119. Sergio Consoli 2items
  120. Smith and Wesson 6items
  121. SOG 31items
  122. Spartan Blades 11items
  123. Stedemon Knife Co. 2items
  124. Steel Will 1item
  125. TB Outdoor 1item
  126. Timberline 1item
  127. Tops Knives 27items
  128. TRC Knives 7items
  129. Tridentum 2items
  130. United Cutlery 17items
  131. Waffentechnik 1item
  132. WanderTactical 66items
  133. White River Knife and Tool 26items
  134. Wildsteer 9items
  135. Windlass 2items
Less
Stock
  1. Out of Stock 79items
Rating
  1. 5
    6items
  2. 4
    & up
    13items
On Sale
  1. On Sale 1item
Set Ascending Direction

Items 1-48 of 79

Page
  1. Wander Tactical - Barracuda Tanto Compound Knife - Raw & Black Micarta - Custom Knife

    Use: EDC / Light Utility / All Round

    Type of Production: Handcrafted
    Country of Production: Italy
    Blade: Integral, D2 steel at 59/61HRC
    Blade Treatment: -
    Handle: Micarta
    Blade Length: 100mm
    Blade Thickness: 5mm
    Total Length: 205mm
    Balance: Rearward
    Weight: 214g
    Sheath: Thermoformed Kydex, with tek-lok attachment
    Package: -
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors, and materials compared to the photographed product

    WT-BARRT-B
    €0.00
    Only -51 left
    Only -51 left
    Out of stock
  2. Wander Tactical - Barracuda knife - Raw & Black Micarta - custom knife

    Use: EDC / Light Utility / All Round

    Type of production: Artisan
    Country of production: Italy
    Blade: integral, in D2 steel at 59 / 61HRC
    Blade treatment: -
    Handle: Micarta
    Blade length: 100mm.
    Blade thickness: 5mm.
    Total length: 205mm.
    Balancing: set back
    Weight: 204g.
    Sheath: in Kydex, thermoformed, with tek-lok type attachment
    Packaging: -
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

    WT-BARR-BL
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  3. Wander Tactical - Raptor - Satin SanMai CoS & Paracord - PRIVATE COLLECTION - craft knife

    Knife withdrawn from a private collection - Limited edition production in Japanese CoS steel in SanMai dating back to 2018 and no longer available - In like new condition, no marks on the blade (never cut, never resharpened) or on the handle. Supplied with handmade Kydex sheath and Wander Tactical certificate - Checked and certified by our in-house Coltelleria Collini laboratory.

    In collaboration with Wander Tactical we have decided to propose their new neck knife, the Raptor model, in an exclusive version with a satin blade that uses the famous Japanese San Mai steel produced by Takefu Steel. Specifically we used, for the central plate, the CoS at 61.5HRC (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

    Use: Neck Knife / Collection

    Type of production: Artisan
    Production Lama: Italy
    Blade: integral, in Japanese laminated stainless steel (San Mai) with cutting edge in CoS at 61.5HRC with cryogenic hardening
    Blade treatment: Satin
    Handle: Paracord
    Blade length: 80mm.
    Blade thickness: 6.5mm.
    Total length: 175mm.
    Balancing: backward
    Weight: 156g.
    Sheath: in Kydex, thermoformed, with lanyard for Neck Knife use
    Packaging: -
    Notes: Each knife is unique and handcrafted

     


    As in the ancient Japanese Samurai swords.

    The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

    - Longer life of the cutting edge
    thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    AP-WT-COS-RA-W
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  4. Wander Tactical - Barracuda knife - Raw & Black Micarta - custom knife

    Use: EDC / Light Utility / All Round

    Type of production: Artisan
    Country of production: Italy
    Blade: integral, in D2 steel at 59 / 61HRC
    Blade treatment: -
    Handle: Micarta
    Blade length: 100mm.
    Blade thickness: 5mm.
    Total length: 205mm.
    Balancing: set back
    Weight: 204g.
    Sheath: in Kydex, thermoformed, with tek-lok type attachment
    Packaging: -
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

    WT-BARR-B
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  5. Wander Tactical - Prototype - PRIVATE COLLECTION - SanMai V-Toku2 & Desert Paracord - custom knife

    Absolutely like new - Comes from a private collection - Unique item made in 2020, prototype, does not correspond to any standard model of Wander Tactical production - Made entirely by hand.

     

    Use: Collection / Utility / Hunting

    Production type: Handcrafted
    Country of Production: Italy
    Blade: integral, japanese rolled steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
    Blade finish: satin finish 
    Handle: Paracord
    Blade length: 90mm.
    Blade thickness: 6.65mm.
    Total length: 200mm.
    Balance: backward
    Weight: 180g.
    Sheath: in kydex
    Package: Certificate of authenticity
    Notes: Unique piece of 2020 - Prototype: it doesn't correspond to any standard model of Wander Tactical production - Entirely hand made - Absolutely like new, coming from a private collection,

     

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Coltelleria Collini, we decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically we have used the carbonaceous V-Toku2 at 62/63HRC for the central plate and the stainless SUS410 for the two external plates, in order to guarantee a very high cutting capacity, penetration and edge holding together with an easy resharpening and maintenance. At the same time the blade has a remarkable resistance to corrosion and an important increase of resilience given by the type of extreme steel and the laminated structure.

    As in the ancient swords of the Japanese Samurai.

    The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: It is made of different types of metals alloyed together to create a composite that contains and intensifies the strengths of the metals taken individually:

    - Longer cutting edge life
    thanks to the use of high quality steels with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performance decidedly superior to those achieved with the use of traditional steels.

    - Greater resilience
    Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Improved corrosion resistance
    The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

    - Easy machining even after heat treatment
    Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

    - Improved aesthetic performance
    Knives made of multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For further information: collinisteel

    WT-PRO-VT
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  6. Wander Tactical - Scrambler knife - Raw Finish & Green Micarta - 6mm - custom knife

    Use: EDC / Light Utility / All Round

    Type of production: Artisan
    Country of production: Italy
    Blade: integral, in D2 steel at 59 / 61HRC
    Blade treatment: Raw Finish
    Handle: Micarta
    Blade length: 90mm.
    Blade thickness: 6mm.
    Total length: 200mm.
    Balancing: set back
    Weight: 223g.
    Sheath: in Kydex, thermoformed, compatible with tek-lok bindings (not supplied) or usable as a neck knife
    Packaging: -
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

    WT-SCR-GM
    €200.82
    Only -50 left
    Only -50 left
    Rating:
    100%
    5
    Out of stock
  7. Wander Tactical - Scrambler knife - Raw Finish & Black Micarta - craft knife

    Use: EDC / Light Utility / All Round

    Type of production: Artisan
    Country of production: Italy
    Blade: integral, in D2 steel at 59 / 61HRC
    Blade treatment: Raw Finish
    Handle: Micarta
    Blade length: 82mm.
    Blade thickness: 5mm.
    Total length: 200mm.
    Balancing: set back
    Weight: 205g.
    Sheath: in Kydex, thermoformed, compatible with tek-lok bindings (not supplied) or usable as a neck knife
    Packaging: -
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

    WT-SCR-BM
    €192.62
    Only -50 left
    Only -50 left
    Out of stock
  8. Wander Tactical - Special Commando knife - Brown Micarta - custom knife

    special knife made by Wander Tactical in April 2021

    Type of production: Artisan
    Production Lama: Italy
    Blade: stainless steel Nitro-B 58 / 59HRC
    Blade treatment: Proto
    Handle: Brown Micarta
    Blade length: 115mm.
    Blade thickness: 5mm.
    Total length: 270mm.
    Balancing: on the branch of gurdia
    Weight: 284g.
    Sheath: in kydex and leather
    Packaging: -
    Notes: unique piece

    WT-SC-BBM
    €483.61
    Only -50 left
    Only -50 left
    Out of stock
  9. Wander Tactical - Special Commando knife - Brown Micarta - custom knife

    special knife made by Wander Tactical in April 2021

    Type of production: Artisan
    Production Lama: Italy
    Blade: stainless steel Nitro-B 58 / 59HRC
    Blade treatment: Proto
    Handle: Brown Micarta
    Blade length: 115mm.
    Blade thickness: 5mm.
    Total length: 270mm.
    Balancing: on the branch of gurdia
    Weight: 284g.
    Sheath: in kydex and leather
    Packaging: -
    Notes: unique piece

    WT-USC-BM
    €483.61
    Out of stock
  10. Wander Tactical - Special Commando knife - Brown Micarta - custom knife

    special knife made by Wander Tactical in April 2021

    Type of production: Artisan
    Production Lama: Italy
    Blade: stainless steel Nitro-B 58 / 59HRC
    Blade treatment: Proto
    Handle: Brown Micarta
    Blade length: 115mm.
    Blade thickness: 5mm.
    Total length: 270mm.
    Balancing: on the branch of gurdia
    Weight: 284g.
    Sheath: in kydex and leather
    Packaging: -
    Notes: unique piece

    WT-SC-BM
    €483.61
    Only -50 left
    Only -50 left
    Out of stock
  11. Wander Tactical - Dagger Tool - Limited Edition - craft knife

    Use: Tactics / collection

    Type of production: Artisan
    Production Lama: Italy
    Blade: integral, D2 steel
    Blade treatment: gun cote heart
    Handle: black micarta
    Blade length: 110mm.
    Blade thickness: 5mm.
    Total length: 240mm.
    Balancing: set back
    Weight: 200g.
    Sheath: in Kydex, thermoformed
    Packaging: -
    Notes: WT Limited Exclusive Project - Single Edge - Wander Tactical Certified

    WT-DA-MI
    €262.30
    Rating:
    100%
    5
    Out of stock
  12. Wander Tactical - Raptor knife - SanMai V-Toku2 & Green Paracord - kydex brown - custom knife

    Japanese steel blends with Italian excellence

    For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an easy regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

    RAPTOR model:

    Use: Tactical / Utility

    Type of production: Artisan
    Production Lama: Italy
    Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
    Blade finish: satin finish
    Handle: Paracord
    Blade length: 75mm.
    Blade thickness: 6.5mm.
    Total length: 178mm.
    Balancing: set back
    Weight: 149g.
    Sheath: in brown kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient Japanese Samurai swords.

    The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

    - Longer life of the cutting edge

    thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

    - Greater resilience
    built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-RAP-VT-B
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  13. Wander Tactical - Prototype X-020 knife - Green paracord - custom knife

    special prototype made by Wander Tactical in October 2020

    Type of production: Artisan
    Production Lama: Italy
    Blade: stainless steel Nitro-B 58 / 59HRC
    Blade treatment: -
    Handle: Green paracord
    Blade length: 115mm.
    Blade thickness: 5mm.
    Total length: 260mm.
    Balancing: on the branch of gurdia
    Weight: 201g.
    Sheath: in kydex
    Packaging: -
    Notes: unique piece

    WT-X020
    €241.80
    Only -50 left
    Only -50 left
    Out of stock
  14. Wander Tactical - Tryceratops knife Clip Point - SanMai V-Toku2 & Black Micarta - custom knife

    Japanese steel blends with Italian excellence

    For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of extrene steel and by the laminated structure.

    Tryceratops model .:

    Use: Tactical / Utility

    Type of production: Artisan
    Production Lama: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 70mm.
    Blade thickness: 6.5mm.
    Total length: 130mm.
    Balancing: set back
    Weight: 188g.
    Sheath: in kydex black
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient Japanese Samurai swords.

    The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

    - Longer tool life

    thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

    - Greater resilience
    built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-TRY-C-VT
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  15. Wander Tactical - Primitive Dagger Tool - Limited Edition - custom knife

    Use: Tactics / collection

    Type of production: Artisan
    Production Lama: Italy
    Blade: integral, D2 steel
    Blade treatment: dual tone
    Handle: black micarta
    Blade length: 110mm.
    Blade thickness: 5mm.
    Total length: 240mm.
    Balancing: set back
    Weight: 200g.
    Sheath: in Kydex, thermoformed
    Packaging: -
    Notes: WT exclusive project limited to 5 pieces - single edge - Wander Tactical certified

    WT-DAG-P
    €262.30
    Out of stock
  16. Wander Tactical - Raptor knife - SanMai V-Toku2 & Green Paracord - custom knife

    Japanese steel blends with Italian excellence

    For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an easy regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of extrene steel and by the laminated structure.

    RAPTOR model:

    Use: Tactical / Utility

    Type of production: Artisan
    Production Lama: Italy
    Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
    Blade finish: satin finish
    Handle: Paracord
    Blade length: 75mm.
    Blade thickness: 6.5mm.
    Total length: 178mm.
    Balancing: set back
    Weight: 149g.
    Sheath: in green kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient Japanese Samurai swords.

    The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

    - Longer tool life

    thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

    - Greater resilience
    built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-RAP-VT
    €0.00
    Only -50 left
    Only -50 left
    Rating:
    93%
    4.7
    Out of stock
  17. Wander Tactical - Scrambler knife - SanMai V-Toku2 & Black Micarta - custom knife

    In collaboration with Wander Tactical we have decided to propose the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese San Mai steel produced by Takefu Steel.
    This time, in the rich catalog of products they offer, we have chosen a particular steel with a carbonaceous edge, but with external stainless steel cheeks. Specifically we used, for the central plate, the carbonaceous V-Toku2 at 62 / 63HRC and the SUS410 for the external lamination in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening and maintenance; at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the laminated structure.
    Use: EDC / Light Utility / All Round

    Type of production: Artisan
    Production Lama: Italy
    Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
    Blade treatment: Satin
    Handle: Micarta
    Blade length: 82mm.
    Blade thickness: 6.8mm.
    Total length: 200mm.
    Balancing: set back
    Weight: 229g.
    Sheath: in Kydex, thermoformed, with belt loop
    Packaging: certificate of authenticity
    Notes: unique and exclusive piece

    As in the ancient Japanese Samurai swords.

    The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

    - Longer tool life

    thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

    - Greater resilience
    built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-SC-VT
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  18. Wander Tactical - Scrambler knife - SanMai V-Toku2 & Desert Micarta - coltello custom

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    SCRAMBLER Model .:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 95mm.
    Blade thickness: 6.5mm.
    Total length: 210mm.
    Balancing: backward
    Weight: 212g.
    Sheath: brown kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-SC-VT-D
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  19. LoneWolf - Loveless City knife - Snakewood - knife

    Intended use: Pocket knife

    Type of production: industrial
    Blade: 19C27 stainless steel
    Blade treatment: -
    Handle: snakewood
    Blade length: 60mm.
    Blade thickness: 2.5mm.
    Length closed: 95mm.
    Total length: 160mm.
    Balancing: -
    Weight: 65g.
    Closing: -
    Clip: -
    Notes: aluminum box

    LW-SN
    €90.16
    Out of stock
  20. Wander Tactical - Tryceratops Compound knife - SanMai V-Toku2 & Brown Micarta - custom knife

    Japanese steel blends with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable corrosion resistance and an important increase in resilience given by the type of foreign steel and the laminated structure.

    Tryceratops Model .:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbonaceous) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 70mm.
    Blade thickness: 6.5mm.
    Total length: 130mm.
    Balancing: backward
    Weight: 184g.
    Sheath: brown kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

     

    WT-TR-VT-C
    €241.80
    Only -50 left
    Only -50 left
    Out of stock
  21. Wander Tactical - Raptor compound knife - SanMai V-Toku2 & OD black Paracord - custom knife

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    RAPTOR model:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Paracord
    Blade length: 75mm.
    Blade thickness: 6.5mm.
    Total length: 178mm.
    Balancing: backward
    Weight: 136g.
    Sheath: black kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-R-VT-C
    €241.80
    Out of stock
  22. Wander Tactical - Scrambler knife - SanMai V-Toku2 & Black Micarta - custom

    In collaboration with Wander Tactical we have decided to offer their heavy duty, the Smilodon model, in an exclusive satin blade version that uses the famous Japanese San Mai steel produced by Takefu Steel.

    This time, in the rich catalog of products offered by them, we chose a particular steel with a carbon cutting edge, but with external stainless steel cheeks. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the SUS410 for external lamination in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance; at the same time the blade has a remarkable corrosion resistance and an important increase in resilience given by the laminated structure.

    Use: EDC / Light Utility / All Round

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade treatment: Satin
    Handle: Micarta
    Blade length: 82mm.
    Blade thickness: 6.8mm.
    Total length: 200mm.
    Balancing: backward
    Weight: 215g.
    Sheath: Kydex, thermoformed, with belt loop
    Packaging: certificate of authenticity
    Notes: unique and exclusive piece

    WT-SC-VT2B
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  23. Wander Tactical - Scrambler knife - SanMai V-Toku2 & Brown Micarta - custom knife

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    SCRAMBLER Model .:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 95mm.
    Blade thickness: 6.5mm.
    Total length: 210mm.
    Balancing: backward
    Weight: 212g.
    Sheath: brown kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-TR-VT2
    €225.41
    Out of stock
  24. Wander Tactical - Raptor knife - SanMai V-Toku2 & OD green Paracord - custom knife

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    RAPTOR model:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Paracord
    Blade length: 75mm.
    Blade thickness: 6.5mm.
    Total length: 178mm.
    Balancing: backward
    Weight: 136g.
    Sheath: black kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-RAP-VT2
    €229.51
    Out of stock
  25. Wander Tactical - Lynx knife - SanMai V-Toku2 & Brown Micarta - custom knife

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    Lynx Model:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 107mm.
    Blade thickness: 6.5mm.
    Total length: 237mm.
    Balancing: backward
    Weight: 310g.
    Sheath: brown leather
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-LY-VT2
    €409.84
    Out of stock
  26. Wander Tactical - Scrambler knife - SanMai V-Toku2 & Brown Micarta - custom knife

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    SCRAMBLER Model .:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 95mm.
    Blade thickness: 6.5mm.
    Total length: 210mm.
    Balancing: backward
    Weight: 212g.
    Sheath: brown kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-SC-VT2R
    €278.69
    Out of stock
  27. Wander Tactical - Uro knife - SanMai V-Toku2 & Brown Micarta - custom knife

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    URO model .:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 145mm.
    Blade thickness: 6.5mm.
    Total length: 300mm.
    Balancing: backward
    Weight: 436g.
    Sheath: in black leather
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-UR-VT2-BR
    €450.82
    Out of stock
  28. Wander Tactical - Uro knife - SanMai V-Toku2 & Brown Micarta - special custom

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    URO model .:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 145mm.
    Blade thickness: 6.5mm.
    Total length: 300mm.
    Balancing: backward
    Weight: 436g.
    Sheath: in black leather
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-UR-VT2BRS
    €479.51
    Out of stock
  29. Wander Tactical - Uro knife - SanMai V-Toku2 & Black Micarta - special custom

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    URO model .:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 145mm.
    Blade thickness: 6.5mm.
    Total length: 300mm.
    Balancing: backward
    Weight: 436g.
    Sheath: in black leather
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-UR-VT2BS
    €479.51
    Out of stock
  30. Wander Tactical - Uro knife - SanMai V-Toku2 & Black Micarta - custom knife

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    URO model .:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 145mm.
    Blade thickness: 6.5mm.
    Total length: 300mm.
    Balancing: backward
    Weight: 436g.
    Sheath: in black leather
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-UR-VT2B
    €450.82
    Out of stock
  31. Wander Tactical - Haast Eagle knife - SanMai V-Toku2 & Black Micarta - Unique piece

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    Haast Eagle model .: unique piece.

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 135mm.
    Blade thickness: 6.5mm.
    Total length: 285mm.
    Balancing: backward
    Weight: 378g.
    Sheath: in black leather
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

     

     

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel
    Send feedback
    History
    Saved
    Community

    WT-HE-VT2
    €450.82
    Out of stock
  32. Wander Tactical - Scrambler - Satin sanmai Cos & Brown Micarta - custom knife

    In collaboration with "Wander Tactical" We decided to bring their EDC, the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

    Occupation: EDC / Light Utility / All Round

    Type of production: Custom
    Country of production: Italy
    Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
    Blade treatment: Satin Raw
    Handle: Micarta
    Blade length: 82mm.
    Blade thickness: 6.8mm.
    Overall length: 200mm.
    Balancing: backward
    Weight: 215g.
    Sheath: Kydex, compatible with tek-lok attacks (not supplied) or used as a neck knife
    Packaging: -
    Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

    WT-T2-RMB
    €0.00
    Only -50 left
    Only -50 left
    Rating:
    100%
    5
    Out of stock
  33. Wander Tactical - Smilodon Satin SanMai CoS & Black Green Micarta - craft knife

    In collaboration with Wander Tactical we have decided to propose their heavy duty, the Smilodon model, in an exclusive satin blade version that uses the famous Japanese steel San Mai produced by Takefu Steel. Specifically, for the central plate we used the 61.5HRC CoS (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and oxidation resistance.

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese rolled stainless steel (San Mai) with 61.5HRC CoS cutting in cryogenic quenching
    Blade treatment: satin
    Handle: Micarta
    Blade length: 180mm.
    Blade thickness: 6.5mm.
    Total length: 340mm.
    Balancing: set back
    Weight: 605g.
    Sheath: Kydex, thermoformed, with Tek-Lok type connection
    Package: -
    Notes: unique and exclusive piece.

    WT-T2-SMB
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  34. Wander Tactical - Kobura Kiridashi Knife Green - by TheFence - Limited Edition

    Kiridashi knife designed by TheFence and handcrafted by Wander Tactical - Limited edition of 50 pieces

    Use: EDC / Light Utility / All Round

    Type of production: Artisan
    Country of production: Italy
    Blade: integral, in D2 steel at 59 / 61HRC
    Blade treatment: Raw Finish
    Handle: Paracord
    Blade length: 60mm.
    Blade thickness: 6.5mm.
    Total length: 155mm.
    Balancing: set back
    Weight: 50g.
    Sheath: in Kydex, thermoformed
    Design: by Claudio Colombo of TheFence
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, compared to the photographed product - Limited edition of 50 pieces

    Review by Alessandra De Santi

    From collector to author of reviews, to designers: the step was short for Claudio Colombo who, in a short time, decided to put his passion and experience to use by designing his own knife, the Kobura.
    Inspired by the kiridashi, the Kobura (cobra in Japanese) revisits the essential lines of what was originally a typical Japanese instrument used to carve wood, but also a small daily utility knife used (especially by children) to tip pencils , cut paper, ropes, etc.

    The Kobura, an EDC with an aggressive and appealing appearance, is made of D2 steel hardened to 59-61 HRC; the knife is equipped with a short chisel blade (61 mm) and extremely robust (thickness 5.5 mm). On the back there is a practical anti-slip knurling for the thumb. On the side without bevel is the Valknut, a Norse symbol used as the logo of TheFence.

    TheFence is a team of shooting instructors with different specialties and experiences. Claudio attended courses with Rob Pincus (of which he is one of the two instructors in Italy), Gabriel Suarez and Scott Reitz (formerly L.A. Swat and instructor); one of the partners is an Active Shooters Response instructor, and another one has deepened Israeli techniques.

    WT-KOBURA-G
    €94.26
    Out of stock
  35. Wander Tactical - Kobura Kiridashi Knife Black - by TheFence - Limited Edition

    Kiridashi knife designed by TheFence and handcrafted by Wander Tactical - Limited edition of 50 pieces

    Use: EDC / Light Utility / All Round

    Type of production: Artisan
    Country of production: Italy
    Blade: integral, in D2 steel at 59 / 61HRC
    Blade treatment: Raw Finish
    Handle: Paracord
    Blade length: 60mm.
    Blade thickness: 6.5mm.
    Total length: 155mm.
    Balancing: set back
    Weight: 50g.
    Sheath: in Kydex, thermoformed
    Design: by Claudio Colombo of TheFence
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, compared to the photographed product - Limited edition of 50 pieces

    Review by Alessandra De Santi

    From collector to author of reviews, to designers: the step was short for Claudio Colombo who, in a short time, decided to put his passion and experience to use by designing his own knife, the Kobura.
    Inspired by the kiridashi, the Kobura (cobra in Japanese) revisits the essential lines of what was originally a typical Japanese instrument used to carve wood, but also a small daily utility knife used (especially by children) to tip pencils , cut paper, ropes, etc.

    The Kobura, an EDC with an aggressive and appealing appearance, is made of D2 steel hardened to 59-61 HRC; the knife is equipped with a short chisel blade (61 mm) and extremely robust (thickness 5.5 mm). On the back there is a practical anti-slip knurling for the thumb. On the side without bevel is the Valknut, a Norse symbol used as the logo of TheFence.

    TheFence is a team of shooting instructors with different specialties and experiences. Claudio attended courses with Rob Pincus (of which he is one of the two instructors in Italy), Gabriel Suarez and Scott Reitz (formerly L.A. Swat and instructor); one of the partners is an Active Shooters Response instructor, and another one has deepened Israeli techniques.

    WT-KOBURA-B
    €94.26
    Out of stock
  36. Wander Tactical - Hurricane Folder knife III Generation - Black Aluminum - folding knife

    Intended use: Heavy Duty / Hiking / Tactical / Collection

    Type of production: industrial
    Country of production: Italy
    Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
    Blade treatment: Stonwash
    Handle: titanium folders with aluminum handle
    Blade length: 90mm.
    Blade thickness: 5mm.
    Closed length: 120mm.
    Total length: 210mm.
    Thick when closed: 13.6mm.
    Balancing: -
    Weight: 160g.
    Opening: Carson Flipper system / ambidextrous opening pins on the blade
    Washers: in steel, with ball bearings made in Japan
    Closing: Rockers Arm 8.11
    Clip: titanium, removable and reversible
    Sheath: -
    Packaging: Plastic case with Wander Tactical logos
    Notes: 3rd generation 2019 production

    WT-H3-SW
    €209.02
    Out of stock
  37. Wander Tactical - Mistral Folder knife III Generation - Black Aluminum - folding knife

    Intended use: Heavy Duty / Hiking / Tactical / Collection

    Type of production: industrial
    Country of production: Italy
    Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
    Blade treatment: Stonwash
    Handle: titanium folders with aluminum handle
    Blade length: 90mm.
    Blade thickness: 5mm.
    Closed length: 120mm.
    Total length: 210mm.
    Thick when closed: 13.6mm.
    Balancing: -
    Weight: 160g.
    Opening: Carson Flipper system / ambidextrous opening pins on the blade
    Washers: in steel, with ball bearings made in Japan
    Closing: Rockers Arm 8.11
    Clip: titanium, removable and reversible
    Sheath: -
    Packaging: Plastic case with Wander Tactical logos
    Notes: 3rd generation 2019 production

    WT-M3-SW
    €209.02
    Rating:
    87%
    4.4
    Out of stock
  38. Wander Tactical - Mini Bad Medicine knife - Satin & Green Paracord - Limited Edition

    Use: EDC / Light Utility / All Round

    Type of production: Artisan
    Country of production: Italy
    Blade: integral, in steel D2 at 59 / 61HRC
    Blade treatment: -
    Handle: Paracord
    Blade length: 97mm.
    Blade thickness: 6.5mm.
    Total length: 204mm.
    Balancing: set back
    Weight: 170g.
    Sheath: in Kydex, thermoformed, with tek-lok type connection
    Package: -
    Notes: Limited edition single piece

    WT-MBM
    €245.08
    Out of stock
  39. Wander Tactical - Raptor - Satin CoS SanMai & Green Paracord - custom knife

    In collaboration with Wander Tactical we decided to propose their new neck knife, the Raptor, in an exclusive satin-blade version that uses the famous SanMai japanese steel produced by Takefu Steel. For the central plate we have chose the CoS with 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 with 56 HRC for the two side plates in order to ensure high cutting capacity but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

     

    Use: Neck Knife / Collection

    Type of production: handmade
    Production Country: Italy
    Blade: Full tang with japanese laminated (SanMai) 61.5HRC CoS stainless steel with cryogenic temper
    Blade treatment: Satin
    Handle: Paracord
    Blade length: 80mm.
    Blade thickness: 6.5mm.
    Overall length: 175mm.
    Balancing: backward
    Weight: 156g.
    Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
    Packaging: -
    Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

    WT-RP-SM
    €196.72
    Out of stock
  40. Wander Tactical - Compound Scrambler - Raw Finish & Desert Micarta - craft knife

    Use: EDC / Light Utility / All Round

    Type of production: Artisan
    Country of production: Italy
    Blade: integral, in steel D2 at 59 / 61HRC
    Blade treatment: Raw Finish and satin
    Handle: Micarta
    Blade length: 90mm.
    Blade thickness: 6.5mm.
    Total length: 203mm.
    Balancing: set back
    Weight: 230g.
    Sheath: Kydex, thermoformed, compatible with tek-lok attachments (not supplied) or usable as neck knife
    Package: -
    Notes: This model is unique and handcrafted

    WT-SC-C
    €233.61
    Out of stock
  41. Wander Tactical - Hurricane Lava Flow Custom - Bronze Finish and G10 Jade - folding knife

    Single piece custom version of the standard Hurricane model - blade, folders, clips and screws modified by hand by the Wander Tactical knife designer Dino Picco - The finish of the "Bronze" blade is obtained through a natural oxidation process that takes place at the end of the hardening phase cryogenic.

    Type of production: semi-industrial
    Lama production: Italy
    Blade: in steel D2 at 59 / 60HRC
    Lama treatment: Bronze flow
    Manicure: Aluminum (alluminium)
    Blade length: 90mm.
    Blade thickness: 5mm.
    Total length: 215mm.
    Balancing: set back
    Weight: 187g.
    Package: -
    Notes: clip, blade lock Rockers Arm 8.11 - safety pin

    WT-HU-C
    €450.82
    Out of stock
  42. Wander Tactical - Tryceratops Satin D2 & Micarta Black - custom knife

    Wander Tactical - Tryceratops Earth & Desert Micarta - custom knife

    Intended use: Tactical / Collection

    Type of production: Artisan
    Production Lama: Italy
    Blade: Stainless D2 59 / 60HRC
    Treatment Lama: -
    Handle: Micarta
    Blade length: 65 mm.
    Blade thickness: 5.5 mm.
    Overall length: 132 mm.
    Balancing: back
    Weight: 176 g.
    Sheath: Artisan, Kydex black with tek-Lok
    Packaging: -
    Notes: every knife is unique as it is handmade, might therefore be small differences / inaccuracies with respect to the photographed model, also with regard to colors of blade and handle.

    WT-T-B
    €127.05
    Out of stock
  43. Wander Tactical - Smilodon Satin SanMai CoS & Black Green Micarta - craft knife

    In collaboration with Wander Tactical we have decided to propose their heavy duty, the Smilodon model, in an exclusive satin blade version that uses the famous Japanese steel San Mai produced by Takefu Steel. Specifically, for the central plate we used the 61.5HRC CoS (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and oxidation resistance.

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese rolled stainless steel (San Mai) with 61.5HRC CoS cutting in cryogenic quenching
    Blade treatment: satin
    Handle: Micarta
    Blade length: 180mm.
    Blade thickness: 6.5mm.
    Total length: 340mm.
    Balancing: set back
    Weight: 605g.
    Sheath: Kydex, thermoformed, with Tek-Lok type connection
    Package: -
    Notes: unique and exclusive piece.

    WT-SM-SM
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  44. Wander Tactical - Tryceratops - SanMai CoS & Green Micarta - custom knife

    In collaboration with Wander Tactical we decided to propose one of their most iconic knives, the Tryceratops model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

    Application: outdoor / hunting

    Type of production: handmade
    Production Country: Italy
    Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
    Blade treatment: Satin
    Handle: Micarta
    Blade length: 70mm.
    Blade thickness: 6.8mm.
    Overall length: 130mm.
    Balancing: backward
    Weight: 210g.
    Sheath: Kydex, thermoformed, with Tek-Lok system
    Packaging: -
    Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

    COS-TR-GM
    €139.34
    Out of stock
  45. Wander Tactical - Freedom - Satin SanMai CoS & Black Green Micarta - craft knife

    In collaboration with Tactical Wander we decided to bring them light utility, the Lynx model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

    Application: Light Utility / All Round

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese rolled stainless steel (San Mai) with 61.5HRC CoS cutting in cryogenic quenching
    Lama treatment: Satin
    Handle: Micarta
    Blade length: 120mm.
    Blade thickness: 6.8mm.
    Total length: 245mm.
    Balancing: set back
    Weight: 366g.
    Sheath: Kydex, thermoformed, with Tek-Lok type connection
    Package: -
    Notes: unique and exclusive piece.

    WT-FREE-SM
    €303.28
    Rating:
    93%
    4.7
    Out of stock
  46. Wander Tactical - Barracuda - Satin & Desert Micarta - Limited Edition

    Knife born from the collaboration between Wander Tactical and Safer Faster Defense

    Use: EDC / Light Utility / All Round

    Type of production: Artisan
    Country of production: Italy
    Blade: integral, in steel D2 at 59 / 61HRC
    Blade treatment: -
    Handle: Micarta
    Blade length: 100mm.
    Blade thickness: 6.5mm.
    Total length: 200mm.
    Balancing: set back
    Weight: 235g.
    Sheath: Kydex, thermoformed, with tek-lok attachment
    Package: -
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the product photographed - Limited edition of 5 pieces

    WT-BARR
    €0.00
    Only -50 left
    Only -50 left
    Rating:
    93%
    4.7
    Out of stock
  47. Wander Tactical - Raptor - Satin CoS SanMai & Green Paracord - custom knife

    In collaboration with Wander Tactical we decided to propose their new neck knife, the Raptor, in an exclusive satin-blade version that uses the famous SanMai japanese steel produced by Takefu Steel. For the central plate we have chose the CoS with 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 with 56 HRC for the two side plates in order to ensure high cutting capacity but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

     

    Use: Neck Knife / Collection

    Type of production: handmade
    Production Country: Italy
    Blade: Full tang with japanese laminated (SanMai) 61.5HRC CoS stainless steel with cryogenic temper
    Blade treatment: Satin
    Handle: Paracord
    Blade length: 80mm.
    Blade thickness: 6.5mm.
    Overall length: 175mm.
    Balancing: backward
    Weight: 156g.
    Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
    Packaging: -
    Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

    WT-COS-RA-O
    €196.72
    Out of stock
  48. Wander Tactical - Scrambler - Satin SanMai Cos & Gray Paracord - custom knife

    In collaboration with "Wander Tactical" We decided to bring their EDC, the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

    Occupation: EDC / Light Utility / All Round

    Type of production: Custom
    Country of production: Italy
    Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
    Blade treatment: Satin Raw
    Handle: Paracord
    Blade length: 82mm.
    Blade thickness: 6.8mm.
    Overall length: 200mm.
    Balancing: backward
    Weight: 215g.
    Sheath: Kydex, compatible with tek-lok attacks (not supplied) or used as a neck knife
    Packaging: -
    Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

    WT-SC-PA
    €229.51
    Out of stock
Set Ascending Direction

Items 1-48 of 79

Page




ecommerce sicuro