bing
News
Best news of March
Shop By
Shopping Options
Brand
  1. Antonini 1item
  2. Benchmade 2items
  3. Boker 6items
  4. Extrema Ratio 1item
  5. Fallkniven 4items
  6. Fox Knives 1item
  7. Laguiole en Aubrac 2items
  8. Maserin 11items
  9. Opinel 1item
  10. Victorinox 2items
  11. Berkel 1item
  12. Buck 1item
  13. Enzo 1item
  14. Jaguar Knives 1item
  15. Lone Wolf 0items
  16. MKM 3items
Less
Stock
  1. In Stock 1item
  2. Out of Stock 2items
Rating
  1. 5
    1item
Set Ascending Direction

3 Items

  1. Antonini knives - Old Bear knife in SanMai VG10 at 67 layers - 19cm - walnut - Limited Edition

    Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.

    The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.

    To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade

    Type of production: semi artisanal
    Production Lama: Italy
    Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
    Handle: in walnut wood
    Blade length: 80mm.
    Blade thickness: 2.5mm.
    Closed length: 109mm.
    Thick when closed: 22mm.
    Total length: 190mm.
    Weight: 46g.
    Closure: viro block

    The handles are made of antique and oiled walnut wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.

    As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.

    The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.

    Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

    - Longer life of the cutting edge
    thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: Collini Steel

    AE-9305/19_LN
    €90.16
    Only 15 left
    Only 15 left
    Rating:
    100%
    5
  2. Laguiole En Aubrac - Le Camembert - Pistachio Wood - knife

    The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.

    This knife is dedicated to Camembert and is sold in the round wooden box typical of this famous cheese known throughout the world.

    Intended use: Regional/Collection

    Type of production: artisanal
    Blade: Stainless steel 12C27
    Country of production: France
    Handle: Pistachio wood
    Blade length: 80mm.
    Blade thickness: 2.6mm.
    Length closed: 110mm.
    Total length: 193mm.
    Weight: 88g.
    Closure: Rear retention spring
    Clip: -
    Sheath: -
    Notes: wooden box

    CB-PIST
    €110.65
    Only 0 left
    Only 0 left
    Out of stock
  3. Laguiole En Aubrac - Double Spring - Juniper

    Laguiole En Aubrac - Double Spring - Juniper

    Intended use: Sport

    Type of production: Industrial
    Production Blade: France
    Blade: Stainless steel 12C27
    Treatment Blade: satin
    Handle: Wood Juniper
    Blade length: 98mm.
    Blade thickness: 2.5mm.
    Length closed: 119mm.
    Total length: 217mm.
    Thick when closed: 20mm.
    Balance: -
    Weight: 102g.
    Closure: A double spring
    Clip: -
    Sheath: -
    package:
    Notes:

    10745
    €176.21
    Out of stock
Set Ascending Direction

3 Items





ecommerce sicuro