Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

SERIAL NUMBER 0231

* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Limited series, discontinued
* Sharpening: Factory
* Marks on blade: Slight, uneven treatment in places (factory, not due to wear)
* Marks on handle: No
* Box: Present and original, WITH AUTOGRAPH SIGNATURE OF LYNN THOMPSON
* Scabbard: Not present
* Manuals, Certificates and Warranties: no
* Checked and certified by our in-house laboratory

Intended use: Sporting/EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel Carpenter CTS XHP Alloy 59/60HRC
Blade treatment: DLC
Handle: Griv-Ex
Blade length: 135mm.
Blade thickness: 3.6mm.
Length closed: 170mm.
Total length: 304mm.
Weight: 208g.
Closure: Back Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with Cold Steel logos
Notes: Numbered and limited edition (serial no. 0231) with signature of "Lynn C. Thompson" laser engraved on the blade and in pen on the packaging

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

* Type: Previously Purchased
* Condition: in like-new condition with perfect original box
* Commercially available Discontinued since 2013
* Sharpening: Original edge
* Marks on blade: no
* Marks on handle: no
* Box: yes
* Scabbard: no
* Manuals, Certificates and Guarantees: no
* Checked and certified by our in-house laboratory

Intended use: Sporting / Utility

Production type: Industrial
Country of manufacture: Japan
Blade: SANMAI stainless steel
Blade finish: Satin finish
Handle: Micarta and Titanium
Blade length: 115mm
Blade thickness: 4mm.
Total length: 235mm.
Weight: 152g.
Closure: Liner Lock
Clip: Stainless steel
Packaging: aluminium box with Cold Steel logos
Notes: -

For almost a decade, Cold Steel® offered a wicked-looking little boot knife called the Culloden®. It was based on the traditional Scottish 'black knife' or 'Skean Dhu' as it is more commonly called in Gaelic, the ancient language of Scotland.

The Caledonian Edge™ features a number of modern variations and refinements over its predecessor. The blade is made of a virtually unbreakable San Mai III® construction and, like the original Skean Dhu, features a thin, sharp point, as sharp as the proverbial needle. 

The traditional tang seen on the Skean Dhu of yesteryear has been retained and provides an aggressive, non-slip platform for the thumb and forefinger, allowing for better control when using the blade to cut or pierce.

The handle of the Caledonian Edge™ has a profile that hugs the palm of the hand and a relatively thin cross-section that enhances its qualities. It is flat enough not to roll or twist in the palm of the hand, yet comfortable enough to accommodate a wide range of grip styles. A perfect blend of strength and beauty, it features a mirror-polished black Micarta superstructure and titanium bolsters.ne handed opening.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

The first and original Tanto "Made in Japan", here in a 1980's version with a San Mai steel blade, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto.

* Type: Previously Purchased
* Condition: very good, never used, some light surface marks (visible against the light)
* Commercially available Out of production
* Sharpening: Original wire
* Marks on blade: yes, superficial
* Marks on handle: no
* Box: no
* Scabbard: Present - Original, in good general condition, some marks present
* Manuals, Certificates and Warranties: no
* Checked and certified by our internal laboratory

Intended use: Collection

Type of production: Industrial
Country of manufacture: Japan
Blade: San Mai steel - Made in Japan
Blade treatment: satin finish
Handle: Kraton with brass guard and pommel
Blade length: 145m
Blade thickness: 4.7mm.
Total length: 285mm.
Balance: recessed
Weight: 268g.
Sheath: Black leather, branded "Japan".
Packaging: without original box
Notes: Knife from a private collection, first series, produced in the 1980s and out of production since the 1990s, overall in very good condition.

Knife withdrawn from a private collection - In like new condition - Comes with original box - Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Blade treatment: -
Handle: Aluminum 7075 and G-10
Blade length: 195mm.
Blade thickness: 4mm.
Total length: 425mm.
Thick when closed: -
Balancing: -
Weight: 425g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note: -

Knife from a private collection - The first and original Tanto "Made in Japan", here in the second series from 1986, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto - Overall in very good condition, with no particular scratches, marks or abrasions on blade and handle; a few small marks of time on scabbard - Product still has original factory sharpening, although it would need a brightening-no signs of wear anyway - Supplied with its own original leather scabbard marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: Japan
Blade: made of "Cold Steel's 400 Series Stainless" steel (presumably 420 stainless)
Blade treatment: satin finish
Handle: made of Kraton with brass guard and pommel
Blade length: 145m.
Blade thickness: 5mm.
Total length: 285mm.
Balance: backward
Weight: 259g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.

Knife from a private collection - First series, first generation, the first and original "Made in USA" Trailmaster from 1988 - Overall in good condition, shows small signs of oxidation on the blade and some minor signs of time on the leather sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath, but lacking box and manuals - Checked and certified by our in-house lab.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: USA
Blade: Carbon V steel
Blade treatment: satin finish
Handle: kraton and brass
Blade length: 240mm.
Blade thickness: 8mm.
Total length: 370mm.
Balance: advanced
Weight: 515g.
Sheath: black leather
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988, overall in good condition.

Knife from a private collection - The first and original Magnum Tanto "Made in Japan" from 1988, progenitor of the modern generation continued with the Magnum Tanto II in 1990 - Overall in very good condition, with no particular scratches, marks or abrasions on blade, handle and sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: Japan
Blade: stainless steel AUS-8A
Blade treatment: satin finish
Handle: kraton
Blade length: 230mm.
Blade thickness: 5mm.
Total length: 370mm.
Balance: advanced
Weight: 330g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.

Knife from a private collection - The original Recon Tanto "Made in USA" of the '90s, progenitor of the current generation - Absolutely like new, never taken out of the box, still with the original factory grease on the blade, sheath without signs of use and knife insertion - Complete, with original box and Cold Steel warranty - Checked and certified by our internal laboratory.

Intended use: collection / tactical / sporting

Production type: Industrial
Country of Production: USA
Blade: Carbon V steel
Blade treatment: varnishing
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balancing: advanced
Weight: 265g.
Scabbard: Simil-leather
Package: Cardboard box with Cold Steel and "Made in USA" logos
Notes: Knife from a private collection - Made in the late 90's (presumably 1997/1998) - Absolutely like new

Intended Use: Sporting/EDC

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN 59/60HRC
Blade Treatment: Satin finish
Handle: Aluminum T6061 mirror polished with G10 inserts
Blade length: 89mm.
Blade thickness: 3.8mm.
Length closed: 120mm.
Total length: 209mm.
Weight: 125g.
Closure: Liner Lock with additional safety catch on the right handle
Clip: Stainless steel, removable
Package: Cardboard box with Cold Steel logos
Notes: Numbered and limited edition of only 3500 pieces with signature of "Lynn C. Thompson" laser engraved on the blade and pencilled on the product packaging.

FROM COLD STEEL WEBSITE

The Oyabun Limited is a high-end collector's version of our Oyabun. It shares features in common with the standard model in terms of functionality and appearance, but differs greatly in the materials used in its construction. It also has the value of being a collectible keepsake as only 3500 were produced. Each one is serially numbered and each box will be personally signed by Lynn C. Thompson himself! The blade's fine S35VN steel is an expensive powder coated steel that is heat treated to Rc 59-60 and hardened to sub zero. It has been given an attractive two-tone finish on the blade planes and a high satin polish on the blade bevels. Notably, the handle frame is milled from two solid billets of 6061 aluminum to create the bolster and pommel, which has been given a beautiful mirror polished finish. The handle also features CNC-machined G-10 plates with a diamond checkerboard pattern for a good, secure grip.

"I like flashy knives and when they are limited collector's editions with serial numbers made from high quality materials, I like them even more. That's why I think you'll like our Oyabun Limited. Only 3500 pieces will be made. All individually serial numbered with 6061 aluminum frames, CNC machined handles that are completely checkered just like my much original and a two-tone polished S35VN blade! And best of all, all this splendor and high performance is backed by our state-of-the-art leaf spring lock and secondary safety, so you know it won't bend on your hand. Now you have a knife that is worth every penny asked (just compare) and has tremendous appeal/appreciation from collectors!!!" - Lynn Thompson

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade finish: Satin finish
Handle: Kray-Ex™
Blade length: 82mm.
Blade thickness: 3mm.
Total length: 168mm.
Weight: 93.5g.
Scabbard: Secure-Ex® thermoplastic material
Packaging: Cardboard box with Cold Steel logos
Note: the package does not include the sheath's docking system or attachment system.

Intended Use: Sporting / Hunting

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade Finish: Polished
Handle: Kray-Ex™
Blade length: 165mm.
Blade thickness: 3.5mm.
Total length: 298mm.
Weight: 159g.
Scabbard: Secure-Ex® in thermoplastic material
Packaging: Cardboard box with Cold Steel logos
Notes: Made in collaboration with Tim Wells, one of the most famous bow and skeet hunters in the world.

Intended use: tactical / sports

Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel laminated with cutting edge in VG-10
Blade treatment: satin finish
Handle: Kray-Ex (Kraton)
Blade length: 155mm.
Blade thickness: 5mm.
Total length: 275mm.
Balancing: on the guard branch
Weight: 249g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos
Notes: new production 2018

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN
Blade treatment: DLC coating
Handle: G10
Blade length: 102mm.
Blade thickness: 3.5mm.
Length closed: 136mm.
Total lenght: 238mm.
Thickness when closed: 13mm.
Weight: 147g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Package: cardboard box with Cold Steel logos
Notes: -

The Special Forces Shovel takes its cue directly from the military spade used by the Soviet Spetnaz, one of the elite corps of the former Soviet Union.

The head of the spade is forged in painted carbon steel and has a utility / ax sharpening that can easily be resumed to give a razor sharpening; the handle is instead in wood.

Blade: in painted carbon steel
Handle: American walnut wood
Total length: 76.2cm.
Width: 15cm.
Thickness: 2.5mm
Weight: 1003g.

Intended use: Sports / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Satin finish
Handle: aluminum and G-10
Blade length: 90mm.
Blade thickness: 3.7mm.
Total length: 220mm.
Weight: 185g.
Closing: Scorpion Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew Demko

Intended use: Sports / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Satin finish
Handle: G-10
Blade length: 91mm.
Blade thickness: 3.8mm.
Total length: 223mm.
Weight: 202g.
Closing: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew Demko

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Taiwan
Blade: AUS-10A stainless steel
Blade treatment: Stonewashed
Handle: G-10
Blade length: 191mm.
Blade thickness: 4mm.
Total length: 425mm.
Thick when closed: 10.4mm
Weight: 403g.
Closing: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note: -

Intended use: Sports / Hunting / Collection

Type of production: Industrial
Country of production: Taiwan
Blade: carbon steel O-1
Blade treatment: satin finish
Handle: micarta, with brass guard
Blade length: 269mm.
Blade thickness: 7.6mm.
Total length: 399mm.
Balancing: advanced
Weight: 483g.
Sheath: in ABS, of the SecurEx type
Packaging: cardboard box with Cold Steel logos
Note: -

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel AUS-8A
Blade treatment: Satin
Handle: G10
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 178mm.
Weight: 68g.
Closure: Tri-Ad Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Cold Steel logos
Note: -

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel AUS-8A
Blade treatment: Satin
Handle: GFN
Blade length: 76mm.
Blade thickness: 3.5mm.
Closed length: 98mm.
Total length: 174mm.
Weight: 94g.
Closure: Tri-Ad Lock
Clip: integrated, in GFN
Packaging: Cardboard box with Cold Steel logos
Notes: Design by Andrew Demko

Purpose: Sportsman / EDC

Type of production: Industrial
Country of Origin: Taiwan
Blade: Stainless steel 1.4116
Blade treatment: Stone washed
Handle: GFN
Blade Length: 89mm.
Blade thickness: 3mm.
Closed length: 114mm.
Overall length: 203mm.
Weight: 85g.
Closure: Tri-Ad Lock
Clip: Removable and reversible, stainless steel
Packing: Cardboard box with Cold Steel logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Taiwan
Blade: 4033 stainless steel
Blade treatment: Satin finish
Handle: Zy-Ex
Blade length: 92mm.
Blade thickness: 3.3mm.
Length closed: 122mm.
Total length: 212mm.
Thick when closed: 14mm.
Weight: 120g.
Closure: Liner Lock with additional safety catch on the right handle
Clip: stainless steel, removable
Packaging: cardboard box with Cold Steel logos
Notes: opening system by carson flipper system - Design by Wes Crawford

Use: Sporting 

Production Type: Industrial
Country of Production: Taiwan
Blade: stainless steel AUS-8A
Blade finishing: stonewashed
Handle: Kray-Ex kraton
Blade Length: 229mm.
Blade thickness: 4,7mm.
Total length: 359mm.
Balance: on guard branch
Weight: 352g.
Scabbard: Secur-Ex Thermoplastic
Packaging: cardboard box with Cold Steel logos
Notes: -

Sturdy bowie knife with clip point blade made of steel with a high carbon content.

Employment: Sports / Collection

Type of production: seeds / craft
Lama production: India
Blade: 1085 High Carbon steel
Lama treatment: burnishing
Handle: rose wood
Blade length: 305mm.
Blade thickness: 6.2mm.
Total length: 440mm.
Balancing: set back
Weight: 658g.
Sheath: in leather and metal
Package: -
Note:

Intended use: Hiking

Type of production: Industrial
Country of production: South Africa
Blade: 1055 carbon steel
Blade treatment: black protective paint
Handle: Polypropylene
Blade length: 330mm.
Blade thickness: 3mm.
Total length: 470mm.
Balancing: Advanced
Weight: 566g.
Opening: Carson Flipper system
Sheath: Nylon with rigid plastic parts
Packaging: Transparent plastic bag
Note: -

Designed by Mike Wallace, the Immortal model was inspired by the shape of the famous Roman dagger

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Taiwan
Blade: CTS-XHP 60 / 61HRC stainless steel
Blade treatment: Satin
Handle: G10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 120mm.
Total length: 220mm.
Thick when closed: 10mm.
Weight: 168g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with Cold Steel logos
Note: -

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Taiwan
Blade: CTS-XHP 60 / 61HRC stainless steel
Blade treatment: Satin
Handle: G10
Blade length: 102mm.
Blade thickness: 3.5mm.
Length closed: 142mm.
Total length: 244mm.
Thick when closed: 10mm.
Weight: 136g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with Cold Steel logos
Note: -

Purpose: Sportsman / EDC

Type of production: Industrial
Country of Origin: Taiwan
Blade: Stainless steel 1.4116
Blade treatment: Stone washed
Handle: GFN
Blade Length: 89mm.
Blade thickness: 3mm.
Closed length: 114mm.
Overall length: 203mm.
Weight: 85g.
Closure: Tri-Ad Lock
Clip: Removable and reversible, stainless steel
Packing: Cardboard box with Cold Steel logos

Intended use: Sports / Tactical

Type of production: Industrial
Production Country: Taiwan
Blade: CTS-XHP Stainless Steel 60 / 61HRC
Blade treatment: DLC coating
Handle: G10
Blade length: 102mm.
Blade thickness: 3.5mm.
Closed Length: 136mm.
Overall length: 238mm.
Thick when closed: 13mm.
Weight: 147g.
Closing: Tri-Ad Lock
Clip: removable and reversible, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -

Intended use: Sports / EDC

Type of production: Industrial
Production Country: Taiwan
Blade: 1.4116 stainless steel
Blade treatment: Satin finish
Handle: GFN
Blade length: 89mm.
Blade thickness: 3mm.
Closed Length: 114mm.
Overall length: 203mm.
Weight: 88g.
Closing: Tri-Ad Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Cold Steel logos
Notes: -

Intended Use: Hunting

Type of production: Industrial
Production Country: Japan
Blade: AUS-8A stainless steel
Blade treatment: satin finish
Handle: ABS
Blade length: 82mm.
Blade thickness: 2 mm.
Overall length: 184mm.
Weight: 39g.
Sheath: Secure-Ex in ABS
Packaging: Sealed box with Cold Steel logos
Notes: -

Intended use: Sport / Hunting

Type of production: Industrial
Pase production: Taiwan
Blade: CPM-3V steel
Blade treatment: Black DLC
Handle: Kraton
Blade length: 114mm.
Blade thickness: 4.8mm.
Overall length: 235mm.
Balancing: back to 1cm from the guard branch
Weight: 168g.
Sheath: ABS
Packaging: cardboard box with Cold Steel logos
Notes: -

Intended use: Sports / Tactical

Type of production: Industrial
Production Country: Taiwan
Blade: CTS-XHP Stainless Steel 60 / 61HRC
Blade treatment: Satin finish
Handle: G10
Blade length: 139mm.
Blade thickness: 4mm.
Closed Length: 190mm.
Overall length: 324mm.
closed Thickness: 13mm.
Weight: 234g.
Closing: Tri-Ad Lock
Clip: removable and reversible, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew Demko

Intended use: Sports / Tactical

Type of production: Industrial
Production Country: Taiwan
Blade: CTS-XHP Stainless Steel 60 / 61HRC
Blade treatment: Satin finish
Handle: G10
Blade length: 139mm.
Blade thickness: 4mm.
Closed Length: 190mm.
Overall length: 324mm.
closed Thickness: 13mm.
Weight: 234g.
Closing: Tri-Ad Lock
Clip: removable and reversible, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew Demko

Utilisation: Sport

Type de production: industriel
Lame de production: Taiwan
Lame: acier inoxydable AUS 10A
Traitement de la lame: délavé
Manche: Grivory
Longueur de la lame: 114 mm.
Épaisseur de lame: 4mm.
Longueur fermé: 152 mm.
Longueur totale: 266mm.
Épaisseur une fois plié: -
Equilibrage: -
Poids: 260g.
Fermoir: Tri-Ad verrouillage
Clips: acier inoxydable amovible
Gaine: -
Conditionnement: boîte en carton avec des logos de Cold Steel
Notes: -

Intended Use: Sport / Tactician

Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-10A stainless steel
Treatment Lama: -
Handle: Grivory
Blade length: 152mm.
Blade thickness: 4mm.
Closed Length: 180mm.
Overall length: 335mm.
Thick when closed: -
Balancing: -
Weight: 224g.
Clasp: Tri-Ad Lock
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos Cold Steel
Notes: -

Intended use: Survival / Collection

Blade: stainless steel
Lama Lama production
Handle: Dark brown leather
Blade length: 290mm.
Blade thickness: 7mm.
Length closed: -
Total length: 460mm.
Balancing: advanced to 4 cm.
Weight: 1.098g.
Closure: -
Clip: -
Sheath: in leather
Notes: Official reproduction with movie license

Specifications:
Blade Length: 16"
Overall Length: 22"
Steel: 1055 Carbon Steel w/ Black Baked on Anti Rust Matte Finish
Weight: 23.4 oz
Blade Thickness: 2.8 mm
Handle: 5 5/8" Long. Polypropylene
Sheath: Cor-Ex™ Sheath

Made from tough rigid 1055 carbon steel with a strong spring temper, it's virtually unbreakable and offers the weight forward balance necessary to chop through vines, saplings, and brush and even trees with ease. What's more, its sharp point offers plenty of belly for slashing or even skinning, and in an emergency, adds to it value as an improvised self defense tool. Sold fully sharpened, and shipped with a sturdy nylon sheath, it's ready for your jungle wherever it may be.

Direttamente dal remake cinematografico firmato da Michel Gondry, il set di coltelli da lancio utilizzato da Kato, il fido compagno di Green Hornet (il calabrone verde). Tre pezzi, da esporre su un elegante display laccato nero. Edizione ufficiale (su licenza Columbia Pictures), limitata a 2000 pezzi e numerata progressivamente.

Lama: Acciaio 420
Lunghezza totale: 152 mm.
Larghezza lama: 73 mm.
Spessore lama: 2.5 mm.
Peso: 52 g.
Bilanciatura: centrale
Note: -

Intended Use: Sport / Tactical

Type of production: Industrial
Production Blade: Taiwan
Blade: Stainless steel AUS-8A
Treatment Blade: Teflon
Handle: G-10
Blade length: 101mm.
Blade thickness: 3.5mm.
Length closed: 136mm.
Total length: 238mm.
Thick when closed: -
Balance: -
Weight: 150g.
Clasp: Tri-Ad Lock
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos Cold Steel
Notes: -

Destinazione d'uso: Sportivo/Caccia

Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8A - 55/57HRC
Trattamento Lama:
Manicatura: Grivory
Lunghezza lama: 100mm.
Spessore lama: 3mm.
Lunghezza chiuso: 123mm.
Lunghezza totale: 224mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 152g.
Chiusura: Molle di ritenzione su entrambi i manici
Clip: Amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Cold Steel
Note: non utilizzabile come un coltello balisong/butterfly

Destinazione d'uso: Sportivo

Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8A
Trattamento Lama: Satinatura
Manicatura: G-10
Lunghezza lama: 89mm.
Spessore lama: 4mm.
Lunghezza chiuso: 134mm.
Lunghezza totale: 216mm.
Peso: 156g.
Chiusura: Tri-Ad Lock
Clip: Reversibile e amovibile, in acciaio inox
Confezione: scatola in cartone con loghi Cold Steel
Note: Modello fuori produzione, unico esemplare a nostra disposizione

Intended use: Tactical / Utility

Type of production: Industrial
Production Lama: China
Blade: 1055 carbon steel
Blade treatment: epoxy paint
Handle: Polypropylene
Blade length: 175mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 303mm.
Balancing: on the guard branch
Weight: 340g.
Closing: -
Clip: -
Sheath: SecureEx
Packaging: cardboard box with Cold Steel logos
Note: -

Cold Steel - Hold Out II - 11HL knife

Intended use: Sport

Type of production: Industrial
Production Blade: Taiwan
Blade: Stainless steel AUS-8A
Treatment Lama: -
Handle: G-10
Blade length: 95mm.
Blade thickness: 3mm.
Closed Length: 130mm.
Total length: 223mm.
Thick when closed: 9mm.
Balance: -
Weight: 118g.
Clasp: Tri-Ad Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Cold Steel
Notes: -

Destinazione d'uso: machete

Tipo di produzione: industriale
Lama: in acciaio al carbonio 1050
Produzione Lama: Sud Africa
Manicatura: PVC
Lunghezza lama: 460mm.
Spessore della lama: 2mm.
Lunghezza totale: 600mm.
Bilanciatura: avanzata, a 14,5cm. dall'impugnatura
Peso: 460g.
Fodero: in Nylon e ABS
Note: -

New version, equipped with a Nylon blade serrated sheath on the back

Intended use: machete

Type of production: industrial
Blade: 1050 carbon steel
Lama production: South Africa
Handle: PVC
Blade length: 610mm.
Blade thickness: 2mm.
Length closed: -
Total length: 755mm.
Balancing: advanced, at 23cm. from the handle
Weight: 560g.
Closing: -
Clip: -
Sheath: in nylon
Note: -

Destinazione d'uso: Sportivo / Caccia

Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: In acciaio inox laminato VG-1 San Mai III
Trattamento Lama: -
Manicatura: Kraton
Lunghezza lama: 117mm.
Spessore lama: 4.5mm.
Lunghezza totale: 235mm.
Bilanciatura: Arretrata ad 1cm dal ramo di guardia
Peso: 176g.
Chiusura: -
Clip: -
Fodero: ABS
Confezione: scatola in cartone con loghi Cold Steel
Note: -

Destinazione d'uso: Sportivo/EDC

Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: in acciaio inox AUS-8A
Manicatura: Grivory
Lunghezza lama: 50mm.
Spessore lama: 3mm.
Lunghezza chiuso: 80mm.
Lunghezza totale: 130mm.
Peso: 42g.
Chiusura: Tri-Ad Lock
Clip: Acciaio inox
Confezione: Scatola di cartone con loghi Cold Steel