Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Fallkniven - F1 Pro Knife Survival Kit - USED - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory
Intended Use: Hiking / All round utilityBlade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather caseF-F1PRO-CP -
Fallkniven - F1 Wolf - VG-10W Laminated and Leather Sheath - knife
New "Wolf" version using a steel enriched with 1.25% Tungsten (also known as Wolfram in chemistry) which makes the edge tougher, more resilient and provides greater sharpness retention.
Intended use: tactical/military/huntingBlade: full tang in San-Mai VG-10Wolf / 420J2 59HRC stainless steel
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: set back 2.5cm from the lower guard branch.
Weight: 150g.
Sheath: leather
Notes: official knife of Swedish Air Force pilots since 1995.F-F1LW -
Fallkniven - F1xB Utility Knife - Elmax Steel - Tungsten Carbide Finish - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of Production: Japan
Blade: full tang, stainless steel Elmax at 61/62HRC
Blade finishing: black coating (Tungsten Carbide)
Handle: Thermorun
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XBElmax -
Fallkniven - R2 Scout Survival - Elmax - knife
Intended use: Hiking / Utility
Production type: industrial
Country of production: Japan
Blade: hidden tang, Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 80mm.
Blade thickness: 4.8mm.
Total length: 181mm.
Balance: set back 2cm. from the guard branch
Weight: 132g.
Scabbard: zytel
Notes: Sharpening convex typeF-R2Z-Scout -
Fallkniven - Taiga Forester - TF1 - SanMai CoS Steel - Desert Ironwood - knife
Intended Use: Hiking / Hunting / Collection
Production type: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade Treatment: Satin finish
Handle: Desert Ironwood
Blade Length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 230g.
Sheath: zytel
Notes: -F-TF1Z -
Fallkniven - Taiga Forester - TF2 - SanMai CoS Steel - thermorun - knife
Intended use: Hiking / Hunting
Type of production: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade treatment: Satin finish
Handle: Thermorun
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 185g.
Scabbard: zytel
Notes: -F-TF2Z -
Fallkniven - H1 Zytel knife - CoS steel - knife
Available only with Zytel sheath - discontinued leather sheath
Intended use: hunting
Type of production: Industrial
Production Lama: Japan
Blade: full tang in San-Mai CoS / 420J2 59HRC stainless steel
Blade treatment: -
Handle: Thermorun E
Blade length: 100mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 215mm.
Thick when closed: -
Balance: set back, at 2cm.
Weight: 188g.
Closing: -
Clip: -
Sheath: in Zytel
Packaging: white cardboard box with Fallkniven logos
Note: -F-H1 -
Fallkniven - Taiga Hunter knife - TH - SanMai CoS Steel - thermorun - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.If you look at function and most value for money, the rubber-handle Taiga blades should be preferred. Regardless of the weather and wind, the rubber handle gives a really good grip and when it comes to the steel properties they are of course as good as the knives with wooden handles.Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -F-TH2Z -
Fallkniven - Taiga knife SK2L - SanMai CoS Steel - ironwood - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.As shown in the design, TH1 is a handmade knife with a handle in the very exclusive desert ironwood (lat. Olneya tesota). This species is not listed in CITES Annexes or the IUCN Red List of Endangered Species and is therefore legal to use. Like all natural materials, it varies in texture and color, making each knife an individual creation. A beautifully veined pattern may look attractive but a straight, patterned handle is actually stronger. Desert ironwood, which grows in the southwestern United States, has a somewhat peculiar quality – it is heavier than water, its density is 1.2 kg/dm³ which means it will sink. If you want to maintain or even increase the luster in the wood, treat it with log oil, furniture oil, bench oil or other type of wood oil containing linseed oil. The fact that the blade goes full width through the handle (so-called full tang blade) results in a very strong and reliable construction and gives a comfortable weight to the knife.Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -F-TH1Z -
Fallkniven - Embla knife SK2L - SanMai CoS Steel - ironwood - knife
Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -F-SK2L -
Fallkniven - S1x Survival Knife - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
CommunityF-S1X -
Fallkniven - S1xb Survival Knife Black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
CommunityF-S1XB -
Fallkniven - F1x Pilot Knife - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 95mm.
Blade thickness: 5mm.
Total length: 222mm.
Balancing: set back to 2cm. from the guard branch
Weight: 222g.
Closing: -
Sheath: in zytel
Note: -F-F1X -
Fallkniven - A1x Expedition Knife - outdoor knife - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in kydex
Note: -F-A1X -
Fallkniven - A1 BLK - knife
Intended Use: Tactical / Military
Blade: full tang stainless steel San-Mai VG-10/420J2 59HRC coated black Ceracoat 8H
Handle: Kraton
Blade length: 160mm.
Blade thickness: 6mm.
Length closed:-mm.
Total length: 280mm.
Balance: advanced to 0.5cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Zytel tactical
Notes:F-A1BLZ -
Fallkniven - A1 Zytel knife - coltello
Destinazione d'uso: sportivo/caccia/militare
Lama: full tang in acciaio inox San-Mai VG-10/420J2 59HRC
Manicatura: Kraton
Lunghezza lama: 160mm.
Spessore della lama: 6mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 280mm.
Bilanciatura: avanzata a 0.5cm. dal ramo di guardia inferiore
Peso: 305g.
Chiusura: -
Clip: -
Fodero: in zytel
Note:F-A1Z -
Fallkniven - A2 - knife
Survival knife - News from the Swedish company larger than the A1 model.
Thanks to its extreme solidity, strength and hardness, it lends itself easily to the most extreme and hard.
- Steel blade VG10 from 200 mm to a thickness of 6 mm
- Total length 330 mm
- Weight 380 grams
- Black leather sheathF-A2 -
Fallkniven - F1 BLK - knife
Intended Use: Tactical / Military / Hunting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2 with black Teflon coating
Handle: It Thermorun
Blade length: 105mm.
Blade Thickness: 4.5mm.
Closed Length: - mm.
Total length: 215mm.
Balance: back to 2.5 cm from the lower branch of the guard
Weight: 150g.
Closing: -
Clip: -
Sheath: Kydex
Notes: knife official Swedish Air Force pilots since 1995F-F1BL -
Fallkniven - NL1 - Thor - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 254mm.
Blade Thickness: 7mm.
Length closed:-mm.
Total length: 385mm.
Balance: advanced to 3.5 cm. the branch of lower guard
Weight: 520g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL1 -
Fallkniven - NL2 - Odin - knife
The Fallkniven Odin (first in importance among the Celtic gods) is the second model after Thor in order of size, the beautiful Northern Light series.
The knife is handmade using only top quality materials.Intended Use: collection / Survival
Type of production: Industrial
Production Blade: Japan
Blade: VG10 (HRC 59)
Treatment Lama: -
Handle material: Polymer
Blade length: 200mm.
Blade thickness: 6.5 mm.
Length closed: -
Total length: 325mm.
Thick when closed: -
Balance: -
Weight: 380g.
Closing: -
Clip: -
Sheath: leather, exquisite workmanship and robustness.
Packaging: cardboard box
Notes:F-NL2 -
Fallkniven - NL3 - Njord - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 150mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 268mm.
Balance: advanced to 0.5 cm. the branch of lower guard
Weight: 280g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL3 -
Fallkniven - NL4 - Frey - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 244mm.
Balance: backward to 1 cm. the branch of lower guard
Weight: 190g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL4 -
Fallkniven - NL5 - Idun - knife
Fallkniven Sweden - Idun (Celtic god of fertility and youth) is a very compact with excellent finishes, perfect for use of hunting - The knife is handmade using only top quality materials
Intended Use: collection / Survival
Type of production: Industrial
Production Blade: Japan
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: -
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 170g.
Closing: -
Clip: -
Sheath: leather, exquisite workmanship and robustness.
Packaging: cardboard box
Notes:F-NL5 -
Fallkniven - NL5cx - Idun Damasco - coltello
Destinazione d'uso: collezione/caccia
Tipo di produzione: industriale
Lama: in acciaio damasco "Cowry-X" 64HRC
(3%C 20%Cr 1%Mo 0.3%V)
Trattamento Lama: -
Manicatura: anelli di cuoio con guardia e cap in nickel silver
Lunghezza lama: 100mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Bilanciatura: -
Peso: 180g.
Chiusura: -
Clip: -
Fodero: cucito a mano, in cuoio
Note: -F-NL5CX -
Fallkniven - PHK - knife
Intended Use: Sport / Hunting
Type of production: Industrial
Production Blade: Japan
Blade: 3G stainless steel, three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Treatment Blade:
Handle: Thermorun And with stainless guard
Blade length: 127mm.
Blade thickness: 5mm.
Length closed -
Total length: 240mm.
Thick when closed: -
Balance: backward, to 1.5cm from the guard
Weight: 194g.
closing time:
Clip: -
Sheath: Zytel
Packaging: cardboard box with logos Fallkniven
Note: Each piece is numberedF-PHK -
Fallkniven - S1 knife Black Zytel - coltello
Destinazione d'uso: sportivo/caccia/militare
Lama: full tang in acciaio inox San-Mai VG-10/420J2 59HRC con rivestimento nero CeraCoat 8H
Manicatura: Thermorun E
Lunghezza lama: 130mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 247mm.
Bilanciatura: in corrispondenza del ramo di guardia inferiore
Peso: 190g.
Chiusura: -
Clip: -
Fodero: Zytel
Note:F-S1BLZ -
Fallkniven - S1 Zytel - knife
Intended Use: Sport / Hunting / Military
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: It Thermorun
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 247mm.
Balance: at the lower branch of the guard
Weight: 190g.
Closing: -
Clip: -
Sheath: Zytel
Notes:F-S1Z -
Fallkniven - SK1 Jarl Betulla - fodero in cuoio - coltello
Destinazione d'uso: Caccia
Tipo di produzione: industriale
Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
Trattamento Lama: -
Produzione Lama: Giappone
Manicatura: Legno di Betulla
Lunghezza lama: 100mm.
Spessore della lama: 4,5mm.
Lunghezza totale: 210mm.
Bilanciatura: arretrato di 1 cm dal ramo di guardia
Peso: 134g.
Fodero: Cuoio
Note: -F-SK1 -
Fallkniven - SK3 Juni Birch - leather sheath - knife
Intended Use: Hunting
Type of production: industrial
Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Treatment Lama: -
Production Blade: Japan
Handle: Birch Wood
Blade length: 69mm.
Blade Thickness: 3mm.
Total length: 145mm.
Balance: backlog of 1 cm from the branch guard
Weight: 54g.
Sheath: Leather
Notes: -F-SK3 -
Fallkniven - TK3ic knife - Cocobolo - coltello
Fallkniven Tre Kronor TK3
La linea "Tre Kronor" fonde le più moderne tecnologie martensitiche con le antiche radici della famiglia reale svedese.
Questi coltelli, infatti, sono gli unici a potersi fregiare del simbolo reale delle tre corone poste sulla lama e sulla splendida confezione in legno che contiene il coltello ed il fodero.
L'acciaio laminato utilizzato è attualmente uno dei migliori acciai industriali in commercio ed è composto da una lamina interna in SGPS da polvere, acciaio già utilizzato per il modello U2, a 62HRC accopiato a due guancette esterne in VG2. I coltelli rivelano così eccezionali doti di taglio, penetrazione e tenuta del filo.
Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
Manicatura: Legno di Cocobolo
Lunghezza lama: 70 mm.
Spessore della lama: 2.5 mm.
Lunghezza totale: 165 mm.
Peso: 100 g.
Chiusura: Backlock
Fodero: Nero, in corduraF-TK3ic -
Fallkniven - F1x Utility Knife - Elmax Steel - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XElmax -
Fallkniven - Survival knife S1 Pro - Knife
Intended Use: Hiking / Hunting
Blade: hidden tang, in CoS to 60HRC rolled stainless steel
Handle: Thermorun, with guard in stainless steel
Blade length: 130mm.
Blade Thickness: 7mm.
Overall length: 247mm.
Balancing: Advanced to 0.5cm. the branch of the lower guard
Weight: 268g.
Sheath: Zytel
Notes: cardboard box with Fallkniven logosF-S1PRO -
Fallkniven - A1xb Expedition Knife Black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in zytel
Note: -F-A1XB -
Fallkniven - F1xb Pilot Knife black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 95mm.
Blade thickness: 5mm.
Total length: 222mm.
Balancing: set back to 2cm. from the guard branch
Weight: 222g.
Closing: -
Sheath: in zytel
Note: -F-F1XB -
Fallkniven - Survival F1 Pro - knife
Intended Use: Hiking / Hunting
Blade: hidden tang, in CoS to 60HRC rolled stainless steel
Handle: Thermorun, with guard in stainless steel
Blade length: 100mm.
Blade Thickness: 7mm.
Overall length: 215mm.
Balancing: Advanced to 0.5cm. the branch of the lower guard
Weight: 178g.
Sheath: Zytel
Notes: cardboard box with Fallkniven logos, watertight box in ABS with Fallkniven logos, sharpening stone Fallkniven DC4 with leather pouchF-F1PRO -
Forge de Laguiole - Philippe Starck - Jojo long legs - coltello formaggio - fuori produzione
Laguiole en Aubrac - Philippe Starck - Jojo long legs - coltello formaggio All'inizio degli anni '80, nel villaggio di Laguiole in Aubrac, l'arte della coltelleria di Laguiole era scomparsa... Nel 1987 la fabbrica Forge de Laguiole rilancia la produzione di mitici coltelli nel suo villaggio d'origine, rispettando l'eredità dell'arte della tradizione. È la rinascita di un coltello cult, referenza del design, sinonimo di qualità e arte di vivere. Ogni coltello è un pezzo unico che può richiedere diversi giorni di produzione! Un solo coltellinaio altamente qualificato realizza, in più di 40 fasi, un coltello d'eccezione, che durerà una vita. Tra tradizione e creazione, Forge de Laguiole apporta un tocco di innovazione, rivolgendosi ai più grandi designer. Questo splendido coltello da formaggio firmato Philippe Starck ha un elegante manico in bachelite nera Presentato all'esposizione universale di Siviglia nel 1992, ha permesso a Forge de Laguiole di ricevere il premio del Design Europeo.
Elegante, le sue linee inimitabili ed essenziali ne fanno un vero capolavoro d'equilibrio ed estetica. La forma del manico è stata semplicemente studiata perchè il coltello possa rimanere in equilibrio sul suo bordo. Philipe Starck, architetto e designer francese ha partecipato al progetto della Forge de Laguiole fin dall'inizio delle sue avvenure. Dopo aver ideato nel 1987 l'edificio della Forge de Laguiole ha ideato i primi negozi del marchio; così, sarà dunque anche il primo a ripensare il coltello di Laguiole. Caratteristiche:
Colore : nero Materiale : Acciaio inossidabile - Bachelite Dimensioni : Lunghezza totale: 30 cm - Lama: lunghezza 15 cm Origini: Coltello originale Laguiole interamente prodotto a Laguiole in Aveyron (più di 40 fasi successive sono necessarie alla sua realizzazione)5551S -
Fallkniven - F1 3G - coltello
Destinazione d'uso: tattico/militare/caccia
Lama: full tang in acciaio inox Laminato 3G a 62HRC
Manicatura: Thermorun E
Lunghezza lama: 105mm.
Spessore della lama: 4.5mm.
Lunghezza chiuso: - mm.
Lunghezza totale: 215mm.
Bilanciatura: arretrata a 2.5 cm dal ramo di guardia inferiore
Peso: 150g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: coltello ufficiale dei piloti dell'aeronautica svedese dal 1995F-F1L3G -
Fallkniven - F1 Leather - coltello
Destinazione d'uso: tattico/militare/caccia
Lama: full tang in acciaio inox San-Mai VG-10/420J2 59HRC
Manicatura: Thermorun E
Lunghezza lama: 105mm.
Spessore della lama: 4.5mm.
Lunghezza chiuso: - mm.
Lunghezza totale: 215mm.
Bilanciatura: arretrata a 2.5 cm dal ramo di guardia inferiore
Peso: 150g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: coltello ufficiale dei piloti dell'aeronautica svedese dal 1995F-F1L -
Fallkniven - HK9 Brown Micarta - knife
Intended use: Hunting / Sports
Type of production: Industrial
Production Blade: Japan
Blade: Stainless steel laminate 3G 62HRC
Treatment Lama: -
Handle material: Micarta Brown
Blade length: 90mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 195mm.
Thick when closed: -
Balance: -
Weight: 180g.
Closing: -
Clip: -
Sheath: Leather Brown
Packaging: Cardboard box with logos Fallkniven
Notes: -F-HK9 -
Fallkniven - KK CoS - Thermorun - knife
Intended Use: Sport / Hunting
Type of production: Industrial
Blade Production: Japan
Blade: Stainless san-ever 420JS and CoS to 60HRC
Treatment Lama: -
Handle: Thermorun
Blade length: 85mm.
Blade thickness: 3.85mm.
Length closed: -
Total length: 185mm.
Thick when closed: -
Balance: -
Weight: 84g.
Closing: -
Clip: -
Sheath: Zytel, neck / pocket
Packaging: Cardboard box with logos Fallkniven
Notes: -F-KKLZ -
Fallkniven - TK2 - Thermorun - knife
Fallkniven TK2 Tre Kronor
The "Tre Kronor" martensitic combines the latest technology with the ancient roots of the Swedish royal family.
These knives, in fact, are the only ones that can boast of a real symbol of the three crowns placed on the blade and on the beautiful wooden box containing the knife and sheath.
The steel laminate used is currently one of the best steel in industrial trade and is composed of a lamina in internal SGPS from dust, steel already used for the U2, to 62HRC coupled to two grips external VG2. The knives reveal so exceptional qualities of cut, penetration and sealing of the wire.Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Handle: Thermorun
Blade length: 100 mm.
Blade Thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black leatherF-TK2 -
Forge de Laguiole - Munoz Caballero Corno con blocco lama - coltello collezione
Coltello realizzato dal famoso Virgilio Munoz Caballero. Questo artigiano è stato insignito nel 1986 del titolo di Migliore Operario Francese nella categoria dei coltelli da collezione.
Dal 1984 collabora con Forge de Laguiole realizzando pezzi d'eccezione con uno stile personale che associa precisione e tecnica alla finezza delle decorazioni e incisioni.
Lama: in acciaio inox 12C27
Manicatura: corno
Lunghezza lama: 90 mm.
Spessore della lama: 3 mm.
Lunghezza totale: 220 mm.
Peso: 108 g.
Cartelle: Acciaio Inox lucido
Testine: Acciaio Inox lucido
Chiusura: Molla di ritenzione in acciaio Inox lucido
note: uno dei pochi Laguiole con il blocco lama2891 -
Forge de Laguiole - Radica di Ginepro - coltello collezione
Destinazione d'uso: Collezione
Lama: in acciaio inox 12C27
Produzione Lama Laguiole, Francia
Manicatura: Radica
Lunghezza lama: 85mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 110mm.
Lunghezza totale: 205mm.
Bilanciatura: -
Peso: 56g.
Chiusura: Molla di ritenzione
Clip: -
Fodero: -
Note: -2491 -
Forge de Laguiole - Yan Pennor collection - corian bianco - coltello
Creato dal disegnatore Yan Pennor questo coltello ha ottenuto il premio "French Grand Prize"
Lama: in acciaio inox 12C27
Manicatura: corian bianco
Lunghezza lama: 90 mm.
Spessore della lama: 3 mm.
Lunghezza totale: 205 mm.
Peso: 80 g.
Cartelle: Acciaio Inox lucido
Chiusura: Molla di ritenzione in acciaio Inox lucido
Clip: Assente
Fodero: Assente
scatola regalo2892 -
Forge de Laguiole - Yan Pennor collection - fibra di carbonio - coltello
Creato dal disegnatore Yan Pennor questo coltello ha ottenuto il premio "French Grand Prize"
Lama: in acciaio inox 12C27
Manicatura: fibre di carbonio
Lunghezza lama: 90 mm.
Spessore della lama: 3 mm.
Lunghezza totale: 205 mm.
Peso: 80 g.
Cartelle: Acciaio Inox lucido
Chiusura: Molla di ritenzione in acciaio Inox lucido
Clip: Assente
Fodero: Assente
scatola regaloserie numerata2894 -
Forge de Laguiole - Yan Pennor collection knife - corno - coltello collezione
Creato dal disegnatore Yan Pennor questo coltello ha ottenuto il premio "French Grand Prize"
Lama: in acciaio inox 12C27
Manicatura: corno
Lunghezza lama: 90 mm.
Spessore della lama: 3 mm.
Lunghezza totale: 205 mm.
Peso: 80 g.
Cartelle: Acciaio Inox lucido
Chiusura: Molla di ritenzione in acciaio Inox lucido
Clip: Assente
Fodero: Assente
scatola regaloserie numerata2893