Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Spyderco - Silverax - CPM-S30V & Carbon Fiber - PRIVATE COLLECTION - C228CFP - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: New
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / CollectionProduction Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S30V
Blade Finish: Satin finish
Handle: Carbon Fiber and G10 Laminate
Blade Length: 88mm.
Blade thickness: 3.5mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 94g.
Closure: Compression Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collectionC228CFP-CP -
Spyderco - Pattada - N690Co & G10 - PRIVATE COLLECTION - C204GP - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: In very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks above the opening hole, right side blade (see photo)
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / CollectionType of Production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Satin finish
Handle: Stainless steel and G10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 121mm.
Total length: 221mm.
Weight: 119g.
Closure: Liner Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collectionC204GP-CP -
Spyderco - Smock - New Pivot 2024 - S30V & Carbon Fiber/G10 - C240CFP - knife
Kevin Smock is an award-winning industrial designer who is making waves with his visionary handcrafted custom knives. Based on his SK23, the Spyderco Smock translates his innovative style into a high-quality production knife.
The Smock's most unique feature, however, is the push-button release of its high-strength Compression Lock mechanism, which allows the knife to close securely and easily without getting your fingers near the edge of the blade. Subtle, innovative and distinctly different, the Smock reflects Kevin Smock's unique approach to knife making.
Intended Use: Sporting/EDC
Type of production: Industrial
Country of manufacture: Taiwan
Blade: stainless steel CPM-S30V
Blade Finish: double satin finish, both horizontal and vertical
Handle: laminated carbon fiber and G10
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 11mm.
Weight: 104g.
Closure: Compression Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: front flipper opening system on ball bearings - new 2024 version with revised and increased pivotC240CFP -
Spyderco - Lil' Matriarch - Serrated Black FRN - PRIVATE COLLECTION - C162SBK - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, packaging slightly damaged
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: EDC / RescueProduction Type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 2mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 70g.
Closure: Back Lock
Clip: stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: -C126SBK-CP -
Spyderco - Endura 4 Stainless Steel Plain Edge - C10P - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
Type: Previously purchased
Condition: in like-new condition
Commercial availability: Available
Sharpening: Factory
Blade marks: -
Handle marks: -
Box: Present
Sheath: -
Manuals, Certificates, and Guarantees: Present
Checked and Certified by our in-house laboratory
Intended Use: SportingProduction Type: Industrial
Blade: VG-10 stainless steel
Blade Treatment: -
Blade Production: Japan
Handle: Stainless Steel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balance: -
Weight: 161g.
Locking Mechanism: Back Lock
Clip: Removable, multiposition, stainless steel
Sheath: -
Notes: -AP-C10P -
Spyderco - Endura 4 - Half Serrated Black Blade - PRIVATE COLLECTION - C10PSBBK - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition.
* Commercially available: Findable
* Sharpening: Factory.
* Marks on blade: Small abrasions on matte black finish.
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: SportingType of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: black titan carbonitriding
Country of manufacture: Japan
Handle: black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Weight: 106g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: previously purchased knife, from private collectionC10PSBBK-CP -
Spyderco - Native 5 - CPM-S90V & Fluted Carbon Fiber - C41CFFP5 - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S90V Powder Steel
Blade finish: Satin finish
Handle: Fluted Carbon Fiber
Blade Length: 75mm.
Blade thickness: 3.2mm.
Length closed: 102mm.
Total length: 177mm.
Weight: 79g.
Closure: Back Lock
Clip: stainless steel, removable and multi-position
Packaging: cardboard box with Spyderco logos
Notes: -C41CFFP5 -
Spyderco - Domino - CTS-XHP & Cubic Check Carbon Fiber - C172CFTIP - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Commercially available Discontinued, remained on the market from 2013 to 2017.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small abrasion marks on the clip.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / EDCProduction Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Satin finish
Handle: Titanium and Carbon Fiber laminated Cubic Check
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 116mm.
Total length: 195mm.
Weight: 119g.
Closure: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multiposition and removable, stainless steel
Notes: Previously purchased knife from a private collection - Design by Eric Glesser - Opening via patented Carson Flipper system - Pivot on ball bearingsSC172CFTIP-CP -
Spyderco - Lil Temperance 3 - K390 Lightweight Knife - C69PBL3K390 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: USA
Blade: K390 steel at 64/65HRC
Blade finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade Length: 74mm.
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 182mm.
Weight: 108g.
Closure: Compression Lock
Clip: removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steelC69PBL3K390 -
Spyderco - Salt I - H1FRN Yellow Knife - C88SYL - knife
A myth in the knife world is that out there somewhere there is a steel with high cutting capabilities that cannot rust.
A Japanese foundry recently turned this myth into reality with the introduction of a steel called H1. H1 is a PH steel, which is a precipitation-processed, hard-rolled alloy with no heat treatment and 0.1 percent nitrogen that acts like carbon in the steel matrix but does not react with chlorine to create rust.
Surprisingly, it maintains a sharp edge comparable to that of the higher quality knife steels used in the industry by most knife manufacturers.
Intended use: sub/sporting
Type of production: industrial
Country of manufacture: Japan
Blade: nitrogen steel H1
Blade finish: satin-finished
Handle: FRN
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 175mm.
Thickness when closed: 15mm.
Weight: 54g.
Closure: Back Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -SC88SYL -
Medford Knife and Tool - Swift FL Flipper - S35VN Tumbled DP Blade, Green Handle - MKFF206 - knife
Smooth Criminal... our first aluminum-framed, anodized, button-lock knife with a CPM-S35VN blade, at a price that changed our minds. All this while maintaining our high standards: 100% American made with all the Medford Knife & Tool attributes you expect!
Intended Use: Sporting
Type of production: Mid-Tech
Country of manufacture: USA
Blade: Stainless steel CPM-S35VN
Blade finish: Tumbled / Stonewashed
Handle: PVD aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thickness when closed: 14mm.
Weight: 106g.
Closure system: button lock
Clip: titanium, removable and reversible
Packaging: cardboard box with Medford logos, zipper pouch, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MKFF206STD -
Spyderco - Chaparral knife Gray FRN - PRIVATE COLLECTION - C152PGY - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Condition: Like New
Available in stores: YES
Sharpening: Original
Marks on blade: NO
Marks on handle: NO
Packaging: YES
Checked and Certified by our internal laboratory
Intended use: Sport / EDCType of production: Industrial
Country of production: Taiwan
Blade: In CTS-XHP stainless steel with full flat sharpening
Blade treatment: satin finish
Handle: FRN Fiberglass Reinforced Nylon bearing
Blade length: 71mm.
Blade thickness: 2mm.
Closed length: 91mm.
Total length: 163mm.
Closed thickness: 7.5mm.
Weight: 60g.
Closure: Back Lock
Clip: in stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Note: Design by Sal GlesserC152PGY -
Spyderco - Endura 4 Serrated Knife - K390 Blue FRN - C10FPK390 - knife
Intended Use: Sporting
Type of production: industrial
Blade: Bohler K390 carbon steel at 64/65HRC - SERRATED
Blade treatment: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 96mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 222mm.
Weight: 105g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: cardboard case with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steelC10FSK390 -
Spyderco - Manbug Wharncliffe Black TiCN - SCMBKWPBK - knife
Intended Use: Sporting/EDC
Production Type: Industrial
Blade production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Black TiCN - Titanium Carbonitride
Handle: FRN
Blade Length: 49mm.
Blade thickness: 2.5mm.
Length closed: 64mm.
Total lenght: 113mm.
Thickness when closed: 8mm.
Weight: 19g.
Closure: Back Lock
Clip: -
Package: cardboard case with Spyderco logos
Notes: -SMWBK -
Spyderco - Para 3 - CPM-S45VN and G10 Digital Camo - C223GPCMO - knife
Intended Use: Sporting / Tactical
Production Type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S45VN
Blade Treatment: Stonewashed
Handle: G-10
Blade Length: 75mm.
Blade thickness: 3.7mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 96g.
Closure: Compression Lock
Clip: Stainless steel
Package: cardboard box with Spyderco logos
Notes: new 2021 version with CPM-S45VN steel and Stonewashed finishC223GPCMO-S45 -
Spyderco - Endela - Plain Black - C243PBK - Knife
Intended use: Sporting
Type of production: industrial
Blade: Stainless steel VG-10
Blade finish: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 87mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 206mm.
Thickness when closed: 15.5mm.
Weight: 88g.
Closure: Back Lock
Clip: Removable, multi-position stainless steel clip
Notes: -C243PBK -
Spyderco - Police - Half Serrated - C07PS - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Satin finish
Handle: Satin-finished stainless steel
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Thickness when closed: 8mm
Weight: 162g.
Closure: Back Lock
Clip: multi-position, removable, stainless steel
Package: cardboard box with Spyderco logos
Notes: -C07PS -
Spyderco - Para 3 CPM-SPY27 Lightweight - C223PCBL - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Usa
Blade: Stainless steel CPM-SPY27
Blade treatment: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade Length: 75mm.
Blade thickness: 3.8mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 68g.
Closure: Compression Lock
Clip: removable and reversible, flush stainless steel clip
Package: cardboard box with Spyderco logos
Notes: Special edition stainless steel CPM-SPY27, developed by Spyderco together with Crucible and used exclusively on Spyderco products - Spyderco's main aim was to improve the VG-10 steel by increasing its composition and enriching it with nitrogen, niobium, vanadium and additional carbon by using a powder steel instead of a traditional martensitic one.C223PCBL -
Spyderco - Emphasis - C245GP - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Satin finish
Handle: Stainless steel and G-10
Blade length: 91mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 211mm.
Weight: 147g.
Closing system: Liner Lock
Clip: Removable and multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Note: -C245GP -
Spyderco - Insistent - C246GP - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Satin finish
Handle: Stainless steel and G-10
Blade length: 63mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 155mm.
Weight: 113g.
Closing system: Liner Lock
Clip: Removable and multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Note: -C246GP -
Spyderco - Dragonfly 2 Wave - Emerson Opener - C28GYW2 - knife
Intended use: sports
Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade treatment: Satin finish
Handle: FRN with stainless steel drowned folders
Blade length: 57mm.
Blade thickness: 2.5mm.
Closed length: 84mm.
Total length: 141mm.
Weight: 37g.
Opening: via Emerson Wave system or through the "SpyderHole" blade recess
Closure: Back Lock
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Spyderco logos
Note: -C28GYW2 -
Spyderco - Shaman - Black PVD Plain Edge - C229GBK - knife
Intended use: Sports
Type of production: Industrial
Country of production: Usa
Blade: Stainless steel CPM-S30V Powder Steel
Blade treatment: Black PVD
Handle: G10 with 3D machining and stainless steel liners
Blade length: 91mm.
Blade thickness: 3.8mm.
Length closed: 119mm.
Total length: 210mm.
Weight: 147g.
Closure: Compression Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: Model inspired by the Native, with a size of about 20%C229GBK -
Spyderco - Alcyone - C222GPGY - knife
Purpose of use: Sport
Type of production: Industrial
Country of production: China
Blade: stainless steel CTS-BD1
Blade Treatment: Satin
Handle: Stainless Steel and G-10
Blade Length: 74mm.
Blade thickness: 3mm.
Closed length: 105mm.
Overall length: 179mm.
Closed thickness: 16mm.
Weight: 93g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packing: cardboard box with Spyderco logos
Notes: -C222GPGY -
Spyderco - Delica - Wharncliffe Plain - C11FWCBK - knife
Intended use: Sports
Type of production: Industrial
Production Country: Japan
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Handle: FRN liners with embedded stainless steel
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Weight: 68g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Sharpening Flat GroundC11FWCBK -
Spyderco - Efficient - C216G - knife
Intended use: Sports
Type of production: Industrial
Production Country: China
Blade: 8Cr13MoV Stainless Steel
Blade treatment: Satin finish
Handle: Stainless steel and G-10
Blade length: 76mm.
Blade thickness: 3mm.
Closed Length: 104mm.
Overall length: 180mm.
Thick when closed: 16mm.
Balancing: -
Weight: 116g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -C216G -
Spyderco - Delica Flat Ground - Zome Green - C11ZFPGR - knife
Intended use: Sports
Type of production: Industrial
Production Country: Japan
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Handle: FRN liners with embedded stainless steel
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Weight: 66g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Sharpening Flat Ground12638 -
Spyderco - Endura Flat Ground - Zome Green - C10ZFPGR - Knife
Intended use: Sports
Type of production: Industrial
Blade: Stainless Steel VG-10
Blade treatment: satin
Production Country: Japan
Handle: FRN liners with embedded stainless steel
Blade length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Overall length: 220mm.
Thick when closed: 15.5mm.
Weight: 94g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Full-Flat GrindC10ZFPGR -
Spyderco - Ronin 2 by Michael Janich - FB09G2 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Country: Taiwan
Blade: Full Tang, Stainless Steel CTS-BD1
Blade treatment: Satin finish
Handle: G10
Blade length: 104mm.
Blade thickness: 3mm.
Overall length: 199mm.
Weight: 111g.
Sheath: Boltaron (plastic) with coupling of G-Clip type
Clip: multi, stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Michael Janich12536 -
Spyderco - Delica Flat Ground - Orange - C11FPOR - knife
Intended use: Sporting
Type of manufacture: Industrial
Blade: Stainless steel VG-10 58HRC
Blade treatment: -
Blade production: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Balance: -
Weight: 66g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: Full-Flat GrindC11FPOR -
Spyderco - Cat SC129GP - knife
Spyderco - Cat SC129GP - knife
Intended Use: Sport / EDC
Type of production: Industrial
Production Lama: Taiwan
Blade: stainless steel 440C
Treatment Lama: -
Handle: G10
Blade length: 60mm.
Blade thickness: 2.5mm.
Closed Length: 90mm.
Overall length: 150mm.
Thick when closed: 9mm.
Balancing: -
Weight: 72g.
Lock: Liner Lock
Clip: yes
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -SC129GP -
Spyderco - Dragonfly Stainless Steel - SC28P - knife
Intended Use: EDC / Sports
Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10
Blade treatment: -
Handle: Stainless steel
Blade length: 58mm.
Blade thickness: 2mm.
Closed Length: 80mm.
Overall length: 140mm.
Thick when closed: -
Balancing: -
Weight: 74g.
Closure: Back Lock
Clip: stainless steel, removable
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: -SC28P -
Spyderco - Manbug Lightweight - MBK - knife
Intended Use: Sport / EDC
Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: -
Handle: FRN
Blade length: 49mm.
Blade thickness: 2.5mm.
Closed Length: 64mm.
Overall length: 113mm.
Thickness when folded: 8mm.
Balancing: -
Weight: 19g.
Closure: Back Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -MBKP -
Spyderco - Resilience - C142GP - knife
Intended use: Sport
Type of production: Industrial
Production Lama: China
Blade: 8Cr13MoV stainless steel
Treatment Blade: -
Handle: Stainless steel and G-10
Blade length: 108mm.
Blade thickness: 3mm.
Closed Length: 133mm.
Overall length: 238mm.
Thick when closed: 16mm.
Balancing: -
Weight: 154g.
Lock: Liner Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -C142GP -
Spyderco - Cat - Satin 440C & Schwarz G10 - SC129GP - PRIVATSAMMLUNG - Messer
MESSER AUS PRIVATER SAMMLUNG ENTNOMMEN
* Typ: Zuvor gekauft
* Zustand: Gebraucht, in gutem Zustand
* Kommerziell verfügbar: Erhältlich, aber mit verschiedenen Stählen
* Schärfung: Werkseitig geschärft
* Marks on blade: Keine
* Marks on handle: Some small signs of wear on G10
* Box: Vorhanden, aber leicht beschädigt
* Scheide: /
* Handbücher, Zertifikate und Garantien: /
* Geprüft und zertifiziert durch unser hauseigenes Labor
Verwendungszweck: Sporting/EDCProduktionsart: Industriell
Land der Herstellung: Taiwan
Klinge: 440C rostfreier Stahl
Klingenfinish: Satinierte Oberfläche
Griff: G10
Klingenlänge: 60mm.
Dicke der Klinge: 2,5 mm.
Länge geschlossen: 90mm.
Gesamtlänge: 150mm.
Dicke im geschlossenen Zustand: 9mm.
Gewicht: 72g.
Verschluss: Liner Lock
Clip: Abnehmbar und umkehrbar aus Edelstahl
Verpackung: Pappschachtel mit Spyderco-LogosSC129GP-CP -
Medford Knife and Tools - NAV-H Fixed - Bead Blasted D2 & Green G10 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: overall in good condition
* Commercially available: discontinued
* Sharpening: professionally re-sharpened.
* Marks on blade: small abrasions given by insertion in Kydex sheath.
* Marks on handle: small abrasions in a couple of places.
* Box: Nylon pouch.
* Scabbard: made of Kydex
* Manuals, Certificates and Warranties: missing.
* Checked and Certified by our in-house laboratoryIntended Use: Tactical/Collection
Production type: MidTech
Country of manufacture: USA
Blade: full tang, D2 steel
Blade finish: microbead blasting
Handle: G10 green
Blade length: 95mm.
Blade thickness: 6.5mm.
Total length: 230mm.
Weight: 368g.
Sheath: kydex, thermoformed, with Tek Lok type attachment
Packaging: nylon pouch, with zipper closure and Medford logos
Notes: designed and built by Greg MedfordAP10517 -
Spyderco - Endura 4 Flat Ground - Gray - C10FPGY - knife
Intended use: Sporting
Type of manufacture: industrial
Blade: VG-10 stainless steel
Blade treatment: -
Blade production: Japan
Handle: Gray FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Balance: -
Weight: 94g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: Full-Flat GrindC10FPGY -
Spyderco - Ambitious - C148GP - knife
Intended use: Sporting/EDC
Production type: Industrial
Blade production: China
Blade: Stainless steel 8Cr13Mov
Blade treatment: -
Handle: G10
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 150mm.
Thickness when closed: 11mm.
Balance: -
Weight: 86g.
Closure: Liner Lock
Clip: Stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: -C148GP -
Spyderco - Delica 4 SpyderEdge - C11SBK - knife
Intended use: Sporting
Type of manufacture: industrial
Blade: Stainless steel VG-10 58HRC
Blade treatment: -
Blade production: Japan
Handle: Black FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Balance: -
Weight: 72g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: -C11SBK -
Spyderco - Endura 4 Black Blade - C10PSBBK - knife
Intended use: Sporting
Type of manufacture: industrial
Blade: Stainless steel VG-10 58HRC
Blade treatment: titan black carbonitriding
Blade production: Japan
Handle: Black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Balance: -
Weight: 106g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: -C10PSBBK -
Spyderco - Endura 4 Black FRN SpyderEdge - C10SBK - knife
Intended use: Sporting
Type of manufacture: industrial
Blade: VG-10 stainless steel
Blade treatment: -
Blade production: Japan
Handle: Black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: -C10SBK -
Spyderco - Endura 4 Wave knife - C10PGYW - knife
Spyderco - Endura 4 Wave - C10PGYW - knife
Intended use: Sport
Type of production: industrial
Blade: VG-10 stainless steel 58HRC
Treatment Lama: -
Blade Production: Japan
Handle: dark blue liners with FNR drowned in stainless steel
Blade length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Overall Length: 220mm.
Balance: -
Weight: 104g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: Wave hook for easy opening patented by Emerson Knives originally developed for the U.S. Navy SEALs special unitsC10PGYW -
Spyderco - Ladybug 3 - LBKS3 - knife
Intended use: Sporting/EDC
Production type: Industrial
Blade production: Japan
Blade: VG-10 stainless steel
Blade treatment: -
Handle: FRN
Blade length: 49mm.
Blade thickness: 2mm.
Length closed: 62mm.
Total length: 111mm.
Thickness when closed: 8mm.
Balance: -
Weight: 14g.
Closure: Back Lock
Clip: -
Sheath: -
Packaging: cardboard case with Spyderco logos
Notes: -LBKS3 -
Spyderco - Military Black Plain - C36GPBK - knife
Intended Use: Sporting/Tactical
Production type: Industrial
Blade production: U.S.A.
Blade: Stainless steel CPM 30SV
Blade Treatment: BodyCote black
Handle: G10
Blade length: 102mm.
Blade thickness: 3.3mm.
Length closed 140mm.
Total length: 241mm.
Thickness when closed: 15mm.
Balance: -
Weight: 122g.
Closure: Liner Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: cardboard box with Spyderco logos
Notes: -C36GPBK -
Spyderco - Military Plain knife - C36GPE knife
Intended use: Sport / Tactical
Type of production: Industrial
Blade Production: U.S.A.
Blade: CPM 30SV stainless steel
Blade treatment: -
Handle: G10
Blade length: 102mm.
Blade thickness: 3.3mm.
Closed length 140mm.
Total length: 241mm.
Closed thickness: 15mm.
Balancing: -
Weight: 122g.
Closure: Liner Lock
Clip: removable, in stainless steel
Scabbard: -
Packaging: cardboard box with Spyderco logos
Note: -3720PS -
Rockstead - HIGO II X-FCF - ZDP-189 & Dark Matter Gold Carbon Fiber - folding knife
Higo is one of the most beloved models for Rockstead Knives fans around the world, and HIGOⅡX, with a custom Dark Matter Gold (DMG) carbon fiber coating and a titanium back layer, is one more step in the pursuit of perfection. The blade is made of ZDP189 super stainless steel and features a unique convexity with gradually reduced angle (30 degrees at the middle and 24 degrees at the tip). The variable blade angle is the result of Rockstead's long quest for superior sharpness and cutting ability.
Blade: ZDP-189 stainless steel at 66.7HRC
Handle: anodized titanium and Dark Matter Gold carbon fiber
Blade length: 89mm.
Blade thickness: 3.2mm.
Total length: 216mm.
Weight: 138g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Accompanied by warranty certificate with full technical specificationsRO-HIGIIX-ZDPDMG -
Rockstead - Shin - Clad ZDP189 & Aluminum and Samekawa - folding knife
With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.
Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.
Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
Blade length: 95 mm.
Blade thickness: 4 mm.
Overall length: 210 mm.
Weight: 145 g.
Lock: Liner Lock steel in 52HRC 402J2
Clip: Steel 402J2 to 52HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.RO-SHIN-ZDP -
Rockstead - Hizen - DLC YXR7 & Duralumin - Folding Knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: in Hitachi YXR7 steel at 64HRC
Blade treatment: Black DLC mirror
Handle: A7075 Duralumin with Hv400 hardness anodizing
Blade length: 70mm.
Blade thickness: 3.3mm.
Length closed: 104mm.
Total length: 176mm.
Thick when closed: 11.4mm.
Weight: 74g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel of 1mm. with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: -RO-HIZ-DLC -
Rockstead - Hizen - ZDP-189 & Duralumin - Folding Knife made in Japan
Blade: stainless steel ZDP-189 to 67.2HRC
Handle: Duralumin A2024 with anodized surface to HV400
Blade length: 73 mm.
Blade Thickness: 3.5 mm.
Overall length: 176 mm.
Weight: 172 g.
Lock: Frame Lock with a swing in SKD11 61HRC
Clip: Steel 402J2 to 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.RO-HIZ-ZDP189 -
Rockstead - 2010 Higo-MH-DLC Serial #303 - YXR7 HPC & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory
The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.
Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HIMHDLC-CP -
Rockstead - 2010 Higo-ST Serial #005 - YR7 HPC & Duralumin - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.
The best industrial knives currently in production are marketed under the Rockstead brand. Created by Katsumi Kitano, who has been making quality knives for more than 20 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in the level of innovation for the materials used and construction techniques.
Country of production: Japan
Type of production: midtech
Blade: Hitachi YXR7 steel at 64.8HRC with 3micron HPC coverage and hardness of Hv1800
Handle: Duralumin A2024 with surface anodizing and hardness of Hv400
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 130g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Serial number 005 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HISTHPC-CP -
Spyderco - Street Beat by Fred Perrin - PRIVATE COLLECTION - FB15P - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Overall in good
* Commercially available: Discontinued in 2017.
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small signs of wear and tear.
* Marks on handle: None
* Box: Present and original
* Scabbard: Present and original, modified for belt carry.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Sporting / Neckwear
Production Type: Industrial
Country of Production: Japan
Blade: full tang, Stainless steel VG-10
Blade finish: satin finish
Handle: Micarta
Blade length: 85mm.
Blade thickness: 4mm.
Total length: 181mm.
Weight: 148g.
Sheath: Neck, boltaron, with possibility of Tek-Lok or MOLLE type attachments
Packaging: Cardboard box with Spyderco logos.
Notes: Design by Fred Perrin - Discontinued item, previously purchased, from private collection - Supplied with two removable attachments for belt carrySFB15P-CP -
Spyderco - Poliwog Knife C98F - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Condition: in good condition
Available in stores: NO
Sharpening: Resharpened by our internal laboratory
Marks on blade: NO
Marks on handle: YES, small scratches
Packaging: YES
Checked and Certified by our internal laboratory
A pollywog represents metamorphosis in the animal kingdom, adapting and changing its form to survive in its environment. The same principle applies here. The Spyderco Poliwog CLIPIT® thrives in a small-knife-friendly environment while keeping the features necessary to excel in a harsh, heavy cutting and performance setting. Its distinctive opened-ended Ball Bearing Lock™ exposes the knife's inner workings for easy cleaning and rates as one of Spyderco's highest strength locking mechanisms. Pulling back on the ball unlocks the blade ambidextrously from either side of the knife.The hand settles on the curved handle positioning the index finger into a choil that optimizes control and generates less fatigue and pressure on the hand during cutting. Made from VG-10, the blade has a hollow-ground edge with a weight reducing swedge-grind extending mid-spine to the tip. It is available in PlainEdge. Its ambidextrous wire-tension pocket clip sets the Poliwog tip-up in the pocket.
Intended use: Sporting / EDC
Type of production: Industrial
Blade Production: Japan
Blade: in VG10 stainless steel
Blade Treatment: -
Handle: in steel
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: 86mm.
Total length: 145mm.
Thickness when closed: -
Balance: -
Weight: 116g.
Closure: Ball Bearing Lock™
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: -AP-C98F -
Medford Knife and Tool - Praetorian Genesis T - S45VN Tumbled DP, Blue Warp Speed Handles - MK0294 - knife
Who could have imagined that the Praetorian would conquer the knife world and become a design icon? That was the predetermined size of the design, but someone still wasn't okay with it...so here is the Praetorian Genesis, designed for the for the middle-of-the-road fanatics The Praetorian Genesis is a little smaller than the original, but retains more of a tough-guy look than ever before not scaring off the fearful, but still big enough for any task!
Intended Use: Sporty / EDC
Type of production: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Dual Tone Tumbled & Satin
Handle: Blue Anodized Titanium with "Silver Peaks Warp Speed" artwork
Blade Length: 92mm.
Blade thickness: 5.5mm.
Length closed: 118mm.
Total length: 202mm.
Thickness when closed: 13mm.
Weight: 190g.
Closure system: Frame Lock
Clip: satin-finished titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK0294TD -
Medford Knife and Tool - Praetorian Genesis T - S45VN Tumbled Tanto, Violet & Brushed Silver Handles - MK0294 - knife
Who could have imagined that the Praetorian would conquer the knife world and become a design icon? That was the predetermined size of the design, but someone still wasn't okay with it... so here is the Praetorian Genesis, designed for the for the middle-of-the-road fanatics The Praetorian Genesis is a little smaller than the original, but retains more of a tough-guy look than ever before not scaring away the fearful, but still big enough for any task!
Intended Use: Sporty / EDC
Type of production: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Dual Tone Tumbled & Satin
Handle: Purple Anodized Titanium with "Brushed Silver Flat" artwork and flamed hardware
Blade Length: 92mm.
Blade thickness: 5.5mm.
Length closed: 118mm.
Total length: 202mm.
Thickness when closed: 13mm.
Weight: 190g.
Closure system: Frame Lock
Clip: flamed titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK0294TT -
Medford Knife and Tool - Micro Praetorian T - S45VN Vulcan DP, Bronze Stained Glass Handles - MK0084 - knife
The Medford Micro Praetorian T is the smallest of Medford's knife line, but no less capable. Although in Ancient Rome they were primarily charged with the defense of the Emperor, the Praetorian Guard was entrusted with a wide range of responsibilities, from fighting fires to protecting imperial interests. The Medford Micro Praetorian T, like its modern cousins and its ancient namesake, can be used for a myriad of tasks, from self-defense to everyday cutting tasks. With its titanium handle and wide, super-strong blade, the Micro Praetorian T is an EDC option that will last a lifetime without taking up too much pocket space.
Intended Use: Sporting / EDC
Production Type: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Vulcan DP PVD
Handle: Bronze Anodized Titanium with "Stained Glass" artwork and bronzed hardware
Blade length: 75mm.
Blade thickness: 5.5mm.
Length closed: 98mm.
Total length: 172mm.
Thickness when closed: 13mm.
Weight: 134g.
Locking system: frame lock
Clip: titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK0084VD -
Medford Knife and Tool - Micro Praetorian T - S45VN Tanto PVD, Bronze Stained Glass Handles - MK0084 - knife
The Medford Micro Praetorian T is the smallest of Medford's knife line, but no less capable. Although in Ancient Rome they were primarily charged with the defense of the Emperor, the Praetorian Guard was entrusted with a wide range of responsibilities, from fighting fires to protecting imperial interests. The Medford Micro Praetorian T, like its modern cousins and its ancient namesake, can be used for a myriad of tasks, from self-defense to everyday cutting tasks. With its titanium handle and wide, super-strong blade, the Micro Praetorian T is an EDC option that will last a lifetime without taking up too much pocket space.
Intended Use: Sporting / EDC
Production Type: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Black PVD
Handle: Bronze Anodized Titanium with "Stained Glass" artwork and PVD hardware
Blade length: 75mm.
Blade thickness: 5.5mm.
Length closed: 98mm.
Total length: 172mm.
Thickness when closed: 13mm.
Weight: 134g.
Locking system: frame lock
Clip: titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK0084PT -
Medford Knife and Tool - Praetorian Slim - S45VN Tanto Tumbled Blade, Blue Handles - MK208 - knife
With a blade just over 3mm thick and a titanium handle that is 11mm thick overall, this turns out to be one of our most pocket-friendly EDC knives, opening up a whole new market segment for us: the business class. These are customers who want to carry a Medford in their dress pants, lingerie, holster or purse, but when opened have the same familiarity as the sturdier Medfords. These are true EDC knives, highly portable and reliable!
Intended Use: Sporting / EDC
Type of production: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Tumbled & Satin
Handle: Anodized titanium with flamed hardware
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thickness when closed: 11mm.
Weight: 106g.
Locking system: frame lock
Clip: titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK208STT -
Medford Knife and Tool - Slim Midi - MagnaCut Tumbled DP Blade, Flamed Handles - MK201 - knife
With a blade just over 3mm thick and a titanium handle that is 11mm thick overall, this turns out to be one of our most pocket-friendly EDC knives, opening up a whole new market segment for us: the business class. These are customers who want to carry a Medford in their dress pants, lingerie, holster or purse, but when opened have the same familiarity as the sturdier Medfords. These are true EDC knives, highly portable and reliable!
Intended Use: Sporting / EDC
Type of production: Mid-Tech
Country of manufacture: USA
Blade: CPM-MagnaCut steel
Blade finish: Tumbled & Satin
Handle: handcrafted flamed titanium
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 201mm.
Thickness when closed: 11mm.
Weight: 115g.
Locking system: frame lock
Clip: titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK201MTD -
Medford Knife and Tool - Theseus - D2 Tumbled Blade, Violet Handles - MK040 - knife
The Theseus, named after the hero who defeated the Minotaur in ancient Greek mythology, is constructed in true Medford style. It features a tumbled D2 steel blade with stepped thumb groove and extended tang to facilitate quick one-handed use. A massive titanium handle with stainless steel spacer with lanyard hole and a unique pocket clip machined from billet complete the job.
Intended Use: Sporty
Type of production: Mid-Tech
Country of manufacture: USA
Blade: D2 steel
Blade finish: Tumbled & Satin
Handle: anodized titanium with flamed hardware
Blade length: 95mm.
Blade thickness: 5.5mm.
Length closed: 120mm.
Total length: 210mm.
Thickness when closed: 17mm.
Weight: 237g.
Closure system: Frame Lock
Clip: flamed titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK040DTQ -
Medford Knife and Tool - Smooth Criminal - S35VN Tumbled Blade, Red Handles - MK039 - knife
Smooth Criminal... our first aluminum-framed, anodized, button-lock knife with a CPM-S35VN blade, at a price that changed our minds. All this while maintaining our high standards: 100% American made with all the Medford Knife & Tool attributes you expect!
Intended Use: Sporting
Type of production: Mid-Tech
Country of manufacture: USA
Blade: Stainless steel CPM-S35VN
Blade finish: Tumbled / Stonewashed
Handle: PVD aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thickness when closed: 14mm.
Weight: 106g.
Closure system: button lock
Clip: titanium, removable and reversible
Packaging: cardboard box with Medford logos, zipper pouch, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK039STQ -
Medford Knife and Tool - Smooth Criminal - S35VN PVD Blade, Black Handles - MK039 - knife
Smooth Criminal... our first aluminum-framed, anodized, button-lock knife with CPM-S35VN blade, at a price that changed our minds. All this while maintaining our high standards: 100% American made with all the Medford Knife & Tool attributes you expect!
Intended Use: Sporting/Tactical
Production Type: Mid-Tech
Country of Production: USA
Blade: stainless steel CPM-S35VN
Blade finish: PVD
Handle: PVD aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thickness when closed: 14mm.
Weight: 106g.
Closure system: button lock
Clip: PVD titanium, removable and reversible
Packaging: cardboard box with Medford logos, zipper pouch, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK0394PQ -
Spyderco - Kevin Smock Knife C240CFP - S30V - Carbon Fiber/G10 - collection knife
Spyderco's Smock Knife is one of the most anticipated knives of recent times. Crafted in collaboration with renowned knifemaker Kevin Smock, the knife features a unique design that combines an elegant front opening and a push-button actuated Compression Lock locking mechanism.
Kevin Smock, a knife enthusiast since childhood, began customizing stock knives in 2012 and has subsequently developed his skills in craft knife making. His passion for knives is combined with his experience in product design, leading to the creation of innovative and unconventional knives.
Intended use: Sport/EDC
Type of production: Industrial
Blade production: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: -
Handle: Carbon Fiber
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 200mm.
Closed thickness: 11mm.
Balancing: -
Weight: 104g.
Closure: Compression Lock
Clips: Stainless steel
Scabbard: -
Packaging: Cardboard box with Spyderco logos
Note: -C240CFP-OLD -
Spyderco - Para 3 Black - Lightweight Knife - FRN Black - C223PBBK - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CTS BD-1
Blade treatment: Black DLC
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 68g.
Closure: Compression Lock
Clip: removable and reversible, flush, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: lighter and cheaper version of the Para 3 model with G10 handleC223PBBK -
Spyderco - Paramilitary 2 knife - Brown Canvas Micarta - CruWear steel - C81MPCW2 - knife
The Spyderco Paramilitary 2 is one of the most popular knives on the market, known for its high build quality, premium materials, attractive aesthetics, and ease of one-handed use. These characteristics have made it very popular among soldiers, builders, hunters, survivalists, and everyday knife carriers around the world. Every knife enthusiast should have a PM2 in their collection.
The Paramilitary 2 is available in numerous versions, with different colors and materials for the blade and handle. However, it should be noted that, due to the full liners, this knife is not compatible with most aftermarket components.
The Paramilitary 2 is the second version of the old Para Military, a model designed by Spyderco as a more compact and accessible version of their Military model. If you're looking for something even more compact, the Para 3 might be the right choice.
Intended use: Sporting / Collection
Type of production: Industrial
Blade production: USA
Blade: In CPM-CRUWEAR stainless steel
Blade treatment: Satin
Handle: Micarta
Blade length: 87mm.
Blade thickness: 3.5mm.
Closed length: 122mm.
Total length: 210mm.
Closed thickness: -
Balance: -
Weight: 110g.
Closure: Compression Lock
Clip: in stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -C81MPCW2 -
Rockstead - CHI ZDP - Shinogi Zukuri Clad Steel SanMai ZDP189 - knife made in Japan
Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.
Intended Use: Collection/Sportsman
Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpeningR-CHIZDP -
Spyderco - Endura 4 Flat Plain Knife - K390 Blue FRN - C10FPK390 - knife
Intended Use: Sporting
Type of production: industrial
Blade: Bohler K390 carbon steel at 64/65HRC
Blade treatment: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 96mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 222mm.
Weight: 105g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: cardboard case with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steelC10FPK390 -
Spyderco - Cricket Knife - C29BK - ATS-55 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available Discontinued since 2003
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, some signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: Yes
* Checked and certified by our internal laboratoryIntended use: Sporting
Type of production: industrial
Blade: ATS-55 stainless steel
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 50mm.
Blade thickness: 1.9mm.
Length closed: 70mm.
Total length: 118mm.
Weight: 36g.
Closure: Liner Lock
Clip: Removable, stainless steel
Notes: Version remained in production from approximately 1997 to 2003 - example withdrawn from a private collection, overall in very good condition.AP-C29BK -
Spyderco - Assist Knife - C79BK - PRIVATE COLLECTION - knife
KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Discontinued as of 2019
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, but without label and with signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: No
* Checked and certified by our internal laboratory
Intended use: SportingType of production: industrial
Blade: stainless steel VG-10
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 94mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 213mm.
Weight: 115g.
Closure: Back Lock
Clip: Removable, double positioning, stainless steel
Notes: Version remained in production approximately from 2004 to 2019 - specimen withdrawn from private collection, overall in good condition. Equipped with retractable glass breaker and whistle integrated in the handle.AP-C79BK -
Spyderco - Dragonfly - 2008 Integral FRN Clip - C28S - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory.
* Marks on blade: slight marks near the handle, due to blade opening.
* Marks on handle: No.
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory
Intended Use: Sporting
Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: FRN (fiberglass reinforced nylon)
Blade length: 57mm.
Blade thickness: 2.5mm.
Length closed: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: made of FRN, integrated into the handle
Notes: Third series made by Spyderco for the Dragonfly model, version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in very good conditionAP-C28S -
Spyderco - Delica 4 - G10 Foliage Green - C11GPFG - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight signs of wear, especially on clip
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory
Intended Use: Sporting
Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: G10 Foliage Green and Stainless Steel
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 90g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in good conditionAP-C11GPFG