bing
News
Best news of March
Shop By
Shopping Options
Brand
  1. Acta Non Verba 5items
  2. Aitor 4items
  3. Benchmade 22items
  4. BlackFox 17items
  5. Boker 82items
  6. Cold Steel 16items
  7. Coltelleria Collini 1item
  8. Consigli 1item
  9. CRKT 44items
  10. Extrema Ratio 105items
  11. Fallkniven 29items
  12. Fox Knives 155items
  13. Ka Bar 10items
  14. Leatherman 1item
  15. Lion Steel 19items
  16. Maserin 113items
  17. Mcusta 57items
  18. Saji Takeshi 2items
  19. Spyderco 131items
  20. Victorinox 11items
  21. Viper 75items
  22. Zero Tolerance 16items
  23. Approved 40items
  24. ADV Tactical 3items
  25. Al-Mar 4items
  26. Begg Knives 4items
  27. Beretta 2items
  28. Berkel 1item
  29. BlachHawk Blades 4items
  30. BladeTech 1item
  31. Buck 11items
  32. Carl Schlieper 3items
  33. Case 3items
  34. Citadel 6items
  35. David 4items
  36. Eickhorn 3items
  37. Emerson 11items
  38. Enzo 8items
  39. Fantoni 24items
  40. Gerber 11items
  41. Gilles 4items
  42. Guardian Tactical 2items
  43. Halcon Spain 1item
  44. Helle 2items
  45. Hikari Japan 6items
  46. Hoffner Knives 14items
  47. Ibberson 1item
  48. Jaguar Knives 7items
  49. Kershaw 18items
  50. Koji Hara 2items
  51. La Cantina 1item
  52. Linder 1item
  53. Lone Wolf 5items
  54. MedFordKnives 2items
  55. Mercury 1item
  56. Microtech 7items
  57. Mil Tac 3items
  58. MKM 33items
  59. No Brand 10items
  60. Ontario 2items
  61. Pohl Force 27items
  62. Rockstead 11items
  63. Sandrin Knives 3items
  64. Sergio Consoli 2items
  65. Spartan Blades 5items
  66. Stedemon Knife Co. 2items
  67. Strider 2items
Less
Stock
  1. In Stock 8items
  2. Out of Stock 33items
On Sale
  1. On Sale 1item
Set Ascending Direction

41 Items

  1. Giant Mouse - ACE Sonoma V2 - Elmax & Green Canvas Micarta - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION

    * Type: Previously purchased and used. 
    * Condition: Very good condition, with a few small marks on blade and handle.
    * Commercially available: Discontinued
    * Sharpening: Professionally re-sharpened.
    * Marks on blade: Small, unnoticeable scratches on the tip of the blade.
    * Marks on handle: A small mark near the clip housing.
    * Packaging: Yes
    * Scabbard: /
    * Manuals, Certificates and Warranties: /
    * Checked and Certified by our in-house laboratory


    Production Type: Industrial
    Country of Production: China (by Reate Knives)
    Blade: Elmax stainless steel
    Blade finish: satin finish
    Handle: green cavnas micarta with brass spacer
    Blade length: 87mm.
    Blade thickness: 3.5mm.
    Length closed: 114mm
    Total length: 203mm.
    Thickness when closed: 14mm.
    Weight: 85g.
    Closure: Liner Lock
    Clip: flush, stainless steel, removable and reversible
    Packaging: cardboard box with Giant Mouse logos
    Notes: discontinued knife, winner of the "2023 BEST EDC CHAMPION" award by Carryology

    GM-ACESO-CP
    €155.74
    Only 1 left
    Only 1 left
  2. Frank Centofante - SL-10 - ATS34 & Micarta #049 - PRIVATE COLLECTION - handmade knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased.
    * Condition: 12/1990 model, overall in good condition, with a few small marks from time
    * Commercially available: Limited edition, numbered model, made entirely by hand; craftsman passed away in 2009
    * Sharpening: Re-sharpened, a few small marks on blade due to sharpening
    * Marks on blade: A few small marks
    * Marks on handle: A few hairlines on the bolsters and a small dent on the left micarta handle.
    * Box: -
    * Scabbard: Suede leather case.
    * Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
    * Checked and Certified by our in-house laboratory

     

    Intended Use: Collection/Gentleman

    Type of production: Handcrafted
    Country of Production: USA
    Blade: stainless steel ATS34
    Blade finish: satin finish
    Handle: Stainless steel and Micarta
    Blade length: 83mm
    Blade thickness: 2.5mm.
    Length closed: 108mm.
    Total length: 189mm.
    Thickness when closed: 8mm.
    Weight: 99g.
    Closure: Back Lock
    Clip: -
    Sheath: Suede leather pouch
    Packaging: -
    Notes: rare handcrafted knife made in December 1990 by noted U.S. knife maker Frank Centofante who passed away in 2009, serial number #049

    FC-SL10-CP
    €1,221.31
    Only 1 left
    Only 1 left
  3. ExtremaRatio - MF1 BC knife - PRIVATE COLLECTION - tactical knife

    Type: Previously Purchased
    Condition: in excellent condition
    Available in the market, currently in production
    Sharpening: Factory standard
    Blade marks: None
    Handle marks: None
    Box: Present
    Sheath: Not applicable
    Manuals, Certificates, and Warranties: ER
    Checked and Certified by our internal laboratory
    Intended use: Tactical/Emergency

    Type of production: Industrial
    Blade Production: Italy
    Blade: N690Co stainless steel, 58HRC
    Blade Treatment: Testudo
    Handle: Anticorodal
    Blade length: 95mm
    Blade thickness: 4mm
    Closed length: 134mm
    Total length: 225mm
    Closed thickness: 24mm
    Balance: Not applicable
    Weight: 162g
    Closure: Liner Lock
    Clip: Stainless Steel
    Sheath: Not applicable
    Packaging: black cardboard box with Extrema Ratio logos
    Notes: seat belt cutter, glass breaker, screwdriver for optics

    AP-MF1-BC-CP
    Special Price €221.31 Regular Price €265.57
    Only 1 left
    Only 1 left
  4. Francesco Pachi - Custom Folder knife - BG42 & Micarta - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Condition: in like new condition
    * Sharpening: Factory
    * Marks on blade: None
    * Marks on handle: None
    * Scabbard: Present - Original
    * Manuals, Certificates and Warranties: lacking certificate and packaging.
    * Checked and Certified by our in-house laboratory

    Intended Use: Collection

    Type of production: Handcrafted unique piece by Francesco Pachì made at the direct request of a customer
    Country of production: Italy
    Blade: stainless steel BG-42 with gold plated opening pin set with hard stone
    Handle: gold-plated internal folders, satin-finished stainless steel heads, red micarta spacer, Loveless micarta handle and gold-plated hardware
    Blade length: 57mm.
    Blade thickness: 3mm.
    Total length: 136mm.
    Weight: 57g.
    Sheath: lizard skin knife pouch
    Locking system: Liner Lock
    Notes: knife withdrawn from private collection

    AP-LF-CP
    €811.48
    Only 1 left
    Only 1 left
  5. Zero Tolerance - Ken Onion Flipper Knife - ZT0200ST - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION

    Type: Previously Purchased
    Condition: in excellent condition
    Available in commerce: NO
    Sharpening: Original
    Marks on blade: YES - small marks
    Marks on handle: NO
    Packaging: YES, original box
    Checked and Certified by our internal laboratory
    Intended use: Tactical/Military

    Type of production: Industrial
    Country of production: USA
    Blade: In stainless steel 154CM
    Blade finish: Tungsten DLC Coating
    Handle: G10 with stainless steel liners
    Blade length: 101mm.
    Blade thickness: 4mm.
    Closed length: 132mm.
    Total length: 222mm.
    Thickness when closed: 21mm.
    Weight: 225g.
    Closure: Liner Lock
    Clip: Removable, reversible and multi-position, in stainless steel
    Packaging: -
    Notes: Design by Ken Onion - Opening system through Carson Flipper system - Knife out of production, withdrawn from private collection, like new, without box

    AP-ZT0200ST
    €237.70
    Only 1 left
    Only 1 left
  6. Master of Defense - Hornet Black Serrated - James Keating Design - PRIVATE COLLECTION - folding knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Overall in good condition.
    * Commercially available Discontinued
    * Sharpening: Factory
    * Marks on blade: No
    * Marks on handle: Slight: a few small scratches and abrasions on corners and clip; small oxidation marks on hardware
    * Box: Present and original (full set).
    * Scabbard: -
    * Manuals, Certificates and Warranties: Present (full set)
    * Checked and Certified by our in-house laboratory



    Tactical knife/EDC produced in the late 1990s and designed by martial arts expert James Keating,

    Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.

    Intended Use: Tactical/Collection
    Production Type: Industrial
    Country of manufacture: USA
    Blade: stainless steel 154CM 
    Handle: aircraft grade aluminum with non-slip Kraton inserts
    Blade length: 75mm.
    Blade thickness: 3.5mm.
    Length closed: 107mm.
    Total length: 183mm.
    Thickness when closed: 13mm
    Weight: 90g.
    Closure: Liner Lock
    Clip: removable, stainless steel
    Packaging: cardboard box with Master of Defense logos

    MOD-HORNET-CP
    €269.67
    Only 1 left
    Only 1 left
  7. Extremaratio - Fulcrum II T knife Folder Tanto - PRIVATE COLLECTION - knife

    KNIFE RETIRED FROM PRIVATE COLLECTION
    * Type: Previously purchased
    * Condition: In like new condition
    * Commercially available: No
    * Sharpening: Factory
    * Marks on blade: No
    * Marks on handle: No
    * Box: present
    * Manuals, Certificates and Guarantees: yes
    * Checked and Certified by our internal laboratory


    Intended use: tactical/military/backup

    Blade: N690Co 58HRC stainless steel
    Handle: Anticorodal thickness 4.5mm
    Blade length: 95mm.
    Blade thickness: 6mm.
    Closed length: 127
    Total length: 220mm.
    Balancing: -
    Weight: 200g.
    Closure: Back Lock
    Clip: removable and reversible in stainless steel
    Sheath: in cordura
    Notes: safety mechanism both on opening and closing

    Extrema Ratio foldables:
    Directly derived from military specifications, this openable was developed to replace a fixed blade in use.
    To achieve this result, very robust materials, high thicknesses and a solid and safe opening/closing system were used: the back lock.
    The knife is equipped with a manual safety which provides maximum safety in use and drastically reduces the risk of accidental closures.
    The safety, if inserted in the lock, prevents military or police operators from having the knife turned against them in the event of theft.
    Materials and processes:
    All the parts of the knife are machined from solid by high-precision numerical control machines while the assembly, adjustment and sharpening are carried out by hand.
    The blade is made of N690 cobalt stainless steel, a steel with very high characteristics of resistance to mechanical stress, cutting capacity, edge retention and corrosion resistance. The grinding is flat and the hardness is 58HRC.
    The grip scales are in Anticorodal, an aluminum alloy with high resistance to mechanical stress and oxidation.
    The tang, in hardened N690, is an effective emergency glass breaker. All screws, pins and clips are in burnished stainless steel. The blade, the lever and the tang are covered with Testudo treatment, very resistant to abrasion and oxidation. The grips are black anodized.

    AP-ER-F-2
    €323.77
    Only 1 left
    Only 1 left
  8. MC Thiers - AX1 Vintage Knife - Green Stamina Wood - PRIVATE COLLECTION - knife

    Knife from private collection - Vintage model (presumably early 90's) from Maison Coutellerie Thiers - In very good condition, never used for cutting, still shows some small signs of wear due to past time - Supplied with original leather sheath, with some small signs of wear - Checked and certified by our in-house laboratory.


    Intended Use: Collection/Sportsman

    Type of manufacture: Industrial
    Country of Production: France
    Blade: Stainless steel Z70CD15 (440A)
    Blade finish: satin-finished
    Handle: stainless steel and dark green stamina wood
    Blade length: 70mm.
    Blade thickness: 2.5mm.
    Total length: 175mm.
    Weight: 95g.
    Closure: Back Lock
    Clip: not present
    Sheath: leather, with belt loop
    Notes: knife from private collection in excellent condition

    MCT-AX1-GSW
    €154.92
    Only 1 left
    Only 1 left
  9. Lakota - 271 Lil' Hawk knife - Wooden handle - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Knife from 2002, previously purchased
    * Condition: Overall in good condition
    * Commercially available: Single specimen
    * Sharpening: Factory sharpened
    * Marks on blade: Inaccuracy in the satin finish on the left side
    * Marks on handle: a few marks due to the inside of the sheath button
    * Box: Present, original and in good condition
    * Scabbard: leather, perfect
    * Manuals, Certificates and Warranties: - -
    * Checked and certified by our in-house laboratory

    Intended use: collection / gentleman / sportsman

    Type of manufacture: Industrial
    Country of Manufacture: Japan
    Blade: Stainless steel AUS 8A
    Handle: Mahogany, resin impregnated
    Blade length: 92mm.
    Blade thickness: 3.5mm.
    Length closed: 121mm.
    Total length: 212mm.
    Thickness when closed: 15mm.
    Weight: 191g. (245g. scabbard included)
    Opening: Two-handed, with nail bezel
    Closure: Back Lock
    Clip: -
    Packaging: cardboard box, with photo and description
    Notes: leather sheath

    AP-LAKOTA
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  10. Gerber - Applegate Fairbairn Knife - PRIVATE COLLECTION - 5780 - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION

    Type: Previously Purchased
    Conditions: in excellent conditions
    Available in the market: NO
    Sharpening: Original
    Marks on blade: NO
    Marks on handle: NO
    Packaging: NO, without original box
    Checked and Certified by our internal laboratory
    Intended use: Tactical/Military

    Blade: in 154CM stainless steel
    Blade Production: USA
    Handle: Zytel
    Blade Length: 95mm.
    Blade Thickness: 3mm.
    Closed Length: 125mm.
    Total Length: 220mm.
    Balancing: -
    Weight: 113g.
    Closure: Liner Lock
    Clip: -
    Sheath: -
    Notes: without box

    AP-GE-APP
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  11. Al-Mar - Hawk - Iron Wood 1002 Full Set - PRIVATE COLLECTION - Vintage knife

    KNIFE TAKEN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Very good condition, close to new
    * Commercially available: Discontinued
    * Sharpening: Factory
    * Marks on blade: No
    * Marks on handle: Some small hairline on heads and metal insert
    * Box: Present - Original
    * Scabbard: Present - Original
    * Manuals, Certificates and Warranties: - - Original
    * Checked and certified by our in-house laboratory


    Intended Use: Gentleman / Collection

    Production type: Industrial
    Country of manufacture: Seki - Japan
    Blade: AM-6 stainless steel
    Blade treatment: satin finish
    Handle: iron wood, nickel silver insert, stainless steel heads and brass folders
    Blade length: 64mm.
    Blade thickness: 2mm.
    Length closed: 85mm.
    Total length: 147mm.
    Weight: 53g.
    Closure: Back Lock
    Sheath: Nylon, with belt loop and Velcro closure
    Packaging: Cardboard box with Al Mar logos
    Notes: Previously purchased - Near mint condition - Full Set

    AM-1002CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  12. Al-Mar - SERE Attack 3003/B - PRIVATE COLLECTION - vintage knife

    Rare knife produced by the Japanese Al-Mar in the late 80s and early 90s, now out of production and no longer available. Knife withdrawn from private collection and out of production - Knife slightly used, with small shallow marks on the left side of the blade, original leather sheath never used and never worn, including box (not original). The rubber grip has a slight break, with a small missing part, in the upper right rear part, near the corrugation. - Checked, re-sharpened and certified by our internal Collini Cutlery laboratory.

    Intended use: Collection / Tactical
    Type of production: Industriae
    Country of production: Japan, Seki
    Blade: AM-6 stainless steel
    Blade treatment: satin finish
    Handle: in rubber, with brass spacers
    Blade length: 110mm.
    Blade thickness: 4mm.
    Length closed: 150mm
    Total length: 255mm.
    Weight: 320g.
    Closing: Back Lock
    Sheath: leather, new
    Packaging: cardboard box, with Japanese logos, but not original Al-Mar
    Notes: withdrawn from private collection - used - re-sharpened - with "DEOPPRESSOLIBER" logo on the left head

    AM-3002DOL
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  13. Sergio Consoli - Folder Liner Lock - PRIVATE COLLECTION - holographic resin handle - N ° 480

    KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
    * Type: Previously purchased
    * Condition: in like new condition
    * Available on the market: no longer in production single piece produced in 2019
    * Sharpening: Original
    * Marks on the blade: no
    * Marks on the handle: no
    * Box: -
    * Sheath: no
    * Manuals, Certificates and Warranties: original
    * Checked and certified by our internal laboratory

    Intended use: Collection

    Type of production: Artisan by CIC Master Sergio Consoli
    Production Lama: Italy
    Blade: full-tang stainless steel RWL-34 60 / 61HRC
    Blade treatment: -
    Handle: holographic resin handle with titanium spacer
    Blade length: 85mm.
    Blade thickness: 4mm.
    Closed length: 120mm.
    Total length: 205mm.
    Thick when closed: 19mm.
    Balancing: -
    Weight: 132g.
    Closure: Liner Lock
    Clip: -
    Sheath: -
    Packaging:
    Notes: Handmade by Master Sergio Consoli - knife number 480 made in 2019

    CON-480
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  14. SOG - The Tomcat knife - Large - PRIVATE COLLECTION - knife

    The SOG Tomcat is one of SOG's largest folding knives. It features a 5mm thick blade, making it a heavy-duty folding knife, and while it weighs more than the average folding knife, it will withstand heavy use. The SOG Tomcat also won the "Overall Knife of the Year" award in 1988, one of the company's first awards, for its outstanding design.

    It is one of the most collected SOG folding knives

    KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
    * Type: Previously purchased
    * Conditions: Like new
    * Commercially available: Out of production, in production between 1986 and 2002
    * Sharpening: Factory
    * Marks on blade: No
    * Marks on the handle: No
    * Box: Yes, original, in perfect condition
    * Sheath: original in cordura
    * Manuals, Certificates and Warranties: present in the package
    * Checked and certified by our internal laboratory

    Intended use: Collection

    Type of production: Industrial
    Production Lama: Japan
    Blade: 440C stainless steel
    Blade treatment: -
    Handle: Stainless steel and Kraton
    Blade length: 90mm.
    Blade thickness: 4mm.
    Closed length: 116mm.
    Total length: 210mm.
    Thick when closed: -
    Balancing: -
    Weight: 216g.
    Closure: back-Lock
    Clip: -
    Sheath: Nylon
    Packaging: Cardboard box with SOG logos
    Note:

    AP-TOM-SOG
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  15. Cold Steel - Ti-Lite 6" - CTS-XHP Aluminum - 26ACSTX - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Like new
    * Commercially available: Discontinued, replaced by new variants in different steels
    * Sharpening: Factory sharpened
    * Marks on blade: No
    * Marks on handle: No
    * Box: Yes, original, in perfect condition
    * Scabbard: -
    * Manuals, Certificates and Warranties: - -
    * Checked and Certified by our in-house laboratory



    Intended Use: Tactical / Collection 

    Production Type: Industrial
    Country of Production: Taiwan
    Blade: Stainless steel CTS-XHP
    Blade treatment: Microbead blasted
    Handle: Duralumin A7075 
    Blade length: 152mm.
    Blade thickness: 4mm.
    Length closed: 178mm.
    Total length: 330mm.
    Thickness when closed: 22mm.
    Weight: 258g.
    Closure: LinerLock type
    Clip: removable, painted stainless steel
    Notes: discontinued knife, like new, withdrawn from private collection

    CS26ACSTX-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  16. Zero Tolerance - Scavenger Matte knife Black - PRIVATE COLLECTION - ZT0400 knife

    KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
    * Type: Previously purchased
    * Condition: in like new condition
    * Commercially available: no longer in production since 2014
    * Sharpening: factory sharpening
    * Marks on blade: no marks
    * Marks on the handle: no marks
    * Box: original ZT box
    * Manuals, Certificates and Guarantees: ZT certificates
    * Checked and certified by our internal laboratory Coltelleria Collini

    Intended use: Tactical / Military

    Type of production: Industrial
    Production Lama: USA
    Blade: CPM-S30V steel
    Blade treatment: Tungsten DLC Coating
    Handle: Black anodized aluminum with non-slip Trac-Tec inserts
    Blade length: 925mm.
    Blade thickness: 4mm.
    Closed length: 126mm.
    Total length: 215mm.
    Thick when closed: 17mm.
    Balancing: -
    Weight: 146g.
    Closure: Liner Lock
    Clip: Removable, Multiposition, in stainless steel
    Sheath: -
    Packaging:
    Notes: Design by Ken Onion - SpeedSafe opening system

    AP-ZT0400CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  17. Spyderco - Police knife Steel C07P - VG10 steel - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
    * Type: Rare model of the Police 2 - years 2002 - 2006
    * Condition: in like new condition
    * Commercially available: difficult to find
    * Sharpening: factory sharpening
    * Marks on blade: no marks
    * Marks on the handle: no marks
    * Box: original Sog box
    * Manuals, Certificates and Warranties: -
    * Checked and certified by our internal laboratory Coltelleria Collini


    Intended use: Sports / Collection

    Type of production: Industrial
    Production Lama: Japan
    Blade: In VG10 stainless steel
    Blade treatment: -
    Handle: steel
    Blade length: 100mm.
    Blade thickness: 3mm.
    Closed length: 135mm.
    Total length: 235mm.
    Thick when closed: 8mm
    Balancing: -
    Weight: 158g.
    Closure: Back Lock
    Clip: in stainless steel
    Sheath: -
    Packaging: without box
    Note:

    SP-POL-07P
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  18. Master of Defense - Point Man Plain Edge - Trident Utility knife - PRIVATE COLLECTION - knife

    Knife withdrawn from private collection - Rare model produced by Master of Defense around late 90s/early 00s and designed by James "Patches" Watson - Excellent condition. Never resharpened - No original box - Checked and certified by our workshop.

    Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.

    Intended Use: Tactical/Collection
    Production type: Industrial
    Country of manufacture: USA
    Blade: stainless steel 154CM black
    Handle: aircraft grade aluminum with non-slip Kraton inserts
    Blade length: 88mm.
    Blade thickness: 3.5mm.
    Length closed: 112mm
    Total length: 200mm.
    Thickness when closed: 13mm
    Weight: 116g.
    Closure: Liner Lock
    Clip: removable, stainless steel
    Notes: knife withdrawn from private collection in excellent condition

    MOD-PMPE-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  19. ExtremaRatio - BF1TD Black - PRIVATE COLLECTION - knife

    Knife withdrawn from private collection - "TD" version now discontinued and no longer available - Overall in good condition - Shows small marks on both blade and handle, but nothing that compromises its actual use - Original factory sharpening still in good condition, definitely can be improved - Accompanied by original Extrema Ratio box and certificates and warranties - Checked and certified by our in-house laboratory.

    Type of manufacture: industrial
    Blade: stainless steel N690Co 58HRC
    Country of manufacture: Italy
    Handle: Anticorodal
    Blade length: 70mm.
    Blade thickness: 3mm.
    Length closed: 99mm.
    Total length: 168mm.
    Weight: 82g.
    Closure: Liner Lock
    Clip: reversible and removable stainless steel
    Notes: knife withdrawn from private collection, overall in good condition

    ER-BF1TDBK-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  20. ExtremaRatio - MF0 Black Drop Rough - PRIVATE COLLECTION - folding knife

    Knife withdrawn from private collection. Overall in good condition shows small marks on clip, hardware and handle - Original factory sharpening in good condition - Complete with original Extrema Ratio cardboard box - Checked and certified by our in-house laboratory. 

    Intended Use: Tactical/Sportsman

    Production type: Industrial
    Country of Production: Italy
    Blade: Stainless steel N690Co 58HRC
    Blade Finish: Burnishing MIL-C-13924
    Handle: rough anticorodal (aluminum)
    Blade length: 68mm.
    Blade thickness: 4mm.
    Length closed: 110mm.
    Total length: 181mm.
    Thickness when closed: 15mm.
    Weight: 139g.
    Closure: Liner Lock, with additional safety catch
    Clip: Removable and reversible stainless steel
    Packaging: cardboard box with Extrema Ratio logos

    AP-MF0DR-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  21. Spyderco - Endura 4 Flat FRN Gray - PRIVATE COLLECTION - C10FPGY - Knife

    Knife withdrawn from private collection - Overall in very good condition, however, the previous owner removed the clip from the knife, a clip no longer present inside the package and therefore not provided - The knife still has the factory sharpening which should be slightly brightened, however - Supplied with original Spyderco cardboard box - Checked and certified by our in-house laboratory.

     


    Intended Use: Sporting

    Type of manufacture: industrial
    Blade: stainless steel VG-10
    Blade finish: satin
    Country of manufacture: Japan
    Handle: FRN with embedded stainless steel liners
    Blade length: 95mm.
    Blade thickness: 3mm.
    Length closed: 125mm.
    Total length: 220mm.
    Thickness when closed: 15.5mm.
    Weight: 94g.
    Locking system: Back Lock
    Clip: -
    Notes: knife withdrawn from private collection, clipless, overall in very good condition

    SC10FPGY-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  22. Spyderco - Native 5 Salt - FNR Yellow - C41PYL5 - PRIVATE COLLECTION - Knife

    Knife withdrawn from private collection. Overall in very good condition, including thread. Complete with original Spyderco cardboard box. Checked and certified by our in-house laboratory Coltelleria Collini.

    The very popular Native 5 Lightweight combined with the extraordinary corrosion resistance of the nitrogen-based LC200N steel.

    Intended use: Sporting / Collection

    Production Type: Industrial
    Blade Production: USA
    Blade: Nitrogen-based LC200N stainless steel
    Blade Treatment: -
    Handle: FRN Lightweight
    Blade length: 75mm.
    Blade thickness: 3mm.
    Length closed: 102mm.
    Total length: 175mm.
    Thickness when closed: 15.5mm.
    Balance: -
    Weight: 70g.
    Closure: Back Lock
    Clip: Stainless steel
    Packaging: Cardboard box with Spyderco logos
    Notes: -

    CP-C41PYL5
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  23. Spyderco - Native 5 Lightweight Black TiNi - C41PSBBK5 - PRIVATE COLLECTION - Knife

    Knife taken from a private collection. Overall in very good condition, including the edge: there are a few small marks on the right side of the blade (see photo). Complete with Spyderco cardboard box but belonging to another Native 5 model (C41SBK5). Checked and certified by our in-house laboratory Coltelleria Collini.

    Intended use: Sporting / Collection

    Production Type: Industrial
    Blade Production: USA
    Blade: CPM-S35VN Powder Steel
    Blade Treatment: TiNi
    Handle: FRN Lightweight
    Blade length: 75mm.
    Blade thickness: 3mm.
    Length closed: 102mm.
    Total length: 175mm.
    Thickness when closed: 15.5mm.
    Balance: -
    Weight: 70g.
    Closure: Back Lock
    Clip: Stainless steel
    Packaging: Cardboard box with Spyderco logos, however belonging to another Native 5 model (C41SBK5)
    Notes: -

    CP-C41PSBBK5
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  24. Viper - Drop Knife - Partridge Feather by Silvestrelli - 5700INPN - PRIVATE COLLECTION - knife

    Knife withdrawn from private collection - Overall in very good condition, no original box (will be delivered with an alternative Viper box, but it will not be its own) - Original sharpening, never used - First series, still in Sandvik steel (current production is in 1.4416 steel) - Checked and certified by our in-house laboratory.


    Intended use: Collection/Sportsman/Gentleman

    Type of production: industrial
    Country of production: Italy
    Blade: Sandvik 12C27 stainless steel
    Blade treatment: satin finish
    Handle: made of Resin, with real Partridge feathers inside and stainless steel liners
    Blade length: 49mm.
    Blade thickness: 3mm.
    Length when closed: 75mm.
    Thickness when closed: 12mm.
    Total length: 125mm.
    Weight: 68g.
    Closure: Liner Lock
    Clip: absent
    Scabbard: absent
    Notes: Drowned in resin, two elegant Partridge feathers find their place - design by Fabrizio "Sylvester" Silvestrelli - Knife withdrawn from private collection

    V5700INPN
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  25. Buck - Model 500 - 1987 Canadian Loon - Limited Edition - PRIVATE COLLECTION - knife

    Withdrawn from a private collection, this American Buck Model 500 made in 1987 turns out to be exclusive because of the gold leaf engraving on the blade commemorating the Loon, the iconic swimming bird of Ontario, Canada, and the limited edition of only 250 pieces - Like-new condition, never used, with original Buck warranties and manuals and accompanying 1987 Canadian $1 coin, also dedicated to the Loon - Checked and certified by our in-house Coltelleria Collini laboratory.

     


    Intended Use: Collection

    Type of production: Industrial
    Blade Production: USA
    Blade: Engraved 420HC stainless steel
    Blade Finish: Polishing
    Handle: Walnut wood and Alpacca (Nickel and Silver alloy)
    Blade Length: 78mm.
    Blade thickness: 2.5mm.
    Length closed: 111mm.
    Total length: 187mm.
    Thickness when closed: 18mm.
    Weight: 135g.
    Closure: Back Lock
    Package: wooden box, original care and maintenance manuals and warranty certificate of the time
    Notes: Limited edition made in only 250 numbered examples on the blade (example 169 of 250) - 1987 specimen withdrawn from private collection, in like-new condition.

    BU-500CL
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  26. Cold Steel - Gunsite II - VG-1 Half Serrated - Made in Japan - PRIVATE COLLECTION - 29GLTH - knife

    Knife from private collection - Like new, never used, with original box in excellent condition - Mid 90's production still made in Japan, with VG-1 steel - All in mint condition. Checked and certified by our in-house laboratory.


    Intended Use: Collector/Sportsman

    Type of production: Industrial
    Country of Production: Japan
    Blade: Stainless steel VG-1
    Blade Finish: Satin
    Handle: Zytel
    Blade length: 104mm.
    Blade thickness: 3mm.
    Total length: 233mm.
    Weight: 105g.
    Closure: Back-Lock
    Clip: Removable, painted stainless steel
    Packaging: cardboard box with Cold Steel logos
    Notes: Like-new knife from a private collection, dating from the mid-1990s; made in Japan from VG-1 steel

    C29GLTH
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  27. Spyderco - Co-Pilot C09S knife - GIN-1 steel - PRIVATE COLLECTION - knife

    Knife withdrawn from private collection - Rare model and out of production for many years, dating back to 1995 with blade made of Japanese GIN-1 steel - Overall in excellent condition. Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.

    Intended use: Sports / Collection

    Type of production: Industrial
    Production Lama: Japan
    Blade: Gin-1 stainless steel
    Blade treatment: -
    Handle: steel
    Blade length: 50mm.
    Blade thickness: 2.5mm.
    Closed length: 77mm.
    Total length: 126mm.
    Thick when closed: 6mm
    Balancing: -
    Weight: 71g.
    Closure: Back Lock
    Clip: in stainless steel
    Sheath: -
    Packaging: cardboard box
    Note:

    SP-C09S-AP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  28. Klotzli - Sailor C Knife Walker design - Titanium - ATS-34 - collection knife

    Knife withdrawn from a private collection, in like new condition with original box and certificate - Model dating back to the late 90s "made by Klotzli from the famous American designer Michael Walker. Knife that combines two qualities that are difficult to match, especially in those years; lightness and strength. Elegant gentleness, easy to open and close with one hand thanks to the Liner-Lock system invented by Walker himself

    Checked and certified by our internal laboratory Coltelleria Collini.

    Intended use: sports / collection

    Type of production: industrial
    Country of production: Switzerland
    Blade: ATS-34 stainless steel
    Blade finish: Satin finish
    Handle: Titanium
    Blade length: 70mm.
    Blade thickness: 3mm.
    Closed length: 96mm.
    Total length: 170mm.
    Weight: 74g.
    Closure: LinerLock
    Clip: in stainless steel, removable
    Notes: Design by Michael Walker

    AP-KLO-S-W
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  29. Spyderco - Viele - C42S - 1997 Made in Japan from PRIVATE COLLECTION - knife

    Knife taken from private collection - Rare Spyderco model produced in December 1997 - Absolutely like new, with original box, never taken out of the box and never used - Checked and certified by our internal laboratory.


    Intended Use: Collection/Sporting

    Production Type: Industrial
    Country of Production: Japan
    Blade: AUS-8 Stainless Steel
    Handle: Micarta and Steel
    Blade Length: 82mm.
    Blade Thickness: 3mm.
    Length closed: 114mm.
    Total length: 196m.
    Weight: 98g.
    Closure: Liner Lock
    Clip: Stainless steel
    Package: original box with Spydero logos
    Notes: knife made in 12/97, new, never used, with original box.

    SP-C42S-97
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  30. Strider Knives - AR Tiger Stripe - Flat G10 Scales S30V by Paul Bos - PRIVATE COLLECTION - knife

    Knife acquired from a private collection - Overall in very good condition, with factory sharpening - Rare version, one of the first, with flat G10 handle - Hardened by Paul Bos, with logo present on the right heel of the blade - It has some small signs of abrasion on the tigerstripe finish, common to all Strider knives - Checked and certified by our internal laboratory.

     


    Intended Use: Tactical

    Manufacturing Type: Mid Tech (semi-craft)
    Country of Production: USA
    Blade: Stainless steel CPM-S30V hardened by Paul Bos
    Blade Treatment: Tiger Stripe
    Handle: G10 flat with 2mm titanium liners
    Blade length: 103mm.
    Blade thickness: 5mm.
    Length closed: 137mm.
    Total length: 240mm.
    Thickness closed: 18mm.
    Weight: 228g.
    Closure: Liner Lock
    Clip: Titanium 
    Package: Nylon pouch with zipper 
    Notes: Rare version, one of the first, with G10 flat grip - Hardened by Paul Bos, with logo on the right heel of the blade

    ST-AR-CPR
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  31. Master of Defense - Tempest knife SW by Michael Janich Design - PRIVATE COLLECTION - folding knife

    Knife withdrawn from a private collection - Rare model produced by the Master of Defense around 2001 - Excellent condition. Never resharpened - Without original box - Checked and certified by our internal laboratory Coltelleria Collini.

    Tactical / EDC knife manufactured in the late 1990s and designed by martial arts expert Michael Janich,

    Master of Defense, an eclectic American brand no longer in business and later taken over by Blackhawk! Blades, produced various tactical and military type folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.

    The only copy at our disposal, without box, very rare and out of production for many years.


    Intended use: Tactical / Collection
    Type of production: Industrial
    Production Lama: USA
    Blade: 154CM stainless steel
    Handle: Aviation aluminum with Kraton anti-slip inserts
    Blade length: 86mm.
    Blade thickness: 3.5mm.
    Closed length: 112mm
    Total length: 200mm.
    Thick when closed: 13mm
    Weight: 120g.
    Closure: Liner Lock
    Clip: removable, in stainless steel
    Packaging:

    MOD-TEMSW-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  32. Allen Elishewitz - Gordian Knot Custom Flipper - Bronze and Carbon Fiber - PRIVATE COLLECTION - handmade knife

    Knife collected from private collection - 2014 model entirely handmade by Allen Elishewitz - Like new, original sharpening - Supplied with nylon pouch with velcro - Checked and certified by our internal laboratory Coltelleria Collini.


    Intended use: Collection 

    Kind of production: Handmade
    Country of production: USA
    Blade: handcrafted and beveled, in CTS-C75P stainless steel (Latrobe BG-42)
    Blade treatment: handmade satin finish with Allen Elishewitz golden punch
    Handle: titanium liners "crushed ice" with carbon fiber and copper grips with handmade bronze bolsters
    Blade length: 100mm.
    Blade thickness: 4mm.
    Length closed: 128mm.
    Total lenght: 223mm.
    Thickness when closed: 16mm.
    Weight: 199g.
    Closure: Liner Lock
    Clip: Removable, inegral carbon fiber
    Notes: Entirely handcrafted by Allen Elishewitz - 2014 model, like new - from private collector - Supplied with nylon velcro pouch.

    AE-GKCF
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  33. Gerber - Spectre knife - 154cm - 06900 - PRIVATE COLLECTION - knife

    Rare model produced by Gerber until 2003 - Knife taken from private collection - Overall in excellent condition, complete with original box and certificates - Checked, certified by our internal laboratory Coltelleria Collini.

    Intended use: Tactical/Military

    Blade: Stainless steel 154CM
    Blade production USA
    Handle: G10 with titanium folders
    Blade length: 85mm.
    Blade thickness: 3.5mm.
    Length closed: 107mm.
    Total length: 200mm.
    Balance: -
    Weight: 105g.
    Closure: Liner Lock
    Clip: Steel
    Scabbard: -
    Notes: -

    AP-06900
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  34. Rockstead - Shin knife - ZDP189 in SanMai - PRIVATE COLLECTION - knife

    Retired from rivata collection - Rare Rockstead model produced in 2009 in SANMAI ZDP189 and ATS34 steel - the temper of this piece has reached a rare hardness of 67.4 hrc - Knife in like new condition.

    Checked and certified by our internal laboratory - Collini Cutlery.

    The best industrial knives currently in production are currently marketed under the Rockstead brand, of Ishida Co. of Sakai, Japan.

    Created by Katsumi Kitano, who has been producing quality knives for over 20 years so as to have been awarded the highest recognition among artisan cutlers in Japan, they prove to be exceptional both in cutting capacity, penetration and edge retention and in terms of innovation for materials used and for the construction techniques.

    Blade: SanMai ZDP189 and ATS-34 stainless steel at 67.4 HRC
    Handle: Same (real stingray leather) and aircraft aluminum with black alumite treatment at Hv400
    Blade length: 95 mm.
    Blade thickness: 4 mm.
    Total length: 210 mm.
    Weight: 145 g.
    Closure: Liner Lock in 402J2 steel at 52HRC
    Clip: 402J2 to 52HRC steel
    Notes: Accompanied by a guarantee certificate with technical specifications.

    RO-S-ZDP-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  35. Max Salice Sanna - Daghetta in Damasteel damask and carbon fiber - PRIVATE COLLECTION - custom

    Collector's knife from a private collection - Daghetta model made by the famous Italian knifemaker Max around the early 2000s - Like new condition - Checked and certified by our internal Collini Cutlery laboratory.

    Intended use: Collection / Gentleman

    Type of production: Artisan
    Lama production: Italy
    Blade: Damasteel 61/62 Hrc damascus steel
    Blade treatment: -
    Handle: damasteel damask bolster, carbon fiber with titanium liners
    Blade length: 80mm.
    Blade thickness: 3mm.
    Length closed: 112mm.
    Total length: 195mm.
    Thick when closed: 13mm.
    Balancing: -
    Weight: 129g.
    Closing: Liner Lock
    Clip: in damasteel damask
    Sheath: -
    Notes: ONE PIECE - custom knife handcrafted by Max

    Massimiliano Salice Sanna, called Max is a master knife maker "of the first hour", active for a quarter of a century. Specialized in the construction of folding knives, he is constantly looking for new materials and innovative techniques. Max is a master of the Italian guild of knife makers, born in 1958, a Roman by birth and a Tuscan by adoption.

    MAX-DAG-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  36. Sergio Consoli - Custom Liner Lock folder - N ° 271 - PRIVATE COLLECTION - handmade knife

    Intended use: Collection

    Type of production: Artisan by Maestro CIC Sergio Consoli
    Lama production: Italy
    Blade: full-tang in RWL-34 60 / 61HRC stainless steel
    Blade treatment: -
    Handle: carbon fiber
    Blade length: 85mm.
    Blade thickness: 4mm.
    Length closed: 120mm.
    Total length: 205mm.
    Thick when closed: 19mm.
    Balancing: -
    Weight: 138g.
    Closing: Liner Lock
    Clip: carbon fiber
    Sheath: -
    Packaging:
    Notes: Handmade by Maestro Sergio Consoli - knife number 271 made in 2009

     

    Acknowledgments

    I currently make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:

    in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded the "best table on display"

    always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"

    moreover, I ranked second in the competition organized by LAME D'AUTORE magazine as the best fixed hunting blade

    then in 2007 at "Scarperia" I won the third prize as the best closable

    but above all again in 2007, I achieved, to my great satisfaction, the level of MASTER OF ITALIAN COLTELLINAI CORPORATION, recognition received at the first exam taken.

    Presentation of the craftsman

    Creating a hand knife is what I consider a real art form.
    The satisfaction of seeing an object that comes from your own hands, that takes shape and that reaches mechanical, artistic and aesthetic perfection is what pays me more for all the hours of work and effort it takes to create a knife completely by hand.


    The passion for "cutting irons" has always been in me since I was a child and has grown with me until the almost sudden decision to build my first knife on my own, it was a "need", almost an inner need that I couldn't put it off, my hands and my mind had to start creating, of course what I had always been passionate about ... the knife!


    I started at 40, in 2003, practically self-taught, I had no manual work experience, but I had been a mechanical designer for many years and this allowed me to know perfectly the technique and all the various stages of mechanical processing.


    Currently I am a member, with the rank of Maestro, which is the highest, of the Italian Knifemakers Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.


    What I do now is what I consider my art form ..., to create "handmade, hunting and collectible knives".


    They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
    I make above all folding knives, which satisfy more my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they cannot be seen, is what distinguishes a hand-made knife from an industrially made one .


    The mechanics must then be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.


    Of course, over the years I have refined my technique and currently I have improved even more the mechanics by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction and with an incredible sweetness.


    With regard to the blades, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow exceptional wire holding and cutting quality for all types of use.


    Pathically I make all the knives on my initial design, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "handmade".


    Regarding the materials that I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damask, both stainless steel and carbon, for the uniqueness 'that they donate to the knife, since each damask is always different from another.


    For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of colors, all beautiful, I also use the fossil ivory of mammoth, various briars, titanium and carbon fiber.


    Most of the knives, however, are made entirely of steel, in order to then be engraved, always and rigorously by hand, to transform the knife even more into a real work of art ...

    CON-271
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  37. Frank Centofante - Mother of Pearl Lockback Gentleman knife - PRIVATE COLLECTION - handmade knife

    Knife withdrawn from a private collection - Beautiful and rare knife made in the late 90s by the famous American Knifemaker Frank Centofante, who passed away in 2009 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

    Intended use: Collection / Gentleman

    Type of production: Artisan
    Blade production: USA
    Blade: ATS34 stainless steel
    Blade treatment: -
    Handle: steel and mother of pearl
    Blade length: 75mm
    Blade thickness: 2.5mm.
    Length closed: 103mm.
    Total length: 180mm.
    Thick when closed: 10mm.
    Balancing: -
    Weight: 86g.
    Closing: Back Lock
    Clip: -
    Sheath: -
    Packaging: -
    Notes: rare artisan knife made by the well-known American cutler Frank Centofante who recently passed away, serial number 008

    CE-008
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  38. Spyderco - Sage 1 - Carbon Fiber - C123CFP knife

    Knife withdrawn from a private collection - Like new condition: never used, never re-sharpened, never carried in pocket, perfect in every detail. Without original box. - Checked and certified by our Collini Cutlery internal laboratory.

     

    Intended use: Sports

    Type of production: Industrial
    Country of production: Taiwan
    Blade: CPM-S30V stainless steel
    Blade treatment: satin finish
    Handle: carbon fiber
    Blade length: 77mm.
    Blade thickness: 2.7mm.
    Length closed 114mm.
    Total length: 181mm.
    Thick when closed: 17mm.
    Weight: 92g.
    Closing: Liner Lock
    Clip: removable, multi-position, in stainless steel
    Packaging: absent
    Notes: knife from private collection, like new, without box

    SC123CF-A
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  39. Kevin Wilkins - 2005 New Brittania Linerlock - Jade G11 - Custom knife

    Custom by Kevin Wilkins from 2005 from a private collection provided with original certificates signed by the craftsman.

    Slight regrinding, perfectly centered blade with good retention from closed, fluid opening movement and blade without any horizontal or vertical clearance once opened. The frame lock engages in the first quarter of the race without any uncertainty and without sticking.

    Globally in good condition, it shows some small marks on the G11 handles and on the back and belly of the liners. A small abrasion on the blade, on the right side near the tip of the knife.

    Intended use: collection

    Type of production: artisanal
    Country of production: Germany
    Blade: CPM-S90V stainless steel
    Finish: Satin
    Handle: jade Titanium and G11
    Blade length: 75mm.
    Blade thickness: 3.8mm.
    Length closed: 110mm.
    Total length: 188mm.
    Thick when closed: 15.8mm
    Weight: 158g.
    Closure: Liner Lock
    Clip: -
    Sheath: -
    Notes: with original warranty certificates - produced in March 2005 - from a private collection

    KW-BRITTANIA
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  40. Brian Tighe - Tac Tanto knife - craft knife

    Intended use: collection

    Type of production: custom
    Blade production: U.S.A.
    Blade: BG-42 stainless steel
    Blade treatment: Satin finish
    Handle: titanium and carbon fiber
    Blade length: 83mm.
    Blade thickness: 3mm.
    Length closed: 112mm.
    Total length: 195mm.
    Thick when closed: 13mm
    Balancing: -
    Weight: 94g.
    Closure: Liner Lock
    Clip: in titanium
    Sheath: -
    Notes: production early 2000s, withdrawn from a private collection



    BT-CUSTOM
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  41. Mercury - Logan Orange by Moreno Franzin - knife

    Logan is not a common liner, but hides an epic revolution in the constructive concept!

    Unlike traditional liners, Logan has no moving pins, but is born from a 5th titanium monolith. The accurate CNC milling machines produce Logan's body: solid, lightweight, slim and highly functional where the blade rotates on the pin, one With the base, to ensure a high strength and sturdiness. The retractable screws in the body give Logan the ultimate touch of clean elegance.

    Purpose: Sportsman / EDC

    Type of production: Industrial
    Country of production: Maniago - Italy
    Blade: D2 Steel at 61HRC hardened vacuum
    Blade treatment: beaded blast
    Handle: Titanium monolithic 6AL4V and G10
    Blade Length: 95mm.
    Blade thickness: 3mm.
    Closed length: 113mm.
    Total length: 205mm.
    Closed thickness: 9mm.
    Weight: 96g.
    Opening: In one hand, with removable T-pin, on the back of the blade
    Washers: Teflon
    Closure: Liner Lock
    Clip: Stainless steel, removable and reversible
    Sheath: Upholstered zip pocket
    Packing: Cardboard box with Mercury logos
    Notes: Design by Moreno Franzin

    ME-LOGOR
    €188.52
    Out of stock
Set Ascending Direction

41 Items





ecommerce sicuro