Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Andre De Villiers ADV - 2018 Ronin - S35VN & Integral Blackwashed Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like New
* Commercially available 2018 Exemplar; currently offering other variants in other configurations.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended use: collectible/sporting/military
Production type: Midtech
Country of manufacture: South Africa
Blade: stainless steel CPM-S35VN
Blade treatment: blackwash
Handle: integral, machined titanium from solid, blackwash finish
Blade length: 103mm.
Blade thickness: 4.5mm.
Length closed: 132mm.
Total length: 234mm.
Thickness when closed: 16mm.
Weight: 191g.
Opening: Carson Flipper type, on ball bearings
Closure: FrameLock
Clip: titanium, machined from billet
Packaging: plastic case with ADV Tactical logos
Notes: entirely designed and built by Andre De Villiers in his own workshopADV-RBTI-CP -
Andre De Villiers ADV - Harpoon F17 Black knife - knife
Purpose: collection / sport / military
Type of production: artisanal seed
Country of Origin: South Africa
Blade: N690Co stainless steel
Blade treatment: black
Handle: black titanium
Blade Length: 95mm.
Blade thickness: 4.5mm.
Closed length: 130mm.
Overall length: 226mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 210g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-HA-B -
Conaz Consigli Scarperia - Zuava ox horn 50075 - 16cm - knife
This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.
Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs
Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm50075 -
Conaz Consigli Scarperia - Fiorentino Bovino knife cm 24 - 50018 - knife
Scimitar "or" French "blade already present in the early twentieth century, production continued until the mid-1950s. The great success of this model, which was born in Scarperia has had national diffusion, is due to the fact that although it is very light it is elegant, robust and has great cutting capacity, due to the guessed shape of the blade. It is characterized by the presence of a metal "button" on the heel and a clamp at the other end of the handle.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 148g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.R-FIC24 -
Conaz Consigli Scarperia - Pattada Brotzu raw mutton 22cm PBM22G - knife
Pattada Brotzu raw mutton 22cm PBM22G - knife
Typical folding knife craftsmanship Sardinian manufactured by Conaz ScarperiaBlade: stainless steel 420
Handle: raw mutton
Blade length: 90mm.
Overall length: 215mm.
Weight: 64g.WARNING: these are natural material, the color of the horn may be different from the one in the picture.
PBM22G -
Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 24cm - 53164 - knife
Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 83g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
PBM24G -
Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 27cm - 53165 - knife
Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 110mm.
Blade thickness: 3mm.
Length closed: 145mm.
Total length: 265mm.
Weight: 102g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
PBM27G -
Consigli Scarperia - Maremma in Olivo - Series Kilama MFO18 - knife
Maremma in Olivo - Series Kilama MFO18 - knife
The series Kilama Councils is a modern interpretation of Italian regional knives.
The materials and finishes remain the same as always but the line has the form "new"
that reflect the traditional and regional Italian classics knives.
Total length: 185
Blade length: 80
blade thickness: 2.5
weight. 55g
Steel: 420
manicatura: amaranth wood
Sheath: fabric
Package: Box Advice with cleaning kit knife50157 -
Conaz Consigli Scarperia - Hunchback knife in Olive - Kilama 50153 Series - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Type of production: artisanLama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: olive wood
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 185mm.
Weight: 50g.
Closing: retention spring
Packaging: Tips box with knife cleaning kit
Sheath: fabric caseGAO18 -
Conaz Consigli Scarperia - Senese knife in amaranth - Kilama series SEAM18 - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: amaranth wood
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 185mm.
Weight: 55g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
SEAM18 -
Conaz Consigli Scarperia - Piemontese knife in polished ox - 50046 - knife
Made according to the ancient art of knives, the Piedmontese knife, typical of the Piedmont Region, retains its original sober line.
Solid and functional, the blade is in stainless steel and the handle is a monobloc made of bovine horn.Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 90mm.
Total length: 180mm.
Weight: 50g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
PIC-18 -
Conaz Consigli Scarperia - Anconetano ox horn 20 cm - 50001 - knife
Traditional knife produced by master cutlers in Scarperia, a place where, since 1300, the artisan manufacture of Italian knives has continued.
Fisherman's knife, typical of the Adriatic sea belt. With external spring, handle in full polished bovine horn, on the end of the back it has a deep step at right angle useful for branching nets.
Intended use: CollectionType of production: artisanal
Blade: X50CrMoV15 stainless steel
Production Lama: Italy
Handle: Ox horn
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 200mm.
Weight: 58g.
Closing:
Notes: handcrafted in the city of Scarperia (FI)The colors of the materials with which our handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you. A slight surprise is therefore always accompanied by every online purchase of our handcrafted products: but this is also the beauty of craftsmanship.
50001 -
Conaz Consigli Scarperia - Arbus knife - Arburese Corone Montone 20cm - 53017 - knife
Characteristic Sardinian knife, typical of the Arbus area; with blade with a characteristic bellied shape, very suitable for leather. Traditional shapes and fine finishes.
The shape reached today derives from ancient styles used in past times.
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox wood
Blade length: 85mm.
Blade thickness: 2mm.
Length closed: 115mm.
Total length: 205mm.
Weight: 50g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
2448 -
Andre De Villiers ADV - Alpha-S Flipper Knife Laser Engraved - S35VN & G10 - knife
Intended use: collection/sporting
Type of production: MidTech (partially mechanized craft production)
Country of manufacture: South Africa
Blade: stainless steel CPM-S35VN
Blade finish: satin-finished
Handle: PVD titanium with G10 insert
Blade length: 92mm.
Blade thickness: 4mm.
Length closed: 114mm.
Total length: 206mm.
Thickness when closed: 14mm.
Weight: 150g.
Opening: Carson Flipper system on ball bearings
Closure: Button Lock with additional safety
Clip: titanium, laser engraved
Packaging: Nylon pouch with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-AS-G10E -
Conaz Consigli Scarperia - Zuava knife 16 cm raw ox horn 50307 - knife
Intended use: sporting/collection
Type of production: artisan
Blade production: Italy
Blade: Stainless steel X50CrMoV15
Blade treatment: -
Handle: Raw ox horn
Blade length: 70mm.
Blade thickness: 1,6mm.
Length closed: 90mm.
Total length: 160mm.
Weight: 53g.
Closure: without blade lock
Packaging: cardboard box
Sheath: -Craftsmanship is beautiful because it is varied
The colours of the materials from which the handicrafts are made may vary from those shown in the pictures.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: that's the beauty of fine materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: that's the beauty of fine workmanship. Combine all this and you have a product that is always different and unique. And always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.
50307 -
Andre De Villiers ADV - Badlands Bowie - Dual Tone S35VN, Titanium & Fat Carbon - knife
Intended use: collection/sporting
Type of production: MidTech (partially mechanized craft production)
Country of manufacture: South Africa
Blade: stainless steel CPM SW35VN
Blade finish: Dual Tone - Sandblasted and Satin finish
Handle: Titanium Dual Tone with Fat Carbon Snake Skin insert
Blade Length: 105mm.
Blade thickness: 4.8mm.
Length closed: 130mm.
Total length: 230mm.
Thickness when closed: 17mm.
Balance: backward
Weight: 248g.
Opening: carson Flipper system on ball bearings
Closure: Frame Lock with removable stainless steel clapper
Clip: Titanium Dual Tone, machined from billet, removable and reversible
Packaging: Nylon pouch with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-BB-TF -
Andre De Villiers ADV - Double Flipper Pathfinder Knife - Bronze Titanium
Intended use: collection / sport / military
Type of production: artisan
Country of production: South Africa
Blade: stainless steel N690Co
Blade treatment: dual tone satin
Handle: titanium anodized
Blade length: 100mm.
Blade thickness: 4.7mm.
Length closed: 130mm.
Total length: 226mm.
Thick when closed: 13.2mm.
Balancing: 2cm back from the guard branch
Weight: 212g.
Opening: Flipper type on ball bearings
Closure: FrameLock
Clip: titanium anodized, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-DF-P -
Andre De Villiers ADV - Double Flipper Frag Frame Knife - Black Titanium - knife
Intended use: collection / sports / militaryType of production: artisan seeds
Country of production: South Africa
Blade: N690Co stainless steel
Blade treatment: Black
Handle: Black titanium
Blade length: 100mm.
Blade thickness: 4.7mm.
Closed length: 130mm.
Total length: 226mm.
Thick when closed: 13.2mm.
Balance: 2cm set back from the guard branch
Weight: 212g.
Opening: Flipper on ball bearings
Closure: FrameLock
Clip: anodised titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-DF-B -
Andre De Villiers ADV - Impi - jaracanda burl - knife
Intended use: collection / sport
Type of production: artisan
Country of production: South Africa
Blade: in steel D2
Blade treatment: satin
Handle: in steel, with inserts in Jaracanda briarwood
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 190mm.
Thick when closed: 14mm.
Balancing: set back to 2cm from the guard branch
Weight: 164g.
Opening: Nail Nick
Closure: BackLock
Clip: absent
Packaging: cordura case with ADV Tactical logos
Notes: designed and built by Andre De VilliersADV-IM-RSJ -
Andre De Villiers ADV - Mini Butcher Back Lock Knife - Ebony Wood
Intended use: collection / sport
Type of production: semi-handmade
Country of production: South Africa
Blade: N690Co Stainless Steel
Blade treatment: Satin
Handle: in steel, with ebony wood inserts
Blade length: 52mm.
Blade thickness: 2.2mm.
Length closed: 72mm.
Total length: 124mm.
Thick when closed: 8.5mm.
Balancing: set back
Weight: 44g.
Opening: Nail Nick
Closure: BackLock
Clip: Absent
Packaging: cordura case with ADV Tactical logos
Notes: designed and built by Andre De VilliersADV-MB-E -
Andre De Villiers ADV - Mini Impi Slipjoint Knife - Abalone
Intended use: collection / sport
Type of production: semi-handmade
Country of production: South Africa
Blade: in steel N690Co
Blade treatment: Satin
Handle: in steel, with abalone inserts
Blade length: 52mm.
Blade thickness: 2.2mm.
Length closed: 72mm.
Total length: 124mm.
Thick when closed: 8.5mm.
Balancing: set back
Weight: 44g.
Opening: Nail Nick
Closure: Slipjoint
Clip: Absent
Packaging: cordura case with ADV Tactical logos
Notes: designed and built by Andre De VilliersADV-MI-A -
Andre De Villiers ADV - Mini Harpoon Black - Prototype - folding knife
Intended use: collection / sport / military
Type of production: semi-handmade
Country of production: South Africa
Blade: N690Co steel
Blade treatment: PVD blackwash
Handle: titanium blackwash PVD
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 177mm.
Thick when closed: 11.7mm.
Balancing: set back, at 2cm. from the guard branch
Weight: 108g.
Opening: Carson Flipper type on ball bearings
Closure: FrameLock
Clip: titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: marked as "prototype" - designed and built by Andre De VilliersADV-MH-B -
Andre De Villiers ADV - Impi Back Lock Knife Rosewood - knife
Purpose: collection / sport
Type of production: artisanal seed
Country of Origin: South Africa
Blade: D2 steel
Blade treatment: Satin
Handle: Steel with Rosewood wood inserts
Blade Length: 80mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 190mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 164g.
Opening: Nail Nick
Closing: Back Lock
Clip: -
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-IM-RW -
Andre De Villiers ADV - Ronin Hybrid Folding Flipper Knife - Tan G10
Intended use: collection / sport / military
Type of production: artisan
Country of production: South Africa
Blade: CPM S35VN steel
Blade treatment: satin
Handle: titanium and G10
Blade length: 103mm.
Blade thickness: 4.5mm.
Length closed: 132mm.
Total length: 234mm.
Thick when closed: 14mm.
Balancing: on the guard branch
Weight: 168g.
Opening: Carson Flipper type, on ball bearings
Closing: FrameLock with additional cursor lock
Clip: titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-RH-T -
Andre De Villiers ADV - Double Flipper DF Frame Lock Knife - Grey/Bronze Titanium
Intended use: collection / sports / military
Type of production: artisan seeds
Country of production: South Africa
Blade: N690Co stainless steel
Blade treatment: Satin
Handle: Dual Tone titanium anodized
Blade length: 100mm.
Blade thickness: 4.7mm.
Closed length: 130mm.
Total length: 226mm.
Thick when closed: 13.2mm.
Balance: 2cm set back from the guard branch
Weight: 212g.
Opening: Flipper on ball bearings
Closure: FrameLock
Clip: anodised titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-DF-BP -
Andre De Villiers ADV - Tac Butcher Black knife
Purpose: collection / sport / military
Type of production: artisanal seed
Country of Origin: South Africa
Blade: D2 steel
Blade treatment: black stonewash
Handle: Titanium stonewash
Blade Length: 95mm.
Blade thickness: 4.5mm.
Closed length: 130mm.
Overall length: 226mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 222g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-TB-BW -
Andre De Villiers ADV - Pathfinder Knife OD Green
Purpose: collection / sport / military
Type of production: artisanal seed
Country of Origin: South Africa
Blade: CPM SW35VN steel
Blade treatment: black
Handle: green titanium
Blade Length: 95mm.
Blade thickness: 4.5mm.
Closed length: 130mm.
Overall length: 226mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 210g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-PA-GR -
Andre De Villiers ADV - Pathfinder Knife G2 Black knife
Purpose: collection / sport / military
Type of production: artisanal seed
Country of Origin: South Africa
Blade: CPM SW35VN steel
Blade treatment: black
Handle: black titanium
Blade Length: 95mm.
Blade thickness: 4.5mm.
Closed length: 130mm.
Overall length: 226mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 210g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-PA-B -
Andre De Villiers ADV - Trailboss S Barret Brown Knife
Purpose: collection / sport
Type of production: artisanal seed
Country of Origin: South Africa
Blade: CPM SW35VN steel
Blade Treatment: Sandblasted
Handle: Titanium Desert
Blade Length: 95mm.
Blade thickness: 4.5mm.
Closed length: 130mm.
Overall length: 223mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 216g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-TR-B -
Andre De Villiers ADV - Mini Pathfinder Knife LSCF Ti - knife
Purpose: collection / sport
Type of production: artisanal seed
Country of Origin: South Africa
Blade: CPM SW35VN steel
Blade treatment: Satin
Handle: Titanium bronze with carbon fiber insert
Blade Length: 80mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 190mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 142g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-MP-CF -
Andre De Villiers ADV - Mini Pathfinder Knife 3D Blue Ti - knife
Purpose: collection / sport
Type of production: artisanal seed
Country of Origin: South Africa
Blade: CPM SW35VN steel
Blade treatment: Satin
Handle: blue titanium
Blade Length: 80mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 190mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 144g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-MP-B -
Andre De Villiers ADV - Impi Slip Joint Knife - Jaracanda briar - knife
Intended use: collection / sport
Type of production: artisan seeds
Country of production: South Africa
Blade: in D2 steel
Blade treatment: satin finish
Handle: steel with Jaracanda briar inserts
Blade length: 75mm.
Blade thickness: 4 mm.
Length closed: 100mm.
Total length: 175mm.
Thick when closed: 14mm.
Balance: 2 cm set back from the guard branch
Weight: 120 g.
Opening: Nail Nick
Closure: Slip Joint (without blade lock)
Clip: -
Packaging: cordura case with ADV tactical logos
Notes: Designed and manufactured by Andre De VilliersADV-IM-RS -
Mercury - Logan Orange by Moreno Franzin - knife
Logan is not a common liner, but hides an epic revolution in the constructive concept!
Unlike traditional liners, Logan has no moving pins, but is born from a 5th titanium monolith. The accurate CNC milling machines produce Logan's body: solid, lightweight, slim and highly functional where the blade rotates on the pin, one With the base, to ensure a high strength and sturdiness. The retractable screws in the body give Logan the ultimate touch of clean elegance.
Purpose: Sportsman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 Steel at 61HRC hardened vacuum
Blade treatment: beaded blast
Handle: Titanium monolithic 6AL4V and G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 205mm.
Closed thickness: 9mm.
Weight: 96g.
Opening: In one hand, with removable T-pin, on the back of the blade
Washers: Teflon
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: Upholstered zip pocket
Packing: Cardboard box with Mercury logos
Notes: Design by Moreno FranzinME-LOGOR€188.52Out of stock -
Consigli Scarperia - Maremmano Amaranth wood - Kilama Serie MFMA18 - knife
The series Kilama by Consigli is a modern interpretation of Italian regional knives.
The materials and finishes remain the same as always but the line has the form "new"
Total length: 185
Blade length: 80
Blade thickness: 2.5
Weight. 55g
Steel: 420
Hanfle: amaranth wood
Sheath: -
Package: box with cleaning kit50154 -
Conaz Consigli Scarperia - Hunchback Abruzzese Cattle knife 24cm - knife
This slender-shaped knife with a curved handle derives from ancient models used by the shepherds of Abruzzo. Its adoption in the repertoire of knives manufactured in Scarperia (where the particular crease of the handle earned it the name of "hunchback") dates back to the late nineteenth century and took place without flashy changes compared to the original type, equipped with a simple spring and one-piece bovine horn handle. This model is in horn tip.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 105mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 247mm.
Weight: 107g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50024 -
Conza Consigli Scarperia - Maremmano knife 24cm Ox Horn - 50031 - knife
The first certain information on this knife dates back to 1848. A specimen, dated 1871, is kept in the State Archives of Florence, attached to the documents of a trial against a convicted person. The mark of a Scarperia manufacturer, Gustavo Buffi, is clearly visible on it, the shape of the blade is that with an angled back, also maintained in the twentieth century and present in the catalogs of various firms in Scarperia. The Maremmano is a horn tip model.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 120g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
R-MFC24 -
Consigli Scarperia - Calabrese in bovine R-CAC20 - knife
A native of Calabria, this knife by the blade and pointed straight but has a handle in the most typical style of Scarborough, has a seal consists of two rings round, similar to Fiorentino, although smaller. It is supposed to have been in the past a major reworking of the knives typical Calabrian by the craftsmen of Scarperia that as often happened then have been extensively used to their own tradition. Model in horn tip.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tipR-CAC20 -
Consigli Scarperia - Napoletano in bovine R-NAC20 - knife
The "Neapolitan" old drives is a knife in horn tip elongated, suitable to cut the use of tip. It is not clear which of the knives of the traditional Neapolitan is inspired model of Scarperia. The general line is somewhat related to the "Maremma" in the form assumed in the Mugello, but with more slender proportions and read.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tipR-NAC20 -
Consigli Scarperia - Casertano in bovine R-CASC20 - knife
The most striking feature of this model is in the edge of the blade, a full right to the tip. The Casertano lent itself well to a variety of uses, thanks to the cutting edge straight that finishes in a very simply shaped handle. This solution was very appreciated in different times and places, even outside the area where it originated, as to be still widespread. The Caserta is a model in horn tip.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 70 gr.
Handle in horn tipR-CASC20 -
Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 17cm - 53161 - knife
Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 170mm.
Weight: 34g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
PBM17G -
Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 20cm - 53162 - knife
Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 50g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
PBM20G -
Conaz Consigli Scarperia - Buffalo horn screed - Kilama 50159 series - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Weight: 63g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseRAB18 -
Consigli Scarperia - Zuava Cattle Polished R-ZXC19 - knife
Zuava Cattle Polished R-ZVC19 - knife
Traditional knife of Scarborough and is used in all of Tuscany to the first 800. He had an element of novelty, for its time: the metal frame inside the handle as well in traditional cattle.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 19 cm.
Weight 100 gr.R-ZXC19 -
Conaz Consigli Scarperia - Zuava ox horn - cm 19 - 50077 - knife
Traditional Scarperia knife and used throughout Tuscany until the early 1800s. It had an element of novelty, for the time: the metallic structure inside the handle as well as in the traditional bovine.
440 stainless steel blade.
Blade length 8 cm.
Blade thickness 3 mm.
Open length 19 cm.
Weight 100 gr.50077 -
Conaz Consigli Scarperia - 24cm ox horn Zuava with blade lock - 50079 - folding knife, made in Italy
Intended use: collection
Type of production: handmade
Country of Production: Scarperia - Italy
Blade: stainless steel X50CrMoV15
Blade finish: satin-finished
Handle: ox horn and brass
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Weight: 193g.
Closure: blade lock
Packaging: cardboard box with Consigli logos
Sheath: fabric pouch
Handicrafts are beautiful because they are varied!
The colors of the materials from which crafts are made may vary from those shown in the pictures.
Horn, deer, and wood are raw materials that by their nature have distinct variability from one supply to the next-that's the beauty of fine materials. Add craftsmanship, where the artisan's hand never makes the same gesture: that's the beauty of craftsmanship. Combine all this and you have a product that is always different and unique. Always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.50079 -
Conaz Consigli Scarperia - Palmerino horn cattle PA2C20 two blades - knife
Palmerino horn cattle PA2C20 two knives - knife
The production of Scarborough has not devoted much attention to penknives.
It was, however, made a template from the desk, which in the past was used to make the tip of the quill pens and pencils.
This sharpener Scarperia was always devoid of spring and could have from one to two blades; unmistakable the shape of the handle, in a single piece of horn.
In the catalogs of the early years of the twentieth century these items were listed as "sharpeners use Palmerini" which was actually the name of a renowned manufacturer of the nineteenth century.
Proposed model is at the tip of the horn two blades.Stainless steel blade 440.
Blade length 4.6 cm.
Blade thickness 2.5 mm.
Overall length 15 cm.
Weight 40 gr.PA2C20 -
Consigli Scarperia - Rasolino in bovine RAC-20 - Knife
Rasolino in bovine RAC-20 - Knife
The name of this knife comes from the shape of the blade, reminiscent of the razor.
Had spread following the law Giolitti in 1908 which placed severe limitations to the port of sharp knives, and that favored the production of various models in a truncated tip.
The Rasolino is distinguished by the slight curvature of the blade and back to the shape of the handle.Stainless steel blade 440.
Blade length 9 cm.
Blade thickness 2.5 mm.
Overall length 20 cm.
Weight 70 gr.RAC-20 -
Conaz Consigli Scarperia - Fiorentino knife Engraved Silver Cattle 50017 - knife
The silver Fiorentino version has the same construction characteristics as the classic Fiorentino, but it is made with silver finishes, in the lily, in the band and in the rings worked by hand by skilled engravers. Horn tip model.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and Silver with handcrafted engravings
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 76g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which our handcrafted products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
R-FIC20A