Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Fox - N.E.R.O. Nighthawk CobalTitanium - FX117CT - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: still in production.
* Sharpening: Professionally re-sharpened.
* Marks on blade: None
* Marks on handle: a few small marks on clip, hardware, and aluminum spacer
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory
Intended Use: TacticalProduction type: Industrial
Country of Production: Italy
Blade: N690Co 58HRC steel with Grade 5 titanium back (49-50HRC)
Blade finish: stonewashed
Handle: G10
Blade length: 91mm.
Blade thickness: 5mm.
Length closed 127mm.
Total length: 216mm.
Thickness when closed: 25mm.
Balance: Backward, 3cm from the top of the guard.
Weight: 186g.
Latch: Liner Lock, with manual insertion safety
Clip: Stainless steel, reversible
Notes: previously purchased knife, withdrawn from private collectionFX-117CT-CP -
Fox - Anzu by Les George - PVD MagnaCut & Carbon Fiber - FX-560 CFOR - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production:Italy
Blade:Steel CPM-MagnaCut 59/61HRC
Blade finish: Black PVD
Handle: 3K carbon fiber with stainless steel inner folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm
Weight: 105g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stainless steel Black Idroglider
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les GeorgeFX-560CFOR -
Fox - Italico Drop - FX-540B - Black Top Shield N690Co & Black FRN - pocket knife
"The Italico was born almost on its own... Following the market novelties, which are always numerous, I thought of designing a folder that was very compact and that expressed solidity from the very first impact, once gripped. The salient features that had to be present were: an excellent grip, a prerogative I try to apply in all my designs, and a type of blade that was very usable even for heavy work, despite its small size. After the first sketches were made, the ITALICO was born." - ADG - Antonio Di Gennaro
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 59/61HRC
Blade finish: Black Top Shield
Handle: FNR (Fiberglass Reinforced Nylon)
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Weight: 78g.
Closure: LinerLock
Clip: flush, AISI 302 stainless steel with PVD treatment, removable and reversible
Packaging: cardboard box with Fox Knives logos
Notes: Design by ADG Antonio Di Gennaro - Ball bearing opening movement - Carson Flipper opening systemFX-540B -
Fox - Zero 2.0 Desert Warrior by Jens Anso - Black Top Shield & Black - FX-311B - knife
The Zero 2.0 Desert Warrior, an evolution of the iconic Zero, is the culmination of years of research for the perfect everyday carry knife. The new version is an homage to the rugged landscapes and harsh environments in which adventurers often find themselves. The earthy coloring of the handles and unique blade finishes evoke the spirit of the desert, a place where resilience, adaptability and strength are paramount.
The addition of an opening hole in the blade transforms this knife into a one-handed wonder. The handle is a work of art in itself, featuring the distinctive Anso Texture. This knife is more than a tool: it is a trusted companion for those who dare to explore, conquer and thrive in any environment.
Welcome to the next chapter of the Zero Legacy!
Intended Use: Sporting
Type of production: industrial
Country of manufacture: Italy
Blade: stainless steel Becut 56/58HRC
Blade finish: Black Top Shield
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 97m.
Total length: 160mm.
Sleeve thickness: 15mm.
Weight: 56g.
Locking mechanism: back lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jens AnsoFX-311B -
Fox - Vulpis multi-tool 4 - M390 & Carbon Fiber - FX-VP130-S4-CF - knife
The new Vulpis series by Fox Knives wants to make you fall in love with Made in Maniago technology and production innovation with the new small and versatile multipurpose.
Intended use: EDC
Type of production: Industrial
Country of production: Italy
Blade: M390 59/60HRC stainless steel
Blade Finish: Stonewashed
Handle: Carbon Fiber
Blade length: 55mm.
Blade thickness: 2mm.
Closed length: 63m.
Total length: 135mm.
Closed thickness: 13mm.
Weight: 47g.
Closure: SlipJoint (without blade lock)
Clips: -
Scabbard: -
Packaging: Cardboard box with Vulpis / Fox Knives logosTOOLS INCLUDED: wood saw, flat screwdriver, capsule opener, box opener, chisel
FX-VP130-S4-CF -
Fox - Vulpis knife - M390 & Carbon Fiber - FX-VP108CF - knife
The new Vulpis series from Fox Knives wants you to fall in love with Made in Maniago technology and manufacturing innovation with the new small and versatile multipurpose.
Intended Use: EDC
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 59/60HRC stainless steel
Blade finish: Stonewashed
Handle: Carbon Fiber
Blade Length: 44mm.
Blade thickness: 2mm.
Length closed: 63m.
Total length: 106mm.
Thickness when closed: 6mm.
Weight: 17g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: -
Packaging: Cardboard box with Vulpis / Fox Knives logos.FX-VP108CF -
Fox - Wihongi knife - FX-650 - N690 & G10 black - knife
Intended use: Sport
Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: black Idroglider stone washed
Handle: black G10
Blade length: 64mm.
Blade thickness: 4mm.
Closed length: 90mm.
Total length: 157mm.
Closed thickness: 12mm
Weight: 90g.
Closure: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos, zip pouch
Note: -FX-650 -
Fox - PIKAL - Folding Karambit by Giuliano Ron - FX-826 - Knife
The Fox Pikal is a folding tactical knife specifically designed for martial arts practitioners. It was created with the collaboration of the personal defense instructor Giuliano Ron who, after two years of severe tests, combined the advantages of the Pikal style (handle with blade pointing down and edge facing the person) with the Karambit (rear ring for the index)
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Black Idroglider
Handle: G10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 182mm.
Weight: 113g.
Clip: reversible and removable, in painted stainless steel
Packaging: Cardboard box with Fox logos
Notes: Design by Giuliano RonFX-826 -
Fox - TRIBAL K - Karambit Knife by Doug Marcaida - FX-802
Intended use: Tactical / Collection
Production type: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Black Idroglider
Handle: G10
Blade length: 50mm of cutting edge and 70mm of blade
Blade thickness: 3mm
Overall length: 150mm
Weight: 105g
Clip: Steel
Packaging: Cardboard box with Fox logos
Notes: Design by Doug MarcaidaFX-802 -
Fox - Phi Black PVD - Bali Knife by Vincenzo Fiore - FX-570TIB - Knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390
Blade finish: Black PVD
Handle: Titanium
Blade length: 115mm. (wire length 95mm.)
Blade thickness: 4mm.
Total length: 255mm.
Weight: 138g.
Locking system: not present
Clip: not present
Packaging: Cardboard box with Fox logos - Leather pouch
Notes: Design by Vincenzo Fiore, designer specializing in balisongs - Each piece is numbered, but this is not a limited edition.FX-570TIB -
Fox - Moa - Folding Karambit by Jared Wihongi - FX-653 - Knife - Made in Italy
Intended Use: Tactical / Military
Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 190mm.
Weight: 120g.
Locking system: Liner Lock, with additional safety.
Clip: removable and reversible, painted stainless steel
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)FX-653 -
Fox - Chnops by Gobbato - FX-543ALB - M390 and Carbon Fiber - knife
Intended use: sports/collection
Production type: Industrial
Country of Production: Italy
Blade: stainless steel M390 60/62HRC
Blade finish: Black PVD
Handle: Carbon Fiber
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm
Weight: 78g.
Lock mechanism: liner lock
Clip: removable and reversible, bronze oxidized titanium
Packaging: Cardboard box with Fox Knives logos and faux leather zippered case
Notes: Design by Riccardo GobbatoFX-543CFBR -
Fox - Chnops by Gobbato - FX-543ALB - Becut and Aluminum Black - knife
Destinazione d'uso: sportivo/collezione
Tipo di produzione: Industriale
Paese di produzione: Italia
Lama: in acciaio inox Becut 56/58HRC
Finitura lama: Black Top Shield
Manicatura: Alluminio Anodizzato
Lunghezza lama: 70mm.
Spessore lama: 3mm.
Lunghezza chiuso: 102m.
Lunghezza totale: 180mm.
Spessore manicatura: 12mm
Peso: 78g.
Meccanismo di chiusura: Liner Lock
Clip: amovibile e reversibile, in acciaio inox
Confezione: Scatola di cartone con loghi Fox Knives
Note: Design by Riccardo GobbatoFX-543ALB -
Fox - Chilin by Vox - FX-530G10B - N690Co and Black G10 - knife
Intended use: sporting/collection
Production type: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co 58HRC
Blade finish: Stone Washed
Handle: G10
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 113m.
Total length: 193mm.
Sleeve thickness: 16mm
Weight: 110g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos - Zip pouch
Notes: Design by Jesper VoxnaesFX-530G10B -
Fox - Chilin by Vox - FX-530CF - M398 and Carbon Fiber - knife
Intended use: sports/collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M398 61HRC
Blade finish: Satin
Handle: HDL carbon fiber
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 113m.
Total length: 193mm.
Sleeve thickness: 16mm
Weight: 106g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos - Zip pouch
Notes: Design by Jesper VoxnaesFX-530CF -
Fox - Core knife by Vox - FX-604CF - Elmax - Carbon Fiber - knife
Intended use: sports / collection
Type of production: Industrial
Country of production: Italy
Blade: Elmax 59 / 60HRC stainless steel
Blade finish: PVD
Handle: HDL carbon fiber
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Sleeve thickness: 18mm
Weight: 135g.
Closing mechanism: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper type opening on ball bearings - Design by Jesper VoxnaesFX-604CF -
Fox - Saturn by D. Simonutti - Acid Stonewashed Aluminum - FX-551ALG - knife
Intended Use: Sporting / Collection
Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: Acid Stonewashed
Handle: Anodized Aluminum
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Aluminum machined from billet
Packaging: box with Fox Knives logos, zippered nylon pouch, PVC patch with velcro, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"FX-551ALG -
Fox - Saturn by D. Simonutti - Black Aluminum - FX-551ALB - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade treatment: Idroglider Blackwashed
Handle: Anodized aluminum
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Aluminum machined from billet
Packaging: box with Fox Knives logos, zippered nylon pouch, PVC patch with velcro, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"FX-551ALB -
Fox - Saturn by D. Simonutti - Satin Titanium - FX-551Ti - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 58/60HRC
Blade treatment: Satin finish
Handle: Titanium with PVD Blacwashed treatment
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Titanium machined from solid
Packaging: box with Fox Knives logos, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"FX-551Ti -
Fox - Eastwood Tiger by Gudy Van Poppel - Black G10 - FX-524B - knife
Intended Use: Sporting / Tactical
Production type: Industrial
Country of Production: Italy
Blade: Steel D2 59/61HRC
Blade finish: Black Idroglider
Handle: G10 with aluminum spacer
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 132mm.
Total length: 227mm.
Thickness when closed: 14mm.
Weight: 175g.
Closure: Liner Lock
Clip: removable, in stainless steel AISI 420J2B with Black Idroglider treatment
Sheath: leather, felt and nylon pouch, with zipper
Package: Cardboard box with Fox Knives logos
Notes: Design by Gudy Van Poppel - Opening movement on ball bearings - Carson Flipper opening systemFX-524B -
Gerber - DoubleDown Folding Machete Black - G31-001530N - knife
The DoubleDown Folding Machete is a Made in USA hiking tool that offers never-before-seen functionality combined with innovative design.
Folding down to half its size, the DoubleDown can be easily stored in a backpack, attached to a belt, or hooked to a MOLLE system. The unique design allows the user 3 distinct functions in one compact tool: chopping, chopping, and batoning.
A patented locking system engages in 3 different positions to ensure safe operation in any level of tool stress.
Intended Use: Hiking
Type of production: industrial
Blade: full tang, 420HC stainless steel
Blade finish: Black Coating
Country of production: USA
Handle: Polymer
Blade length: 178mm.
Blade thickness: 3mm.
Length closed: 203mm.
Total length: 381mm.
Locking system: QuadLock
Weight: 514g.
Sheath: Nylon, belt, MOLLE compatible.
Notes: -G31-001530N -
Fox - Baby Core by Vox - FX-608CF - Carbon Fiber - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Satin
Handle: Carbon Fiber with AISI 303 stainless steel screws
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 60g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: wire, AISI 302 stainless steel, removable and reversible
Scabbard: leather
Package: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening systemFX-608CF -
Fox - Baby Core by Vox - FX-608B - Black & Dark Stonewashed - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Dark Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-608B -
Gerber - Key Note Flipper - Satin & Black - 30-001691 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 7Cr17Mov stainless steel
Blade treatment: Satin finish
Handle: Aluminum
Blade length: 25.4mm.
Blade thickness: 3.8mm.
Length closed: 50.8mm.
Total length: 76.2mm.
Weight: 66g.
Closing: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Gerber logos
Notes: Opening via Carson Flipper systemG30-001691 -
Fox - Radius by D. Simonutti - Black G10 - FX-550G10B - knife
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Stonewashed
Handle: G10d
Blade length: 75mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 185mm.
Weight: 106g.
Closing: Fingers Safe Opening System
Clip: Stainless steel, flush
Packaging: box with Fox Knives logos, Nylon sheath with zip
Notes: Design by Denis Simonucci - Winner of the 2019 Blade Show in Atlanta as "Knife of the year" and "Imported knife of the year"FX-550G10B -
Fox - Radius by Denis Simonucci - Black PVD Titanium - FX-550TIB - knife
Intended use: Sports / Collection
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Black PVD
Handle: Titanium with Black PVD treatment
Blade length: 75mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 185mm.
Weight: 140g.
Closing: Fingers Safe Opening System
Clip: Titanium machined from solid
Packaging: box with Fox Knives logos, pouch with zip
Notes: Design by Denis Simonucci - Winner of the 2019 Blade Show in Atlanta as "Knife of the year" and "Imported knife of the year"FX-550TIB -
Fox - Libar SlipJoint knife - Carbon - FX-582CF - knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Carbon Fiber
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 155mm.
Thick when closed: 8.8mm
Weight: 38g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: Leather pouch with Fox Knives logos
Packaging: Cardboard box with Fox Knives logosFX-582CF -
Fox - Livri SlipJoint knife - Carbon Fiber - FX-273CF - knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Carbon Fiber
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 155mm.
Thick when closed: 8.8mm
Weight: 45g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: Leather pouch with Fox Knives logos
Packaging: Cardboard box with Fox Knives logosFX-273CF -
Fox - Mini-TA - Black Nylon - Sandblasted - FX-536 - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with Fox logos and embroidered fabric key ringFX-536 -
Fox - Pelican knife by Kmaxrom - FX-534CF - Idroglider Carbon Fiber - knife
Destination of use: sports
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: black idroglider
Handle: Carbon Fiber with stainless steel liners
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 123mm.
Total length: 210mm.
Thick when closed: 18mm
Weight: 160g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon case with zip
Packaging: cardboard box with Fox Knives logos
Notes: Design by Kmrj KmaxromFX-534CB -
Fox - Pelican knife by Kmaxrom - FX-534B - Idroglider Black G10 - knife
Destination of use: sports
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: black idroglider
Handle: G10 with stainless steel folders
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 123mm.
Total length: 210mm.
Thick when closed: 18mm
Weight: 160g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon case with zip
Packaging: cardboard box with Fox Knives logos
Notes: Design by Kmrj KmaxromFX-534B -
Fox - Suru by Vox - Carbon Fiber & Blue Titanium - FX-526CFBL - Knife
Intended use: Sports / Tactical / Collection
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin
Handle: Carbon fiber and anodized titanium
Blade length: 60mm.
Blade thickness: 4mm.
Length closed: 88m.
Total length: 148mm.
Thick when closed: 11mm
Weight: 64g.
Closure: FrameLock in carbon fiber with stainless steel knocker
Clip: titanium anodized, machined from solid
Packaging: Display box made of transparent film
Notes: Opening by Carson Flipper system - Ball bearing movement - Design by Jesper Voxnaes - Winner of the 2018 Blade Show as "Overall Knife of the Year"FX-526CFBL -
Fox - Suru by Vox - Carbon Fiber & Bronze Titanium - FX-526CF - Knife
Intended use: Sports / Tactical / Collection
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin
Handle: Carbon fiber and anodized titanium
Blade length: 60mm.
Blade thickness: 4mm.
Length closed: 88m.
Total length: 148mm.
Thick when closed: 11mm
Weight: 64g.
Closure: FrameLock in carbon fiber with stainless steel knocker
Clip: titanium anodized, machined from solid
Packaging: Display box made of transparent film
Notes: Opening by Carson Flipper system - Ball bearing movement - Design by Jesper Voxnaes - Winner of the 2018 Blade Show as "Overall Knife of the Year"FX-526CF -
Fox - Suru by Vox - Aluminium Black - FX-526ALB - Knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: Black Idroglider stonewashed
Handle: stonewashed aluminum
Blade length: 60mm.
Blade thickness: 4mm.
Length closed: 88m.
Total length: 148mm.
Thick when closed: 11mm
Weight: 84g.
Closing: Frame Lock with stainless steel knocker
Clip: burnished stainless steel
Packaging: cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Aluminum version of the model SURU Carbon Fiber, winner of the Blade Show 2018 as "Overall Knife of the Year"FX-526ALB -
Fox - Mini-Ka - Black Nylon - Sandblasted - FX-535 - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logosFX-535 -
Fox - Mini-Ka - Black Nylon and Idroglider - FX-535B - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logosFX-535B -
Fox - Shadow Titanium Frame Lock by Bastinelli - FX-533CF - knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel from Elmax powders
Blade treatment: Stonewashed
Handle: Carbon Fiber and Titanium
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 123mm.
Total length: 220mm.
Thick when closed: 13mm.
Weight: 140g.
Opening: via the Carson-Flipper system
Washers: in steel, with ball bearings
Closure: Framelock, with removable stainless steel door
Clip: stainless steel, removable
Packaging: cardboard box with Fox FKMD logos; Leather-like zip sheath
Notes: Design by Bastinelli KnivesFX-533CF -
Fox - Rescue Karambit G10 Nero - FX-599 RS - Coltello
Intended use: rescue / emergency
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co
Blade treatment: Teflon coating
Grip: steel folders, G10 grips
Blade length: 62mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 178mm.
Thick when closed: 13.3mm.
Weight: 112g.
Opening: Carson Flipper system / opening hole on the blade / opening simil emerson wave in pocket extraction
Washers: stainless steel, with ball bearings
Closure: Liner Lock, with additional manual safety
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Fox FKMD logos
Notes: Skull Crasher on the front of the handle - quick-release carabiner in the rear ring - Phillips screwdriver on the upper guard branchFX-599RS -
Fox - Core knife by Vox - FX-604 - black - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Lama treatment: -
Handle: FRN
Blade length: 75mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 188mm.
Thick when closed: 18mm
Weight: 135g.
Closure: Liner Lock
Clip: steel
Sheath: -
Packaging: cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-604 -
Fox - Core Black knife by Vox - FX-604B - black - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Lama treatment: Ceracote
Handle: FRN
Blade length: 75mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 188mm.
Thick when closed: 18mm
Weight: 135g.
Closure: Liner Lock
Clip: steel
Sheath: -
Packaging: cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-604B -
Fox - Black Bird Karambit by Bastinelli and Bram Frank - Black - FX-591 - knife
Purpose: Sportsman / Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Black Idroglider
Handle: G10
Blade Length: 65mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total Length: 170mm.
Closure thickness: 14mm.
Balance: -
Weight: 98g.
Opening: KOR Kinetic Opening Ramp system by Bram Frank
Washers: Brass, with ball bearings
Closure: Liner Lock
Clip: Stainless steel removable and reversible
Sheath: -
Packing: Cardboard box with Fox logos
Notes: Aluminum ring - Design by BastinelliFX-591 -
Fox - Mini Karambit Titanium Framelock - Bronze CeraKote - FX-599TiC - Knife
Target: Tactical / CQC
Type of production: Industrial
Country of production: Italy
Blade: stainless steel Elmax 59/61HRC
Blade treatment: Black Hidroglider
Handle: carbon fiber and bronze CeraKote titanium
Blade Length: 62mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Total length: 174mm.
Closed thickness: 11mm.
Weight: 82g.
Opening: Carson Flipper system and Emerson Wave
Washers: Brass
Closure: Titanium Framelock with Stainless Steel Swing
Clip: Titanium, removable and reversible
Sheath: zip pocket in synthetic leather
Packing: cardboard box with Fox logos
Notes: Patents Emerson Pat. 5.878.500FX-599TiC -
Fox - Mini Karambit Titanium Framelock - FX-599TiCS - Knife
Target: Tactical / CQC
Type of production: Industrial
Country of production: Italy
Blade: Elmax stainless steel 59/61HRC
Blade treatment: satin finish
Handle: carbon fiber and titanium
Blade Length: 62mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Total length: 174mm.
Closed thickness: 11mm.
Weight: 82g.
Opening: Carson Flipper system and Emerson Wave
Washers: Brass
Closure: Titanium Framelock with Stainless Steel Swing
Clip: Titanium, removable and reversible
Sheath: zip pocket in synthetic leather
Packing: cardboard box with Fox logos
Notes: Patents Emerson Pat. 5.878.500FX-599TiCS -
Fox - BB Drago Piemontes FRN Black by Bastinelli - FX-519 - Knife
intended use: sports / EDC
Type of production: Industrial
Production Country: Italy
Blade: N690 stainless steel
Blade treatment: Satin finish
Handle: FRN Fiberglass Reinforced Nylon
Blade length: 47mm.
Blade thickness: 3 mm.
Closed Length: 85mm.
Overall length: 105mm.
Thickness when closed: 10mm
Weight: 30g.
Closure: Slipjoint - lock free
Clip: None
Sheath: Leather pocket
Packaging: Cardboard box with logos Fox Knives
Notes: Design by Bastinelli KnivesFX-519 -
Fox - Slim Dragotac Piemontes FRN Black by Bastinelli - FX-518 - knife
intended use: sports / EDC
Type of production: Industrial
Production Country: Italy
Blade: N690 stainless steel
Blade Treatment: satin finish
Handle: FRN Fiberglass Reinforced Nylon
Blade length: 81mm.
Blade thickness: 3 mm.
Closed Length: 128mm.
Overall length: 182mm.
Thickness when closed: 11mm
Weight: 52g.
Closure: Slipjoint - lock free
Clip: absent
Sheath: Leather pocket
Packaging: cardboard box with Fox Knives logos
Notes: Design by Bastinelli KnivesFX-518 -
Fox - Tur Black by Vox - FX-528B - Knife
Intended use: Sports / Tactical
Type of production: Industrial
Production Country: Italy
Blade: stainless steel Elmax 59 / 61HRC
Blade treatment: PVD
Handle: Carbon fiber with titanium spacer
Blade length: 75mm.
Blade thickness: 3.5mm.
Closed Length: 103m.
Overall length: 178mm.
Thick when closed: -
Weight: 95g.
Lock: Liner Lock
Clip: Titanium
Sheath: -
Packaging: Cardboard box with logos Fox Knives
Notes: Design by Jesper VoxnaesFX-528B -
Fox - Ron Lake Folding G10 - FX-RL01 G10 - knife
Intended use: Sport / Hunting
Type of production: Industrial
Production Country: Italy
Blade: stainless steel N690Co
Blade treatment: Satin
Handle: G10
Blade length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Overall length: 182mm.
Thick when closed: -
Balancing: -
Weight: 116g.
Closure: Back Lock system with additional security
Clip: -
Sheath: leather, with vertical through belt
Packaging: Cardboard box with logos Fox Knives
Notes: design by Ron Lake12383 -
Fox - Chiroptera Karambit by Derespina - FX-590 - knife
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: in acciaio inox N690Co
Trattamento Lama: Teflonata
Manicatura: G-10
Lunghezza lama: 55mm.
Spessore lama: 3mm.
Lunghezza chiuso: 125mm.
Lunghezza totale: 155mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 110g.
Chiusura: Liner Lock
Clip: Amovibile e reversibile, in acciaio inox
Fodero: -
Confezione: Scatola di cartone con loghi Fox FKMD
Note: Realizzato per Derespina Knives USAFX-590 -
Fox - FKMD - E.R.T. Rescue Black - FX-213 TS knife
Type of production: industrial
Blade: Stainless steel N690Co
Treatment Blade: Teflon
Handle material: ABS resin with non-slip inserts
Blade length: 78mm.
Blade Thickness: 5mm.
Closed Length: 120mm.
Total length: 200mm.
Balance: -
Weight: 172g.
Lock: Liner Lock
Clip: removable stainless steel;
Sheath: Kydex with spring attachments
Notes: multi-purpose knife, evacuation hammer, screwdriver bits 2FX-213TS -
Fox - FKMD - 49° Capricorn - FX-ALSR-49 - knife
Designed to solve emergency and survival situations, it is particularly suitable for its characteristics as equipment for pilots, aircraft crews and paratroopers.
This knife is currently supplied to the 49th "Capricorn" Air Cavalry Helicopter Squadron Group stationed at the "Francesco Baracca" barracks in Casarsa della Delizia (PN) with tasks of armed reconnaissance, armed escorts, attack, deep attack, precision attack, fire support, suppression of air defense centers and security. They also contributed from the sky to the ground security of the Italian contingents in Somalia, Albania, Kosovo.
Intended use: Tactical
Blade: N690Co stainless steel
Lama Italy production
Handle: G-10 black
Blade length: 100mm.
Blade thickness: 3mm.
Closed length: 145mm.
Total length: 240mm.
Balancing: -
Weight: 230g.
Closure: Liner Lock
Clip: removable, in stainless steel
Sheath: rigid, thigh, in green nylon
Notes: emergency belt cutter, wood saw with liner lock closure - double safety lock to prevent blade closureFX-ALSR-49 -
Fox - Havoc Black Clip - FKU-HV02TIB coltello
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: Verniciatura
Manicatura: G10 e Titanio
Lunghezza lama: 100mm.
Spessore lama: 4mm.
Lunghezza chiuso: 135mm.
Lunghezza totale: 235mm.
Spessore da chiuso: 13mm.
Bilanciatura: -
Peso: 134g.
Chiusura: Frame Lock
Clip: in titanio
Fodero: -
Confezione: scatola in cartone con loghi Fox
Note: Design by Mikey Vellekamp7734C -
Fox - N.E.R.O. Nighthawk Black - FX117T coltello
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio N690Co 58HRC
Trattamento Lama: Teflonatura
Manicatura: G10
Lunghezza lama: 91mm.
Spessore lama: 5mm.
Lunghezza chiuso 127mm.
Lunghezza totale: 216mm.
Spessore da chiuso: 25mm.
Bilanciatura: Arretrata, a 3 cm dalla sommità della guardia
Peso: 206g.
Chiusura: Liner Lock, con sicura ad inserimento manuale
Clip: In acciaio inox, reversibile
Fodero: -
Confezione: Scatola di cartone con loghi Fox
Note: -FX-117T -
Fox - N.E.R.O. Nighthawk CobalTitanium - FX117CT knife
Fox - N.E.R.O. Nighthawk CobalTitanium - FX117CT knife
Intended Use: Tactical
Type of production: Industrial
Production Blade: Italy
Blade: 58HRC steel N690Co back with Titanium Grade 5 (49-50HRC)
Treatment Blade: Shot peening
Handle material: G10
Blade length: 91mm.
Blade thickness: 5mm.
Closed Length 127mm.
Total length: 216mm.
Thick when closed: 25mm.
Balance: Situated away, at 3 cm from the top of the Guard
Weight: 186g.
Lock: Liner Lock, with safe hand installation
Clip: Stainless steel, reversible
Sheath: -
Packaging: Cardboard box with Fox logos
Notes: -FX-117CT -
Fox/Combative Edge - M1S Serrated knife - PRIVATE COLLECTION - CED-01S - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory
Intended use: Tactical / CollectionType of production: Industrial
Blade production: Italy
Blade: N690Co 58HRC stainless steel
Blade Treatment: DLC
Handle: G-10 and titanium
Blade length: 95mm. partially serrated edge
Blade thickness: 4mm.
Closed length: 130mm.
Total length: 225mm.
Thickness when closed without clip: 10mm.
Balancing: -
Weight: 152g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -AP-CED-01S -
Fox - Anzu by Les George - PVD Stonewashed MagnaCut & G10 - FX-560 G10B - pocket knife
Les George designed the ANZU to have maximum handle ergonomics, ensuring a firm grip, MAGNACUT drop point blade maximizes cutting capacity and steel corrosion resistance. The VERSO Lock opening mechanism gives this knife maximum efficiency. Dual thumb pins and VERSO lock make the knife easy to open and close with both hands. The clip allows for easy carrying, making the knife always ready for use.
Intended Use: Tactical/SportingType of production: Industrial
Country of manufacture:Italy
Blade:CPM-MagnaCut 59/61HRC steel
Blade finish: Black Stonewashed PVD
Handle: G10 with internal stainless steel folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm.
Weight: 113g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stainless steel Black Idroglider
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les GeorgeFX-560G10B -
Fox - Core Tanto knife by Vox - FX-612BB - Top Shield black - Black - knife
The Core Tanto series is designed with knives in mind that can be relied upon in any environment, thanks to a solid, sturdy blade with a strong point to penetrate and a sharp main bevel.
The Core Tanto is the perfect tool for days outdoors.Intended use: Sporting / Tactical
Production type: Industrial
Country of manufacture: Italy
Blade: N690 59/60HRC stainless steel
Blade finish: Top Shield® black
Handle: FRN
Blade length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper-type opening on ball bearings - Design by Jesper VoxnaesFX-612BB -
Fox - Core Tanto by Vox - FX-612BS - Acid Stonewashed Black - knife
Intended Use: Sporting / Tactical
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690 59/60HRC
Blade finish: Acid Stonewashed
Handle: FRN
Blade Length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes - Acid etching on the blade restores an already "worn" aesthetic appearance and each individual knife may have different finishes/colors/shades than the product in the pictures.FX-612BS -
Fox - Chnops by Gobbato - FX-543DBL - Damasteel and PVD Titanium - knife
Intended use: sporting/collection
Type of production: Industrial
Country of Production: Italy
Blade: stainless steel damsco Damasteel DS93X Gysinge 62/64HRC
Blade finish: -
Handle: Stonewashed PVD titanium
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm.
Weight: 105g.
Locking mechanism: Liner Lock
Clip: removable and reversible, purple oxidized titanium
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Riccardo GobbatoFX-543DBL -
Fox - Anunnaki knife Black - FX-505 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in excellent condition
* Available on the market: in 2022 still in production
* Sharpening: our internal laboratory Coltelleria Collini
* Marks on the blade: some marks on the blade
* Marks on the handle: No
* Box: Yes, original, in perfect condition
* Sheath: yes, original, in perfect condition
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratoryIntended use: Tactical / Sports
Type of production: Industrial
Production Lama: Italy
Blade: N690Co stainless steel
Blade treatment: PVD
Handle: G-10 Black
Blade length: 105mm.
Blade thickness: 4mm.
Closed length: 150mm.
Total length: 260mm.
Thick when closed: - 21mm.
Balancing: -
Weight: 326g.
Closure: Back Lock
Clip: Removable and reversible, in stainless steel
Sheath: in cordura
Packaging: Cardboard box with Fox FKMD logosAP-FX-505 -
Fox - Saturn knife by D. Simonutti - Black PVD Titanium - FX-551TiPVD - knife
Intended Use: Sporting / Collection
Type of production: Industrial
Country of Production: Italy
Blade: stainless steel M390 58/60HRC
Blade treatment: PVD Blacwashed
Handle: Titanium with PVD Blacwashed treatment
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Titanium machined from solid
Packaging: box with Fox Knives logos, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"FX-551TiPVD -
Fox - Yaru by Vox - Special Edition In SanMai SPG2 Steel - PVD Stonewashed - CO-527TIPVD - knife
With this exclusive edition of Coltelleria Collini in collaboration with Fox we have chosen to match a model with a particular design like the Yaru with a Japanese powder (sintered) and rolled steel (SanMai) by Takefu Steel.
For this project we chose to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and sharpening durability, while at the same time ensuring a remarkable resilience and resistance to oxidation due to the blade lamination process.
Intended Use: Sporting / CollectionProduction type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Treatment: Satinized
Handle and screws: Stonewashed PVD Titanium and screws in titanium anodized bronze
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 105g.
Closure: Frame Lock with stainless steel hinge
Clip: HDL anodized Titanium, billet machined
Scabbard: Zip pouch
Package: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive version by Coltelleria Collini, Sprint Run in only 6 not numbered pieces, with Japanese stainless steel Takefu Steel SPG2 Rolled.
The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.CO-527TIPVD -
Fox - Baby Core by Vox - Black - SanMai SPG2 Special Edition - CO-608B - knife
With this exclusive edition of Coltelleria Collini in collaboration with Fox we have chosen to combine the pocket knife Baby Core by Vox with a Japanese powder steel (sintered) and rolled steel (SanMai) by Takefu Steel.
For this project we have chosen to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to ensure exceptional cutting performance and durability of the sharpening, while ensuring a remarkable resilience and resistance to oxidation given by the lamination process of the blade.
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Finish: Satin
Handle: FRN (Fiberglass Reinforced Nylon) with stainless steel liners
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 79g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: flush, AISI 302 stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening system - Exclusive version by Coltelleria Collini, Sprint Run, with Japanese Takefu Steel SPG2 Rolled Stainless Steel.The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.FX-CO608B -
Fox - Core knife by Vox - Special Edition in SanMai SPG2 Steel - Black - CO-604-B - knife
With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine a Japanese model such as the Core with a Japanese powder steel (sintered) and laminated (SanMai) by Japanese Takefu Steel.
For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.
Intended use: Sports / Collection
Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Thick when closed: 18mm
Weight: 135g.
Closure: Liner Lock
Clip: in steel
Sheath: -
Packaging: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive version Collini Cutlery, Sprint Run, with Japanese stainless steel by Takefu Steel SPG2 Laminate.The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.CO-604-B -
Fox - Radius Carbon Fiber & Copper - Special Edition in SanMai SPG2 - CO-550CF - knife
With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine an innovative and award-winning model such as the Radius by Denis Simonutti, a Japanese steel from powders (sintered) and laminated (SanMai) by Takefu Steel.
For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.
Intended use: Sports / Collection
Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: Satin finish with mirror polished counter edge
Handle: Carbon fiber with HDL copper "Snake Skin" inserts
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 185mm.
Weight: 115g.
Closure: Fingers Safe Opening System
Clip: Titanium, billet, with Black PVD finish
Packaging: cardboard box, drawer, with Fox Knives logos - Leather sheath, hydroformed, for belt
Notes: Design by Denis Simonutti - Winner of the Blade Show 2019 in Atlanta as "Knife of the year" and "Imported knife of the year"The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.CO-550CF -
Fox - Radius Titanium Black PVD - Special Edition in SanMai SPG2 - CO-550TiB - knife
With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine an innovative and award-winning model such as the Radius by Denis Simonutti, a Japanese steel from powders (sintered) and laminated (SanMai) by Takefu Steel.
For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.
Intended use: Sports / Collection
Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: Satin finish with mirror polished counter edge
Handle: Titanium with Black PVD finish
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 185mm.
Weight: 140g.
Closure: Fingers Safe Opening System
Clip: Titanium, billet, with Black PVD finish
Packaging: cardboard box, drawer, with Fox Knives logos - Leather sheath, hydroformed, for belt
Notes: Design by Denis Simonutti - Winner of the Blade Show 2019 in Atlanta as "Knife of the year" and "Imported knife of the year"The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.CO-550TiB -
Fox - Radius Black G10 - Special Edition in SanMai SPG2 - CO-550G10B - knife
With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine an innovative and award-winning model such as the Radius by Denis Simonutti, a Japanese steel from powders (sintered) and laminated (SanMai) by Takefu Steel.
For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.
Intended use: Sports / Collection
Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: Satin finish with mirror polished counter edge
Handle: G10
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 185mm.
Weight: 106g.
Closure: Fingers Safe Opening System
Clip: In stainless steel, flush
Packaging: box with Fox Knives logos, Nylon sheath with zip
Notes: Design by Denis Simonutti - Winner of the Blade Show 2019 in Atlanta as "Knife of the year" and "Imported knife of the year"The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.CO-550G10B -
Fox - Suru by Vox - Sprint Run - SanMai SPG2 Powder Steel - FX-526SAN - knife
With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine a multi-award-winning model like the Suru with a Japanese powder steel (sintered) and laminate (SanMai) by Takefu Steel.
For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and durability of the sharpening, while simultaneously guaranteeing a remarkable resilience and resistance to oxidation. given by the lamination process of the blade.
Intended use: Sports / Collection
Type of production: Industrial
Country of production: Italy
Blade: in Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade treatment: Satin finish
Handle: Stonewashed aluminum
Blade length: 60mm.
Blade thickness: 4mm.
Length closed: 88m.
Total length: 148mm.
Thick when closed: 11mm
Weight: 84g.
Closure: Frame Lock with stainless steel door
Clip: flush, removable, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Opening via Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Aluminum version of the SURU Carbon Fiber model, winner of the 2018 Blade Show as "Overall Knife of the Year" - Exclusive version of Collini Cutlery, Sprint Run, with Takefu Steel SPG2 Laminate Japanese stainless steel.Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
- Longer tool life
thanks to the use of high quality steel with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the outer layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic rendering
The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.FX-526SAN -
Fox - Alaskan Hunter Folding by Russ Kommer - FX-622B - knife
Intended use: Hunting / Sports
Type of production: Industrial
Country of production: Italy
Blade: in Becut 57 / 58HRC stainless steel with very high resistance to oxidation and corrosion
Blade finish: Black Idroglider
Handle: G10
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 198mm.
Thick when closed: 10.3mm.
Weight: 129g.
Closing: Liner Lock
Clip: stainless steel, removable, with Black Idroglider finish
Packaging: Cardboard box with Fox logos
Notes: Design by Russ KommerFX-622B -
Fox - Radius by D. Simonucci - Limited Edition Damascus & Carbon Fiber - FX-550DCF - knife
Intended use: Collection
Type of production: Industrial
Country of production: Italy
Blade: Damasteel Gysinge DS93X damascus stainless steel
Blade treatment: -
Handle: Carbon fiber and Copper
Blade length: 75mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 185mm.
Weight: 115g.
Closing: Fingers Safe Opening System
Clip: Titanium machined from solid
Packaging: box with Fox Knives, pouch with leather zip, part of the damask steel advanced by the production of the blade
Notes: Limited edition made only in 15 numbered copies on knife and box - Design by Denis Simonucci - Winner of the 2019 Blade Show in Atlanta as "Knife of the year" and "Imported knife of the year"FX-550DCF