Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SPG2 61 / 62HRC
Blade treatment: -
Production Lama: Japan
Handle: Damascus steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: VG-10 stainless steel at 59 / 60HRC
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory



Use: Tactical / Military

Blade: Stainless steel 154CM 58/60 HRC with PVD treatment
Handle: Zytel
Blade length: 95 mm.
Blade thickness: 3 mm.
Total length: 220 mm.
Length closed: 125 mm.
Weight: 115 g.
Clip: stainless steel
Locking system: liner lock with additional safety lock

Extremely limited edition Platinum Label series folding knife with Mokume damascus blade and heads produced in only 20 examples each with a different coloration of the wood briar. Each specimen is therefore unique and differs from the previous one.

Intended use: collection

Type of production: industrial cutting - craftsmanship, assembly and finishing
Country of production: Seki - Japan
Blade: made of Mokume stainless steel with VG-10 cutting edge, forged with rainbow damascus rolling, achieved through layers of stainless steel, copper and brass and hammered through Tsuchime technique
Handle: made of Mokume stainless damask steel and wood briar
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 208g.
Closure: Liner Lock
Clip: handcrafted, removable and reversible, hammered stainless steel
Packaging: wooden box with Mcusta logos
Notes: Special and Limited Edition made in only 20 pieces for the Blade Show in Atlanta 2022

Knife withdrawn from a private collection in excellent condition, uniquely has a small imperfection on the wood at the base of the handle (visible in the close up of the photos) - Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.

The SHINRA MAXIMA series uses the sintered and cryogenically hardened Japanese steel SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Production Lama: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka Wood
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can visit the website: www.collinisteel.com

Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
Production Lama: Japan
Handle: Micarta
Blade length: 45mm.
Blade thickness: 3mm.
Closed length: 70mm.
Total length: 118mm.
Balancing: -
Weight: 44g.
Closure: Liner Lock
Clip: in deep pocket steel
Sheath:
Note: -

Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
Production Lama: Japan
Handle: Micarta
Blade length: 45mm.
Blade thickness: 3mm.
Closed length: 70mm.
Total length: 118mm.
Balancing: -
Weight: 44g.
Closure: Liner Lock
Clip: in deep pocket steel
Sheath:
Note: -

Extremely limited edition Yatagarasu MCUSTA folding knife of the Shinwa series, with Mokume blade and produced in only 100 pieces.

Yatagarasu, in Japanese culture, is a three-legged crow symbol of driving owned by the Sun goddess Amaterasu. Yatagarasu appears in ancient Japanese documents, such as Kojiki (古 事 記), in which it is also said that he fought and killed a beast intending to devour the Sun, and that he is also the protector of the emperor Jimmu.
On many occasions, in Japanese art this creature is represented with three legs, although in Kojiki it is never said that the Yatagarasu has more than two. Today, the three-legged version of the Yatagarasu is used as a symbol of the football federation of Japan.

Intended use: collection

Type of production: industrial cutting - craftsmanship, assembly and finishes
Lama production: Japan
Blade: stainless steel Mokume Damascus - Aogami (blue steel) forged with lamination of rainbow Damascus, obtained thanks to layers of stainless steel, copper and brass and with black hammering through the Tsuchime technique
Handle: in stainless damask with dark purple corian insert and copper and gold inlays
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 14mm.
Weight: 141g.
Closure: Liner Lock
Clip: -
Packaging: wooden box with Mcusta logos
Notes: limited edition 100 pieces

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Damascus
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 170g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 105g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

Intended use: dirty / collection

Type of production: industrial cut - assembly and handmade finishes
Blade: SPG2 61 / 62HRC
Blade treatment: -
Lama production: Japan
Handle: damask steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Iron Wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 167mm.
Balancing: -
Weight: 66g.
Closure: Liner Lock
Clip: -
Sheath: fabric bag
Note: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in damask laminated and hammered stainless steel with cutting edge in VG-10 at 59 / 60HRC
Handle: Stainless Steel
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 192mm.
Thick when closed: 8mm.
Weight: 114g.
Closure: Frame Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Iron Wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Corian
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 powder steel and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: stainless steel SPG-2 at 61 / 62HRC
Handle: Pakka Wood
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Packaging: cardboard box with Mcusta logos
Notes: cordura sheath and leather

Intended use: sporting/collection

Type of production: industrial cut - handcrafted assembling and finishing
Blade production: Japan
Blade: SPG-2 stainless steel at 61/62HRC in three layers San Mai laminate
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thickness when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Package: cardboard box with Mcusta logos
Notes: Cordura and leather sheath

Intended use: sports

Type of production: Industrial
Country of production: China
Blade: Stainless steel 7Cr17Mov
Blade treatment: Satin finish
Handle: Aluminum
Blade length: 74mm.
Blade thickness: 2.7mm.
Closed length: 98mm.
Total length: 169mm.
Weight: 115g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Gerber logos
Note: -

Important notice: due to Gerber's technical and packaging choices (painted aluminum instead of anodized and poorly protected knife in its packaging), we point out that these articles, although they are new from the factory and come from the manufacturer, already present small imperfections and abrasions that undermine aesthetic perfection. We therefore recommend the purchase only to concrete users and we advise against buying them instead from collectors.

Intended use: sports

Type of production: Industrial
Country of production: China
Blade: Stainless steel 7Cr17Mov
Blade treatment: Stonewashed
Handle: Stainless Steel and G10
Blade length: 97mm.
Blade thickness: 3.8mm.
Length closed: 119mm.
Total length: 216mm.
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with Gerber logos
Note: -

Intended use: sports

Type of production: Industrial
Country of production: China
Blade: Stainless steel 7Cr17Mov
Blade treatment: Stonewashed
Handle: Stainless Steel and Aluminum
Blade length: 97mm.
Blade thickness: 3.8mm.
Length closed: 119mm.
Total length: 216mm.
Weight: 150g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with Gerber logos
Note: -

Important notice: due to the technical and packaging choices of Gerber (painted aluminum instead of anodized and knife fixed with a plastic band in the cardboard box that physically "scrapes" the paint of the handle), we point out that these articles, although factory new and from the manufacturer, they already present small imperfections and abrasions that undermine their aesthetic perfection. We therefore recommend the purchase only to concrete users and we advise against buying them instead from collectors.

Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

Destination of use: sport / collection

Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -

Logan is not a common liner, but hides an epic revolution in the constructive concept!

Unlike traditional liners, Logan has no moving pins, but is born from a 5th titanium monolith. The accurate CNC milling machines produce Logan's body: solid, lightweight, slim and highly functional where the blade rotates on the pin, one With the base, to ensure a high strength and sturdiness. The retractable screws in the body give Logan the ultimate touch of clean elegance.

Purpose: Sportsman / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 Steel at 61HRC hardened vacuum
Blade treatment: beaded blast
Handle: Titanium monolithic 6AL4V and G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 205mm.
Closed thickness: 9mm.
Weight: 96g.
Opening: In one hand, with removable T-pin, on the back of the blade
Washers: Teflon
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: Upholstered zip pocket
Packing: Cardboard box with Mercury logos
Notes: Design by Moreno Franzin

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: stainless steel sanmai with sharp VG-10 to 59 / 60HRC and External cheeks damask nickel to 33 layers
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Mcusta - Sengoku VG10 knife - MC-0181 Oda Nobunaga - knife

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: Stainless Steel VG-10 to 59 / 60HRC
Handle: Black Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Mcusta - Sengoku Damascus knife - MC-0181D Oda Nobunaga - knife

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: stainless steel sanmai with sharp VG-10 to 59 / 60HRC and External cheeks damask nickel to 33 layers
Handle: Black Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Intended use: Sports / Collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: sanmai sharp stainless steel with VG-10 59 / 60HRC and External cheeks damask nickel to 33 layers
Blade treatment: -
Handle: Corian
Blade length: 87mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Overall length: 193mm.
Balancing: -
Weight: 98g.
Lock: Liner Lock
Clip: Steel
Sheath: -
Notes: -

Mcusta - Series Katana - MC-0041C - knife

Intended use: sports / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: laminated steel with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 194mm.
Thick when closed: 14mm.
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 powder steel and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: stainless steel SPG-2 at 61 / 62HRC
Handle: Pakka Wood
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Packaging: cardboard box with Mcusta logos
Notes: -

Mcusta - Basic Series Rosewood - MC-0014R - knife

Intended use: Sport

Type of production: Industrial
Production Lama: Japan
Blade: Stainless VG-10
Treatment Lama: Satin
Handle: Rosewood wood
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 15mm.
Balancing: -
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packing: brown cardboard box with logos Mcusta
Notes: -

Mcusta - Turo Take Dark Wood Money Clip MC-0151 Japan - knife

Intended use: sports / collection / money clip

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: AUS-8 stainless
Production Lama: Japan
Handle material: steel and ebony
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 76mm.
Overall length: 135mm.
Balancing: -
Weight: 34g.
Closure: Slip joint
Clip: present
Sheath: -
Notes: -

Mcusta - Susu-Take Money Clip MC-0152 Japan - knife

Intended use: sports / collection / money clip

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: AUS-8 stainless
Production Lama: Japan
Handle: Steel and Red pakkawood
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 76mm.
Overall length: 135mm.
Balancing: -
Weight: 34g.
Closure: Slip joint
Clip: present
Sheath: -
Notes: -

Mcusta - Tsuchi Green - MC-163D - knife

Type of production: industrial cutting - assembly and handcrafted finishes 

Production Lama: Japan
Blade: Damascus steel rolled and hammered with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -

Cutlery Collini is the official distributor for Italy of Japanese knives Mcusta

Intended use: sports / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60 HRC and cheeks outside Damascus nickel to 33 layers
Production Lama: Japan
Handle material: stainless steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip: -
Sheath: Belt, Nylon, with traditional motifs
Notes: -

Cutlery Collini is the official distributor for Italy of Japanese knives Mcusta

Intended use: sports / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60 HRC and cheeks outside Damascus nickel to 33 layers
Production Lama: Japan
Handle material: stainless steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip: -
Sheath: Belt, Nylon, with traditional motifs
Notes: -

Mcusta - Ao-Take Money Clip MC-0154 - knife

Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta

Intended Use: Sport / collection / money clip

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: steel AUS-8
Blade Production: Japan
Handle material: stainless steel and green micarta
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 76mm.
Overall length: 135mm.
Balancing: -
Weight: 34g.
Closure: Slip joint
Clip this
Sheath: -
Notes: -

Mcusta - Jazz Knife Damascus Cocobolo Ebony African MC-0171D - knife

Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta

Intended use: sporivo / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: VG-10 59/60HRC
Treatment Blade: -
Blade Production: Japan
Handle: wood cocobolo and ebony wood african with steel insert
Blade length: 80mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Overall length: 193mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip this
Sheath: Cordura
Notes: -

Coltelleria Collini is the official distributor for Italy of the Japanese MCUSTA knives

Intended use: dirty / collection

Type of production: industrial cut - assembly and handmade finishes
Blade: SPG2 61 / 62HRC
Blade treatment: -
Lama production: Japan
Handle: satin steel and wooden insert
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 168mm.
Balancing: -
Weight: 82g.
Closure: Liner Lock
Clip: present
Sheath: cordura
Note: -

Mcusta - Riple knife - MC-0142 - knife

Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta

Intended use: sporivo / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: VG-10 59/60HRC
Treatment Blade: -
Blade Production: Japan
Handle material: stainless steel satin and ebony inlay
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 96mm.
Overall length: 166mm.
Balancing: -
Weight: 86g.
Lock: Liner Lock
Clip: -
Sheath: Cordura
Notes: -

Mcusta - Mari Damascus Japan - MC-0036D - knife

Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle: damascus steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 84g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

Mcusta - Gentleman Folder Damascus Japan - MC-0052D - knife

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle material: G10
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 167mm.
Balancing: -
Weight: 66g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Handle: cocobolo wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in damask laminated and hammered stainless steel with cutting edge in VG-10 at 59 / 60HRC
Handle: Stainless Steel
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 192mm.
Thick when closed: 8mm.
Weight: 114g.
Closure: Frame Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade Production: Japan
Blade: damascus steel laminate and hammered with sharp VG-10 to 59/60HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade Production: Japan
Blade: damascus steel laminate and hammered with sharp VG-10 to 59/60HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -

Mcusta - Gentleman Folder Damascus Japan - MCU79D - knife

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Pakkawood wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 167mm.
Balancing: -
Weight: 66g.
Closure: Liner Lock
Clip: -
Sheath: fabric bag
Note: -

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: hammered steel
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 160mm.
Balancing: -
Weight: 74g.
Closure: Liner Lock
Clip: -
Sheath: -
Note: -

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle material: wood
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Total length: 167mm.
Balance: -
Weight: 66g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection / gentlemen

Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Iron Wood
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 164mm.
Balancing: -
Weight: 58g.
Closure: Liner Lock
Clip: -
Sheath: in fabric
Note: -

Intended use: Tactical / Military

Blade: stainless steel 420HC
Production Lama USA
Handle: Zytel
Blade length: 115mm.
Blade Thickness: 3.5mm.
Closed Length: 142mm.
Overall length: 255mm.
Balancing: -
Weight: 172g.
Lock: Liner Lock
Clip: -
Sheath: Cordura
Notes: Based on the dagger designed by William Fairbairn and Rex Applegate

Intended use: Tactical / Military

Blade: 420HC stainless steel
Lama production: USA
Handle: Zytel
Blade length: 115mm.
Blade thickness: 3.5mm.
Length closed: 142mm.
Total length: 255mm.
Balancing: -
Weight: 172g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -