Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Fascinating knife used by the Japanese farmer "Higonokami kanekoma."

As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.

The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.

Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.

NANO is the latest knife from the hi-tech family, an ideal partner for everyday activities.

The blade is made of CPM MagnaCut steel with satin finish equipped with "ReF" (Removable Flipper system) applied on the new minimal lever, Double Crown ball bearing system and Solida titanium clip.

The titanium frame locking bar is reinforced with a hardened steel insert so that the titanium part will not be worn out by the rotation of the blade over time.
The clip, CNC-milled from a single piece of titanium, is reversible so it can be attached on the opposite side for left-handed users.

The removable Flipper system allows the user to decide whether the blade should have the trigger or not, which can be installed as needed or removed and replaced with the second "cap" screw.


Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 62/63HRC
Blade treatment: satin finish
Handle: Titanium 6Al4V and Forged Carbon Fiber
Blade length: 65mm.
Blade thickness: 3.8mm.
Total length: 162mm.
Weight: 97g.
Closure: Frame Lock 
Clip: Titanium billet, removable and reversible
Packaging: Cardboard box with LionSteel logos
Notes: Carson Flipper opening system (removable) on ball bearings

lionSTEEL-Emerson ONE is the new SOLID® Karambit knife developed in collaboration with Emerson Design.

The Solid frame-lock handle, already a distinguishing feature of lionSTEEL, is machined from a solid piece of Ergal aluminum, while the blade is made of CPM MagnaCut steel.

Other built-in features make the knife more comfortable and safer to use, allowing the end user to choose how to use it:

* REF (REmovable Flipper system): this feature allows you to choose how to use the knife, if you don't want the flipper you can unscrew it and remove it using the torx tool and insert the second "cap" screw that fits perfectly into the hole at the bottom of the blade.

* Wave: Ernest Emerson's patented system that allows the blade to catch on the pocket of the pants, on extraction, allowing it to open automatically with the right motion.

Intended Use: Sporting/Tactical

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade Finish: Chemical Black
Handle: Aluminum, Solid, billet machined
Blade Length: 82mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 134g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Emerson Wave opening system - Removable Carson Flipper opening system - Ball bearing opening movement - Design by Ernst Emerson

lionSTEEL-Emerson ONE is the new SOLID® Karambit knife developed in collaboration with Emerson Design.

The Solid frame-lock handle, already a distinguishing feature of lionSTEEL, is machined from a solid piece of Ergal aluminum, while the blade is made of CPM MagnaCut steel.

Other built-in features make the knife more comfortable and safer to use, allowing the end user to choose how to use it:

* REF (REmovable Flipper system): this feature allows you to choose how to use the knife, if you don't want the flipper you can unscrew it and remove it using the torx tool and insert the second "cap" screw that fits perfectly into the hole at the bottom of the blade.

* Wave: Ernest Emerson's patented system that allows the blade to catch on the pocket of the pants, on extraction, allowing it to open automatically with the right motion.

Intended Use: Sporting/Tactical

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade Finish: Stonewashed
Handle: Aluminum, Solid, billet machined
Blade Length: 82mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 134g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Emerson Wave opening system - Removable Carson Flipper opening system - Ball bearing opening movement - Design by Ernst Emerson

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Sleipner 60 / 61HRC steel
Blade treatment: Satin
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 180mm.
Thick when closed: 8.5mm.
Weight: 128g.
Closing: Frame Lock with steel swing and Rotoblock safety system
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Sleipner 60 / 61HRC steel
Blade treatment: Black DLC
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 180mm.
Thick when closed: 8.5mm.
Weight: 128g.
Closing: Frame Lock with steel swing and Rotoblock safety system
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings

ROK, which is part of the SOLID knives family made from a single piece of aluminum or titanium, has two important innovations:

* the introduction of the new H.WAYL System; it is a LionSteel patent that allows the clip to disappear inside the handle when using the knife. The clip can appear only when needed.

* the introduction of NFC technology into the knife box. With this system the user no longer has to look for the information on the product, but it is the knife itself that makes them available: indications for maintenance, in-depth information on the production process, or more general information about LionSteel.

As was already the case with the TRE model, the user has the possibility to remove the pinball machine, opting for a more traditional two-handed blade opening. Also on the ROK there is the Rotoblock safety system and a steel tip on the end of the blade locking bar: in this way it is possible to prevent breakage or wear caused by the blade itself.

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 59 / 60HRC
Blade treatment: Satin
Handle: Aluminum
Blade length: 86mm.
Blade thickness: 4.5mm.
Total length: 198mm.
Thickness when closed: -mm.
Weight: 130g.
Closing: Frame Lock with steel swing and Rotoblock safety system
Clip: concealed, made from solid
Packaging: cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings - possibility to remove the pinball system guard

Intended use: Sportsman / Tactical

Type of production: Industrial
Country of production: Italy
Blade: D2 steel
Blade Treatment: Satin
Handle: Steel folding and G10 handles
Blade Length: 94mm.
Blade thickness: 3.5mm.
Closed length: 124mm.
Total length: 218mm.
Weight: 128g.
Closure: TOL - Tactical Operation Lock
Clip: stainless steel
Packing: cardboard box with Lion Steel logos
Notes: Movement on Steel Ball Bearings IKBS - Tungsten Carbide Glass Breaker - Design by Max - Massimo Salice Sanna

Intended use: Sportsman / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Steel Sleipner 60 / 61HRC
Blade treatment: Black PVD
Handle: Aluminum
Blade Length: 94mm.
Blade thickness: 4.5mm.
Overall length: 211mm.
Closed thickness: 9mm.
Weight: 146g.
Closure: Frame Lock with Steel Swing and Rotoblock Security System
Clip: Removable and reversible, stainless steel
Packing: Cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings

Intended use: Sportsman / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Steel Sleipner 60 / 61HRC
Blade treatment: Satin
Manicure: Aluminum
Blade Length: 94mm.
Blade thickness: 4.5mm.
Overall length: 211mm.
Closed thickness: 9mm.
Weight: 146g.
Closure: Frame Lock with Steel Swing and Rotoblock Security System
Clip: Removable and reversible, stainless steel
Packing: Cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings

Intended use: Sports / EDC

Type of production: Industrial
Production Country: Italy
Blade: Stainless Sleipner 60 / 61HRC
Blade treatment: Stone Washed
Handle: Stainless Steel and Black G10, titanium spacers
Blade length: 87mm.
Blade thickness: 4.5mm.
Overall length: 210mm.
Weight: 160g.
Lock: Liner Lock
Clip: -
Packaging: Cardboard box with Lion Steel logos
Notes: Design by Peg - Carson Flipper opening system - opening on ball bearings IKBS

Intended Use: Sport / Collection

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Sleipner 60/61HRC
Treatment Blade: Black TiNi
Handle material: carbon fiber SOLID
Blade length: 90mm.
Blade thickness: 4.5mm.
Overall length: 205mm.
Balancing: -
Weight: 120g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: Leather pouch
Packaging: cardboard with Lion Steel logos
Notes: Design by Molletta

Intended Use: Sport / Collection

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Sleipner 60/61HRC
Treatment Blade: Black TiNi
Handle: micarta SOLID
Blade length: 90mm.
Blade thickness: 4.5mm.
Overall length: 205mm.
Balancing: -
Weight: 130g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard
Notes: design by Molletta

Intended Use: Sport / Hunting / Gentleman

Type of production: Industrial
Production Blade: Italy
Blade: D2 steel
Treatment Blade: -
Handle: G10
Blade length: 88mm.
Blade thickness: 3mm.
Closed Length: 120mm.
Overall length: 210mm.
Thick when closed: 14mm.
Balancing: -
Weight: 120g.
Closure: Back Lock
Clip: -
Packaging: cardboard box with logos Lion Steel
Notes: Design by Max

Intended Use: Sport / Collection

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Sleipner 60/61HRC
Treatment Blade: -
Handle material: carbon fiber SOLID
Blade length: 90mm.
Blade thickness: 4.5mm.
Overall length: 205mm.
Balancing: -
Weight: 120g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: Leather pouch
Packaging: cardboard with Lion Steel logos
Notes: Design by Molletta

Intended Use: Sport / Collection

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Sleipner 60/61HRC
Treatment Blade: -
Handle: micarta SOLID
Blade length: 90mm.
Blade thickness: 4.5mm.
Overall length: 205mm.
Balancing: -
Weight: 130g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard
Notes: design by Molletta

Intended Use: Sport / Tactical

Type of production: Semi-Industrial
Production Blade: Italy
Blade: Stainless Sleipner 60/61HRC
Treatment Blade: Black
Handle: 7075 piece
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 180mm.
Thick when closed: 9mm.
Balance: -
Weight: 140g.
Closure: Frame Lock with security system Rotoblock
Clip: removable and reversible, stainless steel
Sheath: -
Packaging: cardboard box with logos Lion Steel
Notes: Design by Peg

Destinazione d'uso: Sportivo / Tattico

Tipo di produzione: Semi-Industriale
Produzione Lama: Italia
Lama: In acciaio Sleipner 60/61HRC
Trattamento Lama: -
Manicatura: Ergal 7075 monoblocco
Lunghezza lama: 75mm.
Spessore lama: 4mm.
Lunghezza totale: 180mm.
Spessore da chiuso: 9mm.
Bilanciatura: -
Peso: 140g.
Chiusura: Frame Lock con sistema di sicurezza Rotoblock
Clip: amovibile e reversibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Lion Steel
Note: Design by Molletta

Destinazione d'uso: Sportivo

Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio D2
Trattamento Lama: -
Manicatura: G-10
Lunghezza lama: 73mm.
Spessore lama: 3mm.
Lunghezza chiuso: 100mm.
Lunghezza totale: 175mm.
Spessore da chiuso: 12mm.
Bilanciatura: -
Peso: 80g.
Chiusura: Back Lock
Clip: Amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Lion Steel
Note: Design by Max Salice Sanna

Intended Use: Sport / Tactical

Type of production: Semi-Industrial
Production Blade: Italy
Blade: D2 steel 59HRC
Treatment Lama: -
Handle: 7075 piece
Blade length: 95mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Thick when closed: 9mm.
Balance: -
Weight: 155g.
Closure: Frame Lock with security system Rotoblock
Clip: -
Sheath: -
Packaging: cardboard box with logos Lion Steel
Notes: Winner of the Blade Award 2010 for Most Innovative Knife of the Year - Design by Peg - and stripper clips sold separately