Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No since 2014
* Sharpening: Original
* Marks on blade: No
* Marks on handle: No
* Box: NOT present
* Checked and certified by our internal laboratory

Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim Vagner

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

* Type: Previously purchased and used. 
* Condition: Very good condition, with a few small marks on blade and handle.
* Commercially available: Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small, unnoticeable scratches on the tip of the blade.
* Marks on handle: A small mark near the clip housing.
* Packaging: Yes
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Production Type: Industrial
Country of Production: China (by Reate Knives)
Blade: Elmax stainless steel
Blade finish: satin finish
Handle: green cavnas micarta with brass spacer
Blade length: 87mm.
Blade thickness: 3.5mm.
Length closed: 114mm
Total length: 203mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: cardboard box with Giant Mouse logos
Notes: discontinued knife, winner of the "2023 BEST EDC CHAMPION" award by Carryology

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratory

Intended use: Regional

Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: some minor scuffs and hairlines on the right side
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Collection

Production type: MidTech
Country of manufacture: USA
Blade: stainless rolled damascus with wave design, 45-ply and ZDP-189 cutting edge
Blade finish: -
Handle: titanium with blue anodized and topaz set
Blade length: 79mm.
Blade thickness: 2.3mm.
Length closed: 100mm.
Total length: 180mm.
Weight: 57g.
Closure: Button Lock with embedded topaz
Sheath: leather, with stainless steel clip
Packaging: cardboard box with William Henry logos and warranty certificate
Notes: previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1990 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade; artisan passed away in 2013
* Sharpening: Factory sharpening, can be improved.
* Marks on blade: A few small oxidation marks on handle.
* Marks on handle: A few small marks on steel bolsters due to time.
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks from time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: USA
Blade: full tang, handcrafted carbon damascus steel
Handle: stainless steel heads and giraffe bone handles
Blade length: 104mm
Blade thickness: 3mm.
Total length: 196mm.
Weight: 94g.
Sheath: Leather, for belt or boot, with steel clip for attachment
Packaging: -
Notes: rare handcrafted knife made in 1990 by well-known American knife maker Tommy Lee

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 03/1990 model, in like-new condition
* Commercially available: Unique knife, entirely custom made and hand-engraved
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house workshop

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: Germany
Blade: stainless steel CPM-T440V at 60HRC
Blade finish: mirror polish
Handle: integral from solid, fully hand-engraved, with fossil ivory grips and red micarta spacers
Blade length: 93mm
Blade thickness: 4mm.
Total length: 203mm.
Weight: 99g.
Sheath: Leather
Packaging: -
Notes: rare handcrafted knife made in March 1990 by well-known German knifemaker Peter Herbs, a member of the German Knifemakers' Guild and a member of the very prestigious American Knifemakers' Guild.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 12/1990 model, overall in good condition, with a few small marks from time
* Commercially available: Limited edition, numbered model, made entirely by hand; craftsman passed away in 2009
* Sharpening: Re-sharpened, a few small marks on blade due to sharpening
* Marks on blade: A few small marks
* Marks on handle: A few hairlines on the bolsters and a small dent on the left micarta handle.
* Box: -
* Scabbard: Suede leather case.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house laboratory

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: USA
Blade: stainless steel ATS34
Blade finish: satin finish
Handle: Stainless steel and Micarta
Blade length: 83mm
Blade thickness: 2.5mm.
Length closed: 108mm.
Total length: 189mm.
Thickness when closed: 8mm.
Weight: 99g.
Closure: Back Lock
Clip: -
Sheath: Suede leather pouch
Packaging: -
Notes: rare handcrafted knife made in December 1990 by noted U.S. knife maker Frank Centofante who passed away in 2009, serial number #049

Type: Previously Purchased
Condition: in excellent condition
Available in the market, currently in production
Sharpening: Factory standard
Blade marks: None
Handle marks: None
Box: Present
Sheath: Not applicable
Manuals, Certificates, and Warranties: ER
Checked and Certified by our internal laboratory
Intended use: Tactical/Emergency

Type of production: Industrial
Blade Production: Italy
Blade: N690Co stainless steel, 58HRC
Blade Treatment: Testudo
Handle: Anticorodal
Blade length: 95mm
Blade thickness: 4mm
Closed length: 134mm
Total length: 225mm
Closed thickness: 24mm
Balance: Not applicable
Weight: 162g
Closure: Liner Lock
Clip: Stainless Steel
Sheath: Not applicable
Packaging: black cardboard box with Extrema Ratio logos
Notes: seat belt cutter, glass breaker, screwdriver for optics

After the France, Amour and Escapade editions, discover the Nature edition!

An edition highlighting the work of three artists committed to the organic, vegetable, or animal dimension.

Perrine Honoré, a French illustrator and muralist, has decided to explore a synthetic, colorful, and naive language somewhere between the abstract and the figurative. Different natural elements appear on the handle of the knife so that everyone can interpret them in their own way. 

The knife has an 8.5-cm stainless steel blade, and the handle is decorated with the sublimation technique.

Intended Use: Collection

Type of production: Industrial
Country of manufacture: France
Blade: 12C27 stainless steel
Blade finish: satin-finished
Handle: wooden, with 3D sublimation decoration
Blade length: 80mm.
Blade thickness: 1.5mm.
Length closed: 107mm.
Total length: 190mm.
Weight: 42g.
Closure: Viro-Block
Packaging: Cardboard box with Opinel logos

After the France, Amour and Escapade editions, discover the Nature edition!

An edition highlighting the work of three artists committed to the organic, vegetable, or animal dimension.

Discover pocket knife N°08 by Rommy González, a Chilean artist who decided to highlight mycelium and the fungi it produces. Her drawings were transcribed on the knife's fascinating handle using the sublimation method. The 8.5-cm blade is made of stainless steel.

Intended Use: Collection

Type of production: Industrial
Country of manufacture: France
Blade: 12C27 stainless steel
Blade finish: satin-finished
Handle: wooden, with 3D sublimation decoration
Blade length: 80mm.
Blade thickness: 1.5mm.
Length closed: 107mm.
Total length: 190mm.
Weight: 42g.
Closure: Viro-Block
Packaging: Cardboard box with Opinel logos

Type: Previously purchased and used
Condition: In excellent condition
Availability: Available for purchase
Sharpening: Resharpened
Blade marks: NO
Handle marks: small marks on the clip
Box: Original and present, made of cardboard
Sheath: Not included
Manuals, Certificates, and Warranties: Included
Inspected and Certified by our internal laboratory
Usage: Sports/Collection

Type of production: Industrial
Country of production: Italy
Blade: Bohler M390 steel 60/61HRC
Blade finish: Bead blasted and matt
Handle: Carbon Fiber and Titanium
Blade length: 74mm
Blade thickness: 3.5mm
Total length: 175mm
Weight: 62g
Lock: Titanium Frame Lock with steel stopper
Clip: 6Al4V Titanium
Packaging: Cardboard box with LionSteel logos
Notes: IKBS ball-bearing opening with Carson flipper system

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased and Used
Conditions: In excellent conditions
Available in the market: Out of production since 2010
Sharpening: Factory
Marks on blade: NO
Marks on handle: NO
Box: Present
Sheath: -
Manuals, Certificates, and Warranties: No
Checked and Certified by our internal laboratory
Intended use: Sport / Collection

Type of production: Industrial
Blade Production: USA
Blade: In CPM-S30V stainless steel
Blade finish: Satin
Handle: G10
Blade Length: 87mm.
Blade Thickness: 3.5mm.
Closed Length: 122mm.
Total Length: 210mm.
Weight: 110g.
Closure: Compression Lock
Clip: Painted stainless steel
Packaging: Cardboard box with Spyderco logos
Notes:

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Condition: in excellent condition
Available in commerce: NO
Sharpening: Original
Marks on blade: YES - small marks
Marks on handle: NO
Packaging: YES, original box
Checked and Certified by our internal laboratory
Intended use: Tactical/Military

Type of production: Industrial
Country of production: USA
Blade: In stainless steel 154CM
Blade finish: Tungsten DLC Coating
Handle: G10 with stainless steel liners
Blade length: 101mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 222mm.
Thickness when closed: 21mm.
Weight: 225g.
Closure: Liner Lock
Clip: Removable, reversible and multi-position, in stainless steel
Packaging: -
Notes: Design by Ken Onion - Opening system through Carson Flipper system - Knife out of production, withdrawn from private collection, like new, without box

The Opinel N°10 with Corkscrew and Cap Lifter is a special variant of the famous Opinel N°10 knife, featuring a versatile blade and a beech wood handle. This additional version is designed to offer extra functionality.

The blade of the Opinel N°10 is made of high-quality stainless steel, which offers good durability and corrosion resistance. The clip-point shape of the blade makes it ideal for multiple uses, such as cutting, peeling or slicing.

In addition to the blade, this model has two additional tools built into the 'handle. The corkscrew is a curly metal protrusion that can be used to easily remove corks from wine bottles, making the knife also suitable for food and wine-related activities. The bottle opener, on the other hand, is a tool for opening glass bottles with crown corks, allowing drinks to be opened quickly and easily.

The handle of the Opinel No. 10 is made of wood, typically beech, which provides an excellent grip and a traditional look. It features Opinel's classic Virobloc locking system, which allows the blade to be securely locked in the open or closed position, improving safety during use and transport.

Type of production: industrial
Country of manufacture: France
Blade: stainless steel
Handle: beech wood
Blade length: 100mm.
Corkscrew length: 65mm.
Blade thickness: 2mm.
Length when closed: 130mm.
Thickness when closed: 24mm.
Total length: 230mm.
Weight: 62g.
Closure: Virobloc

The N°08 Savoyard puts the accent on the cradle of Opinel: the mountains of Savoy! 

The beechwood handle is lacquered and decorated with the Savoyard coat of arms. At the end of the handle is a red drawstring for easy carrying. The blade is made of stainless steel and the knife has a Viroblock safety ring.


Type of production: industrial
Country of manufacture: France
Blade: stainless steel Sandvik 12C27
Handle: made of Beech wood with pad printing and red strap
Blade length: 80mm.
Blade thickness: 1.6mm.
Length closed: 110mm.
Thickness closed: 20mm.
Total length: 195mm.
Weight: 60g.
Locking system: Virobloc both when open and closed
Notes: special edition 2023

Intended Use: Hiking / Sporting

Type of production: Industrial
Country of Production: France
Blade: Sandvik 12C27 stainless steel
Blade finish: Satin finish
Handle: Non-slip polymer and FRN
Blade length: 100mm.
Blade thickness: 2.7mm.
Length closed: 160mm.
Total length: 260mm.
Weight: 150g.
Closure: Virobloc
Packaging: Cardboard box with Opinel logos
Notes: 110db emergency whistle - Belt cutter - Tick remover tool

Intended Use: Hiking / Sporting

Type of production: Industrial
Country of Production: France
Blade: Sandvik 12C27 stainless steel
Blade finish: Satin finish
Handle: Non-slip polymer and FRN
Blade length: 100mm.
Blade thickness: 2.7mm.
Length closed: 160mm.
Total length: 260mm.
Weight: 150g.
Closure: Virobloc
Packaging: Cardboard box with Opinel logos
Notes: 110db emergency whistle - Belt cutter - Tick remover tool

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight: a few small scratches and abrasions on corners and clip; small oxidation marks on hardware
* Box: Present and original (full set).
* Scabbard: -
* Manuals, Certificates and Warranties: Present (full set)
* Checked and Certified by our in-house laboratory



Tactical knife/EDC produced in the late 1990s and designed by martial arts expert James Keating,

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.

Intended Use: Tactical/Collection
Production Type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM 
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 75mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 13mm
Weight: 90g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Master of Defense logos

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On order
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Packaging: Zip pouch, original
* Scabbard: Leather, pocket size, original
* Manuals, Certificates and Warranties: Certificate of guarantee and authenticity present.
* Checked and Certified by our in-house laboratory

Intended use: sports/collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel M390 60/61HRC
Blade finish: satin finish
Handle: titanium
Blade length: 176mm.
Blade thickness: 2.5mm.
Length closed: 99mm.
Total length: 175mm.
Weight: 64g.
Closure: Frame Lock
Clip: removable, titanium
Scabbard: Leather pouch
Packaging: Zip pouch and certificate of authenticity and warranty 
Notes: Designed and made entirely by hand in Italy by Franco "Frank" Bonassi, Decemnre 2019 example with serial number T27 - Previously purchased, from private collection

The World Ski Championships will take place this year in Savoie, Courchevel and Méribel. It was therefore an obvious choice for the brand to join the event and present a unique limited edition knife.

The N°08 Courchevel Méribel 2023 has an 8.5 cm stainless steel blade, a Virobloc safety ring and a beech handle. The latter is decorated by pad printing with the official graphics of the event.

An unmissable memory of this winter that combines know-how and passion for the mountains!

Intended use: Sport / Collection

Type of production: Industrial
Lama production: France
Blade: Sandvik 12C27 stainless steel
Blade treatment: satin
Handle: Wood
Blade length: 82mm.
Blade thickness: 1.5mm.
Closed length: 108mm.
Total length: 190mm.
Closed thickness: 20mm.
Balancing: -
Weight: 58g.
Closure: Virobloc
Clips: -
Scabbard: -
Packaging: Cardboard box with Opinel logos
Note:

Picnic + accessories will soon become indispensable for your nomadic meals!

Created in collaboration with designer Franck Fontana, the kit consists of:

- a microfiber napkin case for storing and cleaning items
- two inserts, a fork and a spoon, which are fixed on the handle of a N ° 08 knife (not included in the package)

The inserts are made of stainless steel, to ensure comfort in the mouth, hygiene and sturdiness (compatible with No. 08 wooden handles with the double Virobloc safety device, on sale since 2000).

To attach the fork or spoon:

- with the knife blade in the closed position, open the ring nut
- fix the fork or spoon at the level of the ring in the small interstices
- close the ring

Compact and lightweight, this easily transportable kit is made in France and replaces disposable cutlery.

Tools to eat comfortably in the office or outdoors!
Designed in collaboration with designer Franck Fontana, the Picnic + set brings together smart and durable accessories for nomadic and comfortable meals.

It is equipped with:
- a N ° 08 knife
- two inserts, a fork and a spoon, which are fixed to the handle of the N ° 08
- a microfiber napkin case for storing and cleaning items

The inserts are made of stainless steel, to ensure comfort in the mouth, hygiene and sturdiness (compatible with No. 08 wooden handles with the double Virobloc safety device, on sale since 2000).

The fork and spoon are compatible with traditional N ° 08 knives with wooden handle and double safety ring marketed since 2000.

The Arc de Triomphe, Mont Ventoux, the best climber motif, rain, fog: the knife's beechwood handle is decorated with pad printing in yellow and black. This graphic collaboration with Manovelle (Matthieu Lifschitz) pays homage to the iconic Tour de France motifs!

The blade is made of Sandvik 12C27M stainless steel and measures 8.5 cm. The double safety ring allows the blade to be locked in the open and closed position. The yellow leather strap at the end of the handle is a nod to the symbolic color of the Tour de France. Delivered in kraft carton with Tour de France sticker.

Type of production: industrial
Country of production: France
Blade: stainless steel Sandvik 12C27
Handle: made of Beech wood with black and yellow pad printing
Blade length: 80mm.
Blade thickness: 1.6mm.
Length closed: 110mm.
Thickness closed: 20mm.
Total length: 195mm.
Weight: 60g.
Locking system: Virobloc both when open and closed
Notes: special limited edition to celebrate the Tour de France 2022

Knife from private collection - Vintage model (presumably early 90's) from Maison Coutellerie Thiers - In very good condition, never used for cutting, still shows some small signs of wear due to past time - Supplied with original leather sheath, with some small signs of wear - Checked and certified by our in-house laboratory.

Intended Use: Collection/Sportsman

Type of manufacture: Industrial
Country of Production: France
Blade: Stainless steel Z70CD15 (440A)
Blade finish: satin-finished
Handle: stainless steel and dark green stamina wood
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 175mm.
Weight: 95g.
Closure: Back Lock
Clip: not present
Sheath: leather, with belt loop
Notes: knife from private collection in excellent condition

With a stainless steel blade with a polyglass finish, this knife offers exceptional cutting and ease of maintenance. The shape of the handle developed by Opinel guarantees the user an ideal grip. Always equipped with its Virobloc safety ring, the N ° 08 guarantees good reliability. Padouk is highly resistant to moisture.

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: France
Blade: Sandvik 12C27 stainless steel
Blade treatment: mirror
Handle: Padouk wood
Blade length: 82mm.
Blade thickness: 1.5mm.
Closed length: 108mm.
Total length: 190mm.
Thick when closed: 20mm.
Balancing: -
Weight: 58g.
Closing: Virobloc
Clip: -
Sheath: -
Packaging: Cardboard box with Opinel logos and black case
Note:

Opinel - Les Effilés ash wood - 10 in stainless steel - knife

Ranked # 10
Type of production: industrial
Lama production: France
Blade: stainless steel
Handle: in beech wood
Blade length: 95mm.
Blade thickness: 2mm.
Length closed: 146mm.
Thick when closed: 125mm.
Total length: 225mm.
Weight: 44g.
Closing: viro block

Since 1890, in a pocket, backpack, kitchen drawer or on the table, Opinel has been synonymous with a nomadic art of living, natural spirit, moments of sharing and complicity.

Opinel - No. 07 Chestnuts, garlic and pitting

A knife for nature-loving foodies!

This pocket knife is used for cutting and peeling chestnuts, as well as peeling garlic or quickly removing stones and pits from fruit by making an incision. It is ideal for preparing jams and tarts Its small size means it fits easily into your pocket and its short, pointed and curved 4 cm blade is easier to handle than a long blade. Perfect as a useful and practical gift idea. This knife can be personalised.

Blade length :4 cm Stainless steel We use Sandvik 12C27 modified stainless steel. It is anti-corrosive thanks to the addition of chrome and requires no special maintenance. Its carbon content of at least 0.40% gives excellent cutting edge.

Blade hardness 57-58 HRC Safety ring Invented by Marcel Opinel in 1955, the Virobloc safety ring is fitted to all folding knives from the N° 06. Cut out of stainless steel, the Virobloc has two sections, one fixed and one sliding. In addition to locking the blade open (safety in use), it is now possible to lock the blade closed (safety in transport).

Intended use: Sports / Collection

Type of production: Industrial
Lama production: France
Blade: Sandvik 12C27 stainless steel
Blade treatment: mirror polished
Handle: Beli wood
Blade length: 82mm.
Blade thickness: 1.5mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 20mm.
Balancing: -
Weight: 58g.
Closing: Virobloc
Clip: -
Sheath: -
Packaging: Cardboard box with Opinel logos and black case
Notes: Limited edition 3500 pieces, not numbered

Intended use: Sports / Collection

Type of production: Industrial
Lama production: France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Satin
Handle: Red laminated birch wood
Blade length: 82mm.
Blade thickness: 2mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 20mm.
Balancing: -
Weight: 44g.
Closing: Virobloc
Clip: -
Sheath: -
Packaging: Cardboard box with Opinel logos
Note:

Intended use: Sports / Collection

Type of production: Industrial
Lama production: France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Satin
Handle: Brown laminated birch wood
Blade length: 82mm.
Blade thickness: 2mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 20mm.
Balancing: -
Weight: 44g.
Closing: Virobloc
Clip: -
Sheath: -
Packaging: Cardboard box with Opinel logos
Note:

From the famous French company Opinel, a fold has now become a timeless classic.

Blade: Sandvik stainless steel (carbon content 0.4%).
Handle: in beech wood
Locking system: exclusive Virobloc system to lock the blade in closing and opening.

No.8
- Blade length: 8cm
- Total length: 19cm
- Weight: 44 gr.
- Special edition 2018 with handle engraved in pyrography
- Series composed of 3 different subjects (Trekking, Ski and Mountain Bike)

The N ° 08 of the special series Black is equipped with a blade and a virobloc® in stainless steel with a burnishing surface treatment that strengthens the corrosion resistance. The handle is in oak from the French forests

Intended use: Sports / Collection

Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade treatment: burnishing
Handle: French Oak wood
Blade length: 80mm.
Blade thickness: 1.5mm.
Length closed: 107mm.
Total length: 190mm.
Weight: 42g.
Closure: Viro-Block
Packaging: Wooden box with Opinel logos

Opinel is a French company founded by the Opinel family based in Saint-Jean-de-Maurienne, which since 1890 produces and distributes quality knives.
The structure of the Opinel knife is simple, with a steel or carbon blade and the stabilized wooden handle, covered with a special protective paint.
Opinel knives are lightweight, easy-to-handle and affordable, and are therefore among the best-selling in the world.

N.15

Type of production: industrial
Blade production: France
Blade: stainless steel
Manicure: in walnut wood
Blade Length: 150mm.
Blade thickness: 1.4mm.
Closed length: 175mm.
Closed thickness: 21.5mm.
Total length: 320mm.
Weight: 56g.
Closure: viro block

Opinel is a French company founded by the Opinel family based in Saint-Jean-de-Maurienne, which since 1890 produces and distributes quality knives.
The structure of the Opinel knife is simple, with a steel or carbon blade and the stabilized wooden handle, covered with a special protective paint.
Opinel knives are lightweight, easy-to-handle and affordable, and are therefore among the best-selling in the world.

N.08
Type of production: industrial
Blade production: France
Blade: stainless steel
Manicure: in walnut wood
Blade Length: 80mm.
Blade thickness: 1.2mm.
Closed length: 105mm.
Closed thickness: 17.5mm.
Overall length: 181mm.
Weight: 24g.
Closure: viro block

Destination of use: Hiking

Type of production: Industrial
Country of production: France
Blade: Stainless Steel Sandvik 12C27
Blade treatment: satin finish
Manicure: polymers with non-slip inserts
Blade Length: 75mm.
Blade thickness: 2mm.
Closed length: 103mm.
Total Length: 179mm.
Closed thickness: 18mm.
Weight: 48g.
Closure: Virobloc
Packing: Cardboard box with Opinel logos
Notes: Rounded Tip - 100db Emergency Whistle

Destination of use: Hiking

Type of production: Industrial
Country of production: France
Blade: Stainless Steel Sandvik 12C27
Blade treatment: satin finish
Manicure: polymers with non-slip inserts
Blade Length: 75mm.
Blade thickness: 2mm.
Closed length: 103mm.
Total Length: 179mm.
Closed thickness: 18mm.
Weight: 48g.
Closure: Virobloc
Packing: Cardboard box with Opinel logos
Notes: Rounded Tip - 100db Emergency Whistle

Opinel - 7 - stainless steel blade - knife

From the famous French company Opinel, a folding has become a timeless classic.
Sandvik stainless steel blade (carbon content 0.4%).
Handle of beech wood.
Exclusive Virobloc system to lock the blade in the closing and opening.

Ranked # 8
- Blade 7.5 cm, total length 17.5 cm
- Weight: 38 gr.

intended use: sports / collection

type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Treatment Blade: satin
manicatura: wood
Blade length: 80mm.
blade thickness: 1.5mm.
closed length: 107mm.
Total length: 190mm.
Weight: 42g.
Lock system: Viro-Block
Package: cardboard box with logos Opinel

intended use: sports / collection

type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Treatment Blade: satin
manicatura: wood
Blade length: 80mm.
blade thickness: 1.5mm.
closed length: 107mm.
Total length: 190mm.
Weight: 42g.
Lock system: Viro-Block
Package: cardboard box with logos Opinel

intended use: sports / collection

type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Treatment Blade: satin
manicatura: wood
Blade length: 80mm.
blade thickness: 1.5mm.
closed length: 107mm.
Total length: 190mm.
Weight: 42g.
Lock system: Viro-Block
Package: cardboard box with logos Opinel

The monster stainless-bladed no.12 Opinel locking saw is large, perfect for cutting branches and foliage of up to 8/9cm in diameter. With its blade designed with razor-sharp teeth like knives, cutting is clean, even and effortless. The blade locks using the Virobloc safety ring, which in addition to locking the blade in the open position for safety of use, now enables locking of the blade in the closed position for safety during carrying.

Blade Material: Carbon steel blade with anti-corrosion coating
Blade Length (cm): 12.0
Blade Length (cm): 12.0
Blade Thickness (cm): 0.2
Overall Length (cm): 24.0
Cutting Edge (cm): 12.0
Handle Material: Beech
Lock Type: Ring Lock

The famous French company Opinel, a particular issue of a folding has become a timeless classic. This version of the n. 10 is equipped with a practical corkscrew (5 sipirali, total length 65mm) folded into the handle.
Stainless steel blade Sandvik (carbon content 0.4%)
Virobloc exclusive system to lock the blade in closing and opening.

Ranked # 10
Type of production: Industrial
Production Lama France
Blade: Stainless steel
Handle: beech wood
Blade length: 100mm. - Corkscrew Length 65mm.
Blade Thickness: 2mm.
Closed Length: 130mm.
Thick when closed: 24mm.
Overall length: 230mm.
Weight: 62g.
Closing: Virobloc

Opinel - Display Glass Collection 10-piece stainless steel blade - knife

Invented in 1890 and still today produced in Savoy, the pocket knife Opinel is famous worldwide.

Collection Set of 10 pieces 2-12 with glass lid

Type of production: Industrial
Production Lama France
Blade: stainless steel Sandvik 12C27
Blade treatment: Satin
Handle: Wood
Packaging: Wooden box with logos Opinel

From the famous French company Opinel, a particular issue of a folding has become a timeless classic. A knife studied for the opening of oysters and shells, thanks to the shape of the blade and to its generous thickness.
Blade in Sandvik stainless steel (carbon content 0.4%)
Exclusive Virobloc to lock the blade in closing and opening.

Ranked # 9
Type of production: industry
Production Lama France
Blade: stainless steel
Handle: bubinga wood
Blade length: 65mm.
Blade Thickness: 2.2mm.
Length closed: 118mm.
Thick when closed: 22mm.
Overall length: 180mm.
Weight: 62g.
Closing: Virobloc

Opinel - N ° 15 Effilé Padouk - Knife

Ranked # 15 
Type of production: industrial
Production Blade: France
Blade: stainless steel
Handle material: Padouk
Blade length: 150mm.
Blade Thickness: 1.2mm.
Closed Length: 175mm.
Thick when closed: 22mm.
Overall length: 325mm.
Weight: 58g.
Closure: viro block

Intended use: Sports / Collection

Type of production: Industrial
Lama production: France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Satin
Handle: Laminated birch wood in silver gray color
Blade length: 82mm.
Blade thickness: 2mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 20mm.
Balancing: -
Weight: 44g.
Closing: Virobloc
Clip: -
Sheath: -
Packaging: Cardboard box with Opinel logos
Note:

Intended Use: Housework / Electrician / Hobbies

Type of production: Industrial
Production Blade: France
Blade: Sandvik 12C27 stainless steel
Treatment Blade: -
Handle: Polyamide reinforced with glass fiber
Blade length: 95mm.
Blade thickness: 2.2mm.
Length closed: -
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 68g.
Closure: Virobloc
Clip: -
Sheath: -
Packaging: Cardboard Box
Notes: cable stripper, cutter, flat screwdriver 4mm, Phillips screwdriver Giragrilli 3.5/5mm, Magnet rear to hold the tips of the screwdriver in position

Opinel - The Giant 13 - stainless steel blade - knife

From the famous French company Opinel, a folding has become a timeless classic.

Sandvik stainless steel blade (carbon content 0.4%).
Handle of beech wood.

Ranked # 13 - giant version
Type of production: industrial
Production Blade: France
Blade: stainless steel
Handle: Beechwood
Blade length: 225mm.
Blade Thickness: 3mm.
Closed Length: 275mm.
Thick when closed: 42mm.
Overall length: 500mm.
Weight: 390g.
Lock: lock blade

Opinel - Les Effilés rosewood 8 stainless knife

Ranked # 8
Type of production: industrial
Production Blade: France
Blade: stainless steel
Handle material: Rosewood
Blade length: 75mm.
Blade Thickness: 2mm.
Closed Length: 103mm.
Thick when closed: 125mm.
Overall length: 185mm.
Weight: 30g.
Closure: viro block

Opinel - Les Effilés rosewood stainless steel knife # 10

Ranked # 10
Type of production: industrial
Production Blade: France
Blade: stainless steel
Handle material: Padouk wood
Blade length: 95mm.
Blade Thickness: 2mm.
Closed Length: 146mm.
Thick when closed: 125mm.
Overall length: 225mm.
Weight: 44g.
Closure: viro block

Opinel is a French company founded by the Opinel family based in Saint-Jean-de-Maurienne that has been manufacturing and distributing quality knives since 1890.
The structure of the Opinel knife is simple, with a steel or carbon blade and a stabilised wooden handle covered with a special protective varnish.
Opinel knives are light, easy to handle and affordable, making them some of the best-selling knives in the world.

N.12
Type of production: industrial
Blade production: France
Blade: stainless steel
Handle: padouk wood
Blade length: 120mm.
Blade thickness: 2mm.
Length when closed: 146mm.
Thickness when closed: 22mm.
Total length: 275mm.
Weight: 46g.
Closure: viro block

Opinel - Serpette billhook 12 - stainless steel blade - knife

N. 08
Production Blade: France
Blade: Stainless steel curve
Handle: Beechwood
Blade length: 78mm.
Blade Thickness: 2mm.
Closed Length: 120mm.
Thick when closed: 22mm.
Overall length: 200mm.
Weight: 78g.
Closure: viro block

Opinel - Serpette billhook 12 - stainless steel blade - knife

Ranked # 12
Production Blade: France
Blade: Stainless steel curve
Handle: Beechwood
Blade length: 78mm.
Blade Thickness: 2mm.
Closed Length: 120mm.
Thick when closed: 22mm.
Overall length: 200mm.
Weight: 78g.
Closure: viro block

Opinel - Les Effilés beech wood steel 12 knife

Ranked # 12
Type of production: craft
Production Blade: France
Blade: stainless steel
Handle: Beechwood
Blade length: 120mm.
Blade Thickness: 2mm.
Closed Length: 146mm.
Thick when closed: 22mm.
Overall length: 275mm.
Weight: 46g.
Closure: viro block

Opinel - 7 - stainless steel blade - knife

From the famous French company Opinel, a folding has become a timeless classic.
Sandvik stainless steel blade (carbon content 0.4%).
Handle of beech wood.
Exclusive Virobloc system to lock the blade in the closing and opening.

Ranked # 8
- Blade 7.5 cm, total length 17.5 cm
- Weight: 38 gr.

Opinel - 9 - stainless steel blade - knife

From the famous French company Opinel, a folding has become a timeless classic.
Sandvik stainless steel blade (carbon content 0.4%).
Handle of beech wood.
Exclusive Virobloc system to lock the blade in the closing and opening.

Ranked # 8
- 9cm blade, total length 21cm
- Weight: 48 gr.

Intended Use: Housework / Electrician / Hobbies

Type of production: Industrial
Production Blade: France
Blade: Sandvik 12C27 stainless steel
Treatment Blade: -
Handle: Polyamide reinforced with glass fiber
Blade length: 95mm.
Blade thickness: 2.2mm.
Length closed: -
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 68g.
Closure: Virobloc
Clip: -
Sheath: -
Packaging: Cardboard Box
Notes: cable stripper, cutter, flat screwdriver 4mm, Phillips screwdriver Giragrilli 3.5/5mm, Magnet rear to hold the tips of the screwdriver in position

Dalla famosa azienda francese Opinel, un pieghevole ormai diventato un classico senza tempo.
Lama in acciaio al carbonio; resistente e facile da affilare richiede però un buon livello di manutenzione per evitare fenomeni corrosivi, si raccomanda quindi di pulire il coltello dopo l'uso e oliare/ingrassare la lama in caso venga riposto per lunghi periodi.
Manico il legno di faggio verniciato arancione.
Esclusivo sistema Virobloc per bloccare la lama in chiusura e apertura.

N.10
- lama 10cm , lunghezza totale 23cm
- peso: 70 gr.

Dalla famosa azienda francese Opinel, un pieghevole ormai diventato un classico senza tempo.

Lama in acciaio inox Sandvik (tenore di carbonio 0,4%).
Manico in legno di faggio
Esclusivo sistema Virobloc per bloccare la lama in chiusura e apertura.

N.12
- lama 12cm , lunghezza totale 28cm
- peso: 112 gr.

Dalla famosa azienda francese Opinel, un pieghevole ormai diventato un classico senza tempo.
Lama in acciaio inox Sandvik (tenore di carbonio 0,4%).
Manico il legno di faggio.
Esclusivo sistema Virobloc per bloccare la lama in chiusura e apertura.

N.10
- lama 10cm , lunghezza totale 23cm
- peso: 68 gr.

Dalla famosa azienda francese Opinel, un pieghevole ormai diventato un classico senza tempo.
Lama in acciaio inox Sandvik (tenore di carbonio 0,4%).
Manico il legno di faggio.
Esclusivo sistema Virobloc per bloccare la lama in chiusura e apertura.

N.8
- lama 8cm , lunghezza totale 19cm
- peso: 44 gr.

From the famous French company Opinel, a folding has become a timeless classic.

Sandvik stainless steel blade (carbon content 0.4%).
Handle of beech wood.
Exclusive Virobloc system to lock the blade in the closing and opening.

Number 6
- 7cm blade, total length 16.5cm
- Weight: 28 gr.

Intended use: Mushroom knife

Blade: Sandvik 12C27 stainless steel
Handle: oak wood
Blade length: 70mm.
Blade thickness: 2mm.
Length closed: 125mm.
Total length: 200mm.
Balancing: -
Weight: 95g.
Closure: viroblock
Clip: -
Sheath: in leatherette and fabric
Notes: Boar bristle brush, wooden gift box

Knife withdrawn from a private collection - Knife no longer in production since 2014 - in excellent condition, without box - Never resharpened - Checked and certified by our internal Coltelleria Collini laboratory.

Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim Vagner