bing
News
Best news of March
Shop By
Shopping Options
Brand
  1. Acta Non Verba 8items
  2. Aitor 4items
  3. Antonini 19items
  4. Benchmade 206items
  5. BlackFox 22items
  6. Boker 159items
  7. Cold Steel 79items
  8. Coltelleria Collini 3items
  9. Consigli 54items
  10. CRKT 75items
  11. Extrema Ratio 125items
  12. Fallkniven 38items
  13. Fox Knives 252items
  14. Ka Bar 13items
  15. Kai Knives 1item
  16. Laguiole en Aubrac 79items
  17. Leatherman 1item
  18. Lion Steel 91items
  19. Maserin 163items
  20. Mcusta 68items
  21. Nitecore 2items
  22. Opinel 74items
  23. Saji Takeshi 2items
  24. Sanelli 1item
  25. Spyderco 190items
  26. Victorinox 13items
  27. Viper 150items
  28. Zero Tolerance 95items
  29. Approved 99items
  30. ADV Tactical 20items
  31. Al-Mar 4items
  32. Andrew Demko Knives 5items
  33. Bastinelli Knives 6items
  34. Begg Knives 7items
  35. Benchmark 1item
  36. Beretta 2items
  37. Berkel 1item
  38. Berti 2items
  39. BlachHawk Blades 7items
  40. BladeTech 1item
  41. Bradley 5items
  42. Brian Tighe and Friends 3items
  43. Buck 12items
  44. Carl Schlieper 3items
  45. Case 12items
  46. Chris Reeve Knives 31items
  47. Citadel 16items
  48. Combative Edge 4items
  49. David 4items
  50. Douk Douk 5items
  51. DPX Gear 1item
  52. Eickhorn 3items
  53. Emerson 11items
  54. Enzo 13items
  55. EOS 13items
  56. Esee Knives 8items
  57. Fantoni 25items
  58. Forge de Laguiole 5items
  59. G. Sakai 3items
  60. Gerber 17items
  61. Gilles 6items
  62. Guardian Tactical 20items
  63. Halcon Spain 3items
  64. Heckler and Kock 1item
  65. Helle 2items
  66. Hikari Japan 6items
  67. Hoffner Knives 14items
  68. Hogue Knives 5items
  69. Ibberson 1item
  70. Jaguar Knives 7items
  71. Kanekoma 5items
  72. Kershaw 45items
  73. Koji Hara 2items
  74. Linder 1item
  75. Lone Wolf 8items
  76. Master of Defense 3items
  77. MedFordKnives 38items
  78. Mercury 1item
  79. Microtech 14items
  80. Mil Tac 4items
  81. MKM 68items
  82. Nilte 2items
  83. No Brand 17items
  84. Olamic Cutlery 5items
  85. Ontario 6items
  86. Piscitelli 2items
  87. Pohl Force 37items
  88. Quartermaster 17items
  89. Rick Hinderer Knives 10items
  90. Rockstead 21items
  91. Sandrin Knives 7items
  92. Sergio Consoli 2items
  93. Smith and Wesson 1item
  94. SOG 25items
  95. Spartan Blades 18items
  96. Stedemon Knife Co. 2items
  97. Steel Will 2items
  98. Strider 6items
  99. TB Outdoor 7items
  100. Timberline 1item
  101. Tops Knives 1item
  102. Tridentum 1item
  103. United Cutlery 1item
  104. Waffentechnik 2items
  105. WanderTactical 23items
  106. We Knife Co. 3items
Less
Stock
  1. In Stock 12items
  2. Out of Stock 105items
Rating
  1. 5
    10items
  2. 4
    & up
    24items
  3. 3
    & up
    26items
Set Ascending Direction

Items 1-48 of 117

Page
  1. Pohl Force - Bravo Two Classic - FDE Dark Stonewashed ATS-34 - 1079 - knife

    To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.

    From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.

    It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.

    The Bravo Two Classic BK is equipped with an FDE (Flat Dark Earth) fibreglass handle and a Tanto blade with a Dark Stonewashed finish.


    Intended use: Tactical, collection
    Type of production: Industrial
    Blade: Hitachi ATS-34 stainless steel
    Blade finish: Dark Stonewashed
    Handle: GRP (glass-reinforced polyester)
    Blade length: 83mm.
    Blade thickness: 3.5mm.
    Total length: 195mm.
    Thickness when closed: 14mm.
    Weight: 120g.
    Closure: Back Lock
    Packaging: Cardboard box with Pohl Force logos
    Notes: Numbered and with certificate of authenticity with signature and date of manufacture

    PF-1079FDE
    €172.13
    Only 2 left
    Only 2 left
  2. Pohl Force - Bravo One Classic - FDE Dark Stonewashed ATS-34 - 1077 - knife

    To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.

    From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.

    It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.

    The Bravo One Classic BK features an FDE (Flat Dark Earth) fibreglass handle and a Drop point blade with a Dark Stonewashed finish.


    Intended use: Tactical, collection
    Type of production: Industrial
    Blade: Hitachi ATS-34 stainless steel
    Blade finish: Dark Stonewashed
    Handle: GRP (glass-reinforced polyester)
    Blade length: 83mm.
    Blade thickness: 3.5mm.
    Total length: 195mm.
    Thickness when closed: 14mm.
    Weight: 120g.
    Closure: Back Lock
    Packaging: Cardboard box with Pohl Force logos
    Notes: Numbered and with certificate of authenticity with signature and date of manufacture

    PF-1077FDE
    €172.13
    Only 1 left
    Only 1 left
  3. Laguiole En Aubrac - raw buffalo horn - knife

    Destination: French regional collector's knife

    Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
    Handle: raw buffalo
    Blade length: 90 mm.
    Blade thickness: 2.5 mm.
    Total length: 220 mm.
    Weight: 72 g.
    Folders: Stainless Steel
    Heads: Absent
    Closure: Retention spring in brushed stainless steel
    Clip: Absent
    Sheath: Absent

    L0512CBI/FSI1
    €143.44
    Only 2 left
    Only 2 left
    Rating:
    100%
    5
  4. Laguiole En Aubrac - Le Randonneur knife - Boxwood collection knife

    Intended use: Sports

    Type of production: artisanal
    Production Lama: France
    Blade: 12C27 stainless steel
    Blade treatment: -
    Handle: Boxwood
    Blade length: 98mm.
    Blade thickness: 2.5mm.
    Closed length: 119mm.
    Total length: 219mm.
    Thick when closed: 16mm.
    Balancing: -
    Weight: 70g.
    Closure: Simple spring
    Clip: -
    Sheath: -
    Packaging: cardboard tubular box with Laguiole en Aubrac logos
    Note:

    L0512RBI-LSB1
    €77.87
    Only 1 left
    Only 1 left
  5. Laguiole En Aubrac - Sauveterre knife in buffalo horn - handmade knife

    French regional knife handcrafted in the city of Sauveterre

    Blade: Swedish 12C27 to 54HRC stainless steel.
    Handle: horn
    Blade length: 90 mm.
    Blade thickness: 3 mm.
    Total length: 200 mm.
    Weight: 90 g.
    Folders: Stainless Steel
    Heads: Stainless steel
    Closure: Stainless steel retention spring
    Clip: Absent
    Sheath: Absent

    SA509BUI
    €113.93
    Only 1 left
    Only 1 left
  6. Laguiole En Aubrac - Capucin carbon and bronze - 8cm - collection knife

    Intended use: Sports / collection

    Type of production: Industrial
    Production Lama: France
    Blade: 12C27 stainless steel
    Blade treatment: satin
    Handle: carbon fiber and copper
    Blade length: 77mm.
    Blade thickness: 2.5mm.
    Closed length: 100mm.
    Total length: 177mm.
    Thick when closed: 20mm.
    Balancing: -
    Weight: 47g.
    Closing: -
    Clip: -
    Sheath: -
    Packaging: -
    Note: -

    L0510CCBI
    €139.34
    Only 1 left
    Only 1 left
  7. Laguiole En Aubrac - Alsacien Ebony - ALS99EBC / NSB1 - knife collection

    Destination: French collector's regional knife

    Blade: 12C27 Swedish polished stainless steel to 54HRC.
    Handle: ebony wood
    Blade length: 70 mm.
    Blade thickness: 2.5 mm.
    Total length: 180 mm.
    Weight: 70 g.
    Folders: Stainless Steel
    Heads: Stainless Steel
    Closure: Retention spring
    Clip: Absent
    Sheath: Absent

    2481
    €93.44
    Only 1 left
    Only 1 left
  8. Laguiole En Aubrac - Le Randonneur knife - Ginepro coltello collezione

    Destinazione d'uso: Sportivo

    Tipo di produzione: artigianale
    Produzione Lama: Francia
    Lama: In acciaio inox 12C27
    Trattamento Lama: -
    Manicatura: Legno di Ginepro
    Lunghezza lama: 98mm.
    Spessore lama: 2.5mm.
    Lunghezza chiuso: 119mm.
    Lunghezza totale: 219mm.
    Spessore da chiuso: 16mm.
    Bilanciatura: -
    Peso: 70g.
    Chiusura: A molla semplice
    Clip: -
    Fodero: -
    Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
    Note:

    L0512REI-LSB1
    €77.87
    Only 1 left
    Only 1 left
  9. Laguiole En Aubrac - Le Randonneur knife - Oak knife collection

    Intended use: Sports

    Type of production: artisanal
    Production Lama: France
    Blade: 12C27 stainless steel
    Blade treatment: -
    Handle: Oak wood
    Blade length: 98mm.
    Blade thickness: 2.5mm.
    Closed length: 119mm.
    Total length: 219mm.
    Thick when closed: 16mm.
    Balancing: -
    Weight: 70g.
    Closure: Simple spring
    Clip: -
    Sheath: -
    Packaging: cardboard tubular box with Laguiole en Aubrac logos
    Note:

    L0512RHI-FSB1
    €77.87
    Only 1 left
    Only 1 left
  10. Laguiole En Aubrac - Le Randonneur knife - Olivo coltello collezione

    Destinazione d'uso: Sportivo

    Tipo di produzione: artigianale
    Produzione Lama: Francia
    Lama: In acciaio inox 12C27
    Trattamento Lama: -
    Manicatura: Legno di Olivo
    Lunghezza lama: 98mm.
    Spessore lama: 2.5mm.
    Lunghezza chiuso: 119mm.
    Lunghezza totale: 219mm.
    Spessore da chiuso: 16mm.
    Bilanciatura: -
    Peso: 70g.
    Chiusura: A molla semplice
    Clip: -
    Fodero: -
    Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
    Note:

    L0512RLI-LSB1
    €77.87
    Only 1 left
    Only 1 left
  11. Laguiole En Aubrac - Le Randonneur knife - Wengè coltello collezione

    Destinazione d'uso: Sportivo

    Tipo di produzione: Industriale
    Produzione Lama: Francia
    Lama: In acciaio inox 12C27
    Trattamento Lama: -
    Manicatura: Legno di Wengè
    Lunghezza lama: 98mm.
    Spessore lama: 2.5mm.
    Lunghezza chiuso: 119mm.
    Lunghezza totale: 219mm.
    Spessore da chiuso: 16mm.
    Bilanciatura: -
    Peso: 70g.
    Chiusura: A molla semplice
    Clip: -
    Fodero: -
    Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
    Note:
    L0512RWI-LSB1
    €77.87
    Only 1 left
    Only 1 left
  12. Laguiole En Aubrac - Texalium - coltello collezione

    Coltello chiudibile realizzato artigianalmente dalla Laguiole En Aubrac una delle migliori e più antiche aziende francesi produttrici di coltelli “Laguiole”.

    – Acciaio Lama: 12C27 lucidata a specchio 

    – Manicatura: in Fibra di Carbonio e Texalium

    – Lunghezza totale: cm 21,5

    – Lunghezza lama: cm 10

    – Molla e “mosca” o “ape” (simbolo che contraddistingue un Laguiole visibile sul dorso del coltello) forgiata

    – Peso: 89 grammi

    3258
    €159.84
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  13. Laguiole En Aubrac - Ebony and Mammoth Fossil Ivory - Knife

    Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.

    This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.

    Intended use: regional/collectible

    Type of production: handcrafted
    Blade: stainless steel Sandvik 12C27
    Country of manufacture: France
    Handle: ebony wood with mammoth fossil ivory insert
    Blade length: 104mm.
    Blade thickness: 3mm.
    Length closed: 119mm.
    Total length: 220mm.
    Weight: 104g.
    Closure: rear retention spring
    Clip: -
    Scabbard: -
    Notes: -

    L-ENEBAVFM
    €237.70
    Only 0 left
    Only 0 left
    Out of stock
  14. Laguiole Rossignol - Classic Tip of the Horn - PRIVATE COLLECTION - collection knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION

    Condition: Excellent condition
    Available in the market: YES
    Sharpening: Original
    Marks on blade: NO
    Marks on handle: NO
    Packaging: NO
    Sheath: YES
    Manuals, Certificates, and Warranties: NO
    Checked and Certified: by our internal laboratory

    Intended use: Regional/Collection

    Type of production: handmade
    Blade: in 12C27 stainless steel
    Blade Production: France
    Handle: Blonde Bovine Horn
    Blade length: 100mm.
    Blade thickness: 3mm.
    Closed length: 120mm.
    Total length: 220mm.
    Balance: -
    Weight: 104g.
    Lock: rear retention spring
    Clip: -
    Sheath: -
    Notes: -

    AP-LR-C
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  15. Laguiole En Aubrac - Le Camembert - Pistachio Wood - knife

    The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.

    This knife is dedicated to Camembert and is sold in the round wooden box typical of this famous cheese known throughout the world.

    Intended use: Regional/Collection

    Type of production: artisanal
    Blade: Stainless steel 12C27
    Country of production: France
    Handle: Pistachio wood
    Blade length: 80mm.
    Blade thickness: 2.6mm.
    Length closed: 110mm.
    Total length: 193mm.
    Weight: 88g.
    Closure: Rear retention spring
    Clip: -
    Sheath: -
    Notes: wooden box

    CB-PIST
    €110.65
    Only 0 left
    Only 0 left
    Out of stock
  16. Pohl Force - Bravo Two Classic - Black Two Tone ATS-34 - 1078 - knife

    To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.

    From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.

    It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.

    The Bravo Two Classic BK is equipped with a black fibreglass handle and a Tanto blade with an exciting two-tone finish (stonewashed/satin-finished lengthwise).


    Intended use: Tactical, collection
    Type of production: Industrial
    Blade: Hitachi ATS-34 stainless steel
    Blade finish: Dual Tone (stonewashed + satin-finished)
    Handle: GRP (glass-reinforced polyester)
    Blade length: 83mm.
    Blade thickness: 3.5mm.
    Total length: 195mm.
    Thickness when closed: 14mm.
    Weight: 120g.
    Closure: Back Lock
    Packaging: Cardboard box with Pohl Force logos
    Notes: Numbered and with certificate of authenticity with signature and date of manufacture

    PF-1078BK
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  17. Pohl Force - Bravo One Classic - Black Two Tone ATS-34 - 1076 - knife

    To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.

    From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.

    It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.

    The Bravo One Classic BK is equipped with a black fibreglass handle and a drop point blade with an exciting two-tone finish (stonewashed/longitudinal satin finish).


    Intended use: Tactical, collection
    Type of production: Industrial
    Blade: Hitachi ATS-34 stainless steel
    Blade finish: Dual Tone (stonewashed + satin-finished)
    Handle: GRP (glass-reinforced polyester)
    Blade length: 83mm.
    Blade thickness: 3.5mm.
    Total length: 195mm.
    Thickness when closed: 14mm.
    Weight: 120g.
    Closure: Back Lock
    Packaging: Cardboard box with Pohl Force logos
    Notes: Numbered and with certificate of authenticity with signature and date of manufacture

    PF-1076BK
    €172.13
    Only 0 left
    Only 0 left
    Out of stock
  18. Laguiole En Aubrac - Raw Buffalo Horn with Damascus Steel Blade - Knife

    Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.

    This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.


    Intended use: regional/collectible

    Type of production: handcrafted
    Blade: stainless damasci steel
    Country of manufacture: France
    Handle: raw buffalo horn
    Blade length: 104mm.
    Blade thickness: 3mm.
    Length closed: 119mm.
    Total length: 220mm.
    Weight: 104g.
    Closure: rear retention spring
    Clip: -
    Scabbard: -
    Notes: -

    L0512CBI/FDBI1
    €204.92
    Only 0 left
    Only 0 left
    Out of stock
  19. Laguiole En Aubrac - Horn point - spring engraved with Maltese cross - knife

    The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.

    This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.

    The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration. 

    The back spring (with the Maltese cross symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme. 

    Intended use: Regional/Collection

    Type of production: artisanal
    Blade: Stainless steel 12C27
    Blade production: France
    Handle: Blond cow horn
    Blade length: 100mm.
    Blade thickness: 3mm.
    Length closed: 120mm.
    Total length: 220mm.
    Balance: -
    Weight: 104g.
    Closure: Rear retention spring
    Clip: -
    Sheath: -
    Notes: -

    LEA-croce-m
    €213.12
    Only 0 left
    Only 0 left
    Out of stock
  20. Laguiole En Aubrac - Horn Point - spring engraved with Pilgrim's Shell - VG10 in Sanmai - knife

    The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.

    This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.

    The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration. 

    The back spring (with the Pilgrim's shell symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme. 

    The blade uses 67-layer Japanese VG10 rolled steel, manufactured by Takefu Steel.

    Intended use: Regional/Collection

    Type of production: artisanal
    Blade: Damascus and Japanese VG10 rolled steel
    Blade production: France
    Handle: Blond Cowhorn
    Blade length: 100mm.
    Blade thickness: 3mm.
    Length closed: 120mm.
    Total length: 220mm.
    Balance: -
    Weight: 104g.
    Closure: Rear retention spring
    Clip: -
    Sheath: -
    Notes: -

    aubrac-conchiglia
    €262.30
    Only 0 left
    Only 0 left
    Out of stock
  21. Laguiole En Aubrac - Hunteing knife - Ebony - L0514EBI - knife

    These high quality knives, are handcrafted in the tradition of French Thiers cutlery.

    This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.

    The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.

    The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly. 

    The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs. 

    The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.

    Intended Use: Regional/Collection/Outdoor/Hunting

    Type of production: handcrafted
    Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
    Blade Production: France
    Handle: Ebony
    Blade length: 110mm.
    Blade thickness: 4mm.
    Length closed: 138mm.
    Total length: 240mm.
    Balance: -
    Weight: 180g.
    Closure: rear retention spring
    Clip: -
    Scabbard: -
    Notes: -

    L0514EBI
    €209.02
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  22. Laguiole En Aubrac - Mandailles knife - Buffalo horn - knife

    A handmade Laguiole en Aubrac knife made by a master craftsman from the region of origin of Laguiole. Extremely precise in its manufacture, it is decorated with the shepherd's cross on the handle. This cross allowed those who left during the long months of the transhumance to say their prayers once the knife was stuck in the bread.

    Destination: French regional collector's knife

    Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
    Handle: buffalo
    Blade length: 90 mm.
    Blade thickness: 2.5 mm.
    Total length: 220 mm.
    Weight: 68 g.
    Folders: Stainless Steel
    Heads: Absent
    Closure: Retention spring in brushed stainless steel
    Clip: Absent
    Sheath: Absent

    L0512BUMIF
    €241.80
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  23. Laguiole - En Aubrac - Trappeur Olive knife - knife

    Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.

    Blade: 12C27 Swedish steel with 54HRC satin finish.
    Handle: in olive wood
    Blade length: 105 mm.
    Blade thickness: 4 mm.
    Total length: 240 mm.
    Weight: 160 g.
    Closure: spring
    Sheath: -
    Note:

    LEA-T-W
    €131.15
    Out of stock
  24. Pohl Force - Alpha Four Knife - Outdoor Version - 1059 - knife

    Intended use: Sports / Tactical

    Type of production: Industrial
    Blade: CTS-BD1 stainless steel
    Blade treatment: micro-shot blasting
    Handle: Zytel
    Blade length: 113mm.
    Blade thickness: 5mm.
    Total length: 260mm.
    Thick when closed: 18mm
    Balancing: set back by 1cm from the guard branch
    Weight: 270g.
    Closure: Liner Lock
    Clip: Removable and reversible, in stainless steel
    Packaging: cardboard box with Pohl Force logos - numbered guarantee certificate - sticker with Pohl Force logos - PVC patch with velcro
    Notes: Peg for opening with a single hand, which can be disassembled / assembled according to your preferences

    PF-1059
    €0.00
    Only -99 left
    Only -99 left
    Rating:
    93%
    4.7
    Out of stock
  25. Laguiole En Aubrac - Camel bone with Japanese SanMai blade - knife

    Intended use: Regional / Collection
    Type of production: handmade
    Blade: Japanese "sanmai" laminated steel with external damask cheeks and VG10 to 61HRC cutting edge
    Country of production: France
    Handle: Camel bone
    Blade length: 100mm.
    Blade thickness: 3mm.
    Length closed: 120mm.
    Total length: 220mm.
    Weight: 104g.
    Closure: back retention spring
    Clip: absent
    Sheath: absent

    L0512O1H
    €286.89
    Only 0 left
    Only 0 left
    Out of stock
  26. Laguiole En Aubrac - Lo Fau in boxwood - regional knife

    Intended use: Collection / Sports

    Type of production: artisan
    Country of production: Laguiole, France
    Blade: Sandvik 12C27 stainless steel
    Blade treatment: Satin
    Handle: Boxwood
    Blade length: 82mm.
    Blade thickness: 2.4mm.
    Length closed: 111mm.
    Total length: 193mm.
    Weight: 53g.
    Opening: manual, two-handed
    Closure: simple spring
    Clip: -
    Sheath: -
    Notes: always accompany the blade during closing to prevent the thread from beating and ruining

    LFU99WAI
    €80.33
    Out of stock
  27. Laguiole En Aubrac - Laguiole bovine horn tip 12cm - collection knife

    Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.

    The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".

    The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.

    The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.


    Intended use: Collection / Sports

    Type of production: Artisan
    Country of production: Laguiole, France
    Blade: Sandvik 12C27 stainless steel
    Blade treatment: Mirror polished
    Handle: Tip of bovine horn
    Blade length: 112mm.
    Blade thickness: 3mm.
    Length closed: 143mm.
    Total length: 255mm.
    Weight: 80g.
    Opening: manual, two-handed
    Closure: simple spring
    Clip: -
    Sheath: -
    Notes: always accompany the blade during closing to prevent the thread from beating and ruining

    L0514BUI-FSI1
    €159.84
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  28. Laguiole En Aubrac - Fidelis Ebène - regional knife

    The "Fidelis" was born from the desire to pay homage to the "medieval Larzac", with its old Templar villages and legends.
    It is a knife that symbolizes the roughness of this land, the rusticity of its vegetation and its climate, but also the nobility of women and men who have worked, modeled, guarded and inserted into this object a soul.
    Made in Millau, in the heart of Aveyron, in the cutlery workshops "L'ame du Causse", it is worked with noble materials, such as the precious wood of ebony that the Knights Templars have brought back to their return. Its "sage leaf" blade, made of 12C27 steel, renowned for its cutting quality and ease of maintenance, will be a guarantee of longevity. The "Fidelis" will be your ideal companion to share moments of everyday life full of history.

    Intended use: Regional

    Type of production: Industrial
    Country of production: France
    Blade: 12C27 stainless steel
    Blade treatment: Satin
    Handle: Ebony wood
    Blade length: 85mm.
    Blade thickness: 2.5mm.
    Length closed: 110mm.
    Total length: 195mm.
    Weight: 54g.
    Opening: manual, two-handed
    Closure: upper safety ring
    Packaging: cardboard case
    Note: -

    2996F
    €77.87
    Out of stock
  29. Laguiole - En Aubrac - Trappeur Olive knife - knife

    Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.

    Blade: 12C27 Swedish steel with 54HRC satin finish.
    Handle: in olive wood
    Blade length: 105 mm.
    Blade thickness: 4 mm.
    Total length: 240 mm.
    Weight: 160 g.
    Closure: spring
    Sheath: -
    Note:

    L0514TOLI
    €131.15
    Only 0 left
    Only 0 left
    Out of stock
  30. Mercury - Logan Orange by Moreno Franzin - knife

    Logan is not a common liner, but hides an epic revolution in the constructive concept!

    Unlike traditional liners, Logan has no moving pins, but is born from a 5th titanium monolith. The accurate CNC milling machines produce Logan's body: solid, lightweight, slim and highly functional where the blade rotates on the pin, one With the base, to ensure a high strength and sturdiness. The retractable screws in the body give Logan the ultimate touch of clean elegance.

    Purpose: Sportsman / EDC

    Type of production: Industrial
    Country of production: Maniago - Italy
    Blade: D2 Steel at 61HRC hardened vacuum
    Blade treatment: beaded blast
    Handle: Titanium monolithic 6AL4V and G10
    Blade Length: 95mm.
    Blade thickness: 3mm.
    Closed length: 113mm.
    Total length: 205mm.
    Closed thickness: 9mm.
    Weight: 96g.
    Opening: In one hand, with removable T-pin, on the back of the blade
    Washers: Teflon
    Closure: Liner Lock
    Clip: Stainless steel, removable and reversible
    Sheath: Upholstered zip pocket
    Packing: Cardboard box with Mercury logos
    Notes: Design by Moreno Franzin

    ME-LOGOR
    €188.52
    Out of stock
  31. Laguiole en Aubrac - Carbon fiber with SanMai blade - knife

    Intended Use: Regional / Collection

    Type of production: Hand
    Blade: sanmai steel with sharp VG10 burnished and damask cheeks to 32 layers
    Production Country: France
    Handle: Carbon fiber with aluminum liners
    Blade length: 100mm.
    Blade Thickness: 3mm.
    Closed Length: 120mm.
    Overall length: 220mm.
    Weight: 70g.
    Closure: retaining spring
    Clip: absent
    Sheath: absent
    Notes: -

    au-carbon
    €254.10
    Out of stock
  32. Pohl Force - Mike Five - Rosewood Santos - 1063 - Knife

     

    Intended use: Sports

     

    Type of production: Industrial
    Production Country: Italy
    Blade: stainless Niolox
    Blade treatment: Satin finish
    Handle: Rosewood Wood Santos with stainless steel liners
    Blade length: 95mm.
    Blade thickness: 4mm.
    Closed Length: 125mm.
    Overall length: 220mm.
    Thick when closed: 15mm.
    Balancing: -
    Weight: 185g.
    Lock: Back Lock
    Clip: Removable and reversiile, stainless steel
    Sheath: -
    Packaging: Cardboard box with nylon zip bag, lanyard, patches PVC and velcro, guarantee certificates
    Notes: Made in Italy by LionSteel of Maniago (PN)

     

    PF-1063
    €0.00
    Only -99 left
    Only -99 left
    Out of stock
  33. Pohl Force - Alpha Four - Desert Tactical Limited Edition - 1061 - knife

    Intended use: Tactical collection
    Type of production: Industrial
    Blade: D2 steel
    Blade treatment: Satin finish
    Handle: Zytel
    Blade length: 113mm.
    Blade thickness: 5mm.
    Overall length: 260mm.
    Thick when closed: 18mm
    Balancing: 1cm back from the guard branch
    Weight: 270g.
    Lock: Liner Lock
    Clip: Removable and reversible, stainless steel
    Packaging: cardboard box with Pohl Force logos - numbered certificate of guarantee - Cordura sheath - sticker with Pohl Force logos
    Notes: Limited edition of just 600 numbered copies - Package Inside there is a small peg to mount on the back of the blade to make the opening knife with one hand

    PF-1060
    €0.00
    Only -99 left
    Only -99 left
    Rating:
    93%
    4.7
    Out of stock
  34. Pohl Force - Alpha Four - Desert Tactical Limited Edition - 1061 - knife

    Intended use: Tactical collection
    Type of production: Industrial
    Blade: D2 steel
    Blade treatment: Satin finish
    Handle: Zytel
    Blade length: 113mm.
    Blade thickness: 5mm.
    Overall length: 260mm.
    Thick when closed: 18mm
    Balancing: 1cm back from the guard branch
    Weight: 270g.
    Lock: Liner Lock
    Clip: Removable and reversible, stainless steel
    Packaging: cardboard box with Pohl Force logos - numbered certificate of guarantee - Cordura sheath - sticker with Pohl Force logos
    Notes: Limited edition of just 600 numbered copies - Package Inside there is a small peg to mount on the back of the blade to make the opening knife with one hand

    PF-1061
    €0.00
    Only -99 left
    Only -99 left
    Out of stock
  35. Pohl Force - Bravo One Gen3 - Survival 1050 - knife

    Third generation of the successful model of Pohl Force Bravo, now with steel CTS-BD1, blade slightly thicker design of the grips and renovated to offer better grip during use.

    Intended use: tactical, sports
    Type of production: Industrial
    Blade: Stainless steel CTS-BD1 59 / 61HRC
    Blade treatment: -
    Handle: Zytel
    Blade length: 83mm.
    Blade thickness: 3.5mm.
    Overall length: 195mm.
    Thick when closed: 16mm
    Balancing: -
    Weight: 120g.
    Closure: Back Lock
    Pouch: Cordura, with zip
    Packaging: cardboard box with logos Pohl Force, patches PVC and Velcro logo Pohl Force
    Notes: -

    PF1050
    €0.00
    Only -99 left
    Only -99 left
    Rating:
    93%
    4.7
    Out of stock
  36. Pohl Force - Bravo One Gen3 - Outdoor 1049 - knife

    Third generation of the successful model of Pohl Force Bravo, now with steel CTS-BD1, blade slightly thicker design of the grips and renovated to offer better grip during use.

    Intended use: tactical, sports
    Type of production: Industrial
    Blade: Stainless steel CTS-BD1 59 / 61HRC
    Blade treatment: -
    Handle: Zytel
    Blade length: 83mm.
    Blade thickness: 3.5mm.
    Overall length: 195mm.
    Thick when closed: 16mm
    Balancing: -
    Weight: 120g.
    Closure: Back Lock
    Pouch: Cordura, with zip
    Packaging: cardboard box with logos Pohl Force, patches PVC and Velcro logo Pohl Force
    Notes: -

    PF-1049
    €0.00
    Only -99 left
    Only -99 left
    Out of stock
  37. Laguiole en Aubrac - Ash Wood with blade sanmai - knife

    Intended Use: Regional / Collection

    Type of production: Hand
    Blade: laminated damask steel and VG10 Japanese
    Production Country: France
    Handle: wood ash
    Blade length: 100mm.
    Blade Thickness: 3mm.
    Closed Length: 120mm.
    Overall length: 220mm.
    Weight: 104g.
    Closure: retaining spring
    Clip: absent
    Sheath: absent
    Notes: -

    12646
    €204.92
    Out of stock
  38. Pohl Force - MK-1 Titanium - Limited Edition - 1065 - Knife

    Intended use: Tactical / Military / Collection

    Type of production: Industrial
    Country of production: Italy (by Lion Steel - Maniago)
    Blade: stainless Niolox
    Blade treatment: Blackwash
    Handle: Anodized Titanium 6Al4V
    Blade length: 113mm.
    Blade thickness: 5mm.
    Closed Length: 147mm.
    Overall length: 240mm.
    Thick when closed: 14mm.
    Weight: 240g.
    Lock: Frame Lock with stainless steel swing and integrated security system Rotoblock
    Clip: Removable, burnished stainless steel
    Packaging: Cardboard box with a nylon bag zip, patch velco Pohl Force and warranty certificates numbered
    Notes: Edition limited and numbered edition for only 200 numbered copies of the blade, box and certificate

    12601
    €0.00
    Only -99 left
    Only -99 left
    Out of stock
  39. Laguiole en Aubrac - Camel Bone with SanMai damascus blade - knife

    Intended Use: Regional / Collection

    Type of production: Hand
    Blade: laminated damascus steel and VG10 Japanese
    Production Lama France
    Handle: Giraffe bone with pink / purple color
    Blade length: 100mm.
    Blade Thickness: 3mm.
    Closed Length: 120mm.
    Overall length: 220mm.
    Weight: 104g.
    Closure: retaining spring
    Clip: absent
    Sheath: absent
    Notes: -

    12552
    €245.08
    Rating:
    100%
    5
    Out of stock
  40. Pohl Force - Bravo One Gen3 - Desert Outdoor 1056 - knife

    Third generation of the successful model of Pohl Force Bravo, now with steel CTS-BD1, blade slightly thicker design of the grips and renovated to offer better grip during use.

    Intended use: tactical, sports
    Type of production: Industrial
    Blade: Stainless steel CTS-BD1 59 / 61HRC
    Blade treatment: -
    Handle: Zytel
    Blade length: 83mm.
    Blade thickness: 3.5mm.
    Overall length: 195mm.
    Thick when closed: 16mm
    Balancing: -
    Weight: 120g.
    Closure: Back Lock
    Pouch: Cordura, with zip
    Packaging: cardboard box with logos Pohl Force, patches PVC and Velcro logo Pohl Force
    Notes: -

    12411
    €0.00
    Only -99 left
    Only -99 left
    Out of stock
  41. Pohl Force - Bravo One Gen3 - Desert Survival 1057 - knife

    Third generation of the successful model of Pohl Force Bravo, now with steel CTS-BD1, blade slightly thicker design of the grips and renovated to offer better grip during use.

    Intended use: tactical, sports
    Type of production: Industrial
    Blade: Stainless steel CTS-BD1 59 / 61HRC
    Blade treatment: Teflon coating
    Handle: Zytel
    Blade length: 83mm.
    Blade thickness: 3.5mm.
    Overall length: 195mm.
    Thick when closed: 16mm
    Balancing: -
    Weight: 120g.
    Closure: Back Lock
    Pouch: Cordura, with zip
    Packaging: cardboard box with logos Pohl Force, patches PVC and Velcro logo Pohl Force
    Notes: Inside the package is a pin / thumbstood to mount on the back of the blade to make the knife can be opened with one hand.

    12410
    €0.00
    Only -99 left
    Only -99 left
    Out of stock
  42. Pohl Force - Mike Four - EOD Outdoor - 1025 - Knife

    Intended use: Tactical / Military

    Type of production: Industrial
    Production Country: Italy
    Blade: Stainless Niolox
    Surface treatment: satin
    Handle: anodized aluminum
    Blade length: 95mm.
    Blade thickness: 4mm.
    Length closed: 127mm.
    Overall length: 220mm.
    Thick when closed: 14mm.
    Weight: 140g.
    Closure: Frame Lock with stainless steel swing
    Clip: mmovibile, stainless steel burnished
    Sheath: -
    Packaging: cardboard box with a nylon bag with zip, patch velco Pohl Force and warranty certificates numbered
    Notes: Manufactured in Italy by Lion Steel - evacuation hammer - pin for opening a removable hand

    12402
    €0.00
    Only -99 left
    Only -99 left
    Out of stock
  43. Laguiole en Aubrac - Mistral horn - craft knife

    Laguiole en Aubrac - Mistral horn - craft knife

    Destination: Knife regional French handmade.


    Blade: 12C27 stainless steel
    Handle: horn
    Blade length: 90 mm.
    Blade thickness: 3 mm.
    Overall length: 200 mm.
    Weight: 96 g.
    Folders: Stainless Steel
    Head: Stainless Steel
    Clasp: stainless steel retention spring
    Clip: None
    Sheath: None

    mistral
    €121.31
    Rating:
    100%
    5
    Out of stock
  44. Laguiole en Aubrac - Cognet in horn tip - craft knife

    Laguiole en Aubrac - Cognet in horn tip - craft knife

    Destination: Knife regional French handmade.

    This knife is produced by one of the companies aThiers knives oldest in France

    Blade: carbon steel.
    Handle: horn tip
    Blade length: 10 mm.
    Blade thickness: 3 mm.
    Overall length: 226 mm.
    Weight: 54 g.
    Folders: Stainless Steel
    Head: Stainless Steel
    Closing: no lock blade
    Clip: None
    Sheath: None

    cognet
    €77.87
    Out of stock
  45. Laguiole en Aubrac - Ancestral Hètre - craft knife

    Destination: Knife regional French handmade.

    This model is considered the forerunner in the design of the famous classic Laguiole

    Blade: Stainless swedish 12C27 to 54HRC polished.
    Handle: boxwood
    Blade length: 95 mm.
    Blade thickness: 3 mm.
    Overall length: 213 mm.
    Weight: 76 g.
    Folders: Stainless Steel
    Head: Stainless Steel
    Clasp: stainless steel retention spring
    Clip: None
    Sheath: None

    L0512DHI
    €122.95
    Rating:
    100%
    5
    Out of stock
  46. Laguiole en Aubrac - Sauveterre horn - craft knife

    Laguiole en Aubrac - Sauveterre horn - craft knife

    Destination: Knife regional French handcrafted in the city of Sauveterre

    Blade: Stainless swedish 12C27 to 54HRC polished.
    Handle: stag
    Blade length: 90 mm.
    Blade thickness: 3 mm.
    Overall length: 200 mm.
    Weight: 90 g.
    Folders: Stainless Steel
    Head: Stainless Steel
    Clasp: stainless steel retention spring
    Clip: None
    Sheath: None

    sauveterre-co
    €113.93
    Only 0 left
    Only 0 left
    Out of stock
  47. Laguiole en Aubrac - Sauveterre deer - craft knife

    Laguiole en Aubrac - Sauveterre deer - craft knife

    Destination: Knife regional French handcrafted in the city of Sauveterre

    Blade: Stainless swedish 12C27 to 54HRC polished.
    Handle: stag
    Blade length: 90 mm.
    Blade thickness: 3 mm.
    Overall length: 200 mm.
    Weight: 90 g.
    Folders: Stainless Steel
    Head: Stainless Steel
    Clasp: stainless steel retention spring
    Clip: None
    Sheath: None

    Sauveterre-c
    €113.93
    Only 0 left
    Only 0 left
    Out of stock
  48. Pohl Force - Alpha Five - Survival Plain Edge - 1048 - knife

    Intended Use: Tactical collection
    Type of production: Industrial
    Blade: Stainless steel CTS-BD1
    Treatment Lama: black
    Handle: Zytel
    Blade length: 113mm.
    Blade thickness: 5mm.
    Overall length: 260mm.
    Thick when closed: 18mm
    Balancing: backward 1cm from the branch guard
    Weight: 270g.
    Lock: Liner Lock
    Clip: Removable and reversible, stainless steel
    Packaging: cardboard box with logos Pohl Force - numbered certificate of guarantee - patch vinyl with velcro and logos Pohl Force - sticker logos Pohl Force
    Notes: Inside the box there is a small pin to mount on the back of the blade to make the knife can be opened with one hand

    PF-1048
    €0.00
    Only -99 left
    Only -99 left
    Out of stock
Set Ascending Direction

Items 1-48 of 117

Page




ecommerce sicuro