Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Conditions: in excellent conditions
Available in the market: NO
Sharpening: Original
Marks on blade: NO
Marks on handle: NO
Packaging: NO, without original box
Checked and Certified by our internal laboratory
Intended use: Tactical/Military

Blade: in 154CM stainless steel
Blade Production: USA
Handle: Zytel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balancing: -
Weight: 113g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: without box

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, but not used.
* Condition: Overall in good condition with some aesthetic dissimilarity of the Black TiNi finish due to time
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: Uneven color of Black TiNi finish given by signs of time
* Marks on handle: No.
* Box: Present, worn
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory


Intended Use: Sporting

Production type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade finish: Black TiNi
Handle: Zytel with steel liners
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 210mm.
Thickness when closed: 20mm.
Weight: 135g.
Closure: Arc Lock
Clip: removable, stainless steel
Packaging: cardboard box with SOG logos
Notes: previously purchased knife, from private collection

Knife withdrawn from private collection - Rare model no longer in production.

The Zero Tolerance 0500 model, also known as MUDD, was designed by Grant and Gavin Hawk. This knife is resistant to sand, dirt, and water thanks to the neoprene seals around the pivot and the lock.

The blade is coated in Tungsten DLC, approximately 9.2 cm long, and made of 154CM steel.

The handle is made of aluminum with textured G-10 grips, providing a solid grip.

This model was manufactured roughly between 2007 and 2009, and although the exact number of pieces produced is not known, estimates suggest a low quantity, probably between 1000 and 2500 units.

NOS FULL SET KNIFE, NEW FROM STOCK

Type: withdrawn from private collection
Condition: Like new
Available in the market: Out of production since 2009
Sharpening: Factory
Marks on blade: No
Marks on handle: No
Box: Included
Sheath: -
Manuals, Certificates, and Guarantees: Included
Checked and Certified by our internal laboratory

Rare knife produced by the Japanese Al-Mar in the late 80s and early 90s, now out of production and no longer available. Knife withdrawn from private collection and out of production - Knife slightly used, with small shallow marks on the left side of the blade, original leather sheath never used and never worn, including box (not original). The rubber grip has a slight break, with a small missing part, in the upper right rear part, near the corrugation. - Checked, re-sharpened and certified by our internal Collini Cutlery laboratory.

Intended use: Collection / Tactical
Type of production: Industriae
Country of production: Japan, Seki
Blade: AM-6 stainless steel
Blade treatment: satin finish
Handle: in rubber, with brass spacers
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 150mm
Total length: 255mm.
Weight: 320g.
Closing: Back Lock
Sheath: leather, new
Packaging: cardboard box, with Japanese logos, but not original Al-Mar
Notes: withdrawn from private collection - used - re-sharpened - with "DEOPPRESSOLIBER" logo on the left head

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In like-new condition
* Commercially available Discontinued as of 2022
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present (but from a different ZT knife).
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Sporting / Collection

Type of Production: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade Treatment: Black DLC
Handle: Titanium Black DLC and G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total length: 218mm.
Thickness when closed: 14mm.
Weight: 134g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings - Carson Flipper opening system

Translated with DeepL

NOS KNIFE (New, Old Stock) WITHDRAWN FROM PRIVATE COLLECTION.
* Type: Previously Purchased.
* Condition: NOS, like new
* Commercially available Out of production.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present (full set)
* Scabbard: -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory



Intended Use: Tactical/EDC

Production Type: Industrial
Country of Production: Japan - Seki
Blade: stainless steel AUS-8 56/58HRC
Blade finish: microbead blasting
Handle: aluminum liners, Zytel grips
Blade length: 126mm.
Blade thickness: 4mm.
Length closed: 149mm.
Total length: 275mm.
Thickness when closed: 19mm.
Weight: 198g.
Closure: Arc Lock
Clip: Removable, stainless steel
Packaging: black and white cardboard case with SOG logos
Notes: knife discontinued NOS (new, old stock) new and perfect in every part

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like New
* Commercially available: Discontinued since 2014, limited to only 150 numbered pcs.
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present - Original
* Scabbard: -
* Manuals, Certificates and Warranties: Warranty certificate with serial number, date of manufacture and signature.
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: USA
Blade: sintered stainless steel CPM-154CM
Blade Finish: Stone Washed
Handle: G10
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 178mm.
Thickness when closed: 17mm.
Weight: 190g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Quartermaster logos, warranty certificate with date of manufacture, serial number and signature
Notes: ORB Pivot System ball bearing opening system - 2014 limited edition specimen of only 150, individually numbered on blade and box (specimen number #91)

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available: Discontinued, replaced by later Gen.
* Sharpening: Professionally re-sharpened.
* Marks on blade: A few small abrasions.
* Marks on handle: Small marks on hardware and clip.
* Box: No
* Scabbard: -
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratory




Intended Use: Tactical / Collection 

Type of production: Midtech (semi-craft)
Country of manufacture: USA
Blade: Stainless steel CPM-20CV
Blade treatment: Stonewashed
Handle: 2mm-thick black G10 glove on 1mm-thick 6AL4V titanium liner. Frame in 6AL4V titanium, billet, 3mm thick with Hinderer Lockbar Stabilizer. 17-4PH stainless steel spacers and hardware.
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 105mm.
Total length: 178mm.
Thickness when closed: 13mm.
Weight: 100g.
Closure: frame lock type
Clip: stainless steel 17-4PH
Notes: knife from private collection, previously purchased

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued as of the end of 2021
* Sharpening: Factory sharpened, like new
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Scabbard: -
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory




Intended Use: Sporting/Tactical

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: Stonewash
Handle: Bronze-colored carbon fiber and Titanium
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 191mm.
Weight: 65g.
Closure: Framelock
Clip: Removable, stainless steel
Notes: KVT opening on ball bearings - Carson Flipper opening system - Design by Sinkevich

Knife withdrawn from private collection, like new, with original case - Model "made in Switzerland" made in collaboration with Klotzli in 1994 in about 1,000 numbered examples on the blade (about 500 plain edge and about 500 partially serrated) based on a design by famous American designer Michael Walker. Knife that combines two qualities difficult to match, especially in those years; lightness and sturdiness. Elegant gentlemen, easy to open and close with one hand thanks to the Liner-Lock system, invented by Walker himself. Peculiarities of this very rare production are also the engravings on blade and clip made by excision and not by laser.
 

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like new
* Commercially available Discontinued.
* Sharpening: Factory sharpened, perfect
* Marks on blade: no
* Marks on handle: no
* Box: Original leather pouch with zipper and spyderco logos.
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory


Intended use: sporting / collection

Type of production: industrial
Country of production: Switzerland
Blade: stainless steel ATS-34
Blade finish: Satin finish
Handle: carbon fiber with blue anodized titanium hardware
Blade length: 64mm.
Blade thickness: 2.4mm.
Length closed: 84mm.
Total length: 149mm.
Weight: 42g.
Closure: LinerLock in blue anodized titanium
Clip: blue anodized titanium
Notes: 1994 production, discontinued, numbered on blade (#625) - Design by Michael Walker

The SOG Tomcat is one of SOG's largest folding knives. It features a 5mm thick blade, making it a heavy-duty folding knife, and while it weighs more than the average folding knife, it will withstand heavy use. The SOG Tomcat also won the "Overall Knife of the Year" award in 1988, one of the company's first awards, for its outstanding design.

It is one of the most collected SOG folding knives

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Out of production, in production between 1986 and 2002
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: Yes, original, in perfect condition
* Sheath: original in cordura
* Manuals, Certificates and Warranties: present in the package
* Checked and certified by our internal laboratory

Intended use: Collection

Type of production: Industrial
Production Lama: Japan
Blade: 440C stainless steel
Blade treatment: -
Handle: Stainless steel and Kraton
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 116mm.
Total length: 210mm.
Thick when closed: -
Balancing: -
Weight: 216g.
Closure: back-Lock
Clip: -
Sheath: Nylon
Packaging: Cardboard box with SOG logos
Note:

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued, replaced by later Gen.
* Sharpening: Factory sharpened, but improvable
* Marks on blade: No
* Marks on handle: Small marks on hardware.
* Box: No
* Scabbard: -
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratory





Intended Use: Tactical / Collection 

Type of production: Midtech (semi-craft)
Country of manufacture: USA
Blade: Stainless steel CPM-20CV
Blade treatment: Stonewashed
Handle: 3mm thick G10 black (+ one spare in desert color) on 1mm thick 6AL4V titanium liner. Frame in 4mm thick billet 6AL4V titanium with Hinderer Lockbar Stabilizer. 17-4PH stainless steel spacers and hardware.
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 207mm.
Thickness when closed: 13mm.
Weight: 175g.
Closure: frame lock type
Clip: stainless steel 17-4PH
Notes: coyote paracord lanyard - second G10 scale, original Hinderer, in desert color - knife from private collection, previously purchased - product does not fall under "Loyalty" discounts

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Commercially available: no longer in production since 2014
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original ZT box
* Manuals, Certificates and Guarantees: ZT certificates
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Tactical / Military

Type of production: Industrial
Production Lama: USA
Blade: CPM-S30V steel
Blade treatment: Tungsten DLC Coating
Handle: Black anodized aluminum with non-slip Trac-Tec inserts
Blade length: 925mm.
Blade thickness: 4mm.
Closed length: 126mm.
Total length: 215mm.
Thick when closed: 17mm.
Balancing: -
Weight: 146g.
Closure: Liner Lock
Clip: Removable, Multiposition, in stainless steel
Sheath: -
Packaging:
Notes: Design by Ken Onion - SpeedSafe opening system

Knife withdrawn from private collection - 2011 model now discontinued and no longer available designed by Allen Elishewitz - Like new, with no special signs of wear and tear - Original factory sharpening in excellent condition - No original packaging - Checked and certified by our in-house laboratory.

Intended Use: Tactical

Production type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM at 58/60HRC
Blade Finish: Stonewashed
Handle: 3D machined G-10 G-Mascus
Blade length: 108mm.
Blade thickness: 3.5mm.
Length closed: 127mm.
Total length: 227mm.
Thickness when closed: 16mm
Weight: 150g
Closure: Button Lock with security system
Clip: Stonewashed Stainless Steel
Packaging: -
Notes: Design by Allen Elishewitz - knife withdrawn from private collection - like new

Knife withdrawn from private collection - First series (Gen1) of the model produced from 2010, born from the collaboration with Rick Hinderer - Discontinued and no longer available - Globally in very good condition with original sharpening - Supplied with custom G10 and original cheek piece, which can be installed as desired - Devoid of original packaging - Checked and certified by our in-house laboratory.

Intended Use: Sporting

Type of production: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S35VN
Blade finish: Stonewashed
Sleeve: Titanium and G-10 Black (with additional custom G10 gauntlet)
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 206mm.
Thickness when closed: 14mm.
Weight: 173g.
Closure: Frame Lock
Clip: Removable, reversible and multi-position, stainless steel
Packaging: -
Notes: Design by Rick Hinderer - Collected from private collection, overall in very good condition

Knife withdrawn from private collection - Rare model produced by Master of Defense around late 90s/early 00s and designed by James "Patches" Watson - Excellent condition. Never resharpened - No original box - Checked and certified by our workshop.

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.

Intended Use: Tactical/Collection
Production type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM black
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed: 112mm
Total length: 200mm.
Thickness when closed: 13mm
Weight: 116g.
Closure: Liner Lock
Clip: removable, stainless steel
Notes: knife withdrawn from private collection in excellent condition

Knife withdrawn from private collection - "TD" version now discontinued and no longer available - Overall in good condition - Shows small marks on both blade and handle, but nothing that compromises its actual use - Original factory sharpening still in good condition, definitely can be improved - Accompanied by original Extrema Ratio box and certificates and warranties - Checked and certified by our in-house laboratory.

Type of manufacture: industrial
Blade: stainless steel N690Co 58HRC
Country of manufacture: Italy
Handle: Anticorodal
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 99mm.
Total length: 168mm.
Weight: 82g.
Closure: Liner Lock
Clip: reversible and removable stainless steel
Notes: knife withdrawn from private collection, overall in good condition

Tactical / EDC knife produced in the late 1990s withdrawn from private collection - overall in excellent condition - with factory sharpening in good condition- no packaging or manuals - checked and guaranteed by our in-house laboratory.

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.

Intended Use: Tactical/Collection
Production type: Industrial
Country of manufacture: USA
Blade: 154CM stainless steel with titanium nitriding
Handle: aircraft aluminum with non-slip Kraton inserts
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 197mm.
Thickness when closed: 13mm
Weight: 108g.
Closure: Button Lock
Clip: removable, stainless steel
Packaging: knife withdrawn from private collection, overall in very good condition

Knife withdrawn from private collection. Overall in good condition shows small marks on clip, hardware and handle - Original factory sharpening in good condition - Complete with original Extrema Ratio cardboard box - Checked and certified by our in-house laboratory. 

Intended Use: Tactical/Sportsman

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924
Handle: rough anticorodal (aluminum)
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 15mm.
Weight: 139g.
Closure: Liner Lock, with additional safety catch
Clip: Removable and reversible stainless steel
Packaging: cardboard box with Extrema Ratio logos

From a private collection - 2011 model currently discontinued and no longer available - Winner of the 2010 Blade Show Award as the most innovative knife of the year - Overall in very good condition - Blade has a couple of small, shallow scratches and a speck of oxidation, handle has a small abrasion at the front - Free of box and accessories - Professionally regrind, inspected and guaranteed by our in-house workshop.

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: D2 steel at 59HRC
Surface finish: Satin finish
Handle: Monoblock, machined from solid, anodized Ergal 7075
Blade length: 95mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Thickness when closed: 9mm.
Weight: 155g.
Closure: Frame Lock, with additional Rotoblock security system
Clip: removable and reversible, stainless steel, deep pocket type, with glass breakthrough pin
Packaging: -
Notes: Winner of Blade Show Award 2010 as most innovative knife of the year - knife collected from private collection globally in excellent condition

Discontinued and no longer available model designed by Hinderer - Knife withdrawn from private collection, globally in excellent condition, with factory sharpening and original box - Originally with Carbon Fiber grip (included), accompanied by 2 additional aftermarket G10 grips and additional bronze-colored anodized titanium hardware - All original Zero Tolerance hardware is also included in the package - Checked and certified by our in-house laboratory.

Intended Use: Sporting/Tactical

Type of production: Industrial
Country of Production: USA
Blade: Elmax stainless steel
Blade Finish: Stonewashed
Handle: Stainless Steel and (originally) Carbon Fiber + 2 additional G10 grips
Blade Length: 82mm.
Blade thickness: 3mm.
Length closed: 113mm.
Total length: 196mm.
Thickness when closed: 12mm.
Weight: 145g.
Closure: Frame Lock
Clip: stainless steel, removable and multi-position (only on the carbon fiber gauntlet)
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - SpeedSafe opening system - Knife withdrawn from private collection equipped with 2 additional aftermarket G10 cheek pieces and custom titanium hardware, with bronze-colored anodizing

Knife taken from a private collection. Overall in very good condition, including the edge: there are a few small marks on the right side of the blade (see photo). Complete with Spyderco cardboard box but belonging to another Native 5 model (C41SBK5). Checked and certified by our in-house laboratory Coltelleria Collini.

Intended use: Sporting / Collection

Production Type: Industrial
Blade Production: USA
Blade: CPM-S35VN Powder Steel
Blade Treatment: TiNi
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 175mm.
Thickness when closed: 15.5mm.
Balance: -
Weight: 70g.
Closure: Back Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos, however belonging to another Native 5 model (C41SBK5)
Notes: -

Knife from private collection - Like new, never used, with original box, manuals and warranty certificates in excellent condition - Made in 1997 - "First Production Run" edition - All in mint condition. Checked and certified by our in-house laboratory.

Intended Use: Collector/Sportsman

Type of production: Industrial
Country of Production: USA
Blade: 440 stainless steel at 60HRC
Blade finish: microbead blasting
Handle: Nylon and Glass Fiber
Blade Length: 77mm.
Blade thickness: 2.5mm.
Total length: 195mm.
Weight: 81g.
Closure: Strut'N'Cut (modified back lock) or Slipjoint
Clip: removable and reversible, made of Nylon and Glass Fiber
Packaging: cardboard box with Meyerco logos
Notes: Like-new knife from private collection, dating from 1997 "First Production Run" edition, winner of Most Innovative American Knife of the Year at the Blade Show in Altlanta

Trivia:
In 1996 Blackie Collins was inducted into the Cutlery Hall of Fame. - The Strut'N'Cut knife is inspired by the soft suspension of Blackie Collins' Ducati motorcycle - In 1996 he partnered with Bill Meyer to create the Meyerco knife company. The two were immediate pioneers in the knife world, being the first company to launch an assisted-opening knife. Today Meyerco is credited with the invention of the spring-loaded knife. - Blackie Collins holds over 60 patents for knife mechanisms and many design patents for cutlery products. He was a cutlery legend and will be greatly missed.

Knife from private collection - Like new, never used, with original box in excellent condition - Mid 90's production still made in Japan, with VG-1 steel - All in mint condition. Checked and certified by our in-house laboratory.

Intended Use: Collector/Sportsman

Type of production: Industrial
Country of Production: Japan
Blade: Stainless steel VG-1
Blade Finish: Satin
Handle: Zytel
Blade length: 104mm.
Blade thickness: 3mm.
Total length: 233mm.
Weight: 105g.
Closure: Back-Lock
Clip: Removable, painted stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: Like-new knife from a private collection, dating from the mid-1990s; made in Japan from VG-1 steel

Knife taken from private collection - Rare Spyderco model produced in December 1997 - Absolutely like new, with original box, never taken out of the box and never used - Checked and certified by our internal laboratory.

Intended Use: Collection/Sporting

Production Type: Industrial
Country of Production: Japan
Blade: AUS-8 Stainless Steel
Handle: Micarta and Steel
Blade Length: 82mm.
Blade Thickness: 3mm.
Length closed: 114mm.
Total length: 196m.
Weight: 98g.
Closure: Liner Lock
Clip: Stainless steel
Package: original box with Spydero logos
Notes: knife made in 12/97, new, never used, with original box.

Knife acquired from a private collection - Overall in very good condition, with factory sharpening - Rare version, one of the first, with flat G10 handle - Hardened by Paul Bos, with logo present on the right heel of the blade - It has some small signs of abrasion on the tigerstripe finish, common to all Strider knives - Checked and certified by our internal laboratory.

Intended Use: Tactical

Manufacturing Type: Mid Tech (semi-craft)
Country of Production: USA
Blade: Stainless steel CPM-S30V hardened by Paul Bos
Blade Treatment: Tiger Stripe
Handle: G10 flat with 2mm titanium liners
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thickness closed: 18mm.
Weight: 228g.
Closure: Liner Lock
Clip: Titanium 
Package: Nylon pouch with zipper 
Notes: Rare version, one of the first, with G10 flat grip - Hardened by Paul Bos, with logo on the right heel of the blade

Knife withdrawn from a private collection - Rare model produced by the Master of Defense around 2005 - Excellent condition. Never resharpened - Without original box - Checked and certified by our internal laboratory Coltelleria Collini.

Master of Defense, an eclectic American brand no longer in business and later taken over by Blackhawk! Blades, produced various tactical and military type folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.

The only copy at our disposal, without box, rare and out of production for many years.

Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel - DLC
Handle: polymer with aeronautical aluminum inserts with Kraton anti-slip
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed length: 130mm
Total length: 223mm.
Thick when closed: 20mm
Weight: 170g.
Closure: Button Lock
Clip: removable, in stainless steel
Packaging:

Knife withdrawn from a private collection - Rare model produced by the Master of Defense around 2001 - Excellent condition. Never resharpened - Without original box - Checked and certified by our internal laboratory Coltelleria Collini.

Tactical / EDC knife manufactured in the late 1990s and designed by martial arts expert Michael Janich,

Master of Defense, an eclectic American brand no longer in business and later taken over by Blackhawk! Blades, produced various tactical and military type folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.

The only copy at our disposal, without box, very rare and out of production for many years.

Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel
Handle: Aviation aluminum with Kraton anti-slip inserts
Blade length: 86mm.
Blade thickness: 3.5mm.
Closed length: 112mm
Total length: 200mm.
Thick when closed: 13mm
Weight: 120g.
Closure: Liner Lock
Clip: removable, in stainless steel
Packaging:

Knife collected from private collection - 2014 model entirely handmade by Allen Elishewitz - Like new, original sharpening - Supplied with nylon pouch with velcro - Checked and certified by our internal laboratory Coltelleria Collini.

Intended use: Collection 

Kind of production: Handmade
Country of production: USA
Blade: handcrafted and beveled, in CTS-C75P stainless steel (Latrobe BG-42)
Blade treatment: handmade satin finish with Allen Elishewitz golden punch
Handle: titanium liners "crushed ice" with carbon fiber and copper grips with handmade bronze bolsters
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total lenght: 223mm.
Thickness when closed: 16mm.
Weight: 199g.
Closure: Liner Lock
Clip: Removable, inegral carbon fiber
Notes: Entirely handcrafted by Allen Elishewitz - 2014 model, like new - from private collector - Supplied with nylon velcro pouch.

Withdrawn from a private collection and out of production for years - with original box and certificates - in like new condition - Checked and certified by our in-house laboratory.

Intended use: Sports / Collection

Type of production: Semi-Industrial
Production Lama: Italy
Blade: Elmax 60 / 61HRC steel
Blade treatment: -
Handle: Titanium and G10
Blade length: 90mm.
Blade thickness: 4.5mm.
Total length: 207mm.
Thick when closed: 9mm.
Balancing: -
Weight: 168g.
Closure: Frame Lock with Rotoblock safety system
Clip: removable and reversible, in stainless steel
Sheath: -
Packaging: with Spyderco logo
Note:

more information: https://www.spyderco.com/catalog/details.php?product=908

Rare model produced by Gerber until 2003 - Knife taken from private collection - Overall in excellent condition, complete with original box and certificates - Checked, certified by our internal laboratory Coltelleria Collini.

Intended use: Tactical/Military

Blade: Stainless steel 154CM
Blade production USA
Handle: G10 with titanium folders
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 200mm.
Balance: -
Weight: 105g.
Closure: Liner Lock
Clip: Steel
Scabbard: -
Notes: -

Retired from rivata collection - Rare Rockstead model produced in 2009 in SANMAI ZDP189 and ATS34 steel - the temper of this piece has reached a rare hardness of 67.4 hrc - Knife in like new condition.

Checked and certified by our internal laboratory - Collini Cutlery.

The best industrial knives currently in production are currently marketed under the Rockstead brand, of Ishida Co. of Sakai, Japan.

Created by Katsumi Kitano, who has been producing quality knives for over 20 years so as to have been awarded the highest recognition among artisan cutlers in Japan, they prove to be exceptional both in cutting capacity, penetration and edge retention and in terms of innovation for materials used and for the construction techniques.

Blade: SanMai ZDP189 and ATS-34 stainless steel at 67.4 HRC
Handle: Same (real stingray leather) and aircraft aluminum with black alumite treatment at Hv400
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closure: Liner Lock in 402J2 steel at 52HRC
Clip: 402J2 to 52HRC steel
Notes: Accompanied by a guarantee certificate with technical specifications.

Knife taken from a private collection - Like new condition - Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Sports

Type of production: Industrial
Blade production: Japan
Blade: VG10 stainless steel
Blade treatment: -
Handle: Glass fiber reinforced with Nylon (FRNR)
Blade length: 79mm.
Blade thickness: 2mm.
Length closed 114mm.
Total length: 192mm.
Balancing: -
Weight: 71g.
Closing: Back Lock
Clip: removable, stainless steel
Sheath: -
Packaging:
Note: -

Collector's knife from a private collection - Daghetta model made by the famous Italian knifemaker Max around the early 2000s - Like new condition - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Collection / Gentleman

Type of production: Artisan
Lama production: Italy
Blade: Damasteel 61/62 Hrc damascus steel
Blade treatment: -
Handle: damasteel damask bolster, carbon fiber with titanium liners
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 129g.
Closing: Liner Lock
Clip: in damasteel damask
Sheath: -
Notes: ONE PIECE - custom knife handcrafted by Max

Massimiliano Salice Sanna, called Max is a master knife maker "of the first hour", active for a quarter of a century. Specialized in the construction of folding knives, he is constantly looking for new materials and innovative techniques. Max is a master of the Italian guild of knife makers, born in 1958, a Roman by birth and a Tuscan by adoption.

Intended use: Collection

Type of production: Artisan by Maestro CIC Sergio Consoli
Lama production: Italy
Blade: full-tang in RWL-34 60 / 61HRC stainless steel
Blade treatment: -
Handle: carbon fiber
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 138g.
Closing: Liner Lock
Clip: carbon fiber
Sheath: -
Packaging:
Notes: Handmade by Maestro Sergio Consoli - knife number 271 made in 2009

Acknowledgments

I currently make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:

in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded the "best table on display"

always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"

moreover, I ranked second in the competition organized by LAME D'AUTORE magazine as the best fixed hunting blade

then in 2007 at "Scarperia" I won the third prize as the best closable

but above all again in 2007, I achieved, to my great satisfaction, the level of MASTER OF ITALIAN COLTELLINAI CORPORATION, recognition received at the first exam taken.

Presentation of the craftsman

Creating a hand knife is what I consider a real art form.
The satisfaction of seeing an object that comes from your own hands, that takes shape and that reaches mechanical, artistic and aesthetic perfection is what pays me more for all the hours of work and effort it takes to create a knife completely by hand.

The passion for "cutting irons" has always been in me since I was a child and has grown with me until the almost sudden decision to build my first knife on my own, it was a "need", almost an inner need that I couldn't put it off, my hands and my mind had to start creating, of course what I had always been passionate about ... the knife!

I started at 40, in 2003, practically self-taught, I had no manual work experience, but I had been a mechanical designer for many years and this allowed me to know perfectly the technique and all the various stages of mechanical processing.

Currently I am a member, with the rank of Maestro, which is the highest, of the Italian Knifemakers Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.

What I do now is what I consider my art form ..., to create "handmade, hunting and collectible knives".

They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I make above all folding knives, which satisfy more my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they cannot be seen, is what distinguishes a hand-made knife from an industrially made one .

The mechanics must then be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.

Of course, over the years I have refined my technique and currently I have improved even more the mechanics by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction and with an incredible sweetness.

With regard to the blades, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow exceptional wire holding and cutting quality for all types of use.

Pathically I make all the knives on my initial design, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "handmade".

Regarding the materials that I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damask, both stainless steel and carbon, for the uniqueness 'that they donate to the knife, since each damask is always different from another.

For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of colors, all beautiful, I also use the fossil ivory of mammoth, various briars, titanium and carbon fiber.

Most of the knives, however, are made entirely of steel, in order to then be engraved, always and rigorously by hand, to transform the knife even more into a real work of art ...

Knife withdrawn from a private collection - Rare model produced by Spyderco to commemorate New York police officer John D'allara who died when he entered the World Trade Center on September 11, 2001 - no longer in production since 2005 - Like new condition - With original box - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Sports

Type of production: Industrial
Blade production: Japan
Blade: VG10 Stainless Steel
Handle: FRN with drowned stainless steel folders
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 203mm.
Weight: 164g.
Closing: Spyderco’s Ball Bearing Lock
Clip: stainless steel
Packaging: with box
Notes: -

Collector's knife from a private collection - Model TTFF1 by Medford with custom Black Blood treatment and black coating of the sleeve by Dino Picco by Wander Tactical - Excellent condition with original box - Regrinded - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Tactical / Collection

Type of production: Custom
Blade production: Usa
Blade: D2 steel
Blade treatment: -
Handle: aluminum and titanium
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 245mm.
Thick when closed: 13mm.
Balancing: on the guard branch
Weight: 252g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packaging: polymer tactical case with Medford logos
Notes: Designed and built by Greg Medford - Black Blood blade treatment and handle repainted by Wander Tactical designer Dino Picco

Knife withdrawn from a private collection - Like new condition: never used, never re-sharpened, never carried in pocket, perfect in every detail. Without original box. - Checked and certified by our Collini Cutlery internal laboratory.

Intended use: Sports

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: satin finish
Handle: carbon fiber
Blade length: 77mm.
Blade thickness: 2.7mm.
Length closed 114mm.
Total length: 181mm.
Thick when closed: 17mm.
Weight: 92g.
Closing: Liner Lock
Clip: removable, multi-position, in stainless steel
Packaging: absent
Notes: knife from private collection, like new, without box

Intended use: collection

Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin finish
Handle: titanium and carbon fiber
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm
Balancing: -
Weight: 94g.
Closure: Liner Lock
Clip: in titanium
Sheath: -
Notes: production early 2000s, withdrawn from a private collection

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: China
Blade: in steel tool D2
Blade treatment: Satin finish
Handle: in G10, frame and spacer in titanium
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 114mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 110g.
Opening: through a slot cut on the blade
Washers: brass
Closure: liner lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: Cardboard box with Steel Will Knives logos
Notes: Design by Tommaso Rumici

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: China
Blade: in steel tool D2
Blade treatment: Blackwashed
Handle: in G10, internal stainless steel liners, titanium spacer
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 114mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 98g.
Opening: through a slot cut on the blade
Washers: brass
Closure: liner lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: Cardboard box with Steel Will Knives logos
Notes: Design by Tommaso Rumici