Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Ka-Bar - 6417 Red Spacer knife - 1095 steel - Special Edition - coltello
Il Red Spacer KA-BAR è probabilmente il coltello KA-BAR più collezionabile realizzato durante la seconda guerra mondiale. Il distintivo distanziatore rosso presente sotto la guardia ha attirato l'attenzione dei collezionisti per decenni. Sebbene gli originali siano rari e costosi, il laboratorio State & Union di KA-BAR - che si occupa delle realizzazioni custom - ha realizzato un piccolo lotto di questo iconico coltello.
Le rondelle in pelle sono modellate a mano per creare un aspetto invecchiato. Il fondello e la guardia sono lavorate artigianalmente per replicare le forme e le dimensioni dell'originale.
Ogni distanziatore rosso è fatto a mano per essere leggermente più lungo dell'attuale distanziatore utilizzato sui coltelli da combattimento/utilità KA-BAR. La lama viene sabbiata, quindi trattata a freddo.
Il fodero subisce un processo di invecchiamento per scurire la pelle e far corrispondere il colore del fodero originale.
Destinazione d'uso: Tattico/Militare
Lama: in acciaio al carbonio 1095 56/58HRC
Manicatura: anelli di cuoio
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 290mm.
Bilanciatura: arretrata - 1 cm. dal ramo di guardia inferiore
Peso: 305g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: -La Coltelleria Collini di Busto Arsizio è distributore ufficiale per l'Italia del marchio KA-BAR
KB-6417 -
Ka-Bar - IFB Trail Point Fixed Blade - 5351 - knife
Intended Use: Light Utility
Production type: industrial
Country of Production: China
Blade: full tang, stainless steel 8Cr13MoV
Blade finish: Powder coated
Handle: G10
Blade length: 152mm.
Blade thickness: 4mm.
Total length: 286mm.
Weight: 280g.
Sheath: ABS with belt clip system, M.O.L.L.E. compatible.
Notes: -KB-5351 -
Ka-Bar - IFB Drop Point Fixed Blade - 5350 - knife
Intended Use: Light Utility
Production type: industrial
Country of Production: China
Blade: full tang, stainless steel 8Cr13MoV
Blade finish: Powder coated
Handle: G10
Blade length: 122mm.
Blade thickness: 4mm.
Total length: 254mm.
Weight: 275g.
Sheath: ABS with belt clip system, M.O.L.L.E. compatible.
Notes: -KB-5350 -
Ka-Bar - USSF Space Force Corser Folder Knife 5698SF - Blue GFN - knife
Intended Use: Sporting / Collection
Country of Production: Taiwan
Blade: AUS 8A stainless steel with Gray Powder Coat treatment
Handle: GFN-PA66
Blade Length: 89mm.
Blade thickness: 2.8mm.
Length closed: 114mm.
Total length: 204mm.
Weight: 95g.
Closure: Back Lock
Opening: One-handed, through pivot on the blade
Clip: steel, removable, ambidextrous
Package: cardboard box with Ka-Bar logosKB-5698SF -
Ka-Bar BK&T - Becker Magnum Camp Knife - BK5 - knife
Intended use: Hiking / Heavy Utility
Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Black Traction Coating
Handle: Zytel
Blade length: 203mm.
Blade thickness: 5mm.
Total length: 343mm.
Weight: 337g.
Sheath: ABS and Nylon
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan BeckerCollini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KA-BK5 -
Ka-Bar - Modified Tanto Fixed Blade Knife - 1266 - Kydex Sheath - knife
Intended use: Tactical / Military / Collection
Intended use: Tactical / Military / Collection
Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 20.3 mm.
Blade thickness: 4.2 mm.
Total length: 32.4 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logosCollini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-1266 -
Ka-Bar - U.S. ARMY - Fighting Knife - 1219 - knife
Similar to the most famous and best-selling model 1217 USMC, the model 1219 differs in the use of the U.S. LOGO. ARMY engraved on the blade and on the sheath and with the partially serrated blade.
The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.
Intended use: Tactical / Military
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: leather
Note: -KB-1219 -
Ka-Bar - Dozier Folding Hunter knife 4062FG - Green Zytel Handle - knife
Intended use: tactical
Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steelDesign: by Bob Dozier
Production: TaiwanKB-4062FG -
Ka-Bar - Bowie Knife 1236 leather sheath - knife
Intended use: sports
Blade: 4116 stainless steel 57 hrc
Handle: leather rings
Blade length: 175mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 295 mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 200g.
Closing: -
Clip: -
Sheath: in leather
Note: -KB-1236 -
Ka-Bar - USMC 9191 Commemorative 120th Anniversary - Fighting Knife - knife
From KA-BAR regarding the special engraved logo: The engraved logo features the historical "The Union" logo from the early 1900s, a bear, and the years marking 120 years - 1898 and 2018.
The significance of the bear is in the KA-BAR name itself. An Alaskan hunter was attacked by a Kodiak bear, but successfully defended himself using his Union Cutlery knife. The hunter was so thankful that he sent a letter describing the ordeal with "K a Bar" (Kill a Bear) as well as sending in the bear fur. The officers of Union Cutlery decided to adopt KA-BAR as a trademark in 1924.Intended use: Tactical / Military
Production: U.S.A.
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: in leather
Note: -KB-9191 -
Nepal kukri - Sirupate 15 - WITH ENGRAVING - wooden handle - Nepali Knife
Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood
Finishes: Brass
Blade length: 250 mm.
Blade thickness: 10 mm.
Total length: 380 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 468g. (602g with scabbard)
Sheath: in leather and wood
Notes: Original Nepalese knife entirely handmadeSIRU-15-INCISO -
Artisan Kukri - Long 18 - WITH ENGRAVING - Nepalese knife
Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.
Blade: Carbon steel, with incisions
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood engraved
Finishes: Brass
Blade length: 160 mm.
Blade thickness: 8 mm.
Overall length: 280 mm.
Karda: 55 mm.
Chakmak: 55 mm.
Weight: 224g. (308g inclusive sheath)
Sheath: engraved wood and brass
Notes: Original Nepalese knife entirely handmadeL18-INC -
Ka-Bar - John Ek Commando Knife Model 5 - EK45 - knife
Target: Tactical / Military
Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflonatura
Manicure: FRN (fiberglass reinforced nylon)
Blade length: 174mm.
Blade thickness: 4mm.
Total length: 328mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 300g.
Sheath: in Celcon (ABS)KB-EK45 -
Ka-Bar - Neck Knife - 1117 - Knife
Intended use: Tactical / Utility
Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade Treatment: Black Coating
Handle: -
Blade Length: 98mm.
Blade thickness: 3.1mm.
Total length: 200mm.
Balance: advanced, 1 cm from the lower guard branch
Weight: 68g.
Sheath: ABS, neck, compatible M.O.L.L.E.
Packing: Cardboard box with Ka-Bar logos
Note: -KB-1117 -
Ka-Bar - Snody Big Boss - 5102 - Knife
Purpose of use: Outdoor / Utility
Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade Treatment: Satin
Handle: Zytel interchangeable in Blue Reptile or Purple Dolla Holla
Blade Length: 116mm.
Blade thickness: 4.8mm.
Overall length: 228mm.
Balance: backward, 1 cm from the lower guard branch
Weight: 181g.
Sheath: in leather
Packing: Cardboard box with Ka-Bar logos
Notes: Design by Mike Snody - Schmuckatelli Coat Powder Coat - Coordinated ParacordKB-5102 -
Ka-Bar - Jarosz Globetrotter Tactical Knife - 7502 - knife
Intended use: Tactical / Utility
Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade Treatment: Black Coating
Handle: Ultramid
Blade Length: 89mm.
Blade thickness: 4.2mm.
Overall length: 192mm.
Balance: backward, 2 cm from the lower guard branch
Weight: 181g.
Sheath: in Nylon, compatible with M.O.L.L.E.
Packing: Cardboard box with Ka-Bar logos
Notes: Design by Jesse JaroszKB-7502 -
Ka-Bar - Jarosz Turok Tactical Knife - 7503 - knife
Intended use: Tactical / Utility
Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflon coated
Handle: Ultramid
Blade Length: 155mm.
Blade thickness: 5mm.
Total Length: 287mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 338g.
Sheath: kydexKB-7503 -
Nepal kukri - Sirupate 16 wooden handle - Knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Manicure: wood
Finishes: Brass
Blade length: 260 mm.
Blade thickness: 9.4 mm.
Total length: 400 mm.
Karda: 110 mm.
Chakmak: 110 mm.
Weight: 426g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by handne-siru-16 -
Ka-Bar - Dog's Head Utility Knife - 1317 - knife
Intended use: Tactical / Utility
Blade: 1095 carbon steel 56 / 58HRC
Country of Origin: USA
Finish: Teflon coating
Handle: Leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Sheath: LeatherKB-1317 -
Nepal kukri - Sirupate 17 wooden handle - knife
Lame: acier au carbone
Conformation: Dui Chirra
Kauri: Découverte
Aunlo-Bal: des motifs en noir et or gravé d'un dessin d'un soleil
Poignée: Bois
Finitions: laiton
Longueur de la lame: 225 mm.
Épaisseur de la lame: 8,5 mm.
Longueur totale: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Poids: 350g.
Gaine: cuir et bois
Notes: couteau d'origine népalaise fait entièrement à la mainne-siru17 -
Kukri nepal - Nepal Army 007 horn handle - knife
Blade: Carbon Steel
Handle: horn
Blade length: 225 mm.
Blade Thickness: 10 mm.
Overall length: 350 mm.
Weight: without covers g. 375 - g with sheath. 504
Sheath: leather and wood, handmade
Notes: every knife and 'entirely handmade in Nepal and also includes two small knives.ne-army-c -
Kukri nepal - Dhankute 16 wooden handle 010 - Knife
Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: Wood
Finishes: Brass
Blade length: 270 mm.
Blade Thickness: 10 mm.
Overall length: 400 mm.
Karda: 105 mm.
Chakmak: 105 mm.
Weight: 434g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by handne-dhan16 -
Nepal kukri - Sirupate 15 wooden handle 009 - Knife
Lame: acier au carbone
Conformation: Dui Chirra
Kauri: Découverte
Aunlo-Bal: des motifs en noir et or gravé d'un dessin d'un soleil
Poignée: Bois
Finitions: laiton
Longueur de la lame: 225 mm.
Épaisseur de la lame: 8,5 mm.
Longueur totale: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Poids: 350g.
Gaine: cuir et bois
Notes: couteau d'origine népalaise fait entièrement à la mainne-sir-15 -
Kukri nepal - Balance 006 wooden handle - knife
Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: engraved patterns in black and gold with a drawing of a sun
Handle: Wood
Finishes: Brass
Blade length: 225 mm.
Blade Thickness: 8.5 mm.
Overall length: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 350g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by handne-bal-l -
Ka-Bar - USMC Vietnam Military Knife K-9140 - Knife
Ka-Bar - USMC Vietnam Military Knife K-9140 - Knife
Intended Use: collectionBlade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
closed length: -mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Closed: -
Clip: -
Sheath: Leather
Notes: Limited EditionKB-9140 -
Kukri Artisan - Panawal wood - Nepalese knife
Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Covered
Aunlo-Bal: -
Handle: Wood
Blade length: 230mm.
Blade Thickness: 11mm.
Overall length: 395mm.
Karda: horn length. tot. 12mm.
Chakmak: horn length. tot. 12mm.
Weight: 690g.
Sheath: wood and leather
Notes: Nepalese original knife made entirely by handPANA21 -
Kukri Artisan - Panawal horn - Nepalese knife
Kukri Artisan - Panawal horn - Nepalese knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade thickness: 9mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 482g.
Sheath: wood and leather
Notes: Original Nepalese knife made entirely by handPANA22 -
Kukri Artisan - Ganjawala multipurpose horn 18 - Nepali knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade Thickness: 8mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 434g.
Sheath: wood and leather decorated
Notes: Knife Original Nepalese entirely handmade - 7 accessories included in the sheathGAN18 -
Kukri Artisan - Dhankute Silver - Nepalese knife
Kukri Artisan - Dhankute Silver - Nepalese knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn and silver
Blade length: 320mm.
Blade Thickness: 10mm.
Overall length: 440mm.
Karda: length. tot. 6.3mm.
Chakmak: length. tot. 6.3mm.
Weight: ì (774g. Sheath)
Sheath: horn and Nepalese symbols silver
Notes: Original Nepalese knife made entirely by handDHAN2 -
Kukri Artisan - Dhankute 11 "horn - Nepalese knife
Kukri Artisan - Dhankute 11 "horn - Nepalese knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn and brass
Blade length: 220mm.
Blade Thickness: 8mm.
Overall length: 340mm.
Karda: horn length. tot. 65mm.
Chakmak: horn length. tot. 65mm.
Weight: 434g.
Sheath: Nepalese brass horn with symbols
Notes: Original Nepalese knife made entirely by handDHAN11 -
Kukri Artigianale - Bahadur Gripper corno - coltello nepalese
Lama: Acciaio al carbonio
Conformazione: Lama full tang
Kauri: Scoperto
Aunlo-Bal: singola linea nera incisa
Manicatura: Corno nero di bufalo
Finiture: -
Lunghezza lama: 250 mm.
Spessore della lama: 6 mm.
Lunghezza totale: 375 mm.
Peso: 680g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a manoBAHA20 -
Kukri Artisan - Chainpure 13 - Nepalese knife
Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.
Blade: Carbon steel, with incisions
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood engraved
Finishes: Brass
Blade length: 160 mm.
Blade thickness: 8 mm.
Overall length: 280 mm.
Karda: 55 mm.
Chakmak: 55 mm.
Weight: 224g. (308g inclusive sheath)
Sheath: engraved wood and brass
Notes: Original Nepalese knife entirely handmadeCHAIN13 -
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by handCHAIN15 -
Ka-Bar BK&T Esee - EsKaBar BK14 - knife
Use: Neck Knife
Blade: 1095 carbon steel 56/58 HRC
Handle: Paracord
Blade length: 83mm.
Blade Thickness: 4mm.
Length closed: -
Overall length: 177mm.
Balancing: -
Weight: 68g.
Sheath: ABS
Notes: 2m including paracord - Developed in cooperation with Ka-Bar Becker Knives & Tools and ESEE KnivesKB-BK14 -
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by handKU027 -
Ka-Bar - USMC Never Forget - September 11, 2001 - 02-9128 - knife
Ka-Bar - USMC Never Forget - September 11, 2001 - 02-9128 - knife
Intended use: collection
Blade: carbon steel 1095 56/58HRC
Handle material: leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Length closed:-mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Closure: -
Clip: -
Sheath: Leather
Notes: Limited Edition9164 -
Ka-Bar BK&T - Becker Crewman BK10 knife - knife
Ka-Bar BK & T - Becker Crewman BKR10 - knife
Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .
Steel: 1095 56/58 HRC
Length of the blade: 135 mm.
Blade Thickness: 5 mm.
Overall length: 280 mm.
Weight: 330 g.KB-BK10 -
Kukri Artigianale - World War II Gurkha wood knife
Kukri - World War II Gurkha
Arma nazionale del Nepal e dei suoi guerrieri Gurkha, si distingue per la sua lama ricurva affilata nel latoconcavo e per lo spostamento del peso verso la punta che consente fendenti molto efficaci. L’impugnatura è diritta, senzaguardia. Caratteristico il ricasso (kauri) e il fodero di legno ricoperto di cuoioin cui sono contenuti anche due piccoli coltelli (karda e chakmak).
Lama: Acciaio al carbonio
Manicatura: Legno - ATTENZIONE, trattandosi di un prodotto artigianale la colorazione del manico può variare rispetto al modello fotografato
Lunghezza lama: 250 mm.
Spessore della lama: 11 mm.
Lunghezza totale: 405 mm.
Peso: -- g.
Fodero: in cuoio con trattamento camouflage e legno, realizzato a mano
Note: ogni coltello e' interamente realizzato a mano in Nepal e comprende anche due piccoli coltelli.3598C -
Ka-Bar - Zombie Killer Chop Stick - 02-5704 - coltelli
Destinazione d'uso: collezione/sportivo
Tipo di produzione: industriale
Lama: in acciaio al carbonio SK-5
Trattamento Lama: teflonata
Manicatura: Forprene
Lunghezza lama: 230mm.
Spessore della lama: 5.5mm.
Lunghezza chiuso: -
Lunghezza totale: 370mm.
Bilanciatura: avanzata di 4cm dalla guardia
Peso: 568g.
Chiusura: -
Clip: -
Fodero: tattico in Cordura
Note: Coltello fisso di backup scheletrato, modello Ka-Bar Acheron, che trova spazio nella tasca frontale del fodero. Il coltello fornito con paracord di colore verde acido e di due guancette intercambiabili di colore nero5695 -
Crafty Kukri - Jungle knife 001 - knife
Kukri - Gurkha Army
Nepal's national weapon and its Gurkha warriors are distinguished by their sharp curved blade in the lathe and the weight shift towards the tip that allows very effective gaiters. The grip is straight, no guard. Characteristic is the ricotta (kauri) and the leather sheath covered with two small knives (karda and chakmak).
Blade: Carbon steel
Manicure: black polished horn
Blade length: 265 mm.
Blade thickness: 10 mm.
Total length: 390 mm.
Weight: g.
Sheath: leather and wood, handmade
Notes: Every knife is handmade in Nepal and also includes two small knives.3600 -
Ka-Bar - Desert Fighting Knife - 02-5014 coltello
Destinazione d'uso: tattico/militare
Tipo di produzione: industriale
Provenienza Lama: USA
Lama: in acciaio 1095 56/58HRC
Trattamento Lama: teflonatura
Manicatura: Kraton G
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 300mm.
Bilanciatura: arretrata a 1.5cm
Peso: 300g.
Chiusura: -
Clip: amovibile e reversibile in acciaio inox
Fodero: polimeri
Note: -5683 -
Ka-Bar - Impact Serie Large Spear/Eagle - 02-1461 coltello
Destinazione d'uso: tattico/militare
Tipo di produzione: industriale
Provenienza Lama: USA
Lama: in acciaio D2
Trattamento Lama: teflonatura
Manicatura: micarta
Lunghezza lama: 110mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 245mm.
Bilanciatura: arretrata a 2cm
Peso: 240g.
Chiusura: -
Fodero: cordura
Note: -5688 -
Ka-Bar - Large Heavy Bowie - 02-1277 coltello
Destinazione d'uso: militare/sportivo
Tipo di produzione: industriale
Lama: in acciaio al carbonio 1085
Trattamento Lama: teflonata
Manicatura: Forprene
Lunghezza lama: 230mm.
Spessore della lama: 5.5mm.
Lunghezza chiuso: -
Lunghezza totale: 370mm.
Bilanciatura: sul ramo di guardia
Peso: 450g.
Chiusura: -
Clip: -
Fodero: tattico in Cordura
Note: -5686 -
Ka-Bar - Machete - 02-1279 coltello
Destinazione d'uso: militare/sportivo
Tipo di produzione: industriale
Lama: in acciaio al carbonio 1085
Trattamento Lama: teflonata
Manicatura: Kraton G®
Lunghezza lama: 350mm.
Spessore della lama: 4mm.
Lunghezza totale: 490mm.
Bilanciatura: avanzata a 85mm dalla guardia
Peso: 566g.
Fodero: in Cordura
Note: -5694