Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Citadel - Fidel Buffalo Slipjoint Knife - 207CR - handmade knife
Intended use: collectible/sporting
Type of production: Handcrafted
Blade Production: Cambodia
Blade: DNH7 carbon steel selective hardening 40/60HRC
Blade Finish: mirror polished
Handle: water buffalo horn
Blade length: about 80mm.
Blade thickness: about 3mm.
Length closed: about 113m.
Total length: about 190mm.
Thickness when closed: about 17mm.
Balance: -
Weight: about 58g.
Closure: -
Clip: -
Sheath: leather pouch
Packaging: -
Notes: each knife is handmade and differs minimally in size, weights and aestheticsCI-207CR -
Rockstead - HIGO II X-FCF - ZDP-189 & Dark Matter Gold Carbon Fiber - folding knife
Higo is one of the most beloved models for Rockstead Knives fans around the world, and HIGOⅡX, with a custom Dark Matter Gold (DMG) carbon fiber coating and a titanium back layer, is one more step in the pursuit of perfection. The blade is made of ZDP189 super stainless steel and features a unique convexity with gradually reduced angle (30 degrees at the middle and 24 degrees at the tip). The variable blade angle is the result of Rockstead's long quest for superior sharpness and cutting ability.
Blade: ZDP-189 stainless steel at 66.7HRC
Handle: anodized titanium and Dark Matter Gold carbon fiber
Blade length: 89mm.
Blade thickness: 3.2mm.
Total length: 216mm.
Weight: 138g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Accompanied by warranty certificate with full technical specificationsRO-HIGIIX-ZDPDMG -
Rockstead - Shin - Clad ZDP189 & Aluminum and Samekawa - folding knife
With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.
Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.
Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
Blade length: 95 mm.
Blade thickness: 4 mm.
Overall length: 210 mm.
Weight: 145 g.
Lock: Liner Lock steel in 52HRC 402J2
Clip: Steel 402J2 to 52HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.RO-SHIN-ZDP -
Rockstead - Hizen - DLC YXR7 & Duralumin - Folding Knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: in Hitachi YXR7 steel at 64HRC
Blade treatment: Black DLC mirror
Handle: A7075 Duralumin with Hv400 hardness anodizing
Blade length: 70mm.
Blade thickness: 3.3mm.
Length closed: 104mm.
Total length: 176mm.
Thick when closed: 11.4mm.
Weight: 74g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel of 1mm. with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: -RO-HIZ-DLC -
Rockstead - Hizen - ZDP-189 & Duralumin - Folding Knife made in Japan
Blade: stainless steel ZDP-189 to 67.2HRC
Handle: Duralumin A2024 with anodized surface to HV400
Blade length: 73 mm.
Blade Thickness: 3.5 mm.
Overall length: 176 mm.
Weight: 172 g.
Lock: Frame Lock with a swing in SKD11 61HRC
Clip: Steel 402J2 to 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.RO-HIZ-ZDP189 -
Rockstead - 2010 Higo-MH-DLC Serial #303 - YXR7 HPC & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory
The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.
Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HIMHDLC-CP -
Rockstead - 2010 Higo-ST Serial #005 - YR7 HPC & Duralumin - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.
The best industrial knives currently in production are marketed under the Rockstead brand. Created by Katsumi Kitano, who has been making quality knives for more than 20 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in the level of innovation for the materials used and construction techniques.
Country of production: Japan
Type of production: midtech
Blade: Hitachi YXR7 steel at 64.8HRC with 3micron HPC coverage and hardness of Hv1800
Handle: Duralumin A2024 with surface anodizing and hardness of Hv400
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 130g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Serial number 005 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HISTHPC-CP -
Rockstead - CHI ZDP - Shinogi Zukuri Clad Steel SanMai ZDP189 - knife made in Japan
Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.
Intended Use: Collection/Sportsman
Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpeningR-CHIZDP -
Citadel - Lancha Rayskin White knife - handmade knife
Intended use: sports / collection
Type of production: Artisan
Production Lama: Cambodia
Blade: in DNH7 carbon steel with 40 / 60HRC selective hardening
Blade treatment: -
Handle: stingray leather
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 25mm.
Balancing: -
Weight: 188g.
Closure: liner lock
Clip: -
Sheath: cordura bag
Packaging: -
Note: -AP-CIT-LRW -
Citadel - Rossignoli Folder Big - friction folding knife - craft knife
Intended use: sports / collection
Type of production: Artisan
Production Lama: Cambodia
Blade: in DNH7 carbon steel with 40 / 60HRC selective hardening
Blade treatment: -
Handle: Water Buffalo Horn
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 137mm.
Total length: 205mm.
Thick when closed: 23mm.
Balancing: -
Weight: 146 g.
Closure: folding with friction
Clip: -
Sheath: Cordura bag
Packaging: -
Note: -CD4211 -
Citadel - Nordic hunter knife - 288 - craft knife
Citadel - Nordic
These handmade knives are distinguished by their original but functional line, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The knife is then polished and sharpened by hand on stone and finished in every single detail.Blade: DNH7 "Bruit de forge" selective hardening 40/60 HRC steel with file-worked spine
handle: In wood with brass guard
Blade length: 70 mm.
Handle length: 115 mm.
Blade thickness: 3.5 mm.
Total length: 195 mm.
Sheath: Handmade brown leather
Weight: 154 g.CI-NORDIC -
Citadel - Japanese Aikuchi - Special Salamander - craft knife
aikuchi
processing
The blades are carbon-hardened to a hardness of about 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (breed skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 170mm. (including habaki)
Total length: 275mm.
Weight: 210g. without sayaNote: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.
CI-AI-SAL -
Rockstead - Higo II F-HTI-ZDP - Titanium ZDP-189 - knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and tightness of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.5HRC
Blade treatment: mirror polished
Handle: titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 12.2mm.
Weight: 136g.
Opening: through ambidextrous pin
Washers: in brass
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 096 - Date of production 05 July 2019HIGOIIHTIZ -
Rockstead - Shin knife DLC - YXR7 - knife
This knife blade is convex on both sides in the tradition of the highly praised Japanese sword. This shape is both sharp and strong, and can still slice cleanly through a sheet of paper even after the punishment of chopping and cutting through dried bamboo. Using this special blade shape is an excellent way of allowing an edge to be thick without sacrificing any of its sharpness. This knife is of preeminent sharpness. This is a durable knife with strong cutting capabilities that will last for a long time. Even when used for rigorous cutting, the blade will not bite or catch thanks to its convex shape. Other knives will often bite or catch, and may acquire nicks if pulled out suddenly.
Blade: XR-7 steel at 64.3 HRC with DLC treatment
Handle: Same (real breed leather) and aeronautical aluminum with Hv400 black alumite treatment
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closing: Liner Lock in 402J2 steel at 52HRC
Clip: in 402J2 steel at 52HRC
Notes: Accompanied by a warranty certificate with technical specifications.RS-SHIN-B -
Rockstead - Higo II X-CF-ZDP - Carbon Fiber ZDP-189 - knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: anodised titanium and carbon fiber
Blade length: 89mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 133g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 028 - Date of production April 23, 2019HIGOIIXCF -
Rockstead - Chou HPC - Black Silk - neck knife
With the Rockstead brand, of Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently being marketed.
Created by Katsumi Kitano, who has been producing quality knives for over 20 years, to the extent that they have been awarded the highest recognition among the artisanal cutlers in Japan, they prove to be exceptional both in cutting, penetration and thread strength and in terms of innovation for the materials used and for construction techniques.
Blade: Hitachi YXR7 65HRC steel with HPC titanium cover
Handle: interweaving in silk tied by hand
Blade length: 45 mm.
Blade thickness: 4 mm.
Total length: 120 mm.
Weight: 60 g.
Sheath: neck, in Kydex
Notes: Accompanied by silk bag and certificate of guarantee with technical specifications.4069BLACK -
Nepal kukri - Sirupate 15 - WITH ENGRAVING - wooden handle - Nepali Knife
Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood
Finishes: Brass
Blade length: 250 mm.
Blade thickness: 10 mm.
Total length: 380 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 468g. (602g with scabbard)
Sheath: in leather and wood
Notes: Original Nepalese knife entirely handmadeSIRU-15-INCISO -
Artisan Kukri - Long 18 - WITH ENGRAVING - Nepalese knife
Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.
Blade: Carbon steel, with incisions
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood engraved
Finishes: Brass
Blade length: 160 mm.
Blade thickness: 8 mm.
Overall length: 280 mm.
Karda: 55 mm.
Chakmak: 55 mm.
Weight: 224g. (308g inclusive sheath)
Sheath: engraved wood and brass
Notes: Original Nepalese knife entirely handmadeL18-INC -
Nepal kukri - Sirupate 16 wooden handle - Knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Manicure: wood
Finishes: Brass
Blade length: 260 mm.
Blade thickness: 9.4 mm.
Total length: 400 mm.
Karda: 110 mm.
Chakmak: 110 mm.
Weight: 426g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by handne-siru-16 -
Rockstead - TEI DLC - 65hrc - knife collection
This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.
Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: FolderRO-TEI -
Rockstead - Chou HPC Ironwood - Neck Knife - Knife
With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.
Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.
Use: utility / Neck KnifeProduction Country: Japan
Blade: stainless Hitachi YXR7 to 65HRC
Finish: HPC titanium
Handle: Ironwood
Blade length: 45 mm.
Blade thickness: 4 mm.
Overall length: 120 mm.
Weight: 60 g.
Sheath: neck, Kydex thermoformed
Notes: Accompanied by a certificate of guarantee with technical specifications4069IW -
Nepal kukri - Sirupate 17 wooden handle - knife
Lame: acier au carbone
Conformation: Dui Chirra
Kauri: Découverte
Aunlo-Bal: des motifs en noir et or gravé d'un dessin d'un soleil
Poignée: Bois
Finitions: laiton
Longueur de la lame: 225 mm.
Épaisseur de la lame: 8,5 mm.
Longueur totale: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Poids: 350g.
Gaine: cuir et bois
Notes: couteau d'origine népalaise fait entièrement à la mainne-siru17 -
Kukri nepal - Nepal Army 007 horn handle - knife
Blade: Carbon Steel
Handle: horn
Blade length: 225 mm.
Blade Thickness: 10 mm.
Overall length: 350 mm.
Weight: without covers g. 375 - g with sheath. 504
Sheath: leather and wood, handmade
Notes: every knife and 'entirely handmade in Nepal and also includes two small knives.ne-army-c -
Kukri nepal - Dhankute 16 wooden handle 010 - Knife
Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: Wood
Finishes: Brass
Blade length: 270 mm.
Blade Thickness: 10 mm.
Overall length: 400 mm.
Karda: 105 mm.
Chakmak: 105 mm.
Weight: 434g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by handne-dhan16 -
Nepal kukri - Sirupate 15 wooden handle 009 - Knife
Lame: acier au carbone
Conformation: Dui Chirra
Kauri: Découverte
Aunlo-Bal: des motifs en noir et or gravé d'un dessin d'un soleil
Poignée: Bois
Finitions: laiton
Longueur de la lame: 225 mm.
Épaisseur de la lame: 8,5 mm.
Longueur totale: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Poids: 350g.
Gaine: cuir et bois
Notes: couteau d'origine népalaise fait entièrement à la mainne-sir-15 -
Kukri nepal - Balance 006 wooden handle - knife
Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: engraved patterns in black and gold with a drawing of a sun
Handle: Wood
Finishes: Brass
Blade length: 225 mm.
Blade Thickness: 8.5 mm.
Overall length: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 350g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by handne-bal-l -
Citadel - Phan Theit Water knife - Friction folder Bufalo - handmade knife
Intended use: collection / sports
Type of production: Artisan
Production Lama: Cambodia
Blade: DNH7 carbon steel
Blade treatment: -
Handle: Water Buffalo Horn
Blade length: about 76mm.
Blade thickness: about 3mm.
Closed length: about 103mm.
Total length: about 180mm.
Thick when closed: about 15mm.
Balancing: -
Weight: about 120g.
Closure: without blade lock
Clip: -
Sheath: cordura bag
Packaging: -
Note: -CIT-PTW -
Rockstead - SHUN Titanium ZDP-189 by Sinkevich - knife
Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: acciaio laminato con guance esterne in VG10 e tagliente in ZDP-189 a 66/67HRC con finitura a specchio
Manicatura: Titanio anodizzato
Lunghezza lama: 105 mm.
Spessore della lama: 3,8 mm.
Lunghezza totale: 190 mm.
Peso: 159g.
Chiusura: Frame Lock con battente in acciaio inox
Clip: Deep pocket, amovibile, in acciaio inox SUS420J2 a 50HRC
Note: Design by Sinkevich - accompagnato da certificato di garanzia con specifiche tecniche dettagliate12431 -
Kukri Artisan - Panawal wood - Nepalese knife
Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Covered
Aunlo-Bal: -
Handle: Wood
Blade length: 230mm.
Blade Thickness: 11mm.
Overall length: 395mm.
Karda: horn length. tot. 12mm.
Chakmak: horn length. tot. 12mm.
Weight: 690g.
Sheath: wood and leather
Notes: Nepalese original knife made entirely by handPANA21 -
Kukri Artisan - Panawal horn - Nepalese knife
Kukri Artisan - Panawal horn - Nepalese knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade thickness: 9mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 482g.
Sheath: wood and leather
Notes: Original Nepalese knife made entirely by handPANA22 -
Kukri Artisan - Ganjawala multipurpose horn 18 - Nepali knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade Thickness: 8mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 434g.
Sheath: wood and leather decorated
Notes: Knife Original Nepalese entirely handmade - 7 accessories included in the sheathGAN18 -
Kukri Artisan - Dhankute Silver - Nepalese knife
Kukri Artisan - Dhankute Silver - Nepalese knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn and silver
Blade length: 320mm.
Blade Thickness: 10mm.
Overall length: 440mm.
Karda: length. tot. 6.3mm.
Chakmak: length. tot. 6.3mm.
Weight: ì (774g. Sheath)
Sheath: horn and Nepalese symbols silver
Notes: Original Nepalese knife made entirely by handDHAN2 -
Kukri Artisan - Dhankute 11 "horn - Nepalese knife
Kukri Artisan - Dhankute 11 "horn - Nepalese knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn and brass
Blade length: 220mm.
Blade Thickness: 8mm.
Overall length: 340mm.
Karda: horn length. tot. 65mm.
Chakmak: horn length. tot. 65mm.
Weight: 434g.
Sheath: Nepalese brass horn with symbols
Notes: Original Nepalese knife made entirely by handDHAN11 -
Kukri Artigianale - Bahadur Gripper corno - coltello nepalese
Lama: Acciaio al carbonio
Conformazione: Lama full tang
Kauri: Scoperto
Aunlo-Bal: singola linea nera incisa
Manicatura: Corno nero di bufalo
Finiture: -
Lunghezza lama: 250 mm.
Spessore della lama: 6 mm.
Lunghezza totale: 375 mm.
Peso: 680g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a manoBAHA20 -
Kukri Artisan - Chainpure 13 - Nepalese knife
Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.
Blade: Carbon steel, with incisions
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood engraved
Finishes: Brass
Blade length: 160 mm.
Blade thickness: 8 mm.
Overall length: 280 mm.
Karda: 55 mm.
Chakmak: 55 mm.
Weight: 224g. (308g inclusive sheath)
Sheath: engraved wood and brass
Notes: Original Nepalese knife entirely handmadeCHAIN13 -
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by handCHAIN15 -
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by handKU027 -
Rockstead - SAI Titanium ZDP-189 - knife
Rockstead - SAI Titanium ZDP-189 - knife
Blade: ZDP-189 in 66.8HRC
Handle material: titanium
Blade length: 80 mm.
Blade Thickness: 3.7 mm.
Overall length: 190 mm.
Weight: 140g.
Closure: liner lock
Sheath: Black leather
Notes: Accompanied by a certificate of guarantee with the technical specifications.SAI -
Rockstead - Higo-X-IW - Ironwood ZDP-189 - knife
Rockstead - Higo-X-IW - Ironwood ZDP-189 - knife
With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.
Blade: ZDP-189 in 66.8HRC
Handle material: stainless steel and wood SUS420J2 Ironwood
Blade length: 90 mm.
Blade Thickness: 3 mm.
Overall length: 215 mm.
Weight: 133g.
Lock: Frame Lock with swing SKD11 to 61HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.10887 -
Rockstead - Chu DLT - knife
Rockstead - Chu DLT - knife
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.
Blade: Stainless steel with 64HRC Hitachi YXR7 to cover DLT571 3micron
Handle: in green paracord
Blade length: 120mm.
Blade Thickness: 6mm.
Overall length: 2150mm.
Weight: 284g.
Balancing: 1cm back from the lower branch of the guard
Sheath: Leather
Note: Product is out of printChu002 -
Kukri Artigianale - World War II Gurkha wood knife
Kukri - World War II Gurkha
Arma nazionale del Nepal e dei suoi guerrieri Gurkha, si distingue per la sua lama ricurva affilata nel latoconcavo e per lo spostamento del peso verso la punta che consente fendenti molto efficaci. L’impugnatura è diritta, senzaguardia. Caratteristico il ricasso (kauri) e il fodero di legno ricoperto di cuoioin cui sono contenuti anche due piccoli coltelli (karda e chakmak).
Lama: Acciaio al carbonio
Manicatura: Legno - ATTENZIONE, trattandosi di un prodotto artigianale la colorazione del manico può variare rispetto al modello fotografato
Lunghezza lama: 250 mm.
Spessore della lama: 11 mm.
Lunghezza totale: 405 mm.
Peso: -- g.
Fodero: in cuoio con trattamento camouflage e legno, realizzato a mano
Note: ogni coltello e' interamente realizzato a mano in Nepal e comprende anche due piccoli coltelli.3598C -
Citadel - Stavanger Green Grey Ray Skin - custom knife
WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.
Intended Use: collection / sports
Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle: stingray leather
Blade length: about 50mm.
Blade thickness: approx 4mm.
Closed Length: about 82mm.
Total length: about 145m.
Thick when closed: about 15mm.
Balance: -
Weight: about 78g.
Lock: Liner lock
Clip: -
Sheath: sheath
package:
Notes: -10632 -
Citadel - Baltaka Knife - custom knife
These handmade knives are distinguished by their original line, but functional, well that is coupled alletradizionali manufacturing techniques and materials used.
The blades are in fact hardened coal until Adavere a hardness of about 40 HRC after which, after having been hand-hammered, back and sides are covered with clay and the wire refreshed to 60 HRC to have excellent cutting capacity, flexibility and penetration. The knife is then polished and sharpened by hand on stone and finished in every detail.Blade: Stainless DNH7
manicatura: wood
Blade length: 130 mm.
Handle Length: 70 mm.
Blade Thickness: 4.5 mm.
Total length: 270 mm.
Sheath: Leather brown handmade
Weight: 106 g.Note: Being craft knives, and finishes for slightly differing from each other, the knife itself may not be identical to that represented in the images.
10636 -
Citadel - True Knife - custom knife
These handmade knives are distinguished by their original line, but functional, well that is coupled alletradizionali manufacturing techniques and materials used.
The blades are in fact hardened coal until Adavere a hardness of about 40 HRC after which, after having been hand-hammered, back and sides are covered with clay and the wire refreshed to 60 HRC to have excellent cutting capacity, flexibility and penetration. Each knife is then polished and sharp hand-polished and finished in every detail.Blade: Stainless DNH7
manicatura: Micarta
Blade length: 60 mm.
Handle Length: 70 mm.
Blade thickness: 4 mm.
Total length: 164 mm.
Sheath: Leather brown handmade with horizontal mounting of the knife
Weight: 122 g.Note: Being craft knives, and finishes for slightly differing from each other, the knife itself may not be identical to that represented in the images.
10635 -
Citadel - Ola in plane tree wood - custom knife
WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.
Intended Use: collection / sports
Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle: wood plane
Blade length: about 80mm.
Blade thickness: approx 4mm.
Closed Length: about 120mm.
Total length: about 210mm.
Thick when closed: about 20mm.
Balance: -
Weight: about 166g.
Lock: Liner lock
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -10634 -
Citadel - Friction Folder wood - custom knife
WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.
Intended Use: collection / sports
Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle material: wood
Blade length: about 65mm.
Blade thickness: about 2mm.
Closed Length: about 154mm.
Total length: about 185mm.
Thick when closed: about 13mm.
Balance: -
Weight: about 68g.
Closing: -
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -10633 -
Citadel - Friction Folder - custom knife
WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.
Intended Use: collection / sports
Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle material: wood
Blade length: about 65mm.
Blade thickness: about 2mm.
Closed Length: about 154mm.
Total length: about 185mm.
Thick when closed: about 13mm.
Balance: -
Weight: about 68g.
Closing: -
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -10362 -
Citadel - Nordic Inciso - 287 - coltello artigianale
Citadel - Nordic Big
Questi coltelli artigianali si distinguono per la loro linea originale, ma funzionale, che ben si accoppia alletradizionali tecniche realizzative ed ai materiali impiegati.
Le lame vengono infatti temprate a carbone fino adavere una durezza di circa 40 HRC dopodich, dopo essere state martellate a mano, dorso e lati vengono rivestiti di argilla ed il filo ritemprato a 60 HRC per avere ottime capacit di taglio, penetrazione e flessibilit. Il coltello viene poi lucidato ed affilato a mano su pietra e rifinito in ogni singolo dettaglio.
Lama: Acciaio DNH7 "Bruit de forge" a tempra selettiva 40/60 HRC con dorso lavorato a lima
manicatura: In Bosso con inserti in Corno di bufalo, legno di Padouk e di Ebano
Lunghezza lama: 95 mm.
Lunghezza impugnatura: 125 mm.
Spessore della lama: 4 mm.
Lunghezza totale: 215 mm.
Fodero: Cuoio marrone lavorato a mano
Peso: 105 g.
Nota: Essendo coltelli artigianali, e differendo leggermente per finiture l'uno dall'altro, il coltello da voi ordinato potrebbe non essere identico a quello rappresentato nelle immagini.3921 -
Citadel - Aizto Bufalo - 305M - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono approssimativi e variano da coltello a coltello trattandosi di prodotti artigianali.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: Corno di Bufalo D'acqua
Lunghezza lama: circa 90mm.
Spessore lama: circa 4mm.
Lunghezza chiuso: circa 110mm.
Lunghezza totale: circa 200mm.
Spessore da chiuso: circa 18mm.
Bilanciatura: -
Peso: circa 80g.
Chiusura: -
Clip: -
Fodero: -
Confezione: -
Note: -3955 -
Citadel - Buddy Big - 217 - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono indicativi e, trattandosi di prodotti artigianali, variano da coltello a coltello.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: legno
Lunghezza lama: circa 80mm.
Spessore lama: circa 4mm.
Lunghezza chiuso: circa 198mm.
Lunghezza totale: circa 178mm.
Spessore da chiuso: circa 18mm.
Bilanciatura: -
Peso: circa 178g.
Chiusura: -
Clip: -
Fodero: busta in pelle
Confezione: -
Note: -3904G -
Citadel - Buddy Small - 216 - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono indicativi e, trattandosi di prodotti artigianali, variano da coltello a coltello.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: legno
Lunghezza lama: circa 73mm.
Spessore lama: circa 4mm.
Lunghezza chiuso: circa 100m.
Lunghezza totale: circa 170mm.
Spessore da chiuso: circa 16mm.
Bilanciatura: -
Peso: circa 46g.
Chiusura: -
Clip: -
Fodero: busta in pelle
Confezione: -
Note: -3904 -
Citadel - Camp Bufalo - 565 - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono approssimativi e variano da coltello a coltello trattandosi di prodotti artigianali.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: corno di bufalo
Lunghezza lama: circa 135mm.
Spessore lama: circa 5,5mm.
Lunghezza totale: circa 247mm.
Bilanciatura: -
Peso: circa 178g.
Chiusura: arretrata di 1,5 cm
Fodero: cuoio
Note: -3976 -
Citadel - Camp Knife - 171 - coltello artigianale
Citadel - Camp Knife
Questi coltelli artigianali si distinguono per la loro linea originale, ma funzionale, che ben si accoppia alletradizionali tecniche realizzative ed ai materiali impiegati.
Le lame vengono infatti temprate a carbone fino adavere una durezza di circa 40 HRC dopodichè, dopo essere state martellate a mano, dorso e lati vengono rivestiti di argilla ed il filo è ritemprato a 60 HRC per avere ottime capacità di taglio, penetrazione e flessibilità. Il coltello viene poi lucidato ed affilato a mano su pietra e rifinito in ogni singolo dettaglio.
Lama: Acciaio DNH7 "Bruit de forge" a tempra selettiva 40/60 HRC con dorso lavorato a lima
Manicatura: legno di palissandro
Lunghezza lama: 210 mm.
Spessore della lama: 5 mm.
Lunghezza totale:340 mm.
Peso: 265 g.
Bilanciatura: avanzata, a 25mm dalla guardia
Fodero: marrone, in cuoio, realizzato a mano
Nota: Essendo coltelli artigianali, e differendo leggermente per finiture l'uno dall'altro, il coltello da voi ordinato potrebbe non essere identico a quello rappresentato nelle immagini.3919 -
Citadel - Evo Nordic Big - 285 - coltello artigianale
Destinazione d'uso: caccia
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: palissandro, anelli di cuoio ed osso. guardia in silver nickel
Lunghezza lama: 94mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 214mm.
Spessore da chiuso: -
Bilanciatura: arretrata, a 1cm.
Peso: 175g.
Chiusura: -
Clip: -
Fodero: Cuoio Marrone
Confezione: astuccio di cordura con chiusura zip e ricamo con logo Citadel
Note: l'immagine è a puro scopo esemplicativo in quanto ogni coltello, essendo artigianale, risulta essere unico e diverso dal precedente.3959 -
Citadel - Evo Nordic Small - 283 - coltello artigianale
Destinazione d'uso: caccia
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: palissandro, anelli di cuoio ed osso. guardia in silver nickel
Lunghezza lama: 81mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 181mm.
Spessore da chiuso: -
Bilanciatura: arretrata, a 1cm.
Peso: 110g.
Chiusura: -
Clip: -
Fodero: Cuoio Marrone
Confezione: astuccio di cordura con chiusura zip e ricamo con logo Citadel
Note: l'immagine è a puro scopo esemplicativo in quanto ogni coltello, essendo artigianale, risulta essere unico e diverso dal precedente.3958 -
Citadel - Fidel - 207L - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono approssimativi e variano da coltello a coltello trattandosi di prodotti artigianali.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: legno
Lunghezza lama: circa 80mm.
Spessore lama: circa 3mm.
Lunghezza chiuso: circa 113m.
Lunghezza totale: circa 190mm.
Spessore da chiuso: circa 17mm.
Bilanciatura: -
Peso: circa 46g.
Chiusura: -
Clip: -
Fodero: busta in pelle
Confezione: -
Note: -3902 -
Citadel - Fidel Liner Bufalo - 207M - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono approssimativi e variano da coltello a coltello trattandosi di prodotti artigianali.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7
Trattamento Lama: -
Manicatura: Corno di Bufalo D'acqua
Lunghezza lama: circa 78mm.
Spessore lama: circa 3mm.
Lunghezza chiuso: circa 107mm.
Lunghezza totale: circa 188mm.
Spessore da chiuso: circa 15mm.
Bilanciatura: -
Peso: circa 128g.
Chiusura: liner lock
Clip: -
Fodero: in pelle
Confezione: -
Note: -3956 -
Citadel - Folding Kukri Bufalo - 206 - coltello artigianale
Destinazione d'uso: sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: Corno di Bufalo D'acqua
Lunghezza lama: 115mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 142mm.
Lunghezza totale: 250mm.
Spessore da chiuso: 23mm.
Bilanciatura: -
Peso: 250g.
Chiusura: Liner Lock
Clip: -
Fodero: -
Confezione: -
Note: -3954 -
Citadel - Folding Kukri Legno - 206L - coltello artigianale
Destinazione d'uso: sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: legno
Lunghezza lama: 115mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 142mm.
Lunghezza totale: 250mm.
Spessore da chiuso: 23mm.
Bilanciatura: -
Peso: 250g.
Chiusura: Liner Lock
Clip: -
Fodero: -
Confezione: astuccio di cordura con chiusura zip e ricamo con logo Citadel
Note: -3961 -
Citadel - Giaponino Bufalo - 208 - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono approssimativi e variano da coltello a coltello trattandosi di prodotti artigianali.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7
Trattamento Lama: -
Manicatura: Corno di Bufalo D'acqua
Lunghezza lama: circa 58mm.
Spessore lama: circa 3mm.
Lunghezza chiuso: circa 87mm.
Lunghezza totale: circa 147mm.
Spessore da chiuso: circa 14mm.
Bilanciatura: -
Peso: circa 104g.
Chiusura: liner lock
Clip: -
Fodero: in cordura
Confezione: -
Note: -3957 -
Citadel - Japanese Aikuchi - Special Salamander - Handmade knife
Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (ray skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 122mm. (including habaki)
Total length: 222mm.
Weight: 110g. without sayaNote: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.
CI-ASAL -
Citadel - Japanese Aikuchi No.1 Small - 502S - custom knife
These craftsmanships are distinguished by their classical lineage and their functional quality, which blends well with traditional production techniques and materials used. The blades are hardened to a hardness of about 40 HRC, after which they have been hammered by hand, the back and sides are clad with clay and the thread is retreaded to 60 HRC for excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.
Blade: high-carbon DNH7 steel with selective clay 40 / 60HRC clay and high degree of mirror polishing.
Hamon: Gunome style
Bo-Hi: absent
Total Length: 23.3cm.
Blade length: 11.8cm.
Blade thickness: 3.5mm.
Balance: on guard
Length Grip: 8.5cm.
Weight: 136g.
Saya: black lacquered wood with buffalo horn finishes
Tsuka-ito: Black cotton on the same (white skin) white
Sageo: absent
Fuchi and Kashira: in buffalo horn
Menuki: bronze
Habakia: Copper
Notes: Sold with silk sheath and cordura carrying case.3951 -
Citadel - Nordic 2003 - 282 - coltello artigianale
Citadel - Nordic '03
Questi coltelli artigianali si distinguono per la loro linea originale, ma funzionale, che ben si accoppia alletradizionali tecniche realizzative ed ai materiali impiegati.
Le lame vengono infatti temprate a carbone fino adavere una durezza di circa 40 HRC dopodichè, dopo essere state martellate a mano, dorso e lati vengono rivestiti di argilla ed il filo è ritemprato a 60 HRC per avere ottime capacità di taglio, penetrazione e flessibilità. Il coltello viene poi lucidato ed affilato a mano su pietra e rifinito in ogni singolo dettaglio.
Lama: Acciaio DNH7 "Bruit de forge" a tempra selettiva 40/60 HRC con dorso lavorato a lima
manicatura: In legno Bois de Rose
Lunghezza lama: 95 mm.
Lunghezza impugnatura: 120 mm.
Spessore della lama: 4 mm.
Lunghezza totale: 210 mm.
Fodero: Cuoio marrone lavorato a mano
Peso: 125 g.
Nota: l'immagine è a puro scopo esemplicativo in quanto ogni coltello, essendo artigianale, risulta essere unico e diverso dal precedente.3922 -
Citadel - Skinner Baltic 3 - 563 - coltello artigianale
Destinazione d'uso: caccia
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: Corno di Bufalo D'acqua
Lunghezza lama: 103mm.
Spessore lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 228mm.
Spessore da chiuso: -
Bilanciatura: arretrata, a 2cm.
Peso: 208g.
Chiusura: -
Clip: -
Fodero: Cuoio Marrone
Confezione: astuccio di cordura con chiusura zip e ricamo con logo Citadel
Note: -3952 -
Citadel - Tanto Luxe Inciso - 130 - craft knife
These artisanal products stand out for their classic line and their functional quality, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.Blade: in DHN7 steel with high carbon content with selective clay / 40 / 60HRC tempering and high degree of polishing.
Hamon: Gunome style
Bo-Hi: absent
Total length: 38.5cm.
Blade length: 23.3cm.
Blade thickness: 6.5mm. / 3mm.
Balancing: Advanced 2.5cm from Tsuba
Handle Length: 9.5cm.
Tanto weight: 372g.
Weight with Saya: 488g.
Saya: black lacquered wood, drowned gold leaves and buffalo horn finishes
Tsuka-ito: beige cotton on the same white (breed leather)
Sageo: absent
Tsuba, Fuchi and Kashira: in burnished and finely engraved metal
Menuki, seppa, shitodome: bronze
Habaki: copper
Notes: The Tanto is sold with a silk sheath and carrying case cordura.Small technical glossary: Hamon: hardening line on the blade * Hi: deep groove in the blade, also called bloodsucker * Saya: sword sheath * Tsuka-Ito or Tsuka-gawa: cotton, silk or leather braid wrapping the handle * Tsuba: guard * Drones: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cordage of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which is tied the Sageo * Sori: curvature of the blade
CI-TA-B -
Citadel - Toucan - 150 - coltello artigianale
Citadel - Toucan
Questi coltelli artigianali si distinguono per la loro linea originale, ma funzionale, che ben si accoppia alletradizionali tecniche realizzative ed ai materiali impiegati.
Le lame vengono infatti temprate a carbone fino adavere una durezza di circa 40 HRC dopodichè, dopo essere state martellate a mano, dorso e lati vengono rivestiti di argilla ed il filo è ritemprato a 60 HRC per avere ottime capacità di taglio, penetrazione e flessibilità. Il coltello viene poi lucidato ed affilato a mano su pietra e rifinito in ogni singolo dettaglio.
Lama: Acciaio DNH7 "Brut de forge" a tempra selettiva 40/60 HRC con dorso lavorato a lima
Manicatura: legno di palissandro
Lunghezza lama: 110 mm.
Spessore della lama: 5 mm.
Lunghezza totale: 230 mm.
Peso: 300 g.
Fodero: marrone, in cuoio, realizzato a mano
Nota: Essendo coltelli artigianali, e differendo leggermente per finiture l'uno dall'altro, il coltello da voi ordinato potrebbe non essere identico a quello rappresentato nelle immagini.3918 -
Citadel - Vermicellus - 330 - coltello artigianale
Citadel - Vermicellus
Questi coltelli artigianali si distinguono per la loro linea originale, ma funzionale, che ben si accoppia alletradizionali tecniche realizzative ed ai materiali impiegati.
Le lame vengono infatti temprate a carbone fino adavere una durezza di circa 40 HRC dopodichè, dopo essere state martellate a mano, dorso e lati vengono rivestiti di argilla ed il filo è ritemprato a 60 HRC per avere ottime capacità di taglio, penetrazione e flessibilità. Il coltello viene poi lucidato ed affilato a mano su pietra e rifinito in ogni singolo dettaglio.
Lama: Acciaio DNH7 "Brut de forge" a tempra selettiva 40/60 HRC
Manicatura: legno di rosa
Lunghezza lama: 120 mm.
Spessore della lama: 5 mm.
Lunghezza totale: 220 mm.
Peso: 160 g.
Fodero: marrone, in cuoio, realizzato a mano
Nota: Essendo coltelli artigianali, e differendo leggermente per finiture l'uno dall'altro, il coltello da voi ordinato potrebbe non essere identico a quello rappresentato nelle immagini.3917 -
Crafty Kukri - Jungle knife 001 - knife
Kukri - Gurkha Army
Nepal's national weapon and its Gurkha warriors are distinguished by their sharp curved blade in the lathe and the weight shift towards the tip that allows very effective gaiters. The grip is straight, no guard. Characteristic is the ricotta (kauri) and the leather sheath covered with two small knives (karda and chakmak).
Blade: Carbon steel
Manicure: black polished horn
Blade length: 265 mm.
Blade thickness: 10 mm.
Total length: 390 mm.
Weight: g.
Sheath: leather and wood, handmade
Notes: Every knife is handmade in Nepal and also includes two small knives.3600 -
Kukri Artigianale - Balance in corno 006 - coltello
NOTA: Trattandosi di prodotti artigianali, i prodotti a nostra disposizione potrebbero lievemente differire dal punto di vista estetico rispetto a quello presente in foto
Lama: Acciaio al carbonio
Conformazione: Dui Chirra
Kauri: Scoperto
Aunlo-Bal: motivi incisi in nero e oro con un disegno di un sole
Manicatura: Corno nero di bufalo lucidato ed inciso
Finiture: Ottone
Lunghezza lama: 205 mm.
Spessore della lama: 8.5 mm.
Lunghezza totale: 320 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Peso: 350g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano3609