Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

These high quality knives, are handcrafted in the tradition of French Thiers cutlery.

This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.

The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.

The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly. 

The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs. 

The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.

Intended Use: Regional/Collection/Outdoor/Hunting

Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -

Intended Use:  Collection

Type of production: Midtech
Country of Production: Italy
Blade: Stainless steel M390 58/60HRC
Blade Treatment: PVD Blacwashed
Handle: Titanium with PVD Blacwashed treatment and bronze-colored anodized titanium spacers
Blade length: 78mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 180mm.
Weight: 110g.
Closure: FrameLock
Clip: Bronze-colored anodized titanium, machined from solid
Packaging: Denim pouch, warranty certificate, Velcro patch, small 6-sided playing dice
Notes: Designed and made by Denis Simonutti - Specimen number 4 of a micro-production batch of only 10 pieces

A handmade Laguiole en Aubrac knife made by a master craftsman from the region of origin of Laguiole. Extremely precise in its manufacture, it is decorated with the shepherd's cross on the handle. This cross allowed those who left during the long months of the transhumance to say their prayers once the knife was stuck in the bread.

Destination: French regional collector's knife

Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 68 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: Absent

Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.

Intended use: Tactical / Allround

Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Camo
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | Smashing

Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.

Intended use: Tactical / Allround

Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Camo
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | Smashing

Type of production: Artisan
Lama production: Italy
Blade: integral, D2 (59-61 HRC) with cryogenic treatment
Blade treatment: satin
Handle: G10 with 3D texture
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 280mm.
Balancing: set back
Weight: 425g.
Sheath: Kydex with belt attachment and MOLLE clip attachment
Package: -
Notes: limited series of 40 pieces.

Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.

The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".

The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.

The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.

Intended use: Collection / Sports

Type of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Mirror polished
Handle: Tip of bovine horn
Blade length: 112mm.
Blade thickness: 3mm.
Length closed: 143mm.
Total length: 255mm.
Weight: 80g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruining

The "Fidelis" was born from the desire to pay homage to the "medieval Larzac", with its old Templar villages and legends.
It is a knife that symbolizes the roughness of this land, the rusticity of its vegetation and its climate, but also the nobility of women and men who have worked, modeled, guarded and inserted into this object a soul.
Made in Millau, in the heart of Aveyron, in the cutlery workshops "L'ame du Causse", it is worked with noble materials, such as the precious wood of ebony that the Knights Templars have brought back to their return. Its "sage leaf" blade, made of 12C27 steel, renowned for its cutting quality and ease of maintenance, will be a guarantee of longevity. The "Fidelis" will be your ideal companion to share moments of everyday life full of history.

Intended use: Regional

Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade treatment: Satin
Handle: Ebony wood
Blade length: 85mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 54g.
Opening: manual, two-handed
Closure: upper safety ring
Packaging: cardboard case
Note: -

Intended Use: Regional / Collection

Type of production: Hand
Blade: sanmai steel with sharp VG10 burnished and damask cheeks to 32 layers
Production Country: France
Handle: Carbon fiber with aluminum liners
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Weight: 70g.
Closure: retaining spring
Clip: absent
Sheath: absent
Notes: -

Craft knife produced by the famous Master cutler Italian Salice Max Sanna.

This model called Wave, uses the Japanese steel sintered SPG2 damask laminated to 69 layers.

Intended Use: Collection / Gentleman

Type of production: Artisan
Production Lama: Italy
Blade: Stainless sintered SPG2 in DAMACO rolled 61/62 HRC
Blade treatment: -
Handle: Canvas Micarta
Blade length: 73mm.
Blade thickness: 3mm.
Closed Length: 90mm.
Overall length: 170mm.
Thick when closed: 15mm.
Balancing: -
Weight: 92g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Notes: ONE PIECE - knife custom crafted by Max

For more information you can view the site sull'accaio used: www.collinisteel.com

Laguiole En Aubrac - Horn of Buffalo - knife collection

Destination : Knife regional French collector

Blade: 12C27 Swedish stainless steel in 54HRC brut de forge.
Handle: Buffalo
Blade length: 90 mm.
Blade Thickness: 2.5 mm .
Overall length : 220 mm .
Weight: 68 g .
Folders : Stainless steel brushed
Heads : Absent
Closure : Spring retention in satin stainless steel
Clip: None
Sheath: None

Laguiole En Aubrac - Buffalo horn with sanmai Japanese blade - knife collection

Intended Use: Regional / Collection

Type of production: craft
Blade: damascus steel and laminated VG10 Japanese
Production Lama: France
Handle: Buffalo Horn
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 90g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -

Destinazione d'uso: Survival/Sportivo

Lama: in acciaio inox AN-58
Manicatura: plastica e metallo
Lunghezza lama: 105mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 210mm.
Bilanciatura: arretrata, a 1.5cm dal ramo di guardia inferiore
Peso: 78g.
Chiusura: -
Clip: -
Fodero: in pelle
Note: -

Laguiole en Aubrac - Bone with double blosters carbon - knife collection

Intended Use: Regional / Collection

Type of production: craft
Blade: Stainless steel 12C27
Production Blade: France
Handle: double blosters bone with carbon black and white
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 74g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -

En Aubrac Laguiole - Laguiole d'autrefois in horn tip - knife collection

Intended use: Collection / Sports

Type of production: craft
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle Blonde
Blade length: 112mm.
Blade Thickness: 3mm.
Closed Length: 143mm.
Overall length: 255mm.
Balancing: -
Weight: 80g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole en Aubrac

Laguiole en Aubrac - Double Head - Ebony Wood - knife collection

Intended Use: Regional / Collection

Type of production: craft
Blade: Stainless steel 12C27
Production Blade: France
Handle: ebony
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 110g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -

Laguiole En Aubrac - Horn Classic 11 cm - Knife

Intended use: Collection / Sports

Type of production: handmade
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle
Blade length: 105mm.
Blade Thickness: 3mm.
Closed Length: 130mm.
Total length: 240mm.
Balance: -
Weight: 106g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole En Aubrac

Laguiole En Aubrac - Horn Classic - knife

Intended use: Collection / Sports

Type of production: handmade
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle
Blade length: 90mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Total length: 200mm.
Balance: -
Weight: 72g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole En Aubrac

Laguiole En Aubrac - Buffalo Brut de forge and knife - knife

Destination: Knife regional French collector

Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: Buffalo
Blade length: 90 mm.
Blade Thickness: 2.5 mm.
Total length: 220 mm.
Weight: 68 g.
Folders: Stainless steel satin
Heads: Absent
Closure: Spring retention in satin stainless steel
Clip: None
Sheath: None

Laguiole en Aubrac - buffalo horn insignia with hammer and blade sanmai - knife collection

Type of production: crafts
Blade: rolled steel damask and Japanese VG10
Production Lama France
Handle: buffalo horn with insignia hammered
Blade length: 100mm.
Blade Thickness: 3mm.
Length closed: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 106g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -

Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.

The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".

The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.

The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.

Intended use: Collection / Sports

Type of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Polished
Handle: fossil ivory and carbon fiber
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Weight: 68g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruining

ATTENTION: as this is a handmade product, the external appearance (colors, finishes, etc.) differs from the photographed piece.

Intended use: Regional / Collection

Type of production: artisanal
Blade: 12C27 stainless steel
Lama production: France
Handle: Cattle Horn
Blade length: 100mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Total length: 220mm.
Balancing: -
Weight: 92g.
Closure: rear retention springk
Clip: -
Sheath: -
Notes: rear corkscrew

Vintage pattada set consisting of five pieces of different sizes with carbon steel blade and plastic handle.

1st - total length 34 cm - blade length 15,50 cm
2nd - total length 30 cm - blade length 14 cm
3rd - total length 27.50 cm - blade length 12 cm
4th - total length 26 cm - blade length 11.50 cm
5th - total length 23.5 cm - blade length 10.50 cm

Destinazione d'uso: Collezione/Sportivo

Tipo di produzione: Artigianale
Paese di produzione: Indonesia
Lama: in acciaio laminato ZDP-189 e ATS-34
Finitura lama: Satinatura
Manicatura: Titanio 6AL4V e fibra di carbonio
Lunghezza lama: 65mm.
Spessore lama: 3mm.
Lunghezza chiuso: 85mm.
Lunghezza totale: 97mm.
Spessore da chiuso: 11mm.
Peso: 62g.
Chiusura: Frame Lock
Clip: Titanio 6AL4V
Fodero: -
Confezione: -
Note: Realizzati interamente a mano da Yuna Knives