Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
MKM - Hero Knife by T. Rumici - Titanium and Carbon Fiber - PRIVATE COLLECTION - MK HR-CFT - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased.
* Condition: overall in good condition
* Commercially available
* Sharpening: factory sharpened
* Marks on blade: none
* Marks on handle: small marks on titanium head.
* Box: cardboard box with MKM Maniago Knife Makers logos.
* Scabbard: synthetic pouch with zipper closure and belt loop.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratoryIntended Use: Sporting
Type of production: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: marbled carbon fiber grips, titanium liners and heads
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 170g.
Length when closed: 130mm.
Total length: 215mm.
Closure: Back Lock
Clip: titanium, removable, deep pocket type
Sheath: synthetic material pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-AP-HR-CFT -
Lurisinga - Gallurese Razor Blade - Traditional Gallura Knife - Handcrafted Knife
The "Lurisinca," a traditional knife from Luras in Gallura, owes its name to the Lurese term for a local woman, reflecting the feminine nature of the "razor blade" used. The Gallurese Razor Blade, a typical Sardinian knife resembling a point-less shaving razor, was essential in cork processing, especially for making "quadretti," precursors to cork stoppers. However, this practice has declined due to the economic crisis, forcing many craftsmen to close their shops. The Gallurese Razor Blade, versatile and always at hand, represented an indispensable tool for every daily need.
Type of Production: Handcrafted
Blade Production: Italy
Blade: Stainless steel
Handle: Bovine horn tip
Blade Length: 80mm.
Blade Thickness: 2mm.
Closed Length: 90mm.
Total Length: 185mm.
Weight: 65g.
Lock: No blade lock
Packaging: Cardboard boxLU-GAL€77.87Only 2 left -
MKM - Campo 7 - MagnaCut & Natural Micarta - CP07MAG-NC - Multipurpose Knife
A story of evolution:
One day a handful of guys were thinking about how to improve their multipurpose knife, a classic knife made and thought of over a century ago, but without having to integrate or think of additional functions since all possible tools had already been invented or proposed.
So one of these guys said, "Why don't we simply improve the steel of the blade to provide better cutting and holding capabilities and not toughen the structure while still leaving it compact and familiar?" There Campo was born, with fabulous MagnaCut steel on the main blade!
Features:
* Blade
* Bottle opener
* Flat screwdriver
* Box opener
* Fork
* Scissors
* Phillips screwdriver
* Corkscrew
Intended Use: Hiking / Multipurpose
Production Type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut 61/63 HRC steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 67mm.
Blade thickness: 2.5mm.
Total length: 100mm.
Weight: 107g.
Closure: SlipJoint
Clip: -
Sheath: -
Packaging: Cardboard box with MKM logos
Notes: -MK-CP07MAG-NC -
MKM - Malga 6 - MagnaCut & Black Micarta - MP06MAG-BC - Multipurpose Knife
A story of evolution:
One day a handful of guys were thinking about how to improve their multipurpose knife, a classic knife made and thought of over a century ago, but without having to integrate or think of additional functions since all possible tools had already been invented or proposed.
So one of these guys said, "Why don't we simply improve the steel of the blade to provide better cutting and holding capabilities and not toughen the structure while still leaving it compact and familiar?" There Malga was born, with fabulous MagnaCut steel on the main blade!
Features:
* Blade
* Bottle opener
* Flat screwdriver
* Box opener
* Fork
* Reamer
* Corkscrew
Intended Use: Hiking / Multipurpose
Production type: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut 61/63 HRC steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 67mm.
Blade thickness: 2.5mm.
Total length: 100mm.
Weight: 79g.
Locking system: SlipJoint
Clip: -
Sheath: -
Packaging: Cardboard box with MKM logos
Notes: -MK-MP06MAG-BC -
MKM - Isonzo Clip Point by Vox - M390 & Marble Carbon Fiber - FX03M-3CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-3CM -
MKM - Isonzo Hawkbill by Vox - M390 & Marble Carbon Fiber - FX03M-1CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with an hawkbill tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with flipper or thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-1CM -
MKM - Isonzo Cleaver by Vox - M390 & Marble Carbon Fiber - FX03M-2CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-2CM -
MKM - Vincent by Vox - Top Shield N690Co & Black G10 - VCN-GBB - knife
The blade shapes of this new folding knife designed by Jesper Voxnaes are reminiscent of ancient times when pirates sailed the seas with their precious swords at their side, maestone and ready to accomplish any task! The blade is BOHLER N690Co with black Black Top Shield cover and G10 handle for the best possible grip.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: Black Top Shield
Handle: G10, with embedded stainless steel liners and anodized aluminum spacer
Blade length: 62mm.
Blade thickness: 3.2mm.
Length closed: 106mm.
Total length: 175mm.
Thickness when closed: 13mm.
Weight: 100g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VOX VoxnaesMK-VCN-GBB -
MKM - Flame Light by Zieba - M390 & Green Micarta - FL02L-GC - knife
FLAME LIGHT, practical folding knife and now even lighter!
BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02L-GC -
MKM - Eclipse by Vox - Satin MagnaCut & Dark Stonewash Titanium - EL-GYBK - Knife
Eclipses indicate significant periods of change and transformation.
While a solar eclipse opens the portal to new beginnings and changes,
a lunar eclipse reveals energies that help us complete a journey or change course in some way...
Either way, follow the light beyond the darkness!
Intended Use: Sporty
Production type: Industrial
Country of manufacture: Italy
Blade: MagnaCut steel HRC 61/63
Blade treatment: Satin finish
Handle: Titanium Gr.5 Ti6AI4V Dask Stonewash
Blade length: 81mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 191mm.
Weight: 90g.
Closure: FrameLock
Clip: titanium, deep pocket, removable
Sheath: zippered nylon pouch
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VoxnaesMK-EL-GYBK -
MKM - Eclipse by Vox - Dark Stonewash MagnaCut & Purple Titanium - EL-PRBKD - Knife
Eclipses indicate significant periods of change and transformation.
While a solar eclipse opens the portal to new beginnings and changes,
a lunar eclipse reveals energies that help us complete a journey or change course in some way...
Either way, follow the light beyond the darkness!
Intended Use: Sporty
Production type: Industrial
Country of manufacture: Italy
Blade: MagnaCut steel HRC 61/63
Blade treatment: Dark Stonewashed
Handle: Titanium Gr.5 Ti6AI4V Dark Stonewashed with anodizing
Blade length: 81mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 191mm.
Weight: 90g.
Closure: FrameLock
Clip: anodized titanium, deep pocket, removable
Sheath: zippered nylon pouch
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VoxnaesMK-EL-PRBKD -
MKM - Miura - M390 Button Lock - Titanium Blue - MI-TBL - knife
THE MAGIC BUTTON FOR HAPPINESS
Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!
Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball-bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC
Blade finish: Satin finish
Handle: Titanium Gr. 5 Ti6AI4V with 3D machining, CNC machined from billet
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from billet
Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year
We advise our customers that discountische Loyalty are not active for this productMK-MI-TBL -
MKM - Hero by Tommaso Rumici - M390, Titanium and G10 Black - MK-HR-GTBK - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: G10 grips , titanium liners and bolsters
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 175g.
Length when closed: 130mm.
Total length: 215mm.
Closure: BackLock
Clip: titanium, removable, deep pocket type
Scabbard: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-HR-GTBK -
MKM - Hero by Tommaso Rumici - M390, Titanium and Micarta Natural - MK-HR-NCT - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta grips , titanium liners and bolsters
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 175g.
Length when closed: 130mm.
Total length: 215mm.
Closure: BackLock
Clip: titanium, removable, deep pocket type
Scabbard: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-HR-NCT -
MKM & Mercury - Makro 1 knife Drop by Vox - Naked - MK MA01-N - sports knife
Intended use: Sporty
Type of production: Industrial by Mercury
Country of Production: Maniago - Italy
Blade: Full tang in M390 59/61 HRC stainless steel
Blade treatment: Stone washed
Handle: Naked
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 48g.
Sheath: Black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA01-N -
MKM & Mercury - Makro 2 Knife Sheepsfoot By Vox - Black G10 - MK-MA02-GBK - Sporting Knife
Intended use: Neck Knife / Sporty
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Full tang in M390 59/61 HRC stainless steel
Blade treatment: Stone washed
Handle: G10
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 77g.
Scabbard: Black leather sheath, for neck, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA02-GBK -
MKM - Flame Light by Zieba - M390 & Black Micarta - FL02L-BC - knife
FLAME LIGHT, practical folding knife and now even lighter!
BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02L-BC -
MKM & Mercury - Makro 1 knife Drop by Vox - Natural Micarta - MK MA01-NC - sports knife
Intended use: Sports
Type of production: Industrial by Mercury
Country of production: Maniago - Italy
Blade: full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: Natural Micarta
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 67g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA01-NC -
MKM & Mercury - Makro 1 knife Drop by Vox - Black G10 - MK MA01-GBK - sports knife
Intended use: Sports
Type of production: Industrial by Mercury
Country of production: Maniago - Italy
Blade: full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: G10
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 72g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA01-GBK -
Le Petit Jouteur - Oyster Opener Knife Set and Leather Hand Guard
Handcrafted box containing a "Le petit jouteur" oyster knife and a leather hand guard.
Leaning the handle of your "Le Petit Jouteur" oyster knife against your ear, you may not hear the lapping of the waves ...
Oyster knife with mussel shell handle
Handcrafted made in France."Le Petit Jouteur" professional oyster knife has a 2.5 mm thick stainless steel blade.
High quality, very hard and ultra-strong thanks to a heat treatment process by cryogenization.
An ambidextrous, ergonomically shaped knife with a stainless steel blade that allows you to open shellfish quickly and safely.
A minimum of care and maintenance , will allow you to keep it in a state that will delight you for many years.
Included in the package is an ambidextrous hand guard made of handcrafted leather.
Weight 120 g
Dimensions 12 × 3.5 × 1.5 cm.
8169CON€65.57Only 1 left -
MKM - Maximo Flipper Knife Design by Bob Terzuola - Black Micarta - MK-MM-BCT - knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Locking mechanism: Framelock
Clip: titanium, removable, deep pocket type.
Sheath: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos
Notes: Tungsten carbide rear glass breaker - Design by Bob TerzuolaMK-MM-BCT -
MKM - Maximo Flipper Design by Bob Terzuola - Green Micarta - MK-MM-GCT - folding knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Closure: Framelock
Clip: titanium, removable, deep pocket type.
Scabbard: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos
Notes: Tungsten carbide rear glass breaker - Design by Bob TerzuolaMK-MM-GCT -
MKM - Maximo Flipper Knife Design by Bob Terzuola - Titanium - MK-MM-T - folding knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: Titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 134g.
Length when closed: 115mm.
Total length: 197mm.
Locking mechanism: Framelock
Clip: titanium, removable, deep pocket type.
Scabbard: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos
Notes: Tungsten carbide rear glass breaker - Design by Bob TerzuolaMK-MM-T -
MKM - Goccia Flipper by Jens Anso - Dark Stonewashed Titanium - MK-GC-TDSW - knife
GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.
With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, Water, which in 1453 moved the hammers to forge the first blades and which has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade Treatment: Dark Stonewashed
Handle: Dark Stonewashed Titanium with anodized titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 15mm
Weight: 135g.
Closure: LinerLock
Clip: anodized titanium, deep pocket, removable
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens AnsoMK-GC-TDSW -
MKM - Goccia Flipper by Jens Anso - Bronze Titanium - MK-GC-TBR - knife
GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.
With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, the water, which in 1453 moved the hammers to forge the first blades and which has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade treatment: satin finish
Handle: Bronze anodized titanium with stonewashed titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 15mm
Weight: 135g.
Closure: LinerLock
Clip: stonewashed titanium, deep pocket, removable
Scabbard: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens AnsoMK-GC-TBR -
MKM - Goccia Flipper by Jens Anso - Black G10 - MK-GC-GBK - knife
GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.
With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, the water, which in 1453 moved the hammers to forge the first blades and that has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade treatment: satin finish
Handle: G10, with stainless steel embedded liners and anodized titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total lenght: 200mm.
Thickness when closed: 15mm
Weight: 110g.
Closure: LinerLock
Clip: anodized titanium, deep pocket, removable
Sheath: Nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens AnsoMK-GC-GBK -
MKM - Goccia Flipper by Jens Anso - Green Canvas Micarta - MK-GC-GC - knife
GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.
With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, Water, which in 1453 moved the hammers to forge the first blades and which has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade treatment: Satin finish
Handle: Micarta, with stainless steel embedded liners and titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 15mm
Weight: 110g.
Closure: LinerLock
Clip: Titanium, deep pocket, removable
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens AnsoMK-GC-GC -
MKM - Pocket sheath with magnetic closure - Orange leather - knife accessories
Magnetic closure pocket sheath realized by the Genuine Italian Vegetable Tanned Leather Consortium: a handicraft product of a centenary Tuscan tradition, accompanied by a numbered certificate of guarantee.
Thanks to the magnets placed on the back of the sheath and on the closing flap, it allows you to carry your knives without clips comfortably in your pocket, or you can use it with a belt holder with all the convenience of being able to attach it without removing the belt.
Kind of production: Handmade
Country of Production: Italy
Material: Genuine vegetable tanned leather
External measures: 120mm. x 50mm.
Internal measures: 90mm. x 35mm.
Type of closure: magnetic, bi-directional
Weight: 60g.MK-PLSM01-OR -
MKM - Pocket sheath with magnetic closure - Burgundy leather - knife accessories
Magnetic closure pocket sheath realized by the Genuine Italian Vegetable Tanned Leather Consortium: a handicraft product of a centenary Tuscan tradition, accompanied by a numbered certificate of guarantee.
Thanks to the magnets placed on the back of the sheath and on the closing flap, it allows you to carry your knives without clips comfortably in your pocket, or you can use it with a belt holder with all the convenience of being able to attach it without removing the belt.
Kind of production: Handmade
Country of Production: Italy
Material: Genuine vegetable tanned leather
External measures: 120mm. x 50mm.
Internal measures: 90mm. x 35mm.
Type of closure: magnetic, bi-directional
Weight: 60g.MK-PLSM01-BU -
MKM - Edge - SlipJoint by Graciut - Titanium Bronze - MKEG-TBR - knife
Intended Use: Sporty / Gentleman / EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade Treatment: Satin
Handle: Titanium
Blade length: 76mm.
Blade thickness: 2.5mm.
Length closed: 102mm.
Total lenght: 174mm.
Thickness when closed: 12mm.
Weight: 72g.
Opening: two hands
Washers: Brass
Closure: Slip Joint
Clip: -
Scabbard: leather, with belt loop with magnetic release
Package: Cardboard box with logos MKM Maniago Knife Makers
Notes: Design by Bruno Bruna Graciut, Master CIC (Italian Knife Makers Guild)MK-EG-TBR -
MKM - Edge - SlipJoint by Graciut - Aluminium Green - MKEG-AGR - knife
Intended Use: Sporty / Gentleman / EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Aluminium
Blade length: 76mm.
Blade thickness: 2.5mm.
Length closed: 102mm.
Total lenght: 174mm.
Thickness when closed: 12mm.
Weight: 53g.
Opening: two hands
Washers: Brass
Closure: Slip Joint
Clip: -
Scabbard: leather, with belt loop with magnetic release
Package: Cardboard box with logos MKM Maniago Knife Makers
Notes: Design by Bruno Bruna Graciut, Master CIC (Italian Knife Makers Guild)MK-EG-AGR -
MKM - Edge - SlipJoint by Graciut - Aluminium Black - MKEG-ABK - knife
Intended Use: Sporty / Gentleman / EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Aluminium
Blade length: 76mm.
Blade thickness: 2.5mm.
Length closed: 102mm.
Total lenght: 174mm.
Thickness when closed: 12mm.
Weight: 53g.
Opening: two hands
Washers: Brass
Closure: Slip Joint
Clip: -
Scabbard: leather, with belt loop with magnetic release
Package: Cardboard box with logos MKM Maniago Knife Makers
Notes: Design by Bruno Bruna Graciut, Master CIC (Italian Knife Makers Guild)MK-EG-ABK -
Indiana - Miniature knife - Bowie Sitting Bull Black - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-TSB€23.77Only 1 left -
Indiana - Miniature knife - Bowie Bison - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-BI€23.77Only 2 left -
Indiana - Miniature knife - Bowie Survival - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-S€23.77Only 2 left -
Indiana - Miniature knife - Sitting Bull Bowie - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-TS€23.77Only 4 left -
No brand - Pocket tactical knife vintage - knives
tactical knife made in Taiwan around the early 90's - One-handed ambidextrous opening and back lock blade. Complete with cordura sheath
Type of production: Industrial
Production Lama: Taiwan
Blade: 440 steel
Blade treatment: satin blade
Handle: kraton
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 195mm.
Weight: 142g.
Sheath: in cordura
Note: -NB-1260€57.38Only 2 left -
No brand - Scout knife vintage - knives
Type of production: Industrial
Production Lama: Italy
Blade: 440A steel
Blade treatment: polished blade
Handle: plastic material
Blade length: 120mm.
Blade thickness: 2.5mm.
Total length: 240mm.
Weight: 84g.
Sheath: in leather
Note: -NB-SCOUT€15.57Only 4 left -
MKM - Flame by Zieba - M390 PVD & Red Lava Fat Carbon - FL02-FCLTD - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Bohler M390 stainless steel
Blade finish: Black PVD
Handle: Titanium PVD and Fat Carbon Red Lava
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 61g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Frame Lock
Clip: PVD stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02-FCLTD -
MKM & Fox - Isonzo Clip Green by Vox - MK-FX03-3PGO - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: N690Co 59 / 60HRC stainless steel
Blade treatment: Black Idroglider
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-3PGO -
MKM & Fox - Isonzo Clip Gray by Vox - MK-FX03-3PGY - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690Co 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-3PGY -
MKM & Fox - Isonzo Cleaver Green by Vox - MK-FX03-2PGO - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Black Idroglider
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-2PGO -
MKM & Fox - Isonzo Cleaver Gray by Vox - MK-FX03-2PGY - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-2PGY -
MKM & Fox - Isonzo Hawkbill Gray by Vox - MK-FX03-1PGY - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports / TacticalType of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-1PGY -
MKM & Fox - Isonzo Hawkbill Green by Vox - MK-FX03-1PGO - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports / TacticalType of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Black
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-1PGO -
MKM & Viper - Timavo Flipper by Vox - Green Micarta - VP02-GC - knife
A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Stonewashed
Handle: Stainless steel and Green Canvas Micarta
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 110g.
Closing: Liner Lock
Clip: stainless steel, flush
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-VP02-GC -
MKM - Isonzo Cleaver knife black by Vox - MK-FX03-2PBK - knife
Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Stonewash
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-2PBK -
MKM - Isonzo Hawkbill knife black by Vox - MK-FX03-1PBK - knife
Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Black
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-1PBK -
MKM - Isonzo black clip point knife by Vox - MK-FX03-3PBK - knife
Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Stonewash
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-3PBK -
MKM - Isonzo blue clip point knife by Vox - MK-FX03-3PBL - knife
Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Stonewash
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-3PBL -
MKM - Arvenis knife - Carbon and Titanium - MK FX01-MCT - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Handle: front of marbled carbon fiber with titanium insert Gr. 5 Ti6AI4V, rear in titanium Gr. 5 Ti6Al4V, all worked in 3D
Blade length: 84mm.
Total length: 203mm.
Blade thickness: 4mm.
Weight: 112g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Knife manufactured by ViperMK-FX01-MCT -
MKM - Clap by Bob Terzuola - titanium and G10 - MKLS01-GTBK - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: black G10 grips and titanium braces
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-GTBK -
MKM - Raut by Burnley - Green G10 - MKVP01-GBGR - knife
Folding knife made by Viper, with BÖHLER M390 MICROCLEAN steel blade, stonewash finish, Fliipper opening system, rotation mechanism with ball bearings. Hybrid locking system, hidden and elegant like a liner lock and at the same time thick and resistant as a frame lock. Titanium spacer and stainless steel screws.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Stonewashed
Handle: G10 and Titanium
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 117mm.
Total length: 203mm.
Thick when closed: 13.3mm.
Weight: 130g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Sub FrameLock
Clip: titanium, removable
Sheath: nylon pouch with zip and belt loops
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Lucas Burnley - Knife manufactured by ViperMK-VP01-GBGR -
Le Petit Jouter - Oyster Opener Knife - Walnut
Walnut oyster knife
Presitigious Oyster Opener with wooden handle.
Made in France craftsmanship.
The "Le Petit Jouteur" professional oyster knife has a 2.5 mm thick stainless steel blade.
High quality, very hard and ultra-strong, thanks to a heat treatment process by cryogenization.
An ambidextrous oyster spear blade.
Wood handle from French forests .
They use wood of French origin to decorate the handles, which are machined and assembled in France.
A minimum of care and maintenance ,
will enable you to keep your oyster knife in a condition that will amaze you for many years.
8169ostriche€34.42Only 1 left -
Roncola gardening made in Italy - steel blade
Robust hatchet work, perfect for gardening or work in the country.
Production Lama: Italy
Blade: stainless steel curve
Handle: Wood
Blade length: 75mm.
Blade Thickness: 3.5 mm.
Closed Length: 115mm.
Thick when closed: 26mm.
Overall length: 195mm.
Weight: 145g.
Closing: bladeless blockron-1€28.69Only 2 left -
Boss - Folder knife by David Winch - coltello sportivo
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No
* Sharpening: YES
* Marks on blade: No
* Marks on handle: No
* Box: wooden
* Sheath: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryType of production: Industrial
Blade: 440A steel
Blade Treatment: -
Handle: G10 Black
Blade length: 80mm.
Blade thickness: 3mm.
Total length: 195mm.
Weight: 80g.
Note: -BO-DW€61.48Only 2 left -
Condor - Ascia integrale - coltello
Produttore: Condor - Italy
lunghezza totale: 30 cm
lunghezza lama: 9,5 cm
lunghezza manico: 11,5 cm
peso: 697 gr
tipo acciaio: 420 inox
materiale impugnatura: micarta
note: fodero in cuoio7202€49.18Only 2 left -
CRC - 5-56 - Olio Sbloccante Lubrificante Anticorrosivo Idroespellente
Confezione promozionale da 200ml: penetra, sblocca, deterge, lubrifica, espelle l'umidità, arresta ed impedisce la corrosione, elimina le dispersioni elettriche.
Penetra profondamente riducendo la tensione superficiale all'interfaccia metallo/ossido; sblocca dadi, raccordi e cerniere.
Espelle l'umidità dalle fesure più minute. Non contiene siliconi. Non altera la conducibilità dei contatti. Consente l'avviamento di motori bagnati. Impedisce la formazione del ghiaccio.
Energico solvente di grassi, catrame e residui della combustione. Deterge carburatori, catene di moto, mozzi ruota, pistoni di ammortizzatori ecc.
Elimina i cigolii e lubrifica le parti più profonde di serrature, cardini, lucchetti, comandi a cavetto ecc..6443€12.30Only 2 left -
CRC - 6-66 Marine - Olio per arrestare e impedire la corrosione - accessori coltelli
Confezione da 200m. - Olio concepito per utilizzi marini in presenza di acqua salmastra: penetra, sblocca, espelle l'umidità, arresta ed impedisce la corrosione, elimina le dispersioni elettriche, deterge e lubrifica.
Per attrezzature subacquee: penetra profondamente riducendo la tensione superficiale all'interfaccia metallo/ossido arrestanto processi corrosivi in corso unendosi polarmente ai metalli impedendone l'ossidazione, specialmente in ambiente salmastroso.
Espelle l'umidità, Elimina l'effetto cortocircuitante e la dispersioni a massa dovute agli elettroliti. Non contiene siliconi. Non altera la conducibilità dei contatti. Consente l'avviamento di motori bagnati.
Energico detergente. Elimina patine di morchia o grumi untuosi e salati che possono determinare dispersione di corrente o innescare processi corrosivi.
Riduce il coefficiente di attrito e svolge un'efficace azione lubrificante.6434€12.30Only 2 left -
CRC - Gun Store - Olio Protettivo a lunga durata - accessori coltelli
Flacone da 200ml.
Protegge spade, coltelli ed armi da fuoco durante lunghi periodi di inutilizzo.
Forma un film oleoso non essiccante che rende ogni tipo di metallo e acciaio inattaccabile da qualunque agente atmosferico. Neutralizza l'effetto corrosivo delle ceneri e del contatto con le mani. Espelle e respinge l'umidità. Al coperto ed in condizioni ambientali normali impedisce la corrosione per un periodo di circa dua anni.
Su armi da fuoco non occorre rimuoverlo pria dell'uso; in caso di necessità si può comunque asportare con CRC GUN CARE che deterge e assicura una protezione e lubrificazione più compatibile con un utilizzo costante.6432€12.30Only 2 left -
Hubertus Solingen - Outdoor knife - Vintage - sports knife
Type of production: industrial
Blade: 440 stainless steel
Blade treatment: -
Blade production: -
Handle: aluminum
Blade length: 11mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 225mm.
Balancing: -
Weight: 144g.
Closure:
Clip: -
Sheath: in leather
Note: -HS-V-OUT€45.08Only 2 left -
Mondin - 16cm cleaver with Collini blade cover - Kitchen knife
Recommended use: Processing raw meat, bone and cartilage.
Country of manufacture: Italy
Blade: Surgical steel 54-56 HRC
Handle: Non-toxic, non-deformable, impact-resistant Nylon 6/6, perfectly sterilizable up to 180°.
Blade length: 16cm.
Total length: 30cm.
Weight: 519g.
M16€20.49Only 3 left -
MKM - Campo 7 - MagnaCut & Green Micarta - CP07MAG-GC - Multipurpose Knife
A story of evolution:
One day a handful of guys were thinking about how to improve their multipurpose knife, a classic knife made and thought of over a century ago, but without having to integrate or think of additional functions since all possible tools had already been invented or proposed.
So one of these guys said, "Why don't we simply improve the steel of the blade to provide better cutting and holding capabilities and not toughen the structure while still leaving it compact and familiar?" There Campo was born, with fabulous MagnaCut steel on the main blade!
Features:
* Blade
* Bottle opener
* Flat screwdriver
* Box opener
* Fork
* Scissors
* Phillips screwdriver
* Corkscrew
Intended Use: Hiking / Multipurpose
Production Type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut 61/63 HRC steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 67mm.
Blade thickness: 2.5mm.
Total length: 100mm.
Weight: 107g.
Closure: SlipJoint
Clip: -
Sheath: -
Packaging: Cardboard box with MKM logos
Notes: -MK-CP07MAG-GC -
MKM - Campo 7 - MagnaCut & Black Micarta - CP07MAG-BC - Multipurpose Knife
A story of evolution:
One day a handful of guys were thinking about how to improve their multipurpose knife, a classic knife made and thought of over a century ago, but without having to integrate or think of additional functions since all possible tools had already been invented or proposed.
So one of these guys said, "Why don't we simply improve the steel of the blade to provide better cutting and holding capabilities and not toughen the structure while still leaving it compact and familiar?" There Campo was born, with fabulous MagnaCut steel on the main blade!
Features:
* Blade
* Bottle opener
* Flat screwdriver
* Box opener
* Fork
* Scissors
* Phillips screwdriver
* Corkscrew
Intended Use: Hiking / Multipurpose
Production Type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut 61/63 HRC steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 67mm.
Blade thickness: 2.5mm.
Total length: 100mm.
Weight: 107g.
Closure: SlipJoint
Clip: -
Sheath: -
Packaging: Cardboard box with MKM logos
Notes: -MK-CP07MAG-BC -
MKM - Malga 5 - MagnaCut & Natural Micarta - MP05MAG-NC - Multipurpose Knife
A story of evolution:
One day a handful of guys were thinking about how to improve their multipurpose knife, a classic knife made and thought of over a century ago, but without having to integrate or think of additional functions since all possible tools had already been invented or proposed.
So one of these guys said, "Why don't we simply improve the steel of the blade to provide better cutting and holding capabilities and not toughen the structure while still leaving it compact and familiar?" There Malga was born, with fabulous MagnaCut steel on the main blade!
Features:
* Blade
* Small serrated blade
* Scissors
* Wood saw
* Phillips screwdriver
Intended Use: Hiking / Multipurpose
Production type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut 61/63 HRC steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 67mm.
Blade thickness: 2.5mm.
Total length: 100mm.
Weight: 105g.
Closure: SlipJoint
Clip: -
Sheath: -
Packaging: Cardboard box with MKM logos
Notes: -MK-MP05MAG-NC -
MKM - Malga 5 - MagnaCut & Green Micarta - MP05MAG-GC - Multipurpose Knife
A story of evolution:
One day a handful of guys were thinking about how to improve their multipurpose knife, a classic knife made and thought of over a century ago, but without having to integrate or think of additional functions since all possible tools had already been invented or proposed.
So one of these guys said, "Why don't we simply improve the steel of the blade to provide better cutting and holding capabilities and not toughen the structure while still leaving it compact and familiar?" There Malga was born, with fabulous MagnaCut steel on the main blade!
Features:
* Blade
* Small serrated blade
* Scissors
* Wood saw
* Phillips screwdriver
Intended Use: Hiking / Multipurpose
Production type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut 61/63 HRC steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 67mm.
Blade thickness: 2.5mm.
Total length: 100mm.
Weight: 105g.
Closure: SlipJoint
Clip: -
Sheath: -
Packaging: Cardboard box with MKM logos
Notes: -MK-MP05MAG-GC -
MKM - Malga 5 - MagnaCut & Black Micarta - MP05MAG-BC - Multipurpose Knife
A story of evolution:
One day a handful of guys were thinking about how to improve their multipurpose knife, a classic knife made and thought of over a century ago, but without having to integrate or think of additional functions since all possible tools had already been invented or proposed.
So one of these guys said, "Why don't we simply improve the steel of the blade to provide better cutting and holding capabilities and not toughen the structure while still leaving it compact and familiar?" There Malga was born, with fabulous MagnaCut steel on the main blade!
Features:
* Blade
* Small serrated blade
* Scissors
* Wood saw
* Phillips screwdriver
Intended Use: Hiking / Multipurpose
Production type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut 61/63 HRC steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 67mm.
Blade thickness: 2.5mm.
Total length: 100mm.
Weight: 105g.
Closure: SlipJoint
Clip: -
Sheath: -
Packaging: Cardboard box with MKM logos
Notes: -MK-MP05MAG-BC -
MKM - Malga 6 - MagnaCut & Natural Micarta - MP06MAG-NC - Multipurpose Knife
A story of evolution:
One day a handful of guys were thinking about how to improve their multipurpose knife, a classic knife made and thought of over a century ago, but without having to integrate or think of additional functions since all possible tools had already been invented or proposed.
So one of these guys said, "Why don't we simply improve the steel of the blade to provide better cutting and holding capabilities and not toughen the structure while still leaving it compact and familiar?" There Malga was born, with fabulous MagnaCut steel on the main blade!
Features:
* Blade
* Bottle opener
* Flat screwdriver
* Box opener
* Fork
* Reamer
* Corkscrew
Intended Use: Hiking / Multipurpose
Production type: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut 61/63 HRC steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 67mm.
Blade thickness: 2.5mm.
Total length: 100mm.
Weight: 79g.
Locking system: SlipJoint
Clip: -
Sheath: -
Packaging: Cardboard box with MKM logos
Notes: -MK-MP06MAG-NC -
MKM - Malga 6 - MagnaCut & Green Micarta - MP06MAG-GC - Multipurpose Knife
A story of evolution:
One day a handful of guys were thinking about how to improve their multipurpose knife, a classic knife made and thought of over a century ago, but without having to integrate or think of additional functions since all possible tools had already been invented or proposed.
So one of these guys said, "Why don't we simply improve the steel of the blade to provide better cutting and holding capabilities and not toughen the structure while still leaving it compact and familiar?" There Malga was born, with fabulous MagnaCut steel on the main blade!
Features:
* Blade
* Bottle opener
* Flat screwdriver
* Box opener
* Fork
* Reamer
* Corkscrew
Intended Use: Hiking / Multipurpose
Production type: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut 61/63 HRC steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 67mm.
Blade thickness: 2.5mm.
Total length: 100mm.
Weight: 79g.
Locking system: SlipJoint
Clip: -
Sheath: -
Packaging: Cardboard box with MKM logos
Notes: -MK-MP06MAG-GC -
MKM - TPF Defense by Terzuola - MagnaCut & Carbon Fiber - TPFD-CF - knife
Throughout his entire career, Robert "Bob" Terzuola was a pioneer in designing some of the Tactical knives ever made, and with TPF DEFENSE, we want to bring one of his most iconic designs back to life. To bring it up to date, we decided to make it shorter than the original and equip it with our magnetic leather sheath that makes it your perfect choice for EDC fixed blade... Nunquam Secundum
Intended Use: Tactical
Production type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut 61/63 HRC steel
Blade finish: Satin finish
Handle: Carbon Fiber
Blade Length: 83mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 90g.
Sheath: leather, made in italy, with magnetic attachment loop
Packaging: cardboard box with MKM logos
Notes: Design by Bob TerzuolaMK-TPFD-CF -
MKM - TPF Defense by Terzuola - MagnaCut & Red Dark Matter Carbon Fiber - TPFD-CFDRD - knife
Throughout his entire career, Robert "Bob" Terzuola was a pioneer in designing some of the Tactical knives ever made, and with TPF DEFENSE, we want to bring one of his most iconic designs back to life. To bring it up to date, we decided to make it shorter than the original and equip it with our magnetic leather sheath that makes it your perfect choice for EDC fixed blade... Nunquam Secundum
Intended Use: Tactical
Production type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut 61/63 HRC steel
Blade finish: Dark Stonewashed
Handle: Carbon Fiber Red Dark Matter
Blade Length: 83mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 90g.
Sheath: leather, made in italy, with magnetic attachment loop
Packaging: cardboard box with MKM logos
Notes: Design by Bob TerzuolaMK-TPFD-CFDRD -
MKM - Hero Knife by T. Rumici - Titanium and Marbled Carbon Fiber - MK HR-CFT - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: marbled carbon fiber grips, titanium liners and heads
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 170g.
Length when closed: 130mm.
Total length: 215mm.
Closure: Back Lock
Clip: titanium, removable, deep pocket type
Sheath: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-HR-CFT