bing
This site uses cookies to improve your experience while browsing the site. Out of these cookies, the cookies classified as necessary are stored in your browser as they are essential for the website's basic functionality to function. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to disable these cookies. However, disabling some of these cookies may have an effect on your browsing experience.
approved by Coltelleria Collini
Old Bear Limited Edition in SanMai Japanese Steel
Set Ascending Direction

Items 1-48 of 551

Page
  1. Boker Plus - Little Friend S35VN Flipper by Vox - 01BO385- knife

    Intended Use: Sporting

    Production type: Industrial
    Country of Production: Taiwan
    Blade: Stainless steel CPM-S35VN
    Blade treatment: Satin
    Handle: G10
    Blade length: 78.6mm.
    Blade thickness: 4mm.
    Length when closed: 108mm.
    Total length: 188mm.
    Weight: 135g.
    Clip: stainless steel, removable
    Closure: Liner Lock
    Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
    Notes: Design by Jesper Voxnaes

    BO-01BO385
    $121.91
    Only 2 left
    Only 2 left
  2. Rick Hinderer - XM-18 - Spanto 3.5" Gen II - Black + Desert G10 Scales - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased.
    * Condition: Overall in very good condition.
    * Commercially available: Discontinued, replaced by later Gen.
    * Sharpening: Factory sharpened, but improvable
    * Marks on blade: No
    * Marks on handle: Small marks on hardware.
    * Box: No
    * Scabbard: -
    * Manuals, Certificates and Warranties: No
    * Checked and Certified by our in-house laboratory





    Intended Use: Tactical / Collection 

    Type of production: Midtech (semi-craft)
    Country of manufacture: USA
    Blade: Stainless steel CPM-20CV
    Blade treatment: Stonewashed
    Handle: 3mm thick G10 black (+ one spare in desert color) on 1mm thick 6AL4V titanium liner. Frame in 4mm thick billet 6AL4V titanium with Hinderer Lockbar Stabilizer. 17-4PH stainless steel spacers and hardware.
    Blade length: 90mm.
    Blade thickness: 4mm.
    Length closed: 120mm.
    Total length: 207mm.
    Thickness when closed: 13mm.
    Weight: 175g.
    Closure: frame lock type
    Clip: stainless steel 17-4PH
    Notes: coyote paracord lanyard - second G10 scale, original Hinderer, in desert color - knife from private collection, previously purchased - product does not fall under "Loyalty" discounts

    XM18-CP
    $745.49
    Only 1 left
    Only 1 left
  3. MKM - Flame Light Flipper Knife by Zieba - Green Micarta - FL02L-BC - knife

    FLAME LIGHT, practical folding knife and now even lighter.

    BOHLER M390 dark stone washed steel dagger point blade, flipper opening with rotation mechanism with ball bearings and Liner lock closing system.
    Stonewashed stainless steel spacer and clip, stainless steel screws and ring on central pin in bronze anodized titanium.

    Black micarta canvas handle.
    Sold with nylon sheath with zip and belt loop.

    Intended use: Sports

    Total length: 176 mm - 6.93 "
    Blade length: 72 mm - 2.83 "
    Blade thickness: 2.5 mm - 0.10 "
    Weight: 55 gr - 2.08 oz
    Blade steel: Bohler M390
    Blade steel hardness: HRC 58/60
    Blade finish: Stonewash
    Opening system: Flipper
    Locking system: Liner lock
    Handle material: Micarta Canvas
    Handle color: Green
    Sheath: Cordura sheath
    Designer: Michael Zieba

    MKMFL02L-BC
    $153.48
    Only 1 left
    Only 1 left
  4. BlackFox - Nu-Bowie by Kean Alfaro - Green Micarta - BF-758MI - folding knife

    Intended Use: Sporting

    Type of production: Industrial
    Country of Production: China
    Blade: D2 steel
    Blade treatment: stonewashed
    Handle: micarta
    Blade length: 65mm.
    Blade thickness: 3mm.
    Total length: 148mm.
    Weight: 80g.
    Clip: stainless steel, removable and reversible, deep pocket type
    Closure: Button Lock
    Packaging: cardboard box with BlackFox logos
    Notes: Design by Kean Alfaro

     

    BF-758MI
    $46.48
    Only 2 left
    Only 2 left
  5. BlackFox - Nu-Bowie by Kean Alfaro - Brown Micarta - BF-758MIB - folding knife

    Intended Use: Sporting

    Production type: Industrial
    Country of Production: China
    Blade: D2 steel
    Blade treatment: stonewashed
    Handle: micarta
    Blade length: 65mm.
    Blade thickness: 3mm.
    Total length: 148mm.
    Weight: 80g.
    Clip: stainless steel, removable and reversible, deep pocket type
    Closure: Button Lock
    Packaging: cardboard box with BlackFox logos
    Notes: Design by Kean Alfaro

     

    BF-758MIB
    $46.48
    Only 3 left
    Only 3 left
  6. BlackFox - Nu-Bowie by Kean Alfaro - Black G10 - BF-758 - folding knife

    Intended Use: Sporting

    Type of production: Industrial
    Country of Production: China
    Blade: D2 steel
    Blade finish: black coating
    Handle: G10
    Blade length: 65mm.
    Blade thickness: 3mm.
    Total length: 148mm.
    Weight: 80g.
    Locking system: Button Lock
    Clip: stainless steel, removable and reversible, deep pocket type
    Packaging: cardboard box with BlackFox logos
    Notes: Design by Kean Alfaro

     

    BF-758
    $46.48
    Only 2 left
    Only 2 left
  7. Viper - Orso 2 by Jens Anso - Dark Stonewashed Titanium - V5997TI - Knife

    Intended Use: Sporting/Collection

    Production type: Industrial
    Country of Production: Italy
    Blade: Sintered stainless steel Lohmann LO-QPM20-4
    Blade finish: Dark Stonewashed
    Handle: GR5 Dark Stonewashed Titanium with anodized titanium spacer
    Blade length: 95mm.
    Blade thickness: 4mm.
    Length closed: 120mm.
    Total length: 208mm.
    Thickness when closed: 12mm.
    Weight: 137g.
    Closure: Frame Lock
    Clip: anodized titanium
    Packaging: cardboard box with Viper logos
    Notes: Design by Jens Anso

    V5997TI
    $235.92
    Only 2 left
    Only 2 left
  8. Viper - Orso 2 by Jens Anso - 3D Titanium - V5996TI3D - Knife

    Intended Use: Sporting/Collection

    Production type: Industrial
    Country of Production: Italy
    Blade: Sintered stainless steel Lohmann LO-QPM20-4
    Blade finish: Satin finish
    Handle: Titanium GR5 with anodized titanium spacer
    Blade length: 95mm.
    Blade thickness: 4mm.
    Length closed: 120mm.
    Total length: 208mm.
    Thickness when closed: 12mm.
    Weight: 137g.
    Closure: Frame Lock
    Clip: anodized titanium
    Packaging: cardboard box with Viper logos
    Notes: Design by Jens Anso

    V5996TI3D
    $235.92
    Only 1 left
    Only 1 left
  9. Boker Plus - Aluma Flipper Folder by E. Manasherov - 01BO463 - knife

    Intended Use: Sporting/collection

    Production type: Industrial
    Country of Production: Taiwan
    Blade: D2 steel
    Blade finish: stonewashed
    Handle: aluminum with wood insert
    Blade length: 91mm.
    Blade thickness: 3.6mm.
    Total length: 220mm.
    Weight: 123g.
    Clip: stainless steel, removable
    Closure: liner lock
    Packaging: cardboard box with Boker Plus logos, zippered pouch, warranty certificate
    Notes: Design by Eran Manasherov

     

    BO-01BO463
    $86.83
    Only 2 left
    Only 2 left
    Rating:
    93%
    4.7
  10. Zero Tolerance - Hinderer 566 with 3 handles - ZT0566CF - PRIVATE COLLECTION - knife

    Discontinued and no longer available model designed by Hinderer - Knife withdrawn from private collection, globally in excellent condition, with factory sharpening and original box - Originally with Carbon Fiber grip (included), accompanied by 2 additional aftermarket G10 grips and additional bronze-colored anodized titanium hardware - All original Zero Tolerance hardware is also included in the package - Checked and certified by our in-house laboratory.

    Intended Use: Sporting/Tactical

    Type of production: Industrial
    Country of Production: USA
    Blade: Elmax stainless steel
    Blade Finish: Stonewashed
    Handle: Stainless Steel and (originally) Carbon Fiber + 2 additional G10 grips
    Blade Length: 82mm.
    Blade thickness: 3mm.
    Length closed: 113mm.
    Total length: 196mm.
    Thickness when closed: 12mm.
    Weight: 145g.
    Closure: Frame Lock
    Clip: stainless steel, removable and multi-position (only on the carbon fiber gauntlet)
    Packaging: cardboard box with Zero Tolerance logos
    Notes: Design by Rick Hinderer - SpeedSafe opening system - Knife withdrawn from private collection equipped with 2 additional aftermarket G10 cheek pieces and custom titanium hardware, with bronze-colored anodizing

    CP-ZT566CF
    $276.27
    Only 1 left
    Only 1 left
  11. Lionsteel - L.E.One Flipper Karambit by Emerson - Black and Chemical Black - LE1 A BB - knife

    lionSTEEL-Emerson ONE is the new SOLID® Karambit knife developed in collaboration with Emerson Design.

    The Solid frame-lock handle, already a distinguishing feature of lionSTEEL, is machined from a solid piece of Ergal aluminum, while the blade is made of CPM MagnaCut steel.

    Other built-in features make the knife more comfortable and safer to use, allowing the end user to choose how to use it:

    * REF (REmovable Flipper system): this feature allows you to choose how to use the knife, if you don't want the flipper you can unscrew it and remove it using the torx tool and insert the second "cap" screw that fits perfectly into the hole at the bottom of the blade.

    * Wave: Ernest Emerson's patented system that allows the blade to catch on the pocket of the pants, on extraction, allowing it to open automatically with the right motion.

     


    Intended Use: Sporting/Tactical

    Production Type: Industrial
    Country of Production: Italy
    Blade: CPM MagnaCut 62/63HRC steel
    Blade Finish: Chemical Black
    Handle: Aluminum, Solid, billet machined
    Blade Length: 82mm.
    Blade thickness: 4mm.
    Total length: 210mm.
    Weight: 134g.
    Closure: Frame Lock with stainless steel casement
    Clip: stainless steel, reversible and removable
    Packaging: cardboard box with LionSteel logos
    Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Emerson Wave opening system - Removable Carson Flipper opening system - Ball bearing opening movement - Design by Ernst Emerson

    LS-LE1ABB
    Special Price $187.69 Regular Price $199.97
    Only 5 left
    Only 5 left
    Rating:
    100%
    5
  12. Lionsteel - L.E.One Flipper Karambit by Emerson - Green and Chemical Black - LE1 A GB - knife

    lionSTEEL-Emerson ONE is the new SOLID® Karambit knife developed in collaboration with Emerson Design.

    The Solid frame-lock handle, already a distinguishing feature of lionSTEEL, is machined from a solid piece of Ergal aluminum, while the blade is made of CPM MagnaCut steel.

    Other built-in features make the knife more comfortable and safer to use, allowing the end user to choose how to use it:

    * REF (REmovable Flipper system): this feature allows you to choose how to use the knife, if you don't want the flipper you can unscrew it and remove it using the torx tool and insert the second "cap" screw that fits perfectly into the hole at the bottom of the blade.

    * Wave: Ernest Emerson's patented system that allows the blade to hook into the pocket of the pants, on extraction, allowing it to open automatically with the right motion.

     


    Intended Use: Sporting/Tactical

    Production Type: Industrial
    Country of Production: Italy
    Blade: CPM MagnaCut 62/63HRC steel
    Blade Finish: Chemical Black
    Handle: Aluminum, Solid, billet machined
    Blade Length: 82mm.
    Blade thickness: 4mm.
    Total length: 210mm.
    Weight: 134g.
    Closure: Frame Lock with stainless steel casement
    Clip: stainless steel, reversible and removable
    Packaging: cardboard box with LionSteel logos
    Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Emerson Wave opening system - Removable Carson Flipper opening system - Ball bearing opening movement - Design by Ernst Emerson

    LS-LE1AGB
    Special Price $187.69 Regular Price $199.97
    Only 4 left
    Only 4 left
  13. Lionsteel - L.E.One Flipper Karambit by Emerson - Brown and Stonewashed - LE1 A ES - knife

    lionSTEEL-Emerson ONE is the new SOLID® Karambit knife developed in collaboration with Emerson Design.

    The Solid frame-lock handle, already a distinguishing feature of lionSTEEL, is machined from a solid piece of Ergal aluminum, while the blade is made of CPM MagnaCut steel.

    Other built-in features make the knife more comfortable and safer to use, allowing the end user to choose how to use it:

    * REF (REmovable Flipper system): this feature allows you to choose how to use the knife, if you don't want the flipper you can unscrew it and remove it using the torx tool and insert the second "cap" screw that fits perfectly into the hole at the bottom of the blade.

    * Wave: Ernest Emerson's patented system that allows the blade to hook into the pocket of the pants, on extraction, allowing it to open automatically with the right motion.

     


    Intended Use: Sporting/Tactical

    Production Type: Industrial
    Country of Production: Italy
    Blade: CPM MagnaCut 62/63HRC steel
    Blade Finish: Stonewashed
    Handle: Aluminum, Solid, billet machined
    Blade Length: 82mm.
    Blade thickness: 4mm.
    Total length: 210mm.
    Weight: 134g.
    Closure: Frame Lock with stainless steel casement
    Clip: stainless steel, reversible and removable
    Packaging: cardboard box with LionSteel logos
    Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Emerson Wave opening system - Removable Carson Flipper opening system - Ball bearing opening movement - Design by Ernst Emerson

    LS-LE1AES
    $187.69
    Only 3 left
    Only 3 left
  14. Lionsteel - L.E.One Flipper Karambit Knife by Emerson - Red and Stonewashed - LE1 A RS - knife

    lionSTEEL-Emerson ONE is the new SOLID® Karambit knife developed in collaboration with Emerson Design.

    The Solid frame-lock handle, already a distinguishing feature of lionSTEEL, is machined from a solid piece of Ergal aluminum, while the blade is made of CPM MagnaCut steel.

    Other built-in features make the knife more comfortable and safer to use, allowing the end user to choose how to use it:

    * REF (REmovable Flipper system): this feature allows you to choose how to use the knife, if you don't want the flipper you can unscrew it and remove it using the torx tool and insert the second "cap" screw that fits perfectly into the hole at the bottom of the blade.

    * Wave: Ernest Emerson's patented system that allows the blade to hook into the pocket of the pants, on extraction, allowing it to open automatically with the right motion.

     


    Intended Use: Sporting/Tactical

    Production Type: Industrial
    Country of Production: Italy
    Blade: CPM MagnaCut 62/63HRC steel
    Blade Finish: Stonewashed
    Handle: Aluminum, Solid, billet machined
    Blade Length: 82mm.
    Blade thickness: 4mm.
    Total length: 210mm.
    Weight: 134g.
    Closure: Frame Lock with stainless steel casement
    Clip: stainless steel, reversible and removable
    Packaging: cardboard box with LionSteel logos
    Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Emerson Wave opening system - Removable Carson Flipper opening system - Ball bearing opening movement - Design by Ernst Emerson

    LS-LE1ARS
    $187.69
    Only 2 left
    Only 2 left
  15. Lionsteel - L.E.One Flipper Karambit by Emerson - Black and Stonewashed - LE1 A BS - knife

    lionSTEEL-Emerson ONE is the new SOLID® Karambit knife developed in collaboration with Emerson Design.

    The Solid frame-lock handle, already a distinguishing feature of lionSTEEL, is machined from a solid piece of Ergal aluminum, while the blade is made of CPM MagnaCut steel.

    Other built-in features make the knife more comfortable and safer to use, allowing the end user to choose how to use it:

    * REF (REmovable Flipper system): this feature allows you to choose how to use the knife, if you don't want the flipper you can unscrew it and remove it using the torx tool and insert the second "cap" screw that fits perfectly into the hole at the bottom of the blade.

    * Wave: Ernest Emerson's patented system that allows the blade to catch on the pocket of the pants, on extraction, allowing it to open automatically with the right motion.

     


    Intended Use: Sporting/Tactical

    Production Type: Industrial
    Country of Production: Italy
    Blade: CPM MagnaCut 62/63HRC steel
    Blade Finish: Stonewashed
    Handle: Aluminum, Solid, billet machined
    Blade Length: 82mm.
    Blade thickness: 4mm.
    Total length: 210mm.
    Weight: 134g.
    Closure: Frame Lock with stainless steel casement
    Clip: stainless steel, reversible and removable
    Packaging: cardboard box with LionSteel logos
    Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Emerson Wave opening system - Removable Carson Flipper opening system - Ball bearing opening movement - Design by Ernst Emerson

    LS-LE1ABS
    $187.69
    Only 1 left
    Only 1 left
  16. Boker Plus - Collection Flipper Folder 2022 by Jens Anso - Limited Edition - 01BO2022 - knife

    Intended Use: Sporting/Collection

    Production type: Industrial
    Country of Production: Italy
    Blade: stainless steel M390 61HRC
    Blade treatment: satin finish
    Handle: titanium and carbon fiber with copper inserts
    Blade length: 88mm.
    Blade thickness: 4mm.
    Total length: 212mm.
    Weight: 142g.
    Clip: titanium, machined from billet
    Closure: frame lock
    Packaging: cardboard box with Boker Plus logos, zippered pouch, warranty certificate
    Notes: Design by Jens Anso - Limited edition of only 500 pieces numbered on blade, box and certificate

     

    BO-01BO2022
    $349.94
    Only 1 left
    Only 1 left
  17. Acta Non Verba - Z100 Flipper - Stonewashed Sleipner - Coyote G-10 - knife

    Timeless simplicity is the main reason why you will never get tired of your Z100.

    In our daily lives we look for things that become part of us, things that we will keep with us every day without even having to think about it. Thanks to the deep pocket clip, you won't even know you have it with you until the right moment comes. Then, as soon as you use it, you'll appreciate the flipper opening and sleipner steel blade.


    Intended Use: EDC / Sporting

    Production type: Industrial
    Country of Production: Czech Republic
    Blade: Sleipner steel 58HRC
    Blade Finish: Stonewashed
    Handle: G-10
    Blade length: 85mm.
    Blade thickness: 3.5mm.
    Total length: 205mm.
    Weight: 95g.
    Closing System: LinerLock
    Clip: deep pocket, removable and reversible, flush in stainless steel
    Package: Cardboard box with ANV logos
    Notes: at the base of the flipper there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife.

    ANV-Z100-012
    $118.41
    Only 2 left
    Only 2 left
  18. MKM - Maximo Flipper Knife Design by Bob Terzuola - Black Micarta - MK-MM-BCT - knife

    Intended Use: Sporting/EDC

    Production type: Industrial
    Country of Production: Maniago - Italy
    Blade: Stainless steel M390 60/61HRC
    Blade treatment: stonewashed
    Handle: canvas micarta and titanium grips, titanium spacers and screws
    Blade length: 86mm.
    Blade thickness: 4mm.
    Weight: 116g.
    Length when closed: 115mm.
    Total length: 197mm.
    Locking mechanism: Framelock
    Clip: titanium, removable, deep pocket type.
    Sheath: Synthetic material pouch with zipper closure and belt loop
    Package: Cardboard box with MKM Maniago Knife Makers logos 
    Notes: Tungsten carbide rear glass breaker - Design by Bob Terzuola

    MK-MM-BCT
    $206.10
    Only 1 left
    Only 1 left
  19. MKM - Maximo Flipper Design by Bob Terzuola - Green Micarta - MK-MM-GCT - folding knife

    Intended Use: Sporting/EDC

    Production type: Industrial
    Country of Production: Maniago - Italy
    Blade: Stainless steel M390 60/61HRC
    Blade treatment: stonewashed
    Handle: canvas micarta and titanium grips, titanium spacers and screws
    Blade length: 86mm.
    Blade thickness: 4mm.
    Weight: 116g.
    Length when closed: 115mm.
    Total length: 197mm.
    Closure: Framelock
    Clip: titanium, removable, deep pocket type.
    Scabbard: Synthetic material pouch with zipper closure and belt loop
    Package: Cardboard box with MKM Maniago Knife Makers logos 
    Notes: Tungsten carbide rear glass breaker - Design by Bob Terzuola

    MK-MM-GCT
    $206.10
    Only 2 left
    Only 2 left
  20. ExtremaRatio - G.O.I. Caimano Nero N.A. Flipper - Knife

    NON-automatic version of the Caimano Nero model

    The Black Caiman is a tactical knife that Extrema Ratio, official supplier of Comsubin, has developed and delivered to the G.O.I. (Gruppo Operativo Incursori) of the Italian Navy. Its name recalls and pays homage to the heroic Caimani Neri del Piave, a department of Arditi of the Regia Marina and other components on a voluntary basis, which during the First World War crossed the Piave River by swimming to carry out raids in enemy territory.

    Spear Point" 4 mm blade with asymmetrical rounding and partial sharpening of the counterbore to increase the penetration coefficient. The toothing on the blade allows you to cut cables and fabrics with high resistance preserving the sharpness.

    It is a medium folder with a robust structure. The thick aluminum cheeks, thanks to the many processes of removal make the knife light and balanced. The end of the handle, which recalls the shape of the Helix/Timon group of the slow running torpedo (S.L.C.), serves to improve the grip for the rapid extraction of the knife from the pocket.

    The DLC-coated titanium clip can be positioned at three different angles on either side to allow for maximum customization of the carry. Its shape is designed to minimize the bulk of the handle outside the pocket.

    Among its endowments, besides the carbide glass breaker, there is also a safety, that when inserted, preserves from a dangerous accidental closing of the blade.

     

    Destination of use: Tactical/Military

    Type of production: industrial
    Blade: stainless steel N690Co 58HRC
    Country of production: Italy
    Handle: Anticorodal
    Blade length: 93mm.
    Blade thickness: 4mm.
    Length closed: 140mm.
    Total lenght: 231mm.
    Weight: 180g.
    Closure: Liner Lock
    Clip: deep pocket, reversible and removable, in stainless steel
    Notes: Additional safety stop, when knife is open

    ER-CAI-NA
    $268.38
    Only 1 left
    Only 1 left
    Rating:
    95%
    4.8
  21. Boker Plus - Zenshin knife - Higonokami - 01BO368 - knife

    The elegant Boker Plus Zenshin is reminiscent of the famous Higonokami pocket knives, manufactured in the Japanese city of Miki since 1896. Unlike the original Japanese versions, the body of the knife handle is not made from a single piece of folded metal, but from flat plates in steel with a sturdy stonewash finish. The 440C slipjoint blade has an elaborate two-tone finish. It opens with two hands and does not lock. With lanyard hole.

    Intended use: Sports

    Type of production: Industrial
    Country of production: Asia
    Blade: 440C stainless steel
    Blade treatment: Dual Tone
    Handle: in steel
    Blade length: 75mm.
    Blade thickness: 2.5mm.
    Total length: 170mm.
    Weight: 60g.
    Clip: -
    Closure: frame lock
    Packaging: cardboard box with Boker Plus logos
    Note: -

    BO-01BO368
    $35.09
    Only 4 left
    Only 4 left
  22. Boker Plus - Zenshin 42 Brass knife - Higonokami - 01BO369 - knife

    The elegant Boker Plus Zenshin is reminiscent of the famous Higonokami pocket knives, manufactured in the Japanese city of Miki since 1896. Unlike the original Japanese versions, the body of the knife handle is not made of a single piece of folded metal, but of flat plates made of brass with a sturdy stonewash finish. The 440C slipjoint blade has an elaborate two-tone finish. It opens with two hands and does not lock. With lanyard hole.

    Intended use: Sports

    Type of production: Industrial
    Country of production: Asia
    Blade: 440C stainless steel
    Blade treatment: Dual Tone
    Handle: brass
    Blade length: 75mm.
    Blade thickness: 2.5mm.
    Total length: 170mm.
    Weight: 71g.
    Clip: -
    Closure: Slipjoint
    Packaging: cardboard box with Boker Plus logos
    Note: -

    BO-01BO369
    $35.09
    Only 5 left
    Only 5 left
  23. Boker Plus - Urban Spillo Flipjoint - men's knife - 01BO469 - knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: Asia
    Blade: in 440C stainless steel
    Blade treatment: Stonewash
    Handle: in steel
    Blade length: 76mm.
    Blade thickness: 3mm.
    Total height of the lung: 176 mm.
    Pesos: 67 g.
    Clip: removable, in stainless steel
    Closure: Slipjoint
    Packaging: cardboard box with Boker Plus logos
    Note: pinball opening system on ball bearings

     

    BO-01BO469
    $57.01
    Only 1 left
    Only 1 left
  24. Boker Plus - Connector Titan Knife - 01BO353 - folding knife

    The practical Connector of Boker Plus bears the unmistakable signature of the Polish cutler Jakub Wieczorkiewicz, now known all over the world for the quality of his production. The Connector is equipped with a spear point blade, CPM-S-35VN steel, on ball bearings. Made with an excellently machined titanium handle.

    Intended use: EDC / Sports

    Type of production: Industrial
    Country of production: Taiwan
    Blade: CPM-S35VN steel
    Blade treatment: satin finish
    Handle: Titanium
    Blade length: 75mm.
    Blade thickness: 3.2mm.
    Total length: 176mm.
    Weight: 88g.
    Clip: removable steel
    Closure: frame lock
    Packaging: cardboard box with Boker Plus logos
    Notes: opening via ball bearing system - design by Jakub Wieczorkiewicz

    BO-01BO353
    $127.17
    Only 2 left
    Only 2 left
  25. Boker Plus - Connector G10 Knife - 01BO354 - folding knife

    Intended use: EDC / Sports

    Type of production: Industrial
    Country of production: Taiwan
    Blade: D2 steel
    Blade treatment: satin finish
    Handle: G10
    Blade length: 75mm.
    Blade thickness: 3.2mm.
    Total length: 176mm.
    Weight: 78g.
    Clip: removable steel
    Closure: liner lock
    Packaging: cardboard box with Boker Plus logos
    Notes: opening by Carson Flipper system on ball bearings

     

    BO-01BO354
    $70.16
    Only 4 left
    Only 4 left
  26. Boker Plus - Urban Spillo Jade G10 - gentleman's knife - 01BO357 - knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: China
    Blade: in 440C stainless steel
    Blade treatment: black coating
    Handle: steel liners and jade G10 grips
    Blade length: 78mm.
    Blade thickness: 3mm.
    Total length: 176mm.
    Weight: 47g.
    Clip: removable, in stainless steel
    Closure: liner lock
    Packaging: cardboard box with Boker Plus logos, nylon case with zip
    Notes: pinball opening system on ball bearings

     

    BO-01BO357
    $52.62
    Only 2 left
    Only 2 left
  27. Boker Plus - Cataclyst Flipjoint Knife - 01BO675 - folding knife

    The Boker Plus Cataclyst Flipjoint features a flipper opening blade, it does not lock when open, but is simply held securely in place by a retaining ball. With appropriate pressure on the back of the blade, the blade can be folded back without releasing a locking device.

    The sleek design features a textured black G10 grip that is three-dimensionally milled and has a weight-saving recess inside. Supplied with a deep pocket clip and a drawstring hole.

    Intended use: EDC / Sports

    Type of production: Industrial
    Country of production: Taiwan
    Blade: 440C steel
    Blade treatment: satin finish
    Handle: steel and G10
    Blade length: 75mm.
    Blade thickness: 4mm.
    Total length: 173mm.
    Weight: 77g.
    Clip: monolithic, removable
    Closure: slipjoint
    Packaging: cardboard box with Boker Plus logos
    Notes: opening by Carson Flipper system on ball bearings

    BO-01BO675
    $38.59
    Only 2 left
    Only 2 left
  28. Boker Plus - Kwaiken Air G10 Black by Lucas Burnley - 01BO339 - knife

    Intended Use: Sporting

    Production type: Industrial
    Country of Production: Taiwan
    Blade: Stainless steel VG10
    Blade treatment: black coating
    Handle: steel liners and G10 grips
    Blade length: 90mm.
    Blade thickness: 2.5mm.
    Total lenght: 213mm.
    Weight: 82g.
    Clip: removable, stainless steel
    Closure: liner lock
    Package: cardboard box with Boker Plus logos, nylon case with zipper 
    Notes: Design by Lucas Burnley - ball bearing flipper opening system

     

     

    BO-01BO339
    $85.07
    Only 1 left
    Only 1 left
  29. Boker Plus - Aphex Mini knife by Burnley - 01BO197 - folding knife

    The modern Boker Plus Aphex Mini is the scaled-down version of the Boker Plus Collection 2020 designed by Lucas Burnley. The finely sharpened blade is made from VG-10 and comes with an impressive finish. Thanks to the ball bearings and pinball machine, the knife is particularly easy to open. The ergonomically shaped handle is three-dimensionally milled from titanium and decorated with a modern carbon fiber inlay.

    Intended use: Collection

    Type of production: Industrial
    Country of production: Taiwan
    Blade: in VG10 steel
    Blade treatment: Satin
    Handle: titanium with carbon fiber insert
    Blade length: 78mm.
    Blade thickness: 3mm.
    Closed length: 130mm.
    Total length: 96mm.
    Weight: 78g.
    Clip: titanium
    Closure: Frame Lock
    Packaging: cardboard box with Boker Plus logos, Nylon case with zip
    Notes: Design by Burnley

    BO-01BO197
    $122.78
    Only 2 left
    Only 2 left
  30. Fox - Yaru by Vox - Special Edition In SanMai SPG2 Steel - Space Coral Carbon Fiber - CO-527CF - knife

    With this exclusive edition of Coltelleria Collini in collaboration with Fox we chose to match a model with a particular design like the Yaru with a Japanese powder (sintered) and rolled steel (SanMai) by Takefu Steel. 

    For this project we chose to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and sharpening durability, while at the same time ensuring a remarkable resilience and resistance to oxidation due to the blade lamination process. 

     


    Intended Use: Sporting / Collection

    Production type: Industrial
    Country of Production: Italy
    Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
    Blade Treatment: Satinized
    Sleeve and screws: carbon fiber "Space Coral", Frame and screws in Titanium PVD Stonewashed
    Blade length: 70mm.
    Blade thickness: 4mm.
    Length closed: 105m.
    Total length: 175mm.
    Thickness when closed: 16mm
    Weight: 95g.
    Closure: Frame Lock with stainless steel casement
    Clip: Stonewashed PVD titanium, billet machined
    Scabbard: Zip pouch
    Package: Cardboard box with Fox Knives logos 
    Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive Coltelleria Collini's version, Sprint Run in only 6 not numbered pieces, with Japanese stainless steel Takefu Steel SPG2 Rolled.

     


    The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

     


    - Longer cutting edge life
    thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.

    - Greater resilience
    Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Improved corrosion resistance
    The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

    - Easy machining even after heat treatment
    Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

    - Improved aesthetic performance
    Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    CO-527CF
    $311.35
    Only 3 left
    Only 3 left
    Rating:
    100%
    5
  31. Fox - Yaru by Vox - Special Edition In SanMai SPG2 Steel - Blue Titanium - CO-527TI - knife

    With this exclusive edition of Coltelleria Collini in collaboration with Fox we have chosen to match a model with a particular design like the Yaru with a Japanese powder (sintered) and rolled steel (SanMai) by Takefu Steel. 

    For this project we chose to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and sharpening durability, while at the same time ensuring a remarkable resilience and resistance to oxidation due to the blade lamination process. 

     


    Intended Use: Sporting / Collection

    Production type: Industrial
    Country of Production: Italy
    Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
    Blade Treatment: Satinized
    Handle and screws: Titanium anodized HDL
    Blade length: 70mm.
    Blade thickness: 4mm.
    Length closed: 105m.
    Total length: 175mm.
    Thickness when closed: 16mm
    Weight: 105g.
    Closure: Frame Lock with stainless steel hinge
    Clip: HDL anodized Titanium, billet machined
    Scabbard: Zip pouch
    Package: Cardboard box with Fox Knives logos 
    Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive version by Coltelleria Collini, Sprint Run in only 6 not numbered pieces, with Japanese stainless steel Takefu Steel SPG2 Rolled.

     


    The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

     


    - Longer cutting edge life
    thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.

    - Greater resilience
    Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Improved corrosion resistance
    The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

    - Easy machining even after heat treatment
    Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

    - Improved aesthetic performance
    Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    CO-527TI
    $262.24
    Only 2 left
    Only 2 left
  32. Fox - Yaru by Vox - Special Edition In SanMai SPG2 Steel - PVD Stonewashed - CO-527TIPVD - knife

    With this exclusive edition of Coltelleria Collini in collaboration with Fox we have chosen to match a model with a particular design like the Yaru with a Japanese powder (sintered) and rolled steel (SanMai) by Takefu Steel. 

    For this project we chose to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and sharpening durability, while at the same time ensuring a remarkable resilience and resistance to oxidation due to the blade lamination process. 

     


    Intended Use: Sporting / Collection

    Production type: Industrial
    Country of Production: Italy
    Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
    Blade Treatment: Satinized
    Handle and screws: Stonewashed PVD Titanium and screws in titanium anodized bronze
    Blade length: 70mm.
    Blade thickness: 4mm.
    Length closed: 105m.
    Total length: 175mm.
    Thickness when closed: 16mm
    Weight: 105g.
    Closure: Frame Lock with stainless steel hinge
    Clip: HDL anodized Titanium, billet machined
    Scabbard: Zip pouch
    Package: Cardboard box with Fox Knives logos 
    Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive version by Coltelleria Collini, Sprint Run in only 6 not numbered pieces, with Japanese stainless steel Takefu Steel SPG2 Rolled.

     


    The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

     


    - Longer cutting edge life
    thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.

    - Greater resilience
    Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Improved corrosion resistance
    The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

    - Easy machining even after heat treatment
    Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

    - Improved aesthetic performance
    Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    CO-527TIPVD
    $276.27
    Only 1 left
    Only 1 left
  33. Zero Tolerance - ZT0990 knife - CPM 20CV - Carbon Fiber - knife

    Based on the award-winning ZT 0999, the 0990 simplifies this legendary design. Despite the skeletonized structure, this ZT is reliable and robust thanks to the steel structure.

    Intended use: Sports / Tactical / Collection

    Type of production: Industrial
    Country of production: USA
    Blade: CPM-20CV stainless steel
    Blade treatment: Stonewashed
    Handle: Carbon fiber and steel
    Blade length: 83mm.
    Blade thickness: 3mm.
    Closed length: 114mm.
    Total length: 193mm.
    Thick when closed: 114mm.
    Weight: 82g.
    Closure: liner lock
    Clip: Removable, in titanium
    Packaging: cardboard box with Zero Tolerance logos
    Notes: flipper opening system on ball bearings - Manual KVT ball bearings

    ZT0990
    $254.34
    Only 3 left
    Only 3 left
  34. Zero Tolerance - ZT0762 knife - CPM 20CV - Carbon Fiber - knife

    Intended use: Sports / Tactical / Collection

    Type of production: Industrial
    Country of production: USA
    Blade: CPM-20CV stainless steel
    Blade treatment: Stonewashed
    Handle: Black carbon fiber with aluminum spacers
    Blade length: 86mm.
    Blade thickness: 3mm.
    Closed length: 126mm.
    Total length: 206mm.
    Thick when closed: 112mm.
    Weight: 82g.
    Closure: Sub Framelock in hardened steel
    Clip: Removable, in titanium
    Packaging: cardboard box with Zero Tolerance logos
    Notes: Tuned Detent System (TDS ™) opening system

    ZT0762
    $372.75
    Only 2 left
    Only 2 left
  35. Fox - Core knife by Vox - FX-604R - Red - knife

    Intended use: sporting

    Production type: Industrial
    Country of Production: Italy
    Blade: Stainless steel N690 59/60HRC
    Blade finish: stonewashed
    Handle: FRN (fiberglass reinforced nylon) with internal stainless steel folders
    Blade length: 75mm.
    Blade thickness: 4mm.
    Length closed: 103m.
    Total length: 188mm.
    Sleeve thickness: 18mm
    Weight: 135g.
    Locking mechanism: Liner Lock
    Clip: Removable and reversible, in stainless steel
    Package: Cardboard box with Fox Knives logos 
    Notes: Flipper type opening on ball bearings - Design by Jesper Voxnaes

    FX-604R
    $100.86
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  36. Boker Plus - HEA Hunter knife - Blue G10 - D2 steel - 01BO193 - knife

    Intended use: Sports / collection

    Type of production: Industrial
    Country of production: Taiwan
    Blade: D2 steel
    Blade treatment: satin
    Handle: in G10 Blue / gray
    Blade length: 702mm.
    Blade thickness: 3mm.
    Total length: 170mm.
    Weight: 93g.
    Clip: in stainless steel
    Closure: liner lock
    Packaging: cardboard box with Boker Plus logos, nylon case with zip
    Notes: pinball opening system on ball bearings - designed by Sam Abdelrahman

     

    BO-01BO193
    $92.97
    Only 1 left
    Only 1 left
  37. Boker Plus - Golem knife - 01BO192 - knife

    Intended use: Sports / collection

    Type of production: Industrial
    Country of production: Taiwan
    Blade: D2 steel
    Blade treatment: stonewash
    Handle: in G10
    Blade length: 89mm.
    Blade thickness: 4mm.
    Total length: 205mm.
    Weight: 148g.
    Clip: in stainless steel
    Closure: liner lock
    Packaging: cardboard box with Boker Plus logos, nylon case with zip
    Notes: pinball opening system on ball bearings

     

    BO-01BO192
    $65.78
    Only 3 left
    Only 3 left
  38. Boker Plus - Urban Trapper Cocobolo Damascus knife by Brad Zinker - 01BO176DAM - folding knife

    Intended use: Gentleman / Sportsman

    Type of production: Industrial
    Country of production: Taiwan
    Blade: in stainless steel damascus
    Blade treatment: satin finish
    Handle: titanium frame with cocobolo grips
    Blade length: 88mm.
    Blade thickness: 2.5mm.
    Total length: 195mm.
    Weight: 54g.
    Clip: titanium
    Closure: Liner lock
    Packaging: cardboard box with Boker Plus logos
    Notes: Design by Brad Zinker

     

    01BO176DAM
    $125.42
    Only 2 left
    Only 2 left
  39. Fox - Eastwood Tiger by Gudy Van Poppel - Black G10 - FX-524B - knife

    Intended Use: Sporting / Tactical

    Production type: Industrial
    Country of Production: Italy
    Blade: Steel D2 59/61HRC
    Blade finish: Black Idroglider
    Handle: G10 with aluminum spacer
    Blade length: 95mm.
    Blade thickness: 4mm.
    Length closed: 132mm.
    Total length: 227mm.
    Thickness when closed: 14mm.
    Weight: 175g.
    Closure: Liner Lock
    Clip: removable, in stainless steel AISI 420J2B with Black Idroglider treatment
    Sheath: leather, felt and nylon pouch, with zipper
    Package: Cardboard box with Fox Knives logos 
    Notes: Design by Gudy Van Poppel - Opening movement on ball bearings - Carson Flipper opening system

    FX-524B
    $157.87
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  40. Boker Plus - Kwaiken Mini Flipper G10 by Lucas Burnley - 01BO268 - knife

    Intended Use: Sporting/Collection

    Production type: Industrial
    Country of Production: Taiwan
    Blade: D2 steel
    Blade treatment: satin finish
    Handle: Stainless steel and G10
    Blade length: 78mm.
    Blade thickness: 3.2mm.
    Total length: 184mm.
    Weight: 81g.
    Clip: removable, stainless steel
    Closure: liner lock
    Package: cardboard box with Boker Plus logos
    Notes: Design by Lucas Burnley - ball bearing flipper opening system

     

    BO-01BO268
    $127.17
    Only 1 left
    Only 1 left
  41. Boker Plus - Kwaiken Air Mini G10 Jade by Lucas Burnley - 01BO331 - knife

    Intended Use: Sporting

    Production type: Industrial
    Country of Production: Taiwan
    Blade: Stainless steel VG10
    Blade treatment: black coating
    Handle: steel liners and jade G10 grips
    Blade length: 78mm.
    Blade thickness: 2.5mm.
    Total length: 183mm.
    Weight: 60g.
    Clip: removable, stainless steel
    Closure: liner lock
    Package: cardboard box with Boker Plus logos, nylon case with zipper 
    Notes: Design by Lucas Burnley - ball bearing flipper opening system

     

    BO-01BO331
    $70.16
    Only 2 left
    Only 2 left
  42. Boker Plus - Kwaiken Compact Flipper Marble Carbon by Lucas Burnley - 01BO231 - knife

    Intended Use: Sporting/Collection

    Production type: Industrial
    Country of Production: Taiwan
    Blade: D2 steel
    Blade treatment: satin finish
    Handle: titanium and carbon fiber marbled
    Blade length: 77mm.
    Blade thickness: 3.5mm.
    Total length: 183mm.
    Weight: 75g.
    Clip: stainless steel
    Closure: frame lock
    Package: cardboard box with Boker Plus logos, nylon pouch with zipper
    Notes: Design by Lucas Burnley - ball bearing flipper opening system

     

    BO-01BO231
    $125.41
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  43. Boker Plus - Kaizen Flipper Green Micarta - 01BO391 - knife

    Intended Use: EDC / Sporting

    Production Type: Industrial
    Country of Production: Taiwan
    Blade: D2 steel
    Blade treatment: black coating
    Handle: micarta
    Blade length: 76mm.
    Blade thickness: 1.9mm.
    Total lenght: 180mm.
    Weight: 44g.
    Clip: stainless steel, removable
    Closure: liner lock
    Package: cardboard box with Boker Plus logos, nylon pouch with zipper
    Notes: opening through "Minimalist Flipper" system on ball bearings.

     

    BO-01BO391
    $64.03
    Only 1 left
    Only 1 left
  44. Boker Plus - Kwaiken Air G10 Jade by Lucas Burnley - 01BO343 - knife

    Intended Use: Sporting

    Production type: Industrial
    Country of Production: Taiwan
    Blade: Stainless steel VG10
    Blade treatment: black coating
    Handle: steel liners and jade G10 grips
    Blade length: 90mm.
    Blade thickness: 2.5mm.
    Total length: 213mm.
    Weight: 82g.
    Clip: removable, stainless steel
    Closure: liner lock
    Package: cardboard box with Boker Plus logos, nylon case with zipper 
    Notes: Design by Lucas Burnley - ball bearing flipper opening system

     

    BO-01BO343
    $78.93
    Only 1 left
    Only 1 left
    Rating:
    93%
    4.7
  45. Boker Plus - Urban Trapper by Brad Zinker - 01BO318 - folding knife

    Intended use: Gentleman / Sportsman

    Type of production: Industrial
    Country of production: Taiwan
    Blade: VG-10 stainless steel
    Blade treatment: satin finish
    Handle: titanium frame with cocobolo grips
    Blade length: 80mm.
    Blade thickness: 2.5mm.
    Total length: 185mm.
    Weight: 51g.
    Clip: titanium
    Closure: Liner lock
    Packaging: cardboard box with Boker Plus logos
    Notes: Design by Brad Zinker

     

    BO-01BO318
    $94.72
    Only 1 left
    Only 1 left
  46. Boker Plus - Kwaiken Stubby Titanium by Lucas Burnley - 01BO226 - folding knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: Taiwan
    Blade: CPM-S-35VN stainless steel
    Blade treatment: stonewash
    Handle: steel liners and titanium grips
    Blade length: 54mm.
    Blade thickness: 3.2mm.
    Total length: 138mm.
    Weight: 91g.
    Clip: in stainless steel
    Closure: liner lock
    Packaging: cardboard box with Boker Plus logos
    Notes: Design by Lucas Burnley - IKBS opening system on ball bearings

     

    BO-01BO226
    $109.63
    Only 1 left
    Only 1 left
  47. BlackFox - B-Key - EDC Pocket Knife - OD Green - BF-750OD - knife

    Intended Use: EDC / Sporting

    Production Type: Industrial
    Country of Production: China
    Blade: 440A steel HRC 57-59
    Blade treatment: stone washed
    Handle: Anodized aluminum with 420J2B stainless steel liner
    Blade length: 45mm.
    Blade thickness: 4mm.
    Total length: 105mm.
    Weight: 70g.
    Clip: Stainless steel 420J2B, removable
    Closure: Frame Lock
    Packaging: Cardboard box with BlackFox logos
    Notes: -

    BF-750OD
    $29.38
    Only 2 left
    Only 2 left
  48. BlackFox - B-Key - EDC Pocket Knife - Blue - BF-750BL - knife

    Intended Use: EDC / Sporting

    Production Type: Industrial
    Country of Production: China
    Blade: 440A steel HRC 57-59
    Blade treatment: stone washed
    Handle: Anodized aluminum with 420J2B stainless steel liner
    Blade length: 45mm.
    Blade thickness: 4mm.
    Total length: 105mm.
    Weight: 70g.
    Clip: Stainless steel 420J2B, removable
    Closure: Frame Lock
    Packaging: Cardboard box with BlackFox logos
    Notes: -

    BF-750BL
    $29.38
    Out of stock
Set Ascending Direction

Items 1-48 of 551

Page