Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Spyderco - Silverax - CPM-S30V & Carbon Fiber - PRIVATE COLLECTION - C228CFP - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: New
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / CollectionProduction Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S30V
Blade Finish: Satin finish
Handle: Carbon Fiber and G10 Laminate
Blade Length: 88mm.
Blade thickness: 3.5mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 94g.
Closure: Compression Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collectionC228CFP-CP -
Spyderco - Pattada - N690Co & G10 - PRIVATE COLLECTION - C204GP - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: In very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks above the opening hole, right side blade (see photo)
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / CollectionType of Production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Satin finish
Handle: Stainless steel and G10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 121mm.
Total length: 221mm.
Weight: 119g.
Closure: Liner Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collectionC204GP-CP -
Peltonen Knives - M23 Ranger Cub Orange - FJP308 - puukko knife
The M23 Ranger Cub knife features a 6.5-centimeter carbon steel blade with an induction-hardened edge at 62 HRC. Remember that carbon steel always requires some care, so keep the blade clean and wash and dry it after each use. You can also apply a little oil to the blade from time to time. With proper care, corrosion is kept at bay and the blade remains intact.
The handle material is TPV, thermoplastic vulcanized, a type of rubber-like plastic material that resists wear, impact, chemicals and temperature changes almost indefinitely. The secure grip remains firm even in wet conditions.
Thanks to the Kydex sheath, the knife can be easily carried on the belt in a horizontal position.
Intended Use: Hiking / Hunting / BushcraftProduction type: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 62HRC
Blade treatment: Dual Tone
Handle: TPV (vulcanized thermoplastic)
Blade length: 65mm.
Blade thickness: 3.3mm.
Total length: 165mm.
Weight: 78g.
Sheath: Kydex
Packaging: Cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka PeltonenPE-FJP308 -
Boker Plus - Jim Wagner Reality-Based Tanto Blade - PRIVATE COLLECTION - 01BO051
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No since 2014
* Sharpening: Original
* Marks on blade: No
* Marks on handle: No
* Box: NOT present
* Checked and certified by our internal laboratory
Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim VagnerBO-01BO051 -
Benchmade - Station Kitchen Knife - DLC CPM-154CM & G10 with Carbon Fiber - 4010BK-01 - field kitchen knife
A minimalist workhorse: this ultra-versatile kitchen tool was built, designed and crafted to give you the best. From field to table, this unique knife combines the power and exceptional quality of Benchmade's proprietary SelectEdge technology for unparalleled cutting.
The wide CPM-154 blade extends to a precisely shaped handle that provides a comfortable grip for extended use. The knife comes with a plastic sheath that allows liquids to drain away from the knife thanks to drainage holes.
Intended Use: Universal household and field kitchen knife
Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-154CM 58/61HRC
Blade finish: Black DLC
Handle: G10 Green and Carbon Fiber
Blade length: 148mm.
Blade thickness: 2.5mm.
Total length: 273mm.
Weight: 179g.
Blade Cover: plastic material, with drainage holes
Packaging: Box made of cardboard and recycled materials, with Benchmade logos
Notes: designed to be used both in the home kitchen and on hikesBM-4010BK-01 -
Benchmade - Station Kitchen Knife - CPM-154CM & Tan Richlite - 4010-02 - field kitchen tool
A minimalist workhorse: this ultra-versatile kitchen tool was built, designed and crafted to give you the best. From field to table, this unique knife combines the power and exceptional quality of Benchmade's proprietary SelectEdge technology for unparalleled cutting.
The wide CPM-154 blade extends to a precisely shaped handle that provides a comfortable grip for extended use. The knife comes with a plastic sheath that allows liquids to drain away from the knife thanks to drainage holes.
Intended Use: Universal household and field kitchen knife
Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-154CM 58/61HRC
Blade Finish: Stonewashed
Handle: Tan Richlite and Black G10
Blade length: 148mm.
Blade thickness: 2.5mm.
Total length: 273mm.
Weight: 179g.
Blade Cover: plastic material, with drainage holes
Packaging: Box made of cardboard and recycled materials, with Benchmade logos
Notes: designed to be used both in the home kitchen and on hikesBM-4010-02 -
Boker Plus - Kirke by A. De Santis - Nitro-V & G10 - 01BO636 - knife
Delightfully tactical - Alessandra De Santis/Hydra Design enchants knife enthusiasts around the world with the irresistible charm of the Boker Plus Kirke, inspired by the goddess of sorcery of the same name from Greek mythology. Despite its bewitching magic, the Italian knife designer stays true to its tactical line and keeps the pocket knife in a muted black color.
The ball-bearing-opening blade, made of Nitro-V steel with an austere black stonewash finish can be operated either in flipper or with the generous thumb opening, while the push-button lock ensures intuitive knife release.
Pronounced finger recesses, fine texture on the G10 handle grips and a thumb recess on the back of the blade ensure a secure grip at all times and a high level of safety at work, even in the most adverse conditions.
Intended Use: Sporting/TacticalType of production: Industrial
Country of manufacture: China
Blade: Nitro-V stainless steel
Blade treatment: stonwashed
Handle: G10
Blade length: 86mm.
Blade thickness: 3.8mm.
Total length: 201m.
Weight: 100g.
Clip: removable and reversible, stainless steel
Closure: Button Lock
Packaging: cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings - design by Alessandra De SantisBO-01BO636 -
Boker Plus / Donges - Expert Fire Folder - Rescue Knife - 01DG007 - knife
Knives made in collaboration with Dönges are specialized tools for difficult and demanding rescue operations. What the products have in common are the red G10 handles with non-slip Dönges honeycomb structure, the incredibly tough and high-performance D2 steel blades and the presence of a glass breaker.
The Expert Fire Folder has two rescue blades that open in opposite directions. While the spear point blade is suitable for universal cutting tasks, the rescue blade has several multifunctional cutting surfaces. It has a serrated edge for ropes and a lever point with integrated nail extractor. A belt cutter is located directly behind the tip. Finally, the multifunctional blade has a bottle opener for a well-deserved break after use.
Intended Use: Emergency/RescueProduction type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: stainless steel and G10 folders
Blade length: 100mm.
Blade thickness: 3.2mm.
Total length: 235mm.
Weight: 315g.
Clip: removable and reversible, stainless steel
Closure: Liner Lock
Packaging: cardboard box with Donger logos, zippered nylon pouch
Notes: tungsten carbide rear glass breaker - Second emergency lever lock blade with crowbar, belt cutter and bottle opener - Carson Flipper type opening systemBO-01DG007 -
Boker Plus / Donges - Professional Fire Folder - Rescue Knife - 01DG004 - Knife
Knives made in collaboration with Dönges are specialized tools for difficult and demanding rescue operations. What the products have in common are the red G10 handles with non-slip Dönges honeycomb structure, the incredibly tough and high-performance D2 steel blades and the presence of a glass breaker. Both knives feature multiple cutting edges uncompromisingly designed to cut through ropes, harnesses and clothing of injured people.
This model, designed specifically for firefighters, features a universal spear point blade that can be opened with either the flipper or thumb pin system; there is also the multi-position clip in addition to the belt cutter that can be retracted inside the handle.
Intended Use: Emergency/Rescue
Production Type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Teflon coated
Handle: stainless steel and G10 folders
Blade length: 116mm.
Blade thickness: 3.2mm.
Total length: 271mm.
Weight: 254g.
Clip: removable and reversible, stainless steel
Closure: Liner Lock
Packaging: cardboard box with Donger logos, zippered nylon pouch
Notes: Rear tungsten carbide glass breaker - Rear removable belt cutter - Carson Flipper type opening system on ball bearingsBO-01DG004 -
Benchmade - Meatcrafter 4" - Dark Olive Santoprene Hybrid Hunting Knife - 15505 - knife
From field work to food preparation in the outdoor field kitchen, the 15505 Meatcrafter 4" derives from its full-size counterpart in terms of handle ergonomics and hybrid fixed blade profile, but offers a slightly smaller blade for even finer, more precise and detailed work.
The CPM-154 premium stainless steel blade with 14° SelectEdge is designed specifically for working with smaller animals such as game and poultry, with the perfect amount of blade for delicate cuts around the sternum.
With a Dark Olive Santoprene handle for a secure grip even in wet environments, the Meatcrafter 4" is a no-holds-barred cutting tool for the most experienced hunter.
Intended Use: Hunting / Meat KnifeType of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-154 58/61HRC
Blade finish: Stonewashed
Handle: Santoprene
Blade length: 102mm.
Blade thickness: 2.3mm.
Total length: 225mm.
Weight: 76.8g.
Sheath: Two-tone boltaron (one side black, one side orange)
Packaging: cardboard box with Benchmade logos
Notes: smaller and more compact version of the Meatcrafter modeloBM-15505 -
Maserin - Mini Gourmet by Attilio Morotti - Ebony - 381/EB - knife
Intended use: sports/steak
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel W1.4116
Blade treatment: satin finish
Handle: ebony
Blade length: 83mm.
Blade thickness: 2.5mm.
Closed length: 103mm.
Total length: 185mm.
Closed thickness: 17mm.
Weight: 88g.
Closure: Liner Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio MorottiMA-381/EB -
Peltonen Knives - M23 Ranger Cub Black - FJP305 - Puukko Knife
The M23 Ranger Cub knife features a 6.5-centimeter carbon steel blade with an induction-hardened edge at 62 HRC. Remember that carbon steel always requires some care, so keep the blade clean and wash and dry it after each use. You can also apply a little oil to the blade from time to time. With proper care, corrosion is kept at bay and the blade remains intact.
The handle material is TPV, thermoplastic vulcanized, a type of rubber-like plastic material that resists wear, impact, chemicals and temperature changes almost indefinitely. The secure grip remains firm even in wet conditions.
Thanks to the Kydex sheath, the knife can be easily carried on the belt in a horizontal position.
Intended Use: Hiking / Hunting / BushcraftProduction type: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 62HRC
Blade treatment: Dual Tone
Handle: TPV (vulcanized thermoplastic)
Blade length: 65mm.
Blade thickness: 3.3mm.
Total length: 165mm.
Weight: 78g.
Sheath: Kydex
Packaging: Cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka PeltonenPE-FJP305 -
Giant Mouse - ACE Sonoma V2 - Elmax & Green Canvas Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Very good condition, with a few small marks on blade and handle.
* Commercially available: Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small, unnoticeable scratches on the tip of the blade.
* Marks on handle: A small mark near the clip housing.
* Packaging: Yes
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory
Production Type: Industrial
Country of Production: China (by Reate Knives)
Blade: Elmax stainless steel
Blade finish: satin finish
Handle: green cavnas micarta with brass spacer
Blade length: 87mm.
Blade thickness: 3.5mm.
Length closed: 114mm
Total length: 203mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: cardboard box with Giant Mouse logos
Notes: discontinued knife, winner of the "2023 BEST EDC CHAMPION" award by CarryologyGM-ACESO-CP -
Kershaw - Bel Air - CPM-MagnaCut DuraLock KVT Knife - 6105 - pocket knife
Discover Made in USA quality and functionality with the Bel Air. When you open the knife, its smoothness is unmatched thanks to KVT ball bearings and DuraLock technology.
As for cutting, the steel of the MagnaCut blade maintains an exceptional edge, and the "reverse tanto" blade can handle the toughest challenges during daily carry. The BlackWash finish hides scratches from use and complements the aluminum handle grips. The slim profile makes it perfect for easy carrying, thanks in part to the reversible pocket clip.
Intended Use: SportyProduction type: Industrial
Country of manufacture: USA
Blade: CPM-MagnaCut 62/64HRC steel
Blade treatment: Blackwash
Handle: Aluminum 6061-T6
Blade length: 76mm.
Blade thickness: 2.3mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 11mm.
Weight: 82g.
Opening: via ambidextrous pins, placed on the blade
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, Teflon-coated stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opening on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)K6105 -
Boker Plus - M.E.R.K. 1 by Vaeringi Design - D2 & Black G10 - 01BO552 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Satin finish
Handle: stainless steel and G10 folders
Blade length: 93mm.
Blade thickness: 3.2mm.
Total length: 218mm.
Weight: 159g.
Clip: removable and reversible, stainless steel
Closure: Liner Lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: Design by Vaeringi - tungsten carbide backstop - ball bearing opening systemBO-01BO552 -
Boker Plus - Elso Folder by Kornel Kiss - D2 & Black G10 - 01BO554 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: stonewashed
Handle: stainless steel and G10
Blade length: 85mm.
Blade thickness: 2.7mm.
Total length: 205mm.
Weight: 127g.
Clip: Removable, stainless steel machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: Design by Kornel Kiss - ball bearing opening systemBO-01BO554 -
Boker - TRPPR Trapper - MagnaCut & Curly Birch - 112098 - Pocket Knife
Intended Use: Sporting/collection
Production type: Industrial
Country of Production: Germany
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and birch root
Blade length: 82mm.
Blade thickness: 2.4mm.
Total length: 189mm.
Weight: 70g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: ball bearing opening systemBO-112098 -
Boker - TRPPR Trapper - MagnaCut & Green Micarta - 112943 - Pocket Knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Germany
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and micarta
Blade length: 82mm.
Blade thickness: 2.4mm.
Total length: 189mm.
Weight: 70g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: ball bearing opening systemBO-112943 -
Victorinox - Evoke Alox - Terra Marrone - Limited Edition 2024 - 0.9415.L24 - knife
With an unmistakable and timeless design, Evoke Alox Limited Edition 2024 transcends trends. Subtle yet exceptional, it conveys strength and style. With its new Terra Marrone coloring, it allows you to reconnect with nature! With embossed and anodized aluminum cheeks, it's a really tough knife.
Intended Use: SportyType of production: Industrial
Country of manufacture: Switzerland
Blade: Stainless steel 1.4116
Blade finish: Satin finish
Handle: Aluminum
Blade length: 96mm.
Blade thickness: 2.8mm.
Length closed: 135mm.
Total length: 230mm.
Weight: 186g.
Locking system: back lock
Clip: stainless steel, removable
Packaging: cardboard box with Victorinox "Limited Edition" logos.
Notes: paracord lanyard - warranty certificate - limited edition for the year 2024V-0.9415.L24 -
Viper - Belone by Vox - Satin M390 & Blue Dark Matter Carbon Fiber - V5970TIFCB - knife
In designing the Belone, Danish Jesper Voxnaes started from typical lines of the Italian regional tradition, perfectly reworked according to his modern, minimalist style that has made him famous worldwide. The result is a light, tapered folding knife embellished with refined details, such as the holes in the back of the handle.
The Böhler M390 Microclean steel gives the Belone excellent cutting qualities, and the ball bearings make it the fastest flipper opening, perfectly integrated into the overall design. The carefully crafted ergonomically designed handle has an anodized titanium frame enclosed between thin carbon fiber folders. The Belone's clip is attached to the spacer so that the knife disappears completely into the pocket, maintaining maximum discretion.Intended Use: Sporting / EDC
Production type: Industrial
Country of manufacture: Italy
Blade: Stainless steel M390 60-61HRC
Blade Treatment: Satin finish
Handle: Stonewashed titanium and forged carbon fiber "Dark Matter" in blue color
Blade length: 85mm.
Blade thickness: 3.4mm.
Length closed: 114mm.
Total length: 200mm.
Thickness when closed:11.3mm.
Weight: 78g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV5970TIFCB -
William Henry - Signature Collection B12-FTD - Damascus ZDP-189 and Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: some minor scuffs and hairlines on the right side
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Collection
Production type: MidTech
Country of manufacture: USA
Blade: stainless rolled damascus with wave design, 45-ply and ZDP-189 cutting edge
Blade finish: -
Handle: titanium with blue anodized and topaz set
Blade length: 79mm.
Blade thickness: 2.3mm.
Length closed: 100mm.
Total length: 180mm.
Weight: 57g.
Closure: Button Lock with embedded topaz
Sheath: leather, with stainless steel clip
Packaging: cardboard box with William Henry logos and warranty certificate
Notes: previously purchased knife, from a private collectionWH-BF12-CP -
Benchmade - 535SL-07 Mini Bugout - Crushed Silver Cerakote & Sage Green - knife
What began as an attempt to perfect the multi-purpose outdoor lock, has evolved into a practical solution for everyday tasks and chores: the 533SL-07 Mini Bugout is exactly the compact EDC built for everyday carry in style.
Lightweight, slim and sleek, yet incredibly rugged and durable for its size, the 533SL-07 Mini Bugout is a seasonal variant that immediately catches the eye, with an easy-care premium CPM-S30V steel blade, Cerakote Crushed Silver finish and Sage Green outdoor-inspired Grivory-colored grip, with gold-anodized backspacer and thumb stud for a distinctive Benchmade color touch.
Intended Use: Sporty / EDCProduction Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC stainless steel
Blade finish: Crushed Silver Cerakote
Handle: Grivory
Blade length: 72mm.
Blade thickness: 2.3mm.
Length closed: 94mm.
Total length: 164mm.
Thickness when closed: 10.5mm
Weight: 42.5g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-533SL-07 -
Benchmade - Bugout 535-12 - Tan Grivory - Axis Lock Knife - knife
In the years since the 535 Bugout was launched, this slim, lightweight and durable folder has redefined EDC style and versatility, from the trail to the workplace and amidst all of life's adventures.
The 535-12 Bugout is an instant eye-catcher, made of easy-care premium CPM-S30V stainless steel with a stonewashed finish and powder-colored Grivory handle with backspacer and gold anodized thumb stud for a touch of color and class-the must-have tool in your outdoor kit.
Intended Use: Sporting / EDC
Production type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC stainless steel
Blade finish: Stonewashed
Handle: Grivory
Blade length: 82mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 189mm.
Thickness when closed: 10.5mm
Weight: 52g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-535-12 -
Gerber - Sumo Black - Pivot Lock Layered G10 - 30-001814 - knife
Take it seriously: the Sumo is no joke! This oversized knife is the ultimate in practicality: it's easy to use, opens smoothly and offers an ambidextrous locking system that's easily operated with a simple, reliable pivot, and it's also particularly aesthetically appealing and packed with colorful details and accents.
The red ceramic-treated inner folders give an attention-grabbing pop, while the layered G10 offers great grip and plenty of hand room!
Intended Use: Sporty
Production type: Industrial
Country of manufacture: China
Blade: 7Cr17Mov stainless steel
Blade treatment: Darkwashed
Handle: made of layered G10, with liners and spacers made of red ceramic-treated steel
Blade length: 98mm.
Blade thickness: 3.3mm.
Length closed: 130mm.
Total length: 225mm.
Weight: 145g.
Closure: Pivot Lock (Axis Lock)
Clip: removable and reversible in painted stainless steel
Packaging: cardboard box with Gerber logos
Notes: -G30-001814 -
Livio Montagna - 2014 Hunting Knife - RWL34 & Sambar Amber - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratoryIntended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.AP-MONT-CPSA -
Benchmade - Meatcrafter - Dark Olive Santoprene - 15500-04 - knife
When your field adventures transition to the kitchen, the right cutting tool can make all the difference!
The new 15500 Meatcrafter™️ is a fixed hybrid hunting knife with a blade design ideal for cutting, boning or slicing your favorite cuts of meat. Featuring Benchmade's new SelectEdge™ technology, the 28° sharpening angle of the CPM-154 stainless steel blade provides the perfect balance of penetration, strength, edge retention and blade flexibility. Ideal to take with you on your hunting trips, but also a reliable companion in the kitchen or during the most demanding barbecues!
Intended Use: Hunting / Meat Knife
Type of production: Industrial
Country of manufacture: USA
Blade: CPM-154 58/61HRC stainless steel
Blade finish: Stonewashed
Handle: Santoprene
Blade length: 154mm.
Blade thickness: 2.3mm.
Total length: 281mm.
Weight: 91.8g.
Sheath: Boltaron
Packaging: Cardboard box with Benchmade logos
Notes: -BM-15500-04 -
Frank Centofante - SL-10 - ATS34 & Micarta #049 - PRIVATE COLLECTION - handmade knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 12/1990 model, overall in good condition, with a few small marks from time
* Commercially available: Limited edition, numbered model, made entirely by hand; craftsman passed away in 2009
* Sharpening: Re-sharpened, a few small marks on blade due to sharpening
* Marks on blade: A few small marks
* Marks on handle: A few hairlines on the bolsters and a small dent on the left micarta handle.
* Box: -
* Scabbard: Suede leather case.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: USA
Blade: stainless steel ATS34
Blade finish: satin finish
Handle: Stainless steel and Micarta
Blade length: 83mm
Blade thickness: 2.5mm.
Length closed: 108mm.
Total length: 189mm.
Thickness when closed: 8mm.
Weight: 99g.
Closure: Back Lock
Clip: -
Sheath: Suede leather pouch
Packaging: -
Notes: rare handcrafted knife made in December 1990 by noted U.S. knife maker Frank Centofante who passed away in 2009, serial number #049FC-SL10-CP -
Zero Tolerance - KVT Folder Knife - MagnaCut & Carbon Fiber - ZT0545 - Knife
The slim profile and carbon fiber handle provide comfortable and lightweight carry for the Zero Tolerance 0545. Moreover, the 0545 model is appropriately sized for serious cutting tasks. The CPM MagnaCut steel blade is balanced and highly performant.
Aesthetically, this ZT Original boasts a clean design without visible screws for the pocket clip.
Produced in the United States, the premium CPM MagnaCut steel of the blade, achieved through powdered metallurgy, excels in edge retention, corrosion resistance, wear resistance, and toughness; the stonewashed finish helps conceal signs of use.
The blade opens easily and effortlessly thanks to the KVT system with ball bearings, washers, and flipper.
Intended use: EDC/Sport/Collection
Production type: Industrial
Blade production: USA
Blade: CPM Magnacut Steel 60-63 HRC
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 81mm
Blade thickness: 2.3mm
Closed length: 109mm
Overall length: 190mm
Weight: 57g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: KVT opening on ball bearingsZT0545 -
Boker - Mini Bronco 80CrV2 Bushcraft Knife - 121505 - knife
Intended Use: Utility
Production type: Industrial
Country of Production: Germany - Solingen
Blade: ful tang 80CrV2 steel
Blade finish: Stone Washed
Handle: TPE
Blade length: 89mm.
Blade thickness: 3.5mm.
Total length: 210mm.
Weight: 137g.
Sheath: kydex
Packaging: cardboard box with Boker Germany logos
Notes: -BO-121505 -
Boker Plus - Kihon DC GFN Knife - 01BO800 - Lucas Burnley - Folding Knife
The American custom knife maker Lucas Burnley embodies the concept of Japanese Kihon with the design of the Boker Plus Kihon DC. The term originally encompasses the fundamental principles and basic techniques of Japanese martial arts, which Burnley translates into practicality in the solid everyday pocket knife.
The features and linear design are evidence of a high level of practicality, providing the knife with a decisive price-performance advantage and an ideal basis for daily cutting tasks. The satin-finished drop-point blade made of D2 opens smoothly via the removable thumb stud thanks to the ball bearing, while the slide lock of the crossbar ensures intuitive, safe, and practical unlocking of the knife.
The non-slip handle with textured squares is made of high-strength GFN and fits comfortably in the hand. Orange anodized rings around the blade axle screw and the large handle screw give the Kihon a refined touch. Supplied with a lanyard hole and a convertible tip-up wire clip for flexible carrying options.
Intended use: EDC / Sporting
Production type: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: Satin finish
Handle: GFN
Blade length: 82mm.
Blade thickness: 3.2mm.
Overall length: 200mm.
Weight: 105g.
Clip: Steel, removable and reversible
Locking mechanism: Axis lock
Packaging: Cardboard box with Boker Plus logos
Notes:BO-01BO800 -
Lionsteel - T.R.E. Three Rapid Exchange - Carbon Fiber - PRIVATE COLLECTION - M390 - Knife
Type: Previously purchased and used
Condition: In excellent condition
Availability: Available for purchase
Sharpening: Resharpened
Blade marks: NO
Handle marks: small marks on the clip
Box: Original and present, made of cardboard
Sheath: Not included
Manuals, Certificates, and Warranties: Included
Inspected and Certified by our internal laboratory
Usage: Sports/CollectionType of production: Industrial
Country of production: Italy
Blade: Bohler M390 steel 60/61HRC
Blade finish: Bead blasted and matt
Handle: Carbon Fiber and Titanium
Blade length: 74mm
Blade thickness: 3.5mm
Total length: 175mm
Weight: 62g
Lock: Titanium Frame Lock with steel stopper
Clip: 6Al4V Titanium
Packaging: Cardboard box with LionSteel logos
Notes: IKBS ball-bearing opening with Carson flipper systemAP-TRE-FC -
Maserin - Daga by Attilio Morotti - Elmax & Blue Fat Carbon - 372/B - knife
Intended use: collectible / sporting
Type of production: Industrial
Country of Production: Italy
Blade: Elmax steel at 61HRC
Blade finish: satin-finished
Handle: Made of anodized titanium and Fat Carbon with blue highlights
Blade length: 80mm.
Blade thickness: 3.4mm.
Total length: 175mm.
Weight: 92g.
Closure: Frame Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio MorottiMA-372/B -
Maserin - Daga by Attilio Morotti - Rose Damascus & Gold Fat Carbon - 372/DG - knife
Intended use: collectible / sporting
Type of production: Industrial
Country of Production: Italy
Blade: Stainless damascus steel "Rose"
Blade treatment:
Handle: In titanium and Fat Carbon with gold highlights
Blade length: 80mm.
Blade thickness: 3.4mm.
Total length: 175mm.
Weight: 92g.
Closure: Frame Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio MorottiMA-372/DG -
Maserin - Gourmet by Attilio Morotti - Rose Damascus & Green Fat Carbon - 380/DV - knife
Intended use: sporting/for table use
Type of production: Industrial
Country of Production: Italy
Blade: Stainless damascus steel "Rose"
Blade finish: -
Handle: fat carbon with green highlights
Blade length: 97mm.
Blade thickness: 2.5mm.
Length closed: 118mm.
Total length: 217mm.
Thickness when closed: 17mm.
Weight: 88g.
Closure: Liner Lock
Clip: -
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio "Atti" MorottiMA-380/DV -
Boker Plus - Knife Kit by Raphael Durand - Advent Calendar 2023 - 01BO902 - knife
Christmas is the time of year when traditions and special moments are celebrated with enthusiasm. One of these traditions is the advent calendar, and Boker has decided to revisit it in a unique way.
The complete kit for a high-quality pocket knife
Inside, you will find everything you need to assemble a high-quality pocket knife, ready to be assembled. Every day a piece of the knife, which will allow you, in the end, to build your custom knife. The kit includes elements such as the blade, various handles for customizing the handle, precision screws, useful accessories, and some surprises that will make every day a unique emotion.
Intended use: EDC/Gentleman
Type of production: Industrial
Country of production: East
Blade: in D2 steel
Blade treatment: satin
Handle: micarta and carbon fiber
Blade length: 80mm.
Blade thickness: 3.0mm.
Total length: 185mm.
Weight: 71g.
Closure: back lock
Packaging: Cardboard box with Boker logos
Notes: Design by Raphaël DurandBO-01BO902 -
MKM - Campo 7 - MagnaCut & Natural Micarta - CP07MAG-NC - Multipurpose Knife
A story of evolution:
One day a handful of guys were thinking about how to improve their multipurpose knife, a classic knife made and thought of over a century ago, but without having to integrate or think of additional functions since all possible tools had already been invented or proposed.
So one of these guys said, "Why don't we simply improve the steel of the blade to provide better cutting and holding capabilities and not toughen the structure while still leaving it compact and familiar?" There Campo was born, with fabulous MagnaCut steel on the main blade!
Features:
* Blade
* Bottle opener
* Flat screwdriver
* Box opener
* Fork
* Scissors
* Phillips screwdriver
* Corkscrew
Intended Use: Hiking / Multipurpose
Production Type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut 61/63 HRC steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 67mm.
Blade thickness: 2.5mm.
Total length: 100mm.
Weight: 107g.
Closure: SlipJoint
Clip: -
Sheath: -
Packaging: Cardboard box with MKM logos
Notes: -MK-CP07MAG-NC -
MKM - Malga 6 - MagnaCut & Black Micarta - MP06MAG-BC - Multipurpose Knife
A story of evolution:
One day a handful of guys were thinking about how to improve their multipurpose knife, a classic knife made and thought of over a century ago, but without having to integrate or think of additional functions since all possible tools had already been invented or proposed.
So one of these guys said, "Why don't we simply improve the steel of the blade to provide better cutting and holding capabilities and not toughen the structure while still leaving it compact and familiar?" There Malga was born, with fabulous MagnaCut steel on the main blade!
Features:
* Blade
* Bottle opener
* Flat screwdriver
* Box opener
* Fork
* Reamer
* Corkscrew
Intended Use: Hiking / Multipurpose
Production type: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut 61/63 HRC steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 67mm.
Blade thickness: 2.5mm.
Total length: 100mm.
Weight: 79g.
Locking system: SlipJoint
Clip: -
Sheath: -
Packaging: Cardboard box with MKM logos
Notes: -MK-MP06MAG-BC -
MKM - Vincent by Vox - Top Shield N690Co & Black G10 - VCN-GBB - knife
The blade shapes of this new folding knife designed by Jesper Voxnaes are reminiscent of ancient times when pirates sailed the seas with their precious swords at their side, maestone and ready to accomplish any task! The blade is BOHLER N690Co with black Black Top Shield cover and G10 handle for the best possible grip.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: Black Top Shield
Handle: G10, with embedded stainless steel liners and anodized aluminum spacer
Blade length: 62mm.
Blade thickness: 3.2mm.
Length closed: 106mm.
Total length: 175mm.
Thickness when closed: 13mm.
Weight: 100g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VOX VoxnaesMK-VCN-GBB -
MKM - Flame Light by Zieba - M390 & Green Micarta - FL02L-GC - knife
FLAME LIGHT, practical folding knife and now even lighter!
BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02L-GC -
Viper - Keeper 2 by Fabrizio Silvestrelli - Elmax & Damascus Carbon Fiber - V6000FCDL - knife
Intended Use: Tactical/Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel Elmax SuperClean 59/61HRC
Blade Finish: Satin finish
Handle: carbon fiber and stainless steel damascus effect handle, 1.4116 stainless steel liners and GR2 titanium spacer
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 210mm.
Weight: 145g.
Closure: liner lock with integrated Smart Automatic Safe Lock System.
Clip: stainless steel 1.4116, removable and reversible
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio "Silvester" SilvestrelliV6000FCLD -
Spyderco - Paramilitary Knife - G10 Black - Serrated - C81GS - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased and Used
Conditions: In excellent conditions
Available in the market: Out of production since 2010
Sharpening: Factory
Marks on blade: NO
Marks on handle: NO
Box: Present
Sheath: -
Manuals, Certificates, and Warranties: No
Checked and Certified by our internal laboratory
Intended use: Sport / CollectionType of production: Industrial
Blade Production: USA
Blade: In CPM-S30V stainless steel
Blade finish: Satin
Handle: G10
Blade Length: 87mm.
Blade Thickness: 3.5mm.
Closed Length: 122mm.
Total Length: 210mm.
Weight: 110g.
Closure: Compression Lock
Clip: Painted stainless steel
Packaging: Cardboard box with Spyderco logos
Notes:AP-C81GS -
ExtremaRatio - Police I knife - Multi-purpose 2 blades - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available NO
* Sharpness: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: YES
* Checked and Certified by our internal laboratoryType of production: Industrial
Country of production: Italy
Blade: in N690Co stainless steel
Finish: Testudo burnishing
Handle: Anodized aeronautical aluminum anticorodal
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 210mm.
Weight: 152g.
Sheath: -
Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificates
Notes: emergency blade with snap opening (length. 8 cm) - glass breaker - model from 2013 now out of productionER-AP-POLICE -
Lionsteel - WILLY knife - Micarta Green - WL1CVG - knife
A pocket-sized and compact EDC knife featuring an M390 steel blade with a satin finish and a SOLID® (one-piece) handle with titanium ferrule.
The SOLID® handle is available in several variants, and its ergonomic shape fits the palm of the hand perfectly, allowing for very precise handling.
Type of use: hiking / hunting / light utility
Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: Full tang, stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Green Micarta and Titanium
Blade length: 65mm.
Blade thickness: 3.8mm.
Total length: 150mm.
Balance: central
Weight: 57g. (99g. scabbard included)
Sheath: leather, belt, with vertical port
Packaging: cardboard box with Lion Steel logos
Notes: design by the well-known knife-maker Gianluigi "Wilson" Simonella, a lifelong maker of custom knives, as well as a craftsman of material and a founding member of the Corporazione Italiana Coltellinai (CIC)LS-WL1CVG -
Boker Plus - Kwaiken Sym by Lucas Burnley - 01BO635 - knife
In the Kwaiken Sym, Oregon knife designer Lucas Burnley brings the idea of symmetry and harmony in line with Japanese philosophy. The flipper resembles a parry element and allows for safe and intuitive use. The linerlock, which locks the sharp spearpoint blade on one side, is made of 154CM coated in black.
The exclusive claim is underscored by the noble titanium bolster handle and G10 handle grips, which harmoniously give the all-black knife a very distinctive look. The slim design and exclusive material make the Kwaiken a noble cross between a sports knife and a tactical knife. It comes with a high-quality nylon case for storage.
Intended Use: Tactical/Sporting
Production Type: Industrial
Country of manufacture: Taiwan
Blade: stainless steel 154CM
Blade treatment: black coating
Handle: titanium and G10
Blade length: 91mm.
Blade thickness: 2.9mm.
Total length: 215mm.
Weight: 123g.
Clip: removable, stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: design by Lucas Burnley - flipper opening system on ball bearingsBO-01BO635 -
Benchmade - Bailout Knife - CPM-M4 - Tanto - Titanium Handle - Limited Edition - 537BK-2302 - knife
A perfect combination in the EDC paradise. The Bailout® holds a special place in the hearts of those who appreciate tactical toughness in their everyday carry, and now we're pairing this sleek and ultralight folding knife with the ultimate super-material: titanium.
The all-new limited edition 537BK-2302 Bailout® features the much-loved CPM-M4 tanto blade, now in cobalt black Cerakote, but the star of this show is its handle made of bead-blasted 6Al-4V titanium manufactured in the USA.
Accentuated with PVD-coated blue hardware, including a Crater Blue lanyard pommel, this edition is limited to 1000 pieces.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Origin: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cobalt Black Cerakote
Handle: 6AI-4V Titanium
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 9.7mm
Weight: 103g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited edition of 1000 piecesBM-537BK-2302 -
Ka-Bar - TDI Pocket Strike - Karambit Knife - 2491 - knife
Intended use: Tactical / EDC
Production type: Industrial
Country of manufacture: Taiwan
Blade: Full tang in AUS-8 57/59HRC stainless steel
Blade finish: Powder coated
Handle: Zytel
Blade length: 80mm.
Blade thickness: 3.7mm.
Total length: 197mm.
Weight: 117g. (172g. with sheath)
Sheath: ABS with clip
Notes: -KB-2491 -
Benchmade - Mini Barrage 585 Axis Assist Knife Black G-10 - knife
Intended use: Tactical / sport
Type of production: Industrial
Production Lama USA with assisted opening
Blade: steel 154CM 58 / 61HRC
Blade treatment: -
Handle: Black Valox polymer
Blade length: 73mm.
Blade thickness: 2.5 mm.
Closed Length: 101mm.
Overall length: 175mm.
Thick when closed: -
Balancing: -
Weight: 96g.
Closing: AXIS Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with Benchmade logos
Notes: design by OsborneBM-585-03 -
Benchmade - 317BK-02 - Weekender - S90V Double Red Micarta - utility knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: USA
Blade: CPM-S90V 59/61HRC steel
Blade Finish: Black Battlewash
Handle: Canvas Micarta
Blade Length: 71mm. / 50mm.
Blade thickness: 2.3mm.
Length closed: 97.8mm.
Overall length: 179mm. / 169mm.
Thickness when closed: 10mm.
Weight: 65g.
Closure: Slipjoint
Clip: -
Packaging: Cardboard box with Benchmade logos
Notes: Double blade and bottle opener/cap lifter toolBM-317BK-02 -
Benchmade - Mini Adamas - MagnaCut & Marble Carbon Fiber - 273-03 - knife
Intended Use: Utility / Hiking
Type of production: Industrial
Country of manufacture: USA
Blade: CPM-MagnaCut 63/65HRC tool steel
Blade finish: Satin finish
Handle: Marble Carbon Fiber with FDE stainless steel folders
Blade Length: 82.6mm.
Blade thickness: 3.6mm.
Length closed: 111mm.
Total length: 193mm.
Handle thickness: 16mm.
Weight: 130g.
Closure: AxisLock
Clip: Deep Pocket, removable and reversible, stainless steel with FDE finish
Packaging: cardboard box with Benchmade logos, microfiber pouch with Benchmade logos
Notes: high-carbon steel blade, not stainless; wash and dry carefully after use and grease in case of storageBM-273-03 -
Boker Plus - S-Rail by Darriel Caston - 01BO556 - folding knife
The innovative Boker Plus S-Rail is a lightweight knife equipped with a one-sided ground D2 blade that is slid frontally and manually from the handle. As with all-purpose knives, the lock is unlocked by pressing a button, and the satin-finished blade manually moves forward or backward. A halfway stop further enhances work safety.
The CNC-machined black G10 handle cheekpiece fits comfortably in the hand despite the pocket knife's small size. Equipped with a lanyard hole, a deep carry clip (tip down) that doubles as a money clip, and a high-quality nylon pouch for storage.
Intended Use: EDC / Sporting
Production type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Satin finish
Handle: G10
Blade length: 51mm.
Blade thickness: 2.5mm.
Total length: 126mm.
Weight: 26g.
Clip: removable, deep pocket, stainless steel
Closure: Slide Lock (modified Button Lock)
Packaging: cardboard box with Boker Plus logos
Notes: design by Darriel CastonBO-01BO556 -
Benchmade - Mini Freek - Cerakote CPM-M4 & Black/Gray G10 - 565BK-02 - knife
This one is for the fans! For years Benchmade has received countless requests to make a "Super Freek" mini, and it has listened to you loud and clear. The Mini Freek 565BK-02 takes everything you love about its full-size counterpart and reduces it to a more pocketable form, including the black CPM-M4 blade and instantly recognizable tricolor G10 handle. With unmistakable style and uncompromising strength, this Mini Freek is truly super.
Intended use: sporty
Type of production: industrial
Country of manufacture: USA
Blade: CPM-M4 62/64HRC stainless steel
Blade treatment: Cerakote
Handle: G10 with anodized aluminum spacers
Blade length: 76.2mm.
Blade thickness: 2.6mm.
Length closed: 102mm.
Total length: 179mm.
Weight: 82g.
Closure: AxisLock
Clip: Stainless steel, removable and reversible
Packaging: cardboard box with Benchmade logos
Notes: -BM-565BK-02 -
Boker Plus - Gemtek Knife - D2 - G10 - by A. De Santis - 01BO553 - knife
Rigorous efficiency or flexible dynamics? - A question that doesn't even arise for Alessandra de Santis's Boker Plus Gemtek. It can do both, not to mention the nuances in between. The designer from Hydra Design is known for her spirited creations with maximum functionality.
The Gemtek confidently joins this series and presents itself as a folding knife with a Frame Lock mechanism, featuring a Modified-Droppoint blade in high-performance D2 steel, which opens with a Flipper and impresses with its stonewash finish and a decorative false edge.
The handle front is made of gray G10, equipped with a discreet triangular texture for optimal grip. Carefully balanced elements such as the red spacers with an integrated loop and a G10 triangle on the back, reflecting the structure of the handle's front, elegantly complete the pocket knife's appearance.
The Tip-Up (r) clip allows for deep carry, ensuring the knife almost entirely disappears in the pants pocket. It comes with a high-quality nylon case for storage.
Intended use: Tactical
Type of production: Industrial
Country of production: Taiwan
Blade: in D2 steel
Blade finish: Stonewashed
Handle: G10
Blade length: 72mm.
Blade thickness: 3.7mm.
Total length: 176mm.
Weight: 132g.
Clip: removable stainless steel
Locking mechanism: Frame Lock
Packaging: nylon zippered case - cardboard box with Boker Plus logos
Notes: opening with Carson Flipper system on ball bearings - design by Alessandra De SantisBO-01BO553 -
Benchmade - Flyway - Small Game Hunter Knife - CPM-S90V & OD Green G10 - 15700-01 - knife
The Flyway has proven to be the ultimate fixed blade for offshore game and waterfowl. The 15700-01 offers the ultimate in edge retention thanks to CPM-S90V steel, which will keep you in the field well into the season. To change things up even further, the ergonomic handle now includes OD green G10 gauntlets with orange rings for visibility, while the orange Boltaron sheath is perfect for attaching to a chest rig or stuffing into a backpack.
Intended Use: Hunting/Light Utility
Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S90V stainless steel (59/61HRC)
Blade finish: Satin finish
Handle: G10
Blade length: 68mm.
Blade thickness: 2.3mm.
Total length: 177mm.
Weight: 58.5g.
Sheath: Boltaron
Packaging: Cardboard box with Benchmade logos
Notes: -BM-15700-01 -
Benchmade - Altitude knife - Orange CPM-S90V & Carbon Fiber - 15201OR - knife
Built on a solid foundation, the revamped 15201OR Altitude takes ultralight hunting gear to new levels. Incorporating feedback from our fans, this minimalist fixed blade features full-length carbon fiber sheaths for better blade control in CPM-S90V. This less than 50-gram machining tool earns its place at your side with a balance of corrosion resistance, strength, and edge retention.
Intended Use: Hunting
Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-S90V (59/61HRC)
Blade treatment: Cerakote
Handle: stainless steel CPM-S90V with carbon fiber grips
Blade length: 78mm.
Blade thickness: 2.3mm.
Total length: 175mm.
Weight: 47g.
Sheath: made of Boltaron, for neck or compatible with M.O.L.L.E. type attachments.
Packaging: cardboard box with Benchmade logos
Notes: -BM-15201OR -
Benchmade - Raghorn knife - CPM-S30V - OD Green G10 - 15600-01 - knife
For the big game hunter who tracks their prey through the woods, every gram counts. Try the brand new 15600-01, an ultra-lightweight fixed blade knife designed to process large animals.
Building on the ergonomics of the 15600 model, the 15600-01 features an OD Green G10 handle that fits well in the hand and a reliable CPM-S30V stainless steel.
Intended use: Hunting / Light Utility
Type of production: Industrial
Country of production: USA
Blade: in CPM-S30V stainless steel (58-60)
Blade finish: Satin
Handle: G10 Green
Blade length: 116mm.
Blade thickness: 2.3mm.
Total length: 2.28mm.
Weight: 45g.
Sheath: kydex
Packaging: Cardboard box with Benchmade logos
Notes: -BM-15600-01 -
Benchmade - Hunt Taggedout knife 15536 - S45VN - OD Green - Axis Lock Knife - knife
The Taggedout, a knife inspired by the Bugout line, is lightweight and perfect for long distance hunters or outdoor enthusiasts.
By popular demand, the Taggedout 15536 modifies the 15535 model, making it ideal as a multifunctional outdoor EDC. The thumb hole is replaced with an orange anodised stud, and a lanyard spacer in the same colour is added. This new version of the Taggedout also changes the handle of the 15535 model, previously in Grivory, to one in OD green G10. The blade steel has been upgraded to CPM-S45VN, which provides greater edge retention and corrosion resistance.
This revamped Taggedout is ready to meet all your adventure needs.
Intended use: Sporty / EDC
Production type: Industrial
Country of Production: USA
Blade: CPM-S45VN (60-62 HRC)
Blade finish: Satin finish
Handle: OD Green G10
Blade length: 89mm.
Blade thickness: 2.3mm.
Length closed: 116mm.
Total length: 206mm.
Thickness when closed: 12.5mm
Weight: 59.5g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-15536 -
Boker - 1969 Camaro Z28 Damast by Tommaso Rumici - 111101DAM - knife
Designed by Tommaso Rumici, the knife is "muscular" and unique, combining the Camaro Z28's distinctive features of shape and strength. The elegant Damascus blade, hand forged by Chad Nichols with 80 layers in the "Tread" pattern, is reminiscent of the muscle car's sloping hood. To that end, parts from the upper suspension arm of the original vintage Camaros were used to forge the blade.
Based on an analysis of the color of an original model, the "Le Mans Blue" lacquer finish was created especially for Boker for the aluminum handle, which interprets the body lines in a nostalgic way and is enriched with exciting details. The notchback, small rear spoiler and slat-shaped air intakes on the rear fenders have been beautifully integrated into the knife. The blade axle screw is lovingly inspired by the rims often used on muscle cars, while the straight-line stainless steel clip, milled from billet, is reminiscent of chrome door handles.
Intended Use: Sporting / Collection
Type of production: Industrial
Country of manufacture: Germany - Solingen
Blade: Handcrafted Damascus "Tred" by Chad Nichols made from the suspension of old Camaros
Handle: Aluminum painted "Le Mans Blue" metallic color
Blade length: 80mm.
Blade thickness: 3.6mm.
Total length: 186mm.
Weight: 99g.
Closure: Liner Lock
Clip: stainless steel
Packaging: Display case with Boker logos, fabric knife case, warranty certificates
Notes: Limited edition numbered on the back of the knifeBO-111101DAM -
BlackFox - Artia by Grigorii Matveev - D2 Green G-10 - BF-765OD - knife
Intended Use: EDC / Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2 at 59/61HRC
Blade treatment: Stonewashed
Handle: G-10
Blade length: 93mm.
Blade thickness: 3.4mm.
Total length: 203mm.
Weight: 100g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-765OD -
BlackFox - Acutus by Grigorii Matveev - D2 Black G-10 - BF-764BB - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: D2 tool steel at 59/61HRC
Blade treatment: Black PTFE
Handle: G-10
Blade length: 90mm.
Blade thickness: 3.4mm.
Total length: 195mm.
Weight: 115g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-764BB -
BlackFox - Nix by Grigorii Matveev - D2 Orange G-10 - BF-763OR - couteau
Usage prévu : EDC / Sport
Type de production : Industriel
Pays de production : Chine
Lame : Acier à outils D2 à 59/61HRC
Traitement de la lame : PTFE noir
Manche : G-10
Longueur de la lame : 55mm.
Epaisseur de la lame : 3.5mm.
Longueur totale : 132mm.
Poids : 90g.
Clip : Acier inoxydable, amovible et réversible
Fermeture : Liner Lock
Emballage : boîte en carton avec les logos BlackFox
Notes : Design par Grigorii MatveevBF-763OR -
BlackFox - Nix by Grigorii Matveev - D2 Brown Micarta - BF-763 - knife
Intended Use: EDC / Sporty
Type of production: Industrial
Country of Production: China
Blade: D2 tool steel at 59/61HRC
Blade treatment: Stonewashed
Handle: Micarta
Blade Length: 55mm.
Blade thickness: 3.5mm.
Total length: 132mm.
Weight: 90g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-763 -
Benchmade - Mini Bugout - Sea Foam 533GY-06 Axis Lock - knife
Intended Use: Sporting / EDC
Production type: Industrial
Country of Production: USA
Blade: CPM-S30V 58/60HRC
Blade finish: Tungsten Gray Cerakote
Handle: Grivory
Blade Length: 72mm.
Blade thickness: 2.3mm.
Length closed: 94mm.
Total length: 164mm.
Thickness when closed: 10.5mm
Weight: 42.5g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-533GY-06 -
Benchmade - Mini Bugout - Alpine Glow 533BK-05 Axis Lock - knife
Intended Use: Sporting / EDC
Production type: Industrial
Country of Production: USA
Blade: CPM-S30V 58/60HRC
Blade finish: Cobalt Black Cerakote
Handle: Grivory
Blade Length: 72mm.
Blade thickness: 2.3mm.
Length closed: 94mm.
Total length: 164mm.
Thickness when closed: 10.5mm
Weight: 42.5g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-533BK-05 -
Benchmade - Mini Bugout - Mesa Red 533-04 Axis Lock - knife
Intended Use: Sporting / EDC
Production type: Industrial
Country of Production: USA
Blade: CPM-S30V 58/60HRC
Blade Finish: Satin finish
Handle: Grivory
Blade length: 72mm.
Blade thickness: 2.3mm.
Length closed: 94mm.
Total length: 164mm.
Thickness when closed: 10.5mm
Weight: 42.5g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-533-04 -
Pohl Force - Bravo Two Classic - FDE Dark Stonewashed ATS-34 - 1079 - knife
To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.
From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.
It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.
The Bravo Two Classic BK is equipped with an FDE (Flat Dark Earth) fibreglass handle and a Tanto blade with a Dark Stonewashed finish.
Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dark Stonewashed
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacturePF-1079FDE -
Pohl Force - Bravo One Classic - FDE Dark Stonewashed ATS-34 - 1077 - knife
To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.
From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.
It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.
The Bravo One Classic BK features an FDE (Flat Dark Earth) fibreglass handle and a Drop point blade with a Dark Stonewashed finish.
Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dark Stonewashed
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacturePF-1077FDE -
Benchmade - Full Immunity - Woodland Green - 290BK-2 - knife
When blade length is limited, the need is not. Designed for easy carry and compactness, the Full Immunity™ features a less than 2.5-inch CPM-M4 blade with a Cobalt Black Cerakote® finish that boasts exceptional edge retention and strength in a Wharncliffe profile that tapers to an ultra-fine point. The included lanyard speeds retrieval from the pocket for manual use in emergency situations. Finished with anodized aluminum handles, the Full Immunity™ is a concentration of utility in a compact configuration.
Intended Use: Tactical
Type of production: Industrial
Country of manufacture: USA
Blade: CPM-M4 62/64 HRC carbon steel
Blade finish: cobalt black cerakote
Handle: Aluminum
Blade length: 63mm.
Blade thickness: 2.3mm.
Length closed: 87mm.
Total length: 150mm.
Thickness when closed: 12.7mm.
Weight: 65g.
Closure: AXIS Lock
Clip: Tip Up, stainless steel, removable and reversible, mini deep carry type
Packaging: Cardboard box with Benchmade logos
Notes: -BM-290BK-2 -
Benchmade - Full Immunity - Flat Dark Earth - 290BK-1 - knife
When blade length is limited, the need is not. Designed for easy carry and compactness, the Full Immunity™ features a less than 2.5-inch CPM-M4 blade with a Cobalt Black Cerakote® finish that boasts exceptional edge retention and strength in a Wharncliffe profile that tapers to an ultra-fine point. The included lanyard speeds retrieval from the pocket for manual use in emergency situations. Finished with anodized aluminum handles, the Full Immunity™ is a concentration of utility in a compact configuration.
Intended Use: Tactical
Type of production: Industrial
Country of manufacture: USA
Blade: CPM-M4 62/64 HRC carbon steel
Blade finish: cobalt black cerakote
Handle: aluminum
Blade length: 63mm.
Blade thickness: 2.3mm.
Length closed: 87mm.
Total length: 150mm.
Thickness when closed: 12.7mm.
Weight: 65g.
Closure: AXIS Lock
Clip: Tip Up, stainless steel, removable and reversible, mini deep carry type
Packaging: Cardboard box with Benchmade logos
Notes: -BM-290BK-1 -
Benchmade - Full Immunity - Crater Blue - 290BK - knife
Intended Use: Tactical
Type of production: Industrial
Country of Production: USA
Blade: carbon steel CPM-M4 62/64 HRC
Blade finish: cobalt black
Handle: aluminum
Blade length: 63mm.
Blade thickness: 2.3mm.
Length closed: 87mm.
Total length: 150mm.
Thickness when closed: 12.7mm.
Weight: 65g.
Closure: AXIS Lock
Clip: Tip Up, stainless steel, removable and reversible, mini deep carry type
Packaging: Cardboard box with Benchmade logos
Notes: -BM-290BK -
Victorinox - Evoke Alox knife - Red - 0.9415.D20 - knife
Simplicity, style and durability without compromise: discover Evoke Alox. A five-function folding knife that blends bold aesthetics with innovative features to use the blade like true masters. The silver-tone lockable drop-point blade offers stability to the knife, while a removable thumb stud ensures ease of opening. Put it among the things you carry with you every day.
The perfect folding knife for everyday adventures, with removable thumb stud
Swiss made knife with 4 functions
With detachable carrying clip and tough, stylish Alox scalesIntended use: Sport
Instruments
Llama, great
Thumb pin, removable
Carrying clip
Cord hole
Paracord lanyardDimensions
Height 18 mm
Length 136 mm
width 40 mm
Weight 190gThe details
Alox material
Lockable Yes
One handed blade Yes
No. of features 4
Color RedV0.9415.D20 -
Victorinox - Evoke BSH Alox knife - Navy Camouflage - 0.9425.DS222 - coltello
Con l’avventura quotidiana nel suo DNA, Evoke BS Alox è il coltello ripiegabile ideale per aiutarti a intagliare un sentiero in un territorio sconosciuto. Intrepido e ricco di stile, questo strumento indispensabilmente elegante stupisce con la sua funzionalità innovativa. Le caratteristiche intelligenti vanno dal perno per pollice rimovibile per aprire la lama senza sforzo a un’utilissima clip per il trasporto rimovibile.
- Il coltello chiudibile perfetto per le avventure quotidiane, con perno per pollice rimovibile
- Coltello realizzato in Svizzera con 4 funzioni
- Con clip di trasporto rimovibile e guance in Alox resistenti ed eleganti
Destinazione d'uso: Sportivo
Strumenti
- Lama, grande
- Perno per pollice, rimovibile
- Clip di trasporto
- Foro cordoncino
Dimensioni
Altezza 18 mm Lunghezza 136 mm ampiezza 40 mm Peso 180 g I dettagli
Materiale Alox Bloccabile Sì Lama a una mano Sì N. di caratteristiche 4 Colore navy camouflage V0.9425.DS222 -
Victorinox - Evoke BSH Alox knife - Olive Green - 0.9425.DS24 - knife
With everyday adventure in its DNA, Evoke BS Alox is the ideal folding knife to help you carve a path into unfamiliar territory. Bold and stylish, this indispensablely elegant instrument impresses with its innovative functionality. Clever features range from a removable thumb stud for effortless blade opening to a very useful removable carrying clip.
The perfect folding knife for everyday adventures, with removable thumb stud
Swiss made knife with 4 functions
With detachable carrying clip and tough, stylish Alox scalesIntended use: Sport
Instruments
Llama, great
Thumb pin, removable
Carrying clip
Cord holeDimensions
Height: 18 mm
Length: 136mm
width: 40 mm
Weight: 180 gMaterial: Alox
Lockable: Yes
One handed blade: Yes
No. of features: 4
Green colourV0.9425.DS24