Knives, collection knife, tactical knives, outdoor knives

Type of production: Artisan
Production Lama: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: Black Blood
Handle: Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 236mm.
Balancing: set back
Weight: 274g.
Sheath: in kydex
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences

Use: Neck Knife / Collection

Type of production: Artisan
Production Lama: Italy
Blade: integral, D2 steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 180mm.
Balancing: set back
Weight: 130g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes compared to the product photographed

Reventon knife, no longer in production for years and limited to 2000 pieces, withdrawn from a private collection globally in excellent condition - Complete with everything, plastic box and certificates. Checked and certified by our internal laboratory.

Extrema Ratio was chosen by Automobili Lamborghini to produce the Reventón Folder, an emergency knife, belt cutter and glass breaker, designed by the Lamborghini Style Center, which becomes the official equipment of each of the 20 Reventón produced, the most exclusive supercar of the House of Bull.

The "Reventón Folder" is an accessory of the highest functional and aesthetic level, clearly in line with the philosophy of the car built with concepts and technologies directly borrowed from the most advanced aviation industry.

The knife is produced in a limited edition of 2,000 pieces, the first twenty equip the Reventón, the other 1980 pieces will be available for collectors.

Intended use: Collection

Type of production: Industrial
Production Lama: Italy
Blade: N690Co 58HRC stainless steel
Blade treatment: Testudo
Handle: Anticorodal
Blade length: 120mm.
Blade thickness: 6.3mm.
Closed length: 155mm.
Total length: 260mm.
Thick when closed: 21mm.
Balancing: -
Weight: 235g.
Closure: Back Lock with safety catch
Clip: -
Sheath: -
Packaging: plastic box with Lamborghini and Reventon logos
Notes: Specimen number 297 out of 2000, unique piece at our disposal

Use: Neck Knife / Collection

Type of production: Artisan
Production Lama: Italy
Blade: integral, D2 steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 180mm.
Balancing: set back
Weight: 130g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes compared to the product photographed

Type of production: Artisan
Production Lama: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: Ice Brush Tiger
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 238mm.
Balancing: set back
Weight: 264g.
Sheath: in ckydex
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences

Intended Use: Sporting / Collection

Type of production: Industrial
Country of Production: Italy
Blade: stainless steel M390 58/60HRC
Blade treatment: PVD Blacwashed
Handle: Titanium with PVD Blacwashed treatment
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Titanium machined from solid
Packaging: box with Fox Knives logos, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"

Knife withdrawn from private collection presumably dating back to the first half of the 1980s - overall in good condition - knife still has factory sharpening, but now ineffective - has a couple of small scratches on the blade and a few small marks on the guard - comes with Randall handcrafted leather sheath in excellent condition - Checked and certified by our in-house lab. 

Randall's Model 11 was designed in 1952 by Tommy Thompson, noted Alaskan guide. An otima blade for skinning big game, it features a serrated top of the blade to facilitate thumb placement and prevent thumb slippage.

Intended use: hunting/collecting

Type of production: handcrafted
Country of manufacture: USA
Blade: O-1 carbon steel
Blade finish: satin-finished
Handle: deer antler, with brass guard
Blade length: 855mm.
Blade thickness: 4mm.
Total length: 195mm.
Balance: set back, at 2cm.
Weight: 165g.
Sheath: Leather
Notes: knife withdrawn from private collection, overall in good condition

Knife withdrawn from private collection, out of production, made between 1997 and 1999 by Ontario from a Randall's Training Adventure (RAT) design; in the following years the collaboration between Ontario and RAT was discontinued since the latter founded their own knife company (ESEE) with which they would directly produce all their hiking models. - Overall in good condition, with some minor scuff marks on the blade finish and thermoplastic sheath - Original factory sharpening, in excellent condition - No box or certificates - Checked and certified by our in-house lab.

Intended use: hiking / utility

Type of production: Industrial
Country of manufacture: USA
Blade: Fulltang, D2 steel with powder-coated finish
Handle: Micarta
Blade length: 99mm.
Blade thickness: 3.5mm.
Total length: 200mm.
Balance: backward
Weight: 157g.
Sheath: thermoplastic, with TEK-LOK attachment.
Notes: discontinued knife, produced in the late 1990s, withdrawn from private collection, overall in good condition

Knife withdrawn from private collection, dates from the very first production in 1984 (in fact, it does not indicate the patent engravings, affixed in 1985 and does not indicate the production date, affixed only from 1986). Globally in good condition, it has marks on the blade and handle due to the normal passage of time and the very aggressive scabbard which, containing a spring-loaded metal foil, irreparably scratches the blade both in insertion and extraction - It still has the factory sharpening and comes with a compass in the tang and two harpoons already engaged on the guard branch; lacking instead the box and additional accessories - Checked and certified by our in-house laboratory.

Intended Use: Sporting / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: knife made entirely of 420HC stainless steel
Blade finish: satin-finished
Handle: hollow, stainless steel, with rear screw cap
Blade length: 185mm.
Blade thickness: 7.5mm.
Total length: 315mm.
Balance: set back from the guard branch
Weight: 675g.
Scabbard: black ABS
Notes: The feature, patented, is the presence of two removable screw-on harpoons/hooks. The function of these is simple anchorage. In fact, this knife can be used as a throwing hook by attaching a rope to the ring on the pommel. The manufacturer guarantees a harpoon hold of up to 600 pounds. The Navy Seals, specifically, had requested a knife that could be used underwater in order to anchor the vehicles to an underwater attachment point, and that is the reason for the total steel construction.

Discontinued and no longer available model designed by Hinderer - Knife withdrawn from private collection, globally in excellent condition, with factory sharpening and original box - Originally with Carbon Fiber grip (included), accompanied by 2 additional aftermarket G10 grips and additional bronze-colored anodized titanium hardware - All original Zero Tolerance hardware is also included in the package - Checked and certified by our in-house laboratory.

Intended Use: Sporting/Tactical

Type of production: Industrial
Country of Production: USA
Blade: Elmax stainless steel
Blade Finish: Stonewashed
Handle: Stainless Steel and (originally) Carbon Fiber + 2 additional G10 grips
Blade Length: 82mm.
Blade thickness: 3mm.
Length closed: 113mm.
Total length: 196mm.
Thickness when closed: 12mm.
Weight: 145g.
Closure: Frame Lock
Clip: stainless steel, removable and multi-position (only on the carbon fiber gauntlet)
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - SpeedSafe opening system - Knife withdrawn from private collection equipped with 2 additional aftermarket G10 cheek pieces and custom titanium hardware, with bronze-colored anodizing

Intended Use: Sporting / Collection

Production Type: Industrial
Country of manufacture: Taiwan
Blade: M390 stainless steel
Blade treatment: Black PVD
Handle: titanium and G-10 jade
Blade length: 90mm.
Blade thickness: 2.6mm.
Total length: 196mm.
Weight: 100g.
Clip: titanium, machined from billet
Locking mechanism: Framelock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Brad Zinker - Ball bearing opening system

Vintage knife produced in Portland in 1972 characterized by an extremely penetrating full flat type of sharpening, designed specifically for hunting use - Knife withdrawn from private collection - Overall in very good condition - Never used, a few small marks on the leather sheath, due to the passage of time - Free of packaging - Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Collection / Vintage / Hunting

Type of production: industrial
Country of manufacture: USA
Blade: 440C stainless steel
Blade finish: mirror polish
Handle: stainless steel guard and pommel, brass spacers, macassar ebony handle
Blade length: 115mm.
Blade thickness: 3mm.
Total length: 225mm.
Balance: backward
Weight: 191g.
Sheath: leather
Packaging: -
Notes: Vintage knife from 1972 - Withdrawn from private collection globally in very good condition - Unpacked

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Italy
Blade: stainless steel M390 61HRC
Blade treatment: satin finish
Handle: titanium and carbon fiber with copper inserts
Blade length: 88mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 142g.
Clip: titanium, machined from billet
Closure: frame lock
Packaging: cardboard box with Boker Plus logos, zippered pouch, warranty certificate
Notes: Design by Jens Anso - Limited edition of only 500 pieces numbered on blade, box and certificate

Intended use: Utility

Type of production: Industrial
Country of production: Germany - Solingen
Blade: RWL-34 61 / 62HRC stainless steel ful tang
Blade finish: Satin
Handle: Micarta
Blade length: 79mm.
Blade thickness: 2.4mm.
Total length: 174mm.
Weight: 63g.
Sheath: in leather, with UltiClip attachment
Packaging: cardboard box with Boker logos
Notes: Design by Alex Kremer

Intended Use: Utility / Bushcrat / Hunting

Production type: Industrial
Country of Production: USA
Blade: 420HC stainless steel full tang
Blade treatment: Satin finish
Handle: Micarta Mossy Oak
Blade length: 86mm.
Blade thickness: 3.5mm.
Total length: 210mm. 
Balance: on the guard branch
Weight: 148g.
Scabbard: Belt, leather, for vertical carrying.
Packaging: Cardboard box with OKC logos
Notes: -

We developed the M311 SPELTER knife in collaboration with members of advanced aerial observation units, close protection teams and special air operations. During the development of the knife we focused on using their experience and needs. Thanks to this unique cooperation, we had the opportunity to truly verify the quality of the chosen materials, design and overall construction of the product. The knife has been tested for a long period in extreme environments and various climates, including the hot, dry and humid areas of Asia, as well as the icy areas beyond the polar circle.

Intended Use: tactical / military / collection

Type of production: Industrial
Blade production: Czech Republic
Blade: full tang, stainless steel Elmax 60HRC
Blade Finish: Black DLC
Handle: Micarta
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 275mm.
Weight: 286g.
Sheath: Kydex, thermoformed, with double MOLLE compatible loop.
Package: Cardboard box with ANV logos
Notes: -

M73 Kontos incorporates all the basic components of Acta Non Verba's M-line knives. It has a carefully contoured full tang design and a lightweight handle for perfect balance. Its blade is made of Swedish Sleipner steel coated with Cerakote, with a 3D machined micarta handle. The M73 KONTOS is clearly recognizable by its hexagonal pommel, machined from an original track stop from a T-72M tank. It comes with a self-locking Kydex scabbard accompanied by a pair of spring compatible clips.

Intended use: tactical / military / collection

Manufacturing Type: Industrial
Blade production: Czech Republic
Blade: Full tang, Sleipner steel 58HRC
Blade Finish: Cerakote
Handle: Micarta
Blade length: 125mm.
Blade thickness: 3mm.
Total length: 265mm.
Weight: 228g.
Sheath: Kydex, thermoformed, with double MOLLE compatible loop.
Package: Cardboard box with ANV logos
Notes: The design of the knife is inspired by the T72M tank supplied to the former Czechoslovakian army in the 80's - The length of the blade has the same diameter as the caliber of the tank cannon - The hexagonal pommel of the knife is made using the original fasteners of the tracks of the T-72M tanks.

Intended use: Sports

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: black
Handle: G10
Blade length: 86mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 201mm.
Weight: 145 g.
Clip: in stainless steel, with gold anodizing
Closure: lining lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Note: design by Jesper Voxnaes

Myto is the new hi-tech EDC folding knife that fits perfectly in your pocket and can be used for all daily activities. Its geometry and Molletta's elegant and minimal design marry perfectly with his strength:

has a M390 sintered steel blade with satin finish equipped with "" ReF "" (Removable Flipper system) and a Double Crown ball bearing system for a more stable blade and a smoother movement
has a SOLID® titanium clip screwed to the frame by a tungsten carbide glass breaker.
the locking bar is reinforced with a hardened steel insert to avoid wear due to blade rotation.

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Chad Nichols Stainless Damascus
Blade treatment:
Handle: titanium
Blade length: 83mm.
Blade thickness: 4mm.
Total length: 201mm.
Thick when closed: -mm.
Weight: 118g.
Closure: Frame Lock
Clip: titanium
Packaging: Elegant fully recyclable cardboard box
Notes: Carson Flipper opening system on ball bearings

Intended Use: Sporting/EDC

Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Locking mechanism: Framelock
Clip: titanium, removable, deep pocket type.
Sheath: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos 
Notes: Tungsten carbide rear glass breaker - Design by Bob Terzuola

Intended Use: Sporting/EDC

Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Closure: Framelock
Clip: titanium, removable, deep pocket type.
Scabbard: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos 
Notes: Tungsten carbide rear glass breaker - Design by Bob Terzuola

Intended Use: Tactical / Military

Production type: Semi-Industrial
Country of Production: USA
Blade: Full tang in 1095 58/60HRC steel
Blade Finish: Tactical Stone Coating
Handle: G-10
Blade Length: 89mm.
Blade thickness: 5mm.
Total length: 219mm.
Weight: 192g.
Sheath: Kydex sheath with metal belt clip rotatable 360° and tinder box included.
Package: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity.

NON-automatic version of the Caimano Nero model

The Black Caiman is a tactical knife that Extrema Ratio, official supplier of Comsubin, has developed and delivered to the G.O.I. (Gruppo Operativo Incursori) of the Italian Navy. Its name recalls and pays homage to the heroic Caimani Neri del Piave, a department of Arditi of the Regia Marina and other components on a voluntary basis, which during the First World War crossed the Piave River by swimming to carry out raids in enemy territory.

Spear Point" 4 mm blade with asymmetrical rounding and partial sharpening of the counterbore to increase the penetration coefficient. The toothing on the blade allows you to cut cables and fabrics with high resistance preserving the sharpness.

It is a medium folder with a robust structure. The thick aluminum cheeks, thanks to the many processes of removal make the knife light and balanced. The end of the handle, which recalls the shape of the Helix/Timon group of the slow running torpedo (S.L.C.), serves to improve the grip for the rapid extraction of the knife from the pocket.

The DLC-coated titanium clip can be positioned at three different angles on either side to allow for maximum customization of the carry. Its shape is designed to minimize the bulk of the handle outside the pocket.

Among its endowments, besides the carbide glass breaker, there is also a safety, that when inserted, preserves from a dangerous accidental closing of the blade.

Destination of use: Tactical/Military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal
Blade length: 93mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total lenght: 231mm.
Weight: 180g.
Closure: Liner Lock
Clip: deep pocket, reversible and removable, in stainless steel
Notes: Additional safety stop, when knife is open

Knife taken from private collection - In very close to new condition, has only a couple of small marks on the tip, on the blade, given by the rubbing in insertion / extraction with the kydex sheath - Never used, never resharpened, still has the factory sharpening - Complete with all accessories and ABS case - Checked and certified by our internal laboratory.

Intended use: military / sub / multi role

Production Type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC with belt cutter and central loop for shackles
Blade finish: Burnishing MIL-C-13924
Handle: Nylon abrasive non-slip, stainless steel skull crasher and elastic grip system (dragon) in Cordura
Blade length: 150mm.
Blade thickness: 6.3mm.
Total length: 298mm.
Balance: backward, at 4cm.
Weight: 380g.
Sheath: modular - soft shell in closed cell polyethylene foam, rigid shell in kydex with cordura thigh strap system with anti-extraction safety stop. It can be used also as a rigid thigh piece only with kydex sheath or as multi-position sheath thanks to the double Tek-Lok attachment included.
Package: ABS case with Extrema Ratio logos
Notes: the package includes a spray lubricant, a small diamond sharpener that fits in the scabbard, a large diamond sharpener joined to the ABS scabbard, spare straps to modulate the scabbard, two Tek-Lok attachments, spare accessories, spare o-rings, rubber to clean the blade.

Original and official reproduction under movie license of the knife used in the movie Rambo - Last Blood

Intended use: Collection

Production type: Industrial
Country of Production: China
Blade: Full tang stainless steel 7Cr17MoV
Blade treatment: Dual Tone
Handle: G10
Blade length: 229mm.
Blade thickness: 5.5mm.
Total length: 381mm.
Balance: Advanced
Weight: 800g.
Scabbard: leather
Package: Cardboard box with Rambo Last Blood logos
Notes: Original and official product, with Lionsgate movie licenses

Intended use: Bushcraft / Utility

Type of production: Semi-Industrial
Production Lama: USA
Blade: full tang in 1095 steel 58 / 60HRC
Blade treatment: Black Traction Coating
Handle: Micarta
Blade length: 100mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Thick when closed: -
Weight: 191g.
Sheath: in Kydex with 360 ° rotatable metal belt clip
Packaging: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity

Intended use: Utility / Tactical

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58 / 60HRC stainless steel with stonewash finish
Handle: Black Canvas Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: advanced to 1cm
Weight: 190g.
Sheath: leather
Packaging: cardboard box with Fox logos
Note: -

Assembled with fiberglass reinforced nylon rear spacers and Torx® fasteners.

Advanced protection: Black coating improves corrosion resistance

STURDY AND LIGHTWEIGHT: The glass reinforced nylon handle is strong and lightweight

Blade: In 8Cr13MoV 57 / 58HRC stainless steel
Handle: Glass-Reinforced Nylon
Blade length: 79 mm.
Blade thickness: 2.3 mm.
Total length: 181 mm.
Weight: 65 g.
Closure: Liner Lock
Clip: in stainless steel
Notes: equipped with LAWKS safety catch and "Carson Flipper" guard

The Boker Plus Cataclyst Flipjoint features a flipper opening blade, it does not lock when open, but is simply held securely in place by a retaining ball. With appropriate pressure on the back of the blade, the blade can be folded back without releasing a locking device.

The sleek design features a textured black G10 grip that is three-dimensionally milled and has a weight-saving recess inside. Supplied with a deep pocket clip and a drawstring hole.

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: 440C steel
Blade treatment: satin finish
Handle: steel and G10
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 173mm.
Weight: 77g.
Clip: monolithic, removable
Closure: slipjoint
Packaging: cardboard box with Boker Plus logos
Notes: opening by Carson Flipper system on ball bearings

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel VG10
Blade treatment: black coating
Handle: steel liners and G10 grips
Blade length: 90mm.
Blade thickness: 2.5mm.
Total lenght: 213mm.
Weight: 82g.
Clip: removable, stainless steel
Closure: liner lock
Package: cardboard box with Boker Plus logos, nylon case with zipper 
Notes: Design by Lucas Burnley - ball bearing flipper opening system

Intended use: Hunting / Sports

Type of production: Artisan
Production Lama: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: -
Total length: 185mm.
Thick when closed: -
Balancing: -
Weight: 79g.
Closure: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -

Knife acquired from a private collection - Overall in very good condition, with factory sharpening - Rare version, one of the first, with flat G10 handle - Hardened by Paul Bos, with logo present on the right heel of the blade - It has some small signs of abrasion on the tigerstripe finish, common to all Strider knives - Checked and certified by our internal laboratory.

Intended Use: Tactical

Manufacturing Type: Mid Tech (semi-craft)
Country of Production: USA
Blade: Stainless steel CPM-S30V hardened by Paul Bos
Blade Treatment: Tiger Stripe
Handle: G10 flat with 2mm titanium liners
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thickness closed: 18mm.
Weight: 228g.
Closure: Liner Lock
Clip: Titanium 
Package: Nylon pouch with zipper 
Notes: Rare version, one of the first, with G10 flat grip - Hardened by Paul Bos, with logo on the right heel of the blade

The modern Boker Plus Aphex Mini is the scaled-down version of the Boker Plus Collection 2020 designed by Lucas Burnley. The finely sharpened blade is made from VG-10 and comes with an impressive finish. Thanks to the ball bearings and pinball machine, the knife is particularly easy to open. The ergonomically shaped handle is three-dimensionally milled from titanium and decorated with a modern carbon fiber inlay.

Intended use: Collection

Type of production: Industrial
Country of production: Taiwan
Blade: in VG10 steel
Blade treatment: Satin
Handle: titanium with carbon fiber insert
Blade length: 78mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 96mm.
Weight: 78g.
Clip: titanium
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Notes: Design by Burnley

The BF2 is a "full size" lockable particularly suitable for professional use by military and police operators in the field. The handle is firm and comfortable; the clip, reversible and enveloping, becomes a useful and comfortable support for the thumb in "reverse grip". The grip is full with the characteristic lowered surfaces to engage the opening "pins" without protruding from the profile of the closed knife. The blade, available in a drop or a lot version, has a flat edge and, as in the BF1, a particularly thick and resistant tip. The blade locking mechanism is the tested LINER-LOCK, assisted by a safety mechanism to be operated manually protected by a casing.

Intended use: Tactical / Military

Type of production: industrial
Blade: N690Co 58HRC stainless steel
Country of production: Italy
Handle: Anticorodal
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 124mm.
Total length: 210mm.
Balancing: -
Weight: 142g.
Closure: Liner Lock
Clip: reversible and removable in stainless steel
Sheath: -
Notes: Safety stop with open knife

Il BF2 è un chiudibile “full size” particolarmente indicato per l’impiego professionale da parte di operatori militari e di polizia sul campo. L’impugnatura è salda e confortevole; la clip, reversibile ed avvolgente, diventa un utile e comodo appoggio per il pollice in “reverse grip”. La guancetta è piena con i caratteristici piani ribassati per impegnare i “pin” d’apertura senza che sporgano dal profilo del coltello chiuso. La lama, disponibile in versione drop o tanto, ha l’arrotatura piatta e, come nel BF1, la punta particolarmente spessa e resistente. Il meccanismo di blocco della lama è il collaudato LINER-LOCK, coadiuvato da un meccanismo di sicura da azionare manualmente protetto da un carter. 

Destinazione d'uso: Tattico/Militare

Tipo di produzione: industriale
Lama: in acciaio inox N690Co 58HRC
Paese di produzione: Italia
Impugnatura: Anticorodal
Lunghezza lama: 90mm.
Spessore lama: 3mm.
Lunghezza chiuso: 124mm.
Lunghezza totale: 210mm.
Bilanciatura: -
Peso: 142g.
Chiusura: Liner Lock
Clip: reversibile ed amovibile in acciaio inox
Fodero: -
Note: Fermo di sicurezza a coltello aperto

Intended use: sporting

Type of production: industrial
Blade: Three layers rolled 3G steel (VG2 and SGPS at 62 HRC)
Blade finish: Satin finish
Country of Production: Japan
Handle: Stainless Steel 420J2 and Wood
Blade Length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 180mm.
Weight: 75g.
Closure: Liner Lock
Clip: Absent
Sheath: Nylon, with Velcro closure
Notes: -

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, a giant of the American knife guild, who passed away in 2010. 

Intended use: collectible/sporty

Blade: 59HRC Elmax stainless steel
Handle: 420J2 stainless steel and Elforyn inserts
Blade length: 67mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 165mm.
Weight: 72g.
Closure: Liner Lock
Clip: not present
Scabbard: Nylon 
Notes: -

Based on the award-winning ZT 0999, the 0990 simplifies this legendary design. Despite the skeletonized structure, this ZT is reliable and robust thanks to the steel structure.

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber and steel
Blade length: 83mm.
Blade thickness: 3mm.
Closed length: 114mm.
Total length: 193mm.
Thick when closed: 114mm.
Weight: 82g.
Closure: liner lock
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: flipper opening system on ball bearings - Manual KVT ball bearings

Intended use: Utility

Type of production: Industrial
Country of production: China
Blade: ful tang in D2 steel
Blade finish: Stonewashed
Handle: G10
Blade length: 58mm.
Blade thickness: 4.7mm.
Total length: 160mm.
Weight: 93g.
Sheath: in Kydex
Packaging: cardboard box with Boker Plus logos
Notes: Design by Dirk Hofmeister - reversible clip integrated into the knife

THE BRAND
Exclusive collaboration between Coltelleria Collini and Extrema Ratio marketed under the brand KNIVES.IT. 

TECHNICAL DATA SHEET
Intended Use: Collection / Tactical / Neck knife
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade finish: Black PVD cat. MIL-C-13924
Handle: Stainless steel N690Co 58/60HRC
Blade length: 40mm.
Blade thickness: 5.5mm.
Total lenght: 166mm.
Weight: 86g.
Sheath: optional (available separately) in Kydex, handcrafted by the Italian Knife Maker Simone Tonolli.
Package: cardboard box with Extrema Ratio logos
Notes: knife created and manufactured by Extrema Ratio - each knife is numbered - Design by LoTactical

HISTORY
The Tengu takes its name from a mythical creature of Japanese folklore that is represented with both human and raven features, they had the reputation of being great warriors and legends say that some founders of martial arts were trained by them.

- It is designed to be used in many different grips, but is especially effective in the reverse grip.
- Designed to be carried in a variety of ways, whether as a neck knife, under shirt, clipped in a pocket or around the waist using optional systems such as Ulti-Clip or Tek-Lok or various M.O.L.L.E. type attachments.
- With its thickness of 5.5 mm. is extremely robust and thanks to the shape of the handle is comfortable even by those with large hands or those who want to use it with tactical gloves.
- The blade is compact, robust and very functional for both precision cutting and hard materials thanks to the serrated part on the back. The tanto-shaped tip is very robust and optimal for engraving work.

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: in stainless steel damascus
Blade treatment: satin finish
Handle: titanium
Blade length: 86mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 42g.
Clip: titanium
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Kansei Matsuno

Based on the well-known MK-8, designer Dietmar Pohl has developed the new Tactical Eight Black. Reduced in weight and more compact in size, the Tactical Eight Black is still a knife in all respects, versatile for professional users.

The sturdy Bowie blade over 17cm long and 6mm thick is suitable for a wide range of applications. For high edge retention and blade resilience, the choice fell on the well-known D2 tool steel.

The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion. A hidden hole at the end of the grip offers the possibility to mount a lanyard (included).

The Kydex® sheath of the Tactical Eight Black with a material thickness of 2.5 millimeters provides the basis for a well thought-out and durable carrying system that fully meets the high demands placed on a tactical knife in practice.

Intended use: Collection / Sports

Blade: Full tang in D2 steel at 59 / 60HRC
Handle: In G-10
Blade length: 174mm.
Blade thickness: 6mm.
Total length: 315mm.
Weight: 375g.
Sheath: in kydex
Packaging: box with numbered certificate

Based on the well-known MK-8, designer Dietmar Pohl has developed the new Tactical Eight. Reduced in weight and more compact in size, the Tactical Eight is still a knife in all respects, versatile for professional users.

The sturdy 17.4cm long and 6mm thick Bowie blade is suitable for a wide range of applications. For high edge retention and blade resilience, the choice fell on the well-known D2 tool steel.

The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion. A hidden hole at the end of the grip offers the possibility to mount a lanyard (included).

The Kydex® sheath of the Tactical Eight with a material thickness of 2.5mm provides the basis for a well thought-out and durable carrying system that fully meets the high demands placed on a tactical knife in practice.

Intended use: Collection / Sports

Blade: Full tang in D2 steel at 59 / 60HRC
Handle: In G-10
Blade length: 170mm.
Blade thickness: 6mm.
Total length: 315mm.
Weight: 375g.
Sheath: in kydex
Packaging: box with numbered certificate

Basato sul noto MK-9, il designer Dietmar Pohl ha sviluppato il nuovo Tactical Nine. Ridotto nel peso e più compatto nelle dimensioni, il Tactical Nine è comunque un coltello a tutti gli effetti.

La robusta lama spear point lunga 20 centimetri e spessa 6 millimetri è adatta per un'ampia gamma di applicazioni. Per un'elevata ritenzione del filo e resilienza della lama, la scelta è ricaduta sul noto acciaio per utensili D2.

La finitura stonewashed crea una superficie antigraffio e aumenta anche la resistenza della lama alla corrosione. Il design delle guancette a forma di gradino offorno una presa eccellente e sicura. Per lavori potenti o delicati, l'incavo delle dita pronunciato e anche arrotondato davanti alla protezione consente al coltello di protendersi in avanti. Un foro nascosto all'estremità della maniglia offre la possibilità di montare un cordino (incluso).

Il fodero in Kydex del Tactical Nine ha uno spessore del materiale di 2,5 millimetri che fornisce la base per un sistema di trasporto ben congegnato e resistente e che soddisfa pienamente le elevate esigenze poste in pratica su un coltello tattico. Un cosciale, regolabile all'infinito nelle dimensioni, con chiusura a scatto consente di fissarlo alla coscia di chi lo indossa. 

Destinazione d'uso: Collezione/Sportivo

Lama: Full tang in acciaio D2 a 59/60HRC
Impugnatura: In G-10
Lunghezza lama: 200mm.
Spessore lama: 6mm.
Lunghezza totale: 345mm.
Peso: 482g.
Fodero: in kydex
Confezione: Patch 3D certificato numerato

Utilizzo: Outdoor

Tipo di produzione: Industriale
Produzione Lama: China
Lama: in acciaio inox 2Cr13MoV
Trattamento Lama: -
Manicatura: Nylon e Fibra di Vetro e paracord
Lunghezza lama: 70mm.
Spessore lama: 7mm. nel punto centrale
Lunghezza chiuso: -
Lunghezza totale: 290mm
Spessore da chiuso: -
Bilanciatura: -
Peso: 455g.
Chiusura: -
Clip: -
Fodero: in Nylon
Confezione: confezione con loghi Sog
Note: 

Usage: Tactical / Collection / Sporty

Production Type: Industrial
Country of Production: China
Blade: Stainless steel 3Cr13MoV
Blade Finish: Satin finish
Handle: GRN (Glass-Reinforced Nylon)
Blade length: 70mm.
Blade thickness: 7mm. in the central point
Total length: 317mm
Weight: 655g.
Sheath: Nylon
Packaging: thermoplastic blister with Sog logos
Notes: -