Year 2023

Higo is one of the most beloved models for Rockstead Knives fans around the world, and HIGOⅡX, with a custom Dark Matter Gold (DMG) carbon fiber coating and a titanium back layer, is one more step in the pursuit of perfection. The blade is made of ZDP189 super stainless steel and features a unique convexity with gradually reduced angle (30 degrees at the middle and 24 degrees at the tip). The variable blade angle is the result of Rockstead's long quest for superior sharpness and cutting ability.

Blade: ZDP-189 stainless steel at 66.7HRC
Handle: anodized titanium and Dark Matter Gold carbon fiber
Blade length: 89mm.
Blade thickness: 3.2mm.
Total length: 216mm.
Weight: 138g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Accompanied by warranty certificate with full technical specifications

Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Marble
Handle: Micarta
Blade length: 135mm
Blade thickness: 5.5mm
Total length: 250mm
Balance: Advanced
Weight: 377g
Sheath: Kydex, thermoformed
Packaging: -
Note: Each knife is unique and handcrafted; there may be slight differences in finishes, colors, and materials compared to the photographed product.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new, never used
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Absent
* Scabbard: Present, original, like new
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratory

Intended Use: Collecting/Hunting/Sporting

Production type: Midtech
Country of Production: USA
Blade: A2 55/57HRC steel
Blade Treatment: gunkote
Handle: A2 55/57HRC steel with alluminium screwed cap
Blade length: 108mm.
Blade thickness: 4mm.
Total length: 205mm.
Weight: 203g.
Sheath: Black leather
Packaging: -
Notes: knife withdrawn from private collection like new, lacks packaging and certificates

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory



The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.

Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

Type of production: Artisan
Country of manufacture: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Stone Edge
Handle: Micarta
Blade Length: 240mm.
Blade thickness: 6.5mm.
Total length: 403mm.
Balance: backward
Weight: 740g.
Sheath: made of thermoformed kydex
Packaging: bulk knife inserted in its own sheath, warranty certificate filled in by hand
Notes: Each knife is unique and handcrafted

Type of production: custom made
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Black Blood
Handle: Micarta
Blade Length: 240mm.
Blade thickness: 6.5mm.
Total length: 403mm.
Balance: backward
Weight: 740g.
Sheath: made of thermoformed kydex
Packaging: bulk knife inserted in its own sheath, warranty certificate
Notes: Each knife is unique and handcrafted

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like New
* Commercially available 2018 Exemplar; currently offering other variants in other configurations.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended use: collectible/sporting/military

Production type: Midtech
Country of manufacture: South Africa
Blade: stainless steel CPM-S35VN
Blade treatment: blackwash
Handle: integral, machined titanium from solid, blackwash finish
Blade length: 103mm.
Blade thickness: 4.5mm.
Length closed: 132mm.
Total length: 234mm.
Thickness when closed: 16mm.
Weight: 191g.
Opening: Carson Flipper type, on ball bearings
Closure: FrameLock
Clip: titanium, machined from billet
Packaging: plastic case with ADV Tactical logos
Notes: entirely designed and built by Andre De Villiers in his own workshop

Type of production: Artisan
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw
Handle: Micarta
Blade length: 135mm.
Blade thickness: 5.5mm.
Total length: 250mm.
Balancing: advanced
Weight: 377g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Knife retired from a private collection - In excellent condition, complete with certificates, original box, maintenance key. A rare specimen from 1998, made of BG42 steel with exquisite titanium handle artwork. Checked and certified by our in-house Coltelleria Collini laboratory.

KNIFE RETIRED FROM PRIVATE COLLECTION

Type: Previously Purchased and Used
Condition: In excellent condition
Commercial availability: Item produced in 1998
Sharpness: Factory sharpness
Blade marks: None
Handle marks:
Box: Present
Sheath: Cordura
Manuals, Certificates, and Warranties: Yes
Checked and Certified by our in-house laboratory
Intended Use: Collection

Production Type: Mid-Tech
Country of Production: USA
Blade: BG-42 Stainless Steel 60/61HRC
Handle: Polished Titanium with Computerized "Unique Graphic" Black Onyx Cabochon
Blade Length: 75mm.
Blade Thickness: 3mm.
Closed Length: 100mm.
Overall Length: 175mm.
Closed Thickness: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: Removable, Titanium
Packaging: White cardboard box with Chris Reeve logos and warranty certificates

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Conditions: in excellent conditions
Available in the market: NO
Sharpening: Original
Marks on blade: NO
Marks on handle: NO
Packaging: NO, without original box
Checked and Certified by our internal laboratory
Intended use: Tactical/Military

Blade: in 154CM stainless steel
Blade Production: USA
Handle: Zytel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balancing: -
Weight: 113g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: without box

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Condition: in good condition
Available in stores: NO
Sharpening: Resharpened by our internal laboratory
Marks on blade: NO
Marks on handle: YES, small scratches
Packaging: YES
Checked and Certified by our internal laboratory
A pollywog represents metamorphosis in the animal kingdom, adapting and changing its form to survive in its environment. The same principle applies here. The Spyderco Poliwog CLIPIT® thrives in a small-knife-friendly environment while keeping the features necessary to excel in a harsh, heavy cutting and performance setting. Its distinctive opened-ended Ball Bearing Lock™ exposes the knife's inner workings for easy cleaning and rates as one of Spyderco's highest strength locking mechanisms. Pulling back on the ball unlocks the blade ambidextrously from either side of the knife.

The hand settles on the curved handle positioning the index finger into a choil that optimizes control and generates less fatigue and pressure on the hand during cutting. Made from VG-10, the blade has a hollow-ground edge with a weight reducing swedge-grind extending mid-spine to the tip. It is available in PlainEdge. Its ambidextrous wire-tension pocket clip sets the Poliwog tip-up in the pocket.

Intended use: Sporting / EDC

Type of production: Industrial
Blade Production: Japan
Blade: in VG10 stainless steel
Blade Treatment: -
Handle: in steel
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: 86mm.
Total length: 145mm.
Thickness when closed: -
Balance: -
Weight: 116g.
Closure: Ball Bearing Lock™
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: -

Knife withdrawn from private collection - Rare model no longer in production.

The Zero Tolerance 0500 model, also known as MUDD, was designed by Grant and Gavin Hawk. This knife is resistant to sand, dirt, and water thanks to the neoprene seals around the pivot and the lock.

The blade is coated in Tungsten DLC, approximately 9.2 cm long, and made of 154CM steel.

The handle is made of aluminum with textured G-10 grips, providing a solid grip.

This model was manufactured roughly between 2007 and 2009, and although the exact number of pieces produced is not known, estimates suggest a low quantity, probably between 1000 and 2500 units.

NOS FULL SET KNIFE, NEW FROM STOCK

Type: withdrawn from private collection
Condition: Like new
Available in the market: Out of production since 2009
Sharpening: Factory
Marks on blade: No
Marks on handle: No
Box: Included
Sheath: -
Manuals, Certificates, and Guarantees: Included
Checked and Certified by our internal laboratory

NOS FULL SET KNIFE, NEW FROM STOCK
* Type: 2001 NOS new old stock - New from stock.
* Condition: Like new, never taken out of original packaging.
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.



The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so that it can offer greater freedom of design. Totally ambidextrous, the Ti-Lock is not meant to be a mere exercise in style, but should be understood as a mechanical innovation and a solid and reliable testament to the passion of Chris Reeve and Grant and Gavin Hawk.

Intended Use: Sporting/Collection

Type of production: Semi-manufactured
Country of Production: USA
Blade: CPM-S35VN 58/59HRC stainless steel
Blade Treatment: Stonewashed
Handle: Titanium 6AI4V Stone Washed
Blade Length: 82.5mm.
Blade Thickness: 3.2mm.
Length closed: 100mm.
Total length: 182.5mm.
Weight: 85g.
Closure: Ti-Lock titanium 6AI4V
Clip: Titanium 6AI4V
Packaging: Cardboard box with Chris Reeve logos, certificates
Notes: Design by Grant and Gavin Hawk - NOS knife, new from stock - Includes box and certificates

KNIFE NOS FULL SET, NEW FROM STOCK
* Type: 1995 NOS knife - New Old Stock - New from stock
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory.
* Marks on blade: Given by time
* Marks on handle: Given by time.
* Box: Present, original, in very good condition
* Scabbard: Present, original, in very good condition, with small marks given by time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: collection / tactical / sporting

Type of production: Industrial
Country of Production: USA
Blade: Carbon V steel
Blade treatment: varnishing
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balance: advanced
Weight: 265g.
Sheath: Cordura
Packaging: cardboard box with Cold Steel logos and "Made in USA" logos.
Notes: knife from 1995 NOS - New Old Stock - New from stock

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: January 2014 production, previously purchased.
* Condition: Brand new
* Commercially available: Discontinued and no longer available.
* Sharpening: Factory.
* Marks on blade: No
* Marks on handle: Small abrasions given by contact with scabbard.
* Box: Present and original
* Scabbard: Present and original
* Manuals, Certificates and Warranties: Warranty and maintenance sheet.
* Checked and Certified by our in-house laboratory



Intended Use: Heavy Utility

Production type: Midtech
Country of Production: USA
Blade: full tang in D2 steel at 59/60HRC
Blade treatment: Gunkote Green
Handle: polymer
Blade length: 115mm.
Blade thickness: 5.2mm.
Total length: 250mm.
Balance: advanced
Weight: 370g.
Sheath: polymer, with M.O.L.L.E. compatible multi-position attachments.
Packaging: cardboard box with Microtech logos, Maintenance and warranty information
Notes: produced in January 2014 - previously purchased - brand new

Who could have imagined that the Praetorian would conquer the knife world and become a design icon? That was the predetermined size of the design, but someone still wasn't okay with it...so here is the Praetorian Genesis, designed for the for the middle-of-the-road fanatics The Praetorian Genesis is a little smaller than the original, but retains more of a tough-guy look than ever before not scaring off the fearful, but still big enough for any task!

Intended Use: Sporty / EDC

Type of production: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Dual Tone Tumbled & Satin
Handle: Blue Anodized Titanium with "Silver Peaks Warp Speed" artwork
Blade Length: 92mm.
Blade thickness: 5.5mm.
Length closed: 118mm.
Total length: 202mm.
Thickness when closed: 13mm.
Weight: 190g.
Closure system: Frame Lock
Clip: satin-finished titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

Who could have imagined that the Praetorian would conquer the knife world and become a design icon? That was the predetermined size of the design, but someone still wasn't okay with it... so here is the Praetorian Genesis, designed for the for the middle-of-the-road fanatics The Praetorian Genesis is a little smaller than the original, but retains more of a tough-guy look than ever before not scaring away the fearful, but still big enough for any task!

Intended Use: Sporty / EDC

Type of production: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Dual Tone Tumbled & Satin
Handle: Purple Anodized Titanium with "Brushed Silver Flat" artwork and flamed hardware
Blade Length: 92mm.
Blade thickness: 5.5mm.
Length closed: 118mm.
Total length: 202mm.
Thickness when closed: 13mm.
Weight: 190g.
Closure system: Frame Lock
Clip: flamed titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

The Medford Micro Praetorian T is the smallest of Medford's knife line, but no less capable. Although in Ancient Rome they were primarily charged with the defense of the Emperor, the Praetorian Guard was entrusted with a wide range of responsibilities, from fighting fires to protecting imperial interests. The Medford Micro Praetorian T, like its modern cousins and its ancient namesake, can be used for a myriad of tasks, from self-defense to everyday cutting tasks. With its titanium handle and wide, super-strong blade, the Micro Praetorian T is an EDC option that will last a lifetime without taking up too much pocket space.

Intended Use: Sporting / EDC

Production Type: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Vulcan DP PVD
Handle: Bronze Anodized Titanium with "Stained Glass" artwork and bronzed hardware
Blade length: 75mm.
Blade thickness: 5.5mm.
Length closed: 98mm.
Total length: 172mm.
Thickness when closed: 13mm.
Weight: 134g.
Locking system: frame lock
Clip: titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

The Medford Micro Praetorian T is the smallest of Medford's knife line, but no less capable. Although in Ancient Rome they were primarily charged with the defense of the Emperor, the Praetorian Guard was entrusted with a wide range of responsibilities, from fighting fires to protecting imperial interests. The Medford Micro Praetorian T, like its modern cousins and its ancient namesake, can be used for a myriad of tasks, from self-defense to everyday cutting tasks. With its titanium handle and wide, super-strong blade, the Micro Praetorian T is an EDC option that will last a lifetime without taking up too much pocket space.

Intended Use: Sporting / EDC

Production Type: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Black PVD
Handle: Bronze Anodized Titanium with "Stained Glass" artwork and PVD hardware
Blade length: 75mm.
Blade thickness: 5.5mm.
Length closed: 98mm.
Total length: 172mm.
Thickness when closed: 13mm.
Weight: 134g.
Locking system: frame lock
Clip: titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

WAKI XXV ANNIVERSARIUM LIMITED EDITION is a limited series version of only 150 pieces that keeps all the features of the famous Waki model intact.

This product is an elaboration of the Japanese Wakizashi sword, a typical blade 30 to 60 centimeters long, which the Samurai always carried in contact with the body, where the Katana was carried exclusively in battle.

The blade has the classic Japanese Tanto profile and is made of Böhler N690 steel with heat treatments that raise its hardness to 58 HRC for the best combination of edge hold and strength. The blade, with flat rounding, features a precious satin finish.

The handle, in black coloring, is made of Forprene while The black-colored Cordura sheath is equipped with a MOLLE system that ensures safe carrying of the razor-sharp blade by protecting it from shocks that could reduce its efficiency.

WAKI XXV ANNIVERSARIUM LIMITED EDITION comes in an IP67-certified watertight Polypropylene technical case with pressurization valve that is weather, dust and shock resistant. Also inside is a metal plaque with the numbering of the limited series of 150 and a commemorative coin of the twenty-fifth Extrema Ratio anniversary.

Intended Use: Collection / Tactical / Machete

Production type: Industrial
Country of manufacture: Italy
Blade: N690Co stainless steel at 58HRC
Blade Treatment: Satin finish
Handle: Forprene
Blade Length: 297mm.
Blade thickness: 6.5mm. tapering to 4mm from the handle.
Total length: 456mm.
Weight: 384g.
Sheath: cordura, compatible with M.O.L.L.E. systems.
Packaging: polypropylene case with numbered metal plaque and commemorative coin with Extrema Ratio logos
Notes: Limited and numbered edition made in only 150 pieces

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Perfect, like new
* Commercially available: Discontinued
* Sharpening: Factory sharpened, perfect
* Marks on blade: None
* Marks on handle: None
* Box: Present and perfect
* Scabbard: Present and perfect
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory


Intended Use: tactical / collection

Country of Production: Japan
Production type: industrial
Blade: stainless steel AUS-8
Blade Finish: Satin finish
Handle: brown micarta
Blade length: 148mm. 
Blade thickness: 4mm.
Total length: 265mm.
Balance: on the guard branch
Weight: 238g.
Sheath: leather
Notes: previously purchased item, withdrawn from private collection - like new, perfect in every detail - comes with original unopened box

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased, 2004 first series.
* Condition: Perfect, like new
* Commercially available Out of production, replaced by the new versions.
* Sharpening: Factory sharpened, perfect
* Marks on blade: None
* Marks on handle: None
* Box: Present and perfect
* Scabbard: Present and perfect
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory




Intended Use: Tactical / Collection

Type of Production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co
Blade finish: tumbling "Miles"
Handle: Forprene
Blade length: 170mm.
Blade thickness: 6.3mm.
Total length: 315mm.
Weight: 254g.
Sheath: ballistic rubber
Packaging: cardboard box with Extrema Ratio logos
Notes: 2004 first series specimen, with hexagonal hardware, supplied with original box all in like-new condition.

Intended use: collection/sporting

Type of production: MidTech (partially mechanized craft production)
Country of manufacture: South Africa
Blade: stainless steel CPM-S35VN
Blade finish: satin-finished
Handle: PVD titanium with G10 insert
Blade length: 92mm.
Blade thickness: 4mm.
Length closed: 114mm.
Total length: 206mm.
Thickness when closed: 14mm.
Weight: 150g.
Opening: Carson Flipper system on ball bearings
Closure: Button Lock with additional safety
Clip: titanium, laser engraved
Packaging: Nylon pouch with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

On December 9, 1942, during the Second World War, KA-BAR presented a knife to the United States Marine Corps in the hope of it becoming the standard weapon. In collaboration with the Marine Supply Department, the project was revised and the production of an improved combat and utility knife began.

During the war, USMC KA-BAR knives became so renowned for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, and the wars in Iraq and Afghanistan.

In 2019, KA-Bar joined forces with Spartan Blades to establish Pineland Cutlery. CEO John Stitt aimed to create a "KA-BAR" with enhanced strength, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.

CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries and specially designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: Tungsten DLC
Handle: Kraton G with stainless steel 301 guard and Tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Kydex, thermoformed, with belt loops and M.O.L.L.E. compatible
Packaging: Cardboard box with Spartan Blades logos
Notes: -

On December 9, 1942, during World War II, KA-BAR presented a knife to the United States Marine Corps, hoping it would become the standard weapon. In collaboration with the Marine Quartermaster Department, the project was revised, and production began on an improved combat and utility knife.

During the war, USMC KA-BAR knives gained such recognition for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, Iraq, and Afghanistan conflicts.

In 2019, KA-Bar partnered with Spartan Blades to form Pineland Cutlery. CEO John Stitt desired a "KA-BAR" with enhanced durability, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.

CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries, specifically designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: ZrN Flat Dark Earth
Handle: Kraton G with stainless steel 301 guard and tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Kydex, thermoformed, with belt loops and M.O.L.L.E. compatible
Packaging: Cardboard box with Spartan Blades logos
Notes: -

T4000 S Ranger Limited Edition is a limited series version of only 100 pieces based on the T4000 model, a reworking of the Japanese Wakizashi short sword that the Samurai carried at all times in contact with the body.

It is a timeless tactical tool that follows no fashion but faithfully adheres to the Extrema Ratio philosophy aimed at fulfilling all functional requirements.

This model continues Extrema Ratio's purest Tanto series designed especially for lovers of the Japanese blade profile, who do not want to give up typical tactical accessories such as textile sheath and special polymer handle.

The blade, made of Böhler N690 steel hardened to 58 HRC and burnished to MIL - C- 13924, features Geotech Camo customization, Extrema Ratio's innovative and original camouflage pattern made by laser engraving.

The grip, in HCS coloring, is made of Forprene, an elastomer that is part of the "NATO standard" due to its exceptional resistance to extreme conditions.

The black-colored Cordura sheath is and equipped with MOLLE system that allows its carrying on tactical vests and general belts and guarantees the safe carrying of the razor-sharp blade by protecting it from shocks that could reduce its efficiency.

The T4000 S Ranger Limited Edition comes in an IP67-certified watertight Polypropylene technical case with pressurization valve that is weather, dust and shock resistant. Also inside is a double-grit sharpening plate (ceramic abrasive and synthetic diamond) and a metal plaque with the numbering of the limited series of 100.


Intended Use: Tactical/Collection

Type of production: Industrial
Country of Production: Italy
Blade: Bohler N690Co stainless steel at 58HRC
Blade Finish: Burnishing MIL-C-13924 with Geotech pattern
Handle: Forprene
Blade length: 174mm.
Blade thickness: 4mm.
Total length: 304mm.
Weight: 264g.
Sheath: Nylon
Packaging: Polymer case, diamond and ceramic sharpener, Limited run of only 100 pieces

Intended Use: Light Utility

Type of production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 107mm.
Blade thickness: 4mm.
Total length: 234mm.
Balance: backward
Weight: 214g.
Sheath: made of thermoformed kydex, with M.O.L.L.E. compatible belt loop.
Packaging: accompanied by certificate of guarantee and authenticity,
Notes: handcrafted knife

Intended Use: All Round Utility

Type of production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: Stone Edge
Handle: Micarta
Blade Length: 150mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balance: advanced
Weight: 401g.
Sheath: made of thermoformed kydex, with M.O.L.L.E. compatible belt loop.
Packaging: accompanied by certificate of guarantee and authenticity,
Notes: handcrafted knife

Use: Light Utility / All Round

Type of production: Handcrafted
Country of Production: Italy
Blade: integral, D2 steel at 59/61HRC
Blade treatment: Black Raw
Handle: Micarta
Blade Length: 90mm.
Blade thickness: 5mm.
Total length: 204mm.
Balance: backward
Weight: 200g.
Sheath: made of Kydex, thermoformed
Packaging: accompanied by certificate of guarantee and authenticity
Notes: handcrafted knife

Use: Light Utility / All Round

Type of production: Handcrafted
Country of Production: Italy
Blade: integral, D2 steel at 59/61HRC
Blade treatment: Black Raw
Handle: Micarta
Blade Length: 90mm.
Blade thickness: 5mm.
Total length: 204mm.
Balance: backward
Weight: 200g.
Sheath: made of Kydex, thermoformed
Packaging: accompanied by certificate of guarantee and authenticity
Notes: handcrafted knife

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very good condition, close to new
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Some small hairline on heads and metal insert
* Box: Present - Original
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: - - Original
* Checked and certified by our in-house laboratory


Intended Use: Gentleman / Collection

Production type: Industrial
Country of manufacture: Seki - Japan
Blade: AM-6 stainless steel
Blade treatment: satin finish
Handle: iron wood, nickel silver insert, stainless steel heads and brass folders
Blade length: 64mm.
Blade thickness: 2mm.
Length closed: 85mm.
Total length: 147mm.
Weight: 53g.
Closure: Back Lock
Sheath: Nylon, with belt loop and Velcro closure
Packaging: Cardboard box with Al Mar logos
Notes: Previously purchased - Near mint condition - Full Set

Intended use: collection/sporting

Type of production: MidTech (partially mechanized craft production)
Country of manufacture: South Africa
Blade: stainless steel CPM SW35VN
Blade finish: Dual Tone - Sandblasted and Satin finish
Handle: Titanium Dual Tone with Fat Carbon Snake Skin insert
Blade Length: 105mm.
Blade thickness: 4.8mm.
Length closed: 130mm.
Total length: 230mm.
Thickness when closed: 17mm.
Balance: backward
Weight: 248g.
Opening: carson Flipper system on ball bearings
Closure: Frame Lock with removable stainless steel clapper
Clip: Titanium Dual Tone, machined from billet, removable and reversible
Packaging: Nylon pouch with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

This is the latest knife produced in terms of time by Spartan Blades in collaboration with legendary knife maker William "Bill" Harsey Jr.

The SHF 3.25 is the knife many of you have been waiting for! A reliable 6AL4V titanium frame-lock pocket knife with a handcrafted 3.25" damascus steel blade made by Chad Nichols. Easy to carry and comfortable in the hand, this is a truly exceptional knife. Constructed like its award-winning big brother the SHF 3.25 is made entirely of 6AL-4V titanium, except for the pivot, blade and arbor.

This medium-sized folding knife features a reversible pocket clip and two thumb studs that allow it to be carried in either the right or left hand. If you are looking for a high-quality, well-designed folding knife, this is one you should consider!

Intended Use: Collector/Sportsman

Type of manufacture: MidTech
Country of manufacture: USA
Blade: handcrafted stainless damascus steel, by Chad Nichols
Blade treatment: -
Handle: titanium 6AL4V 
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Length closed: 98.5mm.
Total length: 181mm.
Weight: 82g.
Closure: FrameLock
Clip: anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.

Intended Use: Collection/Sportsman

Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpening

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: various marks given by time and use.
* Marks on handle: normal signs of time.
* Box: not present
* Scabbard: present, original, leather, with signs of time.
* Manuals, Certificates and Warranties: not present.
* Checked and Certified by our in-house laboratory.


Created as a cutting tool and emergency instrument for U.S.A.F. pilots, the Camillus Pilot has managed to win a solid reputation worldwide for both its legendary sturdiness and its successful and attractive aesthetics. 

Intended Use: Collection/Tactical

Type of production: Industrial
Country of manufacture: USA
Blade: hidden tang, made of 1095 carbon steel
Blade finish: epoxy powder
Handle: pressed leather rings
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 243mm.
Weight: 255g.
Sheath: leather
Packaging: -
Notes: 1985 knife withdrawn from private collection

KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: light
* Marks on handle: light, on the guard
* Box: Original, with some marks
* Scabbard: Original, leather, with some small marks, also due to the insertion of the knife
* Manuals, Certificates and Warranties: Certificate present
* Checked and certified by our in-house laboratory

This limited edition Magnum Tanto style piece is based on a historical Japanese samurai sword that was popular during the Heian period (794-1185). The modified dagger-style blade, based on a design by the legendary blacksmith Amakumi, refers to the period when samurai lived the 'bushido' or 'way of the warrior'. The shape of this blade is called Kissagi-moroha and is derived from the Kogarasu-maru sword. The material of the blade is 440A stainless steel with a rich two-tone finish. The traditional handle is combined with synthetic material simulating tsuka and ray skin; the Tsuba provides a secure grip. Supplied with a genuine leather sheath and presentation box. Limited to 1,999 pieces worldwide, each serialised.

Intended use: Collection / Utility

Production type: Industrial
Country of manufacture: Taiwan
Blade: Ful tang in 440A steel
Blade finish: satin finish/polishing
Handle: canvas and synthetic ray skin
Blade length: 180mm.
Blade thickness: 5mm.
Total length: 300mm.
Weight: 271g.
Sheath: black leather
Packaging: case with certificate of guarantee
Notes: Numbered and limited edition of 1999 pieces - Serial Number 136

Intended Use: Survival / Utlity / Collection

Production type: Industrial
Country of manufacture: Italy
Blade: Japanese rolled steel (San Mai) with V-Toku2 (carbon) cutting edge at 62/63HRC and SUS410 (stainless) outer cheeks
Blade treatment: Satin finish
Handle: Forprene
Blade length: 175mm.
Blade thickness: 6mm.
Total length: 300mm.
Weight: 365g.
Sheath: nylon, M.O.L.L.E. compatible.
Packaging: cardboard box with Fox logos
Notes: -

Japanese steel merges with Italian excellence.

For this new collaboration, between Coltelleria Collini of Busto Arsizio and Fox of Maniago, we chose the Rimor model. Only 9 exclusive pieces of this excellent bushcraft knife produced by Fox of Maniago have been made, using for this edition the Japanese V-Toku2 steel in 5mm Sanmai produced by the Japanese Takefu Steel instead of the Niolox used in the standard model. 

Specifically, the central sheet is the carbonaceous V-Toku2 at 62/63HRC and on the outer cheeks there is the stainless SUS410, so as to ensure not only a beautiful aesthetic effect, but also a very high cutting capacity, penetration and edge retention along with easy resharpening and maintenance. At the same time, the blade has remarkable corrosion resistance and an important increase in resilience given by the type of extreme steel and laminated structure.

Intended Use: Survival / Utlity / Collection

Production type: Industrial
Country of manufacture: Italy
Blade: Japanese rolled steel (San Mai) with V-Toku2 (carbon) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
Blade treatment: Satin finish
Handle: Forprene
Blade length: 175mm.
Blade thickness: 6mm.
Total length: 300mm.
Weight: 365g.
Sheath: Nylon, M.O.L.E. compatible.
Packaging: cardboard box with Fox logos
Notes: -

Japanese steel merges with Italian excellence

For this new collaboration between Coltelleria Collini of Busto Arsizio and Fox of Maniago, we have chosen the Rimor model. Only 9 exclusive pieces of this excellent bushcraft knife produced by Fox of Maniago have been made, using for this edition the 5 mm Sanmai V-Toku2 steel produced by the Japanese Takefu Steel instead of the Niolox used in the standard model.

Specifically, the central plate is the carbonaceous V-Toku2 at 62/63HRC and on the outer cheeks there is the stainless SUS410, so as to guarantee not only a beautiful aesthetic effect, but also a very high cutting capacity, penetration and edge-holding capacity together with easy resharpening and maintenance. At the same time, the blade has a remarkable resistance to corrosion and an important increase in resilience due to the extreme steel type and rolled structure.

Translated with www.DeepL.com/Translator (free version)

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory sharpened, improvable
* Marks on blade: No
* Marks on handle: Slight, on nickel silver heads.
* Box: Absent
* Scabbard: Original, leather, with a few small marks due to age.
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory


Particular knife developed with the help of experienced falconers and especially Horst Niesters in the early 1970s.
The blade was designed to chop up food for raptors and to intercept game brought back by raptors during hunting trips. In the center of the blade is a small semicircular notch that serves to signal to the falconer that the edge is sharp from the tip of the blade to that exact point; the rest of the blade is kept blunt to protect the raptors.
PUMA's falconer's knife is designed to be very handy and absolutely practical, making it a reliable companion for hunting prey.


Intended Use: Collection / Vintage / Hunting

Type of production: semi-crafted
Country of manufacture: Germany
Blade: 440C stainless steel
Blade finish: satin-finished
Handle: wooden, with nickel silver guard and pommel
Blade length: 125mm.
Blade thickness: 3mm.
Total length: 242mm.
Balance: backward
Weight: 130g.
Sheath: leather
Packaging: -
Notes: Vintage 1970s knife - Withdrawn from private collection - Overall in very good condition

NOS KNIFE (New, Old Stock) WITHDRAWN FROM PRIVATE COLLECTION.
* Type: Previously Purchased.
* Condition: NOS, like new
* Commercially available Out of production.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present (full set)
* Scabbard: -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory



Intended Use: Tactical/EDC

Production Type: Industrial
Country of Production: Japan - Seki
Blade: stainless steel AUS-8 56/58HRC
Blade finish: microbead blasting
Handle: aluminum liners, Zytel grips
Blade length: 126mm.
Blade thickness: 4mm.
Length closed: 149mm.
Total length: 275mm.
Thickness when closed: 19mm.
Weight: 198g.
Closure: Arc Lock
Clip: Removable, stainless steel
Packaging: black and white cardboard case with SOG logos
Notes: knife discontinued NOS (new, old stock) new and perfect in every part

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued; Company no longer in operation as of 2017.
* Sharpening: Factory.
* Marks on blade: Normal marks, found on all Strider models with Tiger Stripe finish.
* Marks on handle: None
* Box: Originally sold unboxed
* Scabbard: Original, in Khaki-colored Cordura, by Eagle USA.
* Manuals, Certificates and Warranties:Originally sold without certificates or warranties.
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / Collection

Type of manufacture:Midtech
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade Finish: Tiger Stripe
Handle: Black G-10 with GG (Gunner Grip) pattern
Blade length: 160mm.
Blade thickness: 6.3mm.
Total length: 298mm.
Weight: 353g.
Sheath: Khaki, cordura, by Eagle USA
Packaging: -
Notes: 2010 specimen in very good condition - Shows small scuff marks on the Tiger Stripe finish, which is common with any Strider model made with this matte blade finish - Strider knives have always been offered by the company without any box, packaging, manual or certificate - This historic company ceased operations in 2017, after a 25-year career - Mick Strider, the company's previous founding partner, is still in business and dedicated solely to making custom knives.

Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.

This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.


Intended use: regional/collectible

Type of production: handcrafted
Blade: stainless damasci steel
Country of manufacture: France
Handle: raw buffalo horn
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 220mm.
Weight: 104g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available Discontinued since 2003
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, some signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: Yes
* Checked and certified by our internal laboratory

Intended use: Sporting

Type of production: industrial
Blade: ATS-55 stainless steel
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 50mm.
Blade thickness: 1.9mm.
Length closed: 70mm.
Total length: 118mm.
Weight: 36g.
Closure: Liner Lock
Clip: Removable, stainless steel
Notes: Version remained in production from approximately 1997 to 2003 - example withdrawn from a private collection, overall in very good condition.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

SERIAL NUMBER 0231

* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Limited series, discontinued
* Sharpening: Factory
* Marks on blade: Slight, uneven treatment in places (factory, not due to wear)
* Marks on handle: No
* Box: Present and original, WITH AUTOGRAPH SIGNATURE OF LYNN THOMPSON
* Scabbard: Not present
* Manuals, Certificates and Warranties: no
* Checked and certified by our in-house laboratory

Intended use: Sporting/EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel Carpenter CTS XHP Alloy 59/60HRC
Blade treatment: DLC
Handle: Griv-Ex
Blade length: 135mm.
Blade thickness: 3.6mm.
Length closed: 170mm.
Total length: 304mm.
Weight: 208g.
Closure: Back Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with Cold Steel logos
Notes: Numbered and limited edition (serial no. 0231) with signature of "Lynn C. Thompson" laser engraved on the blade and in pen on the packaging

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

* Type: Previously Purchased
* Condition: in like-new condition with perfect original box
* Commercially available Discontinued since 2013
* Sharpening: Original edge
* Marks on blade: no
* Marks on handle: no
* Box: yes
* Scabbard: no
* Manuals, Certificates and Guarantees: no
* Checked and certified by our in-house laboratory

Intended use: Sporting / Utility

Production type: Industrial
Country of manufacture: Japan
Blade: SANMAI stainless steel
Blade finish: Satin finish
Handle: Micarta and Titanium
Blade length: 115mm
Blade thickness: 4mm.
Total length: 235mm.
Weight: 152g.
Closure: Liner Lock
Clip: Stainless steel
Packaging: aluminium box with Cold Steel logos
Notes: -

For almost a decade, Cold Steel® offered a wicked-looking little boot knife called the Culloden®. It was based on the traditional Scottish 'black knife' or 'Skean Dhu' as it is more commonly called in Gaelic, the ancient language of Scotland.

The Caledonian Edge™ features a number of modern variations and refinements over its predecessor. The blade is made of a virtually unbreakable San Mai III® construction and, like the original Skean Dhu, features a thin, sharp point, as sharp as the proverbial needle. 

The traditional tang seen on the Skean Dhu of yesteryear has been retained and provides an aggressive, non-slip platform for the thumb and forefinger, allowing for better control when using the blade to cut or pierce.

The handle of the Caledonian Edge™ has a profile that hugs the palm of the hand and a relatively thin cross-section that enhances its qualities. It is flat enough not to roll or twist in the palm of the hand, yet comfortable enough to accommodate a wide range of grip styles. A perfect blend of strength and beauty, it features a mirror-polished black Micarta superstructure and titanium bolsters.ne handed opening.

Knife withdrawn from private collection. Very rare model made by Extrema Ratio with Borut Kincl ( Slovenian martial arts master and trainer of police and military special forces) no longer in production since 2009 - Overall in very good condition. Complete with cardboard box. Checked and certified by our in-house laboratory Coltelleria Collini.

Intended use: tactical/military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Blade Production: Italy
Handle: PVD
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 140mm.
Total length: 235mm.
Balance: -
Weight: 195g.
Closure: Liner Lock
Clip: reversible and removable stainless steel
Sheath: -
Notes: safety catch when knife is open

Translated with www.DeepL.com/Translator (free version)