Last up date

"Forged by the dark elves, the sword was wielded by wood elves for hundreds of years until it was given to a man, since then it is called the" Black Sword. "Feared by orcs, dwarves, men and evil beasts, the sword bearer performed many great feats until his death while slaying a great evil dragon. "

The Blacksword fantasy sword features a burnished tempered carbon steel blade.

The guard and knob are made of cast metal, while the handle is made of wood wrapped in black leather. Includes a black leather sheath.

Blade: carbon steel
Handle: leather
Knob: carbon steel
Guard: carbon steel
Sheath: leather and steel
Blade length: 80 cm.
Total length: 108cm.
Blade thickness: 5mm.
Weight: 1596 g.
Note: the blade is not sharp

Leif is believed to have been born around 970, second son of Erik the Red (Eiríkr Rauði), a Norwegian, son of Thorvald Asvaldsson, great grandson of Naddoddr, the discoverer of Iceland. His mother was Þjoðhildur. His father had founded two Viking colonies, the Western Settlement and the Eastern Settlement, in Greenland, a land to which he himself had given its name.

High carbon steel blade, robust and well white. The pommel and guard are richly carved and decorated with sea dragons and intertwined knots. The wooden handle is covered in black leather and features three knotted rings. The sword comes with a black leather scabbard with decorations and a leather belt.

Blade: 1065 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 74.5cm.
Blade thickness: 4mm.
Weight with scabbard: 1535g.
Sheath: leather with bronze mounts
Notes: the blade is not sharp

This extraordinary medieval dagger is the ideal companion for the Accolade sword.
The carbon steel blade has stamped the seal of the Knights Templar, while the knob has an inlaid cross.
Beautiful leather sheath.
Blade: carbon steel
Handle: brown leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather
Blade length: 260mm.
Handle length: 100mm.
Total length: 420mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 565g.
Weight with sheath: 713g.

Robert I Bruce was king of Scotland from 1306 to 1329. Of Norman and Scottish Gaelic ancestry, he was one of the greatest kings of Scotland, and also one of the most famous warriors of his era. He led Scotland against the Kingdom of England during the Scottish Independence Wars.
He was the great-grandson of David I of Scotland and was often at odds with the Scottish hero William Wallace.

Sword characteristics:

- Total length: 110 cm
- Blade length: 92 cm
- Blade: in High Carbon Steel
- Handle: metal and leather
- Weight: 1.35 kg
- Thickness: 4 mm
- Accessories: sheath and belt in
- Blocking: 13cm from the guard branch

The Scottish dirk (also called highland dirk, in Scottish Gaelic, biodag) is a traditional and ceremonial side dagger of Scottish Highland regiment officials and possibly derived from the sixteenth century ballock.

The traditional Scottish dirk spread particularly in the second half of the seventeenth century, when it was used among the military during the Jacobite insurrection.

Production: artisan
Blade: carbon steel
Handle: wood
Knob: steel
Guard: steel
Sheath: leather and steel
Blade length: 29cm.
Total Length: 42.5cm.
Blade width: 35mm.
Blade thickness: 4mm.
Weight: 328g.
Balancing: -

Faithful reproduction of the Roman sword produced by Windlass

Blade: 1095 carbon steel
Handle: in wood and bronze
Blade length: 50cm.
Total Length: 71cm.
Blade thickness: 1.5mm.
Balancing: advanced
Weight: 765g.
Sheath: in leather, hand-sewn, with bronze finishes
Notes: balanced, perfect for exposition or historical re-enactment

Reproduction of an Italian dagger of the 14th / 15th century.

The shaped handle and the fishtail pommel, combined with an elegant guard, give it a regal appearance. The long blade has a central reinforcement rib that allows it to support heavy lunges. Excellent overall balance and handling speed.

Steel blade with high carbon content, through tang. Guard and knob in nickel-plated metal.

Blade: carbon steel - NOT SHARP
Handle: brown leather
Knob: carbon steel
Guard: nickel-plated metal
Sheath: brown leather and steel
Blade length: 338mm.
Handle Length: 165mm.
Total Length: 502mm.
Blade width: 30mm.
Blade thickness: 6.7mm.
Weight: 464g.
Weight with Sheath: 552g.

The Sgian Dubh is a ceremonial dagger knife (in sgian Gaelic) worn as part of the modern Scottish Highland dress, along with the kilt.
It is worn tucked into socks, with only the knob visible.

Intended use: sports / collection

Type of production: artisanal
Country of production: India
Blade: 1055 carbon steel
Blade treatment: -
Handle: in engraved wood with fittings
Blade length: 82mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 46g.
Sheath: in wood and leather
Packaging: -
Note: -

Intended use: sports / collection / hunting

Type of production: Semi-Industrial
Lama production: India
Blade: 1065 carbon steel
Handle: brown wood
Blade length: 300mm.
Blade thickness: 4.5mm.
Total length: 465mm.
Balancing: 5 cm advanced
Weight: 542g.
Sheath: in brown leather
Packaging: cardboard box

Reproduction of the Italian Renaissance dagger potentially worn on the belt by Lorenzo de 'Medici. Said Lorenzo the Magnificent (Florence, 1 January 1449 - Careggi, 8 April 1492), he was lord of Florence from 1469 to his death, the third of the Medici dynasty. He was also a writer, patron, poet and humanist, as well as one of the most significant politicians of the Renaissance, both for having incarnated the ideal of the humanist prince, and for the very careful management of power.

The cut-free dagger on both sides is made of carbon steel, with precise and accurate workmanship and leather finishes. The hilt and the knob are in steel and the handle is covered in soft black leather. Comes with a leather sheath and steel fittings.

Blade: carbon steel
Handle: black leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 280mm.
Handle Length: 95mm.
Total Length: 415mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 448g
Weight with Sheath: 542g.

Although iron was a tougher material than bronze it would frequently bend. Damascus, or pattern welded steel, was used to make the blade strong enough to withstand the rigors of combat. Early Viking swords were forged from layers of iron interwoven with strands of steel to produce a very tough sword. This sword is based on an original circa 850-900 AD sword discovered in Finland. The Damascus Viking Sword is made of high carbon Damascus steel. The blade is polished with the fuller acid etched to bring out the beautiful Damascus pattern. The pommel and crossguard are made of solid steel and the grip is leather wrapped wood. Includes a matching wood scabbard with a black leather covering and steel mounts. A very nice example of a true Viking sword.

Blade: 1070 carbon steel damask battle ready
Handle: in leather and metal
Total length: 91.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard 1304g.
Weight with no sheath 938g.
Sheath: wood covered with leather with metal fittings
Note: -

Blade: 1050 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard: 1404g.
Sheath: leather with bronze fittings
Note: -

Non Nobis, Domine, Non Nobis, Sed Nomini Tuo Da Glorium
These iconic words engraved on the blade define this historic sword replica. The creed of the Knights Templar - Nothing for us, Lord, nothing for us but for the glory of thy name - marked their illustrious and sometimes infamous 200 year military influence.
This magnificent sword named The Accolade would have been a sword worthy of the Grand Master to knight a loyal member into this holy order. The best metalsmiths from Windlass Steelcrafts have spent hours on each blade, hand forging the high carbon steel for optimal balance, quickness and durability.
The pommel features a highly detailed Templar coin on each side with Latin inscription and the symbols that have grown synonomous with the Templar Order, while the grip is hand-wrapped with a rich genuine red leather with a wire over-wrap. The sword includes a custom, matching wooden scabbard covered in top grain, heavy-duty leather and a period belt with solid metal fittings.

- Overall length: 101,5cm
- Blade length: 82cm
- Width of the blade: 5.8 cm
- Weight: 1640 gr
- Blanciatura: 13cm from the guard branch
- Accessories: scabbard and leather belt

- Battle Sword in a hand 501000 - battle ready

Blade: carbon steel and WIRE WITH BULLET TIP 3 MM suitable for battle ready
Handle: Leather
Knob: carbon steel
Guard: carbon steel
Sheath: Leather & Steel
Blade length: 82cm.
Total Length: 100cm.
Blade width: 50mm.
Blade Thickness: 3mm.
Weight: 1122g.
Balance: 14cm. by guard branch

We are glad to offer our new line of blunt swords and rapiers developed for the rigors of mock combat.

Each blade is built to withstand a lot of use by reenactors or stage performers.

Full tang sword forged of high carbon steel 1095, fully tempered.

The edges and points are 3/16" thick and rounded over for better nick resistance.

Wood grips covered with leather and other authentic materials.

All come with scabbards.

Museum Replicas Windlass - One Hand Battle Sword - 501002 - battle ready

Blade: made of carbon steel, dull, battle ready
Handle: Leather
Knob: carbon steel
Guard: carbon steel
Sheath: Leather & Steel
Blade length: 82cm.
Total Length: 100cm.
Blade width: 50mm.
Blade Thickness: 3mm.
Weight: 1140G.
Balance: 13cm. by guard branch

Museum Replicas Windlass - Gladiator - Tigris Axe 880011

From the classic movie Gladiator comes the Axe of Tigris. Features all steel and brass construction with a high carbon steel blade. Includes wall plaque. Made by Windlass Steelcrafts.

Blade: Carbon Steel 1095
Handle: Steel
Blade length: 25cm.
Total length: 75 cm.
Blade Thickness: 5mm.

Weight: 2014g.
wooden display support

© 2010 DW Studios LLC. All Rights Reserved.

Museum Replicas Windlass - Sword of the Knights of Malta - Craft Sword

Characteristics:

The blade is made of carbon steel with handle in leather.

Guard and pommel are made of steel.

Sheath, including the sword, a leather belt with.

- Overall length: 103cm

- Length of the blade: 86,5cm

- Blade width: 4.8 cm

- Weight: 1260 gr

Museum Replicas Windlass - Sword of Tancred - Craft Sword

Characteristics:

The blade is made of carbon steel with handle in leather.
Steel guard and pommel.
Sheath, including the sword, a leather belt with.

- Overall length: 102,5cm
- Blade length: 84cm
- Blade width: 5 cm
- Weight: 1630 gr

Faithful reproduction of the sword of Marcus Aquila, produced by Windlass and from the movie "The Eagle", the epic film of 2011 with Channing Tatum and film adaptation of the novel "The Eagle of the Ninth Legion" by Rosemary Sutcliff.

Blade steel: 1095 Carbon blunt
Handle: wood and bronze
Blade length: 50.3cm.
Total length: 70cm.
Blade thickness: 1.5mm.
Balancing: Advanced
Weight: 815g.
Sheath: leather, hand-sewn, finished in bronze
Notes: Manufactured under license film official Universal Studios

Museum Replicas Windlass - Left Hand Deschaux Dagger - Dagger craft

Blade: steel with high carbon content
Handle: Bone
Knob: Carbon Steel
Guard: carbon steel
Sheath: Black leather and steel
Blade Length: 305mm.
Overall Length: 455mm.
Blade Thickness: 3.5 mm.
Weight: 462.
Weight with Sheath: 558g.
Balancing: the guard
Sheath: Leather

È formato da un manico in legno che culmina in una testa. Quest'ultima ha una protuberanza su 5 lati: era in grado di forare una corazza come altre armi dello stesso genere, le mazze. Impugnatura: Legno rinforzato in acciaio
Testa: Acciaio al carbonio
Lunghezza Totale: 680mm.
Lunghezza Martello: 130mm.
Spessore Impugnatura: 30x30mm.
Spessore Testa: 33x33mm.
Peso: 1136g.

Corpo e Testa: acciaio al carbonio, brunito
Impugnatura: cuoio nero
Dimensioni Testa: 75x75 mm.
Lunghezza Impugnatura: 200 mm.
Lunghezza Totale: 600 mm.
Spessore Corpo: 20 mm.
Peso: 792 g.

Scudo prodotto dalla Windlass, tratto dal film di 300.

Materiali: lo scudo è fatto in acciaio con rivestimento placcato in rame.
La parte interna è rivestita in gommapiuma e munita di cinghie di cuoio per il trasporto.

Dimensioni: 94 cm
Peso: 9 kg

Reproduction, made by Windlass, of the William Wallace's sword, used by Mel Gibson in the BraveHeart movie.

Total length: 154.5 cm
Blade length: 120 cm - NOT WRENCHED
Steel: High carbon content (it is recommended to periodically maintain oil to avoid oxidation)
Blade thickness: 4.4 mm
Weight: 2.98 kg

The handle (25.5 cm) and the first part of the blade are covered in leather.

One-handed classic medieval sword that contains all the characteristics of the 1300s blades.

Blade: high carbon steel
Handle: black leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 84cm.
Total length: 100cm.
Blade thickness: 4mm.
Weight: 1445g.
Weight with scabbard: 1870g.
Balance: Advanced to 13.5cm.

Scudo tondo popolare tra il 13esimo ed il 17esimo secolo. Questo tipo di scudo era preferito da molti soldati a quelli più grandi perchè conferiva maggior rapidità di movimento pur sacrificando un poco di copertura.

Realizzato interamente in acciaio al carbonio, ha un diametro di 59cm. doppia impugnatura in cuoio e peso di circa 2500g.

Elmo indossabile in acciaio lavorato a mano che riproduce fedelmente quello utilizzato da Russel Crowe ne "Il Gladiatore"

Ottima qualità e livello costruttivo

Incluso supporto in legno espositivo

300 è un film del 2007 diretto da Zack Snyder con il supporto di Frank Miller, adattamento cinematografico del graphic novel 300; quest'ultimo è stato a sua volta ispirato a un altro film, The 300 Spartans, un racconto semi-storico della battaglia delle Termopili svoltasi nel 480 a.C.

Il film è stato girato con la tecnica del chroma key per riprodurre le immagini dell'originale fumetto. È uscito nelle sale negli USA il 9 marzo 2007, mentre in Italia il 23 marzo 2007.

Robusto e indossabile elmo utilizzato dai guerrieri spartani
Replica tratta dal film di "300"

Materiali: acciaio placcato bronzo anticato con allacciature in cuoio

Replica della spada n. IV-1787 presente nella Reale Armeria d'Inghilterra.
Ben bilanciata e relativamente leggera, consente un brandeggio abbastanza rapido nonostante l'indubbia imponenza.
Lama: in acciaio al carbonio - non affilata
Lunghezza lama: 111.5cm.
Spessore lama: max 4.6mm.
Lunghezza Totale: 145.5cm.
Peso: 2050g.
Bilanciamento:9 cm dalla guardia

Blade: 1095 carbon steel
Handle: faux ivory
Blade length: 50cm
Total Length: 69cm
Handle Length: 9.3cm <br Blade Width: 5.5cm
Blade thickness: 4mm
Balancing: advanced, at 11cm. from the guard
Weight: 720g
Weight with scabbard: 1118g
Sheath: wood, leather and bronze

One-handed sword used by the ancient Greeks.
It was the primary weapon in the battlefield for the Greek armies along with the spear or javelin.
The blade was about two feet long.
The xiphos were good for both cutting and tip attacks thanks to the leaf shape of the blade.
It was generally used only when the spear was abandoned. The straight, double-edged design of the xiphos gave them the same general versatility found in swords used by infantry until firearms displaced the sword on the battlefield.
Its design lent itself to cutting and pushing.

Blade: high carbon steel
Handle: black leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 560mm.
Total length: 720mm.
Blade thickness: 3mm.
Weight: 960g.
Weight with Sheath: 1350g.
Balance: 8 cm from the guard
Sheath: in wood and leather

This splendid battle ready sword stands out for the black finishes of the blade, pommel and guard and is a perfect example of a bastard sword: compact blade and elongated handle so that you can use a second hand in support but can also use the sword in one hand. thanks to its weight and small size.

Blade: carbon steel
Handle: leather
Knob: carbon steel
Guard: carbon steel
Sheath: leather and steel
Blade length: 86cm.
Total length: 105cm.
Blade width: 45mm.
Blade thickness: 5mm.
Weight: 1580g.
Balancing: -

sword withdrawn from a private collection - In excellent condition, only the blade has a scratch following the removal of an engraving (visible in the attached photos)

Checked and certified by our internal Coltelleria Collini laboratory.

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased and Used
* Condition: Excellent condition
* Marks on blade: YES
* Marks on handle: NO
* Box: Present
* Scabbard:  Scabbard
* Manuals, Certificates and Warranties: Yes
* Checked and Certified by our internal laboratory

This splendid battle ready sword stands out for the black finishes of the blade, pommel and guard and is a perfect example of a bastard sword: compact blade and elongated handle so you can use a second hand as support while still being able to use the sword with one hand thanks to its weight and small dimensions.

Blade: carbon steel
Handle: leather
Knob: carbon steel
Guard: carbon steel
Sheath: leather and steel
Blade length: 86cm.
Total Length: 105cm.
Blade Width: 45mm.
Blade thickness: 5mm.
Weight: 1580g.
Balancing: -

This replica, built with methodologies and principles very similar to those used in the Middle Ages, is aesthetically detailed and well finished like any display product but also absolutely functional, flexible and well balanced thanks to the production care and the carbon steel used tempered to a hardness 45/49 HRC.

Known by many names (war sword, great sword, broadsword, long sword or simply two-handed sword) it has long confused many collectors but has certainly carved out a place among the most popular weapons.Its length ensures power, resistance and helps to keep a reasonable distance from the opponent. Thanks also to the presence of the ricasso (part of the blade without a cutting edge placed after the guard) this weapon is even more flexible as if necessary it can also be held as a short spear.

The blade is made of carbon steel with a wooden handle woven with leather.

Guard and knob are made of steel.

The scabbard, included with the sword, is in leather.

Total length: 125cm

Blade length: 96cm

Blade width: 8 cm

Weight: 1.35 kg

Blade: 1095 carbon steel
Handle: metal
Blade length: 33.5cm
Total Length: 49cm
Handle Length: 15.5cm
Blade width: 4cm
Blade thickness: 4mm
Balance: advanced, at 3.5cm. by the guard
Weight: 492g
Weight with sheath: 655g
Sheath: black leather and steel

This reproduction of lakonia, directly copied from the book "the spartan army", was the main weapon of the Spartan army, known for its cruelty and ardor in battle.

The blade is handcrafted in high carbon steel while the handle is completely made of bronze. The sword is also accompanied by a wooden scabbard covered with hand-stitched brown leather with bronze studs.

Type of production: Artisan
Blade: carbon steel
Handle: bronze
Blade length: 360mm.
Blade thickness: 4.5mm.
Total length: 500mm.
Balancing: advanced, to 1cm.
Weight: 895g.
Sheath: Brown Leather

Blade: carbon steel
Handle: wood and leather
Knob: aluminum alloy
Guard: aluminum alloy
Sheath: -
Blade length: 91cm.
Handle Length: 15cm.
Total Length: 114cm.
Blade width: 50mm.
Blade thickness: 3mm.
Weight: 1360g.
Weight with Sheath: -
Balancing: Advanced to 9cm.
Support: Painted wooden wall plate

Replica ufficiale dietro licenza ufficiale Universal Pictures, della spada di Robin Hood diretto da Ridley Scott.

Lama: Acciaio al carbonio 1050 battle ready
Impugnatura: in metallo e legno
Lunghezza Lama: 89cm.
Lunghezza Totale: 101,5cm.
Spessore Lama: 4mm.
Peso: 1890g.
Fodero: non compreso.

Blade: carbon steel WITH ARROUNDED POINT and 4 MM THREAD suitable for battle ready
Grip: leather
Pommel: Carbon steel
Guard: carbon steel
Scabbard: leather and steel
Blade length: 99cm.
Total length: 127.5cm.
Blade width: 50mm.
Blade thickness: 5mm.
Weight: 1840g.
Balance: 11cm.

Spada a una mano e mezza dall'ottima bilanciatura. Finitura bronzea su pomo, guardia e particolari in metallo del fodero.

Lama: in acciaio ad alto tenore di carboniopriva di filo
Lunghezza totale: 113 cm.
Lunghezza lama: 90,5 cm.
Spessore lama all’elsa: 4 mm.
Spessore lama alla punta: 3 mm.
Bilanciatura: avanzata a 12,5 cm dall’elsa.
Lunghezza impugnatura: 21 cm. (15,4 cm. la parte con copertura in cuoio)
Lunghezza elsa: 21 cm.
Peso spada: 1.140g.
Peso con fodero: 1.440g.
Fodero: pelle nera e acciaio
Impugnatura: pelle nera
Note: utilizzabile per praticare forme o per contatti leggeri/medi

This kind of battle ready sword was common throughout Europe during the Middle Ages. Structured to be easily used with one hand, it still allows a second hand in support to give more power.

Blade: carbon steel
Handle: in wood, wire and dried casing
Knob: carbon steel
Guard: carbon steel
Sheath: leather
Blade length: 91cm.
Total length: 113cm.
Blade width: 50mm.
Blade thickness: 5mm.
Weight: 1360g.
Weight with Sheath: -

Around 1450, the long sword, often called "one-and-a-half", was widely used in war, but it was also often a weapon of self-defense for civilians. Coupled to a dagger it was excellent against thieves, brigands and assassins, often organized into gangs that roamed the countryside.

Equipped with a good tip and adequate length, it allowed opponents to be kept at a distance. Its average weight allowed it to be used easily with one hand, in combination with the dagger in the other. Moreover, thanks to the length of the handle, it could be used with both hands to have greater control and perform very powerful cuts.

Blade: carbon steel - NOT SHARP
Handle: black leather and wire
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 90cm.
Handle Length: 24cm. (including knob)
Total Length: 115cm.
Blade width: 45mm.
Blade thickness: 4mm.
Weight: 1514g.
Weight with Sheath: 1800g.
Balance: advanced to 13cm.

This battle ready sword, faithfully reproduces the sword of Sparta used in the 300 and 300 Rise of an Empire movies.

Blade: 1050 battle ready carbon steel
Handle: Burnished steel and finely stitched leather
Blade length: 65cm.
Total length: 76.50cm.
Blade thickness: 3mm.
Balance: advanced, at 7cm. from the guard branch
Weight: 1250g.
Sheath: in leather

Faithful reproduction of the helmet used by King Leonidas in the film "300".

Manufacturer: Windlass.

The helmet, wearable, is made of steel with a bronze-effect plating, leather lining, synthetic crest. Equipped with exhibition support.

Dimensions: about 30 x 45 x 20 cm, crest included.

Windlass - Inglese War Hammer - warhammer

This war hammer of 1530 was usually wielded by knights thanks to its ability to pierce any armor or shield and crush any helmet.

Handle: Wood reinforced with steel handle covered with leather
Head: Carbon Steel
Overall Length: 640mm.
Hammer Length: 170mm.
Handle thickness: 30x20mm.
Head thickness: 22x22mm.
Weight: 706g.

Faithful reproduction produced by Windlass, of the sword taken from the movie "The Gladiator", epic film of 2000, directed by Ridley Scott and starring Russell Crowe.

Exhibition product

Blade: Carbon steel
Handle: in synthetic material, wood and bronze
Blade length: 75cm.
Total Length: 97cm.
Blade thickness: 3mm.
Balancing: advanced, at 3cm. from the guard branch
Sheath: in wood and leather with brass fittings
Weight: 1450g.