Bowie knives originated in the United States in the early 19th century and were considered reliable work knives, even occasionally used in combat. Typical of these fixed knives is the massive blade, with a characteristic design, usually more than 15 cm long and with a guard to protect the hand.

As a variant suitable for everyday use, the Chuck Gedraitis Boker Plus Pocket Bowie combines the fascination of the Bowie knife with the flexibility and compactness of a pocket knife. Equipped with a satin-finished Bowie blade made of D2, the three-finger knife easily copes with all day-to-day tasks.

The knife opens via the pull-out thumb stud, while the stainless steel linerlock reliably locks the blade in place.

The ergonomic handle with brown Burlap micarta scales promises a secure grip and gives the knife a touch of the Wild West.

The clip is beautifully integrated into the rear handle and allows tip-up carrying.

Supplied with a high quality nylon case.

Intended use: Hunting / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: D2 58HRC steel
Blade finish: Satin
Handle: micarta
Blade length: 70mm.
Blade thickness: 3mm.
Total length: 158mm.
Weight: 78g.
Sheath: clip
Packaging: cardboard box with Boker logos and nylon case
Note: -

Whether in the home hearth, hunting lodge, garden, forestry maintenance, scout camp or bushcraft camp, the axe, one of mankind's oldest tools, is still an indispensable item for many activities. Some outdoor enthusiasts even prefer the axe to the knife.

Boker Plus Appalachian axes feature a Rhine-shaped axe head made of 1055 carbon steel, a choice that represents an above-average carbon content and material standard even for quality axes. The universal blade thickness is suitable for both felling and splitting. The lower tip (heel) of the 10.7-cm-long cutting edge can be used as a turning point for wood pieces. The steel is protected from rust by a protective lacquer. A versatile weight of 600g was chosen for the heads of both axes. The best American long-fiber walnut, far superior to European ash for breaking elasticity and impact resistance, was used for the handles. The handles are attached to the head with wooden wedge and steel sleeve. The two models Appalachian Big and Appalchian Small differ in the length of the handles.

Intended Use: Hiking/Sporting

Type of production: Industrial
Country of manufacture: Taiwan
Blade: 1055 carbon steel
Blade treatment: /
Handle: Hickory wood (American Walnut)
Blade length: 10.50cm.
Blade thickness: 2cm.
Total length: 35.5cm.
Weight: 800g. + 91g (scabbard)
Sheath: leather blade cover 09BO257 specially made for the Appalachian series
Packaging: exposed
Notes: -

Whether in the home hearth, hunting lodge, garden, forestry maintenance, scout camp or bushcraft camp, the axe, one of mankind's oldest tools, is still an indispensable item for many activities. Some outdoor enthusiasts even prefer the axe to the knife.

Boker Plus Appalachian axes feature a Rhine-shaped axe head made of 1055 carbon steel, a choice that represents an above-average carbon content and material standard even for quality axes. The universal blade thickness is suitable for both felling and splitting. The lower tip (heel) of the 10.7-cm-long cutting edge can be used as a turning point for wood pieces. The steel is protected from rust by a protective lacquer. A versatile weight of 600g was chosen for the heads of both axes. The best American long-fiber walnut, far superior to European ash for breaking elasticity and impact resistance, was used for the handles. The handles are attached to the head with wooden wedge and steel sleeve. The two models Appalachian Big and Appalchian Small differ in the length of the handles.

Intended Use: Hiking/Sporting

Type of production: Industrial
Country of manufacture: Taiwan
Blade: 1055 carbon steel
Blade treatment: /
Handle: Hickory wood (American Walnut)
Blade length: 10.50cm.
Blade thickness: 2cm.
Total length: 60cm.
Weight: 873g. + 91g (scabbard)
Sheath: leather blade cover 09BO257 specially made for the Appalachian series
Packaging: exposed
Notes: -

AdHoc - FORMA Porcelain salt and pepper mill set - VINTAGE 

Porcelain grinder for pepper and salt

Also suitable for other dried flavourings

Refill very easy: just remove the top

Very efficient ceramic grinder 

Progressive adjustment of the thickness of the grindstone from fine to coarse

Material: Porcelain

Height: 14cm.

AdHoc - Acrylic/ Wood salt-pepper mill set

AD-HOC

Spice mill using the cerastar ceramic article allows for optimal grinding results. The ad-hoc pepper grinders are all equipped with a self-locking safety screw for adjusting the thickness of the grinder.

Thanks to the locking of the grinder, you will avoid having remnants of the grind on the supporting surface. You can grind the following dried substances: black pepper, coarse salt, comino, garlic, rosemary, oregano, various spices, mustard grains, anise, coriander, cloves and chocolate.

Features: Pepper mill or salt mill , supplied with a high quality ceramic grinder "CeraCut", which is odorless, tasteless, stainless and absolutely corrosion resistant, with continuous grinding adjustment from fine to coarse.

Dimensions cm. 13

Artero - Japanese quality made in Spain.
Founded in Manresa, near Barcelona, Artero is an important Spanish company that has been handed down from generation to generation by the family of the same name.

Over the years, Artero has developed an extraordinary expertise, unique in Europe, in Japanese steel workmanship, which together with the special aesthetic taste and strong attention to the fashion content of the product, give its cutting tools an exceptional performance and great appeal for professional user.

Artero - ONE DARK 30 D 6" Thinning Scissors - T70560

Features:

- 440C alloy steel coated with black titanium.
- V-shaped teeth: 30 (carving blade).
- Deling: 25%.
- Ergonomic style.
- Razor blade (carving blade).
- Concave blades.
- Forged finger rest.
- Adjustable screw.
- 57HRc hardness.
- Size: 6"

ntended Use: Tactical / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Teflon coated
Handle: Aluminium
Blade length: 120mm.
Blade thickness: 3.5mm.
Total length: 250mm.
Weight: 202g.
Clip: Stainless steel, removable and reversible
Closure: liner lock
Packaging: cardboard box with Kalashnikov logos
Notes: -

Intended Use: Outdoor / Bushcraft / Light Utility

Production type: Industrial
Country of Production: Taiwan
Blade: hidden tang made of Sandvik 12C27 stainless steel
Blade Finish: Titanium coating
Handle: Injection molded polymers (brown TPR and black GRP)
Blade length: 115mm.
Blade thickness: 4.2mm.
Total length: 242mm.
Weight: 210g.
Sheath: polymer and Nylon
Packaging: cardboard box with Boker Plus logos
Notes: -

Microplane - Dual Blade Grater- Coarse and Fine

Product Description/Characteristics:

Dual Blade Grater with two grating sides- Fine & Coarse blade

Ultra-sharp, photo-etched, stainless-steel blade

Made in USA

Effortless grating for superior results

Foods are precisely cut without ripping or tearing

The natural aroma is released to enhance flavour

Space saving & compact, but enough surface for grating

Ergonomic soft touch- handle for comfort

Non-slip rubber feet for stability and flexibility whilst grating

Convenient cleaning: Simply rinse under running water and allow to drip dry -Also dishwasher safe

Easy storage: reusable protective cover (not dishwasher safe)

Measurements: 31 cm x 11 cm x 3 cm

Exact grating surface: 14 cm x 9.5 cm

Fine or coarse - that is the question here? When food is grated, it is usually needs to be grated either very finely or finely. With the new double blade grater, both blade variants are always at hand.

The fine blade is ideal for grating citrus fruits or grating various hard spices such as nutmeg, cinnamon, tonka bean, but also Parmesan and hard cheese, as well as ingredients such as chocolate to refine or decorate desserts or drinks. The blade provides a very fine result, which also highlights the flavour. Tip: This blade can also be used to grate ginger, garlic or chili peppers to achieve a very fine but puree-like consistency.

The coarse blade can be used to grate various foods more coarsely than the fine blade without tearing them. Chocolate, coconut or nuts for desserts, onion, shallots or ginger for cooking, all kinds of vegetables and fruits (e.g., carrots, potatoes, or apples) for preparing baby mush or to get more consistency during preparation.

The Dual blade grater is space-saving and compact but offers enough surface for grating.

Intended Use: Tactical / Heavy Duty

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Black Powder Coating
Handle: made of Griv-Ex polymer, with steel pommel
Blade length: 267mm.
Blade thickness: 5mm.
Total length: 387mm.
Balance: Advanced
Weight: 474g.
Sheath: Secure-Ex ABS
Packaging: Cardboard box with Cold Steel logos
Notes: -

Surgical precision, a clean cut, and a sense of pride in what you've achieved: the Böker Plus scalpel knife by Alexander Krava provides the dexterity needed for everyday, delicate cutting tasks. The compact all-steel construction in D2 is modeled on a scalpel but convinces as an absolutely practical neck knife.

The bulbous blade has a satin finish and cuts through cardboard boxes with equal concentration and effortlessness, and steps in for crafts where scissors can go no further. Epoxy handle inserts and serrations on the wrist rest increase control while working. Supplied with a black ball chain and custom-made Kydex sheath.

Intended Use: Tactical / CQB 

Production type: Industrial
Country of manufacture: Taiwan
Blade: D2 steel
Blade treatment: Stone Washed
Handle: D2 steel
Blade length: 42mm.
Blade thickness: 2.6mm.
Total length: 125mm.
Balance: -
Weight: 14g.
Sheath: Neck, in Kydex
Packaging: Cardboard box with Boker Plus logos
Notes: Design Alexander Krava

The LR40 is designed with retro style, which can be used as a camping lantern, ambient light, auxiliary light or decorative light.

The LR40 is available with 3 light sources to produce 360° omni-directional lighting with a maximum output of 100 lumens. In addition to the natural white light, it can also offer the warm light provided by the tungsten filament LED, while the SOS red light can be activated to alert rescuers in an emergency.

The knob switch can be used to turn on/off the light and adjust the brightness steplessly. Built-in 4,000mAh Li-ion battery, it can provide a maximum working time of 65 hours, a night companion for 8 nights. Available with USB-C input and USB-A output, it can be used as a power supply.

In addition, there are multiple ways to use the LR40: place it, hold it or hang it in the tent while the handle features a convex design for more stable hanging. Furthermore, the LR40 has a premium and reliable construction. The ABS plastic housing is durable and impact resistant.

Hot light
Min: 15 lumens - 45 hours
Max: 80 lumens - 15 hours

White light
Min: 15 lumens - 38 hours
Max: 50 lumens - 10 hours

Warm + white light
Min: 10 lumens - 65 hours
Max: 100 lumens - 8 hours

Red light (SOS flashing signal)
10 lumens

Dimensions
Height: 117mm / 4.61"
Width: 96mm / 3.78"
Weight: 222 grams / 7.83 oz
Construction Material: APS Plastic and metal
Switch: Rotating dial above the light
Features Rechargeable: yes
Special Modes: Red SOS
Maximum output: 100 lumens
Battery Included: Built-in Li-ion

Heiniger Saphir Basic Cordless 35W - Small Animal Clipper - with one battery

The Heiniger Saphir Basic is a professional cordless dog and cat clipper with a #10 blade and one rechargeable battery.

Basic version of the popular cordless clipper Heiniger Saphir, comes with one rechargeable battery and a smaller charging station.

Completely maintenance-free, i.e. it does not require oiling of any internal components. With impact resistant housing and ergonomic design. Very light and perfectly balanced, fits well in the hand, easy to use. Locked switch prevents from accidental enabling. Fitted with no. 10 blade (cutting length 1.5 mm), heavy-duty steel made.

Built-in battery level LED indicator enable to check the remaining battery time. Using special electronic technology the battery has no "memory effect", so it can be recharged at any time.

Among the professionals, this model is considered as the best cordless clipper. This model is ideal for anyone who does not like restrictions arising from the length of the power cord. Especially recommend it for grooming salons, exhibitions and shows, veterinary surgeries, client visits, etc.

Features:

Swiss made

Lightweight construction

Ergonomic design

Powerful lithium-ion battery (60min of continuous work, fully charged in 45min.).

Clipper and charger stand

Specification:

Motor: 35W

Speed: 2650 dbs/min

Dimensions

LxWxH: 204 x 50 x 41 mm

Weight incl. battery: 425g

Battery voltage: 7,4V.

Romertopf - Cob - Terracotta Oven Cob Cooker.

• Cook delicious cob and prepare unique dishes.
• Healthy cooking.Perfect baking in the oven in 30-40 minutes at 180 degrees.
• Rediscover the healthy way of cooking, enjoy modern, light and healthy cooking.
• Natural cooking that preserves vitamins as well as ease of use.
• made of terracotta.
• Dimensions: 25x8cm.

The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.

This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.

The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration. 

The back spring (with the Maltese cross symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme. 

Intended use: Regional/Collection

Type of production: artisanal
Blade: Stainless steel 12C27
Blade production: France
Handle: Blond cow horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -

Zwilling - Hand Blender - Hand Blender - Enfinigy Line

One blender, one blending jug, endless possibilities.

The ZWILLING ENFINIGY hand blender with measuring jug is convenient, practical and versatile for many different preparations, whether smoothies, sauces or homogenised food.

Thanks to the powerful 800 watt motor and its 9 speeds, the minipimer always has the right setting to make every preparation perfect.

The sharp, finned ZWILLING blade with pirahna serration ensures perfect mixing results. -

The 600 ml measuring jug is BPA-free and has a lid that is compatible with ZWILLING FRESH & SAVE. 

In this way, sauces can be prepared in advance, vacuum-packed and then enjoyed fresh at a later date.

Other exclusive advantages of the immersion orchard blender are: the soft-start function to reduce splashing, the intuitive 2-button control and the 1.2 metre cable for convenient operation while cooking.

Powerful 800 watt high-performance motor for perfect blending 9 different adjustable speeds (6,500 - 13,000 RPM), including pulse function ZWILLING finned blade with Piranha serration for exceptional chopping of ingredients.

Sturdy blade made of high-quality stainless steel

600 ml, BFA-free, airtight lid for proper storage of preparations

1.2 m das power cord for convenient use

Cotton bag included for convenient storage of the immersion blender after each use

Plastic free packaging.

Features Colour: white-black-steel

Material: ABS

Number of parts: 1

Voltage: 220-240 V

Frequency: 50/60 Hz

Safety lock: Yes

Motor type: DC Motor

Programs: 1

Blade type: Wing blade

Speed settings:

9 Power input: 800 W

Net weight: 1.20 kg

Design: Matteo Thun & Antonio Rodriguez.

The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.

This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.

The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration. 

The back spring (with the Pilgrim's shell symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme. 

The blade uses 67-layer Japanese VG10 rolled steel, manufactured by Takefu Steel.

Intended use: Regional/Collection

Type of production: artisanal
Blade: Damascus and Japanese VG10 rolled steel
Blade production: France
Handle: Blond Cowhorn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -

Commuter Backpack
The Nitecore BP16 is the backpack for going anywhere and doing anything. Designed for the modern man on the move, the BP16 combines ample interior space with a lightweight and comfortable construction. This backpack can be carried over the shoulder or stored as a convenient carry-on when travelling. Made of durable 500D polyester, this backpack is perfect for any adventure, regardless of the weather. Multiple pockets will keep you organised, including a handy insulated compartment for a snack or drink. An excellent choice for school, commuting or outdoor trekking.

Features
" High-strength 500D polyester fabric
"16 litre large capacity main compartment
" Can hold laptops up to 14 inches long
" Spring strap system for modular extensions
"Multifunctional interior compartments
"Insulated compartment for food or snacks
" Breathable shoulder straps for superior comfort

Measurements

- Number of closable pockets: 5
- Height: 14Cm
- Length: 46Cm
- Weight: 815g
- Width: 29Cm

This handmade Finnish hunting and outdoor knife is an exclusive version of the classic "Hunting" model and has a unique reindeer horn shape and decoration.

It was originally developed as a knife for moose hunters in Finland and quickly became the perfect companion for working larger game such as moose, wild boar and deer. The design and profile of the blade are excellent for skinning game.

The blade is made of UHC (Ultra High Carbon) steel and the handle decorated with reindeer antlers is curly birch, stained and coated with linseed oil, which ensures a firm grip, even when wet. UHC steel makes the knife extremely sharp for a long time.

Comes with a handcrafted sheath of dark vegetable tanned Finnish leather in combination with stained curly birch, for a unique look. Made, sharpened in collaboration with knife maker Kari Ohtonen.

Intended use: Hunting/Sports/Collection

Type of production: artisanal
Blade: in UHC 62/63HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 235mm.
Balancing: -
Weight: 130g.
Closure: -
Clips: -
Sheath: Vegetable tanned leather with reindeer antlers
Note: -

This new Finnish outdoor and hunting knife called Heimo 4" Bushcraft edition, full tang, is designed to take on all your wilderness adventures and challenges. Very popular for bushcraft, hunting, fishing and the outdoors open.Roselli has chosen to make this blade with carbon steel for a longer life of the edge.

This model has a full tang, therefore more balanced and robust than the standard version. In fact, Roselli full tang knives are resistant, durable and perfect for heavy use.

The knife has a beautiful curly stained birch handle coated with linseed oil to ensure a firm grip, even when wet. The handle also has brass clamps and strap holes.

It comes in a handmade sheath of dark vegetable tanned Finnish leather, with a metal spring to keep the knife firmly in place at all times. You can choose between two scabbard options; scabbard combined with Firesteel Roselli or a standard scabbard.

Intended use: Hunting/Sports

Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Birch
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: -
Total length: 220mm.
Balancing: -
Weight: 200g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -

The "first" Roselli, with a minimalist design dating back to 1976. For over 45 years it has been used in wild nature and tackles hunting, fishing and life in the open air with ease. This version of Hunting is the full tang version, more balanced and robust. Roselli full tang knives are resistant, durable and perfect for heavy use.

This handmade Finnish hunting knife was originally developed as a knife for moose hunters in Finland and quickly became the perfect companion for handling larger game such as moose, wild boar and larger deer. The design and profile of the blade make it excellent for skinning game.

This new version features a full tang carbon steel blade and a curly birch handle, coated with linseed oil, which brings a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.

Intended use: Hunting/Sports

Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Birch
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: -
Total length: 220mm.
Balancing: -
Weight: 200g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -

When one isn't enough..., this Double Sheath Set, is the two knife configuration that allows you to easily carry both the "Hunting Knife" and the "GrandMother" knife.

Both blades of the two knives are made of forged carbon steel and the handles are made of curly birch, coated with linseed oil, which ensure a firm grip, even when wet. Comes with a handcrafted double sheath of light vegetable tanned Finnish leather, tailored to fit both knives

Roselli - Hunting Knife - R100 - Artisan Knife

Intended use: Hunting/Sports

Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 227mm.
Balancing: -
Weight: 120g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -

Roselli - Grandmother Knife - R130 - Artisan Knife

Intended use: Hunting/Sports

Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: -
Total length: 150mm.
Balancing: -
Weight: 52g.
Closure: -
Clips: -
Sheath: brown leather
Note: -

With a lower weight and smaller size than its big brother Big Leuku - the small Leuku is a versatile outdoor tool with properties slightly more similar to those of a bushcraft knife. The little Leuku is an all-round knife, capable of handling everything you can tackle in a woodland environment: cutting, separating bones, carving and many other tasks within the outdoors and wilderness survival.

The blade is made of forged carbon steel, and the handle is curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.

Intended use: Hunting/Sports

Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 140mm.
Blade thickness: 5mm.
Closed length: -
Total length: 265mm.
Balancing: -
Weight: 240g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -

* Ultra-lightweight organizer with waterproof lining made of 500D tear-resistant polyester fabric.
* Hidden zippered pocket in main compartment with ample storage space
* Zippered front compartment for quick and convenient access
* Back pocket for smartphones, keys, etc.
* Adjustable shoulder strap
* Easy-to-use zipper tab with extended Nitecore tab

Color: Black
Material: 500D water-resistant polyester fabric
Length: 35cm
Height: 13.5cm
Thickness: 7cm
Weight: 166g.

The M-PAT was created by U.S. military service member Seth Brown and was designed specifically for fighter jet crews. Its slim profile and sturdy size are designed it specifically so that it can be carried on the safety vest or otherwise at the top of the torso in order to cause as little discomfort as possible while in the flight deck. It is ideal for vertical carrying and, thanks to the two retention modes of the sheath, it will not go anywhere until you need it. The M-PAT's applications extend outside the cockpit and it is perfectly suited to a belt or tactical vest. It is always handy when you need it and out of the way when you don't. When you only have room for one knife for self-defense and survival, there's the M-PAT.


Intended Use: Tactical/Military

Type of production: Semi-Industrial
Country of manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade treatment: Coyote Tan Coating
Handle: Canvas Micarta
Blade Length: 124mm.
Blade thickness: 4.8mm.
Total Length: 248mm.
Balance: on the guard branch
Weight: 309g.
Sheath: kydex
Packaging: transparent plastic bag
Notes: Emergency whistle - Design by Seth Brown

Intended use: sports/collection

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade finish: stone washed
Handle: Blue anodized aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 113m.
Total length: 193mm.
Handle thickness: 16mm
Weight: 116g.
Locking mechanism: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos - Zip case
Notes: Design by Jesper Voxnaes

Intended use: sports/collection

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade finish: Black PTFE
Handle: OD green anodized aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 113m.
Total length: 193mm.
Handle thickness: 16mm
Weight: 117g.
Locking mechanism: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos - Zip case
Notes: Design by Jesper Voxnaes

Nahuel means jaguar in the Mapuche language, the indigenous people of Argentina and Chile. Boker Arbolito's new folding knife design is equally robust and elegant. The main feature of this handle with linerlock block is the presence of light Guyacan ebony on both sides.

This gives the knife a nice feel and a warm look. Another eye-catching detail is the spacer, which is also made in Guyacan. The Böhler N678 stainless steel teardrop blade is easy to open via a flipper, which offers reliable finger protection when folded.

A deep pocket clip embedded in the wood allows for fold-down / right-handed carry.

Intended use: Hunting / Utility

Type of production: Industrial
Country of production: Argentina
Blade: N678Co 58HRC stainless steel ful tang
Blade finish: Satin
Handle: ebony
Blade length: 82mm.
Blade thickness: 3.38mm.
Total length: 200mm.
Weight: 151g.
Sheath: reversible clip
Packaging: cardboard box with Boker logos
Note: -

The great success of the Boker M4 Sherman Damascus, due not only to the history of the historic Damascus steel but also to the design, prompted us to use this as the basis for a performing and pleasant EDC with a titanium framelock, which, despite the metallurgy of the blade powders, also carries a real piece of M4 Sherman Damascus.

For the blade of the Sherman EDC we used Magnacut for the first time, which is not without reason celebrated as a "miracle steel". Unlike the usually used tool steels, this steel was specially developed for the production of knives. The three desirable properties of a steel - edge retention, toughness and resistance to rust (stainless in the DIN category) - represent a conflict of goals. To make the steel resistant to rust, the addition of chromium is necessary, which makes the structure coarse, brittle and prone to fracture under normal conditions. The high hardness, which has a positive influence on the cutting life, is usually achieved at the expense of toughness. With Magnacut, despite the high chromium content of 10.7% and an impressive hardenability of over 62HRC, it was possible to achieve a very fine microstructure and thus a high toughness and shock load tolerance. The addition of nitrogen plays a central role here.

The central structural difference compared to the M4 Damascus model is the elegantly integrated flipper, which allows the blade to open smoothly with a small impulse.

A special highlight of the Boker Sherman EDC is the protruding Damascus backspacer, which is equipped with a lanyard hole in an elongated slot design. The Damascus of the backspacer was forged from various materials from Chad Nichols' M4 Sherman tank production in the Customized Ladder pattern and resembles the tank tracks left in the ground by the heavy chains of the M4 Sherman.

Intended use: Collection

Type of production: Industrial
Country of production: Germany
Blade: MagnaCut steel
Handle: in steel and micarta
Blade length: 75mm.
Blade thickness: 3mm.
Total length: 178mm.
Weight: 95g.
Clip: stainless steel
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: Certificate of Guarantee - Case in gray box

Compact and easy to use sharpening device, mainly used for knives and larger garden tools such as axes, machetes, spades and hoes. The sanding discs have two sides of different grain sizes. Silica gel shells, which lock the discs, are used for storage and transportation.

Model 09BO378 features two sides; one with a 200 grit abrasive surface, the other with a 600 grit abrasive surface.

Dimensions:
length 60 x 60 mm - Weight: 200g.

Quality level: good

Intended Use: Sport/Utility

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS 10A
Blade treatment: Black Coating
Handle: Griv-Ex™
Blade Length: 100mm.
Blade thickness: 3.8mm.
Total length: 250mm.
Weight: 288g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew Demko

Key Features.
* Quad-slot USB-C smart charger.
* QC (Quick Charge) and PD (Power Delivery) inputs available.
* Able to charge 2 batteries at the same time and control each slot independently.
* Charging speed of up to 3,000mA in a single slot.
* Compatible with Li-ion and Ni-MH/Ni-Cd batteries, with automatic detection
* Automatic detection of battery charge level and automatic selection of appropriate voltage and charging mode
* Automatic selection among 3 charging modes (DC, CV and -dV/dt).
* Automatic detection of large/small capacity batteries and automatic selection of appropriate charging current
* Automatic suspension upon completion of charging
* Reverse polarity and short circuit protection.
* Activation of overcharged batteries
* Protection against excessive charging time (overtime).
* Made of durable and fireproof PC materials.
* Optimal design for heat dissipation
* Certified by RoHS, CE, FCC and CEC

ACCESSORIES INCLUDED
USB-C Charging Cable

TECHNICAL SPECIFICATIONS
Input: 5V⎓2A / 9V⎓2A / 12V⎓1.5A - 18W (MAX)
Output: 4.2V±1% / 1.48V±1%
Rapid Recharge: 3,000mA*1 MAX / 1,500mA*2 MAX / 1,000mA*3 MAX / 750mA*4 MAX
Standard Recharge: 2,000mA*1 MAX / 1,000mA*2 MAX / 700mA*3 MAX / 500mA*4 MAX

BATTERY COMPATIBILITY
IMR/Li-ion: 10440, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 21700, 22500, 22650, 25500, 26500, 26650, 26700
Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D

Dimensions: 148mm x 105mm x 37mm (5.83" x 4.13" x 1.46")
Weight: 191.4g (6.75 oz) (Charging cable not included)

Compact and easy to use sharpening device that is mainly used for knives and larger garden tools such as axes, machetes, spades and hoes. The sanding discs have two sides of different grain sizes. Silica gel shells, which lock the discs, are used for storage and transportation.

Model 09BO379 has sides; one with an industrial diamond coated 360 grit abrasive surface over a plastic core and the other with a ceramic abrasive surface. Both sides are suitable for wet and dry sharpening.

Dimensions:
length 60 x60 mm - Weight: 236g.

Quality level: good

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: stainless steel VG10
Blade treatment: satin finish
Handle: G10
Blade length: 84mm.
Blade thickness: 2.5mm.
Total length: 191mm.
Weight: 43g.
Clip: stainless steel, machined from solid, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: -

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Blackwash
Handle: Micarta and Blackwash Steel
Blade length: 71mm.
Blade thickness: 2.8mm.
Total length: 165mm.
Weight: 67g.
Clip: stainless steel, removable
Closure: Frame Lock
Packaging: nylon zippered pouch - cardboard box with Boker Plus logos
Notes: design by Mike Skellern

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: carbon fiber
Blade length: 91mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 132g.
Clip: steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: -

FEATURES
* USB-C rechargeable dual-beam headlamp.
* Specially designed for outdoor activities.
* Equipped with spotlight + floodlight (color temperature: 5500K) and red light illumination
* With a maximum output of 400 lumens
* Uses a unibody optical lens system with various facets to reflect a light evenly and diffusely
* Maximum beam intensity of 1,029cd and maximum range of 64m
* Built-in 650mAh Li-ion battery.
* Constant current circuit ensuring stable light output with a maximum range of 90h
* Designed with two different buttons in shape and tactile feel for easy one-handed operation
* 4 brightness levels, 3 light sources and 3 special modes available
* Integrated intelligent Li-ion battery charging circuit with USB-C charging port.
* Designed with 4 charge indicators to indicate the remaining battery charge
* Made of durable polymer material
* Waterproof and dustproof as per IP66 standard
* Shock resistant up to 1 meter

WEIGHTS AND DIMENSIONS
Dimensions: 60.1mm x 36.8mm x 25mm (Stand Included)
Weight: 56g (Stand and Elastic Band Included)

ACCESSORIES INCLUDED
USB-C Charging Cable, Elastic Headband

TECHNICAL SPECIFICATIONS.
Led: 1x white spot light, 1x white flood light, 1x red auxiliary all with a life cycle of 50,000 hours
Operating Modes: 10 light powers (Mix, Spot, Flood, Red) + 2 special modes (SOS and Beacon)
Powers and Durations with MIX light : 400 Lumens (2.40h. ) -> 200 Lumens (4.40h.) -> 60 Lumens (10.25h.)
Peak power : 1029 candelas
Maximum lighting distance: 64m.
Power and luminsa selection method: Two dedicated power buttons, and light selection
Body: polymer
Battery: built-in, non-removable, 3.7V, 650mAh Li-Ion battery
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: Equipped with integrated charging system via USB-C port - Separate remaining charge indicator

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel M390
Blade treatment: Satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 2.3mm.
Total length: 167mm.
Weight: 75.5g.
Clip: Stainless steel billet, removable
Closure: Liner Lock
Packaging: nylon zippered pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings

Intended Use: Tactical

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Stonewashed
Handle: made of Griv-Ex polymer, with steel pommel
Blade length: 267mm.
Blade thickness: 5mm.
Total length: 387mm.
Balance: Advanced
Weight: 474g.
Sheath: Secure-Ex ABS
Packaging: Cardboard box with Cold Steel logos
Notes: Limited and numbered edition with serial number engraved on blade and with Lynn Thompson's autograph on box

KEY FEATURES:
* Uses a Luminus SFT-40-W LED with a maximum power output of 1,800 lumens.
* Maximum light intensity of 41,000cd and maximum range of 405 meters.
* Glass and dishes with anti-reflective, crystal coating and with PDOT (Precision Digital Optics Technology) treatments.
* Powered by a high-capacity Li-ion 21700 battery and compatible with both 18650 and CR123 batteries to allow constant light for up to 1,500 hours.
* Tactical Mode and Daily Mode functions.
* Rear power button and side metal selection button control 5 different brightness levels and 3 special modes.
* STROBO mode constantly changes frequency randomly to maximize disorientation effects.
* Built-in illuminated potentiometer, located below the Mode button, which indicates the remaining battery charge.
* Built-in potentiometer can indicate the remaining voltage of the inserted battery, with minimal deviation (±0.1V)
* Built-in charging circuits via USB-C port.
* NITECORE 21700 (NL2150 5,000 mAh) rechargeable lithium-ion battery included.
* Highly efficient electronic circuits that provide stable and continuous lighting
* ATR temperature regulation technology (Patent No. ZL201510534543.6)
* Electronic protection against battery polarity reversal.
* Optical lenses with scratch-resistant coverage on both sides
* Constructed of solid aircraft aluminum alloy.
* Rugged HAIII type anodization with military specifications.
* Submersible as per IP68 specifications (up to 2m depth for 30min)
* Impact and drop resistant up to a maximum of 1m. height


TECHNICAL SPECIFICATIONS:
Led: 1x Luminus SFT-40-W with a life cycle of 50,000 hours
Operating Modes: 5 light modes and 3 special modes, all electronically regulated
Powers and Durations: 1800 Lumens (0.45h) -> 1050 Lumens (3.15h) -> 260 Lumens (8.45h) -> 45 Lumens (47h) -> 1 Lumens (1500h) -> Strobe -> Beacon -> S.O.S.
Peak power: 41000 candles
Maximum lighting distance: 405m.
Lighting Method: Rear Button with "Momentary On" system for light signals
Light selection method: Front button located under the head
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: (included): 1x 21700 3.6V NL2150 - also compatible with 1x 18650 Li-Ion 3.6/3.7V or 2x CR123 3.0/3.6/3.7V
Measurements: 14.1cm (L) - 2.54cm (D shaft) - 2.54cm (D head) - 2.72cm (D tang)
Weight: 80g. without batteries
Accessories: NITECORE 21700 Li-ion Rechargeable Battery (NL2150 5,000mAh), USB-C charging cable, Clip, Wrist Corrector, Replacement O-rings, 18650/CR123 battery adapter, NTH10 tactical scabbard
Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
Impact resistance: withstands falls from 1m height


Actual powers and durations, laboratory certified by ANSI/PLATO FL1-2019 standard

The UT05 ultra-light lighting system uses a high CRI COB light source (CRI≥90, color temperature: 4000K) with large luminous bodies that produce a maximum output of 400 lumens with a maximum range of 27 meters.

Due to its wide beam (160°) diffusion capability, it has efficient light transmission over rough terrain.

The UT05 features a convenient USB-A socket, compatible with universal USB power sources. One Button Interface is easy to use to adjust the brightness level.

The UT05 is ideal for various outdoor activities, such as trail running, training running, trekking and hiking. With Advanced Power Cut-Off (APC) technology, it can provide extremely low standby power consumption for 365 days. Guaranteed by the highly efficient constant current circuit, the constant brightness beam without flashing gives you a comfortable viewing experience. It is applicable for all weather conditions such as IP66 rated and 1m shock resistant.

In order to work, the UT05 model must be connected via the USB-A socket to a power source (power bank), the Nitecore NB10000 -NC10000 NB20000, NPB1 products are perfect.

SPECIFIC TECHNIQUES:
COB: High CRI COB light source
Operating modes: 2 bright modes
Powers and Duration: 400 Lumen (5.30h) 27 meters -> 200 Lumen (13h) 20 meters
Peak power: 185 candles
Maximum lighting distance: 27m.
Ignition Method: Advanced Power Cut-Off (APC)
Weight: 44g.
Waterproof: as per IP66 standard
Impact resistance: withstands drops from 1m in height

The wine kit is suitable for both white and red wine.

Perfect gift idea for any wine lover.

The kit consists of:

"Aerovin" decanting stopper 

"Vine" wine pouring stopper with integrated microfilter 

"Vine" bottle stopper 

and an attractive storage stand.

 All placed on an acacia wood stand.

Not suitable for dishwasher use.

Dimensions: 13.5x4x18 cm.

Material: Stainless steel, Acacia wood, Resin

Intended Use: Sporting / Utility

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade finish: Stonewashed
Handle: GFN (nylon and fiberglass)
Blade length: 63mm.
Blade thickness: 2.5mm.
Total length: 152mm.
Weight: 62g.
Closure: Atlas Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -

Intended use: Utility / Collection

Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: Marble
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balancing: advanced
Weight: 450g.
Sheath: in thermoformed kydex, with double belt loop, M.O.L.L.E. compatible
Packaging: without packaging, accompanied by certificate of authenticity, version with hallmark with WT and DP marks
Notes: Each knife is unique and made entirely by hand

Intended Use: Sport/Utility

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS 10A
Blade treatment: Stone Wash
Handle: Griv-Ex™
Blade length: 100mm.
Blade thickness: 3.8mm.
Total length: 250mm.
Weight: 288g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew Demko

Destinazione d'uso: Neck Knife

Tipo di produzione: Industriale
Paese di produzione: Maniago, Italia, by Fox Cutlery
Lama: acciaio inox N690Co
Trattamento lama: Black Cerakote
Impugnatura: acciaio inox N690Co
Lunghezza lama: 40mm.
Spessore lama: 3.8mm.
Lunghezza totale: 138mm.
Peso: 30g.
Fodero: Da collo, in Kydex, compatibile con sistemi di aggancio UltiClip (non compresi, acquistabili separatamente)
Confezione: Scatola di cartone con loghi Bastinelli Knives
Note: Prodotto in Italia da Fox Cutlery

The outstanding Boker Plus Fragment convinces as a light EDC or backup knife with an extremely reduced design.

The practical pocket knife completely dispenses with a front handle and instead relies on a minimalist rod that connects the blade axis screw.

The blade is made from 9Cr13CoMoV steel and, like the entire all-steel tang construction, is finished in a dark stonewash finish.

The operational safety of the modern slipjoint pocket knife is further enhanced by a 90 degree stop device when opening and closing the blade. Equipped with hole for lanyard and practical clip for transport.

Intended use: EDC / Sport

Type of production: Industrial
Country of production: Taiwan
Blade: 9Cr13MoV stainless steel
Blade treatment: blackwash
Handle: titanium
Blade length: 50mm.
Blade thickness: 2.5mm.
Total length: 130mm.
Weight: 31g.
Clips: -
Closure: Slip Join
Packaging: cardboard box with Boker Plus logos
Note: -

The distinctive design, the Tracker concept with two separate blades, the impact-resistant 1095 carbon steel and the remarkable price-performance ratio quickly made Dave Wenger's Boker Plus Mini Tracker a top seller in the bushcraft and outdoor scene. While the front of the larger Tracker variants is primarily suitable for chopping and splitting, the blade shape of the smaller size of the new Boker Plus Micro Tracker shows completely different advantages and qualities.

The Micro Tracker shares the benefits of two sharpening angles on one blade with its bigger brothers. Additionally, the front half of the blade in the smaller format is great for working on a chopping board and the sturdy tip is great for opening boxes in everyday use. The small nose, which separates the two grinds, pulls hard when cutting in soft materials and is predestined for cutting ropes, lines and belts.

The field and 3D archer appreciates the compact size, powerful point and archaic look when working out the wrong arrows. The Boker Plus Micro Trapper has the same indestructible materials and finish as the Mini Tracker.

The three hollow brass studs carefully recessed and chamfered into the handle add visual flair. Supplied with a belt adapter and sheath

Intended use: Utility

Type of production: Industrial
Country of production: Taiwan
Blade: 1095 steel ful tang
Blade finish: powder coat
Handle: Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 190mm.
Weight: 159g.
Sheath: Kydex
Packaging: cardboard box with Boker Plus logos
Notes: Design by Dave Wenger