Marzo 2014

Recommended use: hiking / heavy utility

Type of production: Industrial
Country of production: Italy
Blade: full tang, in Sleipner 60 / 61HRC steel
Blade finish: Satin
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balancing: advanced
Weight: 410g.
Sheath: Kydex and Nylon, modular, multiposition, MOLLE compatible
Packaging: Cardboard box with Lion Steel logos
Note: -

Type of production: Industrial
Country of production: China
Blade: stainless steel 2Cr13
Blade treatment: Black Oxide Coating
Handle: Nylon and Glass Fiber
Blade length: 98.5mm. (only sharp) 197mm (with hammer)
Blade thickness: 10mm. In the central point
Total length: 393mm
Weight: 860g.
Sheath: TPR blade cover (thermoplastic rubber)
Packaging: cardboard box with United Cutlery logos
Note: -

Zuava Cattle Polished R-ZVC19 - knife

Traditional knife of Scarborough and is used in all of Tuscany to the first 800. He had an element of novelty, for its time: the metal frame inside the handle as well in traditional cattle.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 19 cm.
Weight 100 gr.

Traditional Scarperia knife and used throughout Tuscany until the early 1800s. It had an element of novelty, for the time: the metallic structure inside the handle as well as in the traditional bovine.

440 stainless steel blade.
Blade length 8 cm.
Blade thickness 3 mm.
Open length 19 cm.
Weight 100 gr.

Palmerino horn cattle PA2C20 two knives - knife

The production of Scarborough has not devoted much attention to penknives.
It was, however, made a template from the desk, which in the past was used to make the tip of the quill pens and pencils.
This sharpener Scarperia was always devoid of spring and could have from one to two blades; unmistakable the shape of the handle, in a single piece of horn.
In the catalogs of the early years of the twentieth century these items were listed as "sharpeners use Palmerini" which was actually the name of a renowned manufacturer of the nineteenth century.
Proposed model is at the tip of the horn two blades.

Stainless steel blade 440.
Blade length 4.6 cm.
Blade thickness 2.5 mm.
Overall length 15 cm.
Weight 40 gr.

Rasolino in bovine RAC-20 - Knife

The name of this knife comes from the shape of the blade, reminiscent of the razor.
Had spread following the law Giolitti in 1908 which placed severe limitations to the port of sharp knives, and that favored the production of various models in a truncated tip.
  The Rasolino is distinguished by the slight curvature of the blade and back to the shape of the handle.

Stainless steel blade 440.
Blade length 9 cm.
Blade thickness 2.5 mm.
Overall length 20 cm.
Weight 70 gr.

The silver Fiorentino version has the same construction characteristics as the classic Fiorentino, but it is made with silver finishes, in the lily, in the band and in the rings worked by hand by skilled engravers. Horn tip model.

Intended use: sports / collection

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and Silver with handcrafted engravings
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 76g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which our handcrafted products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Destinazione d'uso: Escursionismo/Heavy Duty

Tipo di Produzione: industriale
Lama: in acciaio al carbonio 65Mn a 54/56 HRC con trattamento Black Powder
Produzione Lama Cina
Manicatura: Polimeri TPR e Nylon
Lunghezza lama: 355mm.
Spessore della lama: 2.5mm.
Lunghezza totale: 492mm.
Bilanciatura: avanzata
Peso: 575g.
Chiusura: -
Clip: -
Fodero: in Nylon
Confezione: scatola di cartone con loghi CRKT
Note: Design by Ken Onion

The collaboration between the writer Nicolai Lilin and Knives Maserin was born on 987 Siberian Knife. Knife shapes typically Siberian, has blade and scabbard with designs that reflect themes and symbols tradition of this land, cold and still largely mysterious; elements also present in figurative works and tattoos created by the author of the best selling book Siberian Education, then became blockbuster thanks to the wise directed by Gabriele Salvatores.

Intended use: Hunting / Sports / Collection

Type of production: Industrial production

blade: Italian blade: 440A stainless steel blade

Treatment: -

Handle: Wood Pau Santo

Blade length: 170mm.

Blade thickness: 4.5mm.

Closed Length: -

Overall length: 293mm.

Thick when closed: -

Balance: -

Weight: 288g.

Lock: -

Clip: -

Sheath: Leather

Package: Cardboard Box

Notes: Kolima Design by Nicolai Lilin

The Selvans is born from the collaboration between Extrema Ratio and FISSS (Italian Federation of Sports and Experimental Survival). The project consists of modifying Ontos, a military survival knife, to accentuate and maximize the knife's performance as a hiking tool.

The handle has been lengthened and the blade weighed down to facilitate the effectiveness of the cutting strokes and to make more use of the inertia of the blow.

Intended use: Heavy Utility
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Surface treatment: Brun-MIL-C-13924
Handle: Forprene
Blade length: 15.5mm.
Blade thickness: 6.3mm.
Total length: 310mm.
Balancing: advanced
Weight: 424g.
Sheath: nylon, MOLLE compatible
Packaging: Cardboard box with Extrema Ratio logos
Note: developed in collaboration with FISSS (Italian Federation of Sports and Experimental Survival)

Nuova Versione 2014

Per anni gli utenti sono sempre stati combattuti tra due distinte scelte pensando ad un multiuso utilizzabile con una mano sola: pinze ad apertura rapida, sacrificando gli utensili oppure utensili ad apertura rapida, sacrificando le pinze.

Oggi Leatherman permette di risolvere qualsiasi problema di scelta, proponendo un utensile che permette di aprire, con una sola mano, sia la totalità degli utensili presenti, che le pinze, dotandole inoltre di un comodo leveraggio a molla per permettere di aprire e chiudere le chele agevolmente.

CARATTERISTICHE:
Pinza apribile ad una sola mano
Utensili apribili ad una sola mano
Utensili dotati di sistema di chiusura liner lock indipendente
Anello per lacciolo/correggiolo integrato
Realizzata interamente in acciaio inox
Fodero in Nylon con agganci M.O.L.L.E.
25 anni di garanzia Leatherman

UTENSILI:
Pinze a becco con molla di apertura rapida
Tronchesi intercambiabili in acciaio inox 154CM
Lama liscia in acciaio inox 420HC
Lama seghettata in acciaio inox 420HC
Cacciavite Philips
Cacciavite piatto piccolo
Cacciavite piatto medio
Cacciavite piatto largo
Sega per legno
Tagliacinture/Tagliacavi
Apribottiglie
Apriscatole
Aprivavole per ossigeno

DIMENSIONI:
Lunghezza da chiusa: 115mm.
Lunghezza lama: 60mm
Peso totale: 280g.

Nuova Versione 2014

Per anni gli utenti sono sempre stati combattuti tra due distinte scelte pensando ad un multiuso utilizzabile con una mano sola: pinze ad apertura rapida, sacrificando gli utensili oppure utensili ad apertura rapida, sacrificando le pinze.

Oggi Leatherman permette di risolvere qualsiasi problema di scelta, proponendo un utensile che permette di aprire, con una sola mano, sia la totalità degli utensili presenti, che le pinze, dotandole inoltre di un comodo leveraggio a molla per permettere di aprire e chiudere le chele agevolmente.

CARATTERISTICHE:
Pinza apribile ad una sola mano
Utensili apribili ad una sola mano
Utensili dotati di sistema di chiusura liner lock indipendente
Anello per lacciolo/correggiolo integrato
Realizzata interamente in acciaio inox
Fodero in Nylon con agganci M.O.L.L.E.
25 anni di garanzia Leatherman

UTENSILI:
Pinze a becco con molla di apertura rapida
Tronchesi intercambiabili in acciaio inox 154CM
Lama liscia in acciaio inox 420HC
Lama seghettata in acciaio inox 420HC
Cacciavite Philips
Cacciavite piatto piccolo
Cacciavite piatto medio
Cacciavite piatto largo
Sega per legno
Tagliacinture/Tagliacavi
Apribottiglie
Apriscatole
Aprivavole per ossigeno

DIMENSIONI:
Lunghezza da chiusa: 115mm.
Lunghezza lama: 60mm
Peso totale: 280g.

New Version 2014 with 5160 steel

Tops Knives - D.A.R.T. (Direct Action Rescue Team)

Type of production: semi-industrial
Blade: Carbon Steel 5160
Handle: Micarta
Blade Length: 190mm.
Overall Length: 330mm.
Blade thickness: 6mm.
Length Closed: -
Weight: 430g.
Closure: -
Sheath: Cordura
Notes: full tang