military and tactical knives
-
CRKT - M16-12LE knife Small Law Enforcement Tanto - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: small marks on tip
* Marks on handle: clip slightly marked
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryBlade: Teflon-coated AUS-8 high-carbon 57/58HRC stainless steel
Handle: Zytel grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Total length: 185mm.
Weight: 97g.
Closure: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety catchAP-CM16-12LE -
Boker Plus - Jim Wagner Reality-Based Tanto Blade - PRIVATE COLLECTION - 01BO051
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No since 2014
* Sharpening: Original
* Marks on blade: No
* Marks on handle: No
* Box: NOT present
* Checked and certified by our internal laboratory
Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim VagnerBO-01BO051 -
ExtremaRatio - MF0T Zero Oxide Grey 33pcs. Limited Edition - PRIVATE COLLECTION - knife
Exclusive limited edition series in collaboration with INSTRUCTOR ZERO (Team Zero International Training Security Company), renowned firearms training specialist, risk analyst and strategic consultant working worldwide for both military and law enforcement specialized units and government agencies.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from private collection, previously purchased.
* Condition: New, never used
* Commercially available: Discontinued, limited run of only 33 numbered pieces
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Tactical / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Testudo MIL-C-13924
Handle: Anticorodal
Blade Length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 23mm. (15mm without clip)
Weight: 139g.
Closure: Liner Lock with additional safety catch
Clip: Stainless Steel
Packaging: watertight plastic box with Extrema Ratio and Team Zero logos, Warranty Certificate, Velcro Patch, Limited edition made in only 33 piecesER-MF0TBZOG -
Cold Steel - SRK - Survival Rescue Knife - Black & Tan - 49LCKZ-DTBK - Knife
Intended use: tactical / sports
Type of production: Industrial
Country of production: Taiwan
Blade: SK-5 carbon steel
Blade treatment: Black Tuff-Ex painting
Handle: Kray-Ex (Kraton)
Blade length: 155mm.
Blade thickness: 5mm.
Total length: 275mm.
Balancing: on the guard branch
Weight: 230g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logosCS49LCKZ-DTBK -
Boker Plus - Kirke by A. De Santis - Nitro-V & G10 - 01BO636 - knife
Delightfully tactical - Alessandra De Santis/Hydra Design enchants knife enthusiasts around the world with the irresistible charm of the Boker Plus Kirke, inspired by the goddess of sorcery of the same name from Greek mythology. Despite its bewitching magic, the Italian knife designer stays true to its tactical line and keeps the pocket knife in a muted black color.
The ball-bearing-opening blade, made of Nitro-V steel with an austere black stonewash finish can be operated either in flipper or with the generous thumb opening, while the push-button lock ensures intuitive knife release.
Pronounced finger recesses, fine texture on the G10 handle grips and a thumb recess on the back of the blade ensure a secure grip at all times and a high level of safety at work, even in the most adverse conditions.
Intended Use: Sporting/TacticalType of production: Industrial
Country of manufacture: China
Blade: Nitro-V stainless steel
Blade treatment: stonwashed
Handle: G10
Blade length: 86mm.
Blade thickness: 3.8mm.
Total length: 201m.
Weight: 100g.
Clip: removable and reversible, stainless steel
Closure: Button Lock
Packaging: cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings - design by Alessandra De SantisBO-01BO636 -
ExtremaRatio - Dobermann IV Tactical Black - Bohler S600 64HRC - knife
ExtremaRatio - Dobermann IV Knife - S600 - Tactical Black represents the evolution of the first and most classic Extrema Ratio model, the K1 DOBERMANN. Since 1997, the DOBERMANN model has undergone significant aesthetic and design changes, adapting to the evolution of tastes and trends while remaining true to the original designs. Versatility of use and structural resistance are the main characteristics of DOBERMANN IV S600, making it ideal for hunting, survival, camping, and military use.
-
- Type: Tactical / Collection
- Blade Production: Italy
- Blade: Stainless steel S600 64hrc
- Blade Treatment: EXP DARK
- Handle: Forprene
- Blade Length: 185mm
- Blade Thickness: 6.3mm
- Total Length: 315mm
- Weight: 360g
- Sheath: Cordura with M.O.L.L.E attachments
- Packaging: Cardboard box with Extrema Ratio logos
The blade of the DOBERMANN IV S600, made from Böhler S600 steel, offers excellent hardness, wear resistance, and toughness, thanks to the high content of molybdenum, tungsten, and vanadium. The addition of cobalt promotes the formation of small carbides, further improving wear resistance. With a hardness of 64 HRC, it ensures long-lasting edge retention. The “EXP DARK” teflon coating protects the steel from oxidation.
DOBERMANN IV S600 features a green forprene handle with a glass-breaking tang. It comes with a green cordura thigh sheath, adaptable for both left and right-handed users and compatible with the M.O.L.L.E system.
ER-DOB-S600 -
-
Wander Tactical - Mountain Lion Custom Edition - Marble & Micarta Brown - handcrafted knife
Intended Use: Excursionism / Heavy Duty
Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC
Blade Finish: Black
Handle: Micarta
Blade Length: 140mm.
Blade thickness: 6.3mm.
Total length: 257mm.
Balance: advanced
Weight: 433g.
Sheath: leather, handcrafted
Packaging: certificate of guarantee and authenticity
Notes: Each knife is unique and handcrafted in every partWT-ML-MMB -
Fox - Defender - Black Top Shield N690Co & FRN - FX-689B - knife
In this new edition of the Defender FX-689, we have focused our attention on the blade, introducing an extraordinary 5 mm thick N690Co blade, which gives it particularly high strength. The handle features deep transverse grooves for an extremely secure grip.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: Black Top Shield
Handle: FRN (Fiberglass Reinforced Nylon) with Black Top Shield steel guard and pommel
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 320mm.
Weight: 360g.
Sheath: made of Kydex, with M.O.L.L.E. compatible loops.
Packaging: cardboard box with Fox logos
Notes: -FX-689B -
ExtremaRatio - Glauca B1 G.I.G.N. Knife - PRIVATE COLLECTION - knife
The GLAUCA B1 folding knife was born from the collaboration with the GIGN (special unit of the French National Gendarmerie). It has a tip designed to allow maximum penetration. On the back of the handle it features a stop strap cutting system.
It is equipped with a rear glass breaker, a clip that can be applied in three positions and a side safety device.
The rigid sheath is made of ABS applied to a Cordura base and allows you to store the knife with the blade open.
Allows multiple attachment options: MOLLE system for tactical vests, belt attachment and thigh attachment.
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Excellent condition
* Commercially available No
* Sharpness: Original
* Marks on blade: small scratches on the blade
* Marks on handle: NO
* Packaging: YES
* Sheath: YES
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our internal laboratory
Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Burnished
Handle: Rough Anticorodal
Blade length: 115mm.
Blade thickness: 4mm.
Closed length: 158mm
Total length: 268mm.
Closed thickness: 15mm.
Weight: 197g.
Closure: Liner Lock with Additional Safety
Clip: Removable and multi-position, in stainless steel
Sheath: Cordura and Kydex with magnetic blade retention
Packaging: Cardboard box with Extrema Ratio logos
Notes: supplied with the G.I.G.N. (National Gendarmerie Intervention Group) French, specialized in operations against terrorism and emergency response in the event of hostagesAP-ER-GLA-B1 -
Boker Magnum - Field Flipper - 01SC006 - knife
In everyday life or outside of it, the Magnum Field Flipper is an EDC knife for all occasions.
The pocket knife stands out above all by its tactically unobtrusive appearance. The black-coated 440A stainless steel blade and military green Micarta handle are attractive features. The blade opens smoothly with a ball-bearing flipper system or with a thumb pin on either side and closes reliably with a linerlock. Supplied with a lanyard hole and tip-up clip.
Type of manufacture: industrial
Blade: 440A 56HRC stainless steel
Blade finish: Teflon coated
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.8mm.
Total length: 183mm.
Weight: 108g.
Closure: liner lock
Clip: removable, stainless steel
Sheath: -
Notes: -BO-01SC006 -
Wander Tactical - Mountain Lion Custom Edition - Dual Tone & Micarta Green - handmade knife
Intended Use: Excursionism / Heavy Duty
Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC
Blade Finish: Dual Tone, Black & Satin
Handle: Micarta
Blade Length: 140mm.
Blade thickness: 6.3mm.
Total Length: 255mm.
Balance: advanced
Weight: 425g.
Sheath: leather, handcrafted
Packaging: certificate of guarantee and authenticity
Notes: Each knife is unique and handcrafted in every partWT-ML-DTMG -
Wander Tactical - Godfather Bowie Custom Edition - Ice Brush & Micarta Green - knife
Use: Heavy Duty / Collection
Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Ice Brush
Handle: Micarta
Blade Length: 237mm.
Blade thickness: 6.5mm.
Total length: 390mm.
Balance: backward
Weight: 690g.
Sheath: leather
Packaging: certificate of guarantee and authenticity
Notes: special edition, with bowie-style bladeWT-GF-BIBG -
Wander Tactical - Barracuda Compound - Raw & Black Micarta - handmade knife
Use: EDC / Light Utility / All Round
Type of production: Handmade
Country of Production: Italy
Blade: integral, D2 steel at 59/61HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 205mm.
Balance: backward
Weight: 214g.
Sheath: made of Kydex, thermoformed, with tek-lok type attachment
Packaging: certificate of guarantee and authenticity
Notes: Each knife is unique and handcraftedWT-BAR-CRB -
ExtremaRatio - KIRI Neck Knife - N690Co Dark Stone Washed - Kiridashi Knife
The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While retaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency.
Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.
Intended use: Neck knife / UtilityType of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: Dark Stone Washed
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)ER-KIRI-DSW -
Wander Tactical - Haast Eagle 2.0 knife - Compound Raw D2 & Brown Micarta - handmade knife
Intended Use: Multirole / Utility
Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC
Blade finish: Raw, with compound type sharpening
Handle: Micarta
Blade length: 150mm.
Blade thickness: 5mm.
Total length: 295mm.
Balance: advanced
Weight: 395g.
Sheath: thermoformed Kydex with multi-position belt loop, MOLLE compatible
Packaging: polypropylene case with Wander Tactical logos and certificate of authenticity signed and dated
Notes: Particular unique specimen with compound type sharpeningWT-HE2-CORBM -
Wander Tactical - One of a Kind FC WT Knife - Primitive D2 & Leather - Custom Knife
Spectacular one-of-a-kind, specially made for Coltelleria Collini, reminiscent of primitive knives made of obsidian. The blade is masterfully handcrafted faceted and the handle is made of hand woven leather and leather.
The scabbard is made of thermoformed kydex to which soft, fine brown greased leather has been applied externally.
It is completed by the beautiful, entirely handcrafted wooden box with engraved Wander Tactical logos and runes, with the inner part that holds the knife made of handcrafted leather.
Intended Use: CollectionType of production: Handcrafted - one-of-a-kind
Country of production: Italy
Blade: ** unsharpened ** made of D2 steel at 59/60HRC
Blade treatment: primitive, reminiscent of prehistoric obsidian knives
Handle: leather and leather
Blade length: 150mm.
Blade thickness: 4mm.
Total length: 265mm.
Balance: backward
Weight: 166g.
Scabbard: kydex, with handcrafted leather outer cover
Packaging: antiqued wooden box, with engraved logos and runes and handcrafted leather interior
Notes: unsharpened knifeWT-FCWT -
Wander Tactical - Mistral XL - Raw D2 & G10 Desert - Limited Edition - custom knife
We are proud to present a true gem in the world of knives: the exclusive Wander Tactical model, Mistral XL. This extraordinary edition is distinguished by its elegance and refinement, with a Raw Finish blade treatment that captures the essence of craftsmanship, coupled with a G10 desert handle, which not only offers a high-end aesthetic but also ensures a solid and comfortable grip.
This production is extremely limited and unique, made in only 4 separate pieces, making each one a collector's item with collector's value. The knife we present here is number 3 in this exclusive series, as confirmed by the certificate of authenticity.
Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/61HRC
Blade Finish: Raw
Handle: G10 Desert
Blade length: 160mm.
Blade thickness: 5mm.
Total length: 310mm.
Balance: set back about 2cm. from the guard branch
Weight: 419g.
Sheath: made of Kydex, thermoformed, with MOLLE-compatible belt loop
Packaging: accompanied by polypropylene case
Notes: limited series of four pieces different from each other, specimen #3 of #4WT-MI-XL-LE3 -
ExtremaRatio - Ant Black Knife - N690 - Folding Knife
The Ant is the most compact among Extrema Ratio's folding knives. Despite its small size, this model features an extremely sturdy, durable, and reliable structure.
The handle is made of two different elements: the cheek piece crafted from anodized anticorodal aluminum and the hardened steel frame which also serves as the blade lock (Frame Lock System). This mechanism involves a part of the frame bending inward to firmly secure the blade in the open position, enhancing the user's safety during the knife's use.
The tang features a hole for the insertion of a lanyard, and on the right side of the handle, there is a steel clip that allows for concealed carry in the pocket.
The Ant Black version utilizes Böhler N690, hardened to 58 HRC for the best balance between edge retention and toughness, a type of steel used by Extrema Ratio for most of its knives.
The blade is sheep foot-shaped and has a small hole on the top part to facilitate opening. Its particular structure, with a straight edge, allows the user to comfortably rest their fingers on the back of the knife and use it with ease.
Type of production: industrial
Blade: in stainless steel N690 58 HRC
Blade production: Italy
Handle: anodized anticorodal aluminum and steel
Blade length: 70mm.
Blade thickness: 2.2mm.
Closed length: 55mm.
Total length: 127mm.
Balancing: -
Weight: 42g.
Closure: Frame Lock
Clip: removable stainless steel
Sheath: -
Notes:ER-ANT-B-B -
ExtremaRatio - MF1 BC knife - PRIVATE COLLECTION - tactical knife
Type: Previously Purchased
Condition: in excellent condition
Available in the market, currently in production
Sharpening: Factory standard
Blade marks: None
Handle marks: None
Box: Present
Sheath: Not applicable
Manuals, Certificates, and Warranties: ER
Checked and Certified by our internal laboratory
Intended use: Tactical/EmergencyType of production: Industrial
Blade Production: Italy
Blade: N690Co stainless steel, 58HRC
Blade Treatment: Testudo
Handle: Anticorodal
Blade length: 95mm
Blade thickness: 4mm
Closed length: 134mm
Total length: 225mm
Closed thickness: 24mm
Balance: Not applicable
Weight: 162g
Closure: Liner Lock
Clip: Stainless Steel
Sheath: Not applicable
Packaging: black cardboard box with Extrema Ratio logos
Notes: seat belt cutter, glass breaker, screwdriver for opticsAP-MF1-BC-CP -
Wander Tactical - Hurricane Knife Compound - Raw - Black Micarta - Artisanal Knife
Intended use: Tactical / Multirole
Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw
Handle: Micarta
Blade length: 110mm
Blade thickness: 5mm
Total length: 250mm
Balance: Rearward
Weight: 295g
Sheath: Thermoformed Kydex
Packaging: Certificate of warranty and authenticity
Note: Knife entirely handcraftedWT-HUR-RBM -
Zero Tolerance - ZT0006BLK - Limited Edition Sprint Run - CPM-3V & Black G10 - knife
Intended Use: Tactical / Sporting
Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market onlyZT0006BLK -
Wander Tactical - Uro Saw - Raw Finish and Brown Micarta - custom knife
Type of production: Artisan
Blade production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Iron Washed
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balancing: advanced
Weight: 466g.
Sheath: kydex
Packaging: -
Notes: Each knife is unique and handcraftedWT-URO-S-R-BR -
Benchmade - Bailout Knife Crater Blue Aluminum - CPM-M4 - Plain Tanto - 537FE-02 - knife
When you find yourself facing long distances, you need a knife that can do the same. Inspired and designed for tactical situations, the Bailout® pushes the concept of lightweight to the maximum. It boasts an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a tanto profile, this slim pocket tool achieves an optimal balance between strength and weight, making it suitable for both heavy-duty use and daily carry. The novelty for 2023 is the eye-catching combination of the Crater Blue handle and the Flat Dark Earth blade, creating a striking contrast.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cerakote®
Handle: Crater Blue anodized 6061-T6 aluminum
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 10.4mm
Weight: 70g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-537FE-02 -
Benchmade - Bailout Knife Black Aluminum - CPM-M4 - Serrated Tanto - 537SGY-03 - knife
When you find yourself facing challenging situations and need a knife that measures up, the Bailout® is what you need. Inspired and designed for tactical situations, this ultralight knife delivers maximum performance. It features an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a serrated tanto profile. This slim pocket tool offers a perfect balance between strength and weight, making it suitable for both heavy-duty and everyday use. New for 2023 is a discreet design version with a tungsten gray Cerakote blade and a black handle.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cerakote®
Handle: Black anodized 6061-T6 aluminum
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 10.4mm
Weight: 70g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-537SGY-03 -
Benchmade - Bailout Knife Black Aluminum - CPM-M4 - Plain Tanto - 537GY-03 - knife
When you find yourself facing challenging situations and need a knife that measures up, the Bailout® is what you need. Inspired and designed for tactical situations, this ultralight knife delivers maximum performance. It features an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a tanto profile. This slim pocket tool offers a perfect balance between strength and weight, making it suitable for both heavy-duty and everyday use. New for 2023 is a discreet design version with a tungsten gray Cerakote blade and a black handle.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cerakote®
Handle: Black anodized 6061-T6 aluminum
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 10.4mm
Weight: 70g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-537GY-03 -
ExtremaRatio - MF0 Drop Point Black - PRIVATE COLLECTION - folding knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially Available Available.
* Sharpening: Factory.
* Marks on blade: A couple of light marks on burnishing.
* Marks on handle: Slight signs of wear on hardware and clip.
* Box: Present, but not in perfect condition
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Tactical/Sporting
Production Type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924
Handle: Anticorodal (aluminum)
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 15mm.
Weight: 139g.
Closure: Liner Lock, with additional safety catch
Clip: stainless steel removable and reversible
Packaging: cardboard box with Extrema Ratio logosAP-MF0D-CP -
Zero Tolerance - Ken Onion Flipper Knife - ZT0200ST - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Condition: in excellent condition
Available in commerce: NO
Sharpening: Original
Marks on blade: YES - small marks
Marks on handle: NO
Packaging: YES, original box
Checked and Certified by our internal laboratory
Intended use: Tactical/MilitaryType of production: Industrial
Country of production: USA
Blade: In stainless steel 154CM
Blade finish: Tungsten DLC Coating
Handle: G10 with stainless steel liners
Blade length: 101mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 222mm.
Thickness when closed: 21mm.
Weight: 225g.
Closure: Liner Lock
Clip: Removable, reversible and multi-position, in stainless steel
Packaging: -
Notes: Design by Ken Onion - Opening system through Carson Flipper system - Knife out of production, withdrawn from private collection, like new, without boxAP-ZT0200ST -
ExtremaRatio - Police I knife - Multi-purpose 2 blades - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available NO
* Sharpness: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: YES
* Checked and Certified by our internal laboratoryType of production: Industrial
Country of production: Italy
Blade: in N690Co stainless steel
Finish: Testudo burnishing
Handle: Anodized aeronautical aluminum anticorodal
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 210mm.
Weight: 152g.
Sheath: -
Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificates
Notes: emergency blade with snap opening (length. 8 cm) - glass breaker - model from 2013 now out of productionER-AP-POLICE -
Benchmade - Bailout Knife - CPM-M4 - Tanto - Titanium Handle - Limited Edition - 537BK-2302 - knife
A perfect combination in the EDC paradise. The Bailout® holds a special place in the hearts of those who appreciate tactical toughness in their everyday carry, and now we're pairing this sleek and ultralight folding knife with the ultimate super-material: titanium.
The all-new limited edition 537BK-2302 Bailout® features the much-loved CPM-M4 tanto blade, now in cobalt black Cerakote, but the star of this show is its handle made of bead-blasted 6Al-4V titanium manufactured in the USA.
Accentuated with PVD-coated blue hardware, including a Crater Blue lanyard pommel, this edition is limited to 1000 pieces.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Origin: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cobalt Black Cerakote
Handle: 6AI-4V Titanium
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 9.7mm
Weight: 103g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited edition of 1000 piecesBM-537BK-2302 -
Ka-Bar - TDI Pocket Strike - Karambit Knife - 2491 - knife
Intended use: Tactical / EDC
Production type: Industrial
Country of manufacture: Taiwan
Blade: Full tang in AUS-8 57/59HRC stainless steel
Blade finish: Powder coated
Handle: Zytel
Blade length: 80mm.
Blade thickness: 3.7mm.
Total length: 197mm.
Weight: 117g. (172g. with sheath)
Sheath: ABS with clip
Notes: -KB-2491 -
Ka-Bar BK&T - Becker Harpoon Black Survival Knife - BK18BK - knife
Intended Use: Bushcraft / Outdoor
Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan BeckerColtelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.
KB-BK18BK -
Benchmade - Mini Freek - Cerakote CPM-M4 & Black/Gray G10 - 565BK-02 - knife
This one is for the fans! For years Benchmade has received countless requests to make a "Super Freek" mini, and it has listened to you loud and clear. The Mini Freek 565BK-02 takes everything you love about its full-size counterpart and reduces it to a more pocketable form, including the black CPM-M4 blade and instantly recognizable tricolor G10 handle. With unmistakable style and uncompromising strength, this Mini Freek is truly super.
Intended use: sporty
Type of production: industrial
Country of manufacture: USA
Blade: CPM-M4 62/64HRC stainless steel
Blade treatment: Cerakote
Handle: G10 with anodized aluminum spacers
Blade length: 76.2mm.
Blade thickness: 2.6mm.
Length closed: 102mm.
Total length: 179mm.
Weight: 82g.
Closure: AxisLock
Clip: Stainless steel, removable and reversible
Packaging: cardboard box with Benchmade logos
Notes: -BM-565BK-02 -
Boker Plus - Andhrimnir Mini Knife by Midgards knife - 02BO091 - knife
In Norse mythology, Andhrimnir tirelessly took care of the physical well-being of the gods and the honorably fallen heroes, who thoroughly enjoyed their existence in the carefree warriors' paradise, Valhalla.
For this purpose, he slaughtered the beast Sæhrimnir day after day, which was then resurrected at night to be eaten again the following day. A fleeting glance at Midgard (the Norse term for earth/world) would have elevated the chef's status even further in the eyes of the gods. This is because the knife craftsman Dirk Hofmeister knows like no other how to create mythical blades infused with Norse magic.
The Andhrimnir Mini bears the unmistakable hallmarks of Midgard's full tang constructed knives, with a 6mm thick Wharncliffe blade made of D2 in a two-tone finish with grooves on both sides and jimpings to ensure optimal functionality and maximum stability for all daily cutting tasks. The ergonomic and milled handles* made of G10 allow for comfortable and effortless work.
The custom-fitted Kydex sheath with a full-sized belt adapter, as well as a lanyard hole, harmoniously round off the package and revive the spirit of the Vikings in the fixed blade knife. * Other handles in a wide range of shapes and colors can be directly downloaded from us as a file for the home 3D printer or custom-made by Midgards Messer.
Intended use: Utility
Type of production: Industrial
Country of production: China
Blade: full tang in D2 steel
Blade finish: Dual tone (Satin + Black)
Handle: G10
Blade length: 85mm.
Blade thickness: 6mm.
Total length: 150mm.
Weight: 182g.
Sheath: In Kydex, with attachment
Packaging: Cardboard box with Boker Plus logos
Notes: Design by Midgards MesserBO-02BO091 -
Spartan Blades - Poros knife - G10 Green - 154CM - SFL11GR - knife
The POROS flipper was designed by Curtis Iovito as a robust and large-sized flipper. The high grind lines of this blade, combined with a sharp and penetrating tip, make it a reliable companion for everyday carry.
Its quick flipper action is assisted by IKBS bearings for that "Snap" you're looking for! Its distinctive scallops are not only beautiful to look at but also ensure a secure grip. The deep pocket clip maintains a low profile while keeping your blade ready for use when needed. The blade is made of 154CM stainless steel with a black titanium nitride coating; the SS hardware and liner have a black electroplated powder coating.
Intended use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in 154CM stainless steel 58/60 HRC
Blade treatment: Black Titanium Nitride Coating
Handle: OD Green G10
Blade length: 89mm.
Blade thickness: 4mm.
Closed length: 97mm
Total length: 230mm.
Weight: 147g.
Closure: Liner Lock
Clip: in stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos. Design: Curtis Iovito
Notes: The Field Grade series with Bronze-colored box identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFL11GR -
Spartan Blades - Ronin Shoto Folder Karambit - CTS-XHP - SFBL9BK - knife
The Spartan-Ronin Shōtō is a folding karambit knife with a liner lock. This blade is the result of a collaborative effort between Spartan Blades and TU Lam of Ronin Tactics, our former Special Forces colleague and dear friend.
Having worked throughout Asia and in Indonesia, both Tu Lam and Spartan hold a great respect for the Karambit style. This blade was designed to be incorporated into various martial arts systems.
It features a blade made of CTS-XHP, "Emerson Wave" function for easy opening, and a reversible pocket clip for left-hand carry; the black and red G10 grips ensure a secure grip. Please check this link to Ronin Tactics HERE.
All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or “OIBBS”. Our sintered bronze bearings are oil-impregnated, thereby reducing friction on the blade, offering you a tight but smooth blade opening.
Intended use: Collection / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in stainless steel CTS-XHP
Blade treatment: Satin Black Ti/Nitride Finish
Handle: G10
Blade length: 75mm.
Blade thickness: 3.2mm.
Closed length: 135mm
Total length: 200mm.
Weight: 179g.
Lock: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFBL9BK -
Spartan Blades - Spartan-Harsey Fighter - SBSL006BK - Knife
Produced in Olean, NY, in collaboration with the skilled people at KA-BAR knives, the Spartan-Harsey Fighter is born from the partnership between William W. Harsey Jr. and Spartan Blades. The intention behind this knife was to combine the blade of a US military combat/utility knife with the contoured handle that has become a hallmark of Mr. Harsey's designs. This knife is a no-nonsense combat blade.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: 1095 carbon steel 56/58HRC
Blade Finish: Black Powder Coating
Handle: Injection-molded Thermoplastic
Blade Length: 155mm
Blade Thickness: 4.9mm
Overall Length: 292mm
Weight: 334g
Sheath: Thermoplastic, with belt attachment and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by William W. Harsey Jr. - The Professional Grade series with Silver packaging identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience to keep prices affordable for the public without sacrificing USA-made production.SBSL006BK -
Spartan Blades - Machai knife Green - Fixed Blade Pro Grade- SBSL002BKGR - Knife
Machai - A fitting name for this large cutting tool. In Greek mythology, the Machai were the demons (spirits) of battle and combat.
The high weight and recurved profile of this flat ground blade make it an excellent hatchet. The Machai has a full-tang construction and a handle that ensures a forward balance in the user's hand.
The textured Micarta canvas ergonomic handle ensures a secure and comfortable grip, whether wet or dry. Made by the good people at KA-BAR Knives; in Olean, NY, USA.
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: in 1095 carbon steel 56/58HRC
Blade finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade length: 165mm.
Blade thickness: 4.8mm.
Total length: 295mm.
Weight: 308g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E compatible belt attachments and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by Iovito - The Professional Grade series with a Silver-colored box identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with the production experience of Ka-Bar to keep public prices affordable without having to give up a made in USA production.SBSL002BKGR -
Fox - TRIBAL K Fixed Karambit by Doug Marcaida - FX-803 - Knife
Intended Use: Tactical / Military
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Black Idroglider
Handle: G10
Blade length: 78mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 97g.
Sheath: kydex, with double Ulti-Clip attachment system
Packaging: cardboard box with Fox logos
Notes: Design by Doug MarcaidaFX-803 -
ExtremaRatio - Ferrum T knife - Black Warfare - knife
Ferrum T is a folding knife with a clear tactical connotation equipped with a spear point blade with lightening slot. It has a slim and compact shape, the two anodized anticorodal aluminum grips make up a light, slender and at the same time very resistant handle. It can be housed in a breast pocket, in small flashlight holsters or inside a single loop of the M.O.L.L.E. system.
Equipped with a flipper assisted opening system, the blade rotates on ball bearings which allow a smooth and uncertain movement of the blade. This mechanism allows the user to open the blade quickly and easily, even with just one hand. The locking system adopted is the well-tested liner lock. The reversible clip is positioned on the back.
Ferrum T is available in 2 versions: the first, FERRUM T Black Warfare, equipped with a black handle and Geotech Camo blade, the innovative and original Extrema Ratio camouflage pattern, created by laser engraving. The second, FERRUM T TACTICAL MUD, with anodized handle in the new gray-green color and blade with MIL-C-13924 bluing.
The reversible clip is positioned on the back.
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade Finish: Black
Handle: Rough Anticorodal
Blade length: 73mm.
Blade thickness: 3mm.
Closed length: 90mm.
Total length: 184mm.
Weight: 86g.
Closure: Liner Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Note: -ER-FE-T-BW -
ExtremaRatio - Ferrum T Black knife - Tactical Mud - knife
Ferrum T is a folding knife with a clear tactical connotation equipped with a spear point blade with lightening slot. It has a slim and compact shape, the two anodized anticorodal aluminum grips make up a light, slender and at the same time very resistant handle. It can be housed in a breast pocket, in small flashlight holsters or inside a single loop of the M.O.L.L.E. system.
Equipped with a flipper assisted opening system, the blade rotates on ball bearings which allow a smooth and uncertain movement of the blade. This mechanism allows the user to open the blade quickly and easily, even with just one hand. The locking system adopted is the well-tested liner lock. The reversible clip is positioned on the back.
Ferrum T is available in 2 versions: the first, FERRUM T Black Warfare, equipped with a black handle and Geotech Camo blade, the innovative and original Extrema Ratio camouflage pattern, created by laser engraving. The second, FERRUM T TACTICAL MUD, with anodized handle in the new gray-green color and blade with MIL-C-13924 bluing.
The reversible clip is positioned on the back.
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade Finish: Black
Handle: Rough Anticorodal
Blade length: 73mm.
Blade thickness: 3mm.
Closed length: 90mm.
Total length: 184mm.
Weight: 86g.
Closure: Liner Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Note: -ER-FE-T-TM -
Fox - Tokala Fixed Knife - Bison Micarta - FX-105MB - Design by Reichart Markus - knife
Intended use: Utility / Tactical / Outdoor
Type of production: Industrial
Country of production: Italy
Blade: Niolox 59/61HRC stainless steel with Black Idroglider finish
Handle: Bison Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balancing: advanced by 1cm
Weight: 235g.
Sheath: leather
Packaging: cardboard box with Fox logos
Note: -FX-105MB -
ExtremaRatio - BF1CD - Black Rough - knife
Intended Use: Tactical / EDC
Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924
Handle: Rough Anticorodal
Blade Length: 70mm.
Blade thickness: 3mm.
Length closed: 99mm.
Total length: 168mm.
Weight: 85g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: -ER-BF1CDBR -
Benchmade - Bugout Axis - Cerakote & Alpine Glow - 535BK-06 - knife
The Bugout® is designed for the modern outdoor adventurer, incorporating the lightest, highest-performance materials into an extremely slim, ergonomic package. The CPMS30V blade steel and Benchmade's AXIS assisted locking technology can tackle any task. Made in the United States.
Intended Use: Sporting / EDC
Type of production: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC
Blade finish: Cerakote
Handle: CF-Elite (Grivory)
Blade length: 82mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 189mm.
Thickness when closed: 10.5mm
Weight: 52g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logosBM-535BK-06 -
Benchmade - Bugout Axis - Cerakote & Storm Gray - 535BK-08 - knife
The Bugout® is designed for the modern outdoor adventurer, incorporating the lightest, highest-performance materials into an extremely slim, ergonomic package. The CPMS30V blade steel and Benchmade's AXIS assisted locking technology can tackle any task. Made in the United States.
Intended Use: Sporting / EDC
Type of production: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC
Blade finish: Cerakote
Handle: CF-Elite (Grivory)
Blade length: 82mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 189mm.
Thickness when closed: 10.5mm
Weight: 52g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logosBM-535BK-08 -
Spartan Blades - Moros Knife - Kydex, DLC Flat Black and Black Micarta - SB53BKBKKYBK - knife
The Moros is an excellent choice for field or tactical use. This well-balanced blade is the perfect blend of size and performance. It's light enough to carry around without hassle, yet sturdy enough to handle a range of everyday tasks. The tip profile is flat with a tapered upper edge ensuring excellent cutting with good penetrating force. The full tang and grip of the Moros provide a neutral balance, making it light in the hand. The ergonomic and textured Micarta canvas grip ensures a comfortable and secure grip whether dry or wet.
After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had been designing and drawing knives for friends in special forces for years, and Mark, who had always dealt with military and tactical equipment while working in the "Green Berets," decided to combine their skills and passion with the goal of building innovative and functional knives using high-quality materials and entirely made in the United States.
Intended use: Tactical/Military
Type of production: Mid Tech
Country of production: USA
Blade: in CPM-S45VN stainless steel 59/61HRC
Blade finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 134mm.
Blade thickness: 4.8mm.
Total length: 254mm.
Balance: on the guard branch
Weight: 203g.
Sheath: thermoformed in Kydex
Packaging: Cardboard box with Spartan Blades logosSB53BKBKKYBK -
Spartan Blades - Moros - Kydex, DLC Flat Black and Green Micarta - SB53BKGRKYBK - knife
The Moros is an excellent choice for field or tactical use. This well-balanced blade is the perfect blend of size and performance. Light enough to carry without bothering, yet strong enough to handle a variety of daily tasks. The tip profile is flat with a tapered top edge that provides an excellent cut with good penetration force. The Moros' solid tang and handle provide neutral balance, making it light in the hand. The ergonomic, textured Micarta canvas handle provides a comfortable and secure grip when dry or wet.
After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.
Intended Use: Tactical/Military
Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade Finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 134mm.
Blade thickness: 4.8mm.
Total length: 254mm.
Balance: on the guard branch
Weight: 203g.
Sheath: thermoformed Kydex.
Packaging: cardboard box with Spartan Blades logos
Notes: Design by Curtis IovitoSB53BKGRKYBK -
Ka-Bar - USMC Fighting Knife 125th Anniversary Special Edition - 9226 - knife
The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for U.S. troops in World War II and since then its effectiveness has been universally recognized and employed in many other military scenarios. With this special edition, Ka-Bar celebrates the company's 125th anniversary.
Intended Use: Tactical/Military
Blade: 1095 carbon steel 56/58HRC
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: backward
Weight: 305g.
Sheath: leather
Notes: special edition to celebrate the company's 125th anniversaryKB-9226 -
Benchmade - Full Immunity - Woodland Green - 290BK-2 - knife
When blade length is limited, the need is not. Designed for easy carry and compactness, the Full Immunity™ features a less than 2.5-inch CPM-M4 blade with a Cobalt Black Cerakote® finish that boasts exceptional edge retention and strength in a Wharncliffe profile that tapers to an ultra-fine point. The included lanyard speeds retrieval from the pocket for manual use in emergency situations. Finished with anodized aluminum handles, the Full Immunity™ is a concentration of utility in a compact configuration.
Intended Use: Tactical
Type of production: Industrial
Country of manufacture: USA
Blade: CPM-M4 62/64 HRC carbon steel
Blade finish: cobalt black cerakote
Handle: Aluminum
Blade length: 63mm.
Blade thickness: 2.3mm.
Length closed: 87mm.
Total length: 150mm.
Thickness when closed: 12.7mm.
Weight: 65g.
Closure: AXIS Lock
Clip: Tip Up, stainless steel, removable and reversible, mini deep carry type
Packaging: Cardboard box with Benchmade logos
Notes: -BM-290BK-2 -
Benchmade - Full Immunity - Flat Dark Earth - 290BK-1 - knife
When blade length is limited, the need is not. Designed for easy carry and compactness, the Full Immunity™ features a less than 2.5-inch CPM-M4 blade with a Cobalt Black Cerakote® finish that boasts exceptional edge retention and strength in a Wharncliffe profile that tapers to an ultra-fine point. The included lanyard speeds retrieval from the pocket for manual use in emergency situations. Finished with anodized aluminum handles, the Full Immunity™ is a concentration of utility in a compact configuration.
Intended Use: Tactical
Type of production: Industrial
Country of manufacture: USA
Blade: CPM-M4 62/64 HRC carbon steel
Blade finish: cobalt black cerakote
Handle: aluminum
Blade length: 63mm.
Blade thickness: 2.3mm.
Length closed: 87mm.
Total length: 150mm.
Thickness when closed: 12.7mm.
Weight: 65g.
Closure: AXIS Lock
Clip: Tip Up, stainless steel, removable and reversible, mini deep carry type
Packaging: Cardboard box with Benchmade logos
Notes: -BM-290BK-1 -
Benchmade - Full Immunity - Crater Blue - 290BK - knife
Intended Use: Tactical
Type of production: Industrial
Country of Production: USA
Blade: carbon steel CPM-M4 62/64 HRC
Blade finish: cobalt black
Handle: aluminum
Blade length: 63mm.
Blade thickness: 2.3mm.
Length closed: 87mm.
Total length: 150mm.
Thickness when closed: 12.7mm.
Weight: 65g.
Closure: AXIS Lock
Clip: Tip Up, stainless steel, removable and reversible, mini deep carry type
Packaging: Cardboard box with Benchmade logos
Notes: -BM-290BK -
Fox - PIKAL - Folding Karambit by Giuliano Ron - FX-826 - Knife
The Fox Pikal is a folding tactical knife specifically designed for martial arts practitioners. It was created with the collaboration of the personal defense instructor Giuliano Ron who, after two years of severe tests, combined the advantages of the Pikal style (handle with blade pointing down and edge facing the person) with the Karambit (rear ring for the index)
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Black Idroglider
Handle: G10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 182mm.
Weight: 113g.
Clip: reversible and removable, in painted stainless steel
Packaging: Cardboard box with Fox logos
Notes: Design by Giuliano RonFX-826 -
Fox - TRIBAL K - Karambit Knife by Doug Marcaida - FX-802
Intended use: Tactical / Collection
Production type: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Black Idroglider
Handle: G10
Blade length: 50mm of cutting edge and 70mm of blade
Blade thickness: 3mm
Overall length: 150mm
Weight: 105g
Clip: Steel
Packaging: Cardboard box with Fox logos
Notes: Design by Doug MarcaidaFX-802 -
Boker Plus - Rhino by Vox - All Black Copper - 02BO085 - knife
Intended Use: Sporting / Light Utility
Production type: Industrial
Country of Production: China
Blade: full tang, D2 steel
Blade finish: TPFE
Handle: Micarta and Copper
Blade length: 76mm.
Blade thickness: 3.7mm.
Total length: 155mm.
Weight: 103g.
Sheath: kydex, with Tek-Lok type multi-position attachment
Packaging: cardboard box with Boker Plus logos
Notes: Design by Jesper VoxnaesBO-02BO085 -
Master of Defense - Hornet Black Serrated - James Keating Design - PRIVATE COLLECTION - folding knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight: a few small scratches and abrasions on corners and clip; small oxidation marks on hardware
* Box: Present and original (full set).
* Scabbard: -
* Manuals, Certificates and Warranties: Present (full set)
* Checked and Certified by our in-house laboratory
Tactical knife/EDC produced in the late 1990s and designed by martial arts expert James Keating,
Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.
Intended Use: Tactical/Collection
Production Type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 75mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 13mm
Weight: 90g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Master of Defense logosMOD-HORNET-CP -
Kershaw - Covalent - DuraLock KVT Flipper Knife - 2042 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: BlackWash
Handle: GRN (Glass Reinforced Nylon)
Blade length: 81mm.
Blade thickness: 2.7mm.
Length closed: 112mm.
Total length: 193mm.
Thickness when closed: 12.4mm.
Weight: 79g.
Opening: rapid Carson Flipper system
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opening via carson-flipper system on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)K2042 -
Kershaw - Monitor - DuraLock KVT Flipper Knife - 2041 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Black Oxide
Handle: GRN (Glass Reinforced Nylon)
Blade length: 76mm.
Blade thickness: 2.3mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 12.4mm.
Weight: 77g.
Opening: rapid Carson Flipper system
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opening via carson-flipper system on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)K2041 -
Boker Plus - Kalashnikov AK101 2.0 Flipper - 01KAL105N - folding knife
ntended Use: Tactical / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Teflon coated
Handle: Aluminium
Blade length: 120mm.
Blade thickness: 3.5mm.
Total length: 250mm.
Weight: 202g.
Clip: Stainless steel, removable and reversible
Closure: liner lock
Packaging: cardboard box with Kalashnikov logos
Notes: -BO-01KAL105N -
Boker Plus - Desertman - 12C27 Sandy Brown TPR - 02BO083 - fixed blade knife single edge
Intended Use: Outdoor / Bushcraft / Light Utility
Production type: Industrial
Country of Production: Taiwan
Blade: hidden tang made of Sandvik 12C27 stainless steel
Blade Finish: Titanium coating
Handle: Injection molded polymers (brown TPR and black GRP)
Blade length: 115mm.
Blade thickness: 4.2mm.
Total length: 242mm.
Weight: 210g.
Sheath: polymer and Nylon
Packaging: cardboard box with Boker Plus logos
Notes: -BO-02BO083 -
Boker Plus - Hel Folding Karambit by A. De Santis - Black G10 - 01BO515 - knife
As a Filipino martial arts enthusiast, Italian knife designer Alessandra De Santis of Hydra Design decided to design a Karambit knife for Boker Plus. These sickle-shaped knives originated in Southeast Asia and were preferably used for harvesting rice. In contrast, the Karambit from Boker Plus comes in a tactical guise. The black-coated 154CM Hawkbill blade effortlessly slices its way through cardboard and ropes, while the black G10 handle and sturdy linerlock provide much-needed safety on the job.
Light weight and high efficiency form the backbone of the pocket knife named after the Norse goddess of the underworld. As an alternative to the flipper opening, the knife offers a thumb stud screwed into the back of the blade whose shape also serves as an "Emerson Wave"-style opening. Alessandra De Santis' characteristic angular design elements are found in the G10 ring at the end of the handle. The flush, reversible clip allows for flexible knife carrying. Supplied with a high-quality nylon pouch.
Intended Use: Tactical
Production type: Industrial
Country of manufacture: Taiwan
Blade: stainless steel 154CM
Blade treatment: black coating
Handle: G10
Blade length: 61mm.
Blade thickness: 2.8mm.
Total length: 170mm.
Weight: 93g.
Clip: removable and reversible, stainless steel
Closure: LinerLock
Packaging: zippered nylon pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings and via "Emerson Wave" style pin - design by Alessandra De SantisBO-01BO515 -
Fox - Veleno - Black Top Shield - FX-596 - Single Edge Fixed Blade Knife - Made in Italy
The knife echoes one that Fox Knives created at the request of GIS, Gruppo di Intervento Speciale dell'Arma dei Carabinieri, Italian special forces. The design of Veleno stems from a reinterpretation of the ceremonial dagger made more appealing thanks to the materials: blade in N690 steel with Top Shield® finish and aluminum handle finished in black color that recalls the color that distinguishes the weapon group.
Intended Use: Tactical / Collection
Production Type: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co
Blade treatment: Black Top Shield
Handle: Aluminum
Blade length: 170mm.
Blade thickness: 6mm.
Total length: 300mm.
Weight: 223g.
Sheath: handmade, vegetable-tanned Tuscan leather
Packaging: cardboard box with Fox logos
Notes: numbered on box and on bladeFX-596 -
Fox - Moa - Folding Karambit by Jared Wihongi - FX-653 - Knife - Made in Italy
Intended Use: Tactical / Military
Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 190mm.
Weight: 120g.
Locking system: Liner Lock, with additional safety.
Clip: removable and reversible, painted stainless steel
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)FX-653 -
Fox - Toa - Fixed Karambit by Jared Wihongi - FX-652 - Knife - Made in Italy
Intended Use: Tactical / Military
Type of production: Industrial
Country of Production: Italy
Blade: full tang in stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 180mm.
Weight: 120g.
Sheath: kydex, with Tek-Lok-like attachment
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)FX-652 -
Fox - Moa - Fixed Karambit by Jared Wihongi - FX-651 - Knife - Made in Italy
Intended Use: Tactical / Military
Production type: Industrial
Country of Production: Italy
Blade: full tang in stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 180mm.
Weight: 130g.
Sheath: kydex, with Tek-Lok-like attachment
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)FX-651 -
Cold Steel - Leatherneck Bowie - D2 Black - FX-LTHRNK - knife
Intended Use: Tactical / Heavy Duty
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Black Powder Coating
Handle: made of Griv-Ex polymer, with steel pommel
Blade length: 267mm.
Blade thickness: 5mm.
Total length: 387mm.
Balance: Advanced
Weight: 474g.
Sheath: Secure-Ex ABS
Packaging: Cardboard box with Cold Steel logos
Notes: -CSFX-LTHRNK -
Fox - AKA Spear Point by D. Simonutti - Elmax Top Shield - FX-554B - knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Italy
Blade: full tang, stainless steel Elmax 60/62 HRC
Blade treatment: Black Top Shield
Handle: G-10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 140mm.
Weight: 60g.
Sheath: made of Kydex, with Ulti-Clip attachment
Packaging: cardboard box with Fox logos
Notes: Design by Denis SimonuttiFX-554B -
Fox - AKA Drop Point by D. Simonutti - Elmax Top Shield - FX-553B - knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Italy
Blade: full tang, stainless steel Elmax 60/62 HRC
Blade treatment: Black Top Shield
Handle: G-10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 140mm.
Weight: 65g.
Sheath: made of Kydex, with Ulti-Clip attachment
Packaging: cardboard box with Fox logos
Notes: Design by Denis SimonuttiFX-553B -
ExtremaRatio - Waki Black Machete Knife - Tactical Knife
The product is an elaboration of the Japanese Wakizashi sword, a typical blade 30 to 60 centimeters long, which the Samurai carried at all times in contact with the body, where the Katana was carried exclusively in battle. The blade produced from Boehler N690 steel is hardened to 58HRC while the handle is made of forprene, an elastomer that falls under the "NATO standard" for resistance to extreme conditions. The Waki Black comes with a cordura, military-derived scabbard that ensures safe carrying of the razor-sharp blade and its protection from shocks that could reduce its efficiency. The scabbard is also equipped with the MOLLE system that allows it to be carried on tactical vests and general belts.
Intended Use: Tactical/MacheteType of production: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co at 58HRC
Blade Treatment: Burnishing MIL-C-13924
Handle: Forprene
Blade Length: 297mm.
Blade thickness: 6.5mm. tapering to 4mm from the handle.
Total length: 456mm.
Weight: 384g.
Sheath: cordura, compatible with M.O.L.L.E. systems.
Packaging: cardboard box with Extrema Ratio logos
Notes: -ER-WA-BK -
Cold Steel - Leatherneck Bowie - Lynn Thompson Limited Edition - 39LSFCAA - knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Stonewashed
Handle: made of Griv-Ex polymer, with steel pommel
Blade length: 267mm.
Blade thickness: 5mm.
Total length: 387mm.
Balance: Advanced
Weight: 474g.
Sheath: Secure-Ex ABS
Packaging: Cardboard box with Cold Steel logos
Notes: Limited and numbered edition with serial number engraved on blade and with Lynn Thompson's autograph on boxCS39LSFCAA -
Boker Plus - Micro Tracker Knife by Dave Wenger - 02BO076 - knife
The distinctive design, the Tracker concept with two separate blades, the impact-resistant 1095 carbon steel and the remarkable price-performance ratio quickly made Dave Wenger's Boker Plus Mini Tracker a top seller in the bushcraft and outdoor scene. While the front of the larger Tracker variants is primarily suitable for chopping and splitting, the blade shape of the smaller size of the new Boker Plus Micro Tracker shows completely different advantages and qualities.
The Micro Tracker shares the benefits of two sharpening angles on one blade with its bigger brothers. Additionally, the front half of the blade in the smaller format is great for working on a chopping board and the sturdy tip is great for opening boxes in everyday use. The small nose, which separates the two grinds, pulls hard when cutting in soft materials and is predestined for cutting ropes, lines and belts.
The field and 3D archer appreciates the compact size, powerful point and archaic look when working out the wrong arrows. The Boker Plus Micro Trapper has the same indestructible materials and finish as the Mini Tracker.
The three hollow brass studs carefully recessed and chamfered into the handle add visual flair. Supplied with a belt adapter and sheath
Intended use: Utility
Type of production: Industrial
Country of production: Taiwan
Blade: 1095 steel ful tang
Blade finish: powder coat
Handle: Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 190mm.
Weight: 159g.
Sheath: Kydex
Packaging: cardboard box with Boker Plus logos
Notes: Design by Dave WengerBO-02BO076 -
Boker Plus - Dave Wenger Tracker knife - 02BO073 - knife
The Boker Plus Mini Tracker, designed by Dave Wenger, has quickly become a favorite in the bushcraft camping and dust scene, as a sturdy outdoor activity knife thanks to the massive 1095 carbon steel blade and corrosion resistant coating. The large Boker Plus Tracker is following in the footsteps of the small ... same materials, same features, but with unmatched performance! The massive survival knife blade features two different bevel surfaces, ideal for cutting, scraping, digging and prying. The optimal balance between the thickness, the length of the blade and the ergonomic shape of the finely worked micarta handle, allow you to work effortlessly even in extreme environments. The handle has three decorative brass hollow rivets, the back of which can be used as a lanyard hole. Supplied with a belt adapter and a custom made Kydex sheath.
Intended use: Utility
Type of production: Industrial
Country of production: Taiwan
Blade: 1095 steel ful tang
Blade finish: a powder cover
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5mm.
Total length: 310mm.
Weight: 469 g.
Sheath: in the Kydex
Packaging: cardboard box with Boker Plus logos
Note: design by Dave WengerBO-02BO073 -
Cold Steel - Luzon Black & OD Green - Medium Flipper - 20NQL-ODBK - knife
Intended Use: Sporting/Tactical
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: Black Tuff-Ex coating
Handle: GFN (Glass Filled Nylon)
Blade length: 102mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 229mm.
Weight: 101g.
Closure: Liner Lock with additional safety catch on the right handle
Clip: removable, made of GFN (Glass Filled Nylon)
Packaging: cardboard box with Cold Steel logos
Notes: Carson Flipper opening systemCS20NQL-ODBK -
Cold Steel - SRK Compact OD Green - Survival Rescue Knife - 49LCKD-ODBK - knife
Intended Use: Tactical / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: SK-5 carbon steel
Blade finish: Black Tuff-Ex coating
Handle: Kray-Ex (Kraton)
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 241mm.
Balance: backward
Weight: 142g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logosCS49LCKD-ODBK