military and tactical knives

Intended use: Chopper / Machete

Type of production: Industrial
Production Lama: Italy
Blade: stainless steel, hardened to 54HRC N690Co
Treatment Lama: Testudo
Handle: Forprene
Blade length: 280mm.
Blade thickness: 4mm.
Length closed: -
Overall length: 450mm.
Thick when closed: -
Balancing: -
Weight: 370g.
Closing: -
Clip: -
Sheath: Nylon with attacks belt and MOLLE type
Packaging: Cardboard box with logos Extrema Ratio
Notes: Studied and designed to sever the thick vegetation broadleaf, typical of tropical forests and rainforests.

WAKI XXV ANNIVERSARIUM LIMITED EDITION is a limited series version of only 150 pieces that keeps all the features of the famous Waki model intact.

This product is an elaboration of the Japanese Wakizashi sword, a typical blade 30 to 60 centimeters long, which the Samurai always carried in contact with the body, where the Katana was carried exclusively in battle.

The blade has the classic Japanese Tanto profile and is made of Böhler N690 steel with heat treatments that raise its hardness to 58 HRC for the best combination of edge hold and strength. The blade, with flat rounding, features a precious satin finish.

The handle, in black coloring, is made of Forprene while The black-colored Cordura sheath is equipped with a MOLLE system that ensures safe carrying of the razor-sharp blade by protecting it from shocks that could reduce its efficiency.

WAKI XXV ANNIVERSARIUM LIMITED EDITION comes in an IP67-certified watertight Polypropylene technical case with pressurization valve that is weather, dust and shock resistant. Also inside is a metal plaque with the numbering of the limited series of 150 and a commemorative coin of the twenty-fifth Extrema Ratio anniversary.

Intended Use: Collection / Tactical / Machete

Production type: Industrial
Country of manufacture: Italy
Blade: N690Co stainless steel at 58HRC
Blade Treatment: Satin finish
Handle: Forprene
Blade Length: 297mm.
Blade thickness: 6.5mm. tapering to 4mm from the handle.
Total length: 456mm.
Weight: 384g.
Sheath: cordura, compatible with M.O.L.L.E. systems.
Packaging: polypropylene case with numbered metal plaque and commemorative coin with Extrema Ratio logos
Notes: Limited and numbered edition made in only 150 pieces

Intended Use: Tactical/Military/Survival

Type of production: semi industrial
Blade: full tang in carbon steel 1095 58HRC
Blade finishing: Camouflage
Handle: Micarta
Blade length: 260mm.
Blade thickness: 6mm.
Total length: 425mm.
Balance: Advanced
Weight: 735g.
Sheath: Nylon
Notes: Design By Xtreme Survivalist & Adventurer EJ Snyder.

Designed by Dan Maragni, the Ontario SP53 Bolo Knife features a 25cm bolo-style blade made of 5160 steel with an epoxy powder coating. The Bolo SP53 knife comes complete with a MOLLE compatible black tactical sheath and is made in the USA.

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 Carbon Steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 257mm.
Blade thickness: 6.4mm.
Total length: 384mm.
Balancing: advanced
Weight: 940g.
Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 250mm.
Blade thickness: 6mm.
Total length: 380mm.
Balancing: advanced
Weight: 425g.
Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

Intended use: Tactical / Military / Survival

Type of production: semi industrial
Blade: full tang in 1095 58HRC carbon steel
Blade finish: Black Traction Coating
Handle: Micarta
Blade length: 200mm.
Blade thickness: 6mm.
Total length: 345mm.
Balancing: advanced
Weight: 449g.
Sheath: Nylon
Notes: design by Laci Szabo

Intended use: Tactical / Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang, in 5160 carbon steel
Blade finish: Cerakote
Handle: Micarta
Blade length: 254mm.
Total length: 406mm.
Balancing: Advanced
Weight: 655g.
Sheath: Nylon and Polyester
Packaging: Cardboard box with Buck logos
Note: -

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton with steel guard
Blade length: 245mm.
Blade thickness: 6.8mm.
Total length: 380mm.
Balancing: advanced
Weight: 620g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 255mm.
Blade thickness: 6.5mm.
Total length: 385mm.
Balancing: advanced
Weight: 642g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with Ontario Knife Company logos
Note: -

Collini Cutlery is the official distributor for Italy of tactical knives / collection made in the USA Chris Reeve

Made at the Blade Show in 2014 in a limited edition of only 500 pieces worldwide, the impofu (eland antelope, Lungu in Zulu) is a fixed blade knife largest and most impressive ever produced by Chris Reeve.

Use: Collection / Heavy Utility

Type of production: semi-homemade
Blade: Stainless Steel Tool CPM-3V 58 / 60HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 254mm.
Blade Thickness: 6.8mm.
Length closed: -
Overall length: 413mm.
Balancing: Advanced
Weight: 573g.
Closed: -
Sheath: Black Leather by Gfeller Casemakers
Notes: Production limited to 500 pieces worldwide - Certificate of Authenticity and warranty

Intended use: Survival / Collection

Blade: stainless steel
Lama Lama production
Handle: Dark brown leather
Blade length: 290mm.
Blade thickness: 7mm.
Length closed: -
Total length: 460mm.
Balancing: advanced to 4 cm.
Weight: 1.098g.
Closure: -
Clip: -
Sheath: in leather
Notes: Official reproduction with movie license

Kukri - Gurkha Army

Nepal's national weapon and its Gurkha warriors are distinguished by their sharp curved blade in the lathe and the weight shift towards the tip that allows very effective gaiters. The grip is straight, no guard. Characteristic is the ricotta (kauri) and the leather sheath covered with two small knives (karda and chakmak).

Blade: Carbon steel
Manicure: black polished horn
Blade length: 265 mm.
Blade thickness: 10 mm.
Total length: 390 mm.
Weight: g.
Sheath: leather and wood, handmade
Notes: Every knife is handmade in Nepal and also includes two small knives.

Kukri - Operation Iraqi Freedom

Arma nazionale del Nepal e dei suoi guerrieri Gurkha, si distingue per la sua lama ricurva affilata nel latoconcavo e per lo spostamento del peso verso la punta che consente fendenti molto efficaci. L’impugnatura è diritta, senzaguardia. Caratteristico il ricasso (kauri) e il fodero di legno ricoperto di cuoioin cui sono contenuti anche due piccoli coltelli (karda e chakmak).

Lama: full tang in Acciaio al carbonio
Manicatura: Legno
Lunghezza lama: 275mm.
Spessore della lama: 10mm.
Lunghezza totale: 415mm.
Peso: 710g.
Fodero: in cuoio e legno, realizzato a mano
Note: ogni coltello e' interamente realizzato a mano in Nepal e comprende anche due piccoli coltelli.

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: single engraved, black line
Manicure: Black horned horn engraved and polished
Finishes: Brass
Blade length: 275 mm.
Blade thickness: 10 mm.
Total length: 400 mm.
Karda: 110 mm.
Chakmak: 105 mm.
Weight: 505g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Blade: Carbon steel
Conformation: Flat blade
Kauri: Discovered
Aunlo-Bal: single black line engraved
Manicure: Black horn of polished and engraved buffalo
Finishes: Brass
Blade length: 260 mm.
Blade thickness: 9 mm.
Total length: 380 mm.
Karda: 120 mm.
Chakmak: 115 mm.
Weight: 490g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Destinazione d'uso: Survival/Collezione

Lama: in acciaio al carbonio 1060
Produzione Lama Cina
Manicatura: Cuoio nero
Lunghezza lama: 290mm.
Spessore della lama: 7mm.
Lunghezza chiuso: -
Lunghezza totale: 460mm.
Bilanciatura: avanzata a 4 cm.
Peso: 820g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: edizione a tiratura limitata con firma di "Sylvester Stallone" su lama e fodero.

Intended use: Outdoor

Type of production: Industrial
Lama production: USA
Blade: 5160 carbon steel
Blade treatment: Powder Coat
Handle: Micarta
Blade length: 265mm.
Blade thickness: 4.7mm.
Total length: 425mm.
Balancing: -
Weight: 622g.
Sheath: in Nylon with MOLLE attachments.
Packaging: cardboard box with Ontario Knife Company logos
Note:

Purpose of use: Survival / Collection

Blade: Stainless Steel 420J2
Manicure: Aluminum and Paracord
Blade Length: 255mm.
Blade thickness: 5.5mm.
Handle Length: 100mm.
Total Length: 395mm.
Balance: Advanced, 2cm. From the lower guard branch
Weight: 504g.
Closure: -
Clip: -
Sheath: in leather
Notes: Compass with survival kit in the handle, in the sheath.